\input texinfo @c -*-texinfo-*- @c %**start of header @c guide @setfilename krb5-user.info @settitle Kerberos V5 UNIX User's Guide @setchapternewpage odd @c chapter begins on next odd page @c @setchapternewpage on @c chapter begins on next page @c @smallbook @c Format for 7" X 9.25" paper @c %**end of header @paragraphindent 0 @iftex @parskip 6pt plus 6pt @end iftex @include definitions.texinfo @set EDITION 1.0 @finalout @c don't print black warning boxes @titlepage @title @value{PRODUCT} UNIX User's Guide @subtitle Release: @value{RELEASE} @subtitle Document Edition: @value{EDITION} @subtitle Last updated: @value{UPDATED} @author @value{COMPANY} @page @vskip 0pt plus 1filll @end titlepage @comment node-name, next, previous, up @node Top, Copyright, (dir), (dir) @ifinfo This file describes how to use the @value{PRODUCT} client programs. @end ifinfo @c The master menu is updated using emacs19's M-x texinfo-all-menus-update @c function. Don't forget to run M-x texinfo-every-node-update after @c you add a new section or subsection, or after you've rearranged the @c comand before each @section or @subsection! All you need to enter @c is: @c @c @section New Section Name @c @c M-x texinfo-every-node-update will take care of calculating the @c node's forward and back pointers. @c @c --------------------------------------------------------------------- @menu * Copyright:: * Introduction:: * Kerberos V5 Tutorial:: * Kerberos V5 Reference:: * Kerberos Glossary:: @end menu @node Copyright, Introduction, Top, Top @unnumbered Copyright @include copyright.texinfo @node Introduction, Kerberos V5 Tutorial, Copyright, Top @chapter Introduction @ifset CYGNUS @value{PRODUCT} is based on the Kerberos V5 authentication system developed at MIT. @end ifset @ifset MIT Kerberos V5 is an authentication system developed at MIT. @end ifset Kerberos is named for the three-headed watchdog from Greek mythology, who guarded the entrance to the underworld. Under Kerberos, a client (generally either a user or a service) sends a request for a ticket to the @i{Key Distribution Center} (KDC). The KDC creates a @dfn{ticket-granting ticket} (TGT) for the client, encrypts it using the client's password as the key, and sends the encrypted TGT back to the client. The client then attempts to decrypt the TGT, using its password. If the client successfully decrypts the TGT (@i{i.e.}, if the client gave the correct password), it keeps the decrypted TGT, which indicates proof of the client's identity. The TGT, which expires at a specified time, permits the client to obtain additional tickets, which give permission for specific services. The requesting and granting of these additional tickets is user-transparent. Since Kerberos negotiates authenticated, and optionally encrypted, communications between two points anywhere on the internet, it provides a layer of security that is not dependent on which side of a firewall either client is on. Since studies have shown that half of the computer security breaches in industry happen from @i{inside} firewalls, @value{COMPANY}'s @value{PRODUCT} plays a vital role in maintaining your network security. The @value{PRODUCT} package is designed to be easy to use. Most of the commands are nearly identical to UNIX network programs you already use. @value{PRODUCT} is a @dfn{single-sign-on} system, which means that you have to type your password only once per session, and Kerberos does the authenticating and encrypting transparently. @menu * What is a Ticket?:: * What is a Kerberos Principal?:: @end menu @node What is a Ticket?, What is a Kerberos Principal?, Introduction, Introduction @section What is a Ticket? Your Kerberos @dfn{credentials}, or ``@dfn{tickets}'', are a set of electronic information that can be used to verify your identity. Your Kerberos tickets may be stored in a file, or they may exist only in memory. The first ticket you obtain is a @dfn{ticket-granting ticket}, which permits you to obtain additional tickets. These additional tickets give you permission for specific services. The requesting and granting of these additional tickets happens transparently. A good analogy for the ticket-granting ticket is a three-day ski pass that is good at four different resorts. You show the pass at whichever resort you decide to go to (until it expires), and you receive a lift ticket for that resort. Once you have the lift ticket, you can ski all you want at that resort. If you go to another resort the next day, you once again show your pass, and you get an additional lift ticket for the new resort. The difference is that the @value{PRODUCT} programs notice that you have the weekend ski pass, and get the lift ticket for you, so you don't have to perform the transactions yourself. @node What is a Kerberos Principal?, , What is a Ticket?, Introduction @section What is a Kerberos Principal? A Kerberos @dfn{principal} is a unique identity to which Kerberos can assign tickets. Principals can have an arbitrary number of components. Each component is separated by a component separator, generally `/'. The last component is the realm, separated from the rest of the principal by the realm separator, generally `@@'. If there is no realm component in the principal, then it will be assumed that the principal is in the default realm for the context in which it is being used. Traditionally, a principal is divided into three parts: the @dfn{primary}, the @dfn{instance}, and the @dfn{realm}. The format of a typical Kerberos V5 principal is @code{primary/instance@@REALM}. @itemize @bullet @item The @dfn{primary} is the first part of the principal. In the case of a user, it's the same as your username. For a host, the primary is the word @code{host}. @item The @dfn{instance} is an optional string that qualifies the primary. The instance is separated from the primary by a slash (@code{/}). In the case of a user, the instance is usually null, but a user might also have an additional principal, with an instance called @samp{admin}, which he/she uses to administrate a database. The principal @code{@value{RANDOMUSER1}@@@value{PRIMARYREALM}} is completely separate from the principal @code{@value{RANDOMUSER1}/admin@@@value{PRIMARYREALM}}, with a separate password, and separate permissions. In the case of a host, the instance is the fully qualified hostname, e.g., @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}. @item The @dfn{realm} is your Kerberos realm. In most cases, your Kerberos realm is your domain name, in upper-case letters. For example, the machine @code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}} would be in the realm @code{@value{SECONDREALM}}. @end itemize @node Kerberos V5 Tutorial, Kerberos V5 Reference, Introduction, Top @chapter Kerberos V5 Tutorial This tutorial is intended to familiarize you with the @value{PRODUCT} client programs. We will represent your prompt as ``@code{shell%}''. So an instruction to type the ``@kbd{ls}'' command would be represented as follows: @need 600 @smallexample @group @b{shell%} ls @end group @end smallexample In these examples, we will use sample usernames, such as @code{@value{RANDOMUSER1}} and @code{@value{RANDOMUSER2}}, sample hostnames, such as @code{@value{RANDOMHOST1}} and @code{@value{RANDOMHOST2}}, and sample domain names, such as @code{@value{PRIMARYDOMAIN}} and @code{@value{SECONDDOMAIN}}. When you see one of these, substitute your username, hostname, or domain name accordingly. @menu * Setting Up to Use Kerberos V5:: * Ticket Management:: * Password Management:: * Kerberos V5 Applications:: @end menu @node Setting Up to Use Kerberos V5, Ticket Management, Kerberos V5 Tutorial, Kerberos V5 Tutorial @section Setting Up to Use @value{PRODUCT} Your system administrator will have installed the @value{PRODUCT} programs in whichever directory makes the most sense for your system. We will use @code{@value{ROOTDIR}} throughout this guide to refer to the top-level directory @value{PRODUCT} directory. We will therefor use @code{@value{BINDIR}} to denote the location of the @value{PRODUCT} user programs. In your installation, the directory name may be different, but whatever the directory name is, you should make sure it is included in your path. You will probably want to put it @i{ahead of} the directories @code{/bin} and @code{/usr/bin} so you will get the @value{PRODUCT} network programs, rather than the standard UNIX versions, when you type their command names. @node Ticket Management, Password Management, Setting Up to Use Kerberos V5, Kerberos V5 Tutorial @section Ticket Management On many systems, Kerberos is built into the login program, and you get tickets automatically when you log in. Other programs, such as @code{rsh}, @code{rcp}, @code{telnet}, and @code{rlogin}, can forward copies of your tickets to the remote host. Most of these programs also automatically destroy your tickets when they exit. However, @value{COMPANY} recommends that you explicitly destroy your Kerberos tickets when you are through with them, just to be sure. One way to help ensure that this happens is to add the @code{kdestroy} command to your @code{.logout} file. Additionally, if you are going to be away from your machine and are concerned about an intruder using your permissions, it is safest to either destroy all copies of your tickets, or use a screensaver that locks the screen. @need 2000 @menu * Kerberos Ticket Properties:: * Obtaining Tickets with kinit:: * Viewing Your Tickets with klist:: * Destroying Your Tickets with kdestroy:: @end menu @node Kerberos Ticket Properties, Obtaining Tickets with kinit, Ticket Management, Ticket Management @subsection Kerberos Ticket Properties @noindent There are various properties that Kerberos tickets can have: If a ticket is @dfn{forwardable}, then the KDC can issue a new ticket with a different network address based on the forwardable ticket. This allows for authentication forwarding without requiring a password to be typed in again. For example, if a user with a forwardable TGT logs into a remote system, the KDC could issue a new TGT for that user with the netword address of the remote system, allowing authentication on that host to work as though the user were logged in locally. When the KDC creates a new ticket based on a forwardable ticket, it sets the @dfn{forwarded} flag on that new ticket. Any tickets that are created based on a ticket with the forwarded flag set will also have their forwarded flags set. A @dfn{proxiable} ticket is similar to a forwardable ticket in that it allows a service to take on the identity of the client. Unlike a forwardable ticket, however, a proxiable ticket is only issued for specific services. In other words, a ticket-granting ticket cannot be issued based on a ticket that is proxiable but not forwardable. A @dfn{proxy} ticket is one that was issued based on a proxiable ticket. A @dfn{postdated} ticket is issued with the @i{invalid} flag set. After the starting time listed on the ticket, it can be presented to the KDC to obtain valid tickets. Tickets with the @dfn{postdateable} flag set can be used to issue postdated tickets. @dfn{Renewable} tickets can be used to obtain new session keys without the user entering their password again. A renewable ticket has two expiration times. The first is the time at which this particular ticket expires. The second is the latest possible expiration time for any ticket issued based on this renewable ticket. A ticket with the @dfn{initial} flag set was issued based on the authentication protocol, and not on a ticket-granting ticket. Clients that wish to ensure that the user's key has been recently presented for verification could specify that this flag must be set to accept the ticket. An @dfn{invalid} ticket must be rejected by application servers. Postdated tickets are usually issued with this flag set, and must be validated by the KDC before they can be used. A @dfn{preauthenticated} ticket is one that was only issued after the client requesting the ticket had authenticated itself to the KDC. The @dfn{hardware authentication} flag is set on a ticket which required the use of hardware for authentication. The hardware is expected to be possessed only by the client which requested the tickets. If a ticket has the @dfn{transit policy checked} flag set, then the KDC that issued this ticket implements the transited-realm check policy and checked the transited-realms list on the ticket. The transited-realms list contains a list of all intermediate realms between the realm of the KDC that issued the first ticket and that of the one that issued the current ticket. If this flag is not set, then the application server must check the transited realms itself or else reject the ticket. The @dfn{okay as delegate} flag indicates that the server specified in the ticket is suitable as a delegate as determined by the policy of that realm. A server that is acting as a delegate has been granted a proxy or a forwarded TGT. This flag is a new addition to the @value{PRODUCT} protocol and is not yet implemented on MIT servers. An @dfn{anonymous} ticket is one in which the named principal is a generic principal for that realm; it does not actually specify the individual that will be using the ticket. This ticket is meant only to securely distribute a session key. This is a new addition to the @value{PRODUCT} protocol and is not yet implemented on MIT servers. @node Obtaining Tickets with kinit, Viewing Your Tickets with klist, Kerberos Ticket Properties, Ticket Management @subsection Obtaining Tickets with kinit If your site is using the @value{PRODUCT} login program, you will get Kerberos tickets automatically when you log in. If your site uses a different login program, you may need to explicitly obtain your Kerberos tickets, using the @code{kinit} program. Similarly, if your Kerberos tickets expire, use the @code{kinit} program to obtain new ones. @need 1500 To use the @code{kinit} program, simply type @kbd{kinit} and then type your password at the prompt. For example, Jennifer (whose username is @code{@value{RANDOMUSER1}}) works for Bleep, Inc. (a fictitious company with the domain name @code{@value{PRIMARYDOMAIN}} and the Kerberos realm @code{@value{PRIMARYREALM}}). She would type: @smallexample @group @b{shell%} kinit @b{Password for @value{RANDOMUSER1}@@@value{PRIMARYREALM}:} @i{<-- [Type @value{RANDOMUSER1}'s password here.]