summaryrefslogtreecommitdiffstats
path: root/bin/rancid.in
diff options
context:
space:
mode:
Diffstat (limited to 'bin/rancid.in')
-rwxr-xr-xbin/rancid.in1113
1 files changed, 1113 insertions, 0 deletions
diff --git a/bin/rancid.in b/bin/rancid.in
new file mode 100755
index 0000000..d7b5fbf
--- /dev/null
+++ b/bin/rancid.in
@@ -0,0 +1,1113 @@
+#!@PERLV_PATH@
+##
+##
+## Copyright (C) 1997 by Henry Kilmer.
+## All rights reserved.
+##
+## This software may be freely copied, modified and redistributed without
+## fee for non-commerical purposes provided that this copyright notice is
+## preserved intact on all copies and modified copies.
+##
+## There is no warranty or other guarantee of fitness of this software.
+## It is provided solely "as is". The author(s) disclaim(s) all
+## responsibility and liability with respect to this software's usage
+## or its effect upon hardware, computer systems, other software, or
+## anything else.
+##
+##
+#
+# RANCID - Really Awesome New Cisco confIg Differ
+#
+# usage: rancid [-d] [-l] [-f filename | $host]
+#
+use Getopt::Std;
+getopts('dflm');
+$log = $opt_l;
+$debug = $opt_d;
+$file = $opt_f;
+$host = $ARGV[0];
+$clean_run = 0;
+$found_end = 0;
+$timeo = 90; # clogin timeout in seconds
+
+# This routine is used to print out the router configuration
+sub ProcessHistory {
+ my($new_hist_tag,$new_command,$command_string,@string)=(@_);
+ if((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
+ && defined %history) {
+ print eval "$command \%history";
+ undef %history;
+ }
+ if (($new_hist_tag) && ($new_command) && ($command_string)) {
+ if ($history{$command_string}) {
+ $history{$command_string} = "$history{$command_string}@string";
+ } else {
+ $history{$command_string} = "@string";
+ }
+ } elsif (($new_hist_tag) && ($new_command)) {
+ $history{++$#history} = "@string";
+ } else {
+ print "@string";
+ }
+ $hist_tag = $new_hist_tag;
+ $command = $new_command;
+ 1;
+}
+
+sub numerically { $a <=> $b; }
+
+# This is a sort routing that will sort numerically on the
+# keys of a hash as if it were a normal array.
+sub keynsort {
+ local(%lines)=@_;
+ local($i) = 0;
+ local(@sorted_lines);
+ foreach $key (sort numerically keys(%lines)) {
+ $sorted_lines[$i] = $lines{$key};
+ $i++;
+ }
+ @sorted_lines;
+}
+
+# This is a sort routing that will sort on the
+# keys of a hash as if it were a normal array.
+sub keysort {
+ local(%lines)=@_;
+ local($i) = 0;
+ local(@sorted_lines);
+ foreach $key (sort keys(%lines)) {
+ $sorted_lines[$i] = $lines{$key};
+ $i++;
+ }
+ @sorted_lines;
+}
+
+# This is a sort routing that will sort on the
+# values of a hash as if it were a normal array.
+sub valsort{
+ local(%lines)=@_;
+ local($i) = 0;
+ local(@sorted_lines);
+ foreach $key (sort values %lines) {
+ $sorted_lines[$i] = $key;
+ $i++;
+ }
+ @sorted_lines;
+}
+
+# This is a numerical sort routing (ascending).
+sub numsort {
+ local(%lines)=@_;
+ local($i) = 0;
+ local(@sorted_lines);
+ foreach $num (sort {$a <=> $b} keys %lines) {
+ $sorted_lines[$i] = $lines{$num};
+ $i++;
+ }
+ @sorted_lines;
+}
+
+# This is a sort routine that will sort on the
+# ip address when the ip address is anywhere in
+# the strings.
+sub ipsort {
+ local(%lines)=@_;
+ local($i) = 0;
+ local(@sorted_lines);
+ foreach $addr (sort sortbyipaddr keys %lines) {
+ $sorted_lines[$i] = $lines{$addr};
+ $i++;
+ }
+ @sorted_lines;
+}
+
+# These two routines will sort based upon IP addresses
+sub ipaddrval {
+ my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
+ $a[3]+256*($a[2]+256*($a[1]+256*$a[0]));
+}
+sub sortbyipaddr {
+ &ipaddrval($a) <=> &ipaddrval($b);
+}
+
+# This routine parses "show version"
+sub ShowVersion {
+ print STDERR " In ShowVersion: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if(/^$prompt/);
+ next if(/^(\s*|\s*$cmd\s*)$/);
+ if (/^Slave in slot (\d+) is running/) {
+ $slave = " Slave:";
+ next;
+ }
+ /^Cisco Secure PIX /i &&
+ ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
+ /^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","F1",
+ "!Image:$slave Software: $1, $2\n") && next;
+ /^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","F2",
+ "!Image:$slave $1 Synced to mainline version: $2\n") && next;
+ /^Compiled (.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","F3",
+ "!Image:$slave Compiled: $1\n") && next;
+ /^ROM: (System )?Bootstrap.*(Version.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","G1",
+ "!ROM Bootstrap: $2\n") && next;
+ if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) {
+ ProcessHistory("COMMENTS","keysort","A1",
+ "!Chassis type: $1 - a PIX\n");
+ ProcessHistory("COMMENTS","keysort","A2",
+ "!CPU: $3\n");
+ ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n");
+ }
+ /^Serial Number:\s+(.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
+ /^Activation Key:\s+(.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
+ /^ROM: \d+ Bootstrap .*(Version.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","G2",
+ "!ROM Image: Bootstrap $1\n!\n") && next;
+ /^ROM: .*(Version.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
+ /^BOOTFLASH: .*(Version.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
+ /^System image file is "([^\"]*)", booted via (\S*)/ &&
+# removed the booted source due to
+# CSCdk28131: cycling info in 'sh ver'
+# ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") &&
+ ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
+ next;
+ /^System image file is "([^\"]*)"$/ &&
+ ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
+ if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+K) bytes/) {
+ my($proc) = $1;
+ my($cpu) = $2;
+ my($mem) = $3;
+ my($device) = "router";
+ if ( $1 eq "CSC") {
+ $type = "AGS";
+ } elsif ( $1 eq "CSC4") {
+ $type = "AGS+";
+ } elsif ( $1 eq "2511" || $1 eq "2524" || $1 eq "AS2511-RJ") {
+ $type = "2500";
+ } elsif ( $1 eq "3620" || $1 eq "3640") {
+ $type = "3600";
+ } elsif ( $1 eq "RSP7000") {
+ $type = "7500";
+ } elsif ( $1 =~ /RSP\d/) {
+ $type = "7500";
+ } elsif ( $1 eq "RP1") {
+ $type = "7000";
+ } elsif ( $1 eq "RP") {
+ $type = "7000";
+ } elsif ( $1 =~ /720[246]/) {
+ $type = "7200";
+ } elsif ( $1 =~ /1200[48]\/GRP/ || $1 =~ /1201[26]\/GRP/) {
+ $type = "12000";
+ } elsif ( $1 =~ /WS-C29/) {
+ $type = "2900XL";
+ $device = "switch";
+ } else {
+ $type = $1;
+ }
+ print STDERR "TYPE = $type\n" if ($debug);
+ ProcessHistory("COMMENTS","keysort","A1",
+ "!Chassis type:$slave $proc - a $type $device\n");
+ ProcessHistory("COMMENTS","keysort","B1",
+ "!Memory:$slave main $mem\n");
+ ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n");
+ next;
+ }
+ if (/(\S+) Silicon\s*Switch Processor/) {
+ if (!defined($C0)) {
+ $C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
+ }
+ ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
+ $ssp = 1;
+ $sspmem = $1;
+ next;
+ }
+ /^(\d+K) bytes of multibus/ &&
+ ProcessHistory("COMMENTS","keysort","B2",
+ "!Memory: multibus $1\n") && next;
+ /^(\d+K) bytes of non-volatile/ &&
+ ProcessHistory("COMMENTS","keysort","B3",
+ "!Memory: nvram $1\n") && next;
+ /^(\d+K) bytes of flash memory/ &&
+ ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
+ next;
+ /^(\d+K) bytes of .*flash partition/ &&
+ ProcessHistory("COMMENTS","keysort","B6",
+ "!Memory: flash partition $1\n") && next;
+ /^(\d+K) bytes of Flash internal/ &&
+ ProcessHistory("COMMENTS","keysort","B4",
+ "!Memory: bootflash $1\n") && next;
+ if(/^(\d+K) bytes of (Flash|ATA)?.*PCMCIA .*slot ?(\d)/i) {
+ ProcessHistory("COMMENTS","keysort","B7",
+ "!Memory: pcmcia $2 slot$3 $1\n");
+ next;
+ }
+ if(/^WARNING/) {
+ if (!defined($I0)) {
+ $I0=1;
+ ProcessHistory("COMMENTS","keysort","I0","!\n");
+ }
+ ProcessHistory("COMMENTS","keysort","I1","! $_");
+ # The line after the WARNING is what to do about it.
+ $_ = <INPUT>; tr/\015//d;
+ ProcessHistory("COMMENTS","keysort","I1","! $_");
+ }
+ if (/^Configuration register is (.*)$/) {
+ $config_register=$1;
+ next;
+ }
+ }
+ return(0);
+}
+
+# This routine parses "show install active"
+sub ShowInstallActive {
+ print STDERR " In ShowInstallActive: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if /^\s*\^\s*$/;
+ return(1) if /(Invalid input detected|Type help or )/;
+ ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next;
+ }
+ return(0);
+}
+
+# This routine parses "show env all"
+sub ShowEnv {
+ # Skip if this is not a 7500, 7200, or 7000.
+ print STDERR " In ShowEnv: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^7/);
+ if (!defined($E0)) {
+ $E0=1;
+ ProcessHistory("COMMENTS","keysort","E0","!\n");
+ }
+ if (/^Arbiter type (\d), backplane type (\S+)/) {
+ if (!defined($C0)) {
+ $C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
+ }
+ ProcessHistory("COMMENTS","keysort","C1",
+ "!Enviromental Arbiter Type: $1\n");
+ ProcessHistory("COMMENTS","keysort","A2",
+ "!Chassis type: $2 backplane\n");
+ next;
+ }
+ /^\s*(Power .*)/ &&
+ ProcessHistory("COMMENTS","keysort","E1","!Power: $1\n") && next;
+ /^\s*(Lower Power .*)/i &&
+ ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
+ }
+ ProcessHistory("COMMENTS","","","!\n");
+ return(0);
+}
+
+# This routine parses "show gsr chassis-info" for the gsr
+# This will create arrarys for hw info.
+sub ShowGSR {
+ # Skip if this is not a 1200n.
+ print STDERR " In ShowGSR: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^120/);
+ /^$/ && next;
+ /^\s+Chassis: type (\S+) Fab Ver: (\S+)/ &&
+ ProcessHistory("COMMENTS","keysort","D0","!\n") &&
+ ProcessHistory("COMMENTS","keysort","D1",
+ "!GSR Chassis type: $1 Fab Ver: $2\n") &&
+ next;
+ /^\s+Chassis S\/N: (.*)$/ &&
+ ProcessHistory("COMMENTS","keysort","D2",
+ "!GSR Chassis S/N: $1\n") &&
+ next;
+ /^\s+PCA: (\S+)\s*rev: (\S+)\s*dev: \S+\s*HW ver: (\S+)$/ &&
+ ProcessHistory("COMMENTS","keysort","D3",
+ "!GSR Backplane PCA: $1, rev $2, ver $3\n") &&
+ next;
+ /^\s+Backplane S\/N: (\S+)$/ &&
+ ProcessHistory("COMMENTS","keysort","D4",
+ "!GSR Backplane S/N: $1\n") &&
+ next;
+ }
+ ProcessHistory("COMMENTS","","","!\n");
+ return(0);
+}
+
+# This routine parses "show boot"
+sub ShowBoot {
+ # Pick up boot variables if 7000/7200/7500/12000/2900;
+ # otherwise pick up bootflash.
+ print STDERR " In ShowBoot: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if /^\s*\^\s*$/;
+ return(1) if /Ambiguous command/i;
+ return(1) if /(Invalid input detected|Type help or )/;
+ return(1) if /(Open device \S+ failed|Error opening \S+:)/;
+ next if /CONFGEN variable/;
+ if (!defined($H0)) {
+ $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
+ }
+ if ($type !~ /^(120|7)/) {
+ if ($type !~ /^2900/) {
+ ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
+ } else {
+ ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
+ }
+ } elsif (/variable/) {
+ ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
+ }
+ }
+ ProcessHistory("COMMENTS","","","!\n");
+ return(0);
+}
+
+# This routine parses "show flash"
+sub ShowFlash {
+ # skip if this is 7000, 7200, 7500, or 12000.
+ print STDERR " In ShowFlash: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type =~ /^(120|7)/);
+ return(1) if /^\s*\^\s*$/;
+ return(1) if /(Invalid input detected|Type help or )/;
+ ProcessHistory("FLASH","","","!Flash: $_");
+ }
+ ProcessHistory("","","","!\n");
+ return;
+}
+
+# This routine parses "dir /all ((disk|slot)N|bootflash|nvram):"
+sub DirSlotN {
+ # Skip if this is not a 3600, 7000, 7200, 7500, or 12000.
+ print STDERR " In DirSlotN: $_" if ($debug);
+
+ my($dev) = (/\s([^\s]+):/);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^(120|7|36)/);
+ return(1) if /^\s*\^\s*$/;
+ return(1) if /(Invalid input detected|Type help or )/;
+ return(1) if /\%Error: No such file or directory/;
+ return(1) if /No space information available/;
+ return(-1) if /\%Error calling/;
+ return(-1) if /: device being squeezed/; # Flash is busy
+ return(1) if /(Open device \S+ failed|Error opening \S+:)/;
+ ProcessHistory("FLASH","","","!Flash: $dev: $_");
+ }
+ ProcessHistory("","","","!\n");
+ return(0);
+}
+
+# This routine parses "show controllers"
+sub ShowContAll {
+ # Skip if this is a 70[01]0, 7500, or 12000.
+ print STDERR " In ShowContAll: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type =~ /^(120|7[05])/);
+ if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; }
+ /^(BRI unit \d)/ &&
+ ProcessHistory("INT","","","!Interface: $1\n") && next;
+ /^LANCE unit \d, NIM/ &&
+ ProcessHistory("INT","","","!Interface: $_") && next;
+ /^(LANCE unit \d)/ &&
+ ProcessHistory("INT","","","!Interface: $1\n") && next;
+ /(Media Type is \S+),/ &&
+ ProcessHistory("INT","","","!\t$1\n");
+ if (/(M\dT:) show controller:$/) {
+ my($ctlr) = $1;
+ $_ = <INPUT>; tr/\015//d; s/ subunit \d,//;
+ ProcessHistory("INT","","","!Interface: $ctlr $_");
+ }
+ if (/^(\S+) : show controller:$/) {
+ my($ctlr) = $1;
+ $_ = <INPUT>; tr/\015//d; s/ subunit \d,//;
+ ProcessHistory("INT","","","!Interface: $ctlr: $_");
+ }
+ /^(HD unit \d), idb/ &&
+ ProcessHistory("INT","","","!Interface: $1\n") && next;
+ /^HD unit \d, NIM/ &&
+ ProcessHistory("INT","","","!Interface: $_") && next;
+ /^buffer size \d+ HD unit \d, (.*)/ &&
+ ProcessHistory("INT","","","!\t$1\n") && next;
+ /^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next;
+ /^buffer size \d+ (Universal Serial: .*)/ &&
+ ProcessHistory("INT","","","!\t$1\n") && next;
+ /^Hardware is (.*)/ &&
+ ProcessHistory("INT","","","!Interface: $INT$1\n") && next;
+ /^(QUICC Serial unit \d),/ &&
+ ProcessHistory("INT","","","!$1\n") && next;
+ /^QUICC Ethernet .*/ &&
+ ProcessHistory("INT","","","!$_") && next;
+ /^DTE .*\.$/ &&
+ ProcessHistory("INT","","","!\t$_") && next;
+ /^(cable type :.*),/ &&
+ ProcessHistory("INT","","","!\t$1\n") && next;
+ /^(.* cable.*), received clockrate \d+$/ &&
+ ProcessHistory("INT","","","!\t$1\n") && next;
+ /^.* cable.*$/ &&
+ ProcessHistory("INT","","","!\t$_") && next;
+ }
+ return(0);
+}
+
+# This routine parses "show controllers cbus"
+# Some of this is printed out in ShowDiagbus.
+sub ShowContCbus {
+ # Skip if this is not a 7000 or 7500.
+ print STDERR " In ShowContCbus: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^7[05]0/);
+ if (/^\s*slot(\d+): ([^,]+), hw (\S+), sw (\S+), ccb/) {
+ $slot = $1;
+ $board{$slot} = $2;
+ $hwver{$slot} = $3;
+ $hwucode{$slot} = $4;
+ } elsif (/^\s*(\S+) (\d+), hardware version (\S+), microcode version (\S+)/) {
+ $slot = $2;
+ $board{$slot} = $1;
+ $hwver{$slot} = $3;
+ $hwucode{$slot} = $4;
+ } elsif (/(Microcode .*)/) {
+ $ucode{$slot} = $1;
+ } elsif (/(software loaded .*)/) {
+ $ucode{$slot} = $1;
+ } elsif (/(\d+) Kbytes of main memory, (\d+) Kbytes cache memory/) {
+ $hwmemd{$slot} = $1;
+ $hwmemc{$slot} = $2;
+ } elsif (/byte buffers/) {
+ chop;
+ s/^\s*//;
+ $hwbuf{$slot} = $_;
+ } elsif (/Interface (\d+) - (\S+ \S+),/) {
+ $interface = $1;
+ ProcessHistory("HW","","",
+ "!\n!Int $interface: in slot $slot, named $2\n"); next;
+ } elsif (/(\d+) buffer RX queue threshold, (\d+) buffer TX queue limit, buffer size (\d+)/) {
+ ProcessHistory("HW","","","!Int $interface: rxq $1, txq $2, bufsize $3\n");
+ next;
+ }
+ }
+ return(0);
+}
+
+# This routine parses "show diagbus"
+# This will create arrarys for hw info.
+sub ShowDiagbus {
+ # Skip if this is not a 7000, 70[01]0, or 7500.
