Imported from rancid-2.0.tar.gz.rancid-2.0

1 files changed, 0 insertions, 1048 deletions

diff --git a/bin/rancid b/bin/rancid
deleted file mode 100755
index 4bdde6c..0000000
--- a/bin/rancid
+++ /dev/null
@@ -1,1048 +0,0 @@
-#!/usr/local/bin/perl
-##
-##
-## Copyright (C) 1997 by Henry Kilmer.
-## All rights reserved.
-##
-## This software may be freely copied, modified and redistributed without
-## fee for non-commerical purposes provided that this copyright notice is
-## preserved intact on all copies and modified copies.
-##
-## There is no warranty or other guarantee of fitness of this software.
-## It is provided solely "as is". The author(s) disclaim(s) all
-## responsibility and liability with respect to this software's usage
-## or its effect upon hardware, computer systems, other software, or
-## anything else.
-##
-##
-#
-#  RANCID - Really Awesome New Cisco confIg Differ
-#
-# usage: rancid [-d] [-l] [-f filename | $host]
-#
-use Getopt::Std;
-getopts('dflm');
-$log = $opt_l;
-$debug = $opt_d;
-$file = $opt_f;
-$host = $ARGV[0];
-$clean_run = 0;
-$found_end = 0;
-$timeo = 90;			# clogin timeout in seconds
-
-# This routine is used to print out the router configuration
-sub ProcessHistory {
-    my($new_hist_tag,$new_command,$command_string,@string)=(@_);
-    if((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
-       && defined %history) {
-	print eval "$command \%history";
-	undef %history;
-    }
-    if (($new_hist_tag) && ($new_command) && ($command_string)) {
-	if ($history{$command_string}) {
-	    $history{$command_string} = "$history{$command_string}@string";
-	} else {
-	    $history{$command_string} = "@string";
-	}
-    } elsif (($new_hist_tag) && ($new_command)) {
-	$history{++$#history} = "@string";
-    } else {
-	print "@string";
-    }
-    $hist_tag = $new_hist_tag;
-    $command = $new_command;
-    1;
-}
-
-sub numerically { $a <=> $b; }
-
-# This is a sort routing that will sort numerically on the
-# keys of a hash as if it were a normal array.
-sub keynsort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $key (sort numerically keys(%lines)) {
-	$sorted_lines[$i] = $lines{$key};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a sort routing that will sort on the
-# keys of a hash as if it were a normal array.
-sub keysort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $key (sort keys(%lines)) {
-	$sorted_lines[$i] = $lines{$key};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a sort routing that will sort on the
-# values of a hash as if it were a normal array.
-sub valsort{
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $key (sort values %lines) {
-	$sorted_lines[$i] = $key;
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a numerical sort routing (ascending).
-sub numsort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $num (sort {$a <=> $b} keys %lines) {
-	$sorted_lines[$i] = $lines{$num};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a sort routine that will sort on the
-# ip address when the ip address is anywhere in
-# the strings.
-sub ipsort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $addr (sort sortbyipaddr keys %lines) {
-	$sorted_lines[$i] = $lines{$addr};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# These two routines will sort based upon IP addresses
-sub ipaddrval {
-    my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
-    $a[3]+256*($a[2]+256*($a[1]+256*$a[0]));
-}
-sub sortbyipaddr {
-    &ipaddrval($a) <=> &ipaddrval($b);
-}
-
-# This routine parses "show version"
-sub ShowVersion {
-    print STDERR "    In ShowVersion: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if(/^$prompt/);
-	next if(/^(\s*|\s*$cmd\s*)$/);
-	if (/^Slave in slot (\d+) is running/) {
-	    $slave = " Slave:";
-	    next;
-	}
-	/^IOS .* Software \(([A-Za-z-0-9]*)\), .*Version\s+(.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","F1",
-		"!Image:$slave Software: $1, $2\n") && next;
-	/^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","F2",
-		"!Image:$slave $1 Synced to mainline version: $2\n") && next;
-	/^Compiled (.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","F3",
-		"!Image:$slave Compiled: $1\n") && next;
-	/^ROM: (System )?Bootstrap.*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G1",
-		"!ROM Bootstrap: $2\n") && next;
-	/^ROM: \d+ Bootstrap .*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G2",
-		"!ROM Image: Bootstrap $1\n!\n") && next;
