diff options
Diffstat (limited to 'bin/f10rancid.in')
-rwxr-xr-x | bin/f10rancid.in | 1255 |
1 files changed, 1255 insertions, 0 deletions
diff --git a/bin/f10rancid.in b/bin/f10rancid.in new file mode 100755 index 0000000..54ccd74 --- /dev/null +++ b/bin/f10rancid.in @@ -0,0 +1,1255 @@ +#!@PERLV_PATH@ +## +## This version of rancid tries to deal with Force10s. +## +## Copyright (C) 1997-2001 by Henry Kilmer. +## All rights reserved. +## +## This software may be freely copied, modified and redistributed without +## fee for non-commerical purposes provided that this copyright notice is +## preserved intact on all copies and modified copies. +## +## There is no warranty or other guarantee of fitness of this software. +## It is provided solely "as is". The author(s) disclaim(s) all +## responsibility and liability with respect to this software's usage +## or its effect upon hardware, computer systems, other software, or +## anything else. +## +## +# +# RANCID - Really Awesome New Cisco confIg Differ +# +# usage: rancid [-d] [-l] [-f filename | $host] +# +use Getopt::Std; +getopts('dflm'); +$log = $opt_l; +$debug = $opt_d; +$file = $opt_f; +$host = $ARGV[0]; +$clean_run = 0; +$found_end = 0; +$timeo = 90; # clogin timeout in seconds + +my(%filter_pwds); # password filtering mode + +# This routine is used to print out the router configuration +sub ProcessHistory { + my($new_hist_tag,$new_command,$command_string,@string)=(@_); + if((($new_hist_tag ne $hist_tag) || ($new_command ne $command)) + && defined %history) { + print eval "$command \%history"; + undef %history; + } + if (($new_hist_tag) && ($new_command) && ($command_string)) { + if ($history{$command_string}) { + $history{$command_string} = "$history{$command_string}@string"; + } else { + $history{$command_string} = "@string"; + } + } elsif (($new_hist_tag) && ($new_command)) { + $history{++$#history} = "@string"; + } else { + print "@string"; + } + $hist_tag = $new_hist_tag; + $command = $new_command; + 1; +} + +sub numerically { $a <=> $b; } + +# This is a sort routing that will sort numerically on the +# keys of a hash as if it were a normal array. +sub keynsort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $key (sort numerically keys(%lines)) { + $sorted_lines[$i] = $lines{$key}; + $i++; + } + @sorted_lines; +} + +# This is a sort routing that will sort on the +# keys of a hash as if it were a normal array. +sub keysort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $key (sort keys(%lines)) { + $sorted_lines[$i] = $lines{$key}; + $i++; + } + @sorted_lines; +} + +# This is a sort routing that will sort on the +# values of a hash as if it were a normal array. +sub valsort{ + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $key (sort values %lines) { + $sorted_lines[$i] = $key; + $i++; + } + @sorted_lines; +} + +# This is a numerical sort routing (ascending). +sub numsort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $num (sort {$a <=> $b} keys %lines) { + $sorted_lines[$i] = $lines{$num}; + $i++; + } + @sorted_lines; +} + +# This is a sort routine that will sort on the +# ip address when the ip address is anywhere in +# the strings. +sub ipsort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $addr (sort sortbyipaddr keys %lines) { + $sorted_lines[$i] = $lines{$addr}; + $i++; + } + @sorted_lines; +} + +# These two routines will sort based upon IP addresses +sub ipaddrval { + my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#); + $a[3]+256*($a[2]+256*($a[1]+256*$a[0])); +} +sub sortbyipaddr { + &ipaddrval($a) <=> &ipaddrval($b); +} + +# This routine parses "show version" +sub ShowVersion { + print STDERR " In ShowVersion: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + study; + last if(/^$prompt/); + next if(/^(\s*|\s*$cmd\s*)$/); + return(-1) if (/command authorization failed/i); + if (/^Slave in slot (\d+) is running/) { + $slave = " Slave:"; + next; + } + /^Cisco Secure PIX /i && + ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next; + /^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ && + ProcessHistory("COMMENTS","keysort","F1", + "!Image:$slave Software: $1, $2\n") && next; + /^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ && + ProcessHistory("COMMENTS","keysort","F2", + "!Image:$slave $1 Synced to mainline version: $2\n") && next; + /^Compiled (.*)$/ && + ProcessHistory("COMMENTS","keysort","F3", + "!Image:$slave Compiled: $1\n") && next; + /^ROM: (System )?Bootstrap.*(Version.*)$/ && + ProcessHistory("COMMENTS","keysort","G1", + "!ROM Bootstrap: $2\n") && next; + if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) { + ProcessHistory("COMMENTS","keysort","A1", + "!Chassis type: $1 - a PIX\n"); + ProcessHistory("COMMENTS","keysort","A2", + "!CPU: $3\n"); + ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n"); + } + /^Serial Number:\s+(.