+ print STDERR " In ShowDiagbus: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^7[05]/);
+ if (/^\s*Slot (\d+):/i) {
+ $slot = $1;
+ next;
+ } elsif (/^\s*Slot (\d+) \(virtual\):/i) {
+ $slot = $1;
+ next;
+ } elsif (/^\s*(.*Processor.*|.*controller|.*Chassis Interface), HW rev (\S+), board revision (\S+)/i) {
+ $board = $1;
+ $hwver = $2;
+ $boardrev = $3;
+ if ($board =~ /Processor/) {
+ if ($board =~ /7000 Route\/Switch/) {
+ $board = "RSP7000";
+ } elsif ($board =~ /Route\/Switch Processor (\d)/) {
+ $board = "RSP$1";
+ } elsif ($board =~ /Route/) {
+ $board = "RP";
+ } elsif ($board =~ /Silicon Switch/) {
+ $board = "SSP";
+ } elsif ($board =~ /Switch/) {
+ $board = "SP";
+ $board = "SSP $sspmem" if $ssp;
+ } elsif ($board =~ /ATM/) {
+ $board = "AIP";
+ }
+ } elsif ($board =~ /(.*) controller/i) {
+ $board = $1;
+ }
+ # hwucode{$slot} defined in ShowContCbus
+ if (defined $hwucode{$slot}) {
+ ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev ucode $hwucode{$slot}\n");
+ } else {
+ ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev\n");
+ }
+ # These are also from the ShowContCbus
+ ProcessHistory("SLOT","","","!Slot $slot/$board: $ucode{$slot}\n") if (defined $ucode{$slot});
+ ProcessHistory("SLOT","","","!Slot $slot/$board: memd $hwmemd{$slot}, cache $hwmemc{$slot}\n")
+ if ((defined $hwmemd{$slot}) && (defined $hwmemc{$slot}));
+ ProcessHistory("SLOT","","","!Slot $slot/$board: $hwbuf{$slot}\n") if (defined $hwbuf{$slot});
+ next;
+ }
+ /Serial number: (\S+)\s*Part number: (\S+)/ &&
+ ProcessHistory("SLOT","","",
+ "!Slot $slot/$board: part $2, serial $1\n") &&
+ next;
+ /^\s*Controller Memory Size: (.*)$/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/$board: $1\n") &&
+ next;
+ if (/PA Bay (\d) Information/) {
+ $pano = $1;
+ if ("PA" =~ /$board/) {
+ ($s,$c) = split(/\//,$board);
+ $board = "$s/$c/PA $pano";
+ } else {
+ $board =~ s/\/PA \d//;
+ $board = "$board/PA $pano";
+ }
+ next;
+ }
+ /\s+(.*) PA, (\d) ports?, (\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/$board: type $3, $2 ports\n") &&
+ next;
+ /\s+(.*) PA( \(\S+\))?, (\d) ports?/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/$board: type $1$2, $3 ports\n") &&
+ next;
+ /^\s*HW rev (\S+), Board revision (\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/$board: hvers $1 rev $2\n") &&
+ next;
+ /Serial number: (\S+)\s*Part number: (\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/$board: part $2, serial $1\n") && next;
+ }
+ return(0);
+}
+
+# This routine parses "show diag" for the gsr, 7200, 3600, 2600.
+# This will create arrarys for hw info.
+sub ShowDiag {
+ # Skip if this is not a 12000.
+ print STDERR " In ShowDiag: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^(120|720|36|26)/);
+ /^$/ && next;
+ if (!defined($showdiags)) {$showdiags=1; ProcessHistory("SLOT","","","!\n");}
+ s/Port Packet Over SONET/POS/;
+ if (/^\s*SLOT\s+(\d+)\s+\((.*)\): (.*)/) {
+ $slot = $1;
+ ProcessHistory("SLOT","","","!Slot $slot: $3\n");
+ # Here we look for boards that don't have DRAM.
+ $board = "Other";
+ $board = "RP" if (/Route Processor/);
+ $board = "CLK" if (/Clock Scheduler Card/);
+ $board = "SFC" if (/Switch Fabric Card/);
+ next;
+ }
+ if (/^\s+MAIN:\s+ type \d+,\s+(.*)/) {
+ ProcessHistory("SLOT","","","!Slot $slot/MAIN: part $1\n") && next;
+ }
+ if (/^\s+PCA:\s+(.*)/) {
+ local($part) = $1;
+ $_ = <INPUT>;
+ /^\s+HW version (\S+)\s+S\/N (\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/PCA: part $part, serial $2\n") &&
+ ProcessHistory("SLOT","","","!Slot $slot/PCA: hvers $1\n");
+ next;
+ }
+ if (/^\s+MBUS: .*\)\s+(.*)/) {
+ local($tmp) = "!Slot $slot/MBUS: part $1";
+ $_ = <INPUT>;
+ /^\s+HW version (\S+)\s+S\/N (\S+)/ &&
+ ProcessHistory("SLOT","","","$tmp, serial $2\n") &&
+ ProcessHistory("SLOT","","","!Slot $slot/MBUS: hvers $1\n");
+ next;
+ }
+ if (/^\s+MBUS Agent Software version (.*)/) {
+ local($sw) = $1;
+ local($tail) = "!\n" if ($board ne "Other");
+ ProcessHistory("SLOT","","","!Slot $slot/MBUS: software $sw\n$tail");
+ next;
+ }
+ if (/^\s+DRAM size: (\d+)/) {
+ local($dram) = $1 / 1048576;
+ $_ = <INPUT>;
+ /^\s+FrFab SDRAM size: (\d+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot/MBUS: $dram Mbytes DRAM, "
+ . $1 / 1024 . " Kbytes SDRAM\n!\n");
+ next;
+ }
+ # 7200 and 3600 stuff
+ if (/^(Slot)\s+(\d+(\/\d+)?):/ || /^\s+(WIC|VIC) Slot (\d):/) {
+ if ($1 eq "WIC") {
+ $WIC = "/$2";
+ } elsif ($1 eq "VIC") {
+ $WIC = "/$2";
+ } else {
+ $slot = $2;
+ undef($WIC);
+ }
+ $_ = <INPUT>; tr/\015//d;
+
+ # clean up hideous 7200 format to look more like 7500 output
+ s/Fast-ethernet on C7200 I\/O card/FE-IO/;
+ s/ with MII or RJ45/-TX/;
+ s/Fast-ethernet /100Base/; s/[)(]//g;
+
+ /\s+(.*) port adapter,?\s+(\d+)\s+/i &&
+ ProcessHistory("SLOT","","","!Slot $slot: type $1, $2 ports\n");
+ # I/O controller with no interfaces
+ /\s+(.*)\s+port adapter\s*$/i &&
+ ProcessHistory("SLOT","","","!Slot $slot: type $1, 0 ports\n");
+ /\s+(.*)\s+daughter card(.*)$/ &&
+ ProcessHistory("SLOT","","","!Slot $slot$WIC: type $1$2\n");
+ /\s+(FT1)$/ &&
+ ProcessHistory("SLOT","","","!Slot $slot$WIC: type $1\n");
+ next;
+ }
+ /revision\s+(\S+).*revision\s+(\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot$WIC: hvers $1 rev $2\n") &&
+ next;
+ /number\s+(\S+)\s+Part number\s+(\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot $slot$WIC: part $2, serial $1\n!\n") &&
+ next;
+ }
+ return(0);
+}
+
+# This routine parses "show module".
