summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci/task.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci/task.c')
-rw-r--r--drivers/scsi/isci/task.c1691
1 files changed, 1691 insertions, 0 deletions
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
new file mode 100644
index 000000000000..5e6f55863407
--- /dev/null
+++ b/drivers/scsi/isci/task.c
@@ -0,0 +1,1691 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/completion.h>
+#include "scic_task_request.h"
+#include "scic_remote_device.h"
+#include "scic_io_request.h"
+#include "scic_sds_remote_device.h"
+#include "scic_sds_remote_node_context.h"
+#include "isci.h"
+#include "request.h"
+#include "sata.h"
+#include "task.h"
+
+
+/**
+ * isci_task_execute_task() - This function is one of the SAS Domain Template
+ * functions. This function is called by libsas to send a task down to
+ * hardware.
+ * @task: This parameter specifies the SAS task to send.
+ * @num: This parameter specifies the number of tasks to queue.
+ * @gfp_flags: This parameter specifies the context of this call.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags)
+{
+ struct isci_host *isci_host;
+ struct isci_request *request = NULL;
+ struct isci_remote_device *device;
+ unsigned long flags;
+ unsigned long quiesce_flags = 0;
+ int ret;
+ enum sci_status status;
+
+
+ dev_dbg(task->dev->port->ha->dev, "%s: num=%d\n", __func__, num);
+
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+
+ isci_task_complete_for_upper_layer(
+ task,
+ SAS_TASK_UNDELIVERED,
+ SAM_STAT_TASK_ABORTED,
+ isci_perform_normal_io_completion
+ );
+
+ return 0; /* The I/O was accepted (and failed). */
+ }
+ if ((task->dev == NULL) || (task->dev->port == NULL)) {
+
+ /* Indicate SAS_TASK_UNDELIVERED, so that the scsi midlayer
+ * removes the target.
+ */
+ isci_task_complete_for_upper_layer(
+ task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN,
+ isci_perform_normal_io_completion
+ );
+ return 0; /* The I/O was accepted (and failed). */
+ }
+ isci_host = isci_host_from_sas_ha(task->dev->port->ha);
+
+ /* Check if we have room for more tasks */
+ ret = isci_host_can_queue(isci_host, num);
+
+ if (ret) {
+ dev_warn(task->dev->port->ha->dev, "%s: queue full\n", __func__);
+ return ret;
+ }
+
+ do {
+ dev_dbg(task->dev->port->ha->dev,
+ "task = %p, num = %d; dev = %p; cmd = %p\n",
+ task, num, task->dev, task->uldd_task);
+
+ if ((task->dev == NULL) || (task->dev->port == NULL)) {
+ dev_warn(task->dev->port->ha->dev,
+ "%s: task %p's port or dev == NULL!\n",
+ __func__, task);
+
+ /* Indicate SAS_TASK_UNDELIVERED, so that the scsi
+ * midlayer removes the target.
+ */
+ isci_task_complete_for_upper_layer(
+ task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN,
+ isci_perform_normal_io_completion
+ );
+ /* We don't have a valid host reference, so we
+ * can't control the host queueing condition.
+ */
+ continue;
+ }
+
+ device = isci_dev_from_domain_dev(task->dev);
+
+ isci_host = isci_host_from_sas_ha(task->dev->port->ha);
+
+ /* check if the controller hasn't started or if the device
+ * is ready but not accepting IO.
+ */
+ if (device) {
+
+ spin_lock_irqsave(&device->host_quiesce_lock,
+ quiesce_flags);
+ }
+ /* From this point onward, any process that needs to guarantee
+ * that there is no kernel I/O being started will have to wait
+ * for the quiesce spinlock.
+ */
+
+ if (isci_host_get_state(isci_host) == isci_starting ||
+ (device && ((isci_remote_device_get_state(device) == isci_ready) ||
+ (isci_remote_device_get_state(device) == isci_host_quiesce)))) {
+
+ /* Forces a retry from scsi mid layer. */
+ dev_warn(task->dev->port->ha->dev,
+ "%s: task %p: isci_host->status = %d, "
+ "device = %p\n",
+ __func__,
+ task,
+ isci_host_get_state(isci_host),
+ device);
+
+ if (device)
+ dev_dbg(task->dev->port->ha->dev,
+ "%s: device->status = 0x%x\n",
+ __func__,
+ isci_remote_device_get_state(device));
+
+ /* Indicate QUEUE_FULL so that the scsi midlayer
+ * retries.
+ */
+ isci_task_complete_for_upper_layer(
+ task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL,
+ isci_perform_normal_io_completion
+ );
+ isci_host_can_dequeue(isci_host, 1);
+ }
+ /* the device is going down... */
+ else if (!device || (isci_ready_for_io != isci_remote_device_get_state(device))) {
+
+ dev_dbg(task->dev->port->ha->dev,
+ "%s: task %p: isci_host->status = %d, "
+ "device = %p\n",
+ __func__,
+ task,
+ isci_host_get_state(isci_host),
+ device);
+
+ if (device)
+ dev_dbg(task->dev->port->ha->dev,
+ "%s: device->status = 0x%x\n",
+ __func__,
+ isci_remote_device_get_state(device));
+
+ /* Indicate SAS_TASK_UNDELIVERED, so that the scsi
+ * midlayer removes the target.
+ */
+ isci_task_complete_for_upper_layer(
+ task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN,
+ isci_perform_normal_io_completion
+ );
+ isci_host_can_dequeue(isci_host, 1);
+
+ } else {
+ /* build and send the request. */
+ status = isci_request_execute(isci_host, task, &request,
+ gfp_flags);
+
+ if (status == SCI_SUCCESS) {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ } else {
+ /* Indicate QUEUE_FULL so that the scsi
+ * midlayer retries. if the request
+ * failed for remote device reasons,
+ * it gets returned as
+ * SAS_TASK_UNDELIVERED next time
+ * through.
+ */
+ isci_task_complete_for_upper_layer(
+ task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL,
+ isci_perform_normal_io_completion
+ );
+ isci_host_can_dequeue(isci_host, 1);
+ }
+ }
+ if (device) {
+ spin_unlock_irqrestore(&device->host_quiesce_lock,
+ quiesce_flags
+ );
+ }
+ task = list_entry(task->list.next, struct sas_task, list);
+ } while (--num > 0);
+ return 0;
+}
+
+
+
+/**
+ * isci_task_request_build() - This function builds the task request object.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @request: This parameter points to the isci_request object allocated in the
+ * request construct function.
+ * @tmf: This parameter is the task management struct to be built
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+static enum sci_status isci_task_request_build(
+ struct isci_host *isci_host,
+ struct isci_request **isci_request,
+ struct isci_tmf *isci_tmf)
+{
+ struct scic_sds_remote_device *sci_device;
+ enum sci_status status = SCI_FAILURE;
+ struct isci_request *request;
+ struct isci_remote_device *isci_device;
+/* struct sci_sas_identify_address_frame_protocols dev_protocols; */
+ struct smp_discover_response_protocols dev_protocols;
+
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_tmf = %p\n", __func__, isci_tmf);
+
+ isci_device = isci_tmf->device;
+ sci_device = isci_device->sci_device_handle;
+
+ /* do common allocation and init of request object. */
+ status = isci_request_alloc_tmf(
+ isci_host,
+ isci_tmf,
+ &request,
+ isci_device,
+ GFP_ATOMIC
+ );
+
+ if (status != SCI_SUCCESS)
+ goto out;
+
+ /* let the core do it's construct. */
+ status = scic_task_request_construct(
+ isci_host->core_controller,
+ sci_device,
+ SCI_CONTROLLER_INVALID_IO_TAG,
+ request,
+ request->sci_request_mem_ptr,
+ &request->sci_request_handle
+ );
+
+ if (status != SCI_SUCCESS) {
+ dev_warn(&isci_host->pdev->dev,
+ "%s: scic_task_request_construct failed - "
+ "status = 0x%x\n",
+ __func__,
+ status);
+ goto errout;
+ }
+
+ sci_object_set_association(
+ request->sci_request_handle,
+ request
+ );
+
+ scic_remote_device_get_protocols(
+ sci_device,
+ &dev_protocols
+ );
+
+ /* let the core do it's protocol
+ * specific construction.
+ */
+ if (dev_protocols.u.bits.attached_ssp_target) {
+
+ isci_tmf->proto = SAS_PROTOCOL_SSP;
+ status = scic_task_request_construct_ssp(
+ request->sci_request_handle
+ );
+ if (status != SCI_SUCCESS)
+ goto errout;
+ }
+
+ if (dev_protocols.u.bits.attached_stp_target) {
+
+ isci_tmf->proto = SAS_PROTOCOL_SATA;
+ status = isci_sata_management_task_request_build(request);
+
+ if (status != SCI_SUCCESS)
+ goto errout;
+ }
+
+ goto out;
+
+ errout:
+
+ /* release the dma memory if we fail. */
+ isci_request_free(isci_host, request);
+ request = NULL;
+
+ out:
+ *isci_request = request;
+ return status;
+}
+
+/**
+ * isci_tmf_timeout_cb() - This function is called as a kernel callback when
+ * the timeout period for the TMF has expired.
+ *
+ *
+ */
+static void isci_tmf_timeout_cb(void *tmf_request_arg)
+{
+ struct isci_request *request = (struct isci_request *)tmf_request_arg;
+ struct isci_tmf *tmf = isci_request_access_tmf(request);
+ enum sci_status status;
+
+ BUG_ON(request->ttype != tmf_task);
+
+ /* This task management request has timed-out. Terminate the request
+ * so that the request eventually completes to the requestor in the
+ * request completion callback path.
+ */
+ /* Note - the timer callback function itself has provided spinlock
+ * exclusion from the start and completion paths. No need to take
+ * the request->isci_host->scic_lock here.
+ */
+
+ if (tmf->timeout_timer != NULL) {
+ /* Call the users callback, if any. */
+ if (tmf->cb_state_func != NULL)
+ tmf->cb_state_func(isci_tmf_timed_out, tmf,
+ tmf->cb_data);
+
+ /* Terminate the TMF transmit request. */
+ status = scic_controller_terminate_request(
+ request->isci_host->core_controller,
+ request->isci_device->sci_device_handle,
+ request->sci_request_handle
+ );
+
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: tmf_request = %p; tmf = %p; status = %d\n",
+ __func__, request, tmf, status);
+ } else
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: timer already canceled! "
+ "tmf_request = %p; tmf = %p\n",
+ __func__, request, tmf);
+
+ /* No need to unlock since the caller to this callback is doing it for
+ * us.
+ * request->isci_host->scic_lock
+ */
+}
+
+/**
+ * isci_task_execute_tmf() - This function builds and sends a task request,
+ * then waits for the completion.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @tmf: This parameter is the pointer to the task management structure for
+ * this request.
+ * @timeout_ms: This parameter specifies the timeout period for the task
+ * management request.
+ *
+ * TMF_RESP_FUNC_COMPLETE on successful completion of the TMF (this includes
+ * error conditions reported in the IU status), or TMF_RESP_FUNC_FAILED.
+ */
+int isci_task_execute_tmf(
+ struct isci_host *isci_host,
+ struct isci_tmf *tmf,
+ unsigned long timeout_ms)
+{
+ DECLARE_COMPLETION_ONSTACK(completion);
+ enum sci_status status = SCI_FAILURE;
+ struct scic_sds_remote_device *sci_device;
+ struct isci_remote_device *isci_device = tmf->device;
+ struct isci_request *request;
+ int ret = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+
+ /* sanity check, return TMF_RESP_FUNC_FAILED
+ * if the device is not there and ready.
+ */
+ if (!isci_device ||
+ ((isci_ready_for_io != isci_remote_device_get_state(isci_device)) &&
+ (isci_host_quiesce != isci_remote_device_get_state(isci_device)))) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p not ready (%d)\n",
+ __func__,
+ isci_device,
+ isci_remote_device_get_state(isci_device));
+ return TMF_RESP_FUNC_FAILED;
+ } else
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p\n",
+ __func__, isci_device);
+
+ sci_device = isci_device->sci_device_handle;
+
+ /* Assign the pointer to the TMF's completion kernel wait structure. */
+ tmf->complete = &completion;
+
+ isci_task_request_build(
+ isci_host,
+ &request,
+ tmf
+ );
+
+ if (!request) {
+ dev_warn(&isci_host->pdev->dev,
+ "%s: isci_task_request_build failed\n",
+ __func__);
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ /* Allocate the TMF timeout timer. */
+ tmf->timeout_timer = isci_timer_create(
+ &isci_host->timer_list_struct,
+ isci_host,
+ request,
+ isci_tmf_timeout_cb
+ );
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ /* Start the timer. */
+ if (tmf->timeout_timer)
+ isci_timer_start(tmf->timeout_timer, timeout_ms);
+ else
+ dev_warn(&isci_host->pdev->dev,
+ "%s: isci_timer_create failed!!!!\n",
+ __func__);
+
+ /* start the TMF io. */
+ status = scic_controller_start_task(
+ isci_host->core_controller,
+ sci_device,
+ request->sci_request_handle,
+ SCI_CONTROLLER_INVALID_IO_TAG
+ );
+
+ if (status != SCI_SUCCESS) {
+ dev_warn(&isci_host->pdev->dev,
+ "%s: start_io failed - status = 0x%x, request = %p\n",
+ __func__,
+ status,
+ request);
+ goto cleanup_request;
+ }
+
+ /* Call the users callback, if any. */
+ if (tmf->cb_state_func != NULL)
+ tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data);
+
+ /* Change the state of the TMF-bearing request to "started". */
+ isci_request_change_state(request, started);
+
+ /* add the request to the remote device request list. */
+ list_add(&request->dev_node, &isci_device->reqs_in_process);
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /* Wait for the TMF to complete, or a timeout. */
+ wait_for_completion(&completion);
+
+ isci_print_tmf(tmf);
+
+ if (tmf->status == SCI_SUCCESS)
+ ret = TMF_RESP_FUNC_COMPLETE;
+ else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: tmf.status == "
+ "SCI_FAILURE_IO_RESPONSE_VALID\n",
+ __func__);
+ ret = TMF_RESP_FUNC_COMPLETE;
+ }
+ /* Else - leave the default "failed" status alone. */
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: completed request = %p\n",
+ __func__,
+ request);
+
+ if (request->io_request_completion != NULL) {
+
+ /* The fact that this is non-NULL for a TMF request
+ * means there is a thread waiting for this TMF to
+ * finish.
+ */
+ complete(request->io_request_completion);
+ }
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ cleanup_request:
+
+ /* Clean up the timer if needed. */
+ if (tmf->timeout_timer) {
+ isci_timer_stop(tmf->timeout_timer);
+ isci_timer_free(&isci_host->timer_list_struct,
+ tmf->timeout_timer);
+ tmf->timeout_timer = NULL;
+ }
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ isci_request_free(isci_host, request);
+
+ return ret;
+}
+
+void isci_task_build_tmf(
+ struct isci_tmf *tmf,
+ struct isci_remote_device *isci_device,
+ enum isci_tmf_function_codes code,
+ void (*tmf_sent_cb)(enum isci_tmf_cb_state,
+ struct isci_tmf *,
+ void *),
+ void *cb_data)
+{
+ dev_dbg(&isci_device->isci_port->isci_host->pdev->dev,
+ "%s: isci_device = %p\n", __func__, isci_device);
+
+ memset(tmf, 0, sizeof(*tmf));
+
+ tmf->device = isci_device;
+ tmf->tmf_code = code;
+ tmf->timeout_timer = NULL;
+ tmf->cb_state_func = tmf_sent_cb;
+ tmf->cb_data = cb_data;
+}
+
+static struct isci_request *isci_task_get_request_from_task(
+ struct sas_task *task,
+ struct isci_host **isci_host,
+ struct isci_remote_device **isci_device)
+{
+
+ struct isci_request *request = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+
+ request = task->lldd_task;
+
+ /* If task is already done, the request isn't valid */
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&
+ (task->task_state_flags & SAS_TASK_AT_INITIATOR) &&
+ (request != NULL)) {
+
+ if (isci_host != NULL)
+ *isci_host = request->isci_host;
+
+ if (isci_device != NULL)
+ *isci_device = request->isci_device;
+ }
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return request;
+}
+
+/**
+ * isci_task_validate_request_to_abort() - This function checks the given I/O
+ * against the "started" state. If the request is still "started", it's
+ * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD
+ * BEFORE CALLING THIS FUNCTION.
+ * @isci_request: This parameter specifies the request object to control.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @isci_device: This is the device to which the request is pending.
+ * @aborted_io_completion: This is a completion structure that will be added to
+ * the request in case it is changed to aborting; this completion is
+ * triggered when the request is fully completed.
+ *
+ * Either "started" on successful change of the task status to "aborted", or
+ * "unallocated" if the task cannot be controlled.
+ */
+static enum isci_request_status isci_task_validate_request_to_abort(
+ struct isci_request *isci_request,
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ struct completion *aborted_io_completion)
+{
+ enum isci_request_status old_state = unallocated;
+
+ /* Only abort the task if it's in the
+ * device's request_in_process list
+ */
+ if (isci_request && !list_empty(&isci_request->dev_node)) {
+ old_state = isci_request_change_started_to_aborted(
+ isci_request, aborted_io_completion);
+
+ /* Only abort requests in the started state. */
+ if (old_state != started)
+ old_state = unallocated;
+ }
+
+ return old_state;
+}
+
+static void isci_request_cleanup_completed_loiterer(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ struct isci_request *isci_request)
+{
+ struct sas_task *task = isci_request_access_task(isci_request);
+ unsigned long flags;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device=%p, request=%p, task=%p\n",
+ __func__, isci_device, isci_request,
+ isci_request->ttype_ptr.io_task_ptr);
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+ list_del_init(&isci_request->dev_node);
+ if (task != NULL)
+ task->lldd_task = NULL;
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ isci_request_free(isci_host, isci_request);
+}
+/**
+ * isci_terminate_request_core() - This function will terminate the given
+ * request, and wait for it to complete. This function must only be called
+ * from a thread that can wait. Note that the request is terminated and
+ * completed (back to the host, if started there).
+ * @isci_host: This SCU.
+ * @isci_device: The target.
+ * @isci_request: The I/O request to be terminated.
+ *
+ *
+ */
+static void isci_terminate_request_core(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ struct isci_request *isci_request,
+ struct completion *request_completion)
+{
+ enum sci_status status = SCI_SUCCESS;
+ bool was_terminated = false;
+ bool needs_cleanup_handling = false;
+ enum isci_request_status request_status;
+ unsigned long flags;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: device = %p; request = %p\n",
+ __func__, isci_device, isci_request);
+
+ /* Peek at the current status of the request. This will tell
+ * us if there was special handling on the request such that it
+ * needs to be detached and freed here.
+ */
+ spin_lock_irqsave(&isci_request->state_lock, flags);
+ request_status = isci_request_get_state(isci_request);
+
+ /* TMFs are in their own thread */
+ if ((isci_request->ttype == io_task) &&
+ ((request_status == aborted) ||
+ (request_status == aborting) ||
+ (request_status == terminating)))
+ /* The completion routine won't free a request in
+ * the aborted/aborting/terminating state, so we do
+ * it here.
+ */
+ needs_cleanup_handling = true;
+
+ spin_unlock_irqrestore(&isci_request->state_lock, flags);
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+ /* Make sure the request wasn't just sitting around signalling
+ * device condition (if the request handle is NULL, then the
+ * request completed but needed additional handling here).
+ */
+ if (isci_request->sci_request_handle != NULL) {
+ was_terminated = true;
+ status = scic_controller_terminate_request(
+ isci_host->core_controller,
+ isci_device->sci_device_handle,
+ isci_request->sci_request_handle
+ );
+ }
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /*
+ * The only time the request to terminate will
+ * fail is when the io request is completed and
+ * being aborted.
+ */
+ if (status != SCI_SUCCESS)
+ dev_err(&isci_host->pdev->dev,
+ "%s: scic_controller_terminate_request"
+ " returned = 0x%x\n",
+ __func__,
+ status);
+ else {
+ if (was_terminated) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: before completion wait (%p)\n",
+ __func__,
+ request_completion);
+
+ /* Wait here for the request to complete. */
+ wait_for_completion(request_completion);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: after completion wait (%p)\n",
+ __func__,
+ request_completion);
+ }
+
+ if (needs_cleanup_handling)
+ isci_request_cleanup_completed_loiterer(
+ isci_host, isci_device, isci_request
+ );
+ }
+}
+static void isci_terminate_request(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ struct isci_request *isci_request,
+ enum isci_request_status new_request_state)
+{
+ enum isci_request_status old_state;
+
+ DECLARE_COMPLETION_ONSTACK(request_completion);
+ unsigned long flags;
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ /* Change state to "new_request_state" if it is currently "started" */
+ old_state = isci_request_change_started_to_newstate(
+ isci_request,
+ &request_completion,
+ new_request_state
+ );
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ if (old_state == started)
+ /* This request was not already being aborted. If it had been,
+ * then the aborting I/O (ie. the TMF request) would not be in
+ * the aborting state, and thus would be terminated here. Note
+ * that since the TMF completion's call to the kernel function
+ * "complete()" does not happen until the pending I/O request
+ * terminate fully completes, we do not have to implement a
+ * special wait here for already aborting requests - the
+ * termination of the TMF request will force the request
+ * to finish it's already started terminate.
+ */
+ isci_terminate_request_core(isci_host, isci_device,
+ isci_request, &request_completion);
+}
+
+/**
+ * isci_terminate_pending_requests() - This function will change the all of the
+ * requests on the given device's state to "aborting", will terminate the
+ * requests, and wait for them to complete. This function must only be
+ * called from a thread that can wait. Note that the requests are all
+ * terminated and completed (back to the host, if started there).
+ * @isci_host: This parameter specifies SCU.
+ * @isci_device: This parameter specifies the target.
+ *
+ *
+ */
+void isci_terminate_pending_requests(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ enum isci_request_status new_request_state)
+{
+ struct isci_request *isci_request;
+ struct sas_task *task;
+ bool done = false;
+ unsigned long flags;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p (new request state = %d)\n",
+ __func__, isci_device, new_request_state);
+
+ #define ISCI_TERMINATE_SHOW_PENDING_REQUESTS
+ #ifdef ISCI_TERMINATE_SHOW_PENDING_REQUESTS
+ {
+ struct isci_request *request;
+
+ /* Only abort the task if it's in the
+ * device's request_in_process list
+ */
+ list_for_each_entry(request,
+ &isci_device->reqs_in_process,
+ dev_node)
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p; request is on "
+ "reqs_in_process list: %p\n",
+ __func__, isci_device, request);
+ }
+ #endif /* ISCI_TERMINATE_SHOW_PENDING_REQUESTS */
+
+ /* Clean up all pending requests. */
+ do {
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ if (list_empty(&isci_device->reqs_in_process)) {
+
+ done = true;
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p; done.\n",
+ __func__, isci_device);
+ } else {
+ /* The list was not empty - grab the first request. */
+ isci_request = list_first_entry(
+ &isci_device->reqs_in_process,
+ struct isci_request, dev_node
+ );
+ /* Note that we are not expecting to have to control
+ * the target to abort the request.
+ */
+ isci_request->complete_in_target = true;
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /* Get the libsas task reference. */
+ task = isci_request_access_task(isci_request);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device=%p request=%p; task=%p\n",
+ __func__, isci_device, isci_request, task);
+
+ /* Mark all still pending I/O with the selected next
+ * state.
+ */
+ isci_terminate_request(isci_host, isci_device,
+ isci_request, new_request_state
+ );
+
+ /* Set the 'done' state on the task. */
+ if (task)
+ isci_task_all_done(task);
+ }
+ } while (!done);
+}
+
+/**
+ * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain
+ * Template functions.
+ * @lun: This parameter specifies the lun to be reset.
+ *
+ * status, zero indicates success.
+ */
+static int isci_task_send_lu_reset_sas(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ u8 *lun)
+{
+ struct isci_tmf tmf;
+ int ret = TMF_RESP_FUNC_FAILED;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_host = %p, isci_device = %p\n",
+ __func__, isci_host, isci_device);
+ /* Send the LUN reset to the target. By the time the call returns,
+ * the TMF has fully exected in the target (in which case the return
+ * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or
+ * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED").
+ */
+ isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_lun_reset, NULL,
+ NULL);
+
+ #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */
+ ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_LU_RESET_TIMEOUT_MS);
+
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: %p: TMF_LU_RESET passed\n",
+ __func__, isci_device);
+ else
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: %p: TMF_LU_RESET failed (%x)\n",
+ __func__, isci_device, ret);
+
+ return ret;
+}
+
+/**
+ * isci_task_lu_reset() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas,
+ * to reset the given lun. Note the assumption that while this call is
+ * executing, no I/O will be sent by the host to the device.
+ * @lun: This parameter specifies the lun to be reset.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_lu_reset(
+ struct domain_device *domain_device,
+ u8 *lun)
+{
+ struct isci_host *isci_host = NULL;
+ struct isci_remote_device *isci_device = NULL;
+ int ret;
+ bool device_stopping = false;
+
+ if (domain_device == NULL) {
+ pr_warn("%s: domain_device == NULL\n", __func__);
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ isci_device = isci_dev_from_domain_dev(domain_device);
+
+ if (domain_device->port != NULL)
+ isci_host = isci_host_from_sas_ha(domain_device->port->ha);
+
+ pr_debug("%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
+ __func__, domain_device, isci_host, isci_device);
+
+ if (isci_device != NULL)
+ device_stopping = (isci_device->status == isci_stopping)
+ || (isci_device->status == isci_stopped);
+
+ /* If there is a device reset pending on any request in the
+ * device's list, fail this LUN reset request in order to
+ * escalate to the device reset.
+ */
+ if ((isci_device == NULL) ||
+ (isci_host == NULL) ||
+ ((isci_host != NULL) &&
+ (isci_device != NULL) &&
+ (device_stopping ||
+ (isci_device_is_reset_pending(isci_host, isci_device))))) {
+ dev_warn(&isci_host->pdev->dev,
+ "%s: No dev (%p), no host (%p), or "
+ "RESET PENDING: domain_device=%p\n",
+ __func__, isci_device, isci_host, domain_device);
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ /* Stop I/O to the remote device. */
+ isci_device_set_host_quiesce_lock_state(isci_device, true);
+
+ /* Send the task management part of the reset. */
+ if (sas_protocol_ata(domain_device->tproto)) {
+ ret = isci_task_send_lu_reset_sata(
+ isci_host, isci_device, lun
+ );
+ } else
+ ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun);
+
+ /* If the LUN reset worked, all the I/O can now be terminated. */
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ /* Terminate all I/O now. */
+ isci_terminate_pending_requests(isci_host,
+ isci_device,
+ terminating);
+
+ /* Resume I/O to the remote device. */
+ isci_device_set_host_quiesce_lock_state(isci_device, false);
+
+ return ret;
+}
+
+
+/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */
+int isci_task_clear_nexus_port(struct asd_sas_port *port)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+
+int isci_task_clear_nexus_ha(struct sas_ha_struct *ha)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+int isci_task_I_T_nexus_reset(struct domain_device *dev)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+/* Task Management Functions. Must be called from process context. */
+
+/**
+ * isci_abort_task_process_cb() - This is a helper function for the abort task
+ * TMF command. It manages the request state with respect to the successful
+ * transmission / completion of the abort task request.
+ * @cb_state: This parameter specifies when this function was called - after
+ * the TMF request has been started and after it has timed-out.
+ * @tmf: This parameter specifies the TMF in progress.
+ *
+ *
+ */
+static void isci_abort_task_process_cb(
+ enum isci_tmf_cb_state cb_state,
+ struct isci_tmf *tmf,
+ void *cb_data)
+{
+ struct isci_request *old_request;
+
+ old_request = (struct isci_request *)cb_data;
+
+ dev_dbg(&old_request->isci_host->pdev->dev,
+ "%s: tmf=%p, old_request=%p\n",
+ __func__, tmf, old_request);
+
+ switch (cb_state) {
+
+ case isci_tmf_started:
+ /* The TMF has been started. Nothing to do here, since the
+ * request state was already set to "aborted" by the abort
+ * task function.
+ */
+ BUG_ON(old_request->status != aborted);
+ break;
+
+ case isci_tmf_timed_out:
+
+ /* Set the task's state to "aborting", since the abort task
+ * function thread set it to "aborted" (above) in anticipation
+ * of the task management request working correctly. Since the
+ * timeout has now fired, the TMF request failed. We set the
+ * state such that the request completion will indicate the
+ * device is no longer present.
+ */
+ isci_request_change_state(old_request, aborting);
+ break;
+
+ default:
+ dev_err(&old_request->isci_host->pdev->dev,
+ "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n",
+ __func__, cb_state, tmf, old_request);
+ break;
+ }
+}
+
+/**
+ * isci_task_abort_task() - This function is one of the SAS Domain Template
+ * functions. This function is called by libsas to abort a specified task.
+ * @task: This parameter specifies the SAS task to abort.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_abort_task(struct sas_task *task)
+{
+ DECLARE_COMPLETION_ONSTACK(aborted_io_completion);
+ struct isci_request *old_request = NULL;
+ struct isci_remote_device *isci_device = NULL;
+ struct isci_host *isci_host = NULL;
+ struct isci_tmf tmf;
+ int ret = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+ bool any_dev_reset, device_stopping;
+
+ /* Get the isci_request reference from the task. Note that
+ * this check does not depend on the pending request list
+ * in the device, because tasks driving resets may land here
+ * after completion in the core.
+ */
+ old_request = isci_task_get_request_from_task(task, &isci_host,
+ &isci_device);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: task = %p\n", __func__, task);
+
+ /* Check if the device has been / is currently being removed.
+ * If so, no task management will be done, and the I/O will
+ * be terminated.
+ */
+ device_stopping = (isci_device->status == isci_stopping)
+ || (isci_device->status == isci_stopped);
+
+#ifdef NOMORE
+ /* This abort task function is the first stop of the libsas error
+ * handler thread. Since libsas is executing in a thread with a
+ * referernce to the "task" parameter, that task cannot be completed
+ * directly back to the upper layers. In order to make sure that
+ * the task is managed correctly if this abort task fails, set the
+ * "SAS_TASK_STATE_ABORTED" bit now such that completions up the
+ * stack will be intercepted and only allowed to happen in the
+ * libsas SCSI error handler thread.
+ */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+#endif /* NOMORE */
+
+ /* This version of the driver will fail abort requests for
+ * SATA/STP. Failing the abort request this way will cause the
+ * SCSI error handler thread to escalate to LUN reset
+ */
+ if (sas_protocol_ata(task->task_proto) && !device_stopping) {
+ dev_warn(&isci_host->pdev->dev,
+ " task %p is for a STP/SATA device;"
+ " returning TMF_RESP_FUNC_FAILED\n"
+ " to cause a LUN reset...\n", task);
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: old_request == %p\n", __func__, old_request);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+
+ /* Don't do resets to stopping devices. */
+ if (device_stopping)
+ task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
+
+ /* See if there is a pending device reset for this device. */
+ any_dev_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ if ((isci_device != NULL) && !device_stopping)
+ any_dev_reset = any_dev_reset
+ || isci_device_is_reset_pending(isci_host,
+ isci_device
+ );
+
+ /* If the extraction of the request reference from the task
+ * failed, then the request has been completed (or if there is a
+ * pending reset then this abort request function must be failed
+ * in order to escalate to the target reset).
+ */
+ if ((old_request == NULL) ||
+ ((old_request != NULL) &&
+ (old_request->sci_request_handle == NULL) &&
+ (old_request->complete_in_target)) ||
+ any_dev_reset) {
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+
+ /* If the device reset task flag is set, fail the task
+ * management request. Otherwise, the original request
+ * has completed.
+ */
+ if (any_dev_reset) {
+
+ /* Turn off the task's DONE to make sure this
+ * task is escalated to a target reset.
+ */
+ task->task_state_flags &= ~SAS_TASK_STATE_DONE;
+
+ /* Fail the task management request in order to
+ * escalate to the target reset.
+ */
+ ret = TMF_RESP_FUNC_FAILED;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: Failing task abort in order to "
+ "escalate to target reset because\n"
+ "SAS_TASK_NEED_DEV_RESET is set for "
+ "task %p on dev %p\n",
+ __func__, task, isci_device);
+
+ } else {
+ ret = TMF_RESP_FUNC_COMPLETE;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: abort task not needed for %p\n",
+ __func__, task);
+
+ /* The request has already completed and there
+ * is nothing to do here other than to set the task
+ * done bit, and indicate that the task abort function
+ * was sucessful.
+ */
+ isci_set_task_doneflags(task);
+
+ /* Set the abort bit to make sure that libsas sticks the
+ * task in the completed task queue.
+ */
+/* task->task_state_flags |= SAS_TASK_STATE_ABORTED; */
+
+ /* Check for the situation where the request was
+ * left around on the device list but the
+ * request already completed.
+ */
+ if (old_request && !old_request->sci_request_handle) {
+
+ isci_request_cleanup_completed_loiterer(
+ isci_host, isci_device, old_request
+ );
+ }
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return ret;
+ }
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ /* Sanity check the request status, and set the I/O kernel completion
+ * struct that will be triggered when the request completes.
+ */
+ if (isci_task_validate_request_to_abort(
+ old_request,
+ isci_host,
+ isci_device,
+ &aborted_io_completion)
+ == unallocated) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: old_request not valid for device = %p\n",
+ __func__,
+ isci_device);
+ old_request = NULL;
+ }
+
+ if (!old_request) {
+
+ /* There is no isci_request attached to the sas_task.
+ * It must have been completed and detached.
+ */
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: old_request == NULL\n",
+ __func__);
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /* Set the state on the task. */
+ isci_task_all_done(task);
+
+ return TMF_RESP_FUNC_COMPLETE;
+ }
+ if (task->task_proto == SAS_PROTOCOL_SMP || device_stopping) {
+
+ if (device_stopping)
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: device is stopping, thus no TMF\n",
+ __func__);
+ else
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: request is SMP, thus no TMF\n",
+ __func__);
+
+ old_request->complete_in_target = true;
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /* Set the state on the task. */
+ isci_task_all_done(task);
+
+ ret = TMF_RESP_FUNC_COMPLETE;
+
+ /* Stopping and SMP devices are not sent a TMF, and are not
+ * reset, but the outstanding I/O request is terminated here.
+ *
+ * Clean up the request on our side, and wait for the aborted
+ * I/O to complete.
+ */
+ isci_terminate_request_core(isci_host, isci_device, old_request,
+ &aborted_io_completion);
+ } else {
+ /* Fill in the tmf stucture */
+ isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_task_abort,
+ isci_abort_task_process_cb, old_request);
+
+ tmf.io_tag = scic_io_request_get_io_tag(
+ old_request->sci_request_handle
+ );
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+ ret = isci_task_execute_tmf(isci_host, &tmf,
+ ISCI_ABORT_TASK_TIMEOUT_MS);
+
+ if (ret == TMF_RESP_FUNC_COMPLETE) {
+ old_request->complete_in_target = true;
+
+ /* Clean up the request on our side, and wait for the aborted I/O to
+ * complete.
+ */
+ isci_terminate_request_core(isci_host, isci_device, old_request,
+ &aborted_io_completion);
+
+ /* Set the state on the task. */
+ isci_task_all_done(task);
+ } else
+ dev_err(&isci_host->pdev->dev,
+ "%s: isci_task_send_tmf failed\n",
+ __func__);
+ }
+
+ return ret;
+}
+
+/**
+ * isci_task_abort_task_set() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas,
+ * to abort all task for the given lun.
+ * @d_device: This parameter specifies the domain device associated with this
+ * request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_abort_task_set(
+ struct domain_device *d_device,
+ u8 *lun)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+/**
+ * isci_task_clear_aca() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas.
+ * @d_device: This parameter specifies the domain device associated with this
+ * request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_clear_aca(
+ struct domain_device *d_device,
+ u8 *lun)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+
+/**
+ * isci_task_clear_task_set() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas.
+ * @d_device: This parameter specifies the domain device associated with this
+ * request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_clear_task_set(
+ struct domain_device *d_device,
+ u8 *lun)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+/**
+ * isci_task_query_task() - This function is implemented to cause libsas to
+ * correctly escalate the failed abort to a LUN or target reset (this is
+ * because sas_scsi_find_task libsas function does not correctly interpret
+ * all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is
+ * returned, libsas turns this into a LUN reset; when FUNC_FAILED is
+ * returned, libsas will turn this into a target reset
+ * @task: This parameter specifies the sas task being queried.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_query_task(
+ struct sas_task *task)
+{
+ /* See if there is a pending device reset for this device. */
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
+ return TMF_RESP_FUNC_FAILED;
+ else
+ return TMF_RESP_FUNC_SUCC;
+}
+
+/**
+ * isci_task_request_complete() - This function is called by the sci core when
+ * an task request completes.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @request: This parameter is the completed isci_request object.
+ * @completion_status: This parameter specifies the completion status from the
+ * sci core.
+ *
+ * none.
+ */
+void isci_task_request_complete(
+ struct isci_host *isci_host,
+ struct isci_request *request,
+ enum sci_task_status completion_status)
+{
+ struct isci_remote_device *isci_device = request->isci_device;
+ enum isci_request_status old_state;
+ struct isci_tmf *tmf = isci_request_access_tmf(request);
+ struct completion *tmf_complete;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: request = %p, status=%d\n",
+ __func__, request, completion_status);
+
+ old_state = isci_request_change_state(request, completed);
+
+ tmf->status = completion_status;
+ request->complete_in_target = true;
+
+ if (SAS_PROTOCOL_SSP == tmf->proto) {
+
+ memcpy(&tmf->resp.resp_iu,
+ scic_io_request_get_response_iu_address(
+ request->sci_request_handle
+ ),
+ sizeof(struct sci_ssp_response_iu));
+
+ } else if (SAS_PROTOCOL_SATA == tmf->proto) {
+
+ memcpy(&tmf->resp.d2h_fis,
+ scic_stp_io_request_get_d2h_reg_address(
+ request->sci_request_handle
+ ),
+ sizeof(struct sata_fis_reg_d2h)
+ );
+ }
+
+ /* Manage the timer if it is still running. */
+ if (tmf->timeout_timer) {
+
+ isci_timer_stop(tmf->timeout_timer);
+ isci_timer_free(&isci_host->timer_list_struct,
+ tmf->timeout_timer);
+ tmf->timeout_timer = NULL;
+ }
+
+ /* PRINT_TMF( ((struct isci_tmf *)request->task)); */
+ tmf_complete = tmf->complete;
+
+ scic_controller_complete_task(
+ isci_host->core_controller,
+ isci_device->sci_device_handle,
+ request->sci_request_handle
+ );
+ /* NULL the request handle to make sure it cannot be terminated
+ * or completed again.
+ */
+ request->sci_request_handle = NULL;
+
+ isci_request_change_state(request, unallocated);
+ list_del_init(&request->dev_node);
+
+ /* The task management part completes last. */
+ complete(tmf_complete);
+}
+
+
+/**
+ * isci_task_ssp_request_get_lun() - This function is called by the sci core to
+ * retrieve the lun for a given task request.
+ * @request: This parameter is the isci_request object.
+ *
+ * lun for specified task request.
+ */
+u32 isci_task_ssp_request_get_lun(struct isci_request *request)
+{
+ struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
+
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: lun = %d\n", __func__, isci_tmf->lun[0]);
+/* @todo: build lun from array of bytes to 32 bit */
+ return isci_tmf->lun[0];
+}
+
+/**
+ * isci_task_ssp_request_get_function() - This function is called by the sci
+ * core to retrieve the function for a given task request.
+ * @request: This parameter is the isci_request object.
+ *
+ * function code for specified task request.
+ */
+u8 isci_task_ssp_request_get_function(struct isci_request *request)
+{
+ struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
+
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: func = %d\n", __func__, isci_tmf->tmf_code);
+
+ return isci_tmf->tmf_code;
+}
+
+/**
+ * isci_task_ssp_request_get_io_tag_to_manage() - This function is called by
+ * the sci core to retrieve the io tag for a given task request.
+ * @request: This parameter is the isci_request object.
+ *
+ * io tag for specified task request.
+ */
+u16 isci_task_ssp_request_get_io_tag_to_manage(struct isci_request *request)
+{
+ u16 io_tag = SCI_CONTROLLER_INVALID_IO_TAG;
+
+ if (tmf_task == request->ttype) {
+ struct isci_tmf *tmf = isci_request_access_tmf(request);
+ io_tag = tmf->io_tag;
+ }
+
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: request = %p, io_tag = %d\n",
+ __func__, request, io_tag);
+
+ return io_tag;
+}
+
+/**
+ * isci_task_ssp_request_get_response_data_address() - This function is called
+ * by the sci core to retrieve the response data address for a given task
+ * request.
+ * @request: This parameter is the isci_request object.
+ *
+ * response data address for specified task request.
+ */
+void *isci_task_ssp_request_get_response_data_address(
+ struct isci_request *request)
+{
+ struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
+
+ return &isci_tmf->resp.resp_iu;
+}
+
+/**
+ * isci_task_ssp_request_get_response_data_length() - This function is called
+ * by the sci core to retrieve the response data length for a given task
+ * request.
+ * @request: This parameter is the isci_request object.
+ *
+ * response data length for specified task request.
+ */
+u32 isci_task_ssp_request_get_response_data_length(
+ struct isci_request *request)
+{
+ struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
+
+ return sizeof(isci_tmf->resp.resp_iu);
+}
+
+/**
+ * isci_bus_reset_handler() - This function performs a target reset of the
+ * device referenced by "cmd'. This function is exported through the
+ * "struct scsi_host_template" structure such that it is called when an I/O
+ * recovery process has escalated to a target reset. Note that this function
+ * is called from the scsi error handler event thread, so may block on calls.
+ * @scsi_cmd: This parameter specifies the target to be reset.
+ *
+ * SUCCESS if the reset process was successful, else FAILED.
+ */
+int isci_bus_reset_handler(struct scsi_cmnd *cmd)
+{
+ unsigned long flags = 0;
+ struct isci_host *isci_host = NULL;
+ enum sci_status status;
+ int base_status;
+ struct isci_remote_device *isci_dev
+ = isci_dev_from_domain_dev(
+ sdev_to_domain_dev(cmd->device));
+
+ dev_dbg(&cmd->device->sdev_gendev,
+ "%s: cmd %p, isci_dev %p\n",
+ __func__, cmd, isci_dev);
+
+ if (!isci_dev) {
+ dev_warn(&cmd->device->sdev_gendev,
+ "%s: isci_dev is GONE!\n",
+ __func__);
+
+ return TMF_RESP_FUNC_COMPLETE; /* Nothing to reset. */
+ }
+
+ if (isci_dev->isci_port != NULL)
+ isci_host = isci_dev->isci_port->isci_host;
+
+ if (isci_host != NULL)
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ status = scic_remote_device_reset(isci_dev->sci_device_handle);
+ if (status != SCI_SUCCESS) {
+
+ if (isci_host != NULL)
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ scmd_printk(KERN_WARNING, cmd,
+ "%s: scic_remote_device_reset(%p) returned %d!\n",
+ __func__, isci_dev, status);
+
+ return TMF_RESP_FUNC_FAILED;
+ }
+ if (isci_host != NULL)
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /* Stop I/O to the remote device. */
+ isci_device_set_host_quiesce_lock_state(isci_dev, true);
+
+ /* Make sure all pending requests are able to be fully terminated. */
+ isci_device_clear_reset_pending(isci_dev);
+
+ /* Terminate in-progress I/O now. */
+ isci_remote_device_nuke_requests(isci_dev);
+
+ /* Call into the libsas default handler (which calls sas_phy_reset). */
+ base_status = sas_eh_bus_reset_handler(cmd);
+
+ if (base_status != SUCCESS) {
+
+ /* There can be cases where the resets to individual devices
+ * behind an expander will fail because of an unplug of the
+ * expander itself.
+ */
+ scmd_printk(KERN_WARNING, cmd,
+ "%s: sas_eh_bus_reset_handler(%p) returned %d!\n",
+ __func__, cmd, base_status);
+ }
+
+ /* WHAT TO DO HERE IF sas_phy_reset FAILS? */
+
+ if (isci_host != NULL)
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+ status
+ = scic_remote_device_reset_complete(isci_dev->sci_device_handle);
+
+ if (isci_host != NULL)
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ if (status != SCI_SUCCESS) {
+ scmd_printk(KERN_WARNING, cmd,
+ "%s: scic_remote_device_reset_complete(%p) "
+ "returned %d!\n",
+ __func__, isci_dev, status);
+ }
+ /* WHAT TO DO HERE IF scic_remote_device_reset_complete FAILS? */
+
+ dev_dbg(&cmd->device->sdev_gendev,
+ "%s: cmd %p, isci_dev %p complete.\n",
+ __func__, cmd, isci_dev);
+
+ /* Resume I/O to the remote device. */
+ isci_device_set_host_quiesce_lock_state(isci_dev, false);
+
+ return TMF_RESP_FUNC_COMPLETE;
+}