*)$/ && + ProcessHistory("COMMENTS","keysort","C1", "!$_") && next; + /^Activation Key:\s+(.*)$/ && + ProcessHistory("COMMENTS","keysort","C2", "!$_") && next; + /^ROM: \d+ Bootstrap .*(Version.*)$/ && + ProcessHistory("COMMENTS","keysort","G2", + "!ROM Image: Bootstrap $1\n!\n") && next; + /^ROM: .*(Version.*)$/ && + ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next; + /^BOOTFLASH: .*(Version.*)$/ && + ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next; + /^BOOTLDR: .*(Version.*)$/ && + ProcessHistory("COMMENTS","keysort","G4","!BOOTLDR: $1\n") && next; + /^.* Version.*$/ && + ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next; + /^Build .*$/ && + ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next; + /^System image file is "([^\"]*)", booted via (\S*)/ && +# removed the booted source due to +# CSCdk28131: cycling info in 'sh ver' +# ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") && + ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") && + next; + /^System image file is "([^\"]*)"$/ && + ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next; + if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+[kK]) bytes/) { + my($proc) = $1; + my($cpu) = $2; + my($mem) = $3; + my($device) = "router"; + if ( $1 eq "CSC") { + $type = "AGS"; + } elsif ( $1 eq "CSC4") { + $type = "AGS+"; + } elsif ( $1 eq "2511" || $1 eq "2524" || $1 eq "AS2511-RJ") { + $type = "2500"; + } elsif ( $1 =~ /261[01]/ || $1 =~ /262[01]/ ) { + $type = "2600"; + } elsif ( $1 eq "3620" || $1 eq "3640") { + $type = "3600"; + } elsif ( $1 eq "RSP7000") { + $type = "7500"; + } elsif ( $1 =~ /RSP\d/) { + $type = "7500"; + } elsif ( $1 eq "RP1") { + $type = "7000"; + } elsif ( $1 eq "RP") { + $type = "7000"; + } elsif ( $1 =~ /720[246]/) { + $type = "7200"; + } elsif ( $1 =~ /1200[48]\/GRP/ || $1 =~ /1201[26]\/GRP/) { + $type = "12000"; + } elsif ( $1 =~ /1201[26]-8R\/GRP/) { + $type = "12000"; + } elsif ( $1 =~ /WS-C29/) { + $type = "2900XL"; + $device = "switch"; + } elsif ( $1 =~ /WS-C35/) { + $type = "3500XL"; + $device = "switch"; + } elsif ( $1 =~ /6000/) { + $type = "6000"; + $device = "switch"; + } else { + $type = $1; + } + print STDERR "TYPE = $type\n" if ($debug); + ProcessHistory("COMMENTS","keysort","A1", + "!Chassis type:$slave $proc - a $type $device\n"); + ProcessHistory("COMMENTS","keysort","B1", + "!Memory:$slave main $mem\n"); + ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n"); + next; + } + if (/^(.*)\s+processor .*with (\d+[kK]?) bytes/) { + my($cpu) = $1; + my($mem) = $2; + my($type) = "Buffy"; + my($device) = "Force10"; + ProcessHistory("COMMENTS","keysort","A1", + "!Chassis type:$slave - a $device $type\n"); + ProcessHistory("COMMENTS","keysort","B1", + "!Memory:$slave main $mem\n"); + ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n"); + next; + } + /^(\S+)\s+processor: part number (\S+), mask (\S+)/ && + ProcessHistory("COMMENTS","keysort","A4","!CPU:$slave $_") && next; + if (/(\S+) Silicon\s*Switch Processor/) { + if (!defined($C0)) { + $C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n"); + } + ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n"); + $ssp = 1; + $sspmem = $1; + next; + } + /^(\d+[kK]) bytes of multibus/ && + ProcessHistory("COMMENTS","keysort","B2", + "!Memory: multibus $1\n") && next; + /^(\d+[kK]) bytes of non-volatile/ && + ProcessHistory("COMMENTS","keysort","B3", + "!Memory: nvram $1\n") && next; + /^(\d+[kK]) bytes of flash memory/ && + ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") && + next; + /^(\d+[kK]) bytes of .*flash partition/ && + ProcessHistory("COMMENTS","keysort","B6", + "!Memory: flash partition $1\n") && next; + /^(\d+[kK]) bytes of Flash internal/ && + ProcessHistory("COMMENTS","keysort","B4", + "!Memory: bootflash $1\n") && next; + if(/^(\d+[kK]) bytes of (Flash|ATA)?.*PCMCIA .*(slot|disk) ?(\d)/i) { + ProcessHistory("COMMENTS","keysort","B7", + "!Memory: pcmcia $2 $3$4 $1\n"); + next; + } + if(/^WARNING/) { + if (!defined($I0)) { + $I0=1; + ProcessHistory("COMMENTS","keysort","I0","!\n"); + } + ProcessHistory("COMMENTS","keysort","I1","! $_"); + # The line after the WARNING is what to do about it. + $_ = <INPUT>; tr/\015//d; + ProcessHistory("COMMENTS","keysort","I1","! $_"); + } + if (/^Configuration register is (.*)$/) { + $config_register=$1; + next; + } + } + return(0); +} + +# This routine parses "show install active" +sub ShowInstallActive { + print STDERR " In ShowInstallActive: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(1) if /^\s*\^\s*$/; + return(1) if /(Invalid input detected|Type help or )/; + return(-1) if (/command authorization failed/i); + ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next; + } + return(0); +} + +# This routine parses "show env all" +sub ShowEnv { + # Skip if this is not a 7500, 7200, or 7000. + print STDERR " In ShowEnv: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + #return(1) if ($type !~ /^7/); + return(-1) if (/command authorization failed/i); + if (!defined($E0)) { + $E0=1; + ProcessHistory("COMMENTS","keysort","E0","!\n"); + } + if (/^Arbiter type (\d), backplane type (\S+)/) { + if (!defined($C0)) { + $C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n"); + } + ProcessHistory("COMMENTS","keysort","C1", + "!Enviromental Arbiter Type: $1\n"); + ProcessHistory("COMMENTS","keysort","A2", + "!Chassis type: $2 backplane\n"); + next; + } + /^\s*(Power [^:\n]+)$/ && + ProcessHistory("COMMENTS","keysort","E1","!Power: $1\n") && next; + /^\s*(Lower Power .*)/i && + ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next; + /^\s*(redundant .*)/i && + ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next; + } + ProcessHistory("COMMENTS","","","!\n"); + return(0); +} + +# This routine parses "show gsr chassis-info" for the gsr +# This will create arrays for hw info. +sub ShowGSR { + # Skip if this is not a 1200n. + print STDERR " In ShowGSR: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(-1) if (/command authorization failed/i); + # return(1) if ($type !~ /^12[40]/); + /^$/ && next; + /^\s+Chassis: type (\S+) Fab Ver: (\S+)/ && + ProcessHistory("COMMENTS","keysort","D0","!\n") && + ProcessHistory("COMMENTS","keysort","D1", + "!GSR Chassis type: $1 Fab Ver: $2\n") && + next; + /^\s+Chassis S\/N: (.*)$/ && + ProcessHistory("COMMENTS","keysort","D2", + "!GSR Chassis S/N: $1\n") && + next; + /^\s+PCA: (\S+)\s*rev: (\S+)\s*dev: \S+\s*HW ver: (\S+)$/ && + ProcessHistory("COMMENTS","keysort","D3", + "!GSR Backplane PCA: $1, rev $2, ver $3\n") && + next; + /^\s+Backplane S\/N: (\S+)$/ && + ProcessHistory("COMMENTS","keysort","D4", + "!GSR Backplane S/N: $1\n") && + next; + } + ProcessHistory("COMMENTS","","","!\n"); + return(0); +} + +# This routine parses "show boot" +sub ShowBoot { + # Pick up boot variables if 7000/7200/7500/12000/2900/3500; + # otherwise pick up bootflash. + print STDERR " In ShowBoot: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(1) if /^\s*\^\s*$/; + return(-1) if (/command authorization failed/i); + return(1) if /Ambiguous command/i; + return(1) if /(Invalid input detected|Type help or )/; + return(1) if /(Open device \S+ failed|Error opening \S+:)/; + next if /CONFGEN variable/; + if (!defined($H0)) { + $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n"); + } + if ($type !~ /^(12[04]|7)/) { + if ($type !~ /^(29|35)00/) { + ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_"); + } else { + ProcessHistory("COMMENTS","keysort","H1","!Variable: $_"); + } + } elsif (/variable/) { + ProcessHistory("COMMENTS","keysort","H1","!Variable: $_"); + } + } + ProcessHistory("COMMENTS","","","!\n"); + return(0); +} + +# This routine parses "show flash" +sub ShowFlash { + # skip if this is 7000, 7200, 7500, or 12000; else we end up with + # redundant data from dir /all slot0: + print STDERR " In ShowFlash: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(1) if ($type =~ /^(12[40]|7)/); + return(-1) if (/command authorization failed/i); + return(1) if /^\s*\^\s*$/; + return(1) if /(Invalid input detected|Type help or )/; + ProcessHistory("FLASH","","","!Flash: $_"); + } + ProcessHistory("","","","!\n"); + return; +} + +# This routine parses "dir /all ((disk|slot)N|bootflash|nvram):" +sub DirSlotN { + # Skip if this is not a 3600, 7000, 7200, 7500, or 12000. + print STDERR " In DirSlotN: $_" if ($debug); + + my($dev) = (/\s([^\s]+):/); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + # return(1) if ($type !~ /^(12[40]|7|36)/); + return(1) if /^\s*\^\s*$/; + return(1) if /(Invalid input detected|Type help or )/; + return(1) if /No such device/i; + return(1) if /\%Error: No such file or directory/; + return(1) if /No space information available/; + return(-1) if /\%Error calling/; + return(-1) if /(: device being squeezed|ATA_Status time out)/i; # busy + return(-1) if (/command authorization failed/i); + return(1) if /(Open device \S+ failed|Error opening \S+:)/; + ProcessHistory("FLASH","","","!Flash: $dev: $_"); + } + ProcessHistory("","","","!\n"); + return(0); +} + +# This routine parses "show controllers" +sub ShowContAll { + # Skip if this is a 70[01]0, 7500, or 12000. + print STDERR " In ShowContAll: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + study; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + # return(1) if ($type =~ /^(12[40]|7[05])/); + return(-1) if (/command authorization failed/i); + if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; } + /^(BRI unit \d)/ && + ProcessHistory("INT","","","!Interface: $1\n") && next; + /^LANCE unit \d, NIM/ && + ProcessHistory("INT","","","!Interface: $_") && next; + /^(LANCE unit \d)/ && + ProcessHistory("INT","","","!Interface: $1\n") && next; + /(Media Type is \S+),/ && + ProcessHistory("INT","","","!\t$1\n"); + if (/(M\dT[^ :]*:) show controller:$/) { + my($ctlr) = $1; + $_ = <INPUT>; tr/\015//d; s/ subunit \d,//; + ProcessHistory("INT","","","!Interface: $ctlr $_"); + } + if (/^(\S+) : show controller:$/) { + my($ctlr) = $1; + $_ = <INPUT>; tr/\015//d; s/ subunit \d,//; + ProcessHistory("INT","","","!Interface: $ctlr: $_"); + } + /^(HD unit \d), idb/ && + ProcessHistory("INT","","","!Interface: $1\n") && next; + /^HD unit \d, NIM/ && + ProcessHistory("INT","","","!Interface: $_") && next; + /^buffer size \d+ HD unit \d, (.*)/ && + ProcessHistory("INT","","","!\t$1\n") && next; + /^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next; + /^buffer size \d+ (Universal Serial: .*)/ && + ProcessHistory("INT","","","!\t$1\n") && next; + /^Hardware is (.*)/ && + ProcessHistory("INT","","","!Interface: $INT$1\n") && next; + /^(QUICC Serial unit \d),/ && + ProcessHistory("INT","","","!$1\n") && next; + /^QUICC Ethernet .*/ && + ProcessHistory("INT","","","!$_") && next; + /^DTE .*\.$/ && + ProcessHistory("INT","","","!\t$_") && next; + /^(cable type :.*),/ && + ProcessHistory("INT","","","!\t$1\n") && next; + /^(.* cable.*), received clockrate \d+$/ && + ProcessHistory("INT","","","!\t$1\n") && next; + /^.* cable.*$/ && + ProcessHistory("INT","","","!\t$_") && next; + } + return(0); +} + +# This routine parses "show controllers cbus" +# Some of this is printed out in ShowDiagbus. +sub ShowContCbus { + # Skip if this is not a 7000 or 7500. + print STDERR " In ShowContCbus: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + #return(1) if ($type !~ /^7[05]0/); + return(-1) if (/command authorization failed/i); + if (/^\s*slot(\d+): ([^,]+), hw (\S+), sw (\S+), ccb/) { + $slot = $1; + $board{$slot} = $2; + $hwver{$slot} = $3; + $hwucode{$slot} = $4; + } elsif (/^\s*(\S+) (\d+), hardware version (\S+), microcode version (\S+)/) { + $slot = $2; + $board{$slot} = $1; + $hwver{$slot} = $3; + $hwucode{$slot} = $4; + } elsif (/(Microcode .*)/) { + $ucode{$slot} = $1; + } elsif (/(software loaded .*)/) { + $ucode{$slot} = $1; + } elsif (/(\d+) Kbytes of main memory, (\d+) Kbytes cache memory/) { + $hwmemd{$slot} = $1; + $hwmemc{$slot} = $2; + } elsif (/byte buffers/) { + chop; + s/^\s*//; + $hwbuf{$slot} = $_; + } elsif (/Interface (\d+) - (\S+ \S+),/) { + $interface = $1; + ProcessHistory("HW","","", + "!\n!Int $interface: in slot $slot, named $2\n"); next; + } elsif (/(\d+) buffer RX queue threshold, (\d+) buffer TX queue limit, buffer size (\d+)/) { + ProcessHistory("HW","","","!Int $interface: rxq $1, txq $2, bufsize $3\n"); + next; + } + } + return(0); +} + +# This routine parses "show diagbus" +# This will create arrarys for hw info. +sub ShowDiagbus { + # Skip if this is not a 7000, 70[01]0, or 7500. + print STDERR " In ShowDiagbus: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + study; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + #return(1) if ($type !~ /^7[05]/); + return(-1) if (/command authorization failed/i); + if (/^\s*Slot (\d+):/i) { + $slot = $1; + next; + } elsif (/^\s*Slot (\d+) \(virtual\):/i) { + $slot = $1; + next; + } elsif (/^\s*(.*Processor.*|.*controller|.*Chassis Interface)(, FRU:.*)?, HW rev (\S+), board revision (\S+)/i) { + $board = $1; + $hwver = $3; + $boardrev = $4; + if ($board =~ /Processor/) { + if ($board =~ /7000 Route\/Switch/) { + $board = "RSP7000"; + } elsif ($board =~ /Route\/Switch Processor (\d)/) { + $board = "RSP$1"; + } elsif ($board =~ /Route/) { + $board = "RP"; + } elsif ($board =~ /Silicon Switch/) { + $board = "SSP"; + } elsif ($board =~ /Switch/) { + $board = "SP"; + $board = "SSP $sspmem" if $ssp; + } elsif ($board =~ /ATM/) { + $board = "AIP"; + } + } elsif ($board =~ /(.*) controller/i) { + $board = $1; + } + # hwucode{$slot} defined in ShowContCbus + if (defined $hwucode{$slot}) { + ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev ucode $hwucode{$slot}\n"); + } else { + ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev\n"); + } + # These are also from the ShowContCbus + ProcessHistory("SLOT","","","!Slot $slot/$board: $ucode{$slot}\n") if (defined $ucode{$slot}); + ProcessHistory("SLOT","","","!Slot $slot/$board: memd $hwmemd{$slot}, cache $hwmemc{$slot}\n") + if ((defined $hwmemd{$slot}) && (defined $hwmemc{$slot})); + ProcessHistory("SLOT","","","!Slot $slot/$board: $hwbuf{$slot}\n") if (defined $hwbuf{$slot}); + next; + } + /Serial number: (\S+)\s*Part number: (\S+)/ && + ProcessHistory("SLOT","","", + "!Slot $slot/$board: part $2, serial $1\n") && + next; + /^\s*Controller Memory Size: (.