/** BEGIN COPYRIGHT BLOCK * This Program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software * Foundation; version 2 of the License. * * This Program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along with * this Program; if not, write to the Free Software Foundation, Inc., 59 Temple * Place, Suite 330, Boston, MA 02111-1307 USA. * * In addition, as a special exception, Red Hat, Inc. gives You the additional * right to link the code of this Program with code not covered under the GNU * General Public License ("Non-GPL Code") and to distribute linked combinations * including the two, subject to the limitations in this paragraph. Non-GPL Code * permitted under this exception must only link to the code of this Program * through those well defined interfaces identified in the file named EXCEPTION * found in the source code files (the "Approved Interfaces"). The files of * Non-GPL Code may instantiate templates or use macros or inline functions from * the Approved Interfaces without causing the resulting work to be covered by * the GNU General Public License. Only Red Hat, Inc. may make changes or * additions to the list of Approved Interfaces. You must obey the GNU General * Public License in all respects for all of the Program code and other code used * in conjunction with the Program except the Non-GPL Code covered by this * exception. If you modify this file, you may extend this exception to your * version of the file, but you are not obligated to do so. If you do not wish to * provide this exception without modification, you must delete this exception * statement from your version and license this file solely under the GPL without * exception. * * * Copyright (C) 2001 Sun Microsystems, Inc. Used by permission. * Copyright (C) 2005 Red Hat, Inc. * All rights reserved. * END COPYRIGHT BLOCK **/ #include #undef OFF #undef LITTLE_ENDIAN #include #include #include #include #if !defined(_WIN32) && !defined(aix) #include #else #include #endif #include #include #include #include #if defined( _WIN32 ) #include "ntslapdmessages.h" #include "proto-ntutil.h" #else #include #include #include #include #include #include /* getpwnam */ #if !defined(IRIX) && !defined(LINUX) union semun { int val; struct semid_ds *buf; ushort *array; }; #endif #endif #if !defined(_WIN32) #include /* dup2 */ #include #include #include /* MAXPATHLEN */ #endif #if defined(__sun) #include #include #endif #include "slap.h" #include "slapi-plugin.h" #include "prinit.h" #include "snmp_collator.h" #include "fe.h" /* client_auth_init() */ #include "protect_db.h" #include "getopt_ext.h" #include "fe.h" #ifndef LDAP_DONT_USE_SMARTHEAP #include "smrtheap.h" #endif #if defined( XP_WIN32 ) void dostounixpath(char *szText); #endif /* Forward Declarations */ static void register_objects(); static void process_command_line(int argc, char **argv, char *myname, char **extraname); static int slapd_exemode_ldif2db(); static int slapd_exemode_db2ldif(int argc, char **argv); static int slapd_exemode_db2index(); static int slapd_exemode_archive2db(); static int slapd_exemode_db2archive(); static int slapd_exemode_upgradedb(); static int slapd_exemode_dbtest(); static int slapd_exemode_suffix2instance(); static int slapd_debug_level_string2level( const char *s ); static void slapd_debug_level_log( int level ); static void slapd_debug_level_usage( void ); static void cmd_set_shutdown(int); /* * global variables */ static int slapd_exemode = SLAPD_EXEMODE_UNKNOWN; static int init_cmd_shutdown_detect() { #ifndef _WIN32 /* First of all, we must reset the signal mask to get rid of any blockages * the process may have inherited from its parent (such as the console), which * might result in the process not delivering those blocked signals, and thus, * misbehaving.... */ { int rc; sigset_t proc_mask; LDAPDebug( LDAP_DEBUG_TRACE, "Reseting signal mask....