} @b{shell%} @end group @end smallexample @need 1000 If you type your password incorrectly, kinit will give you the following error message: @smallexample @group @b{shell%} kinit @b{Password for @value{RANDOMUSER1}@@@value{PRIMARYREALM}:} @i{<-- [Type the wrong password here.]} @b{kinit: Password incorrect} @b{shell%} @end group @end smallexample @noindent and you won't get Kerberos tickets. @noindent Notice that @code{kinit} assumes you want tickets for your own username in your default realm. @need 1500 Suppose Jennifer's friend David is visiting, and he wants to borrow a window to check his mail. David needs to get tickets for himself in his own realm, @value{SECONDREALM}.@footnote{Note: the realm @value{SECONDREALM} must be listed in your computer's Kerberos configuration file, @code{/etc/krb5.conf}.} He would type: @smallexample @group @b{shell%} kinit @value{RANDOMUSER2}@@@value{SECONDREALM} @b{Password for @value{RANDOMUSER2}@@@value{SECONDREALM}:} @i{<-- [Type @value{RANDOMUSER2}'s password here.]} @b{shell%} @end group @end smallexample @noindent David would then have tickets which he could use to log onto his own machine. Note that he typed his password locally on Jennifer's machine, but it never went over the network. Kerberos on the local host performed the authentication to the KDC in the other realm. @need 1000 If you want to be able to forward your tickets to another host, you need to request @dfn{forwardable} tickets. You do this by specifying the @kbd{-f} option: @smallexample @group @b{shell%} kinit -f @b{Password for @value{RANDOMUSER1}@@@value{PRIMARYREALM}:} @i{<-- [Type your password here.]} @b{shell%} @end group @end smallexample @noindent Note that @code{kinit} does not tell you that it obtained forwardable tickets; you can verify this using the @code{klist} command (@pxref{Viewing Your Tickets with klist}). Normally, your tickets are good for your system's default ticket lifetime, which is ten hours on many systems. You can specify a different ticket lifetime with the @samp{-l} option. Add the letter @samp{s} to the value for seconds, @samp{m} for minutes, @samp{h} for hours, or @samp{d} for days. @need 1500 For example, to obtain forwardable tickets for @code{@value{RANDOMUSER2}@@@value{SECONDREALM}} that would be good for three hours, you would type: @smallexample @group @b{shell%} kinit -f -l 3h @value{RANDOMUSER2}@@@value{SECONDREALM} @b{Password for @value{RANDOMUSER2}@@@value{SECONDREALM}:} @i{<-- [Type @value{RANDOMUSER2}'s password here.]} @b{shell%} @end group @end smallexample @noindent You cannot mix units; specifying a lifetime of @samp{3h30m} would result in an error. Note also that most systems specify a maximum ticket lifetime. If you request a longer ticket lifetime, it will be automatically truncated to the maximum lifetime. @node Viewing Your Tickets with klist, Destroying Your Tickets with kdestroy, Obtaining Tickets with kinit, Ticket Management @subsection Viewing Your Tickets with klist The @code{klist} command shows your tickets. When you first obtain tickets, you will have only the ticket-granting ticket. (@xref{What is a Ticket?}.) The listing would look like this: @smallexample @group @b{shell%} klist Ticket cache: /tmp/krb5cc_ttypa Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM} Valid starting Expires Service principal 06/07/04 19:49:21 06/08/04 05:49:19 krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM} @b{shell%} @end group @end smallexample @noindent The ticket cache is the location of your ticket file. In the above example, this file is named @code{/tmp/krb5cc_ttypa}. The default principal is your kerberos @dfn{principal}. (@pxref{What is a Kerberos Principal?}) The ``valid starting'' and ``expires'' fields describe the period of time during which the ticket is valid. The @dfn{service principal} describes each ticket. The ticket-granting ticket has the primary @code{krbtgt}, and the instance is the realm name. @need 2000 Now, if @value{RANDOMUSER1} connected to the machine @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, and then typed @kbd{klist} again, she would have gotten the following result: @smallexample @group @b{shell%} klist Ticket cache: /tmp/krb5cc_ttypa Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM} Valid starting Expires Service principal 06/07/04 19:49:21 06/08/04 05:49:19 krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM} 06/07/04 20:22:30 06/08/04 05:49:19 host/@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}@@@value{PRIMARYREALM} @b{shell%} @end group @end smallexample @noindent Here's what happened: when @value{RANDOMUSER1} used telnet to connect to the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, the telnet program presented her ticket-granting ticket to the KDC and requested a host ticket for the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}. The KDC sent the host ticket, which telnet then presented to the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, and she was allowed to log in without typing her password. @need 3000 Suppose your Kerberos tickets allow you to log into a host in another domain, such as @code{@value{RANDOMHOST2}.@value{SECONDDOMAIN}}, which is also in another Kerberos realm, @code{@value{SECONDREALM}}. If you telnet to this host, you will receive a ticket-granting ticket for the realm @code{@value{SECONDREALM}}, plus the new @code{host} ticket for @code{@value{RANDOMHOST2}.@value{SECONDDOMAIN}}. @kbd{klist} will now show: @smallexample @group @b{shell%} klist Ticket cache: /tmp/krb5cc_ttypa Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM} Valid starting Expires Service principal 06/07/04 19:49:21 06/08/04 05:49:19 krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM} 06/07/04 20:22:30 06/08/04 05:49:19 host/@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}@@@value{PRIMARYREALM} 06/07/04 20:24:18 06/08/04 05:49:19 krbtgt/@value{SECONDREALM}@@@value{PRIMARYREALM} 06/07/04 20:24:18 06/08/04 05:49:19 host/@value{RANDOMHOST2}.@value{SECONDDOMAIN}@@@value{PRIMARYREALM} @b{shell%} @end group @end smallexample You can use the @code{-f} option to view the @dfn{flags} that apply to your tickets. The flags are: @table @b @itemx F @b{F}orwardable @itemx f @b{f}orwarded @itemx P @b{P}roxiable @itemx p @b{p}roxy @itemx D post@b{D}ateable @itemx d post@b{d}ated @itemx R @b{R}enewable @itemx I @b{I}nitial @itemx i @b{i}nvalid @itemx H @b{H}ardware authenticated @itemx A pre@b{A}uthenticated @itemx T @b{T}ransit policy checked @itemx O @b{O}kay as delegate @itemx a @b{a}nonymous @end table @need 1500 Here is a sample listing. In this example, the user @value{RANDOMUSER1} obtained her initial tickets (@samp{I}), which are forwardable (@samp{F}) and postdated (@samp{d}) but not yet validated (@samp{i}). (@xref{kinit Reference}, for more information about postdated tickets.) @smallexample @group @b{shell%} klist -f @b{Ticket cache: /tmp/krb5cc_320 Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM} Valid starting Expires Service principal 31/07/05 19:06:25 31/07/05 19:16:25 krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM} Flags: FdiI shell%} @end group @end smallexample @need 1500 In the following example, the user @value{RANDOMUSER2}'s tickets were forwarded (@samp{f}) to this host from another host. The tickets are reforwardable (@samp{F}). @smallexample @group @b{shell%} klist -f @b{Ticket cache: /tmp/krb5cc_p11795 Default principal: @value{RANDOMUSER2}@@@value{SECONDREALM} Valid starting Expires Service principal 07/31/05 11:52:29 07/31/05 21:11:23 krbtgt/@value{SECONDREALM}@@@value{SECONDREALM} Flags: Ff 07/31/05 12:03:48 07/31/05 21:11:23 host/@value{RANDOMHOST2}.