+sub ShowModule {
+ print STDERR " In ShowModule: $_" if ($debug);
+
+ my(@lines);
+ my($slot);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ return if (/^\s*\^$/);
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+
+ # match slot info line, slot info then the rev info (the two are split)
+ if (/^ ?(\d+)\s+(\d+)\s+(.*)\s+(\S+)\s+(\S+)\s*$/) {
+ $lines[$1] .= "!Slot $1: type $3, $2 ports\n!Slot $1: part $4, serial $5\n";
+ $lines[$1] =~ s/\s+,/,/g;
+ }
+ if (/^ ?(\d+)\s+\S+\s+to\s+\S+\s+(\S+)\s+(.*)\s+(\S+)\s*$/) {
+ $lines[$1] .= "!Slot $1: hvers $2, firmware $3, sw $4\n";
+ $lines[$1] =~ s/\s+,/,/g;
+ }
+ }
+ foreach $slot (@lines) {
+ next if ($slot =~ /^\s*$/);
+ ProcessHistory("Module","","","$slot!\n");
+ }
+
+ return(0);
+}
+
+# This routine parses "show c7200" for the 7200
+# This will create arrays for hw info.
+sub ShowC7200 {
+ # Skip if this is not a 7200.
+ print STDERR " In ShowC7200: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if ($type !~ /^72/);
+ /^$/ && next;
+ if (/C7200 Midplane EEPROM:/) {
+ $_ = <INPUT>;
+ /revision\s+(\S+).*revision\s+(\S+)/;
+ ProcessHistory("SLOT","","","!Slot Midplane: hvers $1 rev $2\n");
+ $_ = <INPUT>;
+ /number\s+(\S+)\s+Part number\s+(\S+)/;
+ ProcessHistory("SLOT","","","!Slot Midplane: part $2, serial $1\n!\n");
+ next;
+ }
+ if (/C720\d(VXR)? CPU EEPROM:/) {
+ $_ = <INPUT>;
+ /revision\s+(\S+).*revision\s+(\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot CPU: hvers $1 rev $2\n");
+ $_ = <INPUT>;
+ /number\s+(\S+)\s+Part number\s+(\S+)/ &&
+ ProcessHistory("SLOT","","","!Slot CPU: part $2, serial $1\n!\n");
+ next;
+ }
+ }
+ return(0);
+}
+
+# This routine parses "show vtp status"
+sub ShowVTP {
+ print STDERR " In ShowVTP: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ next if (/^(\s*|\s*$cmd\s*)$/);
+ return(1) if /^\s*\^\s*$/;
+ return(1) if /(Invalid input detected|Type help or )/;
+ return(1) if ($type !~ /^2900XL$/);
+ next if (/^Configuration last modified by/);
+ ProcessHistory("COMMENTS","keysort","I0","!VTP: $_");
+ }
+ ProcessHistory("COMMENTS","keysort","I0","!\n");
+ return(0);
+}
+
+# This routine processes a "write term"
+sub WriteTerm {
+ print STDERR " In WriteTerm: $_" if ($debug);
+
+ while (<INPUT>) {
+ tr/\015//d;
+ last if(/^$prompt/);
+ # the pager can not be disabled per-session on the PIX
+ s/^<-+ More -+>\s*//;
+ /Non-Volatile memory is in use/ && return(-1); # NvRAM is locked
+ # skip the crap
+ if (/^(##+$|Building configuration...)/i) {
+ while (<INPUT>) {
+ next if (/^Current configuration\s*:/i);
+ next if (/^:/);
+ next if (/^([%!].*|\s*)$/);
+ next if (/^ip add.*ipv4:/); # band-aid for 3620 12.0S
+ last;
+ }
+ if (defined($config_register)) {
+ ProcessHistory("","","","!\nconfig-register $config_register\n");
+ }
+ tr/\015//d;
+ }
+ # some versions have other crap mixed in with the bits in the
+ # block above
+ /^! (Last configuration|NVRAM config last)/ && next;
+
+ # Dog gone Cool matches to process the rest of the config
+ /^tftp-server flash / && next; # kill any tftp remains
+ /^ntp clock-period / && next; # kill ntp clock-period
+ /^ length / && next; # kill length on serial lines
+ /^ width / && next; # kill width on serial lines
+ /^ clockrate / && next; # kill clockrate on serial interfaces
+ /^(enable )?(password|passwd) / &&
+ ProcessHistory("ENABLE","","","!$1$2 <removed>\n") &&
+ next;
+ /^username (\S+) password /&&
+ ProcessHistory("USER","keysort","$1","!username $1 password <removed>\n") && next;
+ /^\s*password / &&
+ ProcessHistory("LINE-PASS","","","! password <removed>\n") && next;
+ /^\s*neighbor (\S*) password / &&
+ ProcessHistory("","","","! neighbor $1 password <removed>\n") &&
+ next;
+ /^(ip ftp password) / &&
+ ProcessHistory("","","","!$1 <removed>\n") && next;
+ /^( ip ospf authentication-key) / &&
+ ProcessHistory("","","","!$1 <removed>\n") && next;
+ /^( ip ospf message-digest-key \d+ md5) / &&
+ ProcessHistory("","","","!$1 <removed>\n") && next;
+ /fair-queue individual-limit/ && next;
+ # sort ip explicit-paths.
