AC_PREREQ(2.52) AC_COPYRIGHT([Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Massachusetts Institute of Technology. ]) dnl dnl Figure out the top of the source and build trees. We depend on localdir dnl being a relative pathname; we could make it general later, but for now dnl this is good enough. dnl AC_DEFUN(V5_SET_TOPDIR,[dnl ifdef([AC_LOCALDIR], [dnl AC_LOCALDIR exists in 2.13, but not newer autoconfs. ac_reltopdir=AC_LOCALDIR case "$ac_reltopdir" in /*) echo "Configure script built with absolute localdir pathname" exit 1 ;; "") ac_reltopdir=. ;; esac ],[ ac_reltopdir= for x in . .. ../.. ../../.. ../../../..; do if test "x$ac_reltopdir" = "x" -a -r "$srcdir/$x/aclocal.m4" ; then ac_reltopdir=$x fi done if test "x$ac_reltopdir" = "x"; then echo "Configure could not determine the relative topdir" exit 1 fi ]) ac_topdir=$srcdir/$ac_reltopdir ac_config_fragdir=$ac_reltopdir/config krb5_pre_in=$ac_config_fragdir/pre.in krb5_post_in=$ac_config_fragdir/post.in echo "Looking for $srcdir/$ac_config_fragdir" if test -d "$srcdir/$ac_config_fragdir"; then AC_CONFIG_AUX_DIR($ac_config_fragdir) else AC_MSG_ERROR([can not find config/ directory in $ac_reltopdir]) fi ])dnl dnl dnl drop in standard rules for all configure files -- CONFIG_RULES dnl AC_DEFUN(CONFIG_RULES,[dnl V5_SET_TOPDIR dnl WITH_CC dnl WITH_CCOPTS dnl WITH_CPPOPTS dnl WITH_LINKER dnl WITH_LDOPTS dnl WITH_KRB4 dnl KRB5_AC_CHOOSE_ET dnl KRB5_AC_CHOOSE_SS dnl KRB5_AC_CHOOSE_DB dnl dnl allow stuff in tree to access deprecated/private stuff for now AC_DEFINE([KRB5_PRIVATE], 1, [Define only if building in-tree]) AC_DEFINE([KRB5_DEPRECATED], 1, [Define only if building in-tree]) AC_C_CONST dnl WITH_NETLIB dnl WITH_HESIOD dnl AC_ARG_PROGRAM dnl dnl dnl This selects the correct autoconf file; either the one in our source tree, dnl or the one found in the user's path. $srcdir may be relative, and if so, dnl it's relative to the directory of the configure script. Since the dnl automatic makefile rules to rerun autoconf cd into that directory, the dnl right thing happens. dnl dnl if test -f $srcdir/$ac_reltopdir/util/autoconf/autoconf ; then dnl AUTOCONF=$ac_reltopdir/util/autoconf/autoconf dnl AUTOCONFFLAGS='--macrodir=$(CONFIG_RELTOPDIR)/util/autoconf' dnl AUTOHEADER=$ac_reltopdir/util/autoconf/autoheader dnl AUTOHEADERFLAGS='--macrodir=$(CONFIG_RELTOPDIR)/util/autoconf' dnl else AUTOCONF=autoconf AUTOCONFFLAGS= AUTOHEADER=autoheader AUTOHEADERFLAGS= AUTOCONFINCFLAGS="--include" dnl fi AC_SUBST(AUTOCONF) AC_SUBST(AUTOCONFFLAGS) AC_SUBST(AUTOCONFINCFLAGS) AC_SUBST(AUTOHEADER) AC_SUBST(AUTOHEADERFLAGS) dnl dnl This identifies the top of the source tree relative to the directory dnl in which the configure file lives. dnl CONFIG_RELTOPDIR=$ac_reltopdir AC_SUBST(CONFIG_RELTOPDIR) AC_SUBST(subdirs) lib_frag=$srcdir/$ac_config_fragdir/lib.in AC_SUBST_FILE(lib_frag) libobj_frag=$srcdir/$ac_config_fragdir/libobj.in AC_SUBST_FILE(libobj_frag) ])dnl dnl This is somewhat gross and should go away when the build system dnl is revamped. -- tlyu dnl DECLARE_SYS_ERRLIST - check for sys_errlist in libc dnl AC_DEFUN([DECLARE_SYS_ERRLIST], [AC_CACHE_CHECK([for sys_errlist declaration], krb5_cv_decl_sys_errlist, [AC_TRY_COMPILE([#include #include ], [1+sys_nerr;], krb5_cv_decl_sys_errlist=yes, krb5_cv_decl_sys_errlist=no)]) # assume sys_nerr won't be declared w/o being in libc if test $krb5_cv_decl_sys_errlist = yes; then AC_DEFINE(SYS_ERRLIST_DECLARED,1,[Define if sys_errlist is defined in errno.h]) AC_DEFINE(HAVE_SYS_ERRLIST,1,[Define if sys_errlist in libc]) else # This means that sys_errlist is not declared in errno.h, but may still # be in libc. AC_CACHE_CHECK([for sys_errlist in libc], krb5_cv_var_sys_errlist, [AC_TRY_LINK([extern int sys_nerr;], [if (1+sys_nerr < 0) return 1;], krb5_cv_var_sys_errlist=yes, krb5_cv_var_sys_errlist=no;)]) if test $krb5_cv_var_sys_errlist = yes; then AC_DEFINE(HAVE_SYS_ERRLIST,1,[Define if sys_errlist in libc]) # Do this cruft for backwards compatibility for now. AC_DEFINE(NEED_SYS_ERRLIST,1,[Define if need to declare sys_errlist]) else AC_MSG_WARN([sys_errlist is neither in errno.h nor in libc]) fi fi]) dnl dnl check for sigmask/sigprocmask -- CHECK_SIGPROCMASK dnl AC_DEFUN(CHECK_SIGPROCMASK,[ AC_MSG_CHECKING([for use of sigprocmask]) AC_CACHE_VAL(krb5_cv_func_sigprocmask_use, [AC_TRY_LINK([#include ], [sigprocmask(SIG_SETMASK,0,0);], krb5_cv_func_sigprocmask_use=yes, AC_TRY_LINK([#include ], [sigmask(1);], krb5_cv_func_sigprocmask_use=no, krb5_cv_func_sigprocmask_use=yes))]) AC_MSG_RESULT($krb5_cv_func_sigprocmask_use) if test $krb5_cv_func_sigprocmask_use = yes; then AC_DEFINE(USE_SIGPROCMASK) fi ])dnl dnl AC_DEFUN(AC_PROG_ARCHIVE, [AC_CHECK_PROG(ARCHIVE, ar, ar cqv, false)])dnl AC_DEFUN(AC_PROG_ARCHIVE_ADD, [AC_CHECK_PROG(ARADD, ar, ar cruv, false)])dnl dnl dnl check for -- CHECK_DIRENT dnl (may need to be more complex later) dnl AC_DEFUN(CHECK_DIRENT,[ AC_CHECK_HEADER(dirent.h,AC_DEFINE(USE_DIRENT_H,1,[Define if you have dirent.h functionality]))])dnl dnl dnl check if union wait is defined, or if WAIT_USES_INT -- CHECK_WAIT_TYPE dnl AC_DEFUN(CHECK_WAIT_TYPE,[ AC_MSG_CHECKING([if argument to wait is int *]) AC_CACHE_VAL(krb5_cv_struct_wait, dnl Test for prototype clash - if there is none - then assume int * works [AC_TRY_COMPILE([#include #include extern pid_t wait(int *);],[], krb5_cv_struct_wait=no,dnl dnl Else fallback on old stuff [AC_TRY_COMPILE( [#include ], [union