Imported from rancid-2.0.tar.gz.rancid-2.0

1 files changed, 0 insertions, 296 deletions

diff --git a/bin/erancid b/bin/erancid
deleted file mode 100755
index 2adba78..0000000
--- a/bin/erancid
+++ /dev/null
@@ -1,296 +0,0 @@
-#!/usr/local/bin/perl
-##
-## Hacked version of rancid for ADC EZT3 series muxes. Only tested
-## with switch software 1.50 so far - terry@tmk.com
-##
-##
-## Copyright (C) 1997 by Henry Kilmer.
-## All rights reserved.
-##
-## This software may be freely copied, modified and redistributed without
-## fee for non-commerical purposes provided that this copyright notice is
-## preserved intact on all copies and modified copies.
-##
-## There is no warranty or other guarantee of fitness of this software.
-## It is provided solely "as is". The author(s) disclaim(s) all
-## responsibility and liability with respect to this software's usage
-## or its effect upon hardware, computer systems, other software, or
-## anything else.
-##
-##
-#
-#  RANCID - Really Awesome New Cisco confIg Differ
-#
-# usage: rancid [-d] [-l] [-f filename | $host]
-#
-use Getopt::Std;
-getopts('dflm');
-$log = $opt_l;
-$debug = $opt_d;
-$file = $opt_f;
-$host = $ARGV[0];
-$clean_run = 0;
-$found_end = 0;
-$timeo = 90;			# clogin timeout in seconds
-
-# This routine is used to print out the router configuration
-sub ProcessHistory {
-    my($new_hist_tag,$new_command,$command_string,@string)=(@_);
-    if((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
-       && defined %history) {
-	print eval "$command \%history";
-	undef %history;
-    }
-    if (($new_hist_tag) && ($new_command) && ($command_string)) {
-	if ($history{$command_string}) {
-	    $history{$command_string} = "$history{$command_string}@string";
-	} else {
-	    $history{$command_string} = "@string";
-	}
-    } elsif (($new_hist_tag) && ($new_command)) {
-	$history{++$#history} = "@string";
-    } else {
-	print "@string";
-    }
-    $hist_tag = $new_hist_tag;
-    $command = $new_command;
-    1;
-}
-
-sub numerically { $a <=> $b; }
-
-# This is a sort routing that will sort numerically on the
-# keys of a hash as if it were a normal array.
-sub keynsort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $key (sort numerically keys(%lines)) {
-	$sorted_lines[$i] = $lines{$key};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a sort routing that will sort on the
-# keys of a hash as if it were a normal array.
-sub keysort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $key (sort keys(%lines)) {
-	$sorted_lines[$i] = $lines{$key};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a sort routing that will sort on the
-# values of a hash as if it were a normal array.
-sub valsort{
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $key (sort values %lines) {
-	$sorted_lines[$i] = $key;
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a numerical sort routing (ascending).
-sub numsort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $num (sort {$a <=> $b} keys %lines) {
-	$sorted_lines[$i] = $lines{$num};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# This is a sort routine that will sort on the
-# ip address when the ip address is anywhere in
-# the strings.
-sub ipsort {
-    local(%lines)=@_;
-    local($i) = 0;
-    local(@sorted_lines);
-    foreach $addr (sort sortbyipaddr keys %lines) {
-	$sorted_lines[$i] = $lines{$addr};
-	$i++;
-    }
-    @sorted_lines;
-}
-
-# These two routines will sort based upon IP addresses
-sub ipaddrval {
-    my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
-    $a[3]+256*($a[2]+256*($a[1]+256*$a[0]));
-}
-sub sortbyipaddr {
-    &ipaddrval($a) <=> &ipaddrval($b);
-}
-
-# This routine parses "show version"
-sub ShowVersion {
-    print STDERR "    In ShowVersion: $_" if ($debug);
-
-    ProcessHistory("COMMENTS","keysort","A1",
-	"- Chassis type:EZT3 - an ADC EZT3 M13 multiplexor\n");
-
-    while (<INPUT>) {
-	tr/\015//d;
-	last if(/Active\) >/);
-	next if(/^(\s*|\s*$cmd\s*)$/);
-
-	/Boot Version (\S*)/ &&
-	    ProcessHistory("COMMENTS","keysort","G1",
-		"- ROM Bootstrap: $1\n") && next;
-	/Software Version (\S*)/ &&
-	    ProcessHistory("COMMENTS","keysort","F1",
-		"- Software: $1\n") && next;
-    }
-    return(0);
-}
-
-# This routine parses "show module"
-sub ShowModule {
-    print STDERR "    In ShowModule: $_" if ($debug);
-
-    # eat the header line
-    $junk = <INPUT>;
-
-    ProcessHistory("SLOT","","","-\n");
-
-    # now just copy it verbatim to the history file
-    while (<INPUT>) {
-        tr/\015//d;
-        last if(/Active\) >/);
-	last if(/^$/);
-	chop;
-	ProcessHistory("SLOT","","","-$_\n");
-    }
-    ProcessHistory("SLOT","","","-\n");
-}
-
-# This routine processes a "write term"
-sub WriteTerm {
-    print STDERR "    In WriteTerm: $_" if ($debug);
-
-    # eat the header line
-    $junk = <INPUT>;
-
-    # now just copy it verbatim to the history file
-    while (<INPUT>) {
-        tr/\015//d;
-        last if(/Active\) >/);
-	chop;
-	if (/^\s*snmp/ && defined($ENV{'NOCOMMSTR'})) {
-	    /snmp (getcomm|setcomm|trapcomm)(\s+)(\S*)/ &&
-	    ProcessHistory("","","","-   snmp $1$2\"<removed>\"\n") && next;
-	}
-	# believe it or not, "-" is the "whole line is comment" command
-	ProcessHistory("","","","$_\n");
-    }
-    $found_end = 1;
-    return(1);
-}
-
-# dummy function
-sub DoNothing {print STDOUT;}
-
-# Main
-%commands=(
-	'version'		=> "ShowVersion",
-	'equipment'		=> "ShowModule",
-	'config'		=> "WriteTerm",
-);
-# keys() doesnt return things in the order entered and the order of the
-# cmds is important (show version first and write term last). pita
-@commands=(
-	"version",
-	"equipment",
-	"config",
-);
-$cisco_cmds=join(";",@commands);
-$cmds_regexp=join("|",@commands);
-
-open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
-select(OUTPUT);
-# make OUTPUT unbuffered if debugging
-if ($debug) { $| = 1; }
-
-if ($file) {
-    print STDERR "opening file $host\n" if ($debug);
-    print STDOUT "opening file $host\n" if ($log);
-    open(INPUT,"<$host") || die "open failed for $host: $!\n";
-} else {
-    print STDERR "executing elogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($debug);
-    print STDOUT "executing elogin -t $timeo -c\"$cisco_cmds\" $host\n" if ($log);
-    if (defined($ENV{NOPIPE})) {
-	system "elogin -t $timeo -c \"$cisco_cmds\" $host </dev/null > $host.raw 2>&1" || die "elogin failed for $host: $!\n";
-	open(INPUT, "< $host.raw") || die "elogin failed for $host: $!\n";
-    } else {
-	open(INPUT,"elogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") || die "elogin failed for $host: $!\n";
-    }
-}
-
-ProcessHistory("COMMENTS","keysort","B0","-\n");
-ProcessHistory("COMMENTS","keysort","F0","-\n");
-ProcessHistory("COMMENTS","keysort","G0","-\n");
-while(<INPUT>) {
-    tr/\015//d;
-    if (/Logging out$/) {
-	$clean_run=1;
-	last;
-    }
-    if (/Error:/) {
-	s/^.*Error:/Error:/;
-	print STDOUT ("$host elogin error: $_");
-	print STDERR ("$host elogin error: $_") if ($debug);
-	$clean_run=0;
-	last;
-    }
-    while (/Active\) >\s*($cmds_regexp)\s*$/) {
-	$cmd = $1;
-	if (!defined($prompt)) {$prompt = ($_ =~ /^([^#]+#)/)[0]; }
-	print STDERR ("HIT COMMAND:$_") if ($debug);
-	if (! defined($commands{$cmd})) {
-	    print STDERR "found unexpected command - \"$cmd\"\n";
-	    $clean_run = 0;
-	    last;
-	}
-	$rval = &{$commands{$cmd}};
-	delete($commands{$cmd});
-	if ($rval == -1) {
-	    $clean_run = 0;
-	    last;
-	}
-    }
-}
-print STDOUT "Done $logincmd: $_\n" if ($log);
-# Flush History
-ProcessHistory("","","","");
-# Cleanup
-close(INPUT);
-close(OUTPUT);
-
-if (defined($ENV{NOPIPE})) {
-    unlink("$host.raw") if (! $debug);
-}
-
-# check for completeness
-if (scalar(%commands) || !$clean_run || !$found_end) {
-    if (scalar(%commands)) {
-	printf(STDOUT "missed cmd(s): %s\n", join(',', keys(%commands)));
-	printf(STDERR "missed cmd(s): %s\n", join(',', keys(%commands))) if ($debug);
-    }
-    if (!$clean_run || !$found_end) {
-	print STDOUT "End of run not found\n";
-	print STDERR "End of run not found\n" if ($debug);
-	system("/usr/bin/tail -1 $host.new");
-    }
-    unlink "$host.new" if (! $debug);
-}