#
# This is the Apache server configuration file providing SSL support using.
# the mod_nss plugin.  It contains the configuration directives to instruct
# the server how to serve pages over an https connection.
# 
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#

#
# When we also provide SSL we have to listen to the 
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen [SECURE_PORT]

Listen [NON_CLIENTAUTH_SECURE_PORT]

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#
#   Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
#NSSPassPhraseDialog  builtin
NSSPassPhraseDialog  defer:[SERVER_ROOT]/conf/password.conf


#   Pass Phrase Helper:
#   This helper program stores the token password pins between
#   restarts of Apache.
NSSPassPhraseHelper /usr/share/pki/ra/scripts/nss_pcache

#   Configure the SSL Session Cache. 
#   SSLSessionCacheSize is the number of entries in the cache.
#   SSLSessionCacheTimeout is the SSL2 session timeout (in seconds).
#   SSL3SessionCacheTimeout is the SSL3/TLS session timeout (in seconds).
NSSSessionCacheSize 10000
NSSSessionCacheTimeout 100
NSSSession3CacheTimeout 86400

##
## SSL Virtual Host Context
##

<VirtualHost _default_:[SECURE_PORT]>

#   General setup for the virtual host
#DocumentRoot "/htdocs"
#ServerName [Server_Name]:[Secure_Port]
#ServerAdmin you@example.com

# Configure OCSP checking of client certs

#NSSOCSP on
#NSSOCSPDefaultResponder on

# URL of the ocsp service
#
#   Example of the built in ocsp service of the  CS CA
#
#NSSOCSPDefaultURL http://localhost:9180/ca/ocsp

# Nickname of ocsp signing cert
#
#    Below is sufficient if using built in CS CA ocsp service
#    If using outboard ocsp, make sure the cert listed below
#    is imported into the local cert database.
#
#NSSOCSPDefaultName caCert 

# mod_ssl logs to separate log files, you can choose to do that if you'd like
ErrorLog [SERVER_ROOT]/logs/error_log
TransferLog [SERVER_ROOT]/logs/access_log

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
NSSEngine on

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_nss documentation for a complete list.
NSSCipherSuite -des,-desede3,-rc2,-rc2export,-rc4,-rc4export,+rsa_3des_sha,-rsa_des_56_sha,+rsa_des_sha,-rsa_null_md5,-rsa_null_sha,-rsa_rc2_40_md5,+rsa_rc4_128_md5,-rsa_rc4_128_sha,-rsa_rc4_40_md5,-rsa_rc4_56_sha,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-fips_des_sha,+fips_3des_sha,-rsa_aes_128_sha,-rsa_aes_256_sha,+ecdhe_ecdsa_aes_256_sha

NSSProtocol SSLv3,TLSv1

#   SSL Certificate Nickname:
#   The nickname of the server certificate you are going to use.
NSSNickname "Server-Cert cert-[PKI_INSTANCE_ID]"

#   Server Certificate Database:
#   The NSS security database directory that holds the certificates and
#   keys. The database consists of 3 files: cert8.db, key3.db and secmod.db.
#   Provide the directory that these files exist.
NSSCertificateDatabase  [SERVER_ROOT]/alias

#   Client Authentication (Type):
#   Client certificate verification type.  Types are none, optional and
#   require.
NSSVerifyClient require

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_nss documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context. 
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
    NSSOptions +StdEnvVars +ExportCertData
</Files>
<Directory "/cgi-bin">
    NSSOptions +StdEnvVars
</Directory>

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
#CustomLog [SERVER_ROOT]/logs/ssl_request_log \
#          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>                                  

<VirtualHost _default_:[NON_CLIENTAUTH_SECURE_PORT]>

#   General setup for the virtual host
#DocumentRoot "/htdocs"
#ServerName [Server_Name]:[Non_Clientauth_Secure_Port]
#ServerAdmin you@example.com

# mod_ssl logs to separate log files, you can choose to do that if you'd like
ErrorLog [SERVER_ROOT]/logs/error_log
TransferLog [SERVER_ROOT]/logs/access_log

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
NSSEngine on

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_nss documentation for a complete list.
NSSCipherSuite -des,-desede3,-rc2,-rc2export,-rc4,-rc4export,+rsa_3des_sha,-rsa_des_56_sha,+rsa_des_sha,-rsa_null_md5,-rsa_null_sha,-rsa_rc2_40_md5,+rsa_rc4_128_md5,-rsa_rc4_128_sha,-rsa_rc4_40_md5,-rsa_rc4_56_sha,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-fips_des_sha,+fips_3des_sha,-rsa_aes_128_sha,-rsa_aes_256_sha,+ecdhe_ecdsa_aes_256_sha

NSSProtocol SSLv3,TLSv1

#   SSL Certificate Nickname:
#   The nickname of the server certificate you are going to use.
NSSNickname "Server-Cert cert-[PKI_INSTANCE_ID]"

#   Server Certificate Database:
#   The NSS security database directory that holds the certificates and
#   keys. The database consists of 3 files: cert8.db, key3.db and secmod.db.
#   Provide the directory that these files exist.
NSSCertificateDatabase  [SERVER_ROOT]/alias

#   Client Authentication (Type):
#   Client certificate verification type.  Types are none, optional and
#   require.
NSSVerifyClient none

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_nss documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context. 
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
    NSSOptions +StdEnvVars +ExportCertData
</Files>
<Directory "/cgi-bin">
    NSSOptions +StdEnvVars
</Directory>

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
#CustomLog [SERVER_ROOT]/logs/ssl_request_log \
#          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>