wait i; #ifdef WEXITSTATUS WEXITSTATUS (i); #endif ], krb5_cv_struct_wait=yes, krb5_cv_struct_wait=no)])]) AC_MSG_RESULT($krb5_cv_struct_wait) if test $krb5_cv_struct_wait = no; then AC_DEFINE(WAIT_USES_INT,1,[Define if wait takes int as a argument]) fi ])dnl dnl dnl check for POSIX signal handling -- CHECK_SIGNALS dnl AC_DEFUN(CHECK_SIGNALS,[ AC_CHECK_FUNC(sigprocmask, AC_MSG_CHECKING(for sigset_t and POSIX_SIGNALS) AC_CACHE_VAL(krb5_cv_type_sigset_t, [AC_TRY_COMPILE( [#include ], [sigset_t x], krb5_cv_type_sigset_t=yes, krb5_cv_type_sigset_t=no)]) AC_MSG_RESULT($krb5_cv_type_sigset_t) if test $krb5_cv_type_sigset_t = yes; then AC_DEFINE(POSIX_SIGNALS,1,[Define if POSIX signal handling is used]) fi )])dnl dnl dnl check for signal type dnl dnl AC_RETSIGTYPE isn't quite right, but almost. AC_DEFUN(KRB5_SIGTYPE,[ AC_MSG_CHECKING([POSIX signal handlers]) AC_CACHE_VAL(krb5_cv_has_posix_signals, [AC_TRY_COMPILE( [#include #include #ifdef signal #undef signal #endif extern void (*signal ()) ();], [], krb5_cv_has_posix_signals=yes, krb5_cv_has_posix_signals=no)]) AC_MSG_RESULT($krb5_cv_has_posix_signals) if test $krb5_cv_has_posix_signals = yes; then stype=void AC_DEFINE(POSIX_SIGTYPE, 1, [Define if POSIX signal handlers are used]) else if test $ac_cv_type_signal = void; then stype=void else stype=int fi fi AC_DEFINE_UNQUOTED(krb5_sigtype, $stype, [Define krb5_sigtype to type of signal handler])dnl ])dnl dnl dnl check for POSIX setjmp/longjmp -- CHECK_SETJMP dnl AC_DEFUN(CHECK_SETJMP,[ AC_CHECK_FUNC(sigsetjmp, AC_MSG_CHECKING(for sigjmp_buf) AC_CACHE_VAL(krb5_cv_struct_sigjmp_buf, [AC_TRY_COMPILE( [#include ],[sigjmp_buf x], krb5_cv_struct_sigjmp_buf=yes,krb5_cv_struct_sigjmp_buf=no)]) AC_MSG_RESULT($krb5_cv_struct_sigjmp_buf) if test $krb5_cv_struct_sigjmp_buf = yes; then AC_DEFINE(POSIX_SETJMP) fi )])dnl dnl dnl Check for IPv6 compile-time support. dnl AC_DEFUN(KRB5_AC_INET6,[ AC_CHECK_HEADERS(sys/types.h macsock.h sys/socket.h netinet/in.h netdb.h) AC_CHECK_FUNCS(inet_ntop inet_pton getnameinfo) dnl getaddrinfo test needs netdb.h, for proper compilation on alpha dnl under OSF/1^H^H^H^H^HDigital^H^H^H^H^H^H^HTru64 UNIX, where it's dnl a macro AC_MSG_CHECKING(for getaddrinfo) AC_CACHE_VAL(ac_cv_func_getaddrinfo, [AC_TRY_LINK([#ifdef HAVE_NETDB_H #include #endif],[ struct addrinfo *ai; getaddrinfo("kerberos.mit.edu", "echo", 0, &ai); ], ac_cv_func_getaddrinfo=yes, ac_cv_func_getaddrinfo=no)]) AC_MSG_RESULT($ac_cv_func_getaddrinfo) if test $ac_cv_func_getaddrinfo = yes; then AC_DEFINE(HAVE_GETADDRINFO,1,[Define if you have the getaddrinfo function]) fi dnl AC_REQUIRE([KRB5_SOCKADDR_SA_LEN])dnl AC_ARG_ENABLE([ipv6], [ --enable-ipv6 enable IPv6 support --disable-ipv6 disable IPv6 support (default: enable if available)], ,enableval=try)dnl case "$enableval" in yes | try) KRB5_AC_CHECK_INET6 if test "$enableval/$krb5_cv_inet6" = yes/no ; then AC_MSG_ERROR(IPv6 support does not appear to be available) fi ;; no) ;; *) AC_MSG_ERROR(bad value "$enableval" for enable-ipv6 option) ;; esac ])dnl dnl AC_DEFUN(KRB5_AC_CHECK_TYPE_WITH_HEADERS,[ AC_MSG_CHECKING(for type $1) changequote(<<,>>)dnl varname=`echo $1 | sed 's,[ -],_,g'` changequote([,])dnl AC_CACHE_VAL(krb5_cv_$varname,[ AC_TRY_COMPILE([$2],[ $1 foo; ], eval krb5_cv_$varname=yes, eval krb5_cv_$varname=no)]) eval x="\$krb5_cv_$varname" AC_MSG_RESULT($x) if eval test "$x" = yes ; then AC_DEFINE_UNQUOTED(HAVE_`echo $varname | tr [[[a-z]]] [[[A-Z]]]`) fi]) dnl dnl AC_DEFUN(KRB5_AC_CHECK_SOCKADDR_STORAGE,[ KRB5_AC_CHECK_TYPE_WITH_HEADERS(struct sockaddr_storage, [ #ifdef HAVE_SYS_TYPES_H #include #endif #ifdef HAVE_MACSOCK_H #include #else #include #endif #include ])])dnl dnl dnl AC_DEFUN(KRB5_AC_CHECK_INET6,[ AC_REQUIRE([KRB5_AC_CHECK_SOCKADDR_STORAGE])dnl AC_MSG_CHECKING(for IPv6 compile-time support) AC_CACHE_VAL(krb5_cv_inet6,[ dnl NetBSD and Linux both seem to have gotten get*info but not getipnodeby* dnl as of the time I'm writing this, so we'll use get*info only. if test "$ac_cv_func_inet_ntop" != "yes" ; then krb5_cv_inet6=no else AC_TRY_COMPILE([ #ifdef HAVE_SYS_TYPES_H #include #endif #ifdef HAVE_MACSOCK_H #include #else #include #endif #include #include ],[ struct sockaddr_in6 in; AF_INET6; IN6_IS_ADDR_LINKLOCAL (&in.sin6_addr); ],krb5_cv_inet6=yes,krb5_cv_inet6=no)]) fi AC_MSG_RESULT($krb5_cv_inet6) if test $krb5_cv_inet6 = yes ; then AC_DEFINE(KRB5_USE_INET6,1,[Define if we should compile in IPv6 support (even if we can't use it at run time)]) fi ])dnl dnl dnl Generic File existence tests dnl dnl K5_AC_CHECK_FILE(FILE, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) dnl AC_DEFUN(K5_AC_CHECK_FILE, [AC_REQUIRE([AC_PROG_CC])dnl dnl Do the transliteration at runtime so arg 1 can be a shell variable. ac_safe=`echo "$1" | sed 'y%./+-%__p_%'` AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(ac_cv_file_$ac_safe, [if test "$cross_compiling" = yes; then errprint(__file__:__line__: warning: Cannot check for file existence when cross compiling )dnl AC_MSG_ERROR(Cannot check for file existence when cross compiling) else if test -r $1; then eval "ac_cv_file_$ac_safe=yes" else eval "ac_cv_file_$ac_safe=no" fi fi])dnl if eval "test \"`echo '$ac_cv_file_'$ac_safe`\" = yes"; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) ifelse([$3], , , [$3 np])dnl fi ]) dnl dnl K5_AC_CHECK_FILES(FILE... [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) dnl AC_DEFUN(K5_AC_CHECK_FILES, [AC_REQUIRE([AC_PROG_CC])dnl