-	/^ROM: .*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
-	/^BOOTFLASH: .*(Version.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
-	/^System image file is "([^\"]*)", booted via (\S*)/ &&
-# removed the booted source due to
-# CSCdk28131: cycling info in 'sh ver'
-#	ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") &&
-	    ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
-	    next;
-	/^System image file is "([^\"]*)"$/ &&
-	    ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
-	if (/(\S+)\s+\((\S+)\)\s+processor.*with (\S+K) bytes/) {
-	    my($proc) = $1;
-	    my($cpu) = $2;
-	    my($mem) = $3;
-	    my($deivce) = "router";
-	    if ( $1 eq "CSC") {
-		$type = "AGS";
-	    } elsif ( $1 eq "CSC4") {
-		$type = "AGS+";
-	    } elsif ( $1 eq "2511" || $1 eq "2524" || $1 eq "AS2511-RJ") {
-		$type = "2500";
-	    } elsif ( $1 eq "3620" || $1 eq "3640") {
-		$type = "3600";
-	    } elsif ( $1 eq "RSP7000") {
-		$type = "7500";
-	    } elsif ( $1 =~ /RSP\d/) {
-		$type = "7500";
-	    } elsif ( $1 eq "RP1") {
-		$type = "7000";
-	    } elsif ( $1 eq "RP") {
-		$type = "7000";
-	    } elsif ( $1 =~ /720[246]/) {
-		$type = "7200";
-	    } elsif ( $1 =~ /1200[48]\/GRP/ || $1 =~ /1201[26]\/GRP/) {
-		$type = "12000";
-	    } elsif ( $1 =~ /WS-C29/) {
-		$type = "2900XL";
-		$device = "switch";
-	    } else {
-		$type = $1;
-	    }
-	    print STDERR "TYPE = $type\n" if ($debug);
-	    ProcessHistory("COMMENTS","keysort","A1",
-		"!Chassis type:$slave $proc - a $type $device\n");
-	    ProcessHistory("COMMENTS","keysort","B1",
-		"!Memory:$slave main $mem\n");
-	    ProcessHistory("COMMENTS","keysort","A3","!CPU:$slave $cpu\n");
-	    next;
-	}
-	if (/(\S+) Silicon\s*Switch Processor/) {
-	    if (!defined($C0)) {
-		$C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
-	    }
-	    ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
-	    $ssp = 1;
-	    $sspmem = $1;
-	    next;
-	}
-	/^(\d+K) bytes of multibus/ &&
-	    ProcessHistory("COMMENTS","keysort","B2",
-		"!Memory: multibus $1\n") && next;
-	/^(\d+K) bytes of non-volatile/ &&
-	    ProcessHistory("COMMENTS","keysort","B3",
-		"!Memory: nvram $1\n") && next;
-	/^(\d+K) bytes of flash memory/ &&
-	    ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
-	    next;
-	/^(\d+K) bytes of .*flash partition/ &&
-	    ProcessHistory("COMMENTS","keysort","B6",
-		"!Memory: flash partition $1\n") && next;
-	/^(\d+K) bytes of Flash internal/ &&
-	    ProcessHistory("COMMENTS","keysort","B4",
-		"!Memory: bootflash $1\n") && next;
-	if(/^(\d+K) bytes of (Flash|ATA)?.*PCMCIA .*slot ?(\d)/i) {
-	    ProcessHistory("COMMENTS","keysort","B7",
-		"!Memory: pcmcia $2 slot$3 $1\n");
-	    next;
-	}
-	if(/^WARNING/) {
-	    if (!defined($I0)) {
-		$I0=1;
-		ProcessHistory("COMMENTS","keysort","I0","!\n");
-	    }
-	    ProcessHistory("COMMENTS","keysort","I1","! $_");
-	    # The line after the WARNING is what to do about it.
-	    $_ = <INPUT>; tr/\015//d;
-	    ProcessHistory("COMMENTS","keysort","I1","!          $_");
-	}
-	if (/^Configuration register is (.*)$/) {
-	    $config_register=$1;
-	    next;
-	}
-    }
-    return(0);
-}
-
-# This routine parses "show install active"
-sub ShowInstallActive {
-    print STDERR "    In ShowInstallActive: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if /^\s*\^\s*$/;
-	return(1) if /Invalid input detected/;
-	ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next;
-    }
-    return(0);
-}
-
-# This routine parses "show env all"
-sub ShowEnv {
-    # Skip if this is not a 7500, 7200, or 7000.
-    print STDERR "    In ShowEnv: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^7/);
-	if (!defined($E0)) {
-	    $E0=1;
-	    ProcessHistory("COMMENTS","keysort","E0","!\n");
-	}
-	if (/^Arbiter type (\d), backplane type (\S+)/) {
-	    if (!defined($C0)) {
-		$C0=1; ProcessHistory("COMMENTS","keysort","C0","!\n");
-	    }
-	    ProcessHistory("COMMENTS","keysort","C1",
-		"!Enviromental Arbiter Type: $1\n");
-	    ProcessHistory("COMMENTS","keysort","A2",
-		"!Chassis type: $2 backplane\n");
-	    next;
-	}
-	/^\s*(Power .*)/ &&
-	    ProcessHistory("COMMENTS","keysort","E1","!Power: $1\n") && next;
-	/^\s*(Lower Power .*)/i &&
-	    ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
-    }
-    ProcessHistory("COMMENTS","","","!\n");
-    return(0);
-}
-
-# This routine parses "show gsr chassis-info" for the gsr
-# This will create arrarys for hw info.
-sub ShowGSR {
-    # Skip if this is not a 1200n.
-    print STDERR "    In ShowGSR: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^120/);
-	/^$/ && next;
-	/^\s+Chassis: type (\S+) Fab Ver: (\S+)/ &&
-	    ProcessHistory("COMMENTS","keysort","D0","!\n") &&
-	    ProcessHistory("COMMENTS","keysort","D1",
-				"!GSR Chassis type: $1 Fab Ver: $2\n") &&
-	    next;
-	/^\s+Chassis S\/N: (.*)$/ &&
-	    ProcessHistory("COMMENTS","keysort","D2",
-				"!GSR Chassis S/N: $1\n") &&
-	    next;
-	/^\s+PCA: (\S+)\s*rev: (\S+)\s*dev: \S+\s*HW ver: (\S+)$/ &&
-	    ProcessHistory("COMMENTS","keysort","D3",
-				"!GSR Backplane PCA: $1, rev $2, ver $3\n") &&
-	    next;
-	/^\s+Backplane S\/N: (\S+)$/ &&
-	    ProcessHistory("COMMENTS","keysort","D4",
-				"!GSR Backplane S/N: $1\n") &&
-	    next;
-    }
-    ProcessHistory("COMMENTS","","","!\n");
-    return(0);
-}
-
-# This routine parses "show boot"
-sub ShowBoot {
-    # Pick up boot variables if 7000/7200/7500/12000;
-    # otherwise pick up bootflash.
-    print STDERR "    In ShowBoot: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if /^\s*\^\s*$/;
-	return(1) if /Ambiguous command/i;
-	return(1) if /Invalid input detected/;
-	return(1) if /(Open device \S+ failed|Error opening \S+:)/;
-	next if /CONFGEN variable/;
-	if (!defined($H0)) {
-	    $H0=1; ProcessHistory("COMMENTS","keysort","H0","!\n");
-	}
-	if ($type !~ /^(120|7)/) {
-	    ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
-	} elsif (/variable/) {
-	    ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
-	}
-    }
-    ProcessHistory("COMMENTS","","","!\n");
-    return(0);
-}
-
-# This routine parses "show flash"
-sub ShowFlash {
-    # skip if this is 7000, 7200, 7500, or 12000.
-    print STDERR "    In ShowFlash: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type =~ /^(120|7)/);
-	return(1) if /^\s*\^\s*$/;
-	return(1) if /Invalid input detected/;
-	ProcessHistory("FLASH","","","!Flash: $_");
-    }
-    ProcessHistory("","","","!\n");
-    return;
-}
-
-# This routine parses "dir /all ((disk|slot)N|bootflash|nvram):"
-sub DirSlotN {
-    # Skip if this is not a 3600, 7000, 7200, 7500, or 12000.
-    print STDERR "    In DirSlotN: $_" if ($debug);
-
-    my($dev) = (/\s([^\s]+):/);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^(120|7|36)/);
-	return(1) if /^\s*\^\s*$/;
-	return(1) if /Invalid input detected/;
-	return(1) if /\%Error: No such file or directory/;
-	return(1) if /No space information available/;
-	return(-1) if /\%Error calling/;
-	return(-1) if /: device being squeezed/; # Flash is busy
-	return(1) if /(Open device \S+ failed|Error opening \S+:)/;
-	ProcessHistory("FLASH","","","!Flash: $dev: $_");
-    }
-    ProcessHistory("","","","!\n");
-    return(0);
-}
-
-# This routine parses "show controllers"
-sub ShowContAll {
-    # Skip if this is a 70[01]0, 7500, or 12000.
-    print STDERR "    In ShowContAll: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type =~ /^(120|7[05])/);
-	if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; }
-	/^(BRI unit \d)/ &&
-	    ProcessHistory("INT","","","!Interface: $1\n") && next;
-	/^LANCE unit \d, NIM/ &&
-	    ProcessHistory("INT","","","!Interface: $_") && next;
-	/^(LANCE unit \d)/ &&
-	    ProcessHistory("INT","","","!Interface: $1\n") && next;
-	/(Media Type is \S+),/ &&
-	    ProcessHistory("INT","","","!\t$1\n");
-	    if (/(M\dT:) show controller:$/) {
-		my($ctlr) = $1;
-		$_ = <INPUT>; tr/\015//d; s/ subunit \d,//;
-		ProcessHistory("INT","","","!Interface: $ctlr $_");
-	    }
-	if (/^(\S+) : show controller:$/) {
-	    my($ctlr) = $1;
-	    $_ = <INPUT>; tr/\015//d; s/ subunit \d,//;
-	    ProcessHistory("INT","","","!Interface: $ctlr: $_");
-	}
-	/^(HD unit \d), idb/ &&
-	    ProcessHistory("INT","","","!Interface: $1\n") && next;
-	/^HD unit \d, NIM/ &&
-	    ProcessHistory("INT","","","!Interface: $_") && next;
-	/^buffer size \d+  HD unit \d, (.*)/ &&
-	    ProcessHistory("INT","","","!\t$1\n") && next;
-	/^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next;
-	/^buffer size \d+  (Universal Serial: .*)/ &&
-	    ProcessHistory("INT","","","!\t$1\n") && next;
-	/^Hardware is (.*)/ &&
-	    ProcessHistory("INT","","","!Interface: $INT$1\n") && next;
-	/^(QUICC Serial unit \d),/ &&
-	    ProcessHistory("INT","","","!$1\n") && next;
-	/^QUICC Ethernet .*/ &&
-	    ProcessHistory("INT","","","!$_") && next;
-	/^DTE .*\.$/ &&
-	    ProcessHistory("INT","","","!\t$_") && next;
-	/^(cable type :.*),/ &&
-	    ProcessHistory("INT","","","!\t$1\n") && next;
-	/^(.* cable.*), received clockrate \d+$/ &&
-	    ProcessHistory("INT","","","!\t$1\n") && next;
-	/^.* cable.*$/ &&
-	    ProcessHistory("INT","","","!\t$_") && next;
-    }
-    return(0);
-}
-
-# This routine parses "show controllers cbus"
-# Some of this is printed out in ShowDiagbus.
-sub ShowContCbus {
-    # Skip if this is not a 7000 or 7500.
-    print STDERR "    In ShowContCbus: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^7[05]0/);
-	if (/^\s*slot(\d+): ([^,]+), hw (\S+), sw (\S+), ccb/) {
-	    $slot = $1;
-	    $board{$slot} = $2;
-	    $hwver{$slot} = $3;
-	    $hwucode{$slot} = $4;
-	} elsif (/^\s*(\S+) (\d+), hardware version (\S+), microcode version (\S+)/) {
-	    $slot = $2;
-	    $board{$slot} = $1;
-	    $hwver{$slot} = $3;
-	    $hwucode{$slot} = $4;
-	} elsif (/(Microcode .*)/) {
-	    $ucode{$slot} = $1;
-	} elsif (/(software loaded .*)/) {
-	    $ucode{$slot} = $1;
-	} elsif (/(\d+) Kbytes of main memory, (\d+) Kbytes cache memory/) {
-	    $hwmemd{$slot} = $1;
-	    $hwmemc{$slot} = $2;
-	} elsif (/byte buffers/) {
-	    chop;
-	    s/^\s*//;
-	    $hwbuf{$slot} = $_;
-	} elsif (/Interface (\d+) - (\S+ \S+),/) {
-	    $interface = $1;
-	    ProcessHistory("HW","","",
-		"!\n!Int $interface: in slot $slot, named $2\n"); next;
-	} elsif (/(\d+) buffer RX queue threshold, (\d+) buffer TX queue limit, buffer size (\d+)/) {
-	    ProcessHistory("HW","","","!Int $interface: rxq $1, txq $2, bufsize $3\n");
-	    next;
-	}
-    }
-    return(0);
-}
-
-# This routine parses "show diagbus"
-# This will create arrarys for hw info.
-sub ShowDiagbus {
-    # Skip if this is not a 7000, 70[01]0, or 7500.
-    print STDERR "    In ShowDiagbus: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^7[05]/);
-	if (/^\s*Slot (\d+):/i) {
-	    $slot = $1;
-	    next;
-	} elsif (/^\s*Slot (\d+) \(virtual\):/i) {
-	    $slot = $1;
-	    next;
-	} elsif (/^\s*(.*Processor.*|.*controller|.*Chassis Interface), HW rev (\S+), board revision (\S+)/i) {
-	    $board = $1;
-	    $hwver = $2;
-	    $boardrev = $3;
-	    if ($board =~ /Processor/) {
-		if ($board =~ /7000 Route\/Switch/) {
-		    $board = "RSP7000";
-		} elsif ($board =~ /Route\/Switch Processor (\d)/) {
-		    $board = "RSP$1";
-		} elsif ($board =~ /Route/) {
-		    $board = "RP";
-		} elsif ($board =~ /Silicon Switch/) {
-		    $board = "SSP";
-		} elsif ($board =~ /Switch/) {
-		    $board = "SP";
-		    $board = "SSP $sspmem" if $ssp;
-		} elsif ($board =~ /ATM/) {
-		    $board = "AIP";
-		}
-	    } elsif ($board =~ /(.*) controller/i) {
-		$board = $1;
-	    }
-	    # hwucode{$slot} defined in ShowContCbus
-	    if (defined $hwucode{$slot}) {
-		ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev ucode $hwucode{$slot}\n");
-	    } else {
-		ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev $boardrev\n");
-	    }
-	    # These are also from the ShowContCbus
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: $ucode{$slot}\n") if (defined $ucode{$slot});
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: memd $hwmemd{$slot}, cache $hwmemc{$slot}\n")
-	    if ((defined $hwmemd{$slot}) && (defined $hwmemc{$slot}));
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: $hwbuf{$slot}\n") if (defined $hwbuf{$slot});
-	    next;
-	}
-	/Serial number: (\S+)\s*Part number: (\S+)/ &&
-	    ProcessHistory("SLOT","","",
-			"!Slot $slot/$board: part $2, serial $1\n") &&
-	    next;
-	/^\s*Controller Memory Size: (.*)$/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: $1\n") &&
-	    next;
-	if (/PA Bay (\d) Information/) {
-	    $pano = $1;
-	    if ("PA" =~ /$board/) {
-		($s,$c) = split(/\//,$board);
-		$board = "$s/$c/PA $pano";
-	    } else {
-		$board =~ s/\/PA \d//;
-		$board = "$board/PA $pano";
-	    }
-	    next;
-	}
-	/\s+(.*) PA, (\d) ports?, (\S+)/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: type $3, $2 ports\n") &&
-	    next;
-	/\s+(.*) PA( \(\S+\))?, (\d) ports?/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: type $1$2, $3 ports\n") &&
-	    next;
-	/^\s*HW rev (\S+), Board revision (\S+)/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: hvers $1 rev $2\n") &&
-	    next;
-	/Serial number: (\S+)\s*Part number: (\S+)/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot/$board: part $2, serial $1\n") && next;
-    }
-    return(0);
-}
-
-# This routine parses "show diag" for the gsr, 7200, 3600, 2600.
-# This will create arrarys for hw info.
-sub ShowDiag {
-    # Skip if this is not a 12000.
-    print STDERR "    In ShowDiag: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^(120|720|36|26)/);
-	/^$/ && next;
-	if (!defined($showdiags)) {$showdiags=1; ProcessHistory("SLOT","","","!\n");}
-	s/Port Packet Over SONET/POS/;
-	if (/^\s*SLOT (\d+)\s+\(.*\): (.*)/) {
-	    $slot = $1;
-	    ProcessHistory("SLOT","","","!Slot $slot: $2\n");
-	    $board = "RP" if (/Route Processor/);
-	    $board = "CLK" if (/Clock Scheduler Card/);
-	    next;
-	}
-	if (/^\s+PCA:\s+(.*)/){
-	    local($part) = $1;
-	    $_ = <INPUT>;
-	    /^\s+HW version (\S+)\s+S\/N (\S+)/ &&
-		ProcessHistory("SLOT","","","!Slot $slot/PCA: part $part, serial $2\n") &&
-		ProcessHistory("SLOT","","","!Slot $slot/PCA: hvers $1\n");
-	    next;
-	}
-
-	if (/^\s+MBUS: .*\)\s+(.*)/) {
-	    local($tmp) = "!Slot $slot/MBUS: part $1";
-	    $_ = <INPUT>;
-	    /^\s+HW version (\S+)\s+S\/N (\S+)/ &&
-		ProcessHistory("SLOT","","","$tmp, serial $2\n") &&
-		ProcessHistory("SLOT","","","!Slot $slot/MBUS: hvers $1\n");
-	    next;
-	}
-	if (/^\s+MBUS Agent Software version (.*)/) {
-	    local($sw) = $1;
-	    local($tail) = "!\n" if ($board =~ /(CLK|RP)/);
-	    ProcessHistory("SLOT","","","!Slot $slot/MBUS: software $sw\n$tail");
-	    next;
-	}
-	if (/^\s+DRAM size: (\d+)/) {
-	    local($dram) = $1 / 1048576;
-	    $_ = <INPUT>;
-	    /^\s+FrFab SDRAM size: (\d+)/ &&
-		ProcessHistory("SLOT","","","!Slot $slot/MBUS: $dram Mbytes DRAM, "
-			   . $1 / 1024 . " Kbytes SDRAM\n!\n");
-	    next;
-	}
-	# 7200 and 3600 stuff
-	if (/^(Slot)\s+(\d+):/ || /^\s+(WIC|VIC) Slot (\d):/) {
-	    if ($1 eq "WIC") {
-		$WIC = "/$2";
-	    } elsif ($1 eq "VIC") {
-		$WIC = "/$2";
-	    } else {
-		$slot = $2;
-		undef($WIC);
-	    }
-	    $_ = <INPUT>; tr/\015//d;
-
-	    # clean up hideous 7200 format to look more like 7500 output
-	    s/Fast-ethernet on C7200 I\/O card/FE-IO/;
-	    s/ with MII or RJ45/-TX/;
-	    s/Fast-ethernet /100Base/; s/[)(]//g;
-
-	    /\s+(.*) port adapter,?\s+(\d+)\s+/i &&
-		ProcessHistory("SLOT","","","!Slot $slot: type $1, $2 ports\n");
-	    # I/O controller with no interfaces
-	    /\s+(.*)\s+port adapter\s*$/i &&
-		ProcessHistory("SLOT","","","!Slot $slot: type $1, 0 ports\n");
-	    /\s+(.*)\s+daughter card(.*)$/ &&
-		ProcessHistory("SLOT","","","!Slot $slot$WIC: type $1$2\n");
-	    /\s+(FT1)$/ &&
-		ProcessHistory("SLOT","","","!Slot $slot$WIC: type $1\n");
-	    next;
-	}
-	/revision\s+(\S+).*revision\s+(\S+)/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot$WIC: hvers $1 rev $2\n") &&
-	    next;
-	/number\s+(\S+)\s+Part number\s+(\S+)/ &&
-	    ProcessHistory("SLOT","","","!Slot $slot$WIC: part $2, serial $1\n!\n") &&
-	    next;
-}
-    return(0);
-}
-
-# This routine parses "show c7200" for the 7200
-# This will create arrarys for hw info.
