diff options
Diffstat (limited to 'include/linux/ssb/ssb_regs.h')
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 61 |
1 files changed, 57 insertions, 4 deletions
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 40b1ef8595ee..a0525019e1d1 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -228,6 +228,7 @@ #define SSB_SPROM1_AGAIN_BG_SHIFT 0 #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ #define SSB_SPROM1_AGAIN_A_SHIFT 8 +#define SSB_SPROM1_CCODE 0x0076 /* SPROM Revision 2 (inherits from rev 1) */ #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ @@ -267,6 +268,7 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ +#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ @@ -389,6 +391,11 @@ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM8_GPIOB_P3_SHIFT 8 +#define SSB_SPROM8_LEDDC 0x009A +#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ +#define SSB_SPROM8_LEDDC_ON_SHIFT 8 +#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ +#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 @@ -404,6 +411,13 @@ #define SSB_SPROM8_AGAIN2_SHIFT 0 #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ #define SSB_SPROM8_AGAIN3_SHIFT 8 +#define SSB_SPROM8_TXRXC 0x00A2 +#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f +#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 +#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 +#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 +#define SSB_SPROM8_TXRXC_SWITCH 0xff00 +#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ #define SSB_SPROM8_RSSISMF2G 0x000F #define SSB_SPROM8_RSSISMC2G 0x00F0 @@ -430,6 +444,7 @@ #define SSB_SPROM8_TRI5GH_SHIFT 8 #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO2G_SHIFT 0 #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 #define SSB_SPROM8_FEM2G 0x00AE @@ -445,10 +460,38 @@ #define SSB_SROM8_FEM_ANTSWLUT 0xF800 #define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 #define SSB_SPROM8_THERMAL 0x00B2 -#define SSB_SPROM8_MPWR_RAWTS 0x00B4 -#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 -#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 -#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA +#define SSB_SPROM8_THERMAL_OFFSET 0x00ff +#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 +#define SSB_SPROM8_THERMAL_TRESH 0xff00 +#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 +/* Temp sense related entries */ +#define SSB_SPROM8_RAWTS 0x00B4 +#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff +#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 +#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 +#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 +#define SSB_SPROM8_OPT_CORRX 0x00B6 +#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff +#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 +#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 +#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 +#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 +#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 +/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ +#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f +#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 +#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 +#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 +#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 +#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 +#define SSB_SPROM8_TEMPDELTA 0x00BA +#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff +#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 +#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 +#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 +#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 +#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 /* There are 4 blocks with power info sharing the same layout */ #define SSB_SROM8_PWR_INFO_CORE0 0x00C0 @@ -513,6 +556,16 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ +#define SSB_SPROM8_2G_MCSPO 0x0152 +#define SSB_SPROM8_5G_MCSPO 0x0162 +#define SSB_SPROM8_5GL_MCSPO 0x0172 +#define SSB_SPROM8_5GH_MCSPO 0x0182 + +#define SSB_SPROM8_CDDPO 0x0192 +#define SSB_SPROM8_STBCPO 0x0194 +#define SSB_SPROM8_BW40PO 0x0196 +#define SSB_SPROM8_BWDUPPO 0x0198 + /* Values for boardflags_lo read from SPROM */ #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ |