summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/be2iscsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] be2iscsi: fix dma free size mismatch regressionMike Christie2012-05-301-3/+2
| | | | | | | | | | | | | | This patch should go into 3.5 fixes. The bug was added in the patches for the 3.5 feature window. As you can see from the patch I made a mistake. During development I switched from passing a struct to the size of the struct, but left the sizeof. This results in us allocating 4 bytes (sizeof(int)) but then calling pci_free_consistent with the size of the struct. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Get Port State and Speed of the AdapterJohn Soni Jose2012-04-253-0/+140
| | | | | | | | | | Implement ISCSI_HOST_PARAM_PORT_STATE and ISCSI_HOST_PARAM_PORT_SPEED to get the Adapter port state and port name Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: adding functionality to change network settings using iscsiadmMike Christie2012-04-257-106/+858
| | | | | | | | | This patch allows iscsiadm to set/ delete static IP and enable /disable DHCP. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Adding bsg interface for be2iscsiJayamohan Kallickal2012-04-254-1/+162
| | | | | | Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Get Initiator Name for the iSCSI_HostJohn Soni Jose2012-04-254-0/+90
| | | | | | | | | Implement the ISCSI_HOST_PARAM_INITIATOR_NAME for .get_host_param Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Return async handle of unknown opcode to free list.Jayamohan Kallickal2012-04-251-2/+1
| | | | | | | | | | The async handle corresponding to unknown Opcode was not freed earlier. This code does the fix for that. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Check ASYNC PDU Handle corresponds to HDR/DATA HandleJayamohan Kallickal2012-04-251-6/+2
| | | | | | | | | | | | | | For each ASYNC PDU received there is an HDR and DATA handle for it. There will be only 1 HDR ASYNC Handle, but DATA Handle can be more than 1 for each ASYNC PDU received. Checking if the ASYNC Handle correspongs to HDR or DATA while returning the Handle to the free list. hwi_free_async_msg just return the handles to the free list. No return values are needed so changing the return type to void. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Bump the driver VersionJayamohan Kallickal2012-04-252-1/+2
| | | | | | | Signed-off-by: Minh Tran <MinhDuc.Tran@Emulex.Com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Update external Branding to EmulexJayamohan Kallickal2012-04-253-5/+5
| | | | | | | | | | Change MODULE_AUTHOR, driver name and other external print strings from Serverengines to Emulex. Signed-off-by: Minh Tran <MinhDuc.Tran@Emulex.Com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix the function return values.Jayamohan Kallickal2012-04-251-4/+3
| | | | | | | Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Code cleanup, removing the goto statementJayamohan Kallickal2012-04-251-7/+4
| | | | | | | Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix double free of MCCQ info memory.Jayamohan Kallickal2012-04-251-1/+3
| | | | | | | | | | | In case of MCC_Q creation failed, the MCCQ info memory is freed from be_mcc_queues_destroy and be_mcc_queues_create. This caused kernel to panic because of double free. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Set num_cpu = 1 if pci_enable_msix failsJayamohan Kallickal2012-04-251-1/+4
| | | | | | Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix typo function name mismatchJayamohan Kallickal2012-04-251-1/+1
| | | | | | | Signed-off-by: Minh Tran <MinhDuc.Tran@Emulex.Com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Freeing of WRB and SGL Handle in cleanup taskMike Christie2012-04-251-45/+62
| | | | | | | | | | | | | | | The WRB and SGL Handle allocated for Login task were not freed back to the pool after the login process was done. This code releases the WRB and SGL Handle after the login process. v2: - Fix up locking so bh calls are not done when not needed. - Make beiscsi_cleanup_task static. Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> [various fixes] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: WRB Initialization and Failure code path changeJayamohan Kallickal2012-04-252-53/+49
| | | | | | | | | | | Removing code duplication during the WRB_Handle and WRB initialization. Added memory allocation failure handling code during WRB initialization. Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix in ASYNC PDU stitching logic.Jayamohan Kallickal2012-04-251-2/+2
| | | | | | | | | | The buffer length passed for processing the ASYNC PDU was not proper. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix in the Asynchronous Code PathJayamohan Kallickal2012-04-252-46/+47
| | | | | | | | | | | | Set the ASYNC PDU Handle pBuffer for Data ring with the VA/PA of the allocated memory for it. To get the correct ASYNC PDY Handle iterate the list and compare the PA set during initialization with the passed PHY Address. The buffer_size and num_enteries are common for HDR and Data ring Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Remove unused OFFSET_IN_PAGE() macroRoland Dreier2012-04-231-4/+0
| | | | | | | Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge tag 'scsi-misc' of ↵Linus Torvalds2012-01-101-2/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates for post 3.2 merge window * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (67 commits) [SCSI] lpfc 8.3.28: Update driver version to 8.3.28 [SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adapters [SCSI] lpfc 8.3.28: Critical Miscellaneous fixes [SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes [SCSI] lpfc 8.3.28: Add support for ABTS failure handling [SCSI] lpfc 8.3.28: SLI fixes and added SLI4 support [SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfaces [SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from _scsih_probe [SCSI] mac_scsi: Remove obsolete IRQ_FLG_* users [SCSI] qla4xxx: Update driver version to 5.02.00-k10 [SCSI] qla4xxx: check for FW alive before calling chip_reset [SCSI] qla4xxx: Fix qla4xxx_dump_buffer to dump buffer correctly [SCSI] qla4xxx: Fix the IDC locking mechanism [SCSI] qla4xxx: Wait for disable_acb before doing set_acb [SCSI] qla4xxx: Don't recover adapter if device state is FAILED [SCSI] qla4xxx: fix call trace on rmmod with ql4xdontresethba=1 [SCSI] qla4xxx: Fix CPU lockups when ql4xdontresethba set [SCSI] qla4xxx: Perform context resets in case of context failures. [SCSI] iscsi class: export pid of process that created [SCSI] mpt2sas: Remove unused duplicate diag_buffer_enable param ...
| * [SCSI] be2iscsi: cleanup a min_t() callDan Carpenter2011-12-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "sense_len" was declared as int type but actually it only stores a u16 value that comes from hardware. The cast to u16 in min_t() confuses static analysis because it truncates the int to u16 so I've fixed the declaration to reflect that "sense_len" is just a u16. Also there was a call to cpu_to_be16() which I've changed to be16_to_cpu(). The functions are equivalent, but obviously the hardware is big endian and we're doing the min_t() comparison on CPU endian values. This whole patch is just a cleanup and doesn't affect how the code works. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Jayamohan Kallickal <Jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | switch ->is_visible() to returning umode_tAl Viro2012-01-033-8/+8
|/ | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* [SCSI] be2iscsi: Move driver Version to 4.1.239.0Jayamohan Kallickal2011-10-161-1/+1
| | | | | | Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: memset wrb for ring createJayamohan Kallickal2011-10-161-0/+1
| | | | | | | | | This patch fixes a situation when wrb was not being memset to zero before being used Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix for case where task->sc was cleanedup earlierJayamohan Kallickal2011-10-161-0/+5
| | | | | | | | | | | This patch fixes a bug where the task->sc was cleaned up earlier on a different thread, possibly abort, and the completion comes later. This was causing a crash which has been reported in multiple places Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix for wrong dmsg setting in wrbJayamohan Kallickal2011-10-161-2/+2
| | | | | | | | | | | | This patch fixes wrong dmsg setting when we send out wrb. If the ttt is not ISCSI_RESERVED_TAG then we should be setting dmsg=1 so that the completion is done without waiting for a iscsi level response from the target Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fix for kdump failureJayamohan Kallickal2011-10-163-1/+22
| | | | | | | | | | | | | | This patch fixes the Kdump failure reported by Redhat wich was caused by be2iscsi resetting the Chip when be2iscsi detects it is in crashdump mode. If be2net was loaded before be2iscsi then this leaves be2net driver hanging on to resources that the chip stopped recognising after the reset. This patch replaces chip reset with Function reset so that only the particular function and not the whole chip is affected Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Add pci_disable deviceJayamohan Kallickal2011-08-291-0/+2
| | | | | | | | | This patch adds call to pci_disable_device during rmmod and shutdown. The lack of this call was causing hang in insmod - rmmod loop test Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Adding a shutdown RoutineJayamohan Kallickal2011-08-291-8/+30
| | | | | | | | | | | This patch adds a shutdown routine. It fixes a bug where when be2net and be2iscsi are both used be2iscsi was not cleaning up its resources properly causing be2net to fail to get loaded when the system is rebooted. Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: Fixing the /proc/interrupts problem V3Jayamohan Kallickal2011-08-292-8/+29
| | | | | | | | | | | | | | | | | | | | | | | | | Fix be2iscsi driver to use a separate pointer for each irq action->name field and avoid display corruption in /proc/interrupts. The be2iscsi driver was using a single static array in a function for the irq action->name field. This results in garbage output from /proc/interrupts The pointer for action->name is garbage and scribbles the output on the screen. This patch fixes the problem: 156: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PCI-MSI-X beiscsi_msix_0017 This patch is based on Prarit's patch here: http://www.spinics.net/lists/linux-scsi/msg52325.html but I have fixed up the failure paths and removed redundant check for !i suggested by Eike. Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] be2iscsi: remove host and session castsMike Christie2011-08-271-4/+3
| | | | | | | | | | | iscsi_session_to_shost is a macro around dev_to_shost which returns a Scsi_Host so there is no need to cast. iscsi_session_to_shost is a macro around shost_priv which returns a void pointer so no need to cast. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] iscsi class: sysfs group is_visible callout for iscsi host attrsMike Christie2011-08-272-2/+9
| | | | | | | | | | | The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's host attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] iscsi class: sysfs group is_visible callout for session attrsMike Christie2011-08-272-15/+19
| | | | | | | | | | | The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's session attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] iscsi cls: sysfs group is_visible callout for conn attrsMike Christie2011-08-273-10/+29
| | | | | | | | | | | The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and drivers to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge branch 'for-next' of ↵Linus Torvalds2011-07-271-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage iscsi-target: Add iSCSI fabric support for target v4.1 iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h iscsi: Use struct scsi_lun in iscsi structs instead of u8[8] iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi
| * iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]Andy Grover2011-07-251-3/+2
| | | | | | | | | | | | | | | | | | | | struct scsi_lun is also just a struct with an array of 8 octets (64 bits) but using it instead in iscsi structs lets us call scsilun_to_int without a cast, and also lets us copy it using assignment, instead of memcpy(). Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsiNicholas Bellinger2011-07-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames the following iscsi_proto.h structures to avoid namespace issues with drivers/target/iscsi/iscsi_target_core.h: *) struct iscsi_cmd -> struct iscsi_scsi_req *) struct iscsi_cmd_rsp -> struct iscsi_scsi_rsp *) struct iscsi_login -> struct iscsi_login_req This patch includes useful ISCSI_FLAG_LOGIN_[CURRENT,NEXT]_STAGE*, and ISCSI_FLAG_SNACK_TYPE_* definitions used by iscsi_target_mod, and fixes the incorrect definition of struct iscsi_snack to following RFC-3720 Section 10.16. SNACK Request. Also, this patch updates libiscsi, iSER, be2iscsi, and bn2xi to use the updated structure definitions in a handful of locations. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
* | [SCSI] iscsi_ibft, be2iscsi, iscsi_boot: fix boot kobj data lifetime managementMike Christie2011-06-291-91/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | be2iscsi passes the boot functions its phba object which is allocated in the shost, but iscsi_ibft passes in a object allocated for each item to display. The problem is that iscsi_boot_sysfs was managing the lifetime of the object passed in and doing a kfree on release. This causes a double free for be2iscsi which frees the shost in its pci_remove. This patch fixes the problem by adding a release callback which the drivers can call kfree or a put() type of function (needed for be2iscsi which will do a get/put on the shost). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] iscsi_boot_sysfs: have this module check for null on destructionMike Christie2011-06-291-4/+2
| | | | | | | | | | | | | | | | This moves the check for NULL boot_sets to the iscsi_boot_sysfs module instead of having the drivers do it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]Andy Grover2011-06-291-3/+2
|/ | | | | | | | | | struct scsi_lun is also just a struct with an array of 8 octets (64 bits) but using it instead in iscsi structs lets us call scsilun_to_int without a cast, and also lets us copy it using assignment, instead of memcpy(). Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-05-231-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
| * Merge branch 'master' into for-nextJiri Kosina2011-04-261-9/+9
| |\ | | | | | | | | | | | | Fast-forwarded to current state of Linus' tree as there are patches to be applied for files that didn't exist on the old branch.
| * | treewide: remove extra semicolonsJustin P. Mattock2011-04-101-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | [SCSI] be2iscsi: update versionJayamohan Kallickal2011-05-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Bump version. Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] be2iscsi: fix chip cleanupJayamohan Kallickal2011-05-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug where proper queue id's were not passed to chip for cleanup. Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] be2iscsi: fix boot hang due to interrupts not getting rearmedJayamohan Kallickal2011-05-011-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug where the interrupts were not rearmed if the Interrupt Mask was enabled. This patch checks for Interrupt mask enabled and still rearms interrupt generation even if the Interrupt mask was enabled Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] be2iscsi: Fix for proper setting of FWJayamohan Kallickal2011-04-151-4/+9
| | | | | | | | | | | | | | | | | | | | | There was a bug in setting up type and dmsg for FW Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] be2iscsi: check boot_kset is created before destroying itJayamohan Kallickal2011-04-151-2/+4
| | | | | | | | | | | | | | | Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] be2iscsi: Set a timeout to FWJayamohan Kallickal2011-04-151-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit (git 2.34.1) at 2024-06-24 09:41:43 +0000