-sub ShowC7200 {
-    # Skip if this is not a 7200.
-    print STDERR "    In ShowC7200: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^72/);
-	/^$/ && next;
-	if (/C7200 Midplane EEPROM:/) {
-	    $_ = <INPUT>;
-	    /revision\s+(\S+).*revision\s+(\S+)/;
-	    ProcessHistory("SLOT","","","!Slot Midplane: hvers $1 rev $2\n");
-	    $_ = <INPUT>;
-	    /number\s+(\S+)\s+Part number\s+(\S+)/;
-	    ProcessHistory("SLOT","","","!Slot Midplane: part $2, serial $1\n!\n");
-	    next;
-	}
-	if (/C720\d(VXR)? CPU EEPROM:/) {
-	    $_ = <INPUT>;
-	    /revision\s+(\S+).*revision\s+(\S+)/ &&
-		ProcessHistory("SLOT","","","!Slot CPU: hvers $1 rev $2\n");
-	    $_ = <INPUT>;
-	    /number\s+(\S+)\s+Part number\s+(\S+)/ &&
-		ProcessHistory("SLOT","","","!Slot CPU: part $2, serial $1\n!\n");
-	    next;
-	}
-    }
-    return(0);
-}
-
-# This routine parses "show vtp status"
-sub ShowVTP {
-    print STDERR "    In ShowVTP: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if (/^$prompt/);
-	next if (/^(\s*|\s*$cmd\s*)$/);
-	return(1) if ($type !~ /^2900XL$/);
-	ProcessHistory("COMMENTS","keysort","I0","!VTP: $_");
-    }
-    ProcessHistory("COMMENTS","keysort","I0","!\n");
-}
-
-# This routine processes a "write term"
-sub WriteTerm {
-    print STDERR "    In WriteTerm: $_" if ($debug);
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if(/^$prompt/);
-	/Non-Volatile memory is in use/  && return(-1); # NvRAM is locked
-	# skip the crap
-	if (/^(##+$|Building configuration...)/i) {
-	    while (<INPUT>) {
-		next if (/^Current configuration:/i);
-		next if (/^([%!].*|\s*)$/);
-		next if (/^ip add.*ipv4:/);	# band-aid for 3620 12.0S
-		last;
-	    }
-	    ProcessHistory("","","","!\nconfig-register $config_register\n");
-	    tr/\015//d;
-	}
-	# some versions have other crap mixed in with the bits in the
-	# block above
-	/^! (Last configuration|NVRAM config last)/ && next;
-
-	# Dog gone Cool matches to process the rest of the config
-	/^tftp-server flash /   && next; # kill any tftp remains
-	/^ntp clock-period /    && next; # kill ntp clock-period
-	/^ length /		&& next; # kill length on serial lines
-	/^ width /		&& next; # kill width on serial lines
-	/^ clockrate /		&& next; # kill clockrate on serial interfaces
-	/^enable password / &&
-	    ProcessHistory("ENABLE","","","! enable password <removed>\n") &&
-	    next;
-	/^username (\S+) password /&&
-	    ProcessHistory("USER","keysort","$1","! username $1 password <removed>\n") && next;
-	/^\s*password / &&
-	    ProcessHistory("LINE-PASS","","","! password <removed>\n") && next;
-	/^\s*neighbor (\S*) password / &&
-	    ProcessHistory("","","","! neighbor $1 password <removed>\n") &&
-	    next;
-	/^(ip ftp password) / &&
-	    ProcessHistory("","","","! $1 <removed>\n") && next;
-	/^( ip ospf authentication-key) / &&
-	    ProcessHistory("","","","!$1 <removed>\n") && next;
-	/^( ip ospf message-digest-key \d+ md5) / &&
-	    ProcessHistory("","","","!$1 <removed>\n") && next;
-	/fair-queue individual-limit/ && next;
-	# sort ip explicit-paths.
