Imported from rancid-2.0.tar.gz.rancid-2.0

20 files changed, 1822 insertions, 346 deletions

diff --git a/bin/Makefile.in b/bin/Makefile.in
new file mode 100644
index 0000000..ca5616b
--- /dev/null
+++ b/bin/Makefile.in
@@ -0,0 +1,37 @@
+PREFIX = @prefix@
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+BIN_PROGS = @RD_BIN_PROGS@
+BIN_DATAS = @RD_BIN_DATAS@
+
+all:
+
+install: all
+	for prog in $(BIN_PROGS) ; do \
+	    $(INSTALL) $$prog $(PREFIX)/bin; \
+	done; \
+	if test -f $(PREFIX)/bin/env ; then \
+	    echo "WARNING: *** $(PREFIX)/bin/env exists: not installing."; \
+	else \
+	    $(INSTALL_DATA) env $(PREFIX)/bin; \
+	fi  
+# BIN_DATAS are empty at the moment.
+#	for prog in $(BIN_DATAS) ; do \
+#	    $(INSTALL_DATA) $$prog $(PREFIX)/bin; \
+#	done; \
+
+clean:
+	rm -f Makefile env $(BIN_DATAS) $(BIN_PROGS)
+
+distclean: clean
+	rm -f config.log config.status
+
+distdir:
+	for file in Makefile.in configure.in env.in $(BIN_DATAS:=.in) ; do \
+	    $(INSTALL_DATA) $$file $(distdir); \
+	done
+	for file in configure $(BIN_PROGS:=.in) ; do \
+	    $(INSTALL) $$file $(distdir); \
+	done
diff --git a/bin/cat5rancid b/bin/cat5rancid.in
index 8073448..8eb529b 100755
--- a/bin/cat5rancid
+++ b/bin/cat5rancid.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer.
@@ -28,7 +28,9 @@ $file = $opt_f;
 $host = $ARGV[0];
 $clean_run = 0;
 $found_end = 0;
-$timeo = 90;			# clogin timeout in seconds
+$timeo = 90;		# clogin timeout in seconds
+
+my(%modules);		# module info (part from sh ver, part from sh module)
 
 # This routine is used to print out the router configuration
 sub ProcessHistory {
@@ -138,113 +140,90 @@ sub ShowVersion {
 	tr/\015//d;
 	last if(/^$prompt/);
 	next if(/^(\s*|\s*$cmd\s*)$/);
-	if (/^Slave in slot (\d+) is running/) {
-	    $slave = " Slave:";
-	    next;
-	}
-	/^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
+	/^(\S+) Software, Version\s+(.*)$/ &&
 	    ProcessHistory("COMMENTS","keysort","F1",
-		"!Image:$slave Software: $1, $2\n") && next;
-	/^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","F2",
-		"!Image:$slave $1 Synced to mainline version: $2\n") && next;
-	/^Compiled (.*)$/ &&
+		"!Image: Software: $2\n") && next;
+	/^(\S+) S\/W compiled on (.*)$/ &&
 	    ProcessHistory("COMMENTS","keysort","F3",
-		"!Image:$slave Compiled: $1\n") && next;
-	/^ROM: (System )?Bootstrap.*(Version.*)$/ &&
+		"!Image: Compiled: $1 on $2\n") && next;
+	/^System Bootstrap (Version.*)$/ &&
 	    ProcessHistory("COMMENTS","keysort","G1",
-		"!ROM Bootstrap: $2\n") && next;
-	/^ROM: \d+ Bootstrap .*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G2",
-		"!ROM Image: Bootstrap $1\n!\n") && next;
-	/^ROM: .*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
-	/^BOOTFLASH: .*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
-	/^System image file is "([^\"]*)", booted via (\S*)/ &&
-# removed the booted source due to
-# CSCdk28131: cycling info in 'sh ver'
-#	ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") &&
-	    ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
-	    next;
-	/^System image file is "([^\"]*)"$/ &&
-	    ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
-	if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+K) bytes/) {
-	    my($proc) = $1;
-	    my($cpu) = $2;
-	    my($mem) = $3;
-	    if ( $1 eq "CSC") {
-		$type = "AGS";
-	    } elsif ( $1 eq "CSC4") {
-		$type = "AGS+";
-	    } elsif ( $1 eq "2511" || $1 eq "2524" || $1 eq "AS2511-RJ") {
-		$type = "2500";
-	    } elsif ( $1 eq "3620" || $1 eq "3640") {
-		$type = "3600";
-	    } elsif ( $1 eq "RSP7000") {
-		$type = "7500";
-	    } elsif ( $1 =~ /RSP\d/) {
-		$type = "7500";
-	    } elsif ( $1 eq "RP1") {
-		$type = "7000";
-	    } elsif ( $1 eq "RP") {
-		$type = "7000";
-	    } elsif ( $1 =~ /720[246]/) {
-		$type = "7200";
-	    } elsif ($1 =~ /1200[48]\/GRP/ || $1 =~ /1201[26]\/GRP/) {
-		$type = "12000";
-	    } else {
-		$type = $1;
-	    }
-	    print STDERR "TYPE = $type\n" if ($debug);
+		"!Bootstrap: $1\n") && next;
+	if (/^Hardware Version: (\S+)  Model: (\S+)  Serial #: (\S+)/) {
+	    my($proc) = $2;
+	    # Really should figure out types of switches here.
+	    $type = $2;
 	    ProcessHistory("COMMENTS","keysort","A1",
-		"!Chassis type:$slave $proc - a $type router\n");
-	    ProcessHistory("COMMENTS","keysort","B1",
-		"!Memory:$slave main $mem\n");
-	    ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n");
+		"!Chassis type: $proc - a $type switch\n");
+	    ProcessHistory("COMMENTS","keysort","C1", "!Serial Number: $3\n");
+	    ProcessHistory("COMMENTS","keysort","C2", "!Hardware Version: $1\n");
 	    next;
 	}
-	if (/(\S+) Silicon\s*Switch Processor/) {
-	    if (!defined($C0)) {
-		$C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
+	# stuff module h/w, s/w, ports, etc into %module
+	if (/^Mod\s+Port\s+Model/) {
+	    <INPUT>;
+	    my($slot);
+	    while (<INPUT>) {
+		tr/\015//d;
+		last if (/^\s*$/);
+		if (/^(\d+)\s+(\d+)\s+(\S+)\s+(\S+)\s+(\S+)\s?:\s+(\S+)/) {
+		    $slot = $1;
+		    $modules{$slot}->{ports} = $2;
+		    $modules{$slot}->{model} = $3;
+		    $modules{$slot}->{serial} = $4;
+		    $modules{$slot}->{$5} = $6;		# revision info
+		}
+		/^\s+(\S+)\s?:\s+(\S+)/ &&
+		    ($modules{$slot}->{$1} = $2);
 	    }
-	    ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
-	    $ssp = 1;
-	    $sspmem = $1;
 	    next;
 	}
-	/^(\d+K) bytes of multibus/ &&
-	    ProcessHistory("COMMENTS","keysort","B2",
-		"!Memory: multibus $1\n") && next;
-	/^(\d+K) bytes of non-volatile/ &&
-	    ProcessHistory("COMMENTS","keysort","B3",
-		"!Memory: nvram $1\n") && next;
-	/^(\d+K) bytes of flash memory/ &&
-	    ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
-	    next;
-	/^(\d+K) bytes of .*flash partition/ &&
-	    ProcessHistory("COMMENTS","keysort","B6",
-		"!Memory: flash partition $1\n") && next;
-	/^(\d+K) bytes of Flash internal/ &&
-	    ProcessHistory("COMMENTS","keysort","B4",
-		"!Memory: bootflash $1\n") && next;
-	if(/^(\d+K) bytes of (Flash|ATA)?.*PCMCIA .*slot ?(\d)/i) {
-	    ProcessHistory("COMMENTS","keysort","B7",
-		"!Memory: pcmcia $2 slot$3 $1\n");
+	# stuff module h/w, s/w, ports, etc into %module - yet another format
+	if (/^Module\s+Ports\s+Model/) {
+	    <INPUT>;
+	    my($slot);
+	    while (<INPUT>) {
+		tr/\015//d;
+		last if (/^\s*$/);
+		if (/^(\d+)\s+(\d+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+\s+)?(\S+)\s*$/) {
+		    $slot = $1;
+		    $modules{$slot}->{ports} = $2;
+		    $modules{$slot}->{model} = $3;
+		    $modules{$slot}->{serial} = $4;
+		    $modules{$slot}->{Hw} = $5;
+		    $modules{$slot}->{Fw} = $6;
+		    $modules{$slot}->{Sw} = $8;
+		    $modules{$slot}->{Fw1} = $7;
+		    $modules{$slot}->{Fw1} =~ s/\s*$//;
+		    if ($modules{$slot}->{Fw1} =~ /^$/) {delete($modules{$slot}->{Fw1});}
+		}
+	    }
 	    next;
 	}
-	if(/^WARNING/) {
-	    if (!defined($I0)) {
-		$I0=1;
-		ProcessHistory("COMMENTS","keysort","I0","!\n");
-	    }
-	    ProcessHistory("COMMENTS","keysort","I1","! $_");
-	    # The line after the WARNING is what to do about it.
+	if (/^       DRAM/) {
+	    # Eat 2 lines & then get the total dram, flash, & nvram.
+	    $_ = <INPUT>; $_ = <INPUT>;
 	    $_ = <INPUT>; tr/\015//d;
-	    ProcessHistory("COMMENTS","keysort","I1","!          $_");
+	    /\S+\s+(\S+)\s+\S+\s+\S+\s+(\S+)\s+\S+\s+\S+\s+(\S+)/ &&
+		ProcessHistory("COMMENTS","keysort","B1",
+		    "!Memory: dram $1\n") &&
+		ProcessHistory("COMMENTS","keysort","B5",
+		    "!Memory: flash $2\n") &&
+		ProcessHistory("COMMENTS","keysort","B2",
+		    "!Memory: nvram $3\n");
+	    next;
 	}
-	if (/^Configuration register is (.*)$/) {
-	    $config_register=$1;
+	if (/^Module DRAM/) {
+	    # Eat a line & then get the total dram, flash, & nvram.
+	    $_ = <INPUT>;
+	    $_ = <INPUT>; tr/\015//d;
+	    /\S+\s+(\S+)\s+(\S+)\s+(\S+)/ &&
+		ProcessHistory("COMMENTS","keysort","B1",
+		    "!Memory: dram $1\n") &&
+		ProcessHistory("COMMENTS","keysort","B5",
+		    "!Memory: flash $2\n") &&
+		ProcessHistory("COMMENTS","keysort","B2",
+		    "!Memory: nvram $3\n");
 	    next;
 	}
     }
@@ -336,8 +315,6 @@ sub ShowGSR {
 
 # This routine parses "show boot"
 sub ShowBoot {
-    # Pick up boot variables if 7000/7200/7500/12000;
-    # otherwise pick up bootflash.
     print STDERR "    In ShowBoot: $_" if ($debug);
 
     while (<INPUT>) {
@@ -353,10 +330,12 @@ sub ShowBoot {
 	if (!defined($H0)) {
 	    $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
 	}
-	if ($type !~ /^(120|7)/) {
-	    ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
-	} elsif (/variable/) {
-	    ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
+	/^(\S+) variable (.*)$/ &&
+	    ProcessHistory("COMMENTS","keysort","H1","!Variable: $1 $2\n") &&
+	    next;
+	if (/^Configuration register is (.*)$/) {
+	    $config_register=$1;
+	    next;
 	}
     }
     ProcessHistory("COMMENTS","","","!\n");
@@ -683,32 +662,106 @@ sub ShowDiag {
 
 # This routine parses "show module"
 sub ShowModule {
+    my($slot);
     print STDERR "    In ShowModule: $_" if ($debug);
 
-#    # eat the header lines
-#    $junk = <INPUT>;
-#    $junk = <INPUT>;
-    
-    while (<INPUT>) {
+OUTER:while (<INPUT>) {
         tr/\015//d;
         last if(/^$prompt/);
-#        last if(/^$/);
-#        $junk = $_;
-#        $slot = substr($junk, 0, 2) + 0;
-#        $port = substr($junk, 24, 3) + 0;
-#        $plu = "";
-#        $plu = "s" if $port > 1; 
-#        $type = substr($junk, 30, 21);
-#        $type =~ s/^\s+//;
-#        $type =~ s/\s+$//; 
-#        $board = substr($junk, 52, 9);
-#        $board =~ s/ //;
-#        $serial = substr($junk, 62,9) + 0;
-#        ProcessHistory("SLOT","","","!Slot $slot/$board: $type, $port port$plu, serial $serial\n");
-        ProcessHistory("SLOT","","","! $_");
+	# stuff module type into %module
+	if (/^Mod\s+Slot\s+Ports/) {
+	    <INPUT>;
+	    while (<INPUT>) {
+		tr/\015//d;
+		last if (/^\s*$/);
+		last OUTER if (/^$prompt/);
+		if (/^Module .*mismatch/) {
+		    ProcessHistory("MODWARN","","","!\n! WARNING: $_");
+		    while (<INPUT>) {
+			tr/\015//d;
+			last OUTER if (/^\s*$/);
+			last if (/^\d/);
+			ProcessHistory("MODWARN","","","!          $_");
+		    }
+		}
+		if (/^(\d+)\s+\d+\s+\d+\s+(.*)\s+\S+\s+\S+\s*$/) {
+		    $modules{$1}->{type} = $2;
+		    $modules{$1}->{type} =~ s/\s{2,}.*$//;
+		}
+	    }
+	    next;
+	}
+        # one does it one way... pita
+	if (/^Mod\s+Module-Name\s+Ports/) {
+	    <INPUT>;
+	    #my($slot);
+	    while (<INPUT>) {
+		tr/\015//d;
+		last if (/^\s*$/);
+		last OUTER if (/^$prompt/);
+		if (/^(\d+)\s+(\S+\s+)?\d+\s+(.*)\s+\S+\s+(\S+)\s+\S+\s*$/) {
+		    $modules{$1}->{serial} = $4;
+		    $modules{$1}->{type} = $3;
+		    #$modules{$1}->{type} =~ s/\s{2,}.*$//;
+		    $modules{$1}->{type} =~ s/\s*$//;
+		}
+	    }
+	    next;
+	}
+        # daughter boards
+	if (/^Mod\s+Sub-Type/) {
+	    <INPUT>;
+	    my($slot, $board);
+	    while (<INPUT>) {
+		tr/\015//d;
+		last if (/^\s*$/);
+		last OUTER if (/^$prompt/);
+		if (/^(\d+)\s+(\S+.*\s+)?(\S+)\s+(\S+)\s+(\S+)\s*$/) {
+		    $board = 0 if ($slot != $1);
+		    $slot = $1;
+		    $modules{$1}->{daughter}->{$board}->{model} = $3;
+		    $modules{$1}->{daughter}->{$board}->{serial} = $4;
+		    $modules{$1}->{daughter}->{$board}->{Hw} = $5;
+		    $modules{$1}->{daughter}->{$board}->{type} = $2;
+		    $modules{$1}->{daughter}->{$board}->{type} =~ s/\s*$//;
+		    $board++;
+		}
+	    }
+	    next;
+	}
+    }
+
+    # dump the module info
+    foreach $slot (sort numerically keys(%modules)) {
+	my($dboards);
+	ProcessHistory("MODS","","","!\n");
+	ProcessHistory("MODS","","",sprintf("!Slot $slot: type %s, %d ports\n", $modules{$slot}->{type}, $modules{$slot}->{ports}));
+	delete($modules{$slot}->{ports});
+	delete($modules{$slot}->{type});
+	my($model) = sprintf("!Slot $slot: part %s, serial %s\n", $modules{$slot}->{model}, $modules{$slot}->{serial});
+	delete($modules{$slot}->{model});
+	delete($modules{$slot}->{serial});
+	# deal with daughter boards before slot versions
+	if (defined($modules{$slot}->{daughter})) {
+	    my($board);
+	    foreach $board (sort numerically keys(%{$modules{$slot}->{daughter}})) {
+		$dboards .= sprintf("!Slot $slot/$board: type %s\n", $modules{$slot}->{daughter}->{$board}->{type});
+		$dboards .= sprintf("!Slot $slot/$board: hvers %s\n", $modules{$slot}->{daughter}->{$board}->{Hw});
+		$dboards .= sprintf("!Slot $slot/$board: part %s, serial %s\n", $modules{$slot}->{daughter}->{$board}->{model}, $modules{$slot}->{daughter}->{$board}->{serial});
+	    }
+	    delete($modules{$slot}->{daughter});
+	}
+	my($ver); my($i) = 0;
+	ProcessHistory("MODS","","","!Slot $slot:");
+	foreach $ver (sort keys(%{$modules{$slot}})) {
+	    if ($i) {ProcessHistory("MODS","","",",");}
+	    ProcessHistory("MODS","","",sprintf(" %s: %s", $ver, $modules{$slot}->{$ver}));
+	    $i++;
+	}
+	ProcessHistory("MODS","","","\n");
+	ProcessHistory("MODS","","",$model);
+	if ($dboards) {ProcessHistory("MODS","","",$dboards);}
     }
-    # The "write term" code gives us one of these, so skip it here
-    # ProcessHistory("SLOT","","","!\n");
 }   
 
 # This routine parses "show c7200" for the 7200
@@ -749,12 +802,15 @@ sub ShowC7200 {
 sub WriteTerm {
     print STDERR "    In WriteTerm: $_" if ($debug);
 
+    ProcessHistory("","","","!\n");
     while (<INPUT>) {
 	tr/\015//d;
 	last if (/^$prompt/);
-#heas	next if (/^\.+$/);
+	next if (/^\.+$/ | /^$/);
 	/Non-Volatile memory is in use/  && return(-1); # NvRAM is locked
 	# skip the crap
+	next if (/^This command shows non-default configurations only./i);
+	next if (/^Use 'write terminal all' to show both default and non/i);
 	if (/^(\.\.+$|##+$|Building configuration...)/i) {
 	    while (<INPUT>) {
 		tr/\015//d;
@@ -764,6 +820,9 @@ sub WriteTerm {
 		last;
 	    }
 	    ProcessHistory("","","","!\n");
+	    if (defined($config_register)) {
+		ProcessHistory("","","","config-register $config_register\n");
+	    }
 	    tr/\015//d;
 	}
 	# some versions have other crap mixed in with the bits in the
@@ -857,7 +916,7 @@ sub WriteTerm {
         # snmp-server host a.b.c.d <community>
 	if (/^set snmp trap (\d+\.\d+\.\d+\.\d+) /) {
 	    if (defined($ENV{'NOCOMMSTR'})) {
-		ProcessHistory("SNMPSERVERHOST","ipsort","$1","# set snmp trap $1 <removed>\n");
+		ProcessHistory("SNMPSERVERHOST","ipsort","$1","!set snmp trap $1 <removed>\n");
 	    } else {
 		ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
 	    } 
@@ -865,7 +924,7 @@ sub WriteTerm {
 	}
 	if (/^(set snmp community) (\S+) (\S+)/) {
 	    if (defined($ENV{'NOCOMMSTR'})) {
-		ProcessHistory("SNMPSERVERCOMM","keysort","$_","#$1 $2 <removed>\n");
+		ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 $2 <removed>\n");
 	    } else {
 		ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_")
 	    }
@@ -873,7 +932,7 @@ sub WriteTerm {
 	}
 	# order tacacs server statements
 	/^set (tacacs) key / &&
-	    ProcessHistory("","","","! set $1 key <removed>\n") && next;
+	    ProcessHistory("","","","!set $1 key <removed>\n") && next;
 	/^set tacacs server (\d+\.\d+\.\d+\.\d+)/ &&
 	    ProcessHistory("TAC","ipsort","$1","$_") && next;
 	# order clns host statements
@@ -918,46 +977,24 @@ sub DoNothing {print STDOUT;}
 # Main
 %commands=(
 	'show version'		=> "ShowVersion",
-#	'show install active'	=> "ShowInstallActive",
-#	'show env all'		=> "ShowEnv",
-#	'show gsr chassis'	=> "ShowGSR",
 	'show boot'		=> "ShowBoot",
-#	'show bootvar'		=> "ShowBoot",
 	'show flash'		=> "ShowFlash",
 	'dir bootflash:'	=> "DirSlotN",
 	'dir slot0:'		=> "DirSlotN",
-#	'dir  /all disk0:'	=> "DirSlotN",
 	'dir slot1:'		=> "DirSlotN",
-#	'dir /all disk1:'	=> "DirSlotN",
-#	'show controllers'	=> "ShowContAll",
-#	'show controllers cbus'	=> "ShowContCbus",
-#	'show diagbus'		=> "ShowDiagbus",
-#	'show diag'		=> "ShowDiag",
 	'show module'		=> "ShowModule",
-#	'show c7200'		=> "ShowC7200",
 	'write term'		=> "WriteTerm"
 );
 # keys() doesnt return things in the order entered and the order of the
 # cmds is important (show version first and write term last). pita
 @commands=(
 	"show version",
-#	"show install active",
-#	"show env all",
-#	"show gsr chassis",
 	"show boot",
-#	"show bootvar",
 	"show flash",
 	"dir bootflash:",
 	"dir slot0:",
-#	"dir /all disk0:",
 	"dir slot1:",
-#	"dir /all disk1:",
-#	"show controllers",
-#	"show controllers cbus",
-#	"show diagbus",
-#	"show diag",
 	"show module",
-#	"show c7200",
 	"write term"
 );
 $cisco_cmds=join(";",@commands);
@@ -1001,7 +1038,6 @@ TOP: while(<INPUT>) {
     }
     while (/> \(enable\)\s*($cmds_regexp)\s*$/) {
 	$cmd = $1;
-#	if (!defined($prompt)) {$prompt = ($_ =~ /^([^>]+> .enable.)/)[0]; }
 	if (!defined($prompt)) {$prompt = ($_ =~ /^([^>]+>)/)[0]; }
 	print STDERR ("HIT COMMAND:$_") if ($debug);
 	if (! defined($commands{$cmd})) {
diff --git a/bin/clogin b/bin/clogin.in
index 1b345be..bfe3ae1 100755
--- a/bin/clogin
+++ b/bin/clogin.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/expect --
+#!@EXPECT_PATH@ --
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer, Erik Sherk and Pete Whiting.
@@ -252,39 +252,56 @@ proc source_password_file { } {
 }
 
 # Log into the router.
-proc login { router user userpswd passwd enapasswd prompt cyphertype } {
+proc login { router user userpswd passwd enapasswd prompt cmethod cyphertype } {
     global spawn_id in_proc do_command do_script
     global u_prompt p_prompt e_prompt
     set in_proc 1
-    set tryssh 1
 
-    # Telnet to the router & try to login.
-    if [ catch {spawn telnet $router} reason ] {
-	send_user "Error: failed to telnet: $reason\n"
-	exit 1
-    }
-    sleep 0.3
-
-    # This helps cleanup each expect clause.
-    expect_after {
-	timeout {
-	    send_user "\nError: TIMEOUT reached\n"
-	    catch {close}; wait
-	    if { $in_proc} {
-		return 1
-	    } else {
-		continue
+    # try each of the connection methods in $cmethod until one is successful
+    set progs [llength $cmethod]
+    foreach prog [lrange $cmethod 0 end] {
+	if ![string compare $prog "telnet"] {
+	    if [ catch {spawn telnet $router} reason ] {
+		send_user "Error: telnet failed: $reason\n"
+		exit 1
 	    }
-	} eof {
-	    send_user "\nError: EOF received\n"
-	    catch {close}; wait
-	    if { $in_proc} {
-		return 1
-	    } else {
-		continue
+	} elseif ![string compare $prog "ssh"] {
+	    if [ catch {spawn ssh -c $cyphertype -x -l $user $router} reason ] {
+		send_user "Error: ssh failed: $reason\n"
+		exit 1
+	    }
+	} elseif ![string compare $prog "rsh"] {
+	    if [ catch {spawn rsh -l $user $router} reason ] {
+		send_user "Error: rsh failed: $reason\n"
+		exit 1
+	    }
+	} else {
+	    puts "ERROR: unknown connection method: $prog"
+	    return 1
+	}
+	incr progs -1
+	sleep 0.3
+
+	# This helps cleanup each expect clause.
+	expect_after {
+	    timeout {
+		send_user "\nError: TIMEOUT reached\n"
+		catch {close}; wait
+		if { $in_proc} {
+		    return 1
+		} else {
+		    continue
+		}
+	    } eof {
+		send_user "\nError: EOF received\n"
+		catch {close}; wait
+		if { $in_proc} {
+		    return 1
+		} else {
+		    continue
+		}
 	    }
 	}
-    }
 
     # Here we get a little tricky.  There are several possibilities:
     # the router can ask for a username and passwd and then
@@ -294,29 +311,20 @@ proc login { router user userpswd passwd enapasswd prompt cyphertype } {
     # then it will just send the passwd.
     # if telnet fails with connection refused, try ssh
     expect {
-	"Connection refused" {
-	    close; wait
-	    if { $tryssh } {
-	    if [ catch {spawn ssh -c $cyphertype -x -l $user $router} reason ] {
-		send_user "Error: failed to ssh: $reason\n"
-		exit 1
-	    }
-	    set tryssh 0
-	    sleep 0.3
-	    exp_continue
-	    } else {
-		expect eof
-		send_user "Error: Connection Refused\n"; wait; return 1
+	-re "(Connection refused|Secure connection \[^\n\r]+ refused|Connection closed by)" {
+	    catch {close}; wait
+	    if !$progs {
+		send_user "\nError: Connection Refused ($prog)\n"; return 1
 	    }
 	} eof { send_user "Error: Couldn't login\n"; wait; return 1
-	} "Unknown host\r\n" {
-	    expect eof
+	} -nocase "unknown host\r" {
+	    catch {close};
 	    send_user "Error: Unknown host\n"; wait; return 1
 	} "Host is unreachable" {
-	    expect eof
+	    catch {close};
 	    send_user "Error: Host Unreachable!\n"; wait; return 1
 	} "No address associated with name" {
-	    expect eof
+	    catch {close};
 	    send_user "Error: Unknown host\n"; wait; return 1
 	}
 	-re "Host key not found .* \(yes\/no\)\?" {
@@ -330,12 +338,18 @@ proc login { router user userpswd passwd enapasswd prompt cyphertype } {
 	-re "$u_prompt"	{ send "$user\r"
 	    expect {
 		eof			{ send_user "Error: Couldn't login\n"; wait; return 1 }
+		"Login invalid"		{ send_user "Error: Invalid login\n"; vatch {close}; wait; return 1 }
 		-re "$p_prompt"		{ send "$userpswd\r" }
 		"$prompt"		{ set in_proc 0; return 0 }
 	    }
 	    exp_continue
 	}
-	-re "$p_prompt"	{ send "$passwd\r"
+	-re "$p_prompt"	{
+	    if ![string compare $prog "ssh"] {
+		send "$userpswd\r"
+	    } else {
+		send "$passwd\r"
+	    }
 	    expect {
 		eof		{ send_user "Error: Couldn't login\n"; wait; return 1 }
 		-re "$e_prompt"	{ send "$enapasswd\r" }
@@ -343,7 +357,7 @@ proc login { router user userpswd passwd enapasswd prompt cyphertype } {
 	    }
 	    exp_continue
 	}
-	"$prompt"	{ }
+	"$prompt"	{ break; }
 	denied		{ send_user "Error: Check your passwd for $router\n"
 			    if { $do_command || $do_script } {
 			      send "exit\r"
@@ -355,6 +369,7 @@ proc login { router user userpswd passwd enapasswd prompt cyphertype } {
 			}
 	"% Bad passwords" {send_user "Error: Check your passwd for $router\n"; return 1 }
     }
+}
     set in_proc 0
     return 0
 }
@@ -404,19 +419,27 @@ proc run_commands { prompt command } {
 	set commands [split $command \;]
 	set num_commands [llength $commands]
 
+	# the pager can not be turned off on the PIX, so we have to look
+	# for the "More" prompt
 	for {set i 0} {$i < $num_commands} { incr i} {
 	    send "[subst -nocommands [lindex $commands $i]]\r"
 	    expect {
-		-re "^\[^\n\r]*$reprompt."	{ exp_continue }
 		-re "^\[^\n\r *]*$reprompt"	{}
+		-re "^\[^\n\r]*$reprompt."	{ exp_continue }
+		-re "^<--- More --->"		{ send " "
+						  exp_continue }
 		-re "\[\n\r]"			{ exp_continue }
 	    }
 	}
     } else {
+	# the pager can not be turned off on the PIX, so we have to look
+	# for the "More" prompt
 	send "[subst -nocommands $command]\r"
 	expect {
-		-re "^\[^\n\r]*$reprompt."	{ exp_continue }
 		-re "^\[^\n\r *]*$reprompt"	{}
+		-re "^\[^\n\r]*$reprompt."	{ exp_continue }
+		-re "^<--- More --->"		{ send " "
+						  exp_continue }
 		-re "\[\n\r]"			{ exp_continue }
 	}
     }
@@ -506,7 +529,7 @@ foreach router [lrange $argv $i end] {
     set u_prompt [find userprompt $router]
     if { "$u_prompt" == "" } { set u_prompt "(Username|login):" }
     set p_prompt [find passprompt $router]
-    if { "$p_prompt" == "" } { set p_prompt "\[Pp]assword:" }
+    if { "$p_prompt" == "" } { set p_prompt "(\[Pp]assword|passwd):" }
     set e_prompt [find enableprompt $router]
     if { "$e_prompt" == "" } { set e_prompt "\[Pp]assword:" }
 
@@ -519,8 +542,12 @@ foreach router [lrange $argv $i end] {
       if { "$cyphertype" == "" } { set cyphertype "3des" }
     }
 
+    # Figure out connection method
+    set cmethod [find method $router]
+    if { "$cmethod" == "" } { set cmethod {{telnet} {ssh}} }
+
     # Login to the router
-    if {[login $router $ruser $userpswd $passwd $enapasswd $prompt $cyphertype]} {
+    if {[login $router $ruser $userpswd $passwd $enapasswd $prompt $cmethod $cyphertype]} {
 	continue
     }
     if { $enable } {
diff --git a/bin/configure b/bin/configure
new file mode 100755
index 0000000..b586b8d
--- /dev/null
+++ b/bin/configure
@@ -0,0 +1,1239 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_default_prefix=/usr/local/rancid
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.13"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:560: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+RD_BIN_DATAS=$rd_cv_rd_bin_datas
+
+RD_BIN_PROGS=$rd_cv_rd_bin_progs
+
+
+PERLV_PATH=$ac_cv_path_PERLV_PATH
+
+EXPECT_PATH=$ac_cv_path_EXPECT_PATH
+
+
+# locate tools to build $PATH for env.  order is significant.  want to be
+# sure that we pick up the the proper diff and ucbmail in bin/env.
+unset ENV_PATH
+# Extract the first word of "diff", so it can be a program name with args.
+set dummy diff; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:629: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_DIFF'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$DIFF" in
+  /*)
+  ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_DIFF="$DIFF" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_DIFF="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_DIFF" && ac_cv_path_DIFF="no"
+  ;;
+esac
+fi
+DIFF="$ac_cv_path_DIFF"
+if test -n "$DIFF"; then
+  echo "$ac_t""$DIFF" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH=`dirname $ac_cv_path_DIFF`
+# Extract the first word of "Mail", so it can be a program name with args.
+set dummy Mail; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:666: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_UCBMAIL'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$UCBMAIL" in
+  /*)
+  ac_cv_path_UCBMAIL="$UCBMAIL" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_UCBMAIL="$UCBMAIL" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_UCBMAIL="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_UCBMAIL" && ac_cv_path_UCBMAIL="no"
+  ;;
+esac
+fi
+UCBMAIL="$ac_cv_path_UCBMAIL"
+if test -n "$UCBMAIL"; then
+  echo "$ac_t""$UCBMAIL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_UCBMAIL`"
+# Extract the first word of "cvs", so it can be a program name with args.
+set dummy cvs; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:703: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_CVS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$CVS" in
+  /*)
+  ac_cv_path_CVS="$CVS" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_CVS="$CVS" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_CVS="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_CVS" && ac_cv_path_CVS="no"
+  ;;
+esac
+fi
+CVS="$ac_cv_path_CVS"
+if test -n "$CVS"; then
+  echo "$ac_t""$CVS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_CVS`"
+# Extract the first word of "comm", so it can be a program name with args.
+set dummy comm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:740: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_COMM'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$COMM" in
+  /*)
+  ac_cv_path_COMM="$COMM" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_COMM="$COMM" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_COMM="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_COMM" && ac_cv_path_COMM="no"
+  ;;
+esac
+fi
+COMM="$ac_cv_path_COMM"
+if test -n "$COMM"; then
+  echo "$ac_t""$COMM" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_COMM`"
+# Extract the first word of "mkdir", so it can be a program name with args.
+set dummy mkdir; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:777: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MKDIR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MKDIR" in
+  /*)
+  ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_MKDIR="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MKDIR" && ac_cv_path_MKDIR="no"
+  ;;
+esac
+fi
+MKDIR="$ac_cv_path_MKDIR"
+if test -n "$MKDIR"; then
+  echo "$ac_t""$MKDIR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_MKDIR`"
+# Extract the first word of "dirname", so it can be a program name with args.
+set dummy dirname; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:814: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_DIRNAME'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$DIRNAME" in
+  /*)
+  ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_DIRNAME="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_DIRNAME" && ac_cv_path_DIRNAME="no"
+  ;;
+esac
+fi
+DIRNAME="$ac_cv_path_DIRNAME"
+if test -n "$DIRNAME"; then
+  echo "$ac_t""$DIRNAME" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_DIRNAME`"
+# Extract the first word of "touch", so it can be a program name with args.
+set dummy touch; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:851: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_TOUCH'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$TOUCH" in
+  /*)
+  ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_TOUCH="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_TOUCH" && ac_cv_path_TOUCH="no"
+  ;;
+esac
+fi
+TOUCH="$ac_cv_path_TOUCH"
+if test -n "$TOUCH"; then
+  echo "$ac_t""$TOUCH" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_TOUCH`"
+# Extract the first word of "sendmail", so it can be a program name with args.
+set dummy sendmail; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:888: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_SENDMAIL'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$SENDMAIL" in
+  /*)
+  ac_cv_path_SENDMAIL="$SENDMAIL" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_SENDMAIL="$SENDMAIL" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_SENDMAIL="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_SENDMAIL" && ac_cv_path_SENDMAIL="no"
+  ;;
+esac
+fi
+SENDMAIL="$ac_cv_path_SENDMAIL"
+if test -n "$SENDMAIL"; then
+  echo "$ac_t""$SENDMAIL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_SENDMAIL`"
+# Extract the first word of "sort", so it can be a program name with args.
+set dummy sort; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:925: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_SORT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$SORT" in
+  /*)
+  ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_SORT="$SORT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_SORT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_SORT" && ac_cv_path_SORT="no"
+  ;;
+esac
+fi
+SORT="$ac_cv_path_SORT"
+if test -n "$SORT"; then
+  echo "$ac_t""$SORT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+  
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_SORT`"
+ENV_PATH="$ENV_PATH:/usr/local/bin:/usr/bin"
+
+ENV_PATH=`echo $ENV_PATH | $PERLV_PATH -e 'foreach $x(split(":",<>)){next unless (length($x));push(@F, $x),$seen{$x}=1 unless (defined $seen{$x});}print join(":",@F);'`
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile env $RD_BIN_DATAS $RD_BIN_PROGS" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@RD_BIN_DATAS@%$RD_BIN_DATAS%g
+s%@RD_BIN_PROGS@%$RD_BIN_PROGS%g
+s%@PERLV_PATH@%$PERLV_PATH%g
+s%@EXPECT_PATH@%$EXPECT_PATH%g
+s%@DIFF@%$DIFF%g
+s%@UCBMAIL@%$UCBMAIL%g
+s%@CVS@%$CVS%g
+s%@COMM@%$COMM%g
+s%@MKDIR@%$MKDIR%g
+s%@DIRNAME@%$DIRNAME%g
+s%@TOUCH@%$TOUCH%g
+s%@SENDMAIL@%$SENDMAIL%g
+s%@SORT@%$SORT%g
+s%@ENV_PATH@%$ENV_PATH%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile env $RD_BIN_DATAS $RD_BIN_PROGS"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+
+# fix permissions on scripts.
+for file in $RD_BIN_PROGS; do chmod a+x $file; done
diff --git a/bin/configure.in b/bin/configure.in
new file mode 100644
index 0000000..cdade86
--- /dev/null
+++ b/bin/configure.in
@@ -0,0 +1,49 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_INIT()
+
+dnl default install location
+AC_PREFIX_DEFAULT(/usr/local/rancid)
+
+dnl install program(s)
+AC_PROG_INSTALL
+
+RD_BIN_DATAS=$rd_cv_rd_bin_datas
+AC_SUBST(RD_BIN_DATAS)
+RD_BIN_PROGS=$rd_cv_rd_bin_progs
+AC_SUBST(RD_BIN_PROGS)
+
+PERLV_PATH=$ac_cv_path_PERLV_PATH
+AC_SUBST(PERLV_PATH)
+EXPECT_PATH=$ac_cv_path_EXPECT_PATH
+AC_SUBST(EXPECT_PATH)
+
+# locate tools to build $PATH for env.  order is significant.  want to be
+# sure that we pick up the the proper diff and ucbmail in bin/env.
+unset ENV_PATH
+AC_PATH_PROG(DIFF,diff,no)
+ENV_PATH=`dirname $ac_cv_path_DIFF`
+AC_PATH_PROG(UCBMAIL,Mail,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_UCBMAIL`"
+AC_PATH_PROG(CVS,cvs,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_CVS`"
+AC_PATH_PROG(COMM,comm,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_COMM`"
+AC_PATH_PROG(MKDIR,mkdir,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_MKDIR`"
+AC_PATH_PROG(DIRNAME,dirname,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_DIRNAME`"
+AC_PATH_PROG(TOUCH,touch,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_TOUCH`"
+AC_PATH_PROG(SENDMAIL,sendmail,no)
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_SENDMAIL`"
+AC_PATH_PROG(SORT,sort,no)  
+ENV_PATH="$ENV_PATH:`dirname $ac_cv_path_SORT`"
+ENV_PATH="$ENV_PATH:/usr/local/bin:/usr/bin"
+
+ENV_PATH=`echo $ENV_PATH | $PERLV_PATH -e 'foreach $x(split(":",<>)){next unless (length($x));push(@F, $x),$seen{$x}=1 unless (defined $seen{$x});}print join(":",@F);'`
+AC_SUBST(ENV_PATH)
+
+AC_OUTPUT(Makefile env $RD_BIN_DATAS $RD_BIN_PROGS)
+
+# fix permissions on scripts.
+for file in $RD_BIN_PROGS; do chmod a+x $file; done
diff --git a/bin/control_rancid b/bin/control_rancid.in
index 2c367d6..2acecc7 100755
--- a/bin/control_rancid
+++ b/bin/control_rancid.in
@@ -55,10 +55,10 @@ cd $DIR
 grep -v '^#' router.db > routers.db
 cut -d: -f1,2 routers.db | sort -u > routers.all.new
 diff routers.all routers.all.new > /dev/null 2>&1; RALL=$?
-perl -F: -ane '{($F[0] =~ tr@A-Z@a-z@,print "$F[0]:$F[1]\n")
+@PERLV_PATH@ -F: -ane '{($F[0] =~ tr@A-Z@a-z@,print "$F[0]:$F[1]\n")
     if ($F[2] =~ /^down$/i);}' routers.db | sort -u > routers.down.new
 diff routers.down routers.down.new > /dev/null 2>&1; RDOWN=$?
-perl -F: -ane '{($F[0] =~ tr@A-Z@a-z@,print "$F[0]:$F[1]\n")
+@PERLV_PATH@ -F: -ane '{($F[0] =~ tr@A-Z@a-z@,print "$F[0]:$F[1]\n")
     if ($F[2] =~ /^up$/i);}' routers.db | sort -u > routers.up.new
 diff routers.up routers.up.new > /dev/null 2>&1; RUP=$?
 
@@ -68,22 +68,22 @@ then
 	if [ $RUP -ne 0 ] ; then
 	    if [ $RUP -eq 1 ] ; then
 	        echo Routers changed to up:
-	        comm -13 routers.up routers.up.new | sed -e 's/^/        /' -e 's/:.*$//'
+	        comm -13 routers.up routers.up.new | sed -e 's/^/        /'
 	        echo
 	    elif [ -s routers.up.new ] ; then
 	        echo Routers changed to up:
-	        sed -e 's/^/        /' -e 's/:.*$//' routers.up.new
+	        sed -e 's/^/        /' routers.up.new
 	        echo
 	    fi
 	fi
 	if [ $RDOWN -ne 0 ] ; then
 	    if [ $RDOWN -eq 1 ] ; then
 	        echo Routers changed to down:
-	        comm -13 routers.down routers.down.new | sed -e 's/^/        /' -e 's/:.*$//'
+	        comm -13 routers.down routers.down.new | sed -e 's/^/        /'
 	        echo
 	    elif [ -s routers.down.new ] ; then
 	        echo Routers changed to down:
-	        sed -e 's/^/        /' -e 's/:.*$//' routers.down.new
+	        sed -e 's/^/        /' routers.down.new
 	        echo
 	    fi
 	fi
@@ -91,7 +91,7 @@ then
 	WCNEW=`wc -l routers.all.new | sed -e 's/^ *\([^ ]*\) .*$/\1/'`
 	if [ $RALL -eq 1 -a $WC -gt $WCNEW ] ; then
 	    echo Deleted routers:
-	    comm -23 routers.all routers.all.new | sed -e 's/^/        /' -e 's/:.*$//'
+	    comm -23 routers.all routers.all.new | sed -e 's/^/        /'
 	fi
     ) > routers.mail
 
@@ -241,7 +241,7 @@ rm -f $DIR/routers.failed
 if [ "X$OLDTIME" = "X" ] ; then
     OLDTIME=24
 fi
-perl -F: -ane "{\$t = (stat(\$F[0]))[9]; print \`ls -ld \$F[0]\`
+@PERLV_PATH@ -F: -ane "{\$t = (stat(\$F[0]))[9]; print \`ls -ld \$F[0]\`
 	if (time() - \$t >= $OLDTIME*60*60);}" $DIR/routers.up | sort -u > $DIR/routers.failed
 if [ -s $DIR/routers.failed ]
 then
diff --git a/bin/create_cvs b/bin/create_cvs.in
index df7e56e..df7e56e 100755
--- a/bin/create_cvs
+++ b/bin/create_cvs.in
diff --git a/bin/do-diffs b/bin/do-diffs.in
index fa4acd2..4a310ef 100755
--- a/bin/do-diffs
+++ b/bin/do-diffs.in
@@ -36,7 +36,7 @@ do
 			if [ "X$LOCKTIME" = "X" ] ; then
 				LOCKTIME=4
 			fi
-			perl -e "\$t = (stat(\"$LOCKFILE\"))[9]; print \"OLD\\n\" if (time() - \$t >= $LOCKTIME*60*60);" > $TMPDIR/.$GROUP.old
+			@PERLV_PATH@ -e "\$t = (stat(\"$LOCKFILE\"))[9]; print \"OLD\\n\" if (time() - \$t >= $LOCKTIME*60*60);" > $TMPDIR/.$GROUP.old
 			if [ -s $TMPDIR/.$GROUP.old ]
 			then
 				(
diff --git a/bin/elogin b/bin/elogin.in
index ebf126e..e75efed 100755
--- a/bin/elogin
+++ b/bin/elogin.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/expect --
+#!@EXPECT_PATH@ --
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer, Erik Sherk and Pete Whiting.
diff --git a/bin/env b/bin/env.in
index 7a18204..37e9a8b 100644
--- a/bin/env
+++ b/bin/env.in
@@ -13,8 +13,9 @@ TERM=network;export TERM
 # don't take kindly to sym-links.
 #
 TMPDIR=/tmp; export TMPDIR
-BASEDIR=$HOME/rancid; export BASEDIR
-PATH=$BASEDIR/bin:/usr/local/bin:/usr/ucb:/usr/bin:/bin:/usr/lib:/usr/sbin;export PATH
+BASEDIR=@prefix@; export BASEDIR
+PATH=$BASEDIR/bin:@ENV_PATH@; export PATH
+#PATH=$BASEDIR/bin:/usr/local/bin:/usr/ucb:/usr/bin:/bin:/usr/lib:/usr/sbin;export PATH
 CVSROOT=$BASEDIR/CVS; export CVSROOT
 #
 # if NOPIPE is set, temp files will be used instead of a cmd pipe during
diff --git a/bin/erancid b/bin/erancid.in
index 2adba78..185a634 100755
--- a/bin/erancid
+++ b/bin/erancid.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ## Hacked version of rancid for ADC EZT3 series muxes. Only tested
 ## with switch software 1.50 so far - terry@tmk.com
diff --git a/bin/flogin b/bin/flogin.in
index 652e38a..0419bb6 100755
--- a/bin/flogin
+++ b/bin/flogin.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/expect --
+#!@EXPECT_PATH@ --
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer, Erik Sherk and Pete Whiting.
diff --git a/bin/francid b/bin/francid.in
index 54aae8d..6f0c2b7 100755
--- a/bin/francid
+++ b/bin/francid.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ## Amazingly hacked version of Hank's rancid - this one tries to
 ## deal with foundrys.
diff --git a/bin/jlogin b/bin/jlogin.in
index a21188c..0718321 100755
--- a/bin/jlogin
+++ b/bin/jlogin.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/expect --
+#!@EXPECT_PATH@ --
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer, Erik Sherk and Pete Whiting.
@@ -225,96 +225,119 @@ proc source_password_file { } {
 }
 
 # Log into the router.
-proc login { router user passwd prompt cyphertype identfile} {
+proc login { router user passwd prompt cmethod cyphertype identfile} {
     global spawn_id in_proc do_command do_script passphrase
     set in_proc 1
 
-    # ssh to the router & try to login with or without an identfile.
-    # We use two calls to spawn since spawn does not seem to parse
-    # spaces correctly.
-    if {$identfile != ""} {
-	if [ catch {spawn ssh -c $cyphertype -x -l $user -i $identfile $router} reason ] {
-	    send_user "Error: failed to ssh: $reason\n"
-	    exit 1
+    # try each of the connection methods in $cmethod until one is successful
+    set progs [llength $cmethod]
+    foreach prog [lrange $cmethod 0 end] {
+	if ![string compare $prog "telnet"] {
+	    if [ catch {spawn telnet $router} reason ] {
+		send_user "Error: telnet failed: $reason\n"
+		exit 1
+	    }
+	} elseif ![string compare $prog "ssh"] {
+	    # ssh to the router & try to login with or without an identfile.
+	    # We use two calls to spawn since spawn does not seem to parse
+	    # spaces correctly.
+	    if {$identfile != ""} {
+		if [ catch {spawn ssh -c $cyphertype -x -l $user -i $identfile $router} reason ] {
+		    send_user "Error: failed to ssh: $reason\n"
+		    exit 1
+		}
+	    } else {
+		if [ catch {spawn ssh -c $cyphertype -x -l $user $router} reason ] {
+		    send_user "Error: failed to ssh: $reason\n"
+		    exit 1
+		}
+	    }
+	} elseif ![string compare $prog "rsh"] {
+	    if [ catch {spawn rsh -l $user $router} reason ] {
+		send_user "Error: rsh failed: $reason\n"
+		exit 1
+	    }
+	} else {
+	    puts "ERROR: unknown connection method: $prog"
+	    return 1
 	}
-    } else {
-	if [ catch {spawn ssh -c $cyphertype -x -l $user $router} reason ] {
-	    send_user "Error: failed to ssh: $reason\n"
-	    exit 1
+	incr progs -1
+	sleep 0.3
+
+	# This helps cleanup each expect clause.
+	expect_after {
+	    timeout {
+		send_user "\nError: TIMEOUT reached\n"
+		catch {close}; wait
+		if { $in_proc} {
+	            return 1
+		} else {
+	            continue
+		}
+            } eof {
+		send_user "\nError: EOF received\n"
+		catch {close}; wait
+		if { $in_proc} {
+	            return 1
+		} else {
+	            continue
+		}
+            }
 	}
-    }
-    sleep 0.3
 
-    # This helps cleanup each expect clause.
-    expect_after {
-	timeout {
-	    send_user "\nError: TIMEOUT reached\n"
-	    catch {close}; wait
-	    if { $in_proc} {
-	        return 1
-	    } else {
-	        continue
+	# Here we get a little tricky.  There are several possibilities:
+	# the router can ask for a username and passwd and then
+	# talk to the TACACS server to authenticate you, or if the
+	# TACACS server is not working, then it will use the enable
+	# passwd.  Or, the router might not have TACACS turned on,
+	# then it will just send the passwd.
+	expect {
+	    -re "(Connection refused|Secure connection \[^\n\r]+ refused|Connectionclosed by)" {
+		catch {close}; wait
+		if !$progs {
+		   send_user "\nError: Connection Refused ($prog)\n"; return 1
+		}
 	    }
-        } eof {
-	    send_user "\nError: EOF received\n"
-	    catch {close}; wait
-	    if { $in_proc} {
-	        return 1
-	    } else {
-	        continue
+            eof { send_user "Error: Couldn't login\n"; wait; return 1
+	    } -nocase "unknown host\r\n" {
+		catch {close};
+		send_user "Error: Unknown host\n"; wait; return 1
+	    } "Host is unreachable" {
+		catch {close};
+		send_user "Error: Host Unreachable!\n"; wait; return 1
+	    } "No address associated with name" {
+		catch {close};
+		send_user "Error: Unknown host\n"; wait; return 1
 	    }
-        }
-    }
-
-    # Here we get a little tricky.  There are several possibilities:
-    # the router can ask for a username and passwd and then
-    # talk to the TACACS server to authenticate you, or if the
-    # TACACS server is not working, then it will use the enable
-    # passwd.  Or, the router might not have TACACS turned on,
-    # then it will just send the passwd.
-    expect {
-        eof { send_user "Error: Couldn't login\n"; wait; return 1 }
-	"Connection refused" {
-	    expect eof
-	    send_user "Error: Connection Refused\n"; wait; return 1
-	} "Unknown host\r\n" {
-	    expect eof
-	    send_user "Error: Unknown host\n"; wait; return 1
-	} "Host is unreachable" {
-	    expect eof
-	    send_user "Error: Host Unreachable!\n"; wait; return 1
-	} "No address associated with name" {
-	    expect eof
-	    send_user "Error: Unknown host\n"; wait; return 1
-	}
-	-re "Enter passphrase for RSA key '\[^'\]*': " {
-	    send_user "\nKey has passphrase!\n"
-	    send "$passphrase\r"
-	    exp_continue }
-	-re "Host key not found .* \(yes\/no\)\?"	{
-	    send "yes\r"
-	    send_user "Host $router added to the list of known hosts.\n"
-	    exp_continue }
-	-re "HOST IDENTIFICATION HAS CHANGED.* \(yes\/no\)\?"	{
-	    send "no\r"
-	    send_user "Error: The host key for $router has changed.  update the known_hosts file accordingly.\n"
-	    return 1 }
-	-re "(Username|^login):"	{ send "$user\r"
-	    expect {
-		eof             	{ send_user "Error: Couldn't login\n"; wait; return 1 }
-		-re "\[Pp]assword:"	{ send "$passwd\r" }
-		"$prompt"		{ set in_proc 0; return 0 }
+	    -re "Enter passphrase for RSA key '\[^'\]*': " {
+		send_user "\nKey has passphrase!\n"
+		send "$passphrase\r"
+		exp_continue }
+	    -re "Host key not found .* \(yes\/no\)\?"	{
+		send "yes\r"
+		send_user "Host $router added to the list of known hosts.\n"
+		exp_continue }
+	    -re "HOST IDENTIFICATION HAS CHANGED.* \(yes\/no\)\?"	{
+		send "no\r"
+		send_user "Error: The host key for $router has changed.  update the known_hosts file accordingly.\n"
+		return 1 }
+	    -re "(Username|\[\r\n]login):"	{ send "$user\r"
+		expect {
+		    eof             	{ send_user "Error: Couldn't login\n";
+					  wait; return 1 }
+		    -re "\[Pp]assword:"	{ send "$passwd\r" }
+		    "$prompt"		{ set in_proc 0; return 0 }
+		}
+		exp_continue
 	    }
-	    exp_continue
-	}
-	"\[Pp]assword:"	{ send "$passwd\r"
-	    expect {
+	    "\[Pp]assword:"	{ send "$passwd\r"
+		expect {
 		eof             { send_user "Error: Couldn't login\n"; wait; return 1 }
 		"$prompt"       { set in_proc 0; return 0 }
 	    }
 	    exp_continue
 	}
-	"$prompt"       { }
+	"$prompt"       { break; }
 	denied		{ send_user "Error: Check your passwd for $router\n"
 	                  if { $do_command || $do_script } {
 			      send "quit"
@@ -326,6 +349,7 @@ proc login { router user passwd prompt cyphertype identfile} {
 	                }
 	"% Bad passwords" {send_user "Error: Check your passwd for $router\n"; return 1 }
     }
+  }
     set in_proc 0
     return 0
 }
@@ -380,20 +404,6 @@ foreach router [lrange $argv $i end] {
 
     set prompt ">"
 
-    # Figure out passwords
-#    if { $do_passwd } {
-#      set pswd [find password $router]
-#      if { [llength $pswd] == 0 } {
-#        send_user "Error - no password for $router in $password_file.\n"
-#        continue
-#      }
-#      if { $do_enapasswd && !$autoenable && [llength $pswd] < 2 } {
-#	send_user "Error - no enable password for $router in $password_file."
-#        continue
-#      }
-#	set passwd [lindex $pswd 0]
-#    }
-
     # Figure out username
     if {[info exists username]} {
       # command line username
@@ -427,8 +437,12 @@ foreach router [lrange $argv $i end] {
       if { "$cyphertype" == "" } { set cyphertype "3des" }
     }
 
+    # Figure out connection method
+    set cmethod [find method $router]
+    if { "$cmethod" == "" } { set cmethod {{telnet} {ssh}} }
+
     # Login to the router
-    if {[login $router $loginname $passwd $prompt $cyphertype $identfile]} {
+    if {[login $router $loginname $passwd $prompt $cmethod $cyphertype $identfile]} {
 	continue
     }
 
diff --git a/bin/jrancid b/bin/jrancid.in
index ea158bf..633d844 100755
--- a/bin/jrancid
+++ b/bin/jrancid.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ## Amazingly hacked version of Hank's rancid - this one tries to
 ## deal with Junipers.
@@ -30,6 +30,7 @@ $file = $opt_f;
 $host = $ARGV[0];
 
 $clean_run = 0;
+$found_end = 0;
 
 # This routine is used to print out the router configuration
 sub ProcessHistory {
@@ -278,8 +279,8 @@ sub ShowChassisRoutingEngine {
     return;
 }
 
-# This routine parses "show chassis scb", "show chassis ssb", and
-# "show chassis feb".
+# This routine parses "show chassis feb" "show chassis scb", "show
+# chassis sfm detail", and "show chassis ssb".
 # Only do this routine once.
 sub ShowChassisSCB {
     print STDERR "    In ShowChassisSCB: $_" if ($debug);
@@ -355,8 +356,13 @@ sub ShowConfiguration {
     ProcessHistory("","","","# $_");
     while (<INPUT>) {
 	tr/\015//d;
-	last if(/^$prompt/);
 	next if (/^\s*$/);
+        # end of config - hopefully.  juniper does not have a reliable
+	# end-of-config tag.  appears to end with "\nPROMPT>", but not sure.
+	if(/^$prompt/) {
+	    $found_end++;
+	    last;
+	}
 
 	/^database header mismatch: / && return(-1);
 	/^version .*;\d+$/ && return(-1);
@@ -389,6 +395,7 @@ sub DoNothing {print STDOUT;}
 	"show chassis hardware"		=> "ShowChassisHardware",
 	"show chassis routing-engine"	=> "ShowChassisRoutingEngine",
 	"show chassis scb"		=> "ShowChassisSCB",
+	"show chassis sfm detail"	=> "ShowChassisSCB",
 	"show chassis ssb"		=> "ShowChassisSCB",
 	"show chassis feb"		=> "ShowChassisSCB",
 	"show system boot-messages"	=> "ShowSystemBootMessages",
@@ -403,6 +410,7 @@ sub DoNothing {print STDOUT;}
 	"show chassis hardware",
 	"show chassis routing-engine",
 	"show chassis scb",
+	"show chassis sfm detail",
 	"show chassis ssb",
 	"show chassis feb",
 	"show system boot-messages",
@@ -484,12 +492,12 @@ if (defined($ENV{NOPIPE})) {
 
 # check for completeness
 $commands = join(", ", keys(%commands));
-if (scalar(%commands) || !$clean_run) {
+if (scalar(%commands) || !$clean_run || !$found_end) {
     if (scalar(%commands)) {
 	printf(STDOUT "missed cmd(s): %s\n", join(',', keys(%commands)));
 	printf(STDERR "missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
     }
-    if (!$clean_run) {
+    if (!$clean_run || !$found_end) {
 	print STDOUT "End of run not found\n";
 	print STDERR "End of run not found\n" if ($debug);
 	system("/usr/bin/tail -1 $host.new");
diff --git a/bin/par b/bin/par.in
index a0138d8..d8b628b 100755
--- a/bin/par
+++ b/bin/par.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer and Peter Whiting.
diff --git a/bin/rancid-fe b/bin/rancid-fe.in
index e3fa735..8e5d333 100755
--- a/bin/rancid-fe
+++ b/bin/rancid-fe.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer.
diff --git a/bin/rancid b/bin/rancid.in
index 4bdde6c..d7b5fbf 100755
--- a/bin/rancid
+++ b/bin/rancid.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ##
 ## Copyright (C) 1997 by Henry Kilmer.
@@ -142,6 +142,8 @@ sub ShowVersion {
 	    $slave = " Slave:";
 	    next;
 	}
+	/^Cisco Secure PIX /i &&
+	    ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
 	/^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
 	    ProcessHistory("COMMENTS","keysort","F1",
 		"!Image:$slave Software: $1, $2\n") && next;
@@ -154,6 +156,17 @@ sub ShowVersion {
 	/^ROM: (System )?Bootstrap.*(Version.*)$/ &&
 	    ProcessHistory("COMMENTS","keysort","G1",
 		"!ROM Bootstrap: $2\n") && next;
+	if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) {
+	    ProcessHistory("COMMENTS","keysort","A1",
+		"!Chassis type: $1 - a PIX\n");
+	    ProcessHistory("COMMENTS","keysort","A2",
+		"!CPU: $3\n");
+	    ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n");
+	}
+	/^Serial Number:\s+(.*)$/ &&
+	    ProcessHistory("COMMENTS","keysort","C1", "!$_") && next;
+	/^Activation Key:\s+(.*)$/ &&
+	    ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
 	/^ROM: \d+ Bootstrap .*(Version.*)$/ &&
 	    ProcessHistory("COMMENTS","keysort","G2",
 		"!ROM Image: Bootstrap $1\n!\n") && next;
@@ -173,7 +186,7 @@ sub ShowVersion {
 	    my($proc) = $1;
 	    my($cpu) = $2;
 	    my($mem) = $3;
-	    my($deivce) = "router";
+	    my($device) = "router";
 	    if ( $1 eq "CSC") {
 		$type = "AGS";
 	    } elsif ( $1 eq "CSC4") {
@@ -264,7 +277,7 @@ sub ShowInstallActive {
 	last if (/^$prompt/);
 	next if (/^(\s*|\s*$cmd\s*)$/);
 	return(1) if /^\s*\^\s*$/;
-	return(1) if /Invalid input detected/;
+	return(1) if /(Invalid input detected|Type help or )/;
 	ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next;
     }
     return(0);
@@ -339,7 +352,7 @@ sub ShowGSR {
 
 # This routine parses "show boot"
 sub ShowBoot {
-    # Pick up boot variables if 7000/7200/7500/12000;
+    # Pick up boot variables if 7000/7200/7500/12000/2900;
     # otherwise pick up bootflash.
     print STDERR "    In ShowBoot: $_" if ($debug);
 
@@ -349,14 +362,18 @@ sub ShowBoot {
 	next if (/^(\s*|\s*$cmd\s*)$/);
 	return(1) if /^\s*\^\s*$/;
 	return(1) if /Ambiguous command/i;
-	return(1) if /Invalid input detected/;
+	return(1) if /(Invalid input detected|Type help or )/;
 	return(1) if /(Open device \S+ failed|Error opening \S+:)/;
 	next if /CONFGEN variable/;
 	if (!defined($H0)) {
 	    $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
 	}
 	if ($type !~ /^(120|7)/) {
-	    ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
+	    if ($type !~ /^2900/) {
+	        ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
+	    } else {
+	        ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
+	    }
 	} elsif (/variable/) {
 	    ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
 	}
@@ -376,7 +393,7 @@ sub ShowFlash {
 	next if (/^(\s*|\s*$cmd\s*)$/);
 	return(1) if ($type =~ /^(120|7)/);
 	return(1) if /^\s*\^\s*$/;
-	return(1) if /Invalid input detected/;
+	return(1) if /(Invalid input detected|Type help or )/;
 	ProcessHistory("FLASH","","","!Flash: $_");
     }
     ProcessHistory("","","","!\n");
@@ -396,7 +413,7 @@ sub DirSlotN {
 	next if (/^(\s*|\s*$cmd\s*)$/);
 	return(1) if ($type !~ /^(120|7|36)/);
 	return(1) if /^\s*\^\s*$/;
-	return(1) if /Invalid input detected/;
+	return(1) if /(Invalid input detected|Type help or )/;
 	return(1) if /\%Error: No such file or directory/;
 	return(1) if /No space information available/;
 	return(-1) if /\%Error calling/;
@@ -607,14 +624,20 @@ sub ShowDiag {
 	/^$/ && next;
 	if (!defined($showdiags)) {$showdiags=1; ProcessHistory("SLOT","","","!\n");}
 	s/Port Packet Over SONET/POS/;
-	if (/^\s*SLOT (\d+)\s+\(.*\): (.*)/) {
+	if (/^\s*SLOT\s+(\d+)\s+\((.*)\): (.*)/) {
 	    $slot = $1;
-	    ProcessHistory("SLOT","","","!Slot $slot: $2\n");
+	    ProcessHistory("SLOT","","","!Slot $slot: $3\n");
+	    # Here we look for boards that don't have DRAM.
+	    $board = "Other";
 	    $board = "RP" if (/Route Processor/);
 	    $board = "CLK" if (/Clock Scheduler Card/);
+	    $board = "SFC" if (/Switch Fabric Card/);
 	    next;
 	}
-	if (/^\s+PCA:\s+(.*)/){
+	if (/^\s+MAIN:\s+ type \d+,\s+(.*)/) {
+	    ProcessHistory("SLOT","","","!Slot $slot/MAIN: part $1\n") && next;
+	}
+	if (/^\s+PCA:\s+(.*)/) {
 	    local($part) = $1;
 	    $_ = <INPUT>;
 	    /^\s+HW version (\S+)\s+S\/N (\S+)/ &&
@@ -622,7 +645,6 @@ sub ShowDiag {
 		ProcessHistory("SLOT","","","!Slot $slot/PCA: hvers $1\n");
 	    next;
 	}
-
 	if (/^\s+MBUS: .*\)\s+(.*)/) {
 	    local($tmp) = "!Slot $slot/MBUS: part $1";
 	    $_ = <INPUT>;
@@ -633,7 +655,7 @@ sub ShowDiag {
 	}
 	if (/^\s+MBUS Agent Software version (.*)/) {
 	    local($sw) = $1;
-	    local($tail) = "!\n" if ($board =~ /(CLK|RP)/);
+	    local($tail) = "!\n" if ($board ne "Other");
 	    ProcessHistory("SLOT","","","!Slot $slot/MBUS: software $sw\n$tail");
 	    next;
 	}
@@ -646,7 +668,7 @@ sub ShowDiag {
 	    next;
 	}
 	# 7200 and 3600 stuff
-	if (/^(Slot)\s+(\d+):/ || /^\s+(WIC|VIC) Slot (\d):/) {
+	if (/^(Slot)\s+(\d+(\/\d+)?):/ || /^\s+(WIC|VIC) Slot (\d):/) {
 	    if ($1 eq "WIC") {
 		$WIC = "/$2";
 	    } elsif ($1 eq "VIC") {
@@ -679,12 +701,43 @@ sub ShowDiag {
 	/number\s+(\S+)\s+Part number\s+(\S+)/ &&
 	    ProcessHistory("SLOT","","","!Slot $slot$WIC: part $2, serial $1\n!\n") &&
 	    next;
+    }
+    return(0);
 }
+
+# This routine parses "show module".
+sub ShowModule {
+    print STDERR "    In ShowModule: $_" if ($debug);
+
+    my(@lines);
+    my($slot);
+
+    while (<INPUT>) {
+	tr/\015//d;
+	return if (/^\s*\^$/);
+	last if (/^$prompt/);
+	next if (/^(\s*|\s*$cmd\s*)$/);
+
+	# match slot info line, slot info then the rev info (the two are split)
+	if (/^ ?(\d+)\s+(\d+)\s+(.*)\s+(\S+)\s+(\S+)\s*$/) {
+	    $lines[$1] .= "!Slot $1: type $3, $2 ports\n!Slot $1: part $4, serial $5\n";
+	    $lines[$1] =~ s/\s+,/,/g;
+	}
+	if (/^ ?(\d+)\s+\S+\s+to\s+\S+\s+(\S+)\s+(.*)\s+(\S+)\s*$/) {
+	    $lines[$1] .= "!Slot $1: hvers $2, firmware $3, sw $4\n";
+	    $lines[$1] =~ s/\s+,/,/g;
+	}
+    }
+    foreach $slot (@lines) {
+	next if ($slot =~ /^\s*$/);
+	ProcessHistory("Module","","","$slot!\n");
+    }
+
     return(0);
 }
 
 # This routine parses "show c7200" for the 7200
-# This will create arrarys for hw info.
+# This will create arrays for hw info.
 sub ShowC7200 {
     # Skip if this is not a 7200.
     print STDERR "    In ShowC7200: $_" if ($debug);
@@ -725,10 +778,14 @@ sub ShowVTP {
 	tr/\015//d;
 	last if (/^$prompt/);
 	next if (/^(\s*|\s*$cmd\s*)$/);
+	return(1) if /^\s*\^\s*$/;
+	return(1) if /(Invalid input detected|Type help or )/;
 	return(1) if ($type !~ /^2900XL$/);
+	next if (/^Configuration last modified by/);
 	ProcessHistory("COMMENTS","keysort","I0","!VTP: $_");
     }
     ProcessHistory("COMMENTS","keysort","I0","!\n");
+    return(0);
 }
 
 # This routine processes a "write term"
@@ -738,16 +795,21 @@ sub WriteTerm {
     while (<INPUT>) {
 	tr/\015//d;
 	last if(/^$prompt/);
+	# the pager can not be disabled per-session on the PIX
+	s/^<-+ More -+>\s*//;
 	/Non-Volatile memory is in use/  && return(-1); # NvRAM is locked
 	# skip the crap
 	if (/^(##+$|Building configuration...)/i) {
 	    while (<INPUT>) {
-		next if (/^Current configuration:/i);
+		next if (/^Current configuration\s*:/i);
+		next if (/^:/);
 		next if (/^([%!].*|\s*)$/);
 		next if (/^ip add.*ipv4:/);	# band-aid for 3620 12.0S
 		last;
 	    }
-	    ProcessHistory("","","","!\nconfig-register $config_register\n");
+	    if (defined($config_register)) {
+		ProcessHistory("","","","!\nconfig-register $config_register\n");
+	    }
 	    tr/\015//d;
 	}
 	# some versions have other crap mixed in with the bits in the
@@ -760,18 +822,18 @@ sub WriteTerm {
 	/^ length /		&& next; # kill length on serial lines
 	/^ width /		&& next; # kill width on serial lines
 	/^ clockrate /		&& next; # kill clockrate on serial interfaces
-	/^enable password / &&
-	    ProcessHistory("ENABLE","","","! enable password <removed>\n") &&
+	/^(enable )?(password|passwd) / &&
+	    ProcessHistory("ENABLE","","","!$1$2 <removed>\n") &&
 	    next;
 	/^username (\S+) password /&&
-	    ProcessHistory("USER","keysort","$1","! username $1 password <removed>\n") && next;
+	    ProcessHistory("USER","keysort","$1","!username $1 password <removed>\n") && next;
 	/^\s*password / &&
 	    ProcessHistory("LINE-PASS","","","! password <removed>\n") && next;
 	/^\s*neighbor (\S*) password / &&
 	    ProcessHistory("","","","! neighbor $1 password <removed>\n") &&
 	    next;
 	/^(ip ftp password) / &&
-	    ProcessHistory("","","","! $1 <removed>\n") && next;
+	    ProcessHistory("","","","!$1 <removed>\n") && next;
 	/^( ip ospf authentication-key) / &&
 	    ProcessHistory("","","","!$1 <removed>\n") && next;
 	/^( ip ospf message-digest-key \d+ md5) / &&
@@ -851,7 +913,7 @@ sub WriteTerm {
 		    } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
 			$line .= " " . $token;
 		    } else {
-			$line = "! $line " . join(' ', ("<removed>", join(' ',@tokens)));
+			$line = "!$line " . join(' ', ("<removed>", join(' ',@tokens)));
 			last;
 		    }
 		}
@@ -863,14 +925,14 @@ sub WriteTerm {
 	}
 	if (/^(snmp-server community) (\S+)/) {
 	    if (defined($ENV{'NOCOMMSTR'})) {
-		ProcessHistory("SNMPSERVERCOMM","keysort","$_","! $1 <removed>$'") && next;
+		ProcessHistory("SNMPSERVERCOMM","keysort","$_","!$1 <removed>$'") && next;
 	    } else {
 		ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
 	    }
 	}
 	# order/prune tacacs/radius server statements
 	/^(tacacs-server|radius-server) key / &&
-	    ProcessHistory("","","","! $1 key <removed>\n") && next;
+	    ProcessHistory("","","","!$1 key <removed>\n") && next;
 	# order clns host statements
 	/^clns host \S+ (\S+)/ &&
 	    ProcessHistory("CLNS","keysort","$1","$_") && next;
@@ -878,7 +940,7 @@ sub WriteTerm {
 	/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
 	# delete ntp auth password
 	/^(ntp authentication-key \d+ md5) / &&
-	    ProcessHistory("","","","! $1 <removed>\n") && next;
+	    ProcessHistory("","","","!$1 <removed>\n") && next;
 	# order ntp peers/servers
 	if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
 	    $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
@@ -899,16 +961,17 @@ sub WriteTerm {
 
 	# system controller
 	/^syscon address (\S*) (\S*)/ &&
-	    ProcessHistory("","","","! syscon address $1 <removed>\n") &&
+	    ProcessHistory("","","","!syscon address $1 <removed>\n") &&
 	    next;
 	/^syscon password (\S*)/ &&
-	    ProcessHistory("","","","! syscon password <removed>\n") &&
+	    ProcessHistory("","","","!syscon password <removed>\n") &&
 	    next;
 
 	# catch anything that wasnt match above.
 	ProcessHistory("","","","$_");
 	# end of config
-	if (/^end$/) {
+	#if (/^end(\n\[OK])?$/) {
+	if (/^(: )?end$/) {
 	    $found_end = 1;
 	    return(1);
 	}
@@ -938,6 +1001,7 @@ sub DoNothing {print STDOUT;}
 	'show controllers cbus'	=> "ShowContCbus",
 	'show diagbus'		=> "ShowDiagbus",
 	'show diag'		=> "ShowDiag",
+	'show module'		=> "ShowModule",	# cat 6500-ios
 	'show c7200'		=> "ShowC7200",
 	'show vtp status'	=> "ShowVTP",
 	'write term'		=> "WriteTerm"
@@ -962,6 +1026,7 @@ sub DoNothing {print STDOUT;}
 	"show controllers cbus",
 	"show diagbus",
 	"show diag",
+	"show module",
 	"show c7200",
 	"show vtp status",
 	"write term"
@@ -994,7 +1059,7 @@ ProcessHistory("COMMENTS","keysort","F0","!\n");
 ProcessHistory("COMMENTS","keysort","G0","!\n");
 TOP: while(<INPUT>) {
     tr/\015//d;
-    if (/\#exit$/) {
+    if (/\#\s?exit$/) {
 	$clean_run=1;
 	last;
     }
diff --git a/bin/rename b/bin/rename.in
index 8883355..8c3a111 100755
--- a/bin/rename
+++ b/bin/rename.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 'di';
 'ig00';
 #
diff --git a/bin/rrancid b/bin/rrancid.in
index 40113aa..9d9b84f 100755
--- a/bin/rrancid
+++ b/bin/rrancid.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!@PERLV_PATH@
 ##
 ## hacked version of Hank's rancid - this one tries to deal with redbacks.
 ##