*)$/ && + ProcessHistory("SLOT","","","!Slot $slot/$board: $1\n") && + next; + if (/PA Bay (\d) Information/) { + $pano = $1; + if ("PA" =~ /$board/) { + ($s,$c) = split(/\//,$board); + $board = "$s/$c/PA $pano"; + } else { + $board =~ s/\/PA \d//; + $board = "$board/PA $pano"; + } + next; + } + /\s+(.*) (IP|PA), (\d) ports?,( \S+,)? (FRU: )?(\S+)/ && + ProcessHistory("SLOT","","","!Slot $slot/$board: type $6, $3 ports\n") && + next; + /\s+(.*) (IP|PA)( \(\S+\))?, (\d) ports?/ && + ProcessHistory("SLOT","","","!Slot $slot/$board: type $1$3, $4 ports\n") && + next; + /^\s*HW rev (\S+), Board revision (\S+)/ && + ProcessHistory("SLOT","","","!Slot $slot/$board: hvers $1 rev $2\n") && + next; + /Serial number: (\S+)\s*Part number: (\S+)/ && + ProcessHistory("SLOT","","","!Slot $slot/$board: part $2, serial $1\n") && next; + } + return(0); +} + +# This routine parses "show diag" for the gsr, 7200, 3600, 2600. +# This will create arrarys for hw info. +sub ShowDiag { + # Skip if this is not a 12000. + print STDERR " In ShowDiag: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + study; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + # return(1) if ($type !~ /^(12[40]|720|36|26)/); + return(-1) if (/command authorization failed/i); + /^$/ && next; + s/Port Packet Over SONET/POS/; + if (/^\s*SLOT\s+(\d+)\s+\((.*)\): (.*)/) { + $slot = $1; + ProcessHistory("SLOT","","","!\n!Slot $slot: $3\n"); + next; + } + if (/^\s+MAIN:\s* type \d+,\s+(.*)/) { + ProcessHistory("SLOT","","","!Slot $slot/MAIN: part $1\n") && next; + } + if (/ Engine:\s+(.*)/) { + ProcessHistory("SLOT","","","!Slot $slot/Engine: $1\n"); + } + if (/^\s+PCA:\s+(.*)/) { + local($part) = $1; + $_ = <INPUT>; + /^\s+HW version (\S+)\s+S\/N (\S+)/ && + ProcessHistory("SLOT","","","!Slot $slot/PCA: part $part, serial $2\n") && + ProcessHistory("SLOT","","","!Slot $slot/PCA: hvers $1\n"); + next; + } + if (/^\s+MBUS: .*\)\s+(.*)/) { + local($tmp) = "!Slot $slot/MBUS: part $1"; + $_ = <INPUT>; + /^\s+HW version (\S+)\s+S\/N (\S+)/ && + ProcessHistory("SLOT","","","$tmp, serial $2\n") && + ProcessHistory("SLOT","","","!Slot $slot/MBUS: hvers $1\n"); + next; + } + if (/^\s+MBUS Agent Software version (.*)/) { + ProcessHistory("SLOT","","","!Slot $slot/MBUS: software $1\n"); + next; + } + if (/^\s+ROM Monitor version (.*)/) { + ProcessHistory("SLOT","","","!Slot $slot/ROM Monitor: version $1\n"); + next; + } + if (/^\s+Fabric Downloader version used (.*)/) { + ProcessHistory("SLOT","","","!Slot $slot/Fabric Downloader: version $1\n"); + next; + } + if (/^\s+DRAM size: (\d+)/) { + local($dram) = $1 / 1048576; + $_ = <INPUT>; + if (/^\s+FrFab SDRAM size: (\d+)/) { + ProcessHistory("SLOT","","","!Slot $slot/MBUS: $dram Mbytes DRAM, " + . $1 / 1024 . " Kbytes SDRAM\n"); + } else { + ProcessHistory("SLOT","","","!Slot $slot/MBUS: $dram Mbytes DRAM\n"); + } + next; + } + # 7200 and 3600 stuff + if (/^(Slot)\s+(\d+(\/\d+)?):/ || /^\s+(WIC|VIC) Slot (\d):/) { + if ($1 eq "WIC") { + $WIC = "/$2"; + } elsif ($1 eq "VIC") { + $WIC = "/$2"; + } else { + $slot = $2; + undef($WIC); + } + $_ = <INPUT>; tr/\015//d; + + # clean up hideous 7200 format to look more like 7500 output + s/Fast-ethernet on C7200 I\/O card/FE-IO/; + s/ with MII or RJ45/-TX/; + s/Fast-ethernet /100Base/; s/[)(]//g; + + /\s+(.*) port adapter,?\s+(\d+)\s+/i && + ProcessHistory("SLOT","","","!\n!Slot $slot: type $1, $2 ports\n"); + # I/O controller with no interfaces + /\s+(.*)\s+port adapter\s*$/i && + ProcessHistory("SLOT","","","!\n!Slot $slot: type $1, 0 ports\n"); + /\s+(.*)\s+daughter card(.*)$/ && + ProcessHistory("SLOT","","","!\n!Slot $slot$WIC: type $1$2\n"); + /\s+(FT1)$/ && + ProcessHistory("SLOT","","","!\n!Slot $slot$WIC: type $1\n"); + next; + } + /revision\s+(\S+).*revision\s+(\S+)/ && + ProcessHistory("SLOT","","","!Slot $slot$WIC: hvers $1 rev $2\n") && + next; + /number\s+(\S+)\s+Part number\s+(\S+)/ && + ProcessHistory("SLOT","","","!Slot $slot$WIC: part $2, serial $1\n") && + next; + } + ProcessHistory("SLOT","","","!\n"); + return(0); +} + +# This routine parses "show module". +sub ShowModule { + print STDERR " In ShowModule: $_" if ($debug); + + my(@lines); + my($slot); + + while (<INPUT>) { + tr/\015//d; + return if (/^\s*\^$/); + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(-1) if (/command authorization failed/i); + + # match slot/card info line + if (/^ *(\d+)\s+(\d+)\s+(.*)\s+(\S+)\s+(\S+)\s*$/) { + $lines[$1] .= "!Slot $1: type $3, $2 ports\n!Slot $1: part $4, serial $5\n"; + $lines[$1] =~ s/\s+,/,/g; + } + # now match the Revs in the second paragraph of o/p and stick it in + # the array with the previous bits...grumble. + if (/^ *(\d+)\s+\S+\s+to\s+\S+\s+(\S+)\s+(\S*)\s+(\S+)(\s+\S+)?