@value{SECONDDOMAIN}@@@value{SECONDREALM} Flags: Ff shell%} @end group @end smallexample @node Destroying Your Tickets with kdestroy, , Viewing Your Tickets with klist, Ticket Management @subsection Destroying Your Tickets with kdestroy Your Kerberos tickets are proof that you are indeed yourself, and tickets can be stolen. If this happens, the person who has them can masquerade as you until they expire. For this reason, you should destroy your Kerberos tickets when you are away from your computer. @need 1000 Destroying your tickets is easy. Simply type @kbd{kdestroy}. @smallexample @group @b{shell%} kdestroy @b{shell%} @end group @end smallexample @need 1500 If @code{kdestroy} fails to destroy your tickets, it will beep and give an error message. For example, if @code{kdestroy} can't find any tickets to destroy, it will give the following message: @smallexample @group @b{shell%} kdestroy @b{kdestroy: No credentials cache file found while destroying cache shell%} @end group @end smallexample @node Password Management, Kerberos V5 Applications, Ticket Management, Kerberos V5 Tutorial @section Password Management Your password is the only way Kerberos has of verifying your identity. If someone finds out your password, that person can masquerade as you---send email that comes from you, read, edit, or delete your files, or log into other hosts as you---and no one will be able to tell the difference. For this reason, it is important that you choose a good password (@pxref{Password Advice}), and keep it secret. If you need to give access to your account to someone else, you can do so through Kerberos. (@xref{Granting Access to Your Account}.) You should @i{never} tell your password to anyone, including your system administrator, for any reason. You should change your password frequently, particularly any time you think someone may have found out what it is. @menu * Changing Your Password:: * Password Advice:: * Granting Access to Your Account:: @end menu @node Changing Your Password, Password Advice, Password Management, Password Management @subsection Changing Your Password @need 2500 To change your Kerberos password, use the @code{kpasswd} command. It will ask you for your old password (to prevent someone else from walking up to your computer when you're not there and changing your password), and then prompt you for the new one twice. (The reason you have to type it twice is to make sure you have typed it correctly.) For example, user @code{@value{RANDOMUSER2}} would do the following: @smallexample @group @b{shell%} kpasswd @b{Password for @value{RANDOMUSER2}:} @i{<- Type your old password.} @b{Enter new password:} @i{<- Type your new password.} @b{Enter it again:} @i{<- Type the new password again.} @b{Password changed.} @b{shell%} @end group @end smallexample @need 1800 If @value{RANDOMUSER2} typed the incorrect old password, he would get the following message: @smallexample @group @b{shell%} kpasswd @b{Password for @value{RANDOMUSER2}:} @i{<- Type the incorrect old password.} @b{kpasswd: Password incorrect while getting initial ticket shell%} @end group @end smallexample @need 2500 If you make a mistake and don't type the new password the same way twice, @code{kpasswd} will ask you to try again: @smallexample @group @b{shell%} kpasswd @b{Password for @value{RANDOMUSER2}:} @i{<- Type the old password.} @b{Enter new password:} @i{<- Type the new password.} @b{Enter it again:} @i{<- Type a different new password.} @b{kpasswd: Password mismatch while reading password shell%} @end group @end smallexample Once you change your password, it takes some time for the change to propagate through the system. Depending on how your system is set up, this might be anywhere from a few minutes to an hour or more. If you need to get new Kerberos tickets shortly after changing your password, try the new password. If the new password doesn't work, try again using the old one. @node Password Advice, Granting Access to Your Account, Changing Your Password, Password Management @subsection Password Advice Your password can include almost any character you can type (except control keys and the ``enter'' key). A good password is one you can remember, but that no one else can easily guess. Examples of @i{bad} passwords are words that can be found in a dictionary, any common or popular name, especially a famous person (or cartoon character), your name or username in any form (@i{e.g.}, forward, backward, repeated twice, @i{etc.}), your spouse's, child's, or pet's name, your birth date, your social security number, and any sample password that appears in this (or any other) manual. @need 2200 @value{COMPANY} recommends that your password be at least 6 characters long, and contain UPPER- and lower-case letters, numbers, and/or punctuation marks. Some passwords that would be good if they weren't listed in this manual include: @itemize @bullet @item some initials, like ``GykoR-66.'' for ``Get your kicks on Route 66.'' @item an easy-to-pronounce nonsense word, like ``slaRooBey'' or ``krang-its'' @item a misspelled phrase, like ``2HotPeetzas!'' or ``ItzAGurl!!!'' @end itemize @noindent Note: don't actually use any of the above passwords. They're only meant to show you how to make up a good password. Passwords that appear in a manual are the first ones intruders will try. @need 3800 @value{PRODUCT} allows your system administrators to automatically reject bad passwords, based on certain criteria, such as a password dictionary or a minimum length. For example, if the user @code{@value{RANDOMUSER1}}, who had a policy "strict" that required a minimum of 8 characaters, chose a password that was less than 8 characters, Kerberos would give an error message like the following: @smallexample @group @b{shell%} kpasswd @b{Password for @value{RANDOMUSER1}:} @i{<- Type your old password here.} @value{RANDOMUSER1}'s password is controlled by the policy strict, which requires a minimum of 8 characters from at least 3 classes (the five classes are lowercase, uppercase, numbers, punctuation, and all other characters). @b{Enter new password:} @i{<- Type an insecure new password.} @b{Enter it again:} @i{<- Type it again.} kpasswd: Password is too short while attempting to change password. Please choose another password. @b{Enter new password:} @i{<- Type a good password here.} @b{Enter it again:} @i{<- Type it again.} @b{Password changed. shell%} @end group @end smallexample @noindent Your system administrators can choose the message that is displayed if you choose a bad password, so the message you see may be different from the above example. @node Granting Access to Your Account, , Password Advice, Password Management @subsection Granting Access to Your Account @need 1800 If you need to give someone access to log into your account, you can do so through Kerberos, without telling the person your password. Simply create a file called @code{.k5login} in your home directory. This file should contain the Kerberos principal (@xref{What is a Kerberos Principal?}.) of each person to whom you wish to give access. Each principal must be on a separate line. Here is a sample @code{.k5login} file: @smallexample @group @value{RANDOMUSER1}@@@value{PRIMARYREALM} @value{RANDOMUSER2}@@@value{SECONDREALM} @end group @end smallexample @noindent This file would allow the users @code{@value{RANDOMUSER1}} and @code{@value{RANDOMUSER2}} to use your user ID, provided that they had Kerberos tickets in their respective realms. If you will be logging into other hosts across a network, you will want to include your own Kerberos principal in your @code{.k5login} file on each of these hosts. @need 1000 Using a @code{.k5login} file is much safer than giving out your password, because: @itemize @bullet @item You can take access away any time simply by removing the principal from your @code{.k5login} file. @item Although the user has full access to your account on one particular host (or set of hosts if your @code{.k5login} file is shared, @i{e.g.}, over NFS), that user does not inherit your network privileges. @item Kerberos keeps a log of who obtains tickets, so a system administrator could find out, if necessary, who was capable of using your user ID at a particular time. @end itemize One common application is to have a @code{.k5login} file in @code{root}'s home directory, giving root access to that machine to the Kerberos principals listed. This allows system administrators to allow users to become root locally, or to log in remotely as @code{root}, without their having to give out the root password, and without anyone having to type the root password over the network. @node Kerberos V5 Applications, , Password Management, Kerberos V5 Tutorial @section Kerberos V5 Applications @value{PRODUCT} is a @dfn{single-sign-on} system. This means that you only have to type your password once, and the @value{PRODUCT} programs do the authenticating (and optionally encrypting) for you. The way this works is that Kerberos has been built into each of a suite of network programs. For example, when you use a @value{PRODUCT} program to connect to a remote host, the program, the KDC, and the remote host perform a set of rapid negotiations. When these negotiations are completed, your program has proven your identity on your behalf to the remote host, and the remote host has granted you access, all in the space of a few seconds. The @value{PRODUCT} applications are versions of existing UNIX network programs with the Kerberos features added. @menu * Overview of Additional Features:: * telnet:: * rlogin:: * FTP:: * rsh:: * rcp:: * ksu:: @end menu @node Overview of Additional Features, telnet, Kerberos V5 Applications, Kerberos V5 Applications @subsection Overview of Additional Features The @value{PRODUCT} @dfn{network programs} are those programs that connect to another host somewhere on the internet. These programs include @code{rlogin}, @code{telnet}, @code{ftp}, @code{rsh}, @code{rcp}, and @code{ksu}. These programs have all of the original features of the corresponding non-Kerberos @code{rlogin}, @code{telnet}, @code{ftp}, @code{rsh}, @code{rcp}, and @code{su} programs, plus additional features that transparently use your Kerberos tickets for negotiating authentication and optional encryption with the remote host. In most cases, all you'll notice is that you no longer have to type your password, because Kerberos has already proven your identity. The @value{PRODUCT} network programs allow you the options of forwarding your tickets to the remote host (if you obtained forwardable tickets with the @code{kinit} program; @pxref{Obtaining Tickets with kinit}), and encrypting data transmitted between you and the remote host. This section of the tutorial assumes you are familiar with the non-Kerberos versions of these programs, and highlights the Kerberos functions added in the @value{PRODUCT} package. @node telnet, rlogin, Overview of Additional Features, Kerberos V5 Applications @subsection telnet The @value{PRODUCT} @code{telnet} command works exactly like the standard UNIX telnet program, with the following Kerberos options added: @table @kbd @itemx -f forwards a copy of your tickets to the remote host. @itemx -F forwards a copy of your tickets to the remote host, and marks them re-forwardable from the remote host. @itemx -k @i{realm} requests tickets for the remote host in the specified realm, instead of determining the realm itself. @itemx -K uses your tickets to authenticate to the remote host, but does not log you in. @itemx -a attempt automatic login using your tickets. @code{telnet} will assume the same username unless you explicitly specify another. @itemx -x turns on encryption. @end table @need 4000 For example, if @code{@value{RANDOMUSER2}} wanted to use the standard UNIX telnet to connect to the machine @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, he would type: @smallexample @group @b{shell%} telnet @value{RANDOMHOST1}.@value{SECONDDOMAIN} @b{Trying 128.0.0.5 ... Connected to @value{RANDOMHOST1}.@value{SECONDDOMAIN}. Escape character is '^]'. NetBSD/i386 (daffodil) (ttyp3) login:} @value{RANDOMUSER2} @b{Password:} @i{<- @value{RANDOMUSER2} types his password here} @b{Last login: Fri Jun 21 17:13:11 from @value{RANDOMHOST2}.@value{PRIMARYDOMAIN} Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved. NetBSD 1.1: Tue May 21 00:31:42 EDT 1996 Welcome to NetBSD! shell%} @end group @end smallexample @noindent Note that the machine @code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}} asked for @code{@value{RANDOMUSER2}}'s password. When he typed it, his password was sent over the network unencrypted. If an intruder were watching network traffic at the time, that intruder would know @code{@value{RANDOMUSER2}}'s password. @need 4000 If, on the other hand, @code{@value{RANDOMUSER1}} wanted to use the @value{PRODUCT} telnet to connect to the machine @code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}}, she could forward a copy of her tickets, request an encrypted session, and log on as herself as follows: @smallexample @group @b{shell%} telnet -a -f -x @value{RANDOMHOST2}.@value{PRIMARYDOMAIN} @b{Trying 128.0.0.5... Connected to @value{RANDOMHOST2}.@value{PRIMARYDOMAIN}. Escape character is '^]'. [ Kerberos V5 accepts you as ``@value{RANDOMUSER1}@@@value{PRIMARYDOMAIN}'' ] [ Kerberos V5 accepted forwarded credentials ] What you type is protected by encryption. Last login: Tue Jul 30 18:47:44 from @value{RANDOMHOST}.