diff options
author | Ben Hutchings <ben@decadent.org.uk> | 2011-11-27 17:08:33 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2011-11-29 00:21:36 -0500 |
commit | 3b1588593097b7d71f44c4b7b435bf28924316e0 (patch) | |
tree | 00c3fe0e807224ec9c927f6b116b3be451257255 /net/dsa | |
parent | c8f0b86996c88081095124d16b869e8d8a1c02c5 (diff) | |
download | linux-3b1588593097b7d71f44c4b7b435bf28924316e0.tar.gz linux-3b1588593097b7d71f44c4b7b435bf28924316e0.tar.xz linux-3b1588593097b7d71f44c4b7b435bf28924316e0.zip |
dsa: Move switch drivers to new directory drivers/net/dsa
Support for specific hardware belongs under drivers/net/ not net/.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/dsa')
-rw-r--r-- | net/dsa/Kconfig | 36 | ||||
-rw-r--r-- | net/dsa/Makefile | 11 | ||||
-rw-r--r-- | net/dsa/mv88e6060.c | 293 | ||||
-rw-r--r-- | net/dsa/mv88e6123_61_65.c | 438 | ||||
-rw-r--r-- | net/dsa/mv88e6131.c | 435 | ||||
-rw-r--r-- | net/dsa/mv88e6xxx.c | 549 | ||||
-rw-r--r-- | net/dsa/mv88e6xxx.h | 98 |
7 files changed, 1 insertions, 1859 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 7e12303827e8..274791cd7a35 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -1,4 +1,4 @@ -menuconfig NET_DSA +config NET_DSA tristate "Distributed Switch Architecture support" default n depends on EXPERIMENTAL && NETDEVICES && !S390 @@ -23,38 +23,4 @@ config NET_DSA_TAG_TRAILER bool default n - -# switch drivers -config NET_DSA_MV88E6XXX - tristate - default n - -config NET_DSA_MV88E6060 - tristate "Marvell 88E6060 ethernet switch chip support" - select NET_DSA_TAG_TRAILER - ---help--- - This enables support for the Marvell 88E6060 ethernet switch - chip. - -config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n - -config NET_DSA_MV88E6131 - tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support" - select NET_DSA_MV88E6XXX - select NET_DSA_MV88E6XXX_NEED_PPU - select NET_DSA_TAG_DSA - ---help--- - This enables support for the Marvell 88E6085/6095/6095F/6131 - ethernet switch chips. - -config NET_DSA_MV88E6123_61_65 - tristate "Marvell 88E6123/6161/6165 ethernet switch chip support" - select NET_DSA_MV88E6XXX - select NET_DSA_TAG_EDSA - ---help--- - This enables support for the Marvell 88E6123/6161/6165 - ethernet switch chips. - endif diff --git a/net/dsa/Makefile b/net/dsa/Makefile index 191dd482e557..7b9fcbbeda5d 100644 --- a/net/dsa/Makefile +++ b/net/dsa/Makefile @@ -6,14 +6,3 @@ dsa_core-y += dsa.o slave.o dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o - -# switch drivers -obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o -mv88e6xxx_drv-y += mv88e6xxx.o -ifdef CONFIG_NET_DSA_MV88E6123_61_65 -mv88e6xxx_drv-y += mv88e6123_61_65.o -endif -ifdef CONFIG_NET_DSA_MV88E6131 -mv88e6xxx_drv-y += mv88e6131.o -endif diff --git a/net/dsa/mv88e6060.c b/net/dsa/mv88e6060.c deleted file mode 100644 index 7fc4e81d4d43..000000000000 --- a/net/dsa/mv88e6060.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips - * Copyright (c) 2008-2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> - -#define REG_PORT(p) (8 + (p)) -#define REG_GLOBAL 0x0f - -static int reg_read(struct dsa_switch *ds, int addr, int reg) -{ - return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg); -} - -#define REG_READ(addr, reg) \ - ({ \ - int __ret; \ - \ - __ret = reg_read(ds, addr, reg); \ - if (__ret < 0) \ - return __ret; \ - __ret; \ - }) - - -static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) -{ - return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr, - reg, val); -} - -#define REG_WRITE(addr, reg, val) \ - ({ \ - int __ret; \ - \ - __ret = reg_write(ds, addr, reg, val); \ - if (__ret < 0) \ - return __ret; \ - }) - -static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr) -{ - int ret; - - ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03); - if (ret >= 0) { - ret &= 0xfff0; - if (ret == 0x0600) - return "Marvell 88E6060"; - } - - return NULL; -} - -static int mv88e6060_switch_reset(struct dsa_switch *ds) -{ - int i; - int ret; - - /* - * Set all ports to the disabled state. - */ - for (i = 0; i < 6; i++) { - ret = REG_READ(REG_PORT(i), 0x04); - REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); - } - - /* - * Wait for transmit queues to drain. - */ - msleep(2); - - /* - * Reset the switch. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); - - /* - * Wait up to one second for reset to complete. - */ - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - if ((ret & 0x8000) == 0x0000) - break; - - msleep(1); - } - if (i == 1000) - return -ETIMEDOUT; - - return 0; -} - -static int mv88e6060_setup_global(struct dsa_switch *ds) -{ - /* - * Disable discarding of frames with excessive collisions, - * set the maximum frame size to 1536 bytes, and mask all - * interrupt sources. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0x0800); - - /* - * Enable automatic address learning, set the address - * database size to 1024 entries, and set the default aging - * time to 5 minutes. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0x2130); - - return 0; -} - -static int mv88e6060_setup_port(struct dsa_switch *ds, int p) -{ - int addr = REG_PORT(p); - - /* - * Do not force flow control, disable Ingress and Egress - * Header tagging, disable VLAN tunneling, and set the port - * state to Forwarding. Additionally, if this is the CPU - * port, enable Ingress and Egress Trailer tagging mode. - */ - REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003); - - /* - * Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the CPU port. - */ - REG_WRITE(addr, 0x06, - ((p & 0xf) << 12) | - (dsa_is_cpu_port(ds, p) ? - ds->phys_port_mask : - (1 << ds->dst->cpu_port))); - - /* - * Port Association Vector: when learning source addresses - * of packets, add the address to the address database using - * a port bitmap that has only the bit for this port set and - * the other bits clear. - */ - REG_WRITE(addr, 0x0b, 1 << p); - - return 0; -} - -static int mv88e6060_setup(struct dsa_switch *ds) -{ - int i; - int ret; - - ret = mv88e6060_switch_reset(ds); - if (ret < 0) - return ret; - - /* @@@ initialise atu */ - - ret = mv88e6060_setup_global(ds); - if (ret < 0) - return ret; - - for (i = 0; i < 6; i++) { - ret = mv88e6060_setup_port(ds, i); - if (ret < 0) - return ret; - } - - return 0; -} - -static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr) -{ - REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]); - REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]); - REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]); - - return 0; -} - -static int mv88e6060_port_to_phy_addr(int port) -{ - if (port >= 0 && port <= 5) - return port; - return -1; -} - -static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum) -{ - int addr; - - addr = mv88e6060_port_to_phy_addr(port); - if (addr == -1) - return 0xffff; - - return reg_read(ds, addr, regnum); -} - -static int -mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) -{ - int addr; - - addr = mv88e6060_port_to_phy_addr(port); - if (addr == -1) - return 0xffff; - - return reg_write(ds, addr, regnum, val); -} - -static void mv88e6060_poll_link(struct dsa_switch *ds) -{ - int i; - - for (i = 0; i < DSA_MAX_PORTS; i++) { - struct net_device *dev; - int uninitialized_var(port_status); - int link; - int speed; - int duplex; - int fc; - - dev = ds->ports[i]; - if (dev == NULL) - continue; - - link = 0; - if (dev->flags & IFF_UP) { - port_status = reg_read(ds, REG_PORT(i), 0x00); - if (port_status < 0) - continue; - - link = !!(port_status & 0x1000); - } - - if (!link) { - if (netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link down\n", dev->name); - netif_carrier_off(dev); - } - continue; - } - - speed = (port_status & 0x0100) ? 100 : 10; - duplex = (port_status & 0x0200) ? 1 : 0; - fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0; - - if (!netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " - "flow control %sabled\n", dev->name, - speed, duplex ? "full" : "half", - fc ? "en" : "dis"); - netif_carrier_on(dev); - } - } -} - -static struct dsa_switch_driver mv88e6060_switch_driver = { - .tag_protocol = htons(ETH_P_TRAILER), - .probe = mv88e6060_probe, - .setup = mv88e6060_setup, - .set_addr = mv88e6060_set_addr, - .phy_read = mv88e6060_phy_read, - .phy_write = mv88e6060_phy_write, - .poll_link = mv88e6060_poll_link, -}; - -static int __init mv88e6060_init(void) -{ - register_switch_driver(&mv88e6060_switch_driver); - return 0; -} -module_init(mv88e6060_init); - -static void __exit mv88e6060_cleanup(void) -{ - unregister_switch_driver(&mv88e6060_switch_driver); -} -module_exit(mv88e6060_cleanup); - -MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); -MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mv88e6060"); diff --git a/net/dsa/mv88e6123_61_65.c b/net/dsa/mv88e6123_61_65.c deleted file mode 100644 index c0a458fc698f..000000000000 --- a/net/dsa/mv88e6123_61_65.c +++ /dev/null @@ -1,438 +0,0 @@ -/* - * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support - * Copyright (c) 2008-2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> -#include "mv88e6xxx.h" - -static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr) -{ - int ret; - - ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); - if (ret >= 0) { - ret &= 0xfff0; - if (ret == 0x1210) - return "Marvell 88E6123"; - if (ret == 0x1610) - return "Marvell 88E6161"; - if (ret == 0x1650) - return "Marvell 88E6165"; - } - - return NULL; -} - -static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds) -{ - int i; - int ret; - - /* - * Set all ports to the disabled state. - */ - for (i = 0; i < 8; i++) { - ret = REG_READ(REG_PORT(i), 0x04); - REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); - } - - /* - * Wait for transmit queues to drain. - */ - msleep(2); - - /* - * Reset the switch. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0xc400); - - /* - * Wait up to one second for reset to complete. - */ - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - if ((ret & 0xc800) == 0xc800) - break; - - msleep(1); - } - if (i == 1000) - return -ETIMEDOUT; - - return 0; -} - -static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) -{ - int ret; - int i; - - /* - * Disable the PHY polling unit (since there won't be any - * external PHYs to poll), don't discard packets with - * excessive collisions, and mask all interrupt sources. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0x0000); - - /* - * Set the default address aging time to 5 minutes, and - * enable address learn messages to be sent to all message - * ports. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); - - /* - * Configure the priority mapping registers. - */ - ret = mv88e6xxx_config_prio(ds); - if (ret < 0) - return ret; - - /* - * Configure the upstream port, and configure the upstream - * port as the port to which ingress and egress monitor frames - * are to be sent. - */ - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); - - /* - * Disable remote management for now, and set the switch's - * DSA device number. - */ - REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f); - - /* - * Send all frames with destination addresses matching - * 01:80:c2:00:00:2x to the CPU port. - */ - REG_WRITE(REG_GLOBAL2, 0x02, 0xffff); - - /* - * Send all frames with destination addresses matching - * 01:80:c2:00:00:0x to the CPU port. - */ - REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); - - /* - * Disable the loopback filter, disable flow control - * messages, disable flood broadcast override, disable - * removing of provider tags, disable ATU age violation - * interrupts, disable tag flow control, force flow - * control priority to the highest, and send all special - * multicast frames to the CPU at the highest priority. - */ - REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); - - /* - * Program the DSA routing table. - */ - for (i = 0; i < 32; i++) { - int nexthop; - - nexthop = 0x1f; - if (i != ds->index && i < ds->dst->pd->nr_chips) - nexthop = ds->pd->rtable[i] & 0x1f; - - REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop); - } - - /* - * Clear all trunk masks. - */ - for (i = 0; i < 8; i++) - REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff); - - /* - * Clear all trunk mappings. - */ - for (i = 0; i < 16; i++) - REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); - - /* - * Disable ingress rate limiting by resetting all ingress - * rate limit registers to their initial state. - */ - for (i = 0; i < 6; i++) - REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8)); - - /* - * Initialise cross-chip port VLAN table to reset defaults. - */ - REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000); - - /* - * Clear the priority override table. - */ - for (i = 0; i < 16; i++) - REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8)); - - /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */ - - return 0; -} - -static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) -{ - int addr = REG_PORT(p); - u16 val; - - /* - * MAC Forcing register: don't force link, speed, duplex - * or flow control state to any particular values on physical - * ports, but force the CPU port and all DSA ports to 1000 Mb/s - * full duplex. - */ - if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) - REG_WRITE(addr, 0x01, 0x003e); - else - REG_WRITE(addr, 0x01, 0x0003); - - /* - * Do not limit the period of time that this port can be - * paused for by the remote end or the period of time that - * this port can pause the remote end. - */ - REG_WRITE(addr, 0x02, 0x0000); - - /* - * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, - * disable Header mode, enable IGMP/MLD snooping, disable VLAN - * tunneling, determine priority by looking at 802.1p and IP - * priority fields (IP prio has precedence), and set STP state - * to Forwarding. - * - * If this is the CPU link, use DSA or EDSA tagging depending - * on which tagging mode was configured. - * - * If this is a link to another switch, use DSA tagging mode. - * - * If this is the upstream port for this switch, enable - * forwarding of unknown unicasts and multicasts. - */ - val = 0x0433; - if (dsa_is_cpu_port(ds, p)) { - if (ds->dst->tag_protocol == htons(ETH_P_EDSA)) - val |= 0x3300; - else - val |= 0x0100; - } - if (ds->dsa_port_mask & (1 << p)) - val |= 0x0100; - if (p == dsa_upstream_port(ds)) - val |= 0x000c; - REG_WRITE(addr, 0x04, val); - - /* - * Port Control 1: disable trunking. Also, if this is the - * CPU port, enable learn messages to be sent to this port. - */ - REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - - /* - * Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the upstream port. - */ - val = (p & 0xf) << 12; - if (dsa_is_cpu_port(ds, p)) - val |= ds->phys_port_mask; - else - val |= 1 << dsa_upstream_port(ds); - REG_WRITE(addr, 0x06, val); - - /* - * Default VLAN ID and priority: don't set a default VLAN - * ID, and set the default packet priority to zero. - */ - REG_WRITE(addr, 0x07, 0x0000); - - /* - * Port Control 2: don't force a good FCS, set the maximum - * frame size to 10240 bytes, don't let the switch add or - * strip 802.1q tags, don't discard tagged or untagged frames - * on this port, do a destination address lookup on all - * received packets as usual, disable ARP mirroring and don't - * send a copy of all transmitted/received frames on this port - * to the CPU. - */ - REG_WRITE(addr, 0x08, 0x2080); - - /* - * Egress rate control: disable egress rate control. - */ - REG_WRITE(addr, 0x09, 0x0001); - - /* - * Egress rate control 2: disable egress rate control. - */ - REG_WRITE(addr, 0x0a, 0x0000); - - /* - * Port Association Vector: when learning source addresses - * of packets, add the address to the address database using - * a port bitmap that has only the bit for this port set and - * the other bits clear. - */ - REG_WRITE(addr, 0x0b, 1 << p); - - /* - * Port ATU control: disable limiting the number of address - * database entries that this port is allowed to use. - */ - REG_WRITE(addr, 0x0c, 0x0000); - - /* - * Priorit Override: disable DA, SA and VTU priority override. - */ - REG_WRITE(addr, 0x0d, 0x0000); - - /* - * Port Ethertype: use the Ethertype DSA Ethertype value. - */ - REG_WRITE(addr, 0x0f, ETH_P_EDSA); - - /* - * Tag Remap: use an identity 802.1p prio -> switch prio - * mapping. - */ - REG_WRITE(addr, 0x18, 0x3210); - - /* - * Tag Remap 2: use an identity 802.1p prio -> switch prio - * mapping. - */ - REG_WRITE(addr, 0x19, 0x7654); - - return 0; -} - -static int mv88e6123_61_65_setup(struct dsa_switch *ds) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int i; - int ret; - - mutex_init(&ps->smi_mutex); - mutex_init(&ps->stats_mutex); - - ret = mv88e6123_61_65_switch_reset(ds); - if (ret < 0) - return ret; - - /* @@@ initialise vtu and atu */ - - ret = mv88e6123_61_65_setup_global(ds); - if (ret < 0) - return ret; - - for (i = 0; i < 6; i++) { - ret = mv88e6123_61_65_setup_port(ds, i); - if (ret < 0) - return ret; - } - - return 0; -} - -static int mv88e6123_61_65_port_to_phy_addr(int port) -{ - if (port >= 0 && port <= 4) - return port; - return -1; -} - -static int -mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum) -{ - int addr = mv88e6123_61_65_port_to_phy_addr(port); - return mv88e6xxx_phy_read(ds, addr, regnum); -} - -static int -mv88e6123_61_65_phy_write(struct dsa_switch *ds, - int port, int regnum, u16 val) -{ - int addr = mv88e6123_61_65_port_to_phy_addr(port); - return mv88e6xxx_phy_write(ds, addr, regnum, val); -} - -static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = { - { "in_good_octets", 8, 0x00, }, - { "in_bad_octets", 4, 0x02, }, - { "in_unicast", 4, 0x04, }, - { "in_broadcasts", 4, 0x06, }, - { "in_multicasts", 4, 0x07, }, - { "in_pause", 4, 0x16, }, - { "in_undersize", 4, 0x18, }, - { "in_fragments", 4, 0x19, }, - { "in_oversize", 4, 0x1a, }, - { "in_jabber", 4, 0x1b, }, - { "in_rx_error", 4, 0x1c, }, - { "in_fcs_error", 4, 0x1d, }, - { "out_octets", 8, 0x0e, }, - { "out_unicast", 4, 0x10, }, - { "out_broadcasts", 4, 0x13, }, - { "out_multicasts", 4, 0x12, }, - { "out_pause", 4, 0x15, }, - { "excessive", 4, 0x11, }, - { "collisions", 4, 0x1e, }, - { "deferred", 4, 0x05, }, - { "single", 4, 0x14, }, - { "multiple", 4, 0x17, }, - { "out_fcs_error", 4, 0x03, }, - { "late", 4, 0x1f, }, - { "hist_64bytes", 4, 0x08, }, - { "hist_65_127bytes", 4, 0x09, }, - { "hist_128_255bytes", 4, 0x0a, }, - { "hist_256_511bytes", 4, 0x0b, }, - { "hist_512_1023bytes", 4, 0x0c, }, - { "hist_1024_max_bytes", 4, 0x0d, }, -}; - -static void -mv88e6123_61_65_get_strings(struct dsa_switch *ds, int port, uint8_t *data) -{ - mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats), - mv88e6123_61_65_hw_stats, port, data); -} - -static void -mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds, - int port, uint64_t *data) -{ - mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats), - mv88e6123_61_65_hw_stats, port, data); -} - -static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds) -{ - return ARRAY_SIZE(mv88e6123_61_65_hw_stats); -} - -struct dsa_switch_driver mv88e6123_61_65_switch_driver = { - .tag_protocol = cpu_to_be16(ETH_P_EDSA), - .priv_size = sizeof(struct mv88e6xxx_priv_state), - .probe = mv88e6123_61_65_probe, - .setup = mv88e6123_61_65_setup, - .set_addr = mv88e6xxx_set_addr_indirect, - .phy_read = mv88e6123_61_65_phy_read, - .phy_write = mv88e6123_61_65_phy_write, - .poll_link = mv88e6xxx_poll_link, - .get_strings = mv88e6123_61_65_get_strings, - .get_ethtool_stats = mv88e6123_61_65_get_ethtool_stats, - .get_sset_count = mv88e6123_61_65_get_sset_count, -}; - -MODULE_ALIAS("platform:mv88e6123"); -MODULE_ALIAS("platform:mv88e6161"); -MODULE_ALIAS("platform:mv88e6165"); diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c deleted file mode 100644 index e0eb68243834..000000000000 --- a/net/dsa/mv88e6131.c +++ /dev/null @@ -1,435 +0,0 @@ -/* - * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support - * Copyright (c) 2008-2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> -#include "mv88e6xxx.h" - -/* - * Switch product IDs - */ -#define ID_6085 0x04a0 -#define ID_6095 0x0950 -#define ID_6131 0x1060 - -static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr) -{ - int ret; - - ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); - if (ret >= 0) { - ret &= 0xfff0; - if (ret == ID_6085) - return "Marvell 88E6085"; - if (ret == ID_6095) - return "Marvell 88E6095/88E6095F"; - if (ret == ID_6131) - return "Marvell 88E6131"; - } - - return NULL; -} - -static int mv88e6131_switch_reset(struct dsa_switch *ds) -{ - int i; - int ret; - - /* - * Set all ports to the disabled state. - */ - for (i = 0; i < 11; i++) { - ret = REG_READ(REG_PORT(i), 0x04); - REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); - } - - /* - * Wait for transmit queues to drain. - */ - msleep(2); - - /* - * Reset the switch. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0xc400); - - /* - * Wait up to one second for reset to complete. - */ - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - if ((ret & 0xc800) == 0xc800) - break; - - msleep(1); - } - if (i == 1000) - return -ETIMEDOUT; - - return 0; -} - -static int mv88e6131_setup_global(struct dsa_switch *ds) -{ - int ret; - int i; - - /* - * Enable the PHY polling unit, don't discard packets with - * excessive collisions, use a weighted fair queueing scheme - * to arbitrate between packet queues, set the maximum frame - * size to 1632, and mask all interrupt sources. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0x4400); - - /* - * Set the default address aging time to 5 minutes, and - * enable address learn messages to be sent to all message - * ports. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); - - /* - * Configure the priority mapping registers. - */ - ret = mv88e6xxx_config_prio(ds); - if (ret < 0) - return ret; - - /* - * Set the VLAN ethertype to 0x8100. - */ - REG_WRITE(REG_GLOBAL, 0x19, 0x8100); - - /* - * Disable ARP mirroring, and configure the upstream port as - * the port to which ingress and egress monitor frames are to - * be sent. - */ - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0); - - /* - * Disable cascade port functionality unless this device - * is used in a cascade configuration, and set the switch's - * DSA device number. - */ - if (ds->dst->pd->nr_chips > 1) - REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f)); - else - REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f)); - - /* - * Send all frames with destination addresses matching - * 01:80:c2:00:00:0x to the CPU port. - */ - REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); - - /* - * Ignore removed tag data on doubly tagged packets, disable - * flow control messages, force flow control priority to the - * highest, and send all special multicast frames to the CPU - * port at the highest priority. - */ - REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); - - /* - * Program the DSA routing table. - */ - for (i = 0; i < 32; i++) { - int nexthop; - - nexthop = 0x1f; - if (i != ds->index && i < ds->dst->pd->nr_chips) - nexthop = ds->pd->rtable[i] & 0x1f; - - REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop); - } - - /* - * Clear all trunk masks. - */ - for (i = 0; i < 8; i++) - REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff); - - /* - * Clear all trunk mappings. - */ - for (i = 0; i < 16; i++) - REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); - - /* - * Force the priority of IGMP/MLD snoop frames and ARP frames - * to the highest setting. - */ - REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff); - - return 0; -} - -static int mv88e6131_setup_port(struct dsa_switch *ds, int p) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int addr = REG_PORT(p); - u16 val; - - /* - * MAC Forcing register: don't force link, speed, duplex - * or flow control state to any particular values on physical - * ports, but force the CPU port and all DSA ports to 1000 Mb/s - * (100 Mb/s on 6085) full duplex. - */ - if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) - if (ps->id == ID_6085) - REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */ - else - REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */ - else - REG_WRITE(addr, 0x01, 0x0003); - - /* - * Port Control: disable Core Tag, disable Drop-on-Lock, - * transmit frames unmodified, disable Header mode, - * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN - * tunneling, determine priority by looking at 802.1p and - * IP priority fields (IP prio has precedence), and set STP - * state to Forwarding. - * - * If this is the upstream port for this switch, enable - * forwarding of unknown unicasts, and enable DSA tagging - * mode. - * - * If this is the link to another switch, use DSA tagging - * mode, but do not enable forwarding of unknown unicasts. - */ - val = 0x0433; - if (p == dsa_upstream_port(ds)) { - val |= 0x0104; - /* - * On 6085, unknown multicast forward is controlled - * here rather than in Port Control 2 register. - */ - if (ps->id == ID_6085) - val |= 0x0008; - } - if (ds->dsa_port_mask & (1 << p)) - val |= 0x0100; - REG_WRITE(addr, 0x04, val); - - /* - * Port Control 1: disable trunking. Also, if this is the - * CPU port, enable learn messages to be sent to this port. - */ - REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - - /* - * Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the upstream port. - */ - val = (p & 0xf) << 12; - if (dsa_is_cpu_port(ds, p)) - val |= ds->phys_port_mask; - else - val |= 1 << dsa_upstream_port(ds); - REG_WRITE(addr, 0x06, val); - - /* - * Default VLAN ID and priority: don't set a default VLAN - * ID, and set the default packet priority to zero. - */ - REG_WRITE(addr, 0x07, 0x0000); - - /* - * Port Control 2: don't force a good FCS, don't use - * VLAN-based, source address-based or destination - * address-based priority overrides, don't let the switch - * add or strip 802.1q tags, don't discard tagged or - * untagged frames on this port, do a destination address - * lookup on received packets as usual, don't send a copy - * of all transmitted/received frames on this port to the - * CPU, and configure the upstream port number. - * - * If this is the upstream port for this switch, enable - * forwarding of unknown multicast addresses. - */ - if (ps->id == ID_6085) - /* - * on 6085, bits 3:0 are reserved, bit 6 control ARP - * mirroring, and multicast forward is handled in - * Port Control register. - */ - REG_WRITE(addr, 0x08, 0x0080); - else { - val = 0x0080 | dsa_upstream_port(ds); - if (p == dsa_upstream_port(ds)) - val |= 0x0040; - REG_WRITE(addr, 0x08, val); - } - - /* - * Rate Control: disable ingress rate limiting. - */ - REG_WRITE(addr, 0x09, 0x0000); - - /* - * Rate Control 2: disable egress rate limiting. - */ - REG_WRITE(addr, 0x0a, 0x0000); - - /* - * Port Association Vector: when learning source addresses - * of packets, add the address to the address database using - * a port bitmap that has only the bit for this port set and - * the other bits clear. - */ - REG_WRITE(addr, 0x0b, 1 << p); - - /* - * Tag Remap: use an identity 802.1p prio -> switch prio - * mapping. - */ - REG_WRITE(addr, 0x18, 0x3210); - - /* - * Tag Remap 2: use an identity 802.1p prio -> switch prio - * mapping. - */ - REG_WRITE(addr, 0x19, 0x7654); - - return 0; -} - -static int mv88e6131_setup(struct dsa_switch *ds) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int i; - int ret; - - mutex_init(&ps->smi_mutex); - mv88e6xxx_ppu_state_init(ds); - mutex_init(&ps->stats_mutex); - - ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0; - - ret = mv88e6131_switch_reset(ds); - if (ret < 0) - return ret; - - /* @@@ initialise vtu and atu */ - - ret = mv88e6131_setup_global(ds); - if (ret < 0) - return ret; - - for (i = 0; i < 11; i++) { - ret = mv88e6131_setup_port(ds, i); - if (ret < 0) - return ret; - } - - return 0; -} - -static int mv88e6131_port_to_phy_addr(int port) -{ - if (port >= 0 && port <= 11) - return port; - return -1; -} - -static int -mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum) -{ - int addr = mv88e6131_port_to_phy_addr(port); - return mv88e6xxx_phy_read_ppu(ds, addr, regnum); -} - -static int -mv88e6131_phy_write(struct dsa_switch *ds, - int port, int regnum, u16 val) -{ - int addr = mv88e6131_port_to_phy_addr(port); - return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val); -} - -static struct mv88e6xxx_hw_stat mv88e6131_hw_stats[] = { - { "in_good_octets", 8, 0x00, }, - { "in_bad_octets", 4, 0x02, }, - { "in_unicast", 4, 0x04, }, - { "in_broadcasts", 4, 0x06, }, - { "in_multicasts", 4, 0x07, }, - { "in_pause", 4, 0x16, }, - { "in_undersize", 4, 0x18, }, - { "in_fragments", 4, 0x19, }, - { "in_oversize", 4, 0x1a, }, - { "in_jabber", 4, 0x1b, }, - { "in_rx_error", 4, 0x1c, }, - { "in_fcs_error", 4, 0x1d, }, - { "out_octets", 8, 0x0e, }, - { "out_unicast", 4, 0x10, }, - { "out_broadcasts", 4, 0x13, }, - { "out_multicasts", 4, 0x12, }, - { "out_pause", 4, 0x15, }, - { "excessive", 4, 0x11, }, - { "collisions", 4, 0x1e, }, - { "deferred", 4, 0x05, }, - { "single", 4, 0x14, }, - { "multiple", 4, 0x17, }, - { "out_fcs_error", 4, 0x03, }, - { "late", 4, 0x1f, }, - { "hist_64bytes", 4, 0x08, }, - { "hist_65_127bytes", 4, 0x09, }, - { "hist_128_255bytes", 4, 0x0a, }, - { "hist_256_511bytes", 4, 0x0b, }, - { "hist_512_1023bytes", 4, 0x0c, }, - { "hist_1024_max_bytes", 4, 0x0d, }, -}; - -static void -mv88e6131_get_strings(struct dsa_switch *ds, int port, uint8_t *data) -{ - mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6131_hw_stats), - mv88e6131_hw_stats, port, data); -} - -static void -mv88e6131_get_ethtool_stats(struct dsa_switch *ds, - int port, uint64_t *data) -{ - mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6131_hw_stats), - mv88e6131_hw_stats, port, data); -} - -static int mv88e6131_get_sset_count(struct dsa_switch *ds) -{ - return ARRAY_SIZE(mv88e6131_hw_stats); -} - -struct dsa_switch_driver mv88e6131_switch_driver = { - .tag_protocol = cpu_to_be16(ETH_P_DSA), - .priv_size = sizeof(struct mv88e6xxx_priv_state), - .probe = mv88e6131_probe, - .setup = mv88e6131_setup, - .set_addr = mv88e6xxx_set_addr_direct, - .phy_read = mv88e6131_phy_read, - .phy_write = mv88e6131_phy_write, - .poll_link = mv88e6xxx_poll_link, - .get_strings = mv88e6131_get_strings, - .get_ethtool_stats = mv88e6131_get_ethtool_stats, - .get_sset_count = mv88e6131_get_sset_count, -}; - -MODULE_ALIAS("platform:mv88e6085"); -MODULE_ALIAS("platform:mv88e6095"); -MODULE_ALIAS("platform:mv88e6095f"); -MODULE_ALIAS("platform:mv88e6131"); diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c deleted file mode 100644 index 5467c040824a..000000000000 --- a/net/dsa/mv88e6xxx.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support - * Copyright (c) 2008 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> -#include "mv88e6xxx.h" - -/* - * If the switch's ADDR[4:0] strap pins are strapped to zero, it will - * use all 32 SMI bus addresses on its SMI bus, and all switch registers - * will be directly accessible on some {device address,register address} - * pair. If the ADDR[4:0] pins are not strapped to zero, the switch - * will only respond to SMI transactions to that specific address, and - * an indirect addressing mechanism needs to be used to access its - * registers. - */ -static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr) -{ - int ret; - int i; - - for (i = 0; i < 16; i++) { - ret = mdiobus_read(bus, sw_addr, 0); - if (ret < 0) - return ret; - - if ((ret & 0x8000) == 0) - return 0; - } - - return -ETIMEDOUT; -} - -int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg) -{ - int ret; - - if (sw_addr == 0) - return mdiobus_read(bus, addr, reg); - - /* - * Wait for the bus to become free. - */ - ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); - if (ret < 0) - return ret; - - /* - * Transmit the read command. - */ - ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg); - if (ret < 0) - return ret; - - /* - * Wait for the read command to complete. - */ - ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); - if (ret < 0) - return ret; - - /* - * Read the data. - */ - ret = mdiobus_read(bus, sw_addr, 1); - if (ret < 0) - return ret; - - return ret & 0xffff; -} - -int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int ret; - - mutex_lock(&ps->smi_mutex); - ret = __mv88e6xxx_reg_read(ds->master_mii_bus, - ds->pd->sw_addr, addr, reg); - mutex_unlock(&ps->smi_mutex); - - return ret; -} - -int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, - int reg, u16 val) -{ - int ret; - - if (sw_addr == 0) - return mdiobus_write(bus, addr, reg, val); - - /* - * Wait for the bus to become free. - */ - ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); - if (ret < 0) - return ret; - - /* - * Transmit the data to write. - */ - ret = mdiobus_write(bus, sw_addr, 1, val); - if (ret < 0) - return ret; - - /* - * Transmit the write command. - */ - ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg); - if (ret < 0) - return ret; - - /* - * Wait for the write command to complete. - */ - ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); - if (ret < 0) - return ret; - - return 0; -} - -int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int ret; - - mutex_lock(&ps->smi_mutex); - ret = __mv88e6xxx_reg_write(ds->master_mii_bus, - ds->pd->sw_addr, addr, reg, val); - mutex_unlock(&ps->smi_mutex); - - return ret; -} - -int mv88e6xxx_config_prio(struct dsa_switch *ds) -{ - /* - * Configure the IP ToS mapping registers. - */ - REG_WRITE(REG_GLOBAL, 0x10, 0x0000); - REG_WRITE(REG_GLOBAL, 0x11, 0x0000); - REG_WRITE(REG_GLOBAL, 0x12, 0x5555); - REG_WRITE(REG_GLOBAL, 0x13, 0x5555); - REG_WRITE(REG_GLOBAL, 0x14, 0xaaaa); - REG_WRITE(REG_GLOBAL, 0x15, 0xaaaa); - REG_WRITE(REG_GLOBAL, 0x16, 0xffff); - REG_WRITE(REG_GLOBAL, 0x17, 0xffff); - - /* - * Configure the IEEE 802.1p priority mapping register. - */ - REG_WRITE(REG_GLOBAL, 0x18, 0xfa41); - - return 0; -} - -int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr) -{ - REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]); - REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]); - REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]); - - return 0; -} - -int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr) -{ - int i; - int ret; - - for (i = 0; i < 6; i++) { - int j; - - /* - * Write the MAC address byte. - */ - REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]); - - /* - * Wait for the write to complete. - */ - for (j = 0; j < 16; j++) { - ret = REG_READ(REG_GLOBAL2, 0x0d); - if ((ret & 0x8000) == 0) - break; - } - if (j == 16) - return -ETIMEDOUT; - } - - return 0; -} - -int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum) -{ - if (addr >= 0) - return mv88e6xxx_reg_read(ds, addr, regnum); - return 0xffff; -} - -int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val) -{ - if (addr >= 0) - return mv88e6xxx_reg_write(ds, addr, regnum, val); - return 0; -} - -#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU -static int mv88e6xxx_ppu_disable(struct dsa_switch *ds) -{ - int ret; - int i; - - ret = REG_READ(REG_GLOBAL, 0x04); - REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000); - - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - msleep(1); - if ((ret & 0xc000) != 0xc000) - return 0; - } - - return -ETIMEDOUT; -} - -static int mv88e6xxx_ppu_enable(struct dsa_switch *ds) -{ - int ret; - int i; - - ret = REG_READ(REG_GLOBAL, 0x04); - REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000); - - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - msleep(1); - if ((ret & 0xc000) == 0xc000) - return 0; - } - - return -ETIMEDOUT; -} - -static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly) -{ - struct mv88e6xxx_priv_state *ps; - - ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work); - if (mutex_trylock(&ps->ppu_mutex)) { - struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1; - - if (mv88e6xxx_ppu_enable(ds) == 0) - ps->ppu_disabled = 0; - mutex_unlock(&ps->ppu_mutex); - } -} - -static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps) -{ - struct mv88e6xxx_priv_state *ps = (void *)_ps; - - schedule_work(&ps->ppu_work); -} - -static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int ret; - - mutex_lock(&ps->ppu_mutex); - - /* - * If the PHY polling unit is enabled, disable it so that - * we can access the PHY registers. If it was already - * disabled, cancel the timer that is going to re-enable - * it. - */ - if (!ps->ppu_disabled) { - ret = mv88e6xxx_ppu_disable(ds); - if (ret < 0) { - mutex_unlock(&ps->ppu_mutex); - return ret; - } - ps->ppu_disabled = 1; - } else { - del_timer(&ps->ppu_timer); - ret = 0; - } - - return ret; -} - -static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - - /* - * Schedule a timer to re-enable the PHY polling unit. - */ - mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10)); - mutex_unlock(&ps->ppu_mutex); -} - -void mv88e6xxx_ppu_state_init(struct dsa_switch *ds) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - - mutex_init(&ps->ppu_mutex); - INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work); - init_timer(&ps->ppu_timer); - ps->ppu_timer.data = (unsigned long)ps; - ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer; -} - -int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum) -{ - int ret; - - ret = mv88e6xxx_ppu_access_get(ds); - if (ret >= 0) { - ret = mv88e6xxx_reg_read(ds, addr, regnum); - mv88e6xxx_ppu_access_put(ds); - } - - return ret; -} - -int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr, - int regnum, u16 val) -{ - int ret; - - ret = mv88e6xxx_ppu_access_get(ds); - if (ret >= 0) { - ret = mv88e6xxx_reg_write(ds, addr, regnum, val); - mv88e6xxx_ppu_access_put(ds); - } - - return ret; -} -#endif - -void mv88e6xxx_poll_link(struct dsa_switch *ds) -{ - int i; - - for (i = 0; i < DSA_MAX_PORTS; i++) { - struct net_device *dev; - int uninitialized_var(port_status); - int link; - int speed; - int duplex; - int fc; - - dev = ds->ports[i]; - if (dev == NULL) - continue; - - link = 0; - if (dev->flags & IFF_UP) { - port_status = mv88e6xxx_reg_read(ds, REG_PORT(i), 0x00); - if (port_status < 0) - continue; - - link = !!(port_status & 0x0800); - } - - if (!link) { - if (netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link down\n", dev->name); - netif_carrier_off(dev); - } - continue; - } - - switch (port_status & 0x0300) { - case 0x0000: - speed = 10; - break; - case 0x0100: - speed = 100; - break; - case 0x0200: - speed = 1000; - break; - default: - speed = -1; - break; - } - duplex = (port_status & 0x0400) ? 1 : 0; - fc = (port_status & 0x8000) ? 1 : 0; - - if (!netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " - "flow control %sabled\n", dev->name, - speed, duplex ? "full" : "half", - fc ? "en" : "dis"); - netif_carrier_on(dev); - } - } -} - -static int mv88e6xxx_stats_wait(struct dsa_switch *ds) -{ - int ret; - int i; - - for (i = 0; i < 10; i++) { - ret = REG_READ(REG_GLOBAL, 0x1d); - if ((ret & 0x8000) == 0) - return 0; - } - - return -ETIMEDOUT; -} - -static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port) -{ - int ret; - - /* - * Snapshot the hardware statistics counters for this port. - */ - REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port); - - /* - * Wait for the snapshotting to complete. - */ - ret = mv88e6xxx_stats_wait(ds); - if (ret < 0) - return ret; - - return 0; -} - -static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val) -{ - u32 _val; - int ret; - - *val = 0; - - ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1d, 0xcc00 | stat); - if (ret < 0) - return; - - ret = mv88e6xxx_stats_wait(ds); - if (ret < 0) - return; - - ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1e); - if (ret < 0) - return; - - _val = ret << 16; - - ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1f); - if (ret < 0) - return; - - *val = _val | ret; -} - -void mv88e6xxx_get_strings(struct dsa_switch *ds, - int nr_stats, struct mv88e6xxx_hw_stat *stats, - int port, uint8_t *data) -{ - int i; - - for (i = 0; i < nr_stats; i++) { - memcpy(data + i * ETH_GSTRING_LEN, - stats[i].string, ETH_GSTRING_LEN); - } -} - -void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, - int nr_stats, struct mv88e6xxx_hw_stat *stats, - int port, uint64_t *data) -{ - struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); - int ret; - int i; - - mutex_lock(&ps->stats_mutex); - - ret = mv88e6xxx_stats_snapshot(ds, port); - if (ret < 0) { - mutex_unlock(&ps->stats_mutex); - return; - } - - /* - * Read each of the counters. - */ - for (i = 0; i < nr_stats; i++) { - struct mv88e6xxx_hw_stat *s = stats + i; - u32 low; - u32 high; - - mv88e6xxx_stats_read(ds, s->reg, &low); - if (s->sizeof_stat == 8) - mv88e6xxx_stats_read(ds, s->reg + 1, &high); - else - high = 0; - - data[i] = (((u64)high) << 32) | low; - } - - mutex_unlock(&ps->stats_mutex); -} - -static int __init mv88e6xxx_init(void) -{ -#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131) - register_switch_driver(&mv88e6131_switch_driver); -#endif -#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) - register_switch_driver(&mv88e6123_61_65_switch_driver); -#endif - return 0; -} -module_init(mv88e6xxx_init); - -static void __exit mv88e6xxx_cleanup(void) -{ -#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) - unregister_switch_driver(&mv88e6123_61_65_switch_driver); -#endif -#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131) - unregister_switch_driver(&mv88e6131_switch_driver); -#endif -} -module_exit(mv88e6xxx_cleanup); - -MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); -MODULE_DESCRIPTION("Driver for Marvell 88E6XXX ethernet switch chips"); -MODULE_LICENSE("GPL"); diff --git a/net/dsa/mv88e6xxx.h b/net/dsa/mv88e6xxx.h deleted file mode 100644 index fc2cd7b90e8d..000000000000 --- a/net/dsa/mv88e6xxx.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support - * Copyright (c) 2008 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __MV88E6XXX_H -#define __MV88E6XXX_H - -#define REG_PORT(p) (0x10 + (p)) -#define REG_GLOBAL 0x1b -#define REG_GLOBAL2 0x1c - -struct mv88e6xxx_priv_state { - /* - * When using multi-chip addressing, this mutex protects - * access to the indirect access registers. (In single-chip - * mode, this mutex is effectively useless.) - */ - struct mutex smi_mutex; - -#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU - /* - * Handles automatic disabling and re-enabling of the PHY - * polling unit. - */ - struct mutex ppu_mutex; - int ppu_disabled; - struct work_struct ppu_work; - struct timer_list ppu_timer; -#endif - - /* - * This mutex serialises access to the statistics unit. - * Hold this mutex over snapshot + dump sequences. - */ - struct mutex stats_mutex; - - int id; /* switch product id */ -}; - -struct mv88e6xxx_hw_stat { - char string[ETH_GSTRING_LEN]; - int sizeof_stat; - int reg; -}; - -int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg); -int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg); -int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, - int reg, u16 val); -int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val); -int mv88e6xxx_config_prio(struct dsa_switch *ds); -int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr); -int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr); -int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum); -int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val); -void mv88e6xxx_ppu_state_init(struct dsa_switch *ds); -int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum); -int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr, - int regnum, u16 val); -void mv88e6xxx_poll_link(struct dsa_switch *ds); -void mv88e6xxx_get_strings(struct dsa_switch *ds, - int nr_stats, struct mv88e6xxx_hw_stat *stats, - int port, uint8_t *data); -void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, - int nr_stats, struct mv88e6xxx_hw_stat *stats, - int port, uint64_t *data); - -extern struct dsa_switch_driver mv88e6131_switch_driver; -extern struct dsa_switch_driver mv88e6123_61_65_switch_driver; - -#define REG_READ(addr, reg) \ - ({ \ - int __ret; \ - \ - __ret = mv88e6xxx_reg_read(ds, addr, reg); \ - if (__ret < 0) \ - return __ret; \ - __ret; \ - }) - -#define REG_WRITE(addr, reg, val) \ - ({ \ - int __ret; \ - \ - __ret = mv88e6xxx_reg_write(ds, addr, reg, val); \ - if (__ret < 0) \ - return __ret; \ - }) - - - -#endif |