diff options
Diffstat (limited to 'util/cisco-load.exp')
| -rw-r--r-- | util/cisco-load.exp | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/util/cisco-load.exp b/util/cisco-load.exp deleted file mode 100644 index 58277e2..0000000 --- a/util/cisco-load.exp +++ /dev/null @@ -1,331 +0,0 @@ -## -## Copyright (C) 1997-2001 by Henry Kilmer. -## All rights reserved. -## -## This software may be freely copied, modified and redistributed without -## fee for non-commerical purposes provided that this copyright notice is -## preserved intact on all copies and modified copies. -## -## There is no warranty or other guarantee of fitness of this software. -## It is provided solely "as is". The author(s) disclaim(s) all -## responsibility and liability with respect to this software's usage -## or its effect upon hardware, computer systems, other software, or -## anything else. -# -# this expect snipit is sourced by clogin (-s option) to load a configuration -# file (named <routername>-confg into nvram from an rcp/tftp host. this is an -# _example_ as it not guaranteed to work for all applications. PLEASE test -# for your environment. -# -# it expects the following variables via the -E option: -# rcphost ='host to rcp from' such as 'foo.org' or '192.168.0.1' -# confgpath ='path under /tftpboot where configs are held' -# -# the config file is expected to be routername-confg, where routername is the -# name as grok'd from the router's cmd-line prompt -# -# example usage: -# % clogin -s ./cisco-load.exp -Ercphost=foo.shrubbery.net router -# router -# loading router config from foo.shrubbery.net -# -# keep in mind that it is important to NOT polute the global variable space. -# particularly, do not use variables used within clogin. this may result in -# indeterministic results. an easy way to avoid this is to use a variable -# name prefix (like 'E' or '_'). -# -# useful variables from clogin global space: -# router router name as provided on the cmd-line -# prompt cmd-line prompt as determined by clogin -# -# note: the tcl/expect parser is extremely stoopid. comment lines are NOT -# completely ignored!! so, a '{' or '}' in a comment might produce -# unexpected results. -## -# log_user 1 -# exp_internal 1 - -# sometimes this is a bit slow. note: this overrides clogin -t -set timeout 90 - -# take rcp host from -Ercphost='foo' -if ([info exists Ercphost]) { - #puts "CONFGHOST == $Ercphost" - set confghost [string tolower $Ercphost] -} else { - send_error "ERROR: -Ercphost= was not set on the command-line.\n" - exit -} - -# -# logout of the router -# -proc logout { ecode } { - global prompt - - send "quit\r" - expect { - "$prompt" { logout $ecode } - timeout { send_error "Error: timeout waiting for EOF after quit\n"} - eof { - send_user "\n" - exit $ecode } - } -} - -# -# erase the nvram -# -proc erase { } { - global prompt - - send "\r" - expect $prompt {} - send "write erase\r" - expect { - -re " Continue\[^\n\]\*confirm\]" { - send "\r" - exp_continue } - "$prompt" { } - timeout { - send_error "Error: timeout waiting for write erase.\n" - logout 1 } - eof { logout 1 } - } -} - -# -# load a config via rcp into nvram -# -proc doload { confghost routername config retry } { - global prompt - - # send a return just to be sure we have a prompt. - send "\r" - expect "$prompt" - # start the copy and send the host to load from - # use tftp if retry == 1 - if { $retry == 0 } { - send "copy tftp startup-config\r" - } else { - send "copy rcp startup-config\r" - } - expect { - timeout { - send_error "\nError: timeout exceeded waiting for rcp/tftp host prompt\r" - logout 1 } - "mbiguous command" { - if { $retry == 0 } { - send "copy tftp: startup-config\r" - } else { - send "copy rcp: startup-config\r" - } - exp_continue } - -re "Host or network .*\]\?" { - send "host\r" - exp_continue } - "\]\?" { - send "$confghost\r" } - } - - # - # fill in the rest of the blanks. username (12.0), filename, dest, etc. - # - expect { - -re "Source username .\*\]\?" { - send "$routername\r"; - exp_continue } - -re "Source filename .\*\]\?" { - send "$config\r"; - exp_continue } - -re "Name of configur.\*\]\?" { - send "$config\r"; - exp_continue } - -re "Destination filename .\*\]\?" { - send "startup-config\r"; - exp_continue } - -re "Configure using .\*confirm\]" { send "\r" } - "proceed\? \\\[" { send "yes\r" } - -re "Do you want to over write.