\n", 0, 0, 0); (void)sigemptyset( &proc_mask ); rc = pthread_sigmask( SIG_SETMASK, &proc_mask, NULL ); LDAPDebug( LDAP_DEBUG_TRACE, " %s \n", rc ? "Failed to reset signal mask":"....Done (signal mask reset)!!", 0, 0 ); } #endif #if defined ( HPUX10 ) PR_CreateThread ( PR_USER_THREAD, catch_signals, NULL, PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, PR_UNJOINABLE_THREAD, SLAPD_DEFAULT_THREAD_STACKSIZE); #elif defined ( HPUX11 ) /* In the optimized builds for HPUX, the signal handler doesn't seem * to get set correctly unless the primordial thread gets a chance * to run before we make the call to SIGNAL. (At this point the * the primordial thread has spawned the daemon thread which called * this function.) The call to DS_Sleep will give the primordial * thread a chance to run. */ DS_Sleep(0); #endif #ifndef _WIN32 (void) SIGNAL( SIGPIPE, SIG_IGN ); (void) SIGNAL( SIGCHLD, slapd_wait4child ); #ifndef LINUX /* linux uses USR1/USR2 for thread synchronization, so we aren't * allowed to mess with those. */ (void) SIGNAL( SIGUSR1, slapd_do_nothing ); (void) SIGNAL( SIGUSR2, cmd_set_shutdown ); #endif (void) SIGNAL( SIGTERM, cmd_set_shutdown ); (void) SIGNAL( SIGHUP, cmd_set_shutdown ); (void) SIGNAL( SIGINT, cmd_set_shutdown ); #endif /* _WIN32 */ return 0; } static void cmd_set_shutdown (int sig) { /* don't log anything from a signal handler: * you could be holding a lock when the signal was trapped. more * specifically, you could be holding the logfile lock (and deadlock * yourself). */ #if 0 LDAPDebug( LDAP_DEBUG_ANY, "slapd got shutdown signal\n", 0, 0, 0 ); #endif c_set_shutdown(); #ifndef _WIN32 #ifndef LINUX /* don't mess with USR1/USR2 on linux, used by libpthread */ (void) SIGNAL( SIGUSR2, cmd_set_shutdown ); #endif (void) SIGNAL( SIGTERM, cmd_set_shutdown ); (void) SIGNAL( SIGHUP, cmd_set_shutdown ); #endif } #ifdef HPUX10 extern void collation_init(); #endif #ifndef WIN32 /* Four cases: - change ownership of all files in directory (strip_fn=PR_FALSE) - change ownership of all files in directory; but trailing fn needs to be stripped (strip_fn=PR_TRUE) - fn is relative to root directory (/access); we print error message and let user shoot his foot - fn is relative to current directory (access); we print error message and let user shoot his other foot The docs say any valid filename. */ static void chown_dir_files(char *name, struct passwd *pw, PRBool strip_fn) { PRDir *dir; PRDirEntry *entry; char file[MAXPATHLEN + 1]; char *log=NULL, *ptr=NULL; int rc=0; log=strdup(name); if(strip_fn) { if((ptr=strrchr(log,'/'))==NULL) { LDAPDebug(LDAP_DEBUG_ANY, "Caution changing ownership of ./%s \n",name,0,0); slapd_chown_if_not_owner(log, pw->pw_uid, -1 ); rc=1; } else if(log==ptr) { LDAPDebug(LDAP_DEBUG_ANY, "Caution changing ownership of / directory and its contents to %s\n",pw->pw_name,0,0); *(++ptr)='\0'; } else { *ptr='\0'; } } if ((!rc) && ((dir = PR_OpenDir(log)) != NULL )) { /* change the owner for each of the files in the dir */ while( (entry = PR_ReadDir(dir , PR_SKIP_BOTH )) !=NULL ) { PR_snprintf(file,MAXPATHLEN+1,"%s/%s",log,entry->name); slapd_chown_if_not_owner( file, pw->pw_uid, -1 ); } PR_CloseDir( dir ); } free(log); } /* Changes the owner of the files in the logs and * config directory to the user that the server runs as. */ static void fix_ownership() { struct passwd* pw=NULL; char dirname[MAXPATHLEN + 1]; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); if ( slapdFrontendConfig->localuser != NULL ) { if ( (pw = getpwnam( slapdFrontendConfig->localuser )) == NULL ) return; } else { return; } /* config directory needs to be owned by the local user */ if (slapdFrontendConfig->configdir) { chown_dir_files(slapdFrontendConfig->configdir, pw, PR_FALSE); } /* do access log file, if any */ if (slapdFrontendConfig->accesslog) { chown_dir_files(slapdFrontendConfig->accesslog, pw, PR_TRUE); } /* do audit log file, if any */ if (slapdFrontendConfig->auditlog) { chown_dir_files(slapdFrontendConfig->auditlog, pw, PR_TRUE); } /* do error log file, if any */ if (slapdFrontendConfig->errorlog) { chown_dir_files(slapdFrontendConfig->errorlog, pw, PR_TRUE); } } #endif /* Changes identity to the named user * If username == NULL, does nothing. * Does nothing on NT regardless. */ static int main_setuid(char *username) { #ifndef _WIN32 if (username != NULL) { struct passwd *pw; /* Make sure everything in the log and config directory * is owned by the correct user */ fix_ownership(); pw = getpwnam (username); if (pw == NULL) { int oserr = errno; LDAPDebug (LDAP_DEBUG_ANY, "getpwnam(%s) == NULL, error %d (%s)\n", username, oserr, slapd_system_strerror(oserr)); } else { if (setgid (pw->pw_gid) != 0) { int oserr = errno; LDAPDebug (LDAP_DEBUG_ANY, "setgid(%li) != 0, error %d (%s)\n", (long)pw->pw_gid, oserr, slapd_system_strerror(oserr)); return -1; } if (setuid (pw->pw_uid) != 0) { int oserr = errno; LDAPDebug (LDAP_DEBUG_ANY, "setuid(%li) != 0, error %d (%s)\n", (long)pw->pw_uid, oserr, slapd_system_strerror(oserr)); return -1; } } } #endif return 0; } /* set good defaults for front-end config in referral mode */ static void referral_set_defaults(void) { #if !defined(_WIN32) && !defined(AIX) char errorbuf[SLAPI_DSE_RETURNTEXT_SIZE]; config_set_maxdescriptors( CONFIG_MAXDESCRIPTORS_ATTRIBUTE, "1024", errorbuf, 1); #endif } static int name2exemode( char *progname, char *s, int exit_if_unknown ) { int exemode; if ( strcmp( s, "db2ldif" ) == 0 ) { exemode = SLAPD_EXEMODE_DB2LDIF; } else if ( strcmp( s, "ldif2db" ) == 0 ) { exemode = SLAPD_EXEMODE_LDIF2DB; } else if ( strcmp( s, "archive2db" ) == 0 ) { exemode = SLAPD_EXEMODE_ARCHIVE2DB; } else if ( strcmp( s, "db2archive" ) == 0 ) { exemode = SLAPD_EXEMODE_DB2ARCHIVE; } else if ( strcmp( s, "server" ) == 0 ) { exemode = SLAPD_EXEMODE_SLAPD; } else if ( strcmp( s, "dbtest" ) == 0 ) { exemode = SLAPD_EXEMODE_DBTEST; } else if ( strcmp( s, "db2index" ) == 0 ) { exemode = SLAPD_EXEMODE_DB2INDEX; } else if ( strcmp( s, "refer" ) == 0 ) { exemode = SLAPD_EXEMODE_REFERRAL; } else if ( strcmp( s, "suffix2instance" ) == 0 ) { exemode = SLAPD_EXEMODE_SUFFIX2INSTANCE; } else if ( strcmp( s, "upgradedb" ) == 0 ) { exemode = SLAPD_EXEMODE_UPGRADEDB; } else if ( exit_if_unknown ) { fprintf( stderr, "usage: %s -D configdir " "[ldif2db | db2ldif | archive2db " "| db2archive | db2index | refer | suffix2instance" " | upgradedb] " "[options]\n", progname ); exit( 1 ); } else { exemode = SLAPD_EXEMODE_UNKNOWN; } return( exemode ); } static void usage( char *name, char *extraname ) { char *usagestr = NULL; char *extraspace; if ( extraname == NULL ) { extraspace = extraname = ""; } else { extraspace = " "; } switch( slapd_exemode ) { case SLAPD_EXEMODE_DB2LDIF: usagestr = "usage: %s %s%s-D configdir [-n backend-instance-name] [-d debuglevel] " "[-N] [-a outputfile] [-r] [-C] [{-s includesuffix}*] " "[{-x excludesuffix}*] [-u] [-U] [-m] [-M] [-E]\n" "Note: either \"-n backend_instance_name\" or \"-s includesuffix\" is required.