@value{SECONDDOMAIN} Athena Server (sun4) Version 9.1.11 Tue Jul 30 14:40:08 EDT 2002 shell%} @end group @end smallexample @noindent Note that @code{@value{RANDOMUSER1}}'s machine used Kerberos to authenticate her to @code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}}, and logged her in automatically as herself. She had an encrypted session, a copy of her tickets already waiting for her, and she never typed her password. If you forwarded your Kerberos tickets, @code{telnet} automatically destroys them when it exits. The full set of options to @value{PRODUCT} @code{telnet} are discussed in the Reference section of this manual. (@pxref{telnet Reference}) @need 2000 @node rlogin, FTP, telnet, Kerberos V5 Applications @subsection rlogin @need 1000 The @value{PRODUCT} @code{rlogin} command works exactly like the standard UNIX rlogin program, with the following Kerberos options added: @table @kbd @itemx -f forwards a copy of your tickets to the remote host. @itemx -F forwards a copy of your tickets to the remote host, and marks them re-forwardable from the remote host. @itemx -k @i{realm} requests tickets for the remote host in the specified realm, instead of determining the realm itself. @itemx -x encrypts the input and output data streams (the username is sent unencrypted) @end table @need 3000 For example, if @code{@value{RANDOMUSER2}} wanted to use the standard UNIX rlogin to connect to the machine @code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}}, he would type: @smallexample @group @b{shell%} rlogin @value{RANDOMHOST1}.@value{SECONDDOMAIN} -l @value{RANDOMUSER2} @b{Password:} @i{<- @value{RANDOMUSER2} types his password here} @b{Last login: Fri Jun 21 10:36:32 from :0.0 Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved. NetBSD 1.1: Tue May 21 00:31:42 EDT 1996 Welcome to NetBSD! shell%} @end group @end smallexample @noindent Note that the machine @code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}} asked for @code{@value{RANDOMUSER2}}'s password. When he typed it, his password was sent over the network unencrypted. If an intruder were watching network traffic at the time, that intruder would know @code{@value{RANDOMUSER2}}'s password. @need 4000 If, on the other hand, @code{@value{RANDOMUSER1}} wanted to use @value{PRODUCT} rlogin to connect to the machine @code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}}, she could forward a copy of her tickets, mark them as not forwardable from the remote host, and request an encrypted session as follows: @smallexample @group @b{shell%} rlogin @value{RANDOMHOST2}.@value{PRIMARYDOMAIN} -f -x @b{This rlogin session is using DES encryption for all data transmissions. Last login: Thu Jun 20 16:20:50 from @value{RANDOMHOST1} Athena Server (sun4) Version 9.1.11 Tue Jul 30 14:40:08 EDT 2002 shell%} @end group @end smallexample @noindent Note that @code{@value{RANDOMUSER1}}'s machine used Kerberos to authenticate her to @code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}}, and logged her in automatically as herself. She had an encrypted session, a copy of her tickets were waiting for her, and she never typed her password. If you forwarded your Kerberos tickets, @code{rlogin} automatically destroys them when it exits. The full set of options to @value{PRODUCT} @code{rlogin} are discussed in the Reference section of this manual. (@pxref{rlogin Reference}) @node FTP, rsh, rlogin, Kerberos V5 Applications @subsection FTP @need 1000 The @value{PRODUCT} @code{FTP} program works exactly like the standard UNIX FTP program, with the following Kerberos features added: @table @kbd @itemx -k @i{realm} requests tickets for the remote host in the specified realm, instead of determining the realm itself. @itemx -f requests that your tickets be forwarded to the remote host. The @kbd{-f} argument must be the last argument on the command line. @itemx protect @i{level} (issued at the @code{ftp>} prompt) sets the protection level. ``Clear'' is no protection; ``safe'' ensures data integrity by verifying the checksum, and ``private'' encrypts the data. Encryption also ensures data integrity. @end table @need 5000 For example, suppose @code{@value{RANDOMUSER1}} wants to get her @code{RMAIL} file from the directory @code{~@value{RANDOMUSER1}/Mail}, on the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}. She wants to encrypt the file transfer. The exchange would look like the following: @smallexample @group @b{shell%} ftp @value{RANDOMHOST1}.@value{PRIMARYDOMAIN} Connected to @value{RANDOMHOST1}.@value{PRIMARYDOMAIN}. 220 @value{RANDOMHOST1}.@value{PRIMARYDOMAIN} FTP server (Version 5.60) ready. 334 Using authentication type GSSAPI; ADAT must follow GSSAPI accepted as authentication type GSSAPI authentication succeeded 200 Data channel protection level set to private. Name (@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}:@value{RANDOMUSER1}): 232 GSSAPI user @value{RANDOMUSER1}@@@value{PRIMARYREALM} is authorized as @value{RANDOMUSER1} 230 User @value{RANDOMUSER1} logged in. Remote system type is UNIX. Using binary mode to transfer files. ftp> protect private 200 Protection level set to Private. ftp> cd ~@value{RANDOMUSER1}/MAIL 250 CWD command successful. ftp> get RMAIL 227 Entering Passive Mode (128,0,0,5,16,49) 150 Opening BINARY mode data connection for RMAIL (361662 bytes). 226 Transfer complete. 361662 bytes received in 2.5 seconds (1.4e+02 Kbytes/s) ftp> quit @b{shell%} @end group @end smallexample The full set of options to @value{PRODUCT} @code{FTP} are discussed in the Reference section of this manual. (@pxref{FTP Reference}) @node rsh, rcp, FTP, Kerberos V5 Applications @subsection rsh The @value{PRODUCT} @code{rsh} program works exactly like the standard UNIX rlogin program, with the following Kerberos features added: @table @kbd @itemx -f forwards a copy of your tickets to the remote host. @itemx -F forwards a copy of your tickets to the remote host, and marks them re-forwardable from the remote host. @itemx -k @i{realm} requests tickets for the remote host in the specified realm, instead of determining the realm itself. @itemx -x encrypts the input and output data streams (the command line is not encrypted) @end table @need 1800 For example, if your Kerberos tickets allowed you to run programs on the host @* @code{@value{RANDOMHOST2}@@@value{SECONDDOMAIN}} as root, you could run the @samp{date} program as follows: @smallexample @group @b{shell%} rsh @value{RANDOMHOST2}.@value{SECONDDOMAIN} -l root -x date @b{This rsh session is using DES encryption for all data transmissions. Tue Jul 30 19:34:21 EDT 2002 shell%} @end group @end smallexample If you forwarded your Kerberos tickets, @code{rsh} automatically destroys them when it exits. The full set of options to @value{PRODUCT} @code{rsh} are discussed in the Reference section of this manual. (@pxref{rsh Reference}) @node rcp, ksu, rsh, Kerberos V5 Applications @subsection rcp @need 1000 The @value{PRODUCT} @code{rcp} program works exactly like the standard UNIX rcp program, with the following Kerberos features added: @table @kbd @itemx -k @i{realm} requests tickets for the remote host in the specified realm, instead of determining the realm itself. @itemx -x turns on encryption. @end table @need 1500 For example, if you wanted to copy the file @code{/etc/motd} from the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}} into the current directory, via an encrypted connection, you would simply type: @smallexample @b{shell%} rcp -x @value{RANDOMHOST1}.@value{PRIMARYDOMAIN}:/etc/motd . @end smallexample The @kbd{rcp} program negotiates authentication and encryption transparently. The full set of options to @value{PRODUCT} @code{rcp} are discussed in the Reference section of this manual. (@pxref{rcp Reference}) @node ksu, , rcp, Kerberos V5 Applications @subsection ksu The @value{PRODUCT} @code{ksu} program replaces the standard UNIX su program. @code{ksu} first authenticates you to Kerberos. Depending on the configuration of your system, @code{ksu} may ask for your Kerberos password if authentication fails. @emph{Note that you should never type your password if you are remotely logged in using an unencrypted connection.} Once @code{ksu} has authenticated you, if your Kerberos principal appears in the target's @code{.k5login} file (@pxref{Granting Access to Your Account}) or in the target's @code{.k5users} file (see below), it switches your user ID to the target user ID. @need 2000 For example, @code{@value{RANDOMUSER2}} has put @code{@value{RANDOMUSER1}}'s Kerberos principal in his @code{.k5login} file. If @code{@value{RANDOMUSER1}} uses @code{ksu} to become @code{@value{RANDOMUSER2}}, the exchange would look like this. (To differentiate between the two shells, @code{@value{RANDOMUSER1}}'s prompt is represented as @code{@value{RANDOMUSER1}%} and @code{@value{RANDOMUSER2}}'s prompt is represented as @code{@value{RANDOMUSER2}%}.) @smallexample @group @b{@value{RANDOMUSER1}%} ksu @value{RANDOMUSER2} @b{Account @value{RANDOMUSER2}: authorization for @value{RANDOMUSER1}@@@value{PRIMARYREALM} successful Changing uid to @value{RANDOMUSER2} (3382) @value{RANDOMUSER2}%} @end group @end smallexample @noindent Note that the new shell has a copy of @code{@value{RANDOMUSER1}}'s tickets. The ticket filename contains @code{@value{RANDOMUSER2}}'s UID with @samp{.1} appended to it: @smallexample @group @b{@value{RANDOMUSER2}%} klist @b{Ticket cache: /tmp/krb5cc_3382.1 Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM} Valid starting Expires Service principal 07/31/04 21:53:01 08/01/04 07:52:53 krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM} 07/31/04 21:53:39 08/01/04 07:52:53 host/@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}@@@value{PRIMARYREALM} @value{RANDOMUSER2}%} @end group @end smallexample @need 2500 If @code{@value{RANDOMUSER1}} had not appeared in @code{@value{RANDOMUSER2}}'s @code{.k5login} file (and the system was configured to ask for a password), the exchange would have looked like this (assuming @code{@value{RANDOMUSER2}} has taken appropriate precautions in protecting his password): @smallexample @group @b{@value{RANDOMUSER1}%} ksu @value{RANDOMUSER2} @b{WARNING: Your password may be exposed if you enter it here and are logged in remotely using an unsecure (non-encrypted) channel. Kerberos password for @value{RANDOMUSER2}@@@value{PRIMARYREALM}:} @i{<- @code{@value{RANDOMUSER1}} types the wrong password here.} @b{ksu: Password incorrect Authentication failed. @value{RANDOMUSER1}%} @end group @end smallexample Now, suppose @code{@value{RANDOMUSER2}} did not want to give @code{@value{RANDOMUSER1}} full access to his account, but wanted to give her permission to list his files and use the "more" command to view them. He could create a @code{.k5users} file giving her permission to run only those specific commands. @need 3500 The @code{.k5users} file is like the @code{.k5login} file, except that each principal is optionally followed by a list of commands. @code{ksu} will let those principals execute only the commands listed, using the @kbd{-e} option. @code{@value{RANDOMUSER2}}'s @code{.k5users} file might look like the following: @smallexample @group @value{RANDOMUSER1}@@@value{PRIMARYREALM} /bin/ls /usr/bin/more @value{ADMINUSER}@@@value{PRIMARYREALM} /bin/ls @value{ADMINUSER}/admin@@@value{PRIMARYREALM} * @value{RANDOMUSER2}@@@value{SECONDREALM} @end group @end smallexample @noindent The above @code{.k5users} file would let @code{@value{RANDOMUSER1}} run only the commands @code{/bin/ls} and @code{/usr/bin/more}. It would let @code{@value{ADMINUSER}} run only the command @code{/bin/ls} if he had regular tickets, but if he had tickets for his @code{admin} instance, @code{@value{ADMINUSER}/admin@@@value{PRIMARYREALM}}, he would be able to execute any command. The last line gives @code{@value{RANDOMUSER2}} in the realm @value{SECONDREALM} permission to execute any command. (@i{I.e.}, having only a Kerberos principal on a line is equivalent to giving that principal permission to execute @code{*}.) This is so that @value{RANDOMUSER2} can allow himself to execute commands when he logs in, using Kerberos, from a machine in the realm @value{SECONDREALM}. @need 2500 Then, when @code{@value{RANDOMUSER1}} wanted to list his home directory, she would type: @smallexample @group @b{@value{RANDOMUSER1}%} ksu @value{RANDOMUSER2} -e ls ~@value{RANDOMUSER2} @b{Authenticated @value{RANDOMUSER1}@@@value{PRIMARYREALM} Account @value{RANDOMUSER2}: authorization for @value{RANDOMUSER1}@@@value{PRIMARYREALM} for execution of /bin/ls successful Changing uid to @value{RANDOMUSER2} (3382) Mail News Personal misc bin @value{RANDOMUSER1}%} @end group @end smallexample @noindent If @code{@value{RANDOMUSER1}} had tried to give a different command to @code{ksu}, it would have prompted for a password as with the previous example. Note that unless the @code{.k5users} file gives the target permission to run any command, the user must use @code{ksu} with the @kbd{-e} @i{command} option. @need 1000 The @code{ksu} options you are most likely to use are: @table @kbd @itemx -n @i{principal} specifies which Kerberos principal you want to use for @code{ksu}. (@i{e.g.}, the user @code{@value{ADMINUSER}} might want to use his @code{admin} instance. @xref{What is a Ticket?