\*confirm\]" { send "\r" } - -re "Accessing (rcp|tftp):" { } - timeout { - send_error "\n\tError: timeout exceeded while matching load prompts\n"; - send "" } - } - - expect { - timeout { - send_error "Error: timeout exceeded while loading config\n" - logout 1 } - -re "\[^\n\]*Connection refused" { - send_error "Error: $expect_out(0,string)\n" - logout 1 } - -re "\[^\n\]*Destination unreachable" { - send_error "Error: $expect_out(0,string)\n" - logout 1 } - -re "\[^\n\]*Permission denied" { - send_error "Error: $expect_out(0,string)\n" - logout 1 } - -re "\[^\n]*No such file or directory" { - send_error "Error: $expect_out(0,string)\n" - logout 1 } - -re "\[^\n]*Error copying\[^\n]*Not enough space on device\[^\n]*\r" { - send_error "Error: $expect_out(0,string)\n" - if { $retry == 2 } { -# erase stomps ssh rsa key -# send_user "erasing nvram\n" -# erase - send_user "retrying load\n" - doload $confghost $routername $config 1 - } elseif { $retry == 1 } { -# erase stomps ssh rsa key -# send_user "erasing nvram\n" -# erase - send_user "retrying load with tftp.\n" - doload $confghost $routername $config 0 - } else { - send_error "Error: $expect_out(0,string)\n" - logout 1 - } } - -re "\[^\n]*.*configuration is too large.*\n" { - send_error "Error: $expect_out(0,string)\n" - expect { - -re "\[^\n]*Truncate config.*:" { send "no\r" } - } - logout 1 } - -re "\[^\n]*Error (opening|copying).*\r" { - send_error "Error: $expect_out(0,string)\n" - logout 1 } - -nocase -re "\[^\n]* error\[^a-z\n]+\[^\n]*" { - send_error "$expect_out(0,string)\n" - logout 1 } - "\n" { exp_continue } - -re "^\[^ ]*\#" { - send_user "load successful.\n" - } - } - - return 0; -} - -send_user "loading $router config from $confghost\n"; - -# look for router hostname in prompt (ie: deal with fqdn) -send "\r" -expect { - timeout { - send_error "Error: did not receive prompt\n" - exit } - "\n" { exp_continue } - -re "^(\[^ ]*)\#" { - set routername $expect_out(1,string) } -} - -# deal with config subdir? from Econfgpath -if ([info exists confgpath]) { - set config "$confgpath/$routername-confg" -} else { - set config "$routername-confg" -} - -# load the config -if { [doload $confghost $routername $config 1] != 0 } { - logout 1 -} - -logout 0 - -# these were my original transcripts of performing loads. it is a useful -# example of info you may collect to get an idea of what needs to be handled -# in the expect{}s -# -# pdx-oob# -# pdx-oob#copy rcp start -# Address of remote host [255.255.255.255]? 205.238.52.35 -# Name of configuration file [a]? pdx-oob-confg -# Configure using pdx-oob-confg from 205.238.52.35? [confirm] -# -# Connected to 205.238.52.35 -# Loading 8131 byte file pdx-oob-confg: !!!! [OK] -# Compressing configuration from 8131 bytes to 3886 bytes -# [OK] -# pdx-oob# -# - -# 12.0S-isms -# pao2#cop rcp sta -# Address or name of remote host []? eng0 -# Translating "eng0"...domain server (205.238.52.46) [OK] -# -# Source username [pao2]? -# Source filename []? pao2-confg -# Destination filename [startup-config]? -# Warning: Copying this config directly into the nvram from a network server may -# cause damage the the startup config. It is advisable to copy the file -# into the running config first, and then save it using copy run start. -# Do you wish to proceed? [no]: yes -# Accessing rcp://pao2@eng0/pao2-confg... -# Connected to 205.238.52.35 -# Loading 30138 byte file pao2-confg: !!!!!! [OK] -# -# 30138 bytes copied in 2.576 secs (15069 bytes/sec) -# pao2# -# OR IS IT -# sea0#cop rcp sta -# Address or name of remote host []? eng0 -# Source username [sea0]? -# Source filename []? sea0-confg -# Destination filename [startup-config]? -# Accessing rcp://sea0@eng0/sea0-confg...!!!!!!!!!!!!!!!!!! -# 89794 bytes copied in 0.704 secs -# sea0#q -# Connection closed by foreign host. - -# pdx-oob#copy rcp start -# Address of remote host [255.255.255.255]? 205.238.52.35 -# Name of configuration file [a]? pdx-oob-confg -# Configure using pdx-oob-confg from 205.238.52.35? [confirm] -# -# Connected to 205.238.52.35 -# Loading 8131 byte file pdx-oob-confg: !!!! [OK] -# Compressing configuration from 8131 bytes to 3886 bytes -# [OK] -# pdx-oob#copy rcp start -# Address of remote host [205.238.52.35]? 205.238.52.35 -# Name of configuration file [pdx-oob-confg]? pdx-oob-confg -# Configure using pdx-oob-confg from 205.238.52.35? [confirm] -# -# Connected to 205.238.52.35 -# %rcp: /tftpboot/pdx-oob-confg: No such file or directory -# pdx-oob# -# - -# pdx-oob#copy rcp start -# Address of remote host [205.238.52.35]? 205.238.52.35 -# Name of configuration file [pdx-oob-confg]? pdx-oob-confg -# Configure using pdx-oob-confg from 205.238.52.35? [confirm] -# -# Connected to 205.238.52.35 -# %rcp: /tftpboot/pdx-oob-confg: Permission denied -# pdx-oob# -# - -# *** response from filtered pkt -# pdx-oob#copy rcp sta -# Address of remote host [205.238.52.35]? 205.238.1.94 -# Name of configuration file [pdx-oob-confg]? -# Configure using pdx-oob-confg from 205.238.1.94? [confirm] -# % Destination unreachable; gateway or host down -# -# pdx-oob# -# - -# *** response from host w/o rcp daemon -# pdx-oob#cop rcp sta -# Address of remote host [205.238.52.35]? 205.238.1.66 -# Name of configuration file [pdx-oob-confg]? -# Configure using pdx-oob-confg from 205.238.1.66? [confirm] -# % Connection refused by remote host -# -# pdx-oob# -# |