\n"; break; case SLAPD_EXEMODE_LDIF2DB: usagestr = "usage: %s %s%s-D configdir [-d debuglevel] " "[-n backend_instance_name] [-O] [-g uniqueid_type] [--namespaceid uniqueID]" "[{-s includesuffix}*] [{-x excludesuffix}*] [-E] {-i ldif-file}*\n" "Note: either \"-n backend_instance_name\" or \"-s includesuffix\" is required.\n"; break; case SLAPD_EXEMODE_DB2ARCHIVE: usagestr = "usage: %s %s%s-D configdir [-d debuglevel] -a archivedir\n"; break; case SLAPD_EXEMODE_ARCHIVE2DB: usagestr = "usage: %s %s%s-D configdir [-d debuglevel] -a archivedir\n"; break; case SLAPD_EXEMODE_DB2INDEX: usagestr = "usage: %s %s%s-D configdir -n backend-instance-name " "[-d debuglevel] {-t attributetype}* {-T VLV Search Name}*\n"; /* JCM should say 'Address Book' or something instead of VLV */ break; case SLAPD_EXEMODE_REFERRAL: usagestr = "usage: %s %s%s-D configdir -r referral-url [-p port]\n"; break; case SLAPD_EXEMODE_DBTEST: usagestr = "usage: %s %s%s-D configdir -n backend-instance-name " "[-d debuglevel] [-S] [-v]\n"; break; case SLAPD_EXEMODE_SUFFIX2INSTANCE: usagestr = "usage: %s %s%s -D configdir {-s suffix}*\n"; break; case SLAPD_EXEMODE_UPGRADEDB: usagestr = "usage: %s %s%s-D configdir [-d debuglevel] [-f] -a archivedir\n"; break; default: /* SLAPD_EXEMODE_SLAPD */ usagestr = "usage: %s %s%s-D configdir [-d debuglevel] " "[-i pidlogfile] [-v] [-V]\n"; } fprintf( stderr, usagestr, name, extraname, extraspace ); } /* * These nasty globals are the settings collected from the * command line by the process_command_line function. The * various slapd_exemode functions read these to drive their * execution. */ static char *extraname; static char *myname; static int n_port = 0; static int s_port = 0; static char **ldif_file = NULL; static int ldif_files = 0; static int ldif_backend = 0; static char *cmd_line_instance_name = NULL; static char **cmd_line_instance_names = NULL; static int skip_db_protect_check = 0; static char **db2ldif_include = NULL; static char **db2ldif_exclude = NULL; static int ldif2db_removedupvals = 1; static int ldif2db_noattrindexes = 0; static char **db2index_attrs = NULL; static int ldif_printkey = EXPORT_PRINTKEY|EXPORT_APPENDMODE; static char *archive_name = NULL; static int db2ldif_dump_replica = 0; static int db2ldif_dump_uniqueid = 1; static int ldif2db_generate_uniqueid = SLAPI_UNIQUEID_GENERATE_TIME_BASED; static int ldif2db_load_state= 1; static char *ldif2db_namespaceid = NULL; int importexport_encrypt = 0; static int upgradedb_force = 0; /* taken from idsktune */ #if defined(__sun) static void ids_get_platform_solaris(char *buf) { struct utsname u; char sbuf[128]; FILE *fp; #if defined(sparc) || defined(__sparc) int is_u = 0; sbuf[0] = '\0'; sysinfo(SI_MACHINE,sbuf,128); if (strcmp(sbuf,"sun4u") == 0) { is_u = 1; } sbuf[0] = '\0'; sysinfo(SI_PLATFORM,sbuf,128); PR_snprintf(buf,sizeof(buf),"%ssparc%s-%s-solaris", is_u ? "u" : "", sizeof(long) == 4 ? "" : "v9", sbuf); #else #if defined(i386) || defined(__i386) sprintf(buf,"i386-unknown-solaris"); #else sprintf(buf,"unknown-unknown-solaris"); #endif /* not i386 */ #endif /* not sparc */ uname(&u); if (isascii(u.release[0]) && isdigit(u.release[0])) strcat(buf,u.release); fp = fopen("/etc/release","r"); if (fp != NULL) { char *rp; sbuf[0] = '\0'; fgets(sbuf,128,fp); fclose(fp); rp = strstr(sbuf,"Solaris"); if (rp) { rp += 8; while(*rp != 's' && *rp != '\0') rp++; if (*rp == 's') { char *rp2; rp2 = strchr(rp,' '); if (rp2) *rp2 = '\0'; strcat(buf,"_"); strcat(buf,rp); } } } } #endif static void slapd_print_version(int verbose) { #if defined(__sun) char buf[8192]; #endif char *versionstring = config_get_versionstring(); char *buildnum = config_get_buildnum(); printf( SLAPD_VENDOR_NAME "\n%s B%s\n", versionstring, buildnum); /* not here in Win32 */ #if !defined(_WIN32) if (strcmp(buildnum,BUILD_NUM) != 0) { printf( "ns-slapd: B%s\n", BUILD_NUM); } #endif slapi_ch_free( (void **)&versionstring); slapi_ch_free( (void **)&buildnum); if (verbose == 0) return; #if defined(__sun) ids_get_platform_solaris(buf); printf("System: %s\n",buf); #endif /* this won't print much with the -v flag as the dse.ldif file * hasn't be read yet. */ plugin_print_versions(); } #if defined( _WIN32 ) /* On Windows, we signal the SCM when we're still starting up */ static int write_start_pid_file() { if( SlapdIsAService() ) { /* Initialization complete and successful. Set service to running */ LDAPServerStatus.dwCurrentState = SERVICE_START_PENDING; LDAPServerStatus.dwCheckPoint = 1; LDAPServerStatus.dwWaitHint = 1000; if (!SetServiceStatus(hLDAPServerServiceStatus, &LDAPServerStatus)) { ReportSlapdEvent(EVENTLOG_INFORMATION_TYPE, MSG_SERVER_START_FAILED, 1, "Could not set Service status."); exit(1); } } ReportSlapdEvent(EVENTLOG_INFORMATION_TYPE, MSG_SERVER_STARTED, 0, NULL ); return 0; } #else /* WIN32 */ /* On UNIX, we create a file with our PID in it */ static int write_start_pid_file() { FILE *fp = NULL; /* * The following section of code is closely coupled with the * admin programs. Please do not make changes here without * consulting the start/stop code for the admin code. */ if ( (fp = fopen( start_pid_file, "w" )) != NULL ) { fprintf( fp, "%d\n", getpid() ); fclose( fp ); return 0; } else { return -1; } } #endif /* WIN32 */ int main( int argc, char **argv) { int return_value = 0; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); daemon_ports_t ports_info = {0}; Slapi_Backend *be = NULL; int init_ssl; #ifndef __LP64__ #if defined(__hpux) && !defined(__ia64) /* for static constructors */ _main(); #endif #endif /* * Initialize NSPR very early. NSPR supports implicit initialization, * but it is not bulletproof -- so it is better to be explicit. */ PR_Init( PR_USER_THREAD, PR_PRIORITY_NORMAL, 0 ); FrontendConfig_init(); #ifdef _WIN32 /* Break into the debugger if DEBUG_BREAK is set in the environment to "slapd" */ { char *s = getenv( "DEBUG_BREAK" ); if ( (s != NULL) && !stricmp(s, "slapd") ) DebugBreak(); } /* do module debug level init for slapd, and libslapd */ module_ldap_debug = &slapd_ldap_debug; libldap_init_debug_level(&slapd_ldap_debug); dostounixpath( argv[0] ); _strlwr( argv[0] ); #else /* _WIN32 */ /* Pause for the debugger if DEBUG_SLEEP is set in the environment */ { char *s = getenv( "DEBUG_SLEEP" ); if ( (s != NULL) && isdigit(*s) ) { int secs = atoi(s); printf("slapd pid is %d\n", getpid()); sleep(secs); } } /* used to set configfile to the default config file name here */ #endif /* _WIN32 */ if ( (myname = strrchr( argv[0], '/' )) == NULL ) { myname = slapi_ch_strdup( argv[0] ); } else { myname = slapi_ch_strdup( myname + 1 ); } #if defined( XP_WIN32 ) /* Strip ".exe" if it's there */ { char *pdot; if ( (pdot = strrchr( myname, '.' )) != NULL ) { *pdot = '\0'; } } #endif process_command_line(argc,argv,myname,&extraname); if (NULL == slapdFrontendConfig->configdir) { usage( myname, extraname ); exit( 1 ); } /* display debugging level if it is anything other than the default */ if ( 0 != ( slapd_ldap_debug & ~LDAP_DEBUG_ANY )) { slapd_debug_level_log( slapd_ldap_debug ); } #ifndef LDAP_DONT_USE_SMARTHEAP MemRegisterTask(); #endif slapd_init(); g_log_init(1); vattr_init(); if (slapd_exemode == SLAPD_EXEMODE_REFERRAL) { slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); /* make up the config stuff */ referral_set_defaults(); /* * Process the config files. */ if (0 == slapd_bootstrap_config(slapdFrontendConfig->configdir)) { slapi_log_error(SLAPI_LOG_FATAL, "startup", "The configuration files in directory %s could not be read or were not found. Please refer to the error log or output for more information.