for ac_file in $1 do K5_AC_CHECK_FILE($ac_file, [changequote(, )dnl ac_tr_file=HAVE`echo $ac_file | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` changequote([, ])dnl AC_DEFINE_UNQUOTED($ac_tr_file) $2], $3)dnl done ]) dnl dnl set $(KRB4) from --with-krb4=value -- WITH_KRB4 dnl AC_DEFUN(WITH_KRB4,[ AC_ARG_WITH([krb4], [ --without-krb4 don't include Kerberos V4 backwards compatibility --with-krb4 use V4 libraries included with V5 (default) --with-krb4=KRB4DIR use preinstalled V4 libraries], , withval=yes )dnl if test $withval = no; then AC_MSG_RESULT(no krb4 support) KRB4_LIB= KRB4_DEPLIB= KRB4_INCLUDES= KRB4_LIBPATH= KRB_ERR_H_DEP= krb5_cv_build_krb4_libs=no krb5_cv_krb4_libdir= else AC_DEFINE([KRB5_KRB4_COMPAT], 1, [Define this if building with krb4 compat]) if test $withval = yes; then AC_MSG_RESULT(built in krb4 support) KRB4_DEPLIB='$(TOPLIBD)/libkrb4$(DEPLIBEXT)' KRB4_LIB=-lkrb4 KRB4_INCLUDES='-I$(SRCTOP)/include/kerberosIV -I$(BUILDTOP)/include/kerberosIV' KRB4_LIBPATH= KRB_ERR_H_DEP='$(BUILDTOP)/include/kerberosIV/krb_err.h' krb5_cv_build_krb4_libs=yes krb5_cv_krb4_libdir= else AC_MSG_RESULT(preinstalled krb4 in $withval) KRB4_LIB="-lkrb" dnl DEPKRB4_LIB="$withval/lib/libkrb.a" KRB4_INCLUDES="-I$withval/include" KRB4_LIBPATH="-L$withval/lib" KRB_ERR_H_DEP= krb5_cv_build_krb4_libs=no krb5_cv_krb4_libdir="$withval/lib" fi fi AC_SUBST(KRB4_INCLUDES) AC_SUBST(KRB4_LIBPATH) AC_SUBST(KRB4_LIB) AC_SUBST(KRB4_DEPLIB) AC_SUBST(KRB_ERR_H_DEP) dnl We always compile the des425 library DES425_DEPLIB='$(TOPLIBD)/libdes425$(DEPLIBEXT)' DES425_LIB=-ldes425 AC_SUBST(DES425_DEPLIB) AC_SUBST(DES425_LIB) ])dnl dnl dnl set $(CC) from --with-cc=value dnl AC_DEFUN(KRB5_INIT_CCOPTS,[CCOPTS= ]) dnl AC_DEFUN(KRB5_AC_CHECK_FOR_CFLAGS,[ AC_BEFORE([$0],[AC_PROG_CC]) krb5_ac_cflags_set=${CFLAGS+set} ]) dnl AC_DEFUN(WITH_CC_DEPRECATED_ARG,[dnl AC_ARG_WITH([cc],AC_HELP_STRING(--with-cc=COMPILER,deprecated; use CC=...), AC_MSG_ERROR(option --with-cc is deprecated; use CC=...))]) AC_DEFUN(WITH_CC,[dnl AC_REQUIRE([KRB5_AC_CHECK_FOR_CFLAGS])dnl AC_REQUIRE([WITH_CC_DEPRECATED_ARG])dnl AC_REQUIRE([AC_PROG_CC])dnl krb5_cv_prog_gcc=$ac_cv_c_compiler_gnu if test $ac_cv_c_compiler_gnu = yes ; then HAVE_GCC=yes else HAVE_GCC= fi AC_SUBST(HAVE_GCC) # maybe add -Waggregate-return, or can we assume that actually works by now? # -Wno-comment is for SunOS system header extra_gcc_warn_opts="-Wall -Wmissing-prototypes -Wcast-qual \ -Wcast-align -Wconversion -Wshadow -Wno-comment -pedantic" if test "$GCC" = yes ; then if test "x$krb5_ac_cflags_set" = xset ; then AC_MSG_NOTICE(not adding extra gcc warning flags because CFLAGS was set) else AC_MSG_NOTICE(adding extra warning flags for gcc) CFLAGS="$CFLAGS $extra_gcc_warn_opts" fi fi ])dnl dnl dnl set $(LD) from --with-linker=value dnl AC_DEFUN(WITH_LINKER,[ AC_ARG_WITH([linker], AC_HELP_STRING(--with-linker=LINKER,deprecated; use LD=...), AC_MSG_ERROR(option --with-linker is deprecated; use LD=...)) if test -z "$LD" ; then LD=$CC; fi AC_ARG_VAR(LD,[linker command [CC]]) ])dnl dnl dnl set $(CCOPTS) from --with-ccopts=value dnl AC_DEFUN(WITH_CCOPTS,[ AC_REQUIRE([KRB5_INIT_CCOPTS])dnl AC_ARG_WITH([ccopts], AC_HELP_STRING(--with-ccopts=CCOPTS, deprecated; use CFLAGS=...), AC_MSG_ERROR(option --with-ccopts is deprecated; use CFLAGS=...))]) dnl dnl set $(LDFLAGS) from --with-ldopts=value dnl AC_DEFUN(WITH_LDOPTS,[ AC_ARG_WITH([ldopts], AC_HELP_STRING(--with-ldopts=LDOPTS,deprecated; use LDFLAGS=...), AC_MSG_ERROR(option --with-ldopts is deprecated; use LDFLAGS=...)) AC_SUBST(LDFLAGS)])dnl dnl dnl set $(CPPOPTS) from --with-cppopts=value dnl AC_DEFUN(WITH_CPPOPTS,[ AC_REQUIRE_CPP AC_ARG_WITH([cppopts], AC_HELP_STRING(--with-cppopts=CPPOPTS,deprecated; use CPPFLAGS=...), AC_MSG_ERROR(option --with-cppopts is deprecated; use CPPFLAGS=...))]) dnl dnl check for yylineno -- HAVE_YYLINENO dnl AC_DEFUN(HAVE_YYLINENO,[dnl AC_REQUIRE_CPP()AC_REQUIRE([AC_PROG_LEX])dnl AC_MSG_CHECKING([for yylineno declaration]) AC_CACHE_VAL(krb5_cv_type_yylineno, # some systems have yylineno, others don't... echo '%% %%' | ${LEX} -t > conftest.out if egrep yylineno conftest.out >/dev/null 2>&1; then krb5_cv_type_yylineno=yes else krb5_cv_type_yylineno=no fi rm -f conftest.out) AC_MSG_RESULT($krb5_cv_type_yylineno) if test $krb5_cv_type_yylineno = no; then AC_DEFINE(NO_YYLINENO, 1, [Define if lex produes code with yylineno]) fi ])dnl dnl dnl K5_GEN_MAKEFILE([dir, [frags]]) dnl AC_DEFUN(K5_GEN_MAKEFILE,[dnl ifelse($1, ,[_K5_GEN_MAKEFILE(.,$2)],[_K5_GEN_MAKEFILE($1,$2)]) ]) dnl dnl _K5_GEN_MAKEFILE(dir, [frags]) dnl dir must be present in this case dnl Note: Be careful in quoting. dnl The ac_foreach generates the list of fragments to include dnl or "" if $2 is empty AC_DEFUN(_K5_GEN_MAKEFILE,[dnl AC_CONFIG_FILES([$1/Makefile:$krb5_pre_in:$1/Makefile.in:$krb5_post_in]) ]) dnl dnl K5_GEN_FILE( ) dnl AC_DEFUN(K5_GEN_FILE,[AC_CONFIG_FILES($1)])dnl dnl dnl K5_AC_OUTPUT dnl Note: Adds the variables to config.status for individual dnl Makefile generation from config.statsu AC_DEFUN(K5_AC_OUTPUT,[dnl AC_CONFIG_COMMANDS([krb5_config_prefix], [], dnl [krb5_pre_in=$krb5_pre_in ac_config_fragdir=$ac_config_fragdir krb5_post_in=$krb5_post_in]) AC_OUTPUT])dnl dnl dnl V5_AC_OUTPUT_MAKEFILE dnl AC_DEFUN(V5_AC_OUTPUT_MAKEFILE, [ifelse($1, , [_V5_AC_OUTPUT_MAKEFILE(.,$2)],[_V5_AC_OUTPUT_MAKEFILE($1,$2)])]) dnl define(_V5_AC_OUTPUT_MAKEFILE, [ifelse($2, , ,AC_CONFIG_FILES($2)) AC_FOREACH([DIR], [$1],dnl [AC_CONFIG_FILES(DIR[/Makefile:$krb5_pre_in:]DIR[/Makefile.in:$krb5_post_in])]) K5_AC_OUTPUT])dnl dnl dnl dnl KRB5_SOCKADDR_SA_LEN: define HAVE_SA_LEN if sockaddr contains the sa_len dnl component dnl AC_DEFUN([KRB5_SOCKADDR_SA_LEN],[ dnl AC_MSG_CHECKING(whether struct sockaddr contains sa_len) AC_CACHE_VAL(krb5_cv_sockaddr_sa_len, [AC_TRY_COMPILE([#include #include ], [struct sockaddr sa; sa.sa_len;], krb5_cv_sockaddr_sa_len=yes,krb5_cv_sockaddr_sa_len=no)]) AC_MSG_RESULT([$]krb5_cv_sockaddr_sa_len) if test $krb5_cv_sockaddr_sa_len = yes; then AC_DEFINE_UNQUOTED(HAVE_SA_LEN,1,[Define if struct sockaddr contains sa_len]) fi ]) dnl dnl dnl CHECK_UTMP: check utmp structure and functions dnl AC_DEFUN(CHECK_UTMP,[ AC_MSG_CHECKING([ut_pid in struct utmp]) AC_CACHE_VAL(krb5_cv_struct_ut_pid, [AC_TRY_COMPILE( [#include #include ], [struct utmp ut; ut.ut_pid;], krb5_cv_struct_ut_pid=yes, krb5_cv_struct_ut_pid=no)]) AC_MSG_RESULT($krb5_cv_struct_ut_pid) if test $krb5_cv_struct_ut_pid = no; then AC_DEFINE(NO_UT_PID) fi AC_MSG_CHECKING([ut_type in struct utmp]) AC_CACHE_VAL(krb5_cv_struct_ut_type, [AC_TRY_COMPILE( [#include #include ], [struct utmp ut; ut.ut_type;], krb5_cv_struct_ut_type=yes, krb5_cv_struct_ut_type=no)]) AC_MSG_RESULT($krb5_cv_struct_ut_type) if test $krb5_cv_struct_ut_type = no; then AC_DEFINE(NO_UT_TYPE) fi AC_MSG_CHECKING([ut_host in struct utmp]) AC_CACHE_VAL(krb5_cv_struct_ut_host, [AC_TRY_COMPILE( [#include #include ], [struct utmp ut; ut.ut_host;], krb5_cv_struct_ut_host=yes, krb5_cv_struct_ut_host=no)]) AC_MSG_RESULT($krb5_cv_struct_ut_host) if test $krb5_cv_struct_ut_host = no; then AC_DEFINE(NO_UT_HOST) fi AC_MSG_CHECKING([ut_exit in struct utmp]) AC_CACHE_VAL(krb5_cv_struct_ut_exit, [AC_TRY_COMPILE( [#include #include ], [struct utmp ut; ut.ut_exit;], krb5_cv_struct_ut_exit=yes, krb5_cv_struct_ut_exit=no)]) AC_MSG_RESULT($krb5_cv_struct_ut_exit) if test $krb5_cv_struct_ut_exit = no; then AC_DEFINE(NO_UT_EXIT) fi AC_CHECK_FUNC(setutent,AC_DEFINE(HAVE_SETUTENT)) AC_CHECK_FUNC(setutxent,AC_DEFINE(HAVE_SETUTXENT)) AC_CHECK_FUNC(updwtmp,AC_DEFINE(HAVE_UPDWTMP)) AC_CHECK_FUNC(updwtmpx,AC_DEFINE(HAVE_UPDWTMPX)) ])dnl dnl dnl WITH_NETLIB dnl dnl AC_DEFUN(WITH_NETLIB,[ AC_ARG_WITH([netlib], AC_HELP_STRING([--with-netlib=LIBS], use user defined resolver library), [ if test "$withval" = yes -o "$withval" = no ; then AC_MSG_RESULT("netlib will link with C library resolver only") else LIBS="$LIBS $withval" AC_MSG_RESULT("netlib will use \'$withval\'") fi ],dnl [AC_LIBRARY_NET] )])dnl dnl dnl Check if stdarg or varargs is available *and compiles*; prefer stdarg. dnl (This was sent to djm for incorporation into autoconf 3/12/1996. KR) dnl AC_DEFUN(AC_HEADER_STDARG, [ AC_MSG_CHECKING([for stdarg.h]) AC_CACHE_VAL(ac_cv_header_stdarg_h, [AC_TRY_COMPILE([#include ], [ } /* ac_try_compile will have started a function body */ int aoeu (char *format, ...) { va_list v; int i; va_start (v, format); i = va_arg (v, int); va_end (v); ],ac_cv_header_stdarg_h=yes,ac_cv_header_stdarg_h=no)])dnl AC_MSG_RESULT($ac_cv_header_stdarg_h) if test $ac_cv_header_stdarg_h = yes; then AC_DEFINE(HAVE_STDARG_H, 1, [Define if stdarg available and compiles]) else AC_MSG_CHECKING([for varargs.h]) AC_CACHE_VAL(ac_cv_header_varargs_h, [AC_TRY_COMPILE([#include ],[ } /* ac_try_compile will have started a function body */ int aoeu (va_alist) va_dcl { va_list v; int i; va_start (v); i = va_arg (v, int); va_end (v); ],ac_cv_header_varargs_h=yes,ac_cv_header_varargs_h=no)])dnl AC_MSG_RESULT($ac_cv_header_varargs_h) if test $ac_cv_header_varargs_h = yes; then AC_DEFINE(HAVE_VARARGS_H, 1, [Define if varargs available and compiles]) else AC_MSG_ERROR(Neither stdarg nor varargs compile?) fi fi dnl stdarg test failure ])dnl dnl dnl KRB5_AC_NEED_LIBGEN --- check if libgen needs to be linked in for dnl compile/step dnl dnl AC_DEFUN(KRB5_AC_NEED_LIBGEN,[ AC_REQUIRE([AC_PROG_CC])dnl dnl dnl regcomp is present but non-functional on Solaris 2.4 dnl AC_MSG_CHECKING(for working regcomp) AC_CACHE_VAL(ac_cv_func_regcomp,[ AC_TRY_RUN([ #include #include regex_t x; regmatch_t m; int main() { return regcomp(&x,"pat.*",0) || regexec(&x,"pattern",1,&m,0); } ], ac_cv_func_regcomp=yes, ac_cv_func_regcomp=no, AC_MSG_ERROR([Cannot test regcomp when cross compiling]))]) AC_MSG_RESULT($ac_cv_func_regcomp) test $ac_cv_func_regcomp = yes && AC_DEFINE(HAVE_REGCOMP,1,[Define if regcomp exists and functions]) dnl dnl Check for the compile and step functions - only if regcomp is not available dnl if test $ac_cv_func_regcomp = no; then save_LIBS="$LIBS" LIBS=-lgen dnl this will fail if there's no compile/step in -lgen, or if there's dnl no -lgen. This is fine. AC_CHECK_FUNCS(compile step) LIBS="$save_LIBS" dnl dnl Set GEN_LIB if necessary dnl AC_CHECK_LIB(gen, compile, GEN_LIB=-lgen, GEN_LIB=) AC_SUBST(GEN_LIB) fi ]) dnl dnl KRB5_AC_REGEX_FUNCS --- check for different regular expression dnl support functions dnl AC_DEFUN(KRB5_AC_REGEX_FUNCS,[ AC_CHECK_FUNCS(re_comp re_exec regexec) AC_REQUIRE([KRB5_AC_NEED_LIBGEN])dnl ])dnl dnl dnl AC_KRB5_TCL_FIND_CONFIG (uses tcl_dir) dnl AC_DEFUN(AC_KRB5_TCL_FIND_CONFIG,[ AC_REQUIRE([KRB5_LIB_AUX])dnl AC_MSG_CHECKING(for tclConfig.sh) if test -r "$tcl_dir/lib/tclConfig.sh" ; then tcl_conf="$tcl_dir/lib/tclConfig.sh" else tcl_conf= lib="$tcl_dir/lib" changequote(<<,>>)dnl for d in "$lib" "$lib"/tcl7.[0-9] "$lib"/tcl8.[0-9] ; do if test -r "$d/tclConfig.sh" ; then tcl_conf="$tcl_conf $d/tclConfig.sh" fi done changequote([,])dnl fi if test -n "$tcl_conf" ; then AC_MSG_RESULT($tcl_conf) else AC_MSG_RESULT(not found) fi tcl_ok_conf= tcl_vers_maj= tcl_vers_min= old_CPPFLAGS=$CPPFLAGS old_LIBS=$LIBS old_LDFLAGS=$LDFLAGS if test -n "$tcl_conf" ; then for file in $tcl_conf ; do TCL_MAJOR_VERSION=x ; TCL_MINOR_VERSION=x AC_MSG_CHECKING(Tcl info in $file) . $file v=$TCL_MAJOR_VERSION.$TCL_MINOR_VERSION if test -z "$tcl_vers_maj" \ || test "$tcl_vers_maj" -lt "$TCL_MAJOR_VERSION" \ || test "$tcl_vers_maj" = "$TCL_MAJOR_VERSION" -a "$tcl_vers_min" -lt "$TCL_MINOR_VERSION" ; then for incdir in "$TCL_PREFIX/include/tcl$v" "$TCL_PREFIX/include" ; do if test -r "$incdir/tcl.h" -o -r "$incdir/tcl/tcl.h" ; then CPPFLAGS="$old_CPPFLAGS -I$incdir" break fi done LIBS="$old_LIBS `eval echo x $TCL_LIB_SPEC $TCL_LIBS | sed 's/^x//'`" LDFLAGS="$old_LDFLAGS $TCL_LD_FLAGS" AC_TRY_LINK( , [Tcl_CreateInterp ();], tcl_ok_conf=$file tcl_vers_maj=$TCL_MAJOR_VERSION tcl_vers_min=$TCL_MINOR_VERSION AC_MSG_RESULT($v - working), AC_MSG_RESULT($v - compilation failed) ) else AC_MSG_RESULT(older version $v) fi done fi CPPFLAGS=$old_CPPFLAGS LIBS=$old_LIBS LDFLAGS=$old_LDFLAGS tcl_header=no tcl_lib=no if test -n "$tcl_ok_conf" ; then . $tcl_ok_conf TCL_INCLUDES= for incdir in "$TCL_PREFIX/include/tcl$v" "$TCL_PREFIX/include" ; do if test -r "$incdir/tcl.h" -o -r "$incdir/tcl/tcl.h" ; then if test "$incdir" != "/usr/include" ; then TCL_INCLUDES=-I$incdir fi break fi done # Need eval because the first-level expansion could reference # variables like ${TCL_DBGX}. eval TCL_LIBS='"'$TCL_LIB_SPEC $TCL_LIBS $TCL_DL_LIBS'"' TCL_LIBPATH="-L$TCL_EXEC_PREFIX/lib" TCL_RPATH=":$TCL_EXEC_PREFIX/lib" if test "$DEPLIBEXT" != "$SHLIBEXT" && test -n "$RPATH_FLAG"; then TCL_MAYBE_RPATH='$(RPATH_FLAG)'"$TCL_EXEC_PREFIX/lib$RPATH_TAIL" else TCL_MAYBE_RPATH= fi CPPFLAGS="$old_CPPFLAGS $TCL_INCLUDES" AC_CHECK_HEADER(tcl.h,AC_DEFINE(HAVE_TCL_H) tcl_header=yes) if test $tcl_header=no; then AC_CHECK_HEADER(tcl/tcl.h,AC_DEFINE(HAVE_TCL_TCL_H) tcl_header=yes) fi CPPFLAGS="$old_CPPFLAGS" tcl_lib=yes fi AC_SUBST(TCL_INCLUDES) AC_SUBST(TCL_LIBS) AC_SUBST(TCL_LIBPATH) AC_SUBST(TCL_RPATH) AC_SUBST(TCL_MAYBE_RPATH) ])dnl dnl dnl AC_KRB5_TCL_TRYOLD dnl attempt to use old search algorithm for locating tcl dnl AC_DEFUN(AC_KRB5_TCL_TRYOLD, [ AC_MSG_WARN([trying old tcl search code]) if test "$with_tcl" != yes -a "$with_tcl" != no; then TCL_INCLUDES=-I$with_tcl/include TCL_LIBPATH=-L$with_tcl/lib TCL_RPATH=:$with_tcl/lib fi if test "$with_tcl" != no ; then AC_CHECK_LIB(dl, dlopen, DL_LIB=-ldl) AC_CHECK_LIB(ld, main, DL_LIB=-lld) krb5_save_CPPFLAGS="$CPPFLAGS" krb5_save_LDFLAGS="$LDFLAGS" CPPFLAGS="$CPPFLAGS $TCL_INCLUDES" LDFLAGS="$LDFLAGS $TCL_LIBPATH" tcl_header=no AC_CHECK_HEADER(tcl.h,AC_DEFINE(HAVE_TCL_H) tcl_header=yes) if test $tcl_header=no; then AC_CHECK_HEADER(tcl/tcl.h,AC_DEFINE(HAVE_TCL_TCL_H) tcl_header=yes) fi if test $tcl_header = yes ; then tcl_lib=no if test $tcl_lib = no; then AC_CHECK_LIB(tcl8.0, Tcl_CreateCommand, TCL_LIBS="$TCL_LIBS -ltcl8.0 -lm $DL_LIB" tcl_lib=yes,,-lm $DL_LIB) fi if test $tcl_lib = no; then AC_CHECK_LIB(tcl7.6, Tcl_CreateCommand, TCL_LIBS="$TCL_LIBS -ltcl7.6 -lm $DL_LIB" tcl_lib=yes,,-lm $DL_LIB) fi if test $tcl_lib = no; then AC_CHECK_LIB(tcl7.5, Tcl_CreateCommand, TCL_LIBS="$TCL_LIBS -ltcl7.5 -lm $DL_LIB" tcl_lib=yes,,-lm $DL_LIB) fi if test $tcl_lib = no ; then AC_CHECK_LIB(tcl, Tcl_CreateCommand, TCL_LIBS="$TCL_LIBS -ltcl -lm $DL_LIB" tcl_lib=yes,,-lm $DL_LIB) fi if test $tcl_lib = no ; then AC_MSG_WARN("tcl.h found but not library") fi else AC_MSG_WARN(Could not find Tcl which is needed for the kadm5 tests) TCL_LIBS= fi CPPFLAGS="$krb5_save_CPPFLAGS" LDFLAGS="$krb5_save_LDFLAGS" AC_SUBST(TCL_INCLUDES) AC_SUBST(TCL_LIBS) AC_SUBST(TCL_LIBPATH) AC_SUBST(TCL_RPATH) else AC_MSG_RESULT("Not looking for Tcl library") fi ])dnl dnl dnl AC_KRB5_TCL - determine if the TCL library is present on system dnl AC_DEFUN(AC_KRB5_TCL,[ TCL_INCLUDES= TCL_LIBPATH= TCL_RPATH= TCL_LIBS= TCL_WITH= tcl_dir= AC_ARG_WITH(tcl, [ --with-tcl=path where Tcl resides], , with_tcl=try) if test "$with_tcl" = no ; then true elif test "$with_tcl" = yes -o "$with_tcl" = try ; then tcl_dir=/usr else tcl_dir=$with_tcl fi if test "$with_tcl" != no ; then AC_KRB5_TCL_FIND_CONFIG if test $tcl_lib = no ; then if test "$with_tcl" != try ; then AC_KRB5_TCL_TRYOLD else AC_MSG_WARN(Could not find Tcl which is needed for some tests) fi fi fi # If "yes" or pathname, error out if not found. if test "$with_tcl" != no -a "$with_tcl" != try ; then if test "$tcl_header $tcl_lib" != "yes yes" ; then AC_MSG_ERROR(Could not find Tcl) fi fi ])dnl dnl dnl WITH_HESIOD dnl AC_DEFUN(WITH_HESIOD, [AC_ARG_WITH(hesiod, AC_HELP_STRING(--with-hesiod[=path], compile with hesiod support), hesiod=$with_hesiod, with_hesiod=no) if test "$with_hesiod" != "no"; then HESIOD_DEFS=-DHESIOD AC_CHECK_LIB(resolv, res_send, res_lib=-lresolv) if test "$hesiod" != "yes"; then HESIOD_LIBS="-L${hesiod}/lib -lhesiod $res_lib" else HESIOD_LIBS="-lhesiod $res_lib" fi else HESIOD_DEFS= HESIOD_LIBS= fi AC_SUBST(HESIOD_DEFS) AC_SUBST(HESIOD_LIBS)]) dnl dnl KRB5_BUILD_LIBRARY dnl dnl Pull in the necessary stuff to create the libraries. AC_DEFUN(KRB5_BUILD_LIBRARY, [KRB5_BUILD_LIBRARY_WITH_DEPS # null out SHLIB_EXPFLAGS because we lack any dependencies SHLIB_EXPFLAGS=]) dnl dnl KRB5_BUILD_LIBRARY_STATIC dnl dnl Force static library build. AC_DEFUN(KRB5_AC_FORCE_STATIC,[dnl AC_BEFORE([$0],[KRB5_LIB_AUX])dnl krb5_force_static=yes]) AC_DEFUN(KRB5_BUILD_LIBRARY_STATIC, dnl Use define rather than AC_DEFUN to avoid ordering problems. [AC_REQUIRE([KRB5_AC_FORCE_STATIC])dnl KRB5_BUILD_LIBRARY # If we're only building static libraries, they're for build-time use only, # so don't install. LIBINSTLIST=]) dnl dnl KRB5_BUILD_LIBRARY_WITH_DEPS dnl dnl Like KRB5_BUILD_LIBRARY, but adds in explicit dependencies in the dnl generated shared library. AC_DEFUN(KRB5_BUILD_LIBRARY_WITH_DEPS, [AC_REQUIRE([KRB5_LIB_AUX])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_ARCHIVE])dnl AC_REQUIRE([AC_PROG_ARCHIVE_ADD])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl AC_CHECK_PROG(AR, ar, ar, false) AC_SUBST(LIBLIST) AC_SUBST(LIBLINKS) AC_SUBST(LDCOMBINE) AC_SUBST(LDCOMBINE_TAIL) AC_SUBST(SHLIB_EXPFLAGS) AC_SUBST(INSTALL_SHLIB) AC_SUBST(STLIBEXT) AC_SUBST(SHLIBEXT) AC_SUBST(SHLIBVEXT) AC_SUBST(SHLIBSEXT) AC_SUBST(DEPLIBEXT) AC_SUBST(PFLIBEXT) AC_SUBST(LIBINSTLIST)]) dnl dnl KRB5_BUILD_LIBOBJS dnl dnl Pull in the necessary stuff to build library objects. AC_DEFUN(KRB5_BUILD_LIBOBJS, [AC_REQUIRE([KRB5_LIB_AUX])dnl AC_SUBST(OBJLISTS) AC_SUBST(STOBJEXT) AC_SUBST(SHOBJEXT) AC_SUBST(PFOBJEXT) AC_SUBST(PICFLAGS) AC_SUBST(PROFFLAGS)]) dnl dnl KRB5_BUILD_PROGRAM dnl dnl Set variables to build a program. AC_DEFUN(KRB5_BUILD_PROGRAM, [AC_REQUIRE([KRB5_LIB_AUX])dnl AC_REQUIRE([KRB5_AC_NEED_LIBGEN])dnl AC_SUBST(CC_LINK) AC_SUBST(RPATH_FLAG) AC_SUBST(DEPLIBEXT)]) dnl dnl KRB5_RUN_FLAGS dnl dnl Set up environment for running dynamic execuatbles out of build tree AC_DEFUN(KRB5_RUN_FLAGS, [AC_REQUIRE([KRB5_LIB_AUX])dnl KRB5_RUN_ENV="$RUN_ENV" AC_SUBST(KRB5_RUN_ENV)]) dnl dnl KRB5_LIB_AUX dnl dnl Parse configure options related to library building. AC_DEFUN(KRB5_LIB_AUX, [AC_REQUIRE([KRB5_LIB_PARAMS])dnl # Check whether to build static libraries. AC_ARG_ENABLE([static], [ --disable-static don't build static libraries], , [enableval=yes]) if test "$enableval" = no && test "$krb5_force_static" != yes; then AC_MSG_RESULT([Disabling static libraries.]) LIBLINKS= LIBLIST= OBJLISTS= else LIBLIST='lib$(LIB)$(STLIBEXT)' LIBLINKS='$(TOPLIBD)/lib$(LIB)$(STLIBEXT)' OBJLISTS=OBJS.ST LIBINSTLIST=install-static DEPLIBEXT=$STLIBEXT fi # Check whether to build shared libraries. AC_ARG_ENABLE([shared], [ --enable-shared build shared libraries], [if test "$enableval" = yes; then case "$SHLIBEXT" in .so-nobuild) AC_MSG_WARN([shared libraries not supported on this architecture]) RUN_ENV= CC_LINK="$CC_LINK_STATIC" ;; *) # set this now because some logic below may reset SHLIBEXT DEPLIBEXT=$SHLIBEXT if test "$krb5_force_static" = "yes"; then AC_MSG_RESULT([Forcing static libraries.]) # avoid duplicate rules generation for AIX and such SHLIBEXT=.so-nobuild SHLIBVEXT=.so.v-nobuild SHLIBSEXT=.so.s-nobuild else AC_MSG_RESULT([Enabling shared libraries.]) # Clear some stuff in case of AIX, etc. if test "$STLIBEXT" = "$SHLIBEXT" ; then STLIBEXT=.a-nobuild LIBLIST= LIBLINKS= OBJLISTS= LIBINSTLIST= fi LIBLIST="$LIBLIST "'lib$(LIB)$(SHLIBEXT)' LIBLINKS="$LIBLINKS "'$(TOPLIBD)/lib$(LIB)$(SHLIBEXT) $(TOPLIBD)/lib$(LIB)$(SHLIBVEXT)' case "$SHLIBSEXT" in .so.s-nobuild) LIBINSTLIST="$LIBINSTLIST install-shared" ;; *) LIBLIST="$LIBLIST "'lib$(LIB)$(SHLIBSEXT)' LIBLINKS="$LIBLINKS "'$(TOPLIBD)/lib$(LIB)$(SHLIBSEXT)' LIBINSTLIST="$LIBINSTLIST install-shlib-soname" ;; esac OBJLISTS="$OBJLISTS OBJS.SH" fi CC_LINK="$CC_LINK_SHARED" ;; esac else RUN_ENV= CC_LINK="$CC_LINK_STATIC" SHLIBEXT=.so-nobuild SHLIBVEXT=.so.v-nobuild SHLIBSEXT=.so.s-nobuild fi], RUN_ENV= CC_LINK="$CC_LINK_STATIC" SHLIBEXT=.so-nobuild SHLIBVEXT=.so.v-nobuild SHLIBSEXT=.so.s-nobuild )dnl if test -z "$LIBLIST"; then AC_MSG_ERROR([must enable one of shared or static libraries]) fi # Check whether to build profiled libraries. AC_ARG_ENABLE([profiled], [ --enable-profiled build profiled libraries], [if test "$enableval" = yes; then case $PFLIBEXT in .po-nobuild) AC_MSG_RESULT([Profiled libraries not supported on this architecture.]) ;; *) AC_MSG_RESULT([Enabling profiled libraries.]) LIBLIST="$LIBLIST "'lib$(LIB)$(PFLIBEXT)' LIBLINKS="$LIBLINKS "'$(TOPLIBD)/lib$(LIB)$(PFLIBEXT)' OBJLISTS="$OBJLISTS OBJS.PF" LIBINSTLIST="$LIBINSTLIST install-profiled" ;; esac fi])]) dnl dnl KRB5_LIB_PARAMS dnl dnl Determine parameters related to libraries, e.g. various extensions. AC_DEFUN(KRB5_LIB_PARAMS, [AC_REQUIRE([AC_CANONICAL_HOST])dnl krb5_cv_host=$host AC_SUBST(krb5_cv_host) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([V5_SET_TOPDIR])dnl . $ac_topdir/config/shlib.conf]) dnl dnl The following was written by jhawk@mit.edu dnl dnl AC_LIBRARY_NET: Id: net.m4,v 1.4 1997/10/25 20:49:53 jhawk Exp dnl dnl This test is for network applications that need socket() and dnl gethostbyname() -ish functions. Under Solaris, those applications need to dnl link with "-lsocket -lnsl". Under IRIX, they should *not* link with dnl "-lsocket" because libsocket.a breaks a number of things (for instance: dnl gethostbyname() under IRIX 5.2, and snoop sockets under most versions of dnl IRIX). dnl dnl Unfortunately, many application developers are not aware of this, and dnl mistakenly write tests that cause -lsocket to be used under IRIX. It is dnl also easy to write tests that cause -lnsl to be used under operating dnl systems where neither are necessary (or useful), such as SunOS 4.1.4, which dnl uses -lnsl for TLI. dnl dnl This test exists so that every application developer does not test this in dnl a different, and subtly broken fashion. dnl dnl It has been argued that this test should be broken up into two seperate dnl tests, one for the resolver libraries, and one for the libraries necessary dnl for using Sockets API. Unfortunately, the two are carefully intertwined and dnl allowing the autoconf user to use them independantly potentially results in dnl unfortunate ordering dependancies -- as such, such component macros would dnl have to carefully use indirection and be aware if the other components were dnl executed. Since other autoconf macros do not go to this trouble, and almost dnl no applications use sockets without the resolver, this complexity has not dnl been implemented. dnl dnl The check for libresolv is in case you are attempting to link statically dnl and happen to have a libresolv.a lying around (and no libnsl.a). dnl AC_DEFUN(AC_LIBRARY_NET, [ # Most operating systems have gethostbyname() in the default searched # libraries (i.e. libc): AC_CHECK_FUNC(gethostbyname, , [ # Some OSes (eg. Solaris) place it in libnsl: AC_CHECK_LIB(nsl, gethostbyname, , [ # Some strange OSes (SINIX) have it in libsocket: AC_CHECK_LIB(socket, gethostbyname, , [ # Unfortunately libsocket sometimes depends on libnsl. # AC_CHECK_LIB's API is essentially broken so the following # ugliness is necessary: AC_CHECK_LIB(socket, gethostbyname, LIBS="-lsocket -lnsl $LIBS", [AC_CHECK_LIB(resolv, gethostbyname, LIBS="-lresolv $LIBS" ; RESOLV_LIB=-lresolv)], -lnsl) ]) ]) ]) AC_CHECK_FUNC(socket, , AC_CHECK_LIB(socket, socket, , AC_CHECK_LIB(socket, socket, LIBS="-lsocket -lnsl $LIBS", , -lnsl))) KRB5_AC_ENABLE_DNS if test "$enable_dns" = yes ; then AC_CHECK_FUNC(res_search, , AC_CHECK_LIB(resolv, res_search, LIBS="$LIBS -lresolv" ; RESOLV_LIB=-lresolv, AC_MSG_ERROR(Cannot find resolver support routine res_search in -lresolv.) )) fi AC_SUBST(RESOLV_LIB) ]) dnl dnl dnl KRB5_AC_ENABLE_DNS dnl AC_DEFUN(KRB5_AC_ENABLE_DNS, [ AC_MSG_CHECKING(if DNS Kerberos lookup support should be compiled in) AC_ARG_ENABLE([dns], [ --enable-dns build in support for Kerberos-related DNS lookups], , [enable_dns=default]) AC_ARG_ENABLE([dns-for-kdc], [ --enable-dns-for-kdc enable DNS lookups of Kerberos KDCs (default=YES)], , [case "$enable_dns" in yes | no) enable_dns_for_kdc=$enable_dns ;; *) enable_dns_for_kdc=yes ;; esac]) if test "$enable_dns_for_kdc" = yes; then AC_DEFINE(KRB5_DNS_LOOKUP_KDC,1,[Define to enable DNS lookups of Kerberos KDCs]) fi AC_ARG_ENABLE([dns-for-realm], [ --enable-dns-for-realm enable DNS lookups of Kerberos realm names], , [case "$enable_dns" in yes | no) enable_dns_for_realm=$enable_dns ;; *) enable_dns_for_realm=no ;; esac]) if test "$enable_dns_for_realm" = yes; then AC_DEFINE(KRB5_DNS_LOOKUP_REALM,1,[Define to enable DNS lookups of Kerberos realm names]) fi if test "$enable_dns_for_kdc,$enable_dns_for_realm" != no,no then # must compile in the support code if test "$enable_dns" = no ; then AC_MSG_ERROR(cannot both enable some DNS options and disable DNS support) fi enable_dns=yes fi if test "$enable_dns" = yes ; then AC_DEFINE(KRB5_DNS_LOOKUP, 1,[Define for DNS support of locating realms and KDCs]) else enable_dns=no fi AC_MSG_RESULT($enable_dns) dnl AC_MSG_CHECKING(if DNS should be used to find KDCs by default) dnl AC_MSG_RESULT($enable_dns_for_kdc) dnl AC_MSG_CHECKING(if DNS should be used to find realm name by default) dnl AC_MSG_RESULT($enable_dns_for_realm) ]) dnl dnl dnl Check if we need the prototype for a function - we give it a bogus dnl prototype and if it complains - then a valid prototype exists on the dnl system. dnl dnl KRB5_NEED_PROTO(includes, function, [bypass]) dnl if $3 set, don't see if library defined. dnl Useful for case where we will define in libkrb5 the function if need be dnl but want to know if a prototype exists in either case on system. dnl AC_DEFUN([KRB5_NEED_PROTO], [ ifelse([$3], ,[if test "x$ac_cv_func_$2" = xyes; then]) AC_CACHE_CHECK([if $2 needs a prototype provided], krb5_cv_func_$2_noproto, AC_TRY_COMPILE([$1], [struct k5foo {int foo; } xx; extern int $2 (struct k5foo*); $2(&xx); ], krb5_cv_func_$2_noproto=yes,krb5_cv_func_$2_noproto=no)) if test $krb5_cv_func_$2_noproto = yes; then AC_DEFINE([NEED_]translit($2, [a-z], [A-Z])[_PROTO], 1, dnl [define if the system header files are missing prototype for $2()]) fi ifelse([$3], ,[fi]) ]) dnl dnl ============================================================= dnl Internal function for testing for getpeername prototype dnl AC_DEFUN([TRY_PEER_INT],[ krb5_lib_var=`echo "$1 $2" | sed 'y% ./+-*%___p_p%'` AC_MSG_CHECKING([if getpeername() takes arguments $1 and $2]) AC_CACHE_VAL(krb5_cv_getpeername_proto$krb5_lib_var, [ AC_TRY_COMPILE([#include #include extern int getpeername(int, $1, $2); ],,eval "krb5_cv_getpeername_proto$krb5_lib_var=yes", eval "krb5_cv_getpeername_proto$krb5_lib_var=no")]) if eval "test \"`echo '$krb5_cv_getpeername_proto'$krb5_lib_var`\" = yes"; then AC_MSG_RESULT(yes) peer_set=yes res1=`echo "$1" | tr -d '*' | sed -e 's/ *$//'` res2=`echo "$2" | tr -d '*' | sed -e 's/ *$//'` AC_DEFINE_UNQUOTED([GETPEERNAME_ARG2_TYPE],$res1) AC_DEFINE_UNQUOTED([GETPEERNAME_ARG3_TYPE],$res2) else AC_MSG_RESULT(no) fi ]) dnl dnl Determines the types of the second and third arguments to getpeername() dnl Note: It is possible that noe of the combinations will work and the dnl code must deal AC_DEFUN([KRB5_GETPEERNAME_ARGS],[ peer_set=no for peer_arg1 in "struct sockaddr *" "void *" do for peer_arg2 in "size_t *" "int *" "socklen_t *" do if test $peer_set = no; then TRY_PEER_INT($peer_arg1, $peer_arg2) fi done done ]) dnl dnl ============================================================= dnl Internal function for testing for getsockname arguments dnl AC_DEFUN([TRY_GETSOCK_INT],[ krb5_lib_var=`echo "$1 $2" | sed 'y% ./+-*%___p_p%'` AC_MSG_CHECKING([if getsockname() takes arguments $1 and $2]) AC_CACHE_VAL(krb5_cv_getsockname_proto_$krb5_lib_var, [ AC_TRY_COMPILE([#include #include extern int getsockname(int, $1, $2); ],,eval "krb5_cv_getsockname_proto_$krb5_lib_var=yes", eval "krb5_cv_getsockname_proto_$krb5_lib_var=no")]) if eval "test \"`echo '$krb5_cv_getsockname_proto_'$krb5_lib_var`\" = yes"; then AC_MSG_RESULT(yes) sock_set=yes res1=`echo "$1" | tr -d '*' | sed -e 's/ *$//'` res2=`echo "$2" | tr -d '*' | sed -e 's/ *$//'` AC_DEFINE_UNQUOTED([GETSOCKNAME_ARG2_TYPE],$res1) AC_DEFINE_UNQUOTED([GETSOCKNAME_ARG3_TYPE],$res2) else AC_MSG_RESULT(no) fi ]) dnl dnl Determines the types of the second and third arguments to getsockname() dnl Note: It is possible that noe of the combinations will work and the dnl code must deal AC_DEFUN([KRB5_GETSOCKNAME_ARGS],[ sock_set=no for sock_arg1 in "struct sockaddr *" "void *" do for sock_arg2 in "size_t *" "int *" "socklen_t *" do if test $sock_set = no; then TRY_GETSOCK_INT($sock_arg1, $sock_arg2) fi done done ]) dnl dnl AC_DEFUN([KRB5_AC_CHOOSE_ET],[ AC_ARG_WITH([system-et], AC_HELP_STRING(--with-system-et,use system compile_et and -lcom_err @<:@default: build and install a local version@:>@)) AC_MSG_CHECKING(which version of com_err to use) if test "x$with_system_et" = xyes ; then COM_ERR_VERSION=sys AC_MSG_RESULT(system) else COM_ERR_VERSION=k5 AC_MSG_RESULT(krb5) fi if test $COM_ERR_VERSION = sys; then # check for various functions we need AC_CHECK_LIB(com_err, add_error_table, :, AC_MSG_ERROR(cannot find add_error_table in com_err library)) AC_CHECK_LIB(com_err, remove_error_table, :, AC_MSG_ERROR(cannot find remove_error_table in com_err library)) # make sure compile_et provides "et_foo" name cat >> conf$$e.et </dev/null 2>&1 ; then true ; else AC_MSG_ERROR(execution failed) fi AC_TRY_COMPILE([#include "conf$$e.h" ],[ et_foo_error_table; ],:, [AC_MSG_ERROR(cannot use et_foo_error_table)]) # Anything else we need to test for? rm -f conf$$e.et conf$$e.c conf$$e.h krb5_cv_compile_et_useful=yes ]) fi AC_SUBST(COM_ERR_VERSION) ]) AC_DEFUN([KRB5_AC_CHOOSE_SS],[ AC_ARG_WITH(system-ss, AC_HELP_STRING(--with-system-ss,use system -lss and mk_cmds @<:@default: use a private version@:>@)) AC_ARG_VAR(SS_LIB,[system libraries for 'ss' package, if --with-system-ss was specified [-lss]]) AC_MSG_CHECKING(which version of subsystem package to use) if test "x$with_system_ss" = xyes ; then SS_VERSION=sys AC_MSG_RESULT(system) # todo: check for various libraries we might need # in the meantime... test "x${SS_LIB+set}" = xset || SS_LIB=-lss old_LIBS="$LIBS" LIBS="$LIBS $SS_LIB" AC_CACHE_CHECK(whether system ss package works, krb5_cv_system_ss_okay,[ AC_TRY_RUN([ #include int main(int argc, char *argv[]) { if (argc == 42) { int i, err; i = ss_create_invocation("foo","foo","",0,&err); ss_listen(i); } return 0; }], krb5_cv_system_ss_okay=yes, AC_MSG_ERROR(cannot run test program), krb5_cv_system_ss_okay="assumed")]) LIBS="$old_LIBS" else SS_VERSION=k5 AC_MSG_RESULT(krb5) fi AC_SUBST(SS_LIB) AC_SUBST(SS_VERSION) ]) dnl AC_DEFUN([KRB5_AC_CHOOSE_DB],[ AC_ARG_WITH(system-db, AC_HELP_STRING(--with-system-db,use system Berkeley db library @<:@default: use a private version@:>@)) AC_ARG_VAR(DB_HEADER,[header file to include for Berkeley db package, if --with-system-db was specified [db.h]]) AC_ARG_VAR(DB_LIB,[system library for Berkeley db package, if --with-system-db was specified [-ldb]]) if test "x$with_system_db" = xyes ; then DB_VERSION=sys # TODO: Do we have specific routines we should check for? # How about known, easily recognizable bugs? # We want to use bt_rseq in some cases, but no other version but # ours has it right now. # # Okay, check the variables. test "x${DB_HEADER+set}" = xset || DB_HEADER=db.h test "x${DB_LIB+set}" = xset || DB_LIB=-ldb # if test "x${DB_HEADER}" = xdb.h ; then DB_HEADER_VERSION=sys else DB_HEADER_VERSION=redirect fi KDB5_DB_LIB="$DB_LIB" else DB_VERSION=k5 AC_DEFINE(HAVE_BT_RSEQ,1,[Define if bt_rseq is available, for recursive btree traversal.]) DB_HEADER=db.h DB_HEADER_VERSION=k5 # libdb gets sucked into libkdb KDB5_DB_LIB= # needed for a couple of things that need libdb for its own sake DB_LIB=-ldb fi AC_SUBST(DB_VERSION) AC_SUBST(DB_HEADER) AC_SUBST(DB_HEADER_VERSION) AC_SUBST(DB_LIB) AC_SUBST(KDB5_DB_LIB) ]) dnl dnl dnl KRB5_AC_NEED_BIND_8_COMPAT --- check to see if we are on a bind 9 system dnl dnl AC_DEFUN(KRB5_AC_NEED_BIND_8_COMPAT,[ AC_REQUIRE([AC_PROG_CC])dnl dnl dnl On a bind 9 system, we need to define BIND_8_COMPAT dnl AC_MSG_CHECKING(for bind 9 or higher) AC_CACHE_VAL(krb5_cv_need_bind_8_compat,[ AC_TRY_COMPILE([#include ], [HEADER hdr;], krb5_cv_need_bind_8_compat=no, [AC_TRY_COMPILE([#define BIND_8_COMPAT #include ], [HEADER hdr;], krb5_cv_need_bind_8_compat=yes, krb5_cv_need_bind_8_compat=no)])]) AC_MSG_RESULT($krb5_cv_need_bind_8_compat) test $krb5_cv_need_bind_8_compat = yes && AC_DEFINE(BIND_8_COMPAT,1,[Define if OS has bind 9]) ]) dnl