diff options
Diffstat (limited to 'bin/erancid.in')
-rwxr-xr-x | bin/erancid.in | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/bin/erancid.in b/bin/erancid.in new file mode 100755 index 0000000..185a634 --- /dev/null +++ b/bin/erancid.in @@ -0,0 +1,296 @@ +#!@PERLV_PATH@ +## +## Hacked version of rancid for ADC EZT3 series muxes. Only tested +## with switch software 1.50 so far - terry@tmk.com +## +## +## Copyright (C) 1997 by Henry Kilmer. +## All rights reserved. +## +## This software may be freely copied, modified and redistributed without +## fee for non-commerical purposes provided that this copyright notice is +## preserved intact on all copies and modified copies. +## +## There is no warranty or other guarantee of fitness of this software. +## It is provided solely "as is". The author(s) disclaim(s) all +## responsibility and liability with respect to this software's usage +## or its effect upon hardware, computer systems, other software, or +## anything else. +## +## +# +# RANCID - Really Awesome New Cisco confIg Differ +# +# usage: rancid [-d] [-l] [-f filename | $host] +# +use Getopt::Std; +getopts('dflm'); +$log = $opt_l; +$debug = $opt_d; +$file = $opt_f; +$host = $ARGV[0]; +$clean_run = 0; +$found_end = 0; +$timeo = 90; # clogin timeout in seconds + +# This routine is used to print out the router configuration +sub ProcessHistory { + my($new_hist_tag,$new_command,$command_string,@string)=(@_); + if((($new_hist_tag ne $hist_tag) || ($new_command ne $command)) + && defined %history) { + print eval "$command \%history"; + undef %history; + } + if (($new_hist_tag) && ($new_command) && ($command_string)) { + if ($history{$command_string}) { + $history{$command_string} = "$history{$command_string}@string"; + } else { + $history{$command_string} = "@string"; + } + } elsif (($new_hist_tag) && ($new_command)) { + $history{++$#history} = "@string"; + } else { + print "@string"; + } + $hist_tag = $new_hist_tag; + $command = $new_command; + 1; +} + +sub numerically { $a <=> $b; } + +# This is a sort routing that will sort numerically on the +# keys of a hash as if it were a normal array. +sub keynsort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $key (sort numerically keys(%lines)) { + $sorted_lines[$i] = $lines{$key}; + $i++; + } + @sorted_lines; +} + +# This is a sort routing that will sort on the +# keys of a hash as if it were a normal array. +sub keysort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $key (sort keys(%lines)) { + $sorted_lines[$i] = $lines{$key}; + $i++; + } + @sorted_lines; +} + +# This is a sort routing that will sort on the +# values of a hash as if it were a normal array. +sub valsort{ + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $key (sort values %lines) { + $sorted_lines[$i] = $key; + $i++; + } + @sorted_lines; +} + +# This is a numerical sort routing (ascending). +sub numsort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $num (sort {$a <=> $b} keys %lines) { + $sorted_lines[$i] = $lines{$num}; + $i++; + } + @sorted_lines; +} + +# This is a sort routine that will sort on the +# ip address when the ip address is anywhere in +# the strings. +sub ipsort { + local(%lines)=@_; + local($i) = 0; + local(@sorted_lines); + foreach $addr (sort sortbyipaddr keys %lines) { + $sorted_lines[$i] = $lines{$addr}; + $i++; + } + @sorted_lines; +} + +# These two routines will sort based upon IP addresses +sub ipaddrval { + my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#); + $a[3]+256*($a[2]+256*($a[1]+256*$a[0])); +} +sub sortbyipaddr { + &ipaddrval($a) <=> &ipaddrval($b); +} + +# This routine parses "show version" +sub ShowVersion { + print STDERR " In ShowVersion: $_" if ($debug); + + ProcessHistory("COMMENTS","keysort","A1", + "- Chassis type:EZT3 - an ADC EZT3 M13 multiplexor\n"); + + while (<INPUT>) { + tr/\015//d; + last if(/Active\) >/); + next if(/^(\s*|\s*$cmd\s*)$/); + + /Boot Version (\S*)/ && + ProcessHistory("COMMENTS","keysort","G1", + "- ROM Bootstrap: $1\n") && next; + /Software Version (\S*)/ && + ProcessHistory("COMMENTS","keysort","F1", + "- Software: $1\n") && next; + } + return(0); +} + +# This routine parses "show module" +sub ShowModule { + print STDERR " In ShowModule: $_" if ($debug); + + # eat the header line + $junk = <INPUT>; + + ProcessHistory("SLOT","","","-\n"); + + # now just copy it verbatim to the history file + while (<INPUT>) { + tr/\015//d; + last if(/Active\) >/); + last if(/^$/); + chop; + ProcessHistory("SLOT","","","-$_\n"); + } + ProcessHistory("SLOT","","","-\n"); +} + +# This routine processes a "write term" +sub WriteTerm { + print STDERR " In WriteTerm: $_" if ($debug); + + # eat the header line + $junk = <INPUT>; + + # now just copy it verbatim to the history file + while (<INPUT>) { + tr/\015//d; + last if(/Active\) >/); + chop; + if (/^\s*snmp/ && defined($ENV{'NOCOMMSTR'})) { + /snmp (getcomm|setcomm|trapcomm)(\s+)(\S*)/ && + ProcessHistory("","","","- snmp $1$2\"<removed>\"\n") && next; + } + # believe it or not, "-" is the "whole line is comment" command + ProcessHistory("","","","$_\n"); + } + $found_end = 1; + return(1); +} + +# dummy function +sub DoNothing {print STDOUT;} + +# Main +%commands=( + 'version' => "ShowVersion", + 'equipment' => "ShowModule", + 'config' => "WriteTerm", +); +# keys() doesnt return things in the order entered and the order of the +# cmds is important (show version first and write term last). pita +@commands=( + "version", + "equipment", + "config", +); +$cisco_cmds=join(";",@commands); +$cmds_regexp=join("|",@commands); + +open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n"; +select(OUTPUT); +# make OUTPUT unbuffered if debugging +if ($debug) { $| = 1; } + +if ($file) { + print STDERR "opening file $host\n" if ($debug); + print STDOUT "opening file $host\n" if ($log); + open(INPUT,"<$host") || die "open failed for $host: $!\n"; +} else { + print STDERR "executing elogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug); + print STDOUT "executing elogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log); + if (defined($ENV{NOPIPE})) { + system "elogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "elogin failed for $host: $!\n"; + open(INPUT, "< $host.raw") || die "elogin failed for $host: $!\n"; + } else { + open(INPUT,"elogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "elogin failed for $host: $!\n"; + } +} + +ProcessHistory("COMMENTS","keysort","B0","-\n"); +ProcessHistory("COMMENTS","keysort","F0","-\n"); +ProcessHistory("COMMENTS","keysort","G0","-\n"); +while(<INPUT>) { + tr/\015//d; + if (/Logging out$/) { + $clean_run=1; + last; + } + if (/Error:/) { + s/^.*Error:/Error:/; + print STDOUT ("$host elogin error: $_"); + print STDERR ("$host elogin error: $_") if ($debug); + $clean_run=0; + last; + } + while (/Active\) >\s*($cmds_regexp)\s*$/) { + $cmd = $1; + if (!defined($prompt)) {$prompt = ($_ =~ /^([^#]+#)/)[0]; } + print STDERR ("HIT COMMAND:$_") if ($debug); + if (! defined($commands{$cmd})) { + print STDERR "found unexpected command - \"$cmd\"\n"; + $clean_run = 0; + last; + } + $rval = &{$commands{$cmd}}; + delete($commands{$cmd}); + if ($rval == -1) { + $clean_run = 0; + last; + } + } +} +print STDOUT "Done $logincmd: $_\n" if ($log); +# Flush History +ProcessHistory("","","",""); +# Cleanup +close(INPUT); +close(OUTPUT); + +if (defined($ENV{NOPIPE})) { + unlink("$host.raw") if (! $debug); +} + +# check for completeness +if (scalar(%commands) || !$clean_run || !$found_end) { + if (scalar(%commands)) { + printf(STDOUT "missed cmd(s): %s\n", join(',', keys(%commands))); + printf(STDERR "missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug); + } + if (!$clean_run || !$found_end) { + print STDOUT "End of run not found\n"; + print STDERR "End of run not found\n" if ($debug); + system("/usr/bin/tail -1 $host.new"); + } + unlink "$host.new" if (! $debug); +} |