}.) @itemx -c specifies the location of your Kerberos credentials cache (ticket file). @itemx -k tells @code{ksu} not to destroy your Kerberos tickets when @code{ksu} is finished. @itemx -f requests forwardable tickets. (@xref{Obtaining Tickets with kinit}.) This is only applicable if @code{ksu} needs to obtain tickets. @itemx -l @i{lifetime} sets the ticket lifetime. (@xref{Obtaining Tickets with kinit}.) This is only applicable if @code{ksu} needs to obtain tickets. @itemx -z tells @code{ksu} to copy your Kerberos tickets only if the UID you are switching is the same as the Kerberos primary (either yours or the one specified by the @kbd{-n} option). @itemx -Z tells @code{ksu} not to copy any Kerberos tickets to the new UID. @itemx -e @i{command} tells @code{ksu} to execute @i{command} and then exit. See the description of the @code{.k5users} file above. @itemx -a @i{text} (at the end of the command line) tells @code{ksu} to pass everything after @samp{-a} to the target shell. @end table The full set of options to @value{PRODUCT} @code{ksu} are discussed in the Reference section of this manual. (@pxref{ksu Reference}) @node Kerberos V5 Reference, Kerberos Glossary, Kerberos V5 Tutorial, Top @chapter Kerberos V5 Reference This section will include copies of the manual pages for the @value{PRODUCT} client programs. You can read the manual entry for any command by typing @code{man} @i{command}, where @i{command} is the name of the command for which you want to read the manual entry. For example, to read the @code{kinit} manual entry, you would type: @smallexample @b{shell%} man kinit @end smallexample Note: To be able to view the @value{PRODUCT} manual pages on line, you may need to add the directory @code{@value{ROOTDIR}/man} to your MANPATH environment variable. (Remember to replace @code{@value{ROOTDIR}} with the top-level directory in which @value{PRODUCT} is installed.) For example, if you had the the following line in your @code{.login} file@footnote{The MANPATH variable may be specified in a different initialization file, depending on your operating system. Some of the files in which you might specify environment variables include @code{.login}, @code{.profile}, or @code{.cshrc}.}: @smallexample setenv MANPATH /usr/local/man:/usr/man @end smallexample @noindent and the @value{PRODUCT} man pages were in the directory @code{/usr/@value{LCPRODUCT}/man}, you would change the line to the following: @smallexample setenv MANPATH /usr/@value{LCPRODUCT}/man:/usr/local/man:/usr/man @end smallexample @ifinfo Note to info users: the manual pages are not available within this info tree. You can read them from emacs with the command: @smallexample M-x manual-entry @emph{command} @end smallexample @end ifinfo @page @menu * kinit Reference:: * klist Reference:: * ksu Reference:: * kdestroy Reference:: * kpasswd Reference:: * telnet Reference:: * FTP Reference:: * rlogin Reference:: * rsh Reference:: * rcp Reference:: @end menu @node kinit Reference, klist Reference, Kerberos V5 Reference, Kerberos V5 Reference @section kinit Reference @iftex @special{psfile=kinit1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{kinit}} @page @special{psfile=kinit2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{kinit}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry kinit} to read this manual page. @end ifinfo @ifhtml @html kinit manpage @end html @end ifhtml @node klist Reference, ksu Reference, kinit Reference, Kerberos V5 Reference @section klist Reference @iftex @special{psfile=klist1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{klist}} @page @end iftex @iftex @special{psfile=klist2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{klist}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry klist} to read this manual page. @end ifinfo @ifhtml @html klist manpage @end html @end ifhtml @node ksu Reference, kdestroy Reference, klist Reference, Kerberos V5 Reference @section ksu Reference @iftex @special{psfile=ksu1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{ksu}} @page @special{psfile=ksu2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{ksu}} @page @special{psfile=ksu3.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{ksu}} @page @special{psfile=ksu4.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{ksu}} @page @special{psfile=ksu5.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{ksu}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry ksu} to read this manual page. @end ifinfo @ifhtml @html ksu manpage @end html @end ifhtml @node kdestroy Reference, kpasswd Reference, ksu Reference, Kerberos V5 Reference @section kdestroy Reference @iftex @special{psfile=kdestroy1.ps voffset=-700 hoffset=-60} @centerline{Reference Manual for @code{kdestroy}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry kdestroy} to read this manual page. @end ifinfo @ifhtml @html kdestroy manpage @end html @end ifhtml @node kpasswd Reference, telnet Reference, kdestroy Reference, Kerberos V5 Reference @section kpasswd Reference @iftex @special{psfile=kpasswd1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{kpasswd}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry kpasswd} to read this manual page. @end ifinfo @ifhtml @html kpasswd manpage @end html @end ifhtml @node telnet Reference, FTP Reference, kpasswd Reference, Kerberos V5 Reference @section telnet Reference @iftex @special{psfile=telnet1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet3.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet4.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet5.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet6.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet7.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet8.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @special{psfile=telnet9.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{telnet}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry telnet} to read this manual page. @end ifinfo @ifhtml @html telnet manpage @end html @end ifhtml @node FTP Reference, rlogin Reference, telnet Reference, Kerberos V5 Reference @section FTP Reference @iftex @special{psfile=ftp1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp3.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp4.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp5.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp6.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp7.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp8.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @special{psfile=ftp9.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{FTP}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry FTP} to read this manual page. @end ifinfo @ifhtml @html ftp manpage @end html @end ifhtml @node rlogin Reference, rsh Reference, FTP Reference, Kerberos V5 Reference @section rlogin Reference @iftex @special{psfile=rlogin1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{rlogin}} @page @special{psfile=rlogin2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{rlogin}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry rlogin} to read this manual page. @end ifinfo @ifhtml @html rlogin manpage @end html @end ifhtml @node rsh Reference, rcp Reference, rlogin Reference, Kerberos V5 Reference @section rsh Reference @iftex @special{psfile=rsh1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{rsh}} @page @special{psfile=rsh2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{rsh}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry rsh} to read this manual page. @end ifinfo @ifhtml @html rsh manpage @end html @end ifhtml @node rcp Reference, , rsh Reference, Kerberos V5 Reference @section rcp Reference @iftex @special{psfile=rcp1.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{rcp}} @page @end iftex @iftex @special{psfile=rcp2.ps voffset=-700 hoffset=-40} @centerline{Reference Manual for @code{rcp}} @page @end iftex @ifinfo Type @kbd{M-x manual-entry rcp} to read this manual page. @end ifinfo @ifhtml @html rcp manpage @end html @end ifhtml @node Kerberos Glossary, , Kerberos V5 Reference, Top @appendix Kerberos Glossary @include glossary.texinfo @contents @bye