-	if (/^ip explicit-path name (\S+)/) {
-	    my($key) = $1;
-	    my($expath) = $_;
-	    while (<INPUT>) {
-		tr/\015//d;
-		last if (/^$prompt/);
-		last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
-		if (/^ip explicit-path name (\S+)/) {
-		    ProcessHistory("EXPATH","keysort","$key","$expath");
-		    $key = $1;
-		    $expath = $_;
-		} else  {
-		    $expath .= $_;
-		}
-	    }
-	    ProcessHistory("EXPATH","keysort","$key","$expath");
-	}
-	# sort route-maps
-	if (/^route-map (\S+)/) {
-	    my($key) = $1;
-	    my($routemap) = $_;
-	    while (<INPUT>) {
-		tr/\015//d;
-		last if (/^$prompt/ || ! /^(route-map |[ !])/);
-		if (/^route-map (\S+)/) {
-		    ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
-		    $key = $1;
-		    $routemap = $_;
-		} else  {
-		    $routemap .= $_;
-		}
-	    }
-	    ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
-	}
-	# filter out any RCS/CVS tags to avoid confusing local CVS storage
-	s/\$(Revision|Id):/ $1:/;
-	# order access-lists
-	/^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
-	    ProcessHistory("ACL $1 $2","ipsort","$3","$_") && next;
-	# order extended access-lists
-	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
-	    ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
-	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
-	    ProcessHistory("EACL $1 $2","ipsort","$3","$_") && next;
-	/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
-	    ProcessHistory("EACL $1 $2","ipsort","0.0.0.0","$_") && next;
-	# order arp lists
-	/^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
-	    ProcessHistory("ARP","ipsort","$1","$_") && next;
-	/^ip prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\d\S+)(\/.*)$/ &&
-	    ProcessHistory("PACL $1 $3","ipsort","$4","ip prefix-list $1 $3 $4$5\n")
-	    && next;
-	# order logging statements
-	/^logging (\d+\.\d+\.\d+\.\d+)/ &&
-	    ProcessHistory("LOGGING","ipsort","$1","$_") && next;
-	# order name-server statements
-	/^ip name-server (\d+\.\d+\.\d+\.\d+)/ &&
-	    ProcessHistory("NAMESERVER","ipsort","$1","$_") && next;
-	# order/prune snmp-server host statements
-	# we only prune lines of the form
-	# snmp-server host a.b.c.d <community>
-	if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
-	    if (defined($ENV{'NOCOMMSTR'})) {
-		my($ip) = $1;
-		my($line) = "snmp-server host $ip";
-		my(@tokens) = split(' ', $');
-		my($token);
-		while ($token = shift(@tokens)) {
-		    if ($token eq 'version') {
-			$line .= " " . join(' ', ($token, shift(@tokens)));
-		    } elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
-			$line .= " " . $token;
-		    } else {
-			$line = "! $line " . join(' ', ("<removed>", join(' ',@tokens)));
-			last;
-		    }
-		}
-		ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
-	    } else {
-		ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
-	    }
-	    next;
-	}
-	if (/^(snmp-server community) (\S+)/) {
-	    if (defined($ENV{'NOCOMMSTR'})) {
-		ProcessHistory("SNMPSERVERCOMM","keysort","$_","! $1 <removed>$'") && next;
-	    } else {
-		ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
-	    }
-	}
-	# order/prune tacacs/radius server statements
-	/^(tacacs-server|radius-server) key / &&
-	    ProcessHistory("","","","! $1 key <removed>\n") && next;
-	# order clns host statements
-	/^clns host \S+ (\S+)/ &&
-	    ProcessHistory("CLNS","keysort","$1","$_") && next;
-	# order alias statements
-	/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
-	# delete ntp auth password
-	/^(ntp authentication-key \d+ md5) / &&
-	    ProcessHistory("","","","! $1 <removed>\n") && next;
-	# order ntp peers/servers
-	if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
-	    $sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
-	    ProcessHistory("NTP","keysort",$sortkey,"$_");
-	    next;
-	}
-	# order ip host line statements
-	/^ip host line(\d+)/ &&
-	    ProcessHistory("IPHOST","numsort","$1","$_") && next;
-	# order ip nat source static statements
-	/^ip nat (\S+) source static (\S+)/ &&
-	    ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
-	# order atm map-list statements
-	/^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
-	    ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
-	# order ip rcmd lines
-	/^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;
-
-	# system controller
-	/^syscon address (\S*) (\S*)/ &&
-	    ProcessHistory("","","","! syscon address $1 <removed>\n") &&
-	    next;
-	/^syscon password (\S*)/ &&
-	    ProcessHistory("","","","! syscon password <removed>\n") &&
-	    next;
-
-	# catch anything that wasnt match above.