\s*$/) { + $lines[$1] .= "!Slot $1: hvers $2, firmware $3, sw $4\n"; + $lines[$1] =~ s/\s+,/,/g; + } + } + foreach $slot (@lines) { + next if ($slot =~ /^\s*$/); + ProcessHistory("Module","","","$slot!\n"); + } + + return(0); +} + +# This routine parses "show c7200" for the 7200 +# This will create arrays for hw info. +sub ShowC7200 { + # Skip if this is not a 7200. + print STDERR " In ShowC7200: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + #return(1) if ($type !~ /^72/); + return(-1) if (/command authorization failed/i); + /^$/ && next; + if (/C7200 Midplane EEPROM:/) { + $_ = <INPUT>; + /revision\s+(\S+).*revision\s+(\S+)/; + ProcessHistory("SLOT","","","!Slot Midplane: hvers $1 rev $2\n"); + $_ = <INPUT>; + /number\s+(\S+)\s+Part number\s+(\S+)/; + ProcessHistory("SLOT","","","!Slot Midplane: part $2, serial $1\n!\n"); + next; + } + if (/C720\d(VXR)? CPU EEPROM:/) { + $_ = <INPUT>; + /revision\s+(\S+).*revision\s+(\S+)/ && + ProcessHistory("SLOT","","","!Slot CPU: hvers $1 rev $2\n"); + $_ = <INPUT>; + /number\s+(\S+)\s+Part number\s+(\S+)/ && + ProcessHistory("SLOT","","","!Slot CPU: part $2, serial $1\n!\n"); + next; + } + } + return(0); +} + +# This routine parses "show vtp status" +sub ShowVTP { + print STDERR " In ShowVTP: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(1) if /^\s*\^\s*$/; + return(1) if /(Invalid input detected|Type help or )/; + #return(1) if ($type !~ /^(2900XL|3500XL|6000)$/); + return(-1) if (/command authorization failed/i); + next if (/^Configuration last modified by/); + if (/^VTP Operating Mode\s+:\s+(Transparent|Server)/) { + $DO_SHOW_VLAN = 1; + } + ProcessHistory("COMMENTS","keysort","I0","!VTP: $_"); + } + ProcessHistory("COMMENTS","keysort","I0","!\n"); + return(0); +} + +# This routine parses "show vlan" +sub ShowVLAN { + print STDERR " In ShowVLAN: $_" if ($debug); + + ($_=<INPUT>,return(1)) if (!$DO_SHOW_VLAN); + + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + next if (/^(\s*|\s*$cmd\s*)$/); + return(1) if /(Invalid input detected|Type help or )/; + #return(1) if ($type !~ /^(2900XL|3500XL|6000)$/); + return(-1) if (/command authorization failed/i); + ProcessHistory("COMMENTS","keysort","IO","!VLAN: $_"); + } + ProcessHistory("COMMENTS","keysort","IO","!\n"); + return(0); +} + +# This routine processes a "write term" +sub WriteTerm { + print STDERR " In WriteTerm: $_" if ($debug); + + while (<INPUT>) { + tr/\015//d; + study; + last if(/^$prompt/); + return(-1) if (/command authorization failed/i); + # the pager can not be disabled per-session on the PIX + s/^<-+ More -+>\s*//; + /Non-Volatile memory is in use/ && return(-1); # NvRAM is locked + # skip the crap + if (/^(##+$|(Building|Current) configuration)/i) { + while (<INPUT>) { + next if (/^Current configuration\s*:/i); + next if (/^:/); + next if (/^([%!].*|\s*)$/); + next if (/^ip add.*ipv4:/); # band-aid for 3620 12.0S + last; + } + if (defined($config_register)) { + ProcessHistory("","","","!\nconfig-register $config_register\n"); + } + tr/\015//d; + } + # some versions have other crap mixed in with the bits in the + # block above + /^! (Last configuration|NVRAM config last)/ && next; + + # Dog gone Cool matches to process the rest of the config + /^tftp-server flash / && next; # kill any tftp remains + /^ntp clock-period / && next; # kill ntp clock-period + /^ length / && next; # kill length on serial lines + /^ width / && next; # kill width on serial lines + /^ clockrate / && next; # kill clockrate on serial interfaces + if (/^(enable )?(password|passwd) / && $filter_pwds >= 1) { + ProcessHistory("ENABLE","","","!$1$2 <removed>\n"); + next; + } + if (/^(enable secret) / && $filter_pwds >= 2) { + ProcessHistory("ENABLE","","","!$1 <removed>\n"); + next; + } + if (/^username (\S+)(\s.*)? secret /) { + if ($filter_pwds >= 2) { + ProcessHistory("USER","keysort","$1","!username $1$2 secret <removed>\n"); + } else { + ProcessHistory("USER","keysort","$1","$_"); + } + next; + } + if (/^username (\S+)(\s.*)? password ((\d) \S+|\S+)/) { + if ($filter_pwds == 2) { + ProcessHistory("USER","keysort","$1","!username $1$2 password <removed>\n"); + } elsif ($filter_pwds == 1 && $4 ne "5"){ + ProcessHistory("USER","keysort","$1","!username $1$2 password <removed>\n"); + } else { + ProcessHistory("USER","keysort","$1","$_"); + } + next; + } + if (/^(\s*)password / && $filter_pwds >= 1) { + ProcessHistory("LINE-PASS","","","!$1password <removed>\n"); + next; + } + if (/^\s*neighbor (\S*) password / && $filter_pwds >= 1) { + ProcessHistory("","","","! neighbor $1 password <removed>\n"); + next; + } + if (/^(ppp .* password) 7 .*/ && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed>\n"); next; + } + if (/^(ip ftp password) / && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed>\n"); next; + } + if (/^( ip ospf authentication-key) / && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed>\n"); next; + } + # this is reversable, despite 'md5' in the cmd + if (/^( ip ospf message-digest-key \d+ md5) / && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed>\n"); next; + } + if (/^((crypto )?isakmp key) \S+ / && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed> $'"); next; + } + # i am told these are plain-text on the PIX + if (/^(vpdn username \S+ password)/ && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed>\n"); next; + } + /fair-queue individual-limit/ && next; + # sort ip explicit-paths. + if (/^ip explicit-path name (\S+)/) { + my($key) = $1; + my($expath) = $_; + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/); + last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/); + if (/^ip explicit-path name (\S+)/) { + ProcessHistory("EXPATH","keysort","$key","$expath"); + $key = $1; + $expath = $_; + } else { + $expath .= $_; + } + } + ProcessHistory("EXPATH","keysort","$key","$expath"); + } + # sort route-maps + if (/^route-map (\S+)/) { + my($key) = $1; + my($routemap) = $_; + while (<INPUT>) { + tr/\015//d; + last if (/^$prompt/ || ! /^(route-map |[ !])/); + if (/^route-map (\S+)/) { + ProcessHistory("ROUTEMAP","keysort","$key","$routemap"); + $key = $1; + $routemap = $_; + } else { + $routemap .= $_; + } + } + ProcessHistory("ROUTEMAP","keysort","$key","$routemap"); + } + # filter out any RCS/CVS tags to avoid confusing local CVS storage + s/\$(Revision|Id):/ $1:/; + # order access-lists + /^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ && + ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next; + # order extended access-lists + /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ && + ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next; + /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ && + ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next; + /^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ && + ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next; + # order arp lists + /^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ && + ProcessHistory("ARP","ipsort","$1","$_") && next; + /^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ && + ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n") + && next; + # order logging statements + /^logging (\d+\.\d+\.\d+\.\d+)/ && + ProcessHistory("LOGGING","ipsort","$1","$_") && next; + # order/prune snmp-server host statements + # we only prune lines of the form + # snmp-server host a.b.c.d <community> + if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) { + if (defined($ENV{'NOCOMMSTR'})) { + my($ip) = $1; + my($line) = "snmp-server host $ip"; + my(@tokens) = split(' ', $'); + my($token); + while ($token = shift(@tokens)) { + if ($token eq 'version') { + $line .= " " . join(' ', ($token, shift(@tokens))); + } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) { + $line .= " " . $token; + } else { + $line = "!$line " . join(' ', ("<removed>", join(' ',@tokens))); + last; + } + } + ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n"); + } else { + ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_"); + } + next; + } + if (/^(snmp-server community) (\S+)/) { + if (defined($ENV{'NOCOMMSTR'})) { + ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 <removed>$'") && next; + } else { + ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next; + } + } + # order/prune tacacs/radius server statements + if (/^(tacacs-server|radius-server) key / && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 key <removed>\n"); next; + } + # order clns host statements + /^clns host \S+ (\S+)/ && + ProcessHistory("CLNS","keysort","$1","$_") && next; + # order alias statements + /^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next; + # delete ntp auth password - this md5 is a reversable too + if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 1) { + ProcessHistory("","","","!$1 <removed>\n"); next; + } + # order ntp peers/servers + if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) { + $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5); + ProcessHistory("NTP","keysort",$sortkey,"$_"); + next; + } + # order ip host line statements + /^ip host line(\d+)/ && + ProcessHistory("IPHOST","numsort","$1","$_") && next; + # order ip nat source static statements + /^ip nat (\S+) source static (\S+)/ && + ProcessHistory("IP NAT $1","ipsort","$2","$_") && next; + # order atm map-list statements + /^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ && + ProcessHistory("ATM map-list","ipsort","$1","$_") && next; + # order ip rcmd lines + /^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next; + + # system controller + /^syscon address (\S*) (\S*)/ && + ProcessHistory("","","","!syscon address $1 <removed>\n") && + next; + if (/^syscon password (\S*)/ && $filter_pwds >= 1) { + ProcessHistory("","","","!syscon password <removed>\n"); + next; + } + + # catch anything that wasnt matched above. + ProcessHistory("","","","$_"); + # end of config. the ": " game is for the PIX + if (/^(: +)?end$/) { + $found_end = 1; + return(1); + } + } + return(0); +} + +# dummy function +sub DoNothing {print STDOUT;} + +# Main +%commands=( + 'show version' => "ShowVersion", + 'show install active' => "ShowInstallActive", + 'show env all' => "ShowEnv", + 'show gsr chassis' => "ShowGSR", + 'show boot' => "ShowBoot", + 'show bootvar' => "ShowBoot", + 'show variables boot' => "ShowBoot", + 'show flash' => "ShowFlash", + 'dir /all nvram:' => "DirSlotN", + 'dir /all bootflash:' => "DirSlotN", + 'dir /all slot0:' => "DirSlotN", + 'dir /all disk0:' => "DirSlotN", + 'dir /all slot1:' => "DirSlotN", + 'dir /all disk1:' => "DirSlotN", + "dir /all sup-bootflash:"=> "DirSlotN", # cat 6500-ios + "dir /all sup-microcode:"=> "DirSlotN", # cat 6500-ios + 'show controllers' => "ShowContAll", + 'show controllers cbus' => "ShowContCbus", + 'show diagbus' => "ShowDiagbus", + 'show diag' => "ShowDiag", + 'show module' => "ShowModule", # cat 6500-ios + 'show c7200' => "ShowC7200", + 'show vtp status' => "ShowVTP", + 'show vlan' => "ShowVLAN", + 'show running' => "WriteTerm" +); +# keys() doesnt return things in the order entered and the order of the +# cmds is important (show version first and write term last). pita +@commands=( + "show version", + "show install active", + "show env all", + "show gsr chassis", + "show boot", + "show bootvar", + "show variables boot", + "show flash", + "dir /all nvram:", + "dir /all bootflash:", + "dir /all slot0:", + "dir /all disk0:", + "dir /all slot1:", + "dir /all disk1:", + "dir /all sup-bootflash:", + "dir /all sup-microcode:", + "show controllers", + "show controllers cbus", + "show diagbus", + "show diag", + "show module", + "show c7200", + "show vtp status", + "show vlan", + "show running" +); +$cisco_cmds=join(";",@commands); +$cmds_regexp=join("|",@commands); + +open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n"; +select(OUTPUT); +# make OUTPUT unbuffered if debugging +if ($debug) { $| = 1; } + +if ($file) { + print STDERR "opening file $host\n" if ($debug); + print STDOUT "opening file $host\n" if ($log); + open(INPUT,"<$host") || die "open failed for $host: $!\n"; +} else { + print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug); + print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log); + if (defined($ENV{NOPIPE})) { + system "clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "clogin failed for $host: $!\n"; + open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n"; + } else { + open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "clogin failed for $host: $!\n"; + } +} + +# determine password filtering mode +if ($ENV{"FILTER_PWDS"} =~ /no/i) { + $filter_pwds = 0; +} elsif ($ENV{"FILTER_PWDS"} =~ /all/i) { + $filter_pwds = 2; +} else { + $filter_pwds = 1; +} + +ProcessHistory("","","","!RANCID-CONTENT-TYPE: force10\n!\n"); +ProcessHistory("COMMENTS","keysort","B0","!\n"); +ProcessHistory("COMMENTS","keysort","F0","!\n"); +ProcessHistory("COMMENTS","keysort","G0","!\n"); +TOP: while(<INPUT>) { + tr/\015//d; + if (/\#\s?exit$/) { + $clean_run=1; + last; + } + if (/^Error:/) { + print STDOUT ("$host clogin error: $_"); + print STDERR ("$host clogin error: $_") if ($debug); + $clean_run=0; + last; + } + while (/#\s*($cmds_regexp)\s*$/) { + $cmd = $1; + if (!defined($prompt)) {$prompt = ($_ =~ /^([^#]+#)/)[0]; } + print STDERR ("HIT COMMAND:$_") if ($debug); + if (! defined($commands{$cmd})) { + print STDERR "$host: found unexpected command - \"$cmd\"\n"; + $clean_run = 0; + last TOP; + } + $rval = &{$commands{$cmd}}; + delete($commands{$cmd}); + if ($rval == -1) { + $clean_run = 0; + last TOP; + } + } +} +print STDOUT "Done $logincmd: $_\n" if ($log); +# Flush History +ProcessHistory("","","",""); +# Cleanup +close(INPUT); +close(OUTPUT); + +if (defined($ENV{NOPIPE})) { + unlink("$host.raw") if (! $debug); +} + +# check for completeness +if (scalar(%commands) || !$clean_run || !$found_end) { + if (scalar(%commands)) { + printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands))); + printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug); + } + if (!$clean_run || !$found_end) { + print STDOUT "$host: End of run not found\n"; + print STDERR "$host: End of run not found\n" if ($debug); + system("/usr/bin/tail -1 $host.new"); + } + unlink "$host.new" if (! $debug); +} |