\n", slapdFrontendConfig->configdir); exit(1); } n_port = config_get_port(); s_port = config_get_secureport(); register_objects(); } else { slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); /* The 2 calls below have been moved to this place to make sure that * they are called before setup_internal_backends to avoid bug 524439 */ /* * The 2 calls below where being sometimes called AFTER * ldapi_register_extended_op (such fact was being stated and * reproducible for some optimized installations at startup (bug * 524439)... Such bad call was happening in the context of * setup_internal_backends -> dse_read_file -> load_plugin_entry -> * plugin_setup -> replication_multimaster_plugin_init -> * slapi_register_plugin -> plugin_setup -> * multimaster_start_extop_init -> * slapi_pblock_set -> * ldapi_register_extended_op... Unfortunately, the server * design is such that it is assumed that ldapi_init_extended_ops is * always called first. * THE FIX: Move the two calls below before a call to * setup_internal_backends (down in this same function) */ ldapi_init_extended_ops(); /* * Initialize the default backend. This should be done before we * process the config. files */ defbackend_init(); /* * Register the extensible objects with the factory. */ register_objects(); /* * Register the controls that we support. */ init_controls(); /* * Process the config files. */ if (0 == slapd_bootstrap_config(slapdFrontendConfig->configdir)) { slapi_log_error(SLAPI_LOG_FATAL, "startup", "The configuration files in directory %s could not be read or were not found. Please refer to the error log or output for more information.\n", slapdFrontendConfig->configdir); exit(1); } /* We need to init sasl after we load the bootstrap config since * the config may be setting the sasl plugin path. */ init_saslmechanisms(); /* -sduloutre: must be done before any internal search */ /* do it before splitting off to other modes too -robey */ /* -richm: must be done before reading config files */ if (0 != (return_value = compute_init())) { LDAPDebug(LDAP_DEBUG_ANY, "Initialization Failed 0 %d\n",return_value,0,0); exit (1); } entry_computed_attr_init(); if (0 == setup_internal_backends(slapdFrontendConfig->configdir)) { slapi_log_error(SLAPI_LOG_FATAL, "startup", "The configuration files in directory %s could not be read or were not found. Please refer to the error log or output for more information.\n", slapdFrontendConfig->configdir); exit(1); } n_port = config_get_port(); s_port = config_get_secureport(); } raise_process_limits(); /* should be done ASAP once config file read */ #ifdef PUMPKIN_HOUR if ( time( NULL ) > (PUMPKIN_HOUR - 10) ) { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: ** This beta software has expired **\n", 0, 0, 0 ); exit( 1 ); } #endif /* Set entry points in libslapd */ set_entry_points(); #if defined( XP_WIN32 ) if (slapd_exemode == SLAPD_EXEMODE_SLAPD) { /* Register with the NT EventLog */ hSlapdEventSource = RegisterEventSource(NULL, pszServerName ); if( !hSlapdEventSource ) { char szMessage[256]; PR_snprintf( szMessage, sizeof(szMessage), "Directory Server %s is terminating. Failed " "to set the EventLog source.", pszServerName); MessageBox(GetDesktopWindow(), szMessage, " ", MB_ICONEXCLAMATION | MB_OK); exit( 1 ); } /* Check to ensure there isn't a copy of this server already running. */ if( MultipleInstances() ) exit( 1 ); } #endif /* * After we read the config file we should make * sure that everything we needed to read in has * been read in and we'll start whatever threads, * etc the backends need to start */ /* Important: up 'till here we could be running as root (on unix). * we believe that we've not created any files before here, otherwise * they'd be owned by root, which is bad. We're about to change identity * to some non-root user, but before we do, we call the daemon code * to let it open the listen sockets. If these sockets are low-numbered, * we need to be root in order to open them. */ if ((slapd_exemode == SLAPD_EXEMODE_SLAPD) || (slapd_exemode == SLAPD_EXEMODE_REFERRAL)) { ports_info.n_port = (unsigned short)n_port; if ( slapd_listenhost2addr( config_get_listenhost(), &ports_info.n_listenaddr ) != 0 ) { return(1); } ports_info.s_port = (unsigned short)s_port; if ( slapd_listenhost2addr( config_get_securelistenhost(), &ports_info.s_listenaddr ) != 0 ) { return(1); } return_value = daemon_pre_setuid_init(&ports_info); if (0 != return_value) { LDAPDebug( LDAP_DEBUG_ANY, "Failed to init daemon\n", 0, 0, 0 ); exit(1); } } /* Now, sockets are open, so we can safely change identity now */ #ifndef _WIN32 return_value = main_setuid(slapdFrontendConfig->localuser); if (0 != return_value) { LDAPDebug( LDAP_DEBUG_ANY, "Failed to change user and group identity to that of %s\n", slapdFrontendConfig->localuser, 0, 0 ); exit(1); } #endif /* * Initialise NSS once for the whole slapd process, whether SSL * is enabled or not. We use NSS for random number generation and * other things even if we are not going to accept SSL connections. * We also need NSS for attribute encryption/decryption on import and export. */ init_ssl = ( (slapd_exemode == SLAPD_EXEMODE_SLAPD) || importexport_encrypt) && config_get_security() && (0 != s_port) && (s_port <= LDAP_PORT_MAX); /* As of DS 6.1, always do a full initialization so that other * modules can assume NSS is available */ if ( slapd_nss_init((slapd_exemode == SLAPD_EXEMODE_SLAPD), (slapd_exemode != SLAPD_EXEMODE_REFERRAL) /* have config? */ )) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: NSS Initialization Failed.\n", 0, 0, 0); exit (1); } if (slapd_exemode == SLAPD_EXEMODE_SLAPD) { client_auth_init(); } if ( init_ssl && ( 0 != slapd_ssl_init())) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: SSL Initialization Failed.\n", 0, 0, 0 ); exit( 1 ); } if ((slapd_exemode == SLAPD_EXEMODE_SLAPD) || (slapd_exemode == SLAPD_EXEMODE_REFERRAL)) { if ( init_ssl && ( 0 != slapd_ssl_init2(&ports_info.s_socket, 0) ) ) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: SSL Initialization phase 2 Failed.\n", 0, 0, 0 ); exit( 1 ); } } /* * if we were called upon to do special database stuff, do it and be * done. */ switch ( slapd_exemode ) { case SLAPD_EXEMODE_LDIF2DB: return slapd_exemode_ldif2db(); case SLAPD_EXEMODE_DB2LDIF: return slapd_exemode_db2ldif(argc,argv); case SLAPD_EXEMODE_DB2INDEX: return slapd_exemode_db2index(); case SLAPD_EXEMODE_ARCHIVE2DB: return slapd_exemode_archive2db(); case SLAPD_EXEMODE_DB2ARCHIVE: return slapd_exemode_db2archive(); case SLAPD_EXEMODE_DBTEST: return slapd_exemode_dbtest(); case SLAPD_EXEMODE_REFERRAL: /* check that all the necessary info was given, then go on */ if (! config_check_referral_mode()) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: No referral URL supplied\n", 0, 0, 0); usage( myname, extraname ); exit(1); } break; case SLAPD_EXEMODE_SUFFIX2INSTANCE: return slapd_exemode_suffix2instance(); case SLAPD_EXEMODE_UPGRADEDB: return slapd_exemode_upgradedb(); case SLAPD_EXEMODE_PRINTVERSION: slapd_print_version(1); exit(1); } /* * Detach ourselves from the terminal (unless running in debug mode). * We must detach before we start any threads since detach forks() on * UNIX. * Have to detach after ssl_init - the user may be prompted for the PIN * on the terminal, so it must be open. */ detach(); /* * Now write our PID to the startup PID file. * This is used by the start up script to determine our PID quickly * after we fork, without needing to wait for the 'real' pid file to be * written. That could take minutes. And the start script will wait * that long looking for it. With this new 'early pid' file, it can avoid * doing that, by detecting the pid and watching for the process exiting. * This removes the blank stares all round from start-slapd when the server * fails to start for some reason */ write_start_pid_file(); /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if ((slapd_exemode != SLAPD_EXEMODE_REFERRAL) && ( add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1 )) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other slapd processes\n", 0, 0, 0 ); exit(1); } /* * Now it is safe to log our first startup message. If we were to * log anything earlier than now it would appear on the admin startup * screen twice because before we detach everything is sent to both * stderr and our error log. Yuck. */ if (1) { char *versionstring = config_get_versionstring(); char *buildnum = config_get_buildnum(); LDAPDebug( LDAP_DEBUG_ANY, "%s B%s starting up\n", versionstring, buildnum, 0 ); slapi_ch_free((void **)&buildnum); slapi_ch_free((void **)&versionstring); } /* -sduloutre: compute_init() and entry_computed_attr_init() moved up */ if (slapd_exemode != SLAPD_EXEMODE_REFERRAL) { int rc; Slapi_DN *sdn; fedse_create_startOK(DSE_FILENAME, DSE_STARTOKFILE, slapdFrontendConfig->configdir); eq_init(); /* must be done before plugins started */ snmp_collator_start(); ps_init_psearch_system(); /* must come before plugin_startall() */ /* Initailize the mapping tree */ if (mapping_tree_init()) { LDAPDebug( LDAP_DEBUG_ANY, "Failed to init mapping tree\n", 0, 0, 0 ); exit(1); } /* initialize UniqueID generator - must be done once backends are started and event queue is initialized but before plugins are started */ sdn = slapi_sdn_new_dn_byval ("cn=uniqueid generator,cn=config"); rc = uniqueIDGenInit (NULL, sdn, slapd_exemode == SLAPD_EXEMODE_SLAPD); slapi_sdn_free (&sdn); if (rc != UID_SUCCESS) { LDAPDebug( LDAP_DEBUG_ANY, "Fatal Error---Failed to initialize uniqueid generator; error = %d. " "Exiting now.\n", rc, 0, 0 ); exit( 1 ); } /* --ugaston: register the start-tls plugin */ #ifndef _WIN32 if ( slapd_security_library_is_initialized() != 0 ) { start_tls_register_plugin(); LDAPDebug( LDAP_DEBUG_PLUGIN, "Start TLS plugin registered.\n", 0, 0, 0 ); } #endif passwd_modify_register_plugin(); LDAPDebug( LDAP_DEBUG_PLUGIN, "Password Modify plugin registered.\n", 0, 0, 0 ); plugin_startall(argc, argv, 1 /* Start Backends */, 1 /* Start Globals */); if (housekeeping_start((time_t)0, NULL) == NULL) { exit (1); } eq_start(); /* must be done after plugins started */ #ifdef HPUX10 /* HPUX linker voodoo */ if (collation_init == NULL) { exit (1); } #endif /* HPUX */ normalize_oc(); if (n_port) { } else if ( config_get_security()) { } else { #ifdef _WIN32 if( SlapdIsAService() ) { LDAPServerStatus.dwCurrentState = SERVICE_STOPPED; LDAPServerStatus.dwCheckPoint = 0; LDAPServerStatus.dwWaitHint = 0; LDAPServerStatus.dwWin32ExitCode = 1; LDAPServerStatus.dwServiceSpecificExitCode = 1; SetServiceStatus(hLDAPServerServiceStatus, &LDAