2003-01-10 Ken Raeburn * lib.in (LN_S, AR, LIBLIST, LIBLINKS, LIBINSTLIST, STLIBEXT, SHLIBVEXT, SHLIBSEXT, SHLIBEXT, PFLIBEXT, LDCOMBINE, LDCOMBINE_TAIL, SHLIB_EXPFLAGS): Move these autoconf-substituted variables... * libobj.in (OBJLISTS, SHLIBOBJS, PFLIBOBJS, LDCOMBINE, SONAME, PICFLAGS, PROFFLAGS): ...and these... * pre.in: ...to here. 2002-12-23 Tom Yu * pre.in: Add variables for krb524 and krb4 generated headers for dependencies. 2002-12-12 Tom Yu * post.in: Fix depend rules to keep state about whether verification of various things succeeded. Change some double colons to single colons. Add a new depend-dependencies target to allow Makefile.in to specify things that must be built for depend to work. * pre.in: Fix recursion rules to use fewer double colons. 2002-12-09 Tom Yu * post.in: depfix2.sed -> .depfix2.sed to avoid a little clutter. 2002-11-27 Tom Yu * post.in (clean-unix): Clean depfix2.sed as well. 2002-11-13 Ezra Peisach * pre.in (AUTOCONFINCFLAGS): Define by configure. * post.in (Makefile): Invoke autoconf with AUTOCONFINCFLAGS instead of hardcoding --localdir. 2002-11-12 Tom Yu * shlib.conf: Fix AIX to explicitly include system libraries in "-blibpath:" by adding a variable RPATH_TAIL. Fix typo in non-gcc case. 2002-11-08 Ken Raeburn * pre.in (.et.h, .et.c): Drop "set -x". 2002-11-04 Tom Yu * pre.in: New variables RPATH_FLAG (set regardless of whether we're building shared), TCL_MAYBE_RPATH (empty unless we're building static and are capable of shared libs, in case there's a shared tcl lib). * shlib.conf: New variable RPATH_FLAG. 2002-10-07 Sam Hartman * pre.in post.in (RECURSE_TARGETS): Add install-headers-recurse 2002-09-24 Ezra Peisach * post.in (Makefile): Run config.status to generate only the specific makefile that changed. 2002-09-24 Ken Raeburn * pre.in (.et.c, .et.h): Change rules to only update the desired target file, by using temporary files; this makes them safe for use in parallel builds. 2002-09-19 Ezra Peisach * post.in (Makefile): Revert change until aclocal.m4 fixed. 2002-09-19 Ezra Peisach * post.in (Makefile): Run config.status to generate only the specific makefile that changed. 2002-09-19 Ken Raeburn * post.in ($(srcdir)/$(thisconfigdir)/configure): Delete autom4te.cache directory. 2002-09-13 Ken Raeburn * pre.in (KRB5_LIB_libopt, KRB5_LIB_frameworkopt, K5CRYPTO_LIB_libopt, K5CRYPTO_LIB_frameworkopt, GSS_KRB5_LIB_libopt, GSS_KRB5_LIB_frameworkopt): Variables deleted. (KRB5_LIB, K5CRYPTO_LIB, GSS_KRB5_LIB): Use old _libopt values. * lib.in (EXTRA_CLEAN_TARGETS, EXTRA_CLEAN_LINKS): Variables deleted. (clean-libs, clean-liblinks): Don't depend on them. (all-framework, link-framework, clean-framework, clean-framework-link, install-framework): Placeholder targets deleted. * shlib.conf: Don't define LIB_LINK_OPT, EXTRA_LIB_TARGETS, EXTRA_LIBLINK_TARGETS, EXTRA_LIBINST_TARGETS, EXTRA_CLEAN_TARGETS, EXTRA_CLEAN_LINKS. * post.in (depend-verify-et-sys, depend-verify-et-k5, depend-verify-ss-sys, depend-verify-ss-k5, depend-verify-db-sys, depend-verify-db-k5): New targets. Report errors in the -sys versions. (depend-verify-et, depend-verify-ss, depend-verify-db): New targets. Depend on the above based on the _VERSION macro corresponding. (depend-verify-srcdir): New target, split out from .d rules. (.d): Depend on depend-verify-{et,ss,db,srcdir}. (depend-verify-gcc, depend-verify-gcc-yes, depend-verify-gcc-no): Report an error if not using gcc. (depfix2.sed): Depend on depend-verify-gcc. Supply libgcc file name as fifth input field to depgen.sed. * pre.in (DB_DEPLIB-k5, DB_DEPLIB-sys, DB_DEPS-sys, DB_DEPS-k5, DB_DEPS-redirect): New variables. (DB_DEPLIB, DB_DEPS): Select from them. (DB_LIB): Substitute from configure script. (COM_ERR_VERSION, SS_VERSION, DB_VERSION): New variables. 2002-09-10 Ken Raeburn * post.in (depfix2.sed): Pass srcdir and BUILDTOP as additional inputs to depgen.sed. Don't emit any other text. 2002-09-03 Ken Raeburn * libobj.in (.c.so, .c.po): Put LOCALINCLUDES before CPPFLAGS. * pre.in (ALL_CFLAGS): Put LOCALINCLUDES before CPPFLAGS. (SS_LIB-sys): Use @SS_LIB@ substitution. 2002-08-29 Ken Raeburn * pre.in (COM_ERR_DEPLIB-sys, COM_ERR_DEPLIB-k5, SS_DEPLIB-k5, SS_DEPLIB-sys, COM_ERR_DEPS-sys, COM_ERR_DEPS-k5, SS_DEPS-sys, SS_DEPS-k5, SS_LIB-sys, SS_LIB-k5, COMPILE_ET-sys, COMPILE_ET-k5, MAKE_COMMANDS-sys, MAKE_COMMANDS-k5): New variables. (COM_ERR_DEPLIB, SS_DEPLIB, COM_ERR_DEPS, SS_DEPS, SS_LIB, COMPILE_ET, MAKE_COMMANDS): Use them, selecting using new configure substitutions. (COM_ERR_LIB): Always define as -lcom_err. (CFLAGS): Define using @CFLAGS@, not @CCOPTS@. * win-pre.in (COM_ERR_DEPS): New variable. * shlib.conf: Use $(LDFLAGS) in CC_LINK_SHARED and CC_LINK_STATIC, after other options. * pre.in (S): Variable restored. (ABS): Variable deleted. (SS_DEPS): New variable. 2002-08-26 Ezra Peisach * pre.in: Set host to @krb5_cv_host@ instead of @host@. The way aclocal.m4 is setup, AC_CANONICAL_HOST may only be evaluated as a cached variable and autoconf 2.52 will only allow one inclusion of the code. 2002-08-23 Ken Raeburn * pre.in (S, U): Variables deleted. 2002-08-14 Ken Raeburn * lib.in ($(SUBDIROBJLISTS) and .SH/.PF variants): Depend on recursion. Use extra dummy target in case the variable is empty. * post.in (ALL_DEP_SRCS): New variable, includes SRCS and EXTRADEPSRCS. (.d): Depend on and use $(ALL_DEP_SRCS). * pre.in (all-unix, all-recurse, all-postrecurse): Make each stage depend on the previous, rather than having all-unix depend on each. 2002-07-17 Ken Raeburn * pre.in (DYN_DEPLIB): Removed. (GSSRPC_DEPLIBS, GSSRPC_LIBS): Drop libdyn references. 2002-07-13 Tom Yu * pre.in (PTY_DEPLIB): Fix to reflect always being built static. 2002-07-12 Ken Raeburn * pre.in (KRB5_INCSUBDIRS): Don't create the asn.1 subdirectory. 2002-06-25 Ken Raeburn * pre.in (UTIL_DEPLIB, UTIL_LIB): Variables deleted. 2002-06-15 Ken Raeburn * pre.in (COM_ERR_DEPS): New variable. * post.in (clean-unix): Delete .d and .depend files along with $(OBJS) in one command, to avoid needing to test whether the latter is empty. 2002-04-10 Danilo Almeida * win-pre.in: Define KRB5_PRIVATE=1 so that private definitions are used. Define WIN32_LEAN_AND_MEAN so there are no Winsock vs. Winsock 2 header file issues. (Winsock 2 is needed for IPv6 support.) 2002-04-02 Tom Yu * pre.in: Add support for doing optional stripping of programs. 2002-03-26 Ken Raeburn * move-if-changed: New script. * post.in (depend-postrecurse): Use it. 2002-01-08 Ken Raeburn * shlib.conf: For Linux, always add "-lc" at the end of the link command. * libobj.in (config.status): Depend on shlib.conf. 2001-12-18 Tom Yu * shlib.conf: Fix hpux to deal with building shared libs with gcc. Patch from Doug Engert; fixes krb5-build/1021. 2001-10-20 Ken Raeburn * post.in (DEPLIBOBJNAMEFIX): New variable. (.depend): If $(STLIBOBJS) is non-empty, filter dependency info through $(DEPLIBOBJNAMEFIX). 2001-10-11 Tom Yu * post.in: Minor tidying. Make the target of the mondo recursion rule commands be the variable $(RECURSE_TARGETS). 2001-09-06 Ken Raeburn * post.in (depfix2.sed): New target, generates a sed script that'll do a better job of identifying possible $(SRCTOP) uses. Collapse multiple slashes to one. Uses new depgen.sed script. (.depend): Use it. 2001-09-01 Ken Raeburn * post.in (.d): Run compiler as a separate target from sed processing. Refuse to do anything if srcdir is ".". (.depend): Find a shortcut name for SRCTOP to eliminate "foo/.." subsequences, in case the compiler does the same. Run depfix.sed after the directory-specific substitutions, not before. (depend-postrecurse): Renamed from old "depend" target. (depend, depend-prerecurse, depend-recurse): Make "depend" processing recursive. 2001-08-07 Ezra Peisach * post.in (all-recurse clean-recurse distclean-recurse install-recurse check-recurse Makefiles-recurse): Do not pass down CC and CCOPTS to subdirs. This causes automatic reconfiguration to fail with autoconf 2.52 where config.status is invoked with different environment variables. 2001-07024 Jeffrey Altman * win-pre.in: the proper #define is KRB5_DNS_LOOKUP_REALM and not KRB5_DNS_LOOKUP_REALMS 2001-07-23 Danilo Almeida * win-pre.in, win-post.in: Move rule-printing code to win-post.in so we get the correct build options displayed (i.e., the options as they stand after parsing Makefile.in). 2001-06-22 Danilo Almeida * win-pre.in: Minimize printing of compiler command line during build of a directory. 2001-06-21 Danilo Almeida * win-pre.in, win-post.in: Improve output directory creation and cleanup. 2001-06-18 Ezra Peisach * pre.in (KADM_COMM_DEPLIBS): Depend on GSSRPC_DEPLIBS and not UTIL_DEPLIB. (KADMSRC_DEPLIBS) add dependency on KDB5_DEPLIB. 2001-06-06 Ken Raeburn * pre.in (AUTOHEADER, AUTOHEADERFLAGS): New variables. 2001-05-10 Tom Yu * shlib.conf: Fix RUN_ENV for Irix. [pulled up from 1.2.2] 2001-01-28 Tom Yu * shlib.conf: We don't need aix.bincmds anymore for AIX. Use the -blibpath flag instead. 2001-01-17 Ken Raeburn * pre.in (COMPILE_ET): New variable. (COMPILE_ET_H, COMPILE_ET_C): Deleted. (.et.h, .et.c): Use $(COMPILE_ET) instead of invoking awk explicitly. 2000-10-27 Ezra Peisach * post.in (Makefile): When running autoconf, use AUTOCONFFLAGS instead of always specificying the trees macrodir. * pre.in (AUTOCONFFLAGS): Add as flags to pass to autoconf. 2000-08-30 Tom Yu * pre.in: Fix some inconsistent spelling in the previous changes for MacOS X lib framework support, especially in the *_LIB and *_LIB_*opt variables. 2000-08-30 Ken Raeburn * lib.in (EXTRA_CLEAN_TARGETS, EXTRA_CLEAN_LINKS): New variables. (clean-libs, clean-liblinks): Depend on targets specified in those variables. (config.status): Depend on shlib.conf. (all-framework, link-framework, clean-framework, clean-framework-link, install-framework): New targets, details to be filled in later. * pre.in (KRB5_LIB_libopt): Renamed from KDB5_LIB. (KRB5_LIB_frameworkopt): Tentative framework version for Mac OS X, details to be tuned later. (KRB5_LIB): Select between them using @LIB_LINK_OPT@. (KRB5CRYPTO_LIB*, COM_ERR_LIB*, GSS_KRB5_LIB*): Similarly. (KRB5_BASE_LIBS, GSS_LIBS): Use them. (KRB4COMPAT_LIBS): Use KRB5_BASE_LIBS. * shlib.conf: Set LIB_LINK_OPT. Set new EXTRA_* variables for darwin target. 2000-08-29 Tom Yu * post.in: Test for existing Makefile in directory before recursing into it. 2000-08-23 Ken Raeburn * libobj.in (clean-libobjs): Combine "rm" commands into one. 2000-07-20 Danilo Almeida * win-pre.in: Add KRB4_INCLUDES definition. 2000-07-14 Ken Raeburn * shlib.conf: New file, taken from KRB5_LIB_PARAMS in ../aclocal.m4. 2000-07-03 Ezra Peisach * pre.in: Remove the kdb5 and db libraries from the common application list but list them for server applications. 2000-07-01 Tom Yu * lib.in: Fix up lib build rules to deal properly (hopefuly) with empty objlist files. 2000-06-30 Danilo Almeida * win-pre.in: Fix up DNS build flags to correspond to new DNS build flags. Add support for not using wshelper. 2000-06-30 Tom Yu * pre.in: Twiddle things around to support building libdb under krb5 build system. 2000-06-08 Tom Yu * config.guess: Update to 2000-05-30 from FSF. * config.sub: Update to 2000-05-30 from FSF. 2000-05-03 Tom Yu * libobj.in, pre.in: Put $(LOCALINCLUDES) after $(CPPFLAGS) since $(CPPFLAGS) should have its includes show up first. 2000-03-01 Tom Yu * pre.in (INSTALL_SHLIB): New variable. * lib.in (install-shared): Use $(INSTALL_SHLIB) 2000-02-15 Tom Yu * libobj.in: Fix up .c.so and .c.po rules to include $(CFLAGS), which were previously missing. 2000-02-04 Tom Yu * pre.in: Add KRB524_DEPLIB and KRB524_LIB 2000-01-27 Ken Raeburn * pre.in (KADM_COMM_LIBS): Drop krb5util library. 1999-12-03 Danilo Almeida * win-pre.in: Pull changes from krb5-1-1 branch: a) Make is so that all C flags are the same and so that the only difference between EXE and DLL builds are the DLL_LINKOPTS and EXE_LINKOPTS linker options. b) Fix DNS error messages to wshelper instead of version server. c) Fix DNS flags it does not try to depend on mit dir. Define NULL so we can do directory existence checks via the shell under both NT and 9x. 1999-10-26 Wilfredo Sanchez * Makefile.in: Clean up usage of CFLAGS, CPPFLAGS, DEFS, DEFINES, LOCAL_INCLUDES such that one can override CFLAGS from the command line without losing CPP search patchs and defines. Some associated Makefile cleanup. 1999-09-01 Ken Raeburn * config.guess: Recognize Rhapsody OS. * config.sub: Recognize OS name "rhapsody*". * post.in (*-recurse): If an error occurs when using -k, report an error after finishing all the subdirectories. 1999-08-13 Brad Thompson * config.sub: Now recognizes MacOS 10 as a valid OS. 1999-07-30 Ken Raeburn * config.guess: Add MacOS 10 support. (Submitted to autoconf maintainers.) 1999-07-22 Tom Yu * mkinstalldirs: New file; from autoconf-2.13. * config.guess, config.sub, install-sh: Update from autoconf-2.13. Tue May 18 20:06:01 1999 Danilo Almeida * win-pre.in, win-pre.in: Remove trailing backslash from output dir target in rule so rule is not always invoked if it already exists. Add MIGNORE option if we really want make to ignore errors from recursive invocations of make. Move definition of WCONFIG and WCONFIG_EXE into win-pre.in. Add NO_OUTDIR as synonym for NO_OUTPRE. Mon May 17 20:45:05 1999 Danilo Almeida * win-post.in, win-pre.in, windows.in: Rename windows.in to win-pre.in. Mon May 17 12:26:12 1999 Danilo Almeida * windows.in, win-post.in: Remove win16 stuff. Add Win9x-compatible output directory creation. Add more thorough cleanup of output files and directories. Use latest and greatest (MSVC 6.0) debug flag. Mon May 10 15:03:28 1999 Danilo Almeida * windows.in, win-post.in: Build win32 binaries in obj/$(CPU)/{dbg,rel}. 1999-03-31 Theodore Ts'o * post.in (Makefile): Don't try to run autoconf with $(SHELL), since this doesn't work if $(AUTOCONF) isn't a path to the built-in autoconf, but just an unqualified pathname to the system autoconf. [krb5-build/707] 1999-02-19 Theodore Ts'o * windows.in (DLL_FILE_DEF): Add makefile controls to set either KRB5_DLL_FILE or GSS_DLL_FILE, with the default being KRB5_DLL_FILE. Mon Feb 8 22:13:23 1999 Theodore Y. Ts'o * winexclude.sed: Add .dll and .lib files to the list of functions which shouldn't get included in the non-binary list of files to be added to kerbsrc.zip for the Windows build. (If .dll or .lib files need to be included in the zip file, they must be added to the WINBINARYFILES macro in the top-level Makefile.in) 1998-11-13 Theodore Ts'o * post.in (*-recurse): If $(MY_SUBDIRS) is non-NULL use it instead of $(SUBDIRS) to control which directories are iterated over. (This is needed so we can fold a directory's configure.in scripts into the parent's configure.in without having to move all of its siblings as well into the parent directory's configure.in. This is because if the parent's configure.in file as a AC_CONFIG_DIRS macro, it gets included into all the $(SUBDIRS) macro of *all* of its generated makefiles, and this is wrong for all but the Makefile.in of the parent directory. For example, if the configure.in in src/appl contains AC_CONFIG_DIRS(bsd telnet gssftp), and that configure script also generates the Makefile.in for src/appl/sample, then SUBDIRS will contain "bsd telnet gssftp" plus whatever LOCAL_SUBDIRS is defined to contain. This doesn't work. So instead of defining LOCAL_SUBDIRS, the Makefile.in in src/appl/sample defines MY_SUBDIRS, which completely overrides the SUBDIRS macro. Eventually, we should replace all of the LOCAL_SUBDIRS definitions in the Makefile.in's with MY_SUBDIRS, and add MY_SUBDIRS definitions into all Makefile.in's that don't currently have then, and depend on AC_CONFIG_SUBDIRS to insert the right magic value into SUBDIRS. At that point, we can get rid of the SUBDIR definition in pre.in, and remove this test from post.in which tests of MY_SUBDIRS and uses it in preference to SUBDIRS, and simply always use MY_SUBDIRS.) 1998-05-27 Theodore Ts'o * windows.in: Remove -DLEHMAN, which doesn't do anything. (A grep through the whole source tree shows no instances of #ifdef LEHMAN) Sun May 24 21:39:49 1998 Theodore Y. Ts'o * windows.in (ABS,S,C): Use double backslashes for the path separators to workaround Microsoft NMAKE brain damaging. Sometimes backslashes are treated as a quoting characters, and sometimes not, with no rhyme or reason that I can determine. Fortunatelly double backslashes in pathanmes don't seem to hurt (for the times when the backslash isn't treated as a quoating character). Whoever decided Windows should use backslash as a path separator should be shot. Wed Apr 15 18:01:39 1998 Tom Yu * pre.in (CRYPTO_DEPLIB): (KRB5_BASE_LIBS): (KRB4COMPAT_LIBS): Rename; libcrypto -> libk5crypto. Sun Mar 1 22:25:34 1998 Theodore Ts'o * pre.in: Define AUTOCONF and CONFIG_RELTOPDIR from the autoconf substitution macros. * post.in: Fix the call to autoconf to use $(AUTOCONF) and $(CONFIG_RELTOPDIR), so that configure regeneration rule works even in a subdirectory below the configure script. Wed Feb 18 17:31:52 1998 Tom Yu * windows.in: Rewrite some of the directory syntax. * pre.in: Rewrite some of the directory syntax. * mac-pre.in: Rewrite some of the directory syntax. Fri Feb 13 22:16:51 1998 Theodore Y. Ts'o * config.guess, config.sub: Applied lxs's changes to add support for Rhapsody DR1. Mon Feb 2 17:02:29 1998 Theodore Ts'o * pre.in: SUBDIRS now also includes LOCAL_SUBDIRS, which is defined in the Makefile.in to control the recursive descent through the subdirectories. This is used so that the subdirectories can be defined in Makefile.in, instead of in the individual configure.in files. Tue Nov 18 19:20:59 1997 Tom Yu * pre.in: Clean up up .ct.c rule. * lib.in (clean-libs): Remove lib$(LIB)$(SHLIBSEXT) as well. Mon Oct 20 14:27:19 1997 Theodore Y. Ts'o * pre.in (INSTALL_SETUID): Explicitly set the owner of the files which are installed setuid root. Wed Aug 6 20:23:32 1997 Tom Yu * pre.in: Add $(HESIOD_LIBS) to KADMSRV_LIBS. Sun Mar 9 22:28:34 1997 Tom Yu * lib.in: Add provisions for making shared libraries of the same major version number compatible. Sun Mar 2 19:54:26 1997 Ezra Peisach * pre.in (KRB4COMPAT_DEPLIBS): Depends on KRB5_BASE_DEPLIBS (not KRB5_BASE_DEPLBS) Sat Mar 1 14:33:21 1997 Tom Yu * libobj.in: Change .c.so and .c.po rules to work better with compilers that insist that $(CC) -fpic -c foo.c -o foo.so is wrong; basically, cheat and do -o foo.so.o, etc. Thu Feb 27 17:40:51 1997 Tom Yu * pre.in: Add recursion hooks for distclean. * post.in: Change recursion rules to skip recursion if NORECURSE is non-null; add distclean support; don't remove config.log, etc. if not doing distclean. Sat Feb 22 18:42:32 1997 Richard Basch * win-post.in: Move library list file rule from various Makefile.in files to win-post.in Mon Feb 17 19:29:27 1997 Richard Basch * windows.in: Define K4LIB as the krb4 library Fri Feb 14 22:02:33 1997 Richard Basch * windows.in: Define CLIB as the ComErr library (now separate lib) Mon Feb 10 08:39:10 1997 Tom Yu * post.in: Fix recursion rules to deal with Ultrix sh lossage. * libobj.in: Remove instances of STAMP.*, since they aren't actually necessary. Sun Feb 9 13:43:42 1997 Tom Yu * libobj.in (OBJS.*): Work around a gmake optimization where the timestamps of OBJS.* would not get checked after STAMP.* get updated, even though OBJS.* get updated as a side effect. Sat Feb 8 12:17:17 1997 Richard Basch * windows.in: Define WLIB (winsock library) for Win16. Fri Feb 7 08:44:32 1997 Richard Basch * windows.in: Compile win16 non-DLL objects with /GA to add the appropriate Windows prolog code for protected-mode Tue Feb 4 15:56:41 1997 Richard Basch * windows.in: Do not bother to define INTERFACE or INTERFACE_C Sun Feb 2 23:30:17 1997 Richard Basch * windows.in: Compile with /Ld to link dynamic libraries (win16) Compile DLL objects with /DKRB5_DLL_FILE (win16) Thu Jan 30 22:08:42 1997 Richard Basch * windows.in: Compile with /MD to link against the runtime library (win32) Thu Feb 6 15:32:46 1997 Tom Yu * pre.in: Add definitions for KDB5_DEPLIBS, KDB5_LIBS for convenience. Wed Feb 5 23:20:53 1997 Tom Yu * pre.in: Fix up TCL_* variables to work with changes to aclocal.m4 Tue Feb 4 20:23:31 1997 Tom Yu * pre.in: Fix typo in KADMCLNT_DEPLIBS. * pre.in: Add more --with-krb4 support (KRB4_LIBPATH and KRB4_INCLUDES). Mon Feb 3 23:29:02 1997 Tom Yu * pre.in: Add GEN_LIB support (-lgen); also fix --with-krb4 stuff (such as KRB4_LIB). Fri Jan 31 20:41:34 1997 Tom Yu * pre.in: Fix up GEN_LIB to DTRT * pre.in: Add KDB5_LIB, and also fix typo (-lutil -> -lkrb5util) Mon Jan 27 17:13:15 1997 Tom Yu * pre.in: Add variable to support new program building procedure. Thu Jan 16 18:58:16 1997 Tom Yu * post.in (Makefiles-prerecurse): Change to use double-colon rule. * pre.in (recursion rules): Change *-prerecurse and *-postrecurse targets to be double-colon rules, to allow for multiple targets to be evaluated in sequence. Fri Jan 3 23:16:31 1997 Tom Yu * lib.in: Change semantics of SHLIB_EXPFLAGS somewhat to sync with new aclocal.m4 changes. Thu Jan 2 18:19:20 1997 Tom Yu * lib.in: Add facilities for explicit dependencies in libraries. Mon Dec 30 12:54:23 1996 Ezra Peisach * lib.in: Remove object of symlink before creating. Sun Dec 29 22:40:14 1996 Tom Yu * pre.in: Add missing Makefiles rules. Sun Dec 29 21:24:01 1996 Tom Yu * lib.in: fix typo in profiled lib build * libobj.in: random bugfixes Sat Dec 28 21:46:33 1996 Tom Yu * libobj.in: Cause Makefile to depend on config/libobj.in * lib.in: Cause Makefile to depend on config/lib.in Fri Dec 27 17:06:41 1996 Tom Yu * lib.in: Fix up loops to deal with an OBJS.ST that is in the current directory; add a comment documenting possible make incompatibility if OBJS.ST is specified as ./OBJS.ST. * pre.in: * post.in: Fix up recursion to be somewhat saner. * lib.in: * libobj.in: Add these frags for new library build system. Tue Dec 24 16:43:45 1996 Tom Yu * config.guess: * config.sub: Update from autoconf-2.12. Thu Nov 21 11:55:16 EST 1996 Richard Basch * rm.bat: Do the work first; the comments are at the end so as to improve the speed of the script significantly (20%) * windows.in: corrected typo (all-windows) and added win32 support * win-post.in: win16/win32 support Mon Nov 11 20:53:01 1996 Tom Yu * pre.in (DEJAFLAGS): Change gmake-dependent $(shell uname foo) to use $(host), which will get set by AC_CANONICAL_HOST in configure.in. Thu Oct 31 17:45:21 1996 Sam Hartman * pre.in (FILE_MANDIR): Create $prefix/include/kerberosIV [36] Mon Oct 21 21:21:43 1996 Tom Yu * pre.in: Substitute for *_RECURSE variables. * post.in: Add *-recurse targets for new recursion method. Fri Oct 18 11:03:24 1996 Barry Jaspan * pre.in (DEJAFLAGS): s/:=/=/ [PR #117] Tue Oct 15 16:26:19 1996 Barry Jaspan * pre.in: add TEST_PATH argument to START_SERVERS and STOP_SERVERS Thu Oct 3 13:08:40 1996 Ezra Peisach * pre.in: Separate KADM5 unit test files to source dir and build dir based on how generated. Mon Sep 23 15:40:04 1996 Barry Jaspan * pre.in (DEJAFLAGS): set --srcdir $(srcdir) so unit test files don't have to be symlinked to build tree Fri Oct 18 01:13:19 1996 Sam Hartman * pre.in : Adjust directories to comply with autoconf standards [37] Fri Sep 20 16:58:08 1996 Barry Jaspan * pre.in: added support for KADM5 unit test system; could stand some cleaning Tue Jul 9 15:02:00 1996 Marc Horowitz * pre.in (SRVLIBS, SRVDEPLIBS, CLNTLIBS, CLNTDEPLIBS): added for support of new aclocal.m4 KRB5_LIBRARIES macro Thu Jun 13 23:02:23 1996 Tom Yu * post.in,pre.in: break some things out from aclocal.m4 and put them here Wed Jun 12 20:19:49 1996 Theodore Ts'o * windows.in (PAGESIZE): New variable which is used to control the /pagesize parameter for Windows 16. (Obviously we're suffering from library size bloat if we need to set this.) Wed Jun 12 15:31:19 1996 Ezra Peisach * config.guess: Updated to a more recent version (from autoconf 1.10). Mon Jun 10 17:18:34 1996 Theodore Ts'o * windows.in (CCOPTS): Windows-32 CCOPTS * win-post.in: Use a Windows-32 specific LIB command line syntax Thu Jun 6 15:54:57 1996 Theodore Y. Ts'o * windows.in (LIBCMD): Add the option /PAGESIZE:128 to the library command, since the krb5 library has gotten so big. Tue Mar 12 19:40:59 1996 Ken Raeburn * pre.in (SRCTOP, BUILDTOP): Don't define. Mon Oct 16 15:19:42 1995 Ezra Peisach * pre.in: KRB5_LIBDIR, ADMIN_BINDIR, KRB5_SHLIBDIR, KRB5_INCDIR are all based on exec_prefix. Wed Oct 11 18:13:30 1995 Sam Hartman * pre.in (DO_MAKE_SHLIB): substitute VEXT, for the version extension for shared libs Tue Oct 10 21:42:14 1995 Theodore Y. Ts'o * win-post.in: New file * windows.in: Moved .c -> .obj rule to win-post.in, since we need it after the LIBNAME makefile variable is defined in the main body of the Makefile. Wed Sep 27 00:51:51 1995 Theodore Y. Ts'o * winexclude.sed: New file, used for generating DOS zip files. Mon Sep 25 13:09:17 1995 Theodore Y. Ts'o * windows.in: * mac-pre.in: * pre.in: Added lines of the form "all:: all-$(WHAT)" for all, clean, install, and check. Wed Sep 13 10:20:02 1995 Keith Vetter (keithv@fusion.com) * windows.in: added windows value for SRCTOP. Thu Aug 24 19:25:10 1995 Theodore Y. Ts'o * .Sanitize: Update file list Fri Jul 7 15:56:09 EDT 1995 Paul Park (pjpark@mit.edu) * pre.in - Add DEPLIBS and LDFLAGS to be provided with each Makefile. Fri Jun 23 14:24:02 1995 Theodore Y. Ts'o * pre.in (SRCTOP): Change SRCTOP so that it's defined in configure script, instead of being hardcoded as $(srcdir)/$(BUILDTOP). Thu Jun 22 13:27:00 1995 Sam Hartman * pre.in (STEXT): Add definitions for STEXT and STATIC_TARGET Thu Jun 15 17:47:49 EDT 1995 Paul Park (pjpark@mit.edu) * pre.in - Add definitions for building and using shared libraries. Add KRB5_SHLIBDIR which is the destination directory for shared libraries. Wed Jun 14 19:34:12 1995 Tom Yu (tlyu@dragons-lair) * pre.in: DO_SUBDIRS causes make {install,clean,check,etc.} to get run in subdirectories where they haven't been before. Added some blank dependencies to keep things from breaking too badly. Fri Jun 9 18:39:55 1995 * pre.in: Remove KRB5ROOT Thu Jun 8 17:44:12 1995 * pre.in: Define ${prefix} since exec_prefix is sometimes to that. Don't create the directories include/krb5 and include/kerberosIV when installing. (They're not needed). Wed Jun 7 16:08:35 1995 * pre.in: Use the GNU/configure standard method of prefix and exec_prefix to determine where programs get installed. The use of KRB5ROOT is obsolete. Thu May 25 21:36:40 1995 Theodore Y. Ts'o (tytso@dcl) * pre.in(HOST_TYPE, SHEXT, DO_MAKE_SHLIB): Added variables filled in by configure Wed May 24 15:42:02 1995 Theodore Y. Ts'o (tytso@dcl) * config.guess, config.sub: Added for shared library support. Mon May 22 09:45:40 EDT 1995 Paul Park (pjpark@mit.edu) * pre.in - Add gssapi to list of subdirectories. Thu Apr 27 13:50:59 1995 Mark Eichin * pre.in (KRB4): remove, unused. Wed Apr 26 14:27:03 1995 Keith Vetter (keithv@fusion.com) * post.in: added target check-windows. * ren2long, ren2long.awk: scripts to rename DOS 8.3 names back to their proper longer names. Thu Apr 20 20:00:42 1995 Theodore Y. Ts'o (tytso@dcl) * post.in: The .depend production rule now does even more cannonicalization of the generated dependencies. * post.in: cc should be $(CC) Tue Apr 18 09:36:00 1995 Theodore Y. Ts'o * post.in (.depend, depend): Add production for creating the .depend file, and updating the Makefile.in with the new dependencies. Thu Apr 13 16:20:28 1995 Keith Vetter (keithv@fusion.com) * windows.in: compile with stdc extensions enabled versus strict stdc adherence. Tue Mar 28 17:58:55 1995 John Gilmore (gnu at toad.com) * mac-config.cache: Correct some entries. * mac-mf.sed: Improve conversion of pathnames, $(srcdir), support linking MPW tools (for make check, kinit). * mac-pre.in (.c.o): Add -sym on for debugging. (LDFLAGS): Remove ToolLibs.o. (RANLIB, ARCHIVE): Make these work. (MAKE): Make recursive makes work, with BuildProgram. Thu Mar 16 20:55:18 1995 John Gilmore (gnu at toad.com) First cut at Macintosh configuration support. * mac-config.cache: New file, a hand-built autoconf `config.cache' file with the right values for building under MPW. * mac-config.README: Documentation for mac-config.cache. * mac-pre.in, mac-post.in: Versions of pre.in and post.in for configuring on MPW. * mac-mf.sed: A `sed' script which will turn carefully constructed Unix Makefiles into carefully constructed Macintosh MPW Makefiles. Wed Mar 3 16:00:00 1995 Keith Vetter (keithv@fusion.com) * windows.in: changed included directories to reflect MAC changes Mon Feb 20 15:48:16 1995 Keith Vetter (keithv@fusion.com) * windows.in: changed API to INTERFACE Mon Feb 13 23:40:11 1995 Theodore Y. Ts'o (tytso@dcl) * pre.in: Add line for $(LD) Mon Feb 6 19:33:57 1995 Keith Vetter (keithv@fusion.com) * pre.in: Added macros for directory syntax, filename extensions and what system we're building on (defaults to Unix). * post.in: split clean into unix and windows branches * windows.in: new file--makefile macros and rules for windows * rm.bat: new file--DOS batch file to mimic Unix's rm command Wed Nov 2 21:04:18 1994 Theodore Y. Ts'o (tytso@dcl) * pre.in: Don't actually add the $(CPPOPTS) flags to CPPFLAGS; CPPFLAGS has them defined already. In fact, don't define the CPPOPTS makefile variable at all; we don't need it. * pre.in: Add support for a new --with-cppopts" value where you can put -DXXXXX such that they are found by autoconf tests that use run the preprocessor over header files. Tue Nov 1 14:11:57 1994 (tytso@rsx-11) * post.in (clean): Also clean up config.log, pre.out, post.out and Makefile.out Thu Oct 6 19:41:52 1994 Theodore Y. Ts'o (tytso@dcl) * post.in: add default "check" rule for Makefiles that don't do anything else. * pre.in: add default all:: rule at the end of pre.in Thu Aug 4 03:52:23 1994 Tom Yu (tlyu@dragons-lair) * pre.in: strip installed programs by default Sun Jul 3 04:41:54 1994 Tom Yu (tlyu at dragons-lair) * post.in: whoops, now making sure errors don't get returned if something is empty * post.in: fixing missing semicolon in make rules * pre.in: MV=mv -f Sat Jul 2 00:03:24 1994 Tom Yu (tlyu at dragons-lair) * pre.in: added KRB4 to the template to keep things like v4server from losing