+ if (/^ip explicit-path name (\S+)/) {
+ my($key) = $1;
+ my($expath) = $_;
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/);
+ last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
+ if (/^ip explicit-path name (\S+)/) {
+ ProcessHistory("EXPATH","keysort","$key","$expath");
+ $key = $1;
+ $expath = $_;
+ } else {
+ $expath .= $_;
+ }
+ }
+ ProcessHistory("EXPATH","keysort","$key","$expath");
+ }
+ # sort route-maps
+ if (/^route-map (\S+)/) {
+ my($key) = $1;
+ my($routemap) = $_;
+ while (<INPUT>) {
+ tr/\015//d;
+ last if (/^$prompt/ || ! /^(route-map |[ !])/);
+ if (/^route-map (\S+)/) {
+ ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
+ $key = $1;
+ $routemap = $_;
+ } else {
+ $routemap .= $_;
+ }
+ }
+ ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
+ }
+ # filter out any RCS/CVS tags to avoid confusing local CVS storage
+ s/\$(Revision|Id):/ $1:/;
+ # order access-lists
+ /^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
+ ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
+ # order extended access-lists
+ /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
+ ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
+ /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
+ ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
+ /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
+ ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;
+ # order arp lists
+ /^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
+ ProcessHistory("ARP","ipsort","$1","$_") && next;
+ /^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
+ ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
+ && next;
+ # order logging statements
+ /^logging (\d+\.\d+\.\d+\.\d+)/ &&
+ ProcessHistory("LOGGING","ipsort","$1","$_") && next;
+ # order name-server statements
+ /^ip name-server (\d+\.\d+\.\d+\.\d+)/ &&
+ ProcessHistory("NAMESERVER","ipsort","$1","$_") && next;
+ # order/prune snmp-server host statements
+ # we only prune lines of the form
+ # snmp-server host a.b.c.d <community>
+ if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
+ if (defined($ENV{'NOCOMMSTR'})) {
+ my($ip) = $1;
+ my($line) = "snmp-server host $ip";
+ my(@tokens) = split(' ', $');
+ my($token);
+ while ($token = shift(@tokens)) {
+ if ($token eq 'version') {
+ $line .= " " . join(' ', ($token, shift(@tokens)));
+ } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
+ $line .= " " . $token;
+ } else {
+ $line = "!$line " . join(' ', ("<removed>", join(' ',@tokens)));
+ last;
+ }
+ }
+ ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
+ } else {
+ ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
+ }
+ next;
+ }
+ if (/^(snmp-server community) (\S+)/) {
+ if (defined($ENV{'NOCOMMSTR'})) {
+ ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 <removed>$'") && next;
+ } else {
+ ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
+ }
+ }
+ # order/prune tacacs/radius server statements
+ /^(tacacs-server|radius-server) key / &&
+ ProcessHistory("","","","!$1 key <removed>\n") && next;
+ # order clns host statements
+ /^clns host \S+ (\S+)/ &&
+ ProcessHistory("CLNS","keysort","$1","$_") && next;
+ # order alias statements
+ /^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
+ # delete ntp auth password
+ /^(ntp authentication-key \d+ md5) / &&
+ ProcessHistory("","","","!$1 <removed>\n") && next;
+ # order ntp peers/servers
+ if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
+ $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
+ ProcessHistory("NTP","keysort",$sortkey,"$_");
+ next;
+ }
+ # order ip host line statements
+ /^ip host line(\d+)/ &&
+ ProcessHistory("IPHOST","numsort","$1","$_") && next;
+ # order ip nat source static statements
+ /^ip nat (\S+) source static (\S+)/ &&
+ ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
+ # order atm map-list statements
+ /^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
+ ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
+ # order ip rcmd lines
+ /^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;
+
+ # system controller
+ /^syscon address (\S*) (\S*)/ &&
+ ProcessHistory("","","","!syscon address $1 <removed>\n") &&
+ next;
+ /^syscon password (\S*)/ &&
+ ProcessHistory("","","","!syscon password <removed>\n") &&
+ next;
+
+ # catch anything that wasnt match above.
+ ProcessHistory("","","","$_");
+ # end of config
+ #if (/^end(\n\[OK])?$/) {
+ if (/^(: )?end$/) {
+ $found_end = 1;
+ return(1);
+ }
+ }
+ return(0);
+}
+
+# dummy function
+sub DoNothing {print STDOUT;}
+
+# Main
+%commands=(
+ 'show version' => "ShowVersion",
+ 'show install active' => "ShowInstallActive",
+ 'show env all' => "ShowEnv",
+ 'show gsr chassis' => "ShowGSR",
+ 'show boot' => "ShowBoot",
+ 'show bootvar' => "ShowBoot",
+ 'show flash' => "ShowFlash",
+ 'dir /all nvram:' => "DirSlotN",
+ 'dir /all bootflash:' => "DirSlotN",
+ 'dir /all slot0:' => "DirSlotN",
+ 'dir /all disk0:' => "DirSlotN",
+ 'dir /all slot1:' => "DirSlotN",
+ 'dir /all disk1:' => "DirSlotN",
+ 'show controllers' => "ShowContAll",
+ 'show controllers cbus' => "ShowContCbus",
+ 'show diagbus' => "ShowDiagbus",
+ 'show diag' => "ShowDiag",
+ 'show module' => "ShowModule", # cat 6500-ios
+ 'show c7200' => "ShowC7200",
+ 'show vtp status' => "ShowVTP",
+ 'write term' => "WriteTerm"
+);
+# keys() doesnt return things in the order entered and the order of the
+# cmds is important (show version first and write term last). pita
+@commands=(
+ "show version",
+ "show install active",
+ "show env all",
+ "show gsr chassis",
+ "show boot",
+ "show bootvar",
+ "show flash",
+ "dir /all nvram:",
+ "dir /all bootflash:",
+ "dir /all slot0:",
+ "dir /all disk0:",
+ "dir /all slot1:",
+ "dir /all disk1:",
+ "show controllers",
+ "show controllers cbus",
+ "show diagbus",
+ "show diag",
+ "show module",
+ "show c7200",
+ "show vtp status",
+ "write term"
+);
+$cisco_cmds=join(";",@commands);
+$cmds_regexp=join("|",@commands);
+
+open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
+select(OUTPUT);
+# make OUTPUT unbuffered if debugging
+if ($debug) { $| = 1; }
+
+if ($file) {
+ print STDERR "opening file $host\n" if ($debug);
+ print STDOUT "opening file $host\n" if ($log);
+ open(INPUT,"<$host") || die "open failed for $host: $!\n";
+} else {
+ print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
+ print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
+ if (defined($ENV{NOPIPE})) {
+ system "clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "clogin failed for $host: $!\n";
+ open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
+ } else {
+ open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "clogin failed for $host: $!\n";
+ }
+}
+
+ProcessHistory("COMMENTS","keysort","B0","!\n");
+ProcessHistory("COMMENTS","keysort","F0","!\n");
+ProcessHistory("COMMENTS","keysort","G0","!\n");
+TOP: while(<INPUT>) {
+ tr/\015//d;
+ if (/\#\s?exit$/) {
+ $clean_run=1;
+ last;
+ }
+ if (/Error:/) {
+ s/^.*Error:/Error:/;
+ print STDOUT ("$host clogin error: $_");
+ print STDERR ("$host clogin error: $_") if ($debug);
+ $clean_run=0;
+ last;
+ }
+ while (/#\s*($cmds_regexp)\s*$/) {
+ $cmd = $1;
+ if (!defined($prompt)) {$prompt = ($_ =~ /^([^#]+#)/)[0]; }
+ print STDERR ("HIT COMMAND:$_") if ($debug);
+ if (! defined($commands{$cmd})) {
+ print STDERR "found unexpected command - \"$cmd\"\n";
+ $clean_run = 0;
+ last TOP;
+ }
+ $rval = &{$commands{$cmd}};
+ delete($commands{$cmd});
+ if ($rval == -1) {
+ $clean_run = 0;
+ last TOP;
+ }
+ }
+}
+print STDOUT "Done $logincmd: $_\n" if ($log);
+# Flush History
+ProcessHistory("","","","");
+# Cleanup
+close(INPUT);
+close(OUTPUT);
+
+if (defined($ENV{NOPIPE})) {
+ unlink("$host.raw") if (! $debug);
+}
+
+# check for completeness
+if (scalar(%commands) || !$clean_run || !$found_end) {
+ if (scalar(%commands)) {
+ printf(STDOUT "missed cmd(s): %s\n", join(',', keys(%commands)));
+ printf(STDERR "missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
+ }
+ if (!$clean_run || !$found_end) {
+ print STDOUT "End of run not found\n";
+ print STDERR "End of run not found\n" if ($debug);
+ system("/usr/bin/tail -1 $host.new");
+ }
+ unlink "$host.new" if (! $debug);
+}
generated by cgit (git 2.34.1) at 2024-04-24 16:54:43 +0000