-	ProcessHistory("","","","$_");
-	# end of config
-	if (/^end$/) {
-	    $found_end = 1;
-	    return(1);
-	}
-    }
-    return(0);
-}
-
-# dummy function
-sub DoNothing {print STDOUT;}
-
-# Main
-%commands=(
-	'show version'		=> "ShowVersion",
-	'show install active'	=> "ShowInstallActive",
-	'show env all'		=> "ShowEnv",
-	'show gsr chassis'	=> "ShowGSR",
-	'show boot'		=> "ShowBoot",
-	'show bootvar'		=> "ShowBoot",
-	'show flash'		=> "ShowFlash",
-	'dir /all nvram:'	=> "DirSlotN",
-	'dir /all bootflash:'	=> "DirSlotN",
-	'dir /all slot0:'	=> "DirSlotN",
-	'dir /all disk0:'	=> "DirSlotN",
-	'dir /all slot1:'	=> "DirSlotN",
-	'dir /all disk1:'	=> "DirSlotN",
-	'show controllers'	=> "ShowContAll",
-	'show controllers cbus'	=> "ShowContCbus",
-	'show diagbus'		=> "ShowDiagbus",
-	'show diag'		=> "ShowDiag",
-	'show c7200'		=> "ShowC7200",
-	'show vtp status'	=> "ShowVTP",
-	'write term'		=> "WriteTerm"
-);
-# keys() doesnt return things in the order entered and the order of the
-# cmds is important (show version first and write term last). pita
-@commands=(
-	"show version",
-	"show install active",
-	"show env all",
-	"show gsr chassis",
-	"show boot",
-	"show bootvar",
-	"show flash",
-	"dir /all nvram:",
-	"dir /all bootflash:",
-	"dir /all slot0:",
-	"dir /all disk0:",
-	"dir /all slot1:",
-	"dir /all disk1:",
-	"show controllers",
-	"show controllers cbus",
-	"show diagbus",
-	"show diag",
-	"show c7200",
-	"show vtp status",
-	"write term"
-);
-$cisco_cmds=join(";",@commands);
-$cmds_regexp=join("|",@commands);
-
-open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
-select(OUTPUT);
-# make OUTPUT unbuffered if debugging
-if ($debug) { $| = 1; }
-
-if ($file) {
-    print STDERR "opening file $host\n" if ($debug);
-    print STDOUT "opening file $host\n" if ($log);
-    open(INPUT,"<$host") || die "open failed for $host: $!\n";
-} else {
-    print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
-    print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
-    if (defined($ENV{NOPIPE})) {
-	system "clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "clogin failed for $host: $!\n";
-	open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
-    } else {
-	open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "clogin failed for $host: $!\n";
-    }
-}
-
-ProcessHistory("COMMENTS","keysort","B0","!\n");
-ProcessHistory("COMMENTS","keysort","F0","!\n");
-ProcessHistory("COMMENTS","keysort","G0","!\n");
-TOP: while(<INPUT>) {
-    tr/\015//d;
-    if (/\#exit$/) {
-	$clean_run=1;
-	last;
-    }
-    if (/Error:/) {
-	s/^.*Error:/Error:/;
-	print STDOUT ("$host clogin error: $_");
-	print STDERR ("$host clogin error: $_") if ($debug);
-	$clean_run=0;
-	last;
-    }
-    while (/#\s*($cmds_regexp)\s*$/) {
-	$cmd = $1;
-	if (!defined($prompt)) {$prompt = ($_ =~ /^([^#]+#)/)[0]; }
-	print STDERR ("HIT COMMAND:$_") if ($debug);
-	if (! defined($commands{$cmd})) {
-	    print STDERR "found unexpected command - \"$cmd\"\n";
-	    $clean_run = 0;
-	    last TOP;
-	}
-	$rval = &{$commands{$cmd}};
-	delete($commands{$cmd});
-	if ($rval == -1) {
-	    $clean_run = 0;
-	    last TOP;
-	}
-    }
-}
-print STDOUT "Done $logincmd: $_\n" if ($log);
-# Flush History
-ProcessHistory("","","","");
-# Cleanup
-close(INPUT);
-close(OUTPUT);
-
-if (defined($ENV{NOPIPE})) {
-    unlink("$host.raw") if (! $debug);
-}
-
-# check for completeness
-if (scalar(%commands) || !$clean_run || !$found_end) {
-    if (scalar(%commands)) {
-	printf(STDOUT "missed cmd(s): %s\n", join(',', keys(%commands)));
-	printf(STDERR "missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
-    }
-    if (!$clean_run || !$found_end) {
-	print STDOUT "End of run not found\n";
-	print STDERR "End of run not found\n" if ($debug);
-	system("/usr/bin/tail -1 $host.new");
-    }
-    unlink "$host.new" if (! $debug);
-}