summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-wdm.c7
-rw-r--r--drivers/usb/core/hcd-pci.c9
-rw-r--r--drivers/usb/gadget/dummy_hcd.c1
-rw-r--r--drivers/usb/gadget/f_mass_storage.c2
-rw-r--r--drivers/usb/gadget/file_storage.c2
-rw-r--r--drivers/usb/gadget/udc-core.c4
-rw-r--r--drivers/usb/gadget/uvc.h2
-rw-r--r--drivers/usb/gadget/uvc_v4l2.c2
-rw-r--r--drivers/usb/host/ehci-pci.c8
-rw-r--r--drivers/usb/host/ehci-tegra.c376
-rw-r--r--drivers/usb/musb/davinci.c3
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/otg/gpio_vbus.c15
13 files changed, 240 insertions, 193 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c6f6560d436c..0bb2b3248dad 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
spin_lock(&desc->iuspin);
desc->werr = urb->status;
spin_unlock(&desc->iuspin);
- clear_bit(WDM_IN_USE, &desc->flags);
kfree(desc->outbuf);
+ desc->outbuf = NULL;
+ clear_bit(WDM_IN_USE, &desc->flags);
wake_up(&desc->wait);
}
@@ -338,7 +339,7 @@ static ssize_t wdm_write
if (we < 0)
return -EIO;
- desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+ buf = kmalloc(count, GFP_KERNEL);
if (!buf) {
rv = -ENOMEM;
goto outnl;
@@ -406,10 +407,12 @@ static ssize_t wdm_write
req->wIndex = desc->inum;
req->wLength = cpu_to_le16(count);
set_bit(WDM_IN_USE, &desc->flags);
+ desc->outbuf = buf;
rv = usb_submit_urb(desc->command, GFP_KERNEL);
if (rv < 0) {
kfree(buf);
+ desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
} else {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a48e732..57ed9e400c06 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
pci_save_state(pci_dev);
+ /*
+ * Some systems crash if an EHCI controller is in D3 during
+ * a sleep transition. We have to leave such controllers in D0.
+ */
+ if (hcd->broken_pci_sleep) {
+ dev_dbg(dev, "Staying in PCI D0\n");
+ return retval;
+ }
+
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a6dfd2164166..170cbe89d9f8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
dum->driver = NULL;
- dummy_pullup(&dum->gadget, 0);
return 0;
}
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a371e966425f..cb8c162cae5a 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2189,7 +2189,7 @@ unknown_cmnd:
common->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
reply = check_command(common, common->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+ DATA_DIR_UNKNOWN, ~0, 0, unknown);
if (reply == 0) {
common->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4fac56927741..a896d73f7a93 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
fsg->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
if ((reply = check_command(fsg, fsg->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
fsg->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
}
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 2fa9865babed..e5e44f8cde9a 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
if (udc_is_newstyle(udc)) {
udc->driver->disconnect(udc->gadget);
- udc->driver->unbind(udc->gadget);
usb_gadget_disconnect(udc->gadget);
+ udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
usb_gadget_stop(udc->gadget, udc->driver);
@@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
} else if (sysfs_streq(buf, "disconnect")) {
+ usb_gadget_disconnect(udc->gadget);
if (udc_is_newstyle(udc))
usb_gadget_udc_stop(udc->gadget, udc->driver);
- usb_gadget_disconnect(udc->gadget);
} else {
dev_err(dev, "unsupported command '%s'\n", buf);
return -EINVAL;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index bc78c606c12b..ca4e03a1c73a 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -28,7 +28,7 @@
struct uvc_request_data
{
- unsigned int length;
+ __s32 length;
__u8 data[60];
};
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index f6e083b50191..54d7ca559cb2 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);
- req->length = min(uvc->event_length, data->length);
+ req->length = min_t(unsigned int, uvc->event_length, data->length);
req->zero = data->length < uvc->event_length;
req->dma = DMA_ADDR_INVALID;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb7241d6ef..fe8dc069164e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
hcd->has_tt = 1;
tdi_reset(ehci);
}
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+ /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+ if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+ ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+ hcd->broken_pci_sleep = 1;
+ device_set_wakeup_capable(&pdev->dev, false);
+ }
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 86183366647f..f214a80cdee2 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
@@ -37,9 +38,7 @@ struct tegra_ehci_hcd {
struct clk *emc_clk;
struct usb_phy *transceiver;
int host_resumed;
- int bus_suspended;
int port_resuming;
- int power_down_on_bus_suspend;
enum tegra_usb_phy_port_speed port_speed;
};
@@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd)
up_write(&ehci_cf_port_reset_rwsem);
}
-static int tegra_usb_suspend(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- struct ehci_regs __iomem *hw = tegra->ehci->regs;
- unsigned long flags;
-
- spin_lock_irqsave(&tegra->ehci->lock, flags);
-
- tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
- ehci_halt(tegra->ehci);
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- spin_unlock_irqrestore(&tegra->ehci->lock, flags);
-
- tegra_ehci_power_down(hcd);
- return 0;
-}
-
-static int tegra_usb_resume(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- struct ehci_regs __iomem *hw = ehci->regs;
- unsigned long val;
-
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- tegra_ehci_power_up(hcd);
-
- if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
- /* Wait for the phy to detect new devices
- * before we restart the controller */
- msleep(10);
- goto restart;
- }
-
- /* Force the phy to keep data lines in suspend state */
- tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
-
- /* Enable host mode */
- tdi_reset(ehci);
-
- /* Enable Port Power */
- val = readl(&hw->port_status[0]);
- val |= PORT_POWER;
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Check if the phy resume from LP0. When the phy resume from LP0
- * USB register will be reset. */
- if (!readl(&hw->async_next)) {
- /* Program the field PTC based on the saved speed mode */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
- val |= PORT_TEST_FORCE;
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
- val |= PORT_TEST(6);
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
- val |= PORT_TEST(7);
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Disable test mode by setting PTC field to NORMAL_OP */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- writel(val, &hw->port_status[0]);
- udelay(10);
- }
-
- /* Poll until CCS is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
- PORT_CONNECT, 2000)) {
- pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
- goto restart;
- }
-
- /* Poll until PE is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_PE,
- PORT_PE, 2000)) {
- pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
- goto restart;
- }
-
- /* Clear the PCI status, to avoid an interrupt taken upon resume */
- val = readl(&hw->status);
- val |= STS_PCD;
- writel(val, &hw->status);
-
- /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
- val = readl(&hw->port_status[0]);
- if ((val & PORT_POWER) && (val & PORT_PE)) {
- val |= PORT_SUSPEND;
- writel(val, &hw->port_status[0]);
-
- /* Wait until port suspend completes */
- if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
- PORT_SUSPEND, 1000)) {
- pr_err("%s: timeout waiting for PORT_SUSPEND\n",
- __func__);
- goto restart;
- }
- }
-
- tegra_ehci_phy_restore_end(tegra->phy);
- return 0;
-
-restart:
- if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
- tegra_ehci_phy_restore_end(tegra->phy);
-
- tegra_ehci_restart(hcd);
- return 0;
-}
-
static void tegra_ehci_shutdown(struct usb_hcd *hcd)
{
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
@@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
return retval;
}
-#ifdef CONFIG_PM
-static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- int error_status = 0;
-
- error_status = ehci_bus_suspend(hcd);
- if (!error_status && tegra->power_down_on_bus_suspend) {
- tegra_usb_suspend(hcd);
- tegra->bus_suspended = 1;
- }
-
- return error_status;
-}
-
-static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
- if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
- tegra_usb_resume(hcd);
- tegra->bus_suspended = 0;
- }
-
- tegra_usb_phy_preresume(tegra->phy);
- tegra->port_resuming = 1;
- return ehci_bus_resume(hcd);
-}
-#endif
-
struct temp_buffer {
void *kmalloc_ptr;
void *old_xfer_buffer;
@@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
.hub_control = tegra_ehci_hub_control,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
#ifdef CONFIG_PM
- .bus_suspend = tegra_ehci_bus_suspend,
- .bus_resume = tegra_ehci_bus_resume,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
@@ -603,11 +458,187 @@ static int setup_vbus_gpio(struct platform_device *pdev)
dev_err(&pdev->dev, "can't enable vbus\n");
return err;
}
- gpio_set_value(gpio, 1);
return err;
}
+#ifdef CONFIG_PM
+
+static int controller_suspend(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct ehci_hcd *ehci = tegra->ehci;
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long flags;
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(10);
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+ ehci_halt(ehci);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ tegra_ehci_power_down(hcd);
+ return 0;
+}
+
+static int controller_resume(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct ehci_hcd *ehci = tegra->ehci;
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long val;
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ tegra_ehci_power_up(hcd);
+
+ if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+ /* Wait for the phy to detect new devices
+ * before we restart the controller */
+ msleep(10);
+ goto restart;
+ }
+
+ /* Force the phy to keep data lines in suspend state */
+ tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+ /* Enable host mode */
+ tdi_reset(ehci);
+
+ /* Enable Port Power */
+ val = readl(&hw->port_status[0]);
+ val |= PORT_POWER;
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Check if the phy resume from LP0. When the phy resume from LP0
+ * USB register will be reset. */
+ if (!readl(&hw->async_next)) {
+ /* Program the field PTC based on the saved speed mode */
+ val = readl(&hw->port_status[0]);
+ val &= ~PORT_TEST(~0);
+ if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ val |= PORT_TEST_FORCE;
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+ val |= PORT_TEST(6);
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= PORT_TEST(7);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Disable test mode by setting PTC field to NORMAL_OP */
+ val = readl(&hw->port_status[0]);
+ val &= ~PORT_TEST(~0);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+ }
+
+ /* Poll until CCS is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+ PORT_CONNECT, 2000)) {
+ pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+ goto restart;
+ }
+
+ /* Poll until PE is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_PE,
+ PORT_PE, 2000)) {
+ pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+ goto restart;
+ }
+
+ /* Clear the PCI status, to avoid an interrupt taken upon resume */
+ val = readl(&hw->status);
+ val |= STS_PCD;
+ writel(val, &hw->status);
+
+ /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+ val = readl(&hw->port_status[0]);
+ if ((val & PORT_POWER) && (val & PORT_PE)) {
+ val |= PORT_SUSPEND;
+ writel(val, &hw->port_status[0]);
+
+ /* Wait until port suspend completes */
+ if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+ PORT_SUSPEND, 1000)) {
+ pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+ __func__);
+ goto restart;
+ }
+ }
+
+ tegra_ehci_phy_restore_end(tegra->phy);
+ goto done;
+
+ restart:
+ if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ tegra_ehci_phy_restore_end(tegra->phy);
+
+ tegra_ehci_restart(hcd);
+
+ done:
+ tegra_usb_phy_preresume(tegra->phy);
+ tegra->port_resuming = 1;
+ return 0;
+}
+
+static int tegra_ehci_suspend(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+ int rc = 0;
+
+ /*
+ * When system sleep is supported and USB controller wakeup is
+ * implemented: If the controller is runtime-suspended and the
+ * wakeup setting needs to be changed, call pm_runtime_resume().
+ */
+ if (HCD_HW_ACCESSIBLE(hcd))
+ rc = controller_suspend(dev);
+ return rc;
+}
+
+static int tegra_ehci_resume(struct device *dev)
+{
+ int rc;
+
+ rc = controller_resume(dev);
+ if (rc == 0) {
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+ return rc;
+}
+
+static int tegra_ehci_runtime_suspend(struct device *dev)
+{
+ return controller_suspend(dev);
+}
+
+static int tegra_ehci_runtime_resume(struct device *dev)
+{
+ return controller_resume(dev);
+}
+
+static const struct dev_pm_ops tegra_ehci_pm_ops = {
+ .suspend = tegra_ehci_suspend,
+ .resume = tegra_ehci_resume,
+ .runtime_suspend = tegra_ehci_runtime_suspend,
+ .runtime_resume = tegra_ehci_runtime_resume,
+};
+
+#endif
+
static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
static int tegra_ehci_probe(struct platform_device *pdev)
@@ -722,7 +753,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
}
tegra->host_resumed = 1;
- tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
tegra->ehci = hcd_to_ehci(hcd);
irq = platform_get_irq(pdev, 0);
@@ -746,6 +776,14 @@ static int tegra_ehci_probe(struct platform_device *pdev)
goto fail;
}
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
+ /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
+ /* if (!pdata->power_down_on_bus_suspend) */
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
return err;
fail:
@@ -772,33 +810,6 @@ fail_hcd:
return err;
}
-#ifdef CONFIG_PM
-static int tegra_ehci_resume(struct platform_device *pdev)
-{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- if (tegra->bus_suspended)
- return 0;
-
- return tegra_usb_resume(hcd);
-}
-
-static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- if (tegra->bus_suspended)
- return 0;
-
- if (time_before(jiffies, tegra->ehci->next_statechange))
- msleep(10);
-
- return tegra_usb_suspend(hcd);
-}
-#endif
-
static int tegra_ehci_remove(struct platform_device *pdev)
{
struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
@@ -807,6 +818,10 @@ static int tegra_ehci_remove(struct platform_device *pdev)
if (tegra == NULL || hcd == NULL)
return -EINVAL;
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
#ifdef CONFIG_USB_OTG_UTILS
if (tegra->transceiver) {
otg_set_host(tegra->transceiver->otg, NULL);
@@ -847,13 +862,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
static struct platform_driver tegra_ehci_driver = {
.probe = tegra_ehci_probe,
.remove = tegra_ehci_remove,
-#ifdef CONFIG_PM
- .suspend = tegra_ehci_suspend,
- .resume = tegra_ehci_resume,
-#endif
.shutdown = tegra_ehci_hcd_shutdown,
.driver = {
.name = "tegra-ehci",
.of_match_table = tegra_ehci_of_match,
+#ifdef CONFIG_PM
+ .pm = &tegra_ehci_pm_ops,
+#endif
}
};
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 97ab975fa442..768b4b55c816 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
usb_nop_xceiv_register();
musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
- return -ENODEV;
+ goto unregister;
musb->mregs += DAVINCI_BASE_OFFSET;
@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
fail:
usb_put_transceiver(musb->xceiv);
+unregister:
usb_nop_xceiv_unregister();
return -ENODEV;
}
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 93de517a32a0..f4a40f001c88 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -449,7 +449,7 @@ struct musb {
* We added this flag to forcefully disable double
* buffering until we get it working.
*/
- unsigned double_buffer_not_ok:1 __deprecated;
+ unsigned double_buffer_not_ok:1;
struct musb_hdrc_config *config;
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 3ece43a2e4c1..a0a2178974fe 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
struct gpio_vbus_data *gpio_vbus =
container_of(work, struct gpio_vbus_data, work);
struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
- int gpio;
+ int gpio, status;
if (!gpio_vbus->phy.otg->gadget)
return;
@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
*/
gpio = pdata->gpio_pullup;
if (is_vbus_powered(pdata)) {
+ status = USB_EVENT_VBUS;
gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+ gpio_vbus->phy.last_event = status;
usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
/* drawing a "unit load" is *always* OK, except for OTG */
@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
/* optionally enable D+ pullup */
if (gpio_is_valid(gpio))
gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
} else {
/* optionally disable D+ pullup */
if (gpio_is_valid(gpio))
@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
set_vbus_draw(gpio_vbus, 0);
usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+ status = USB_EVENT_NONE;
gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+ gpio_vbus->phy.last_event = status;
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
}
}
@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
irq, err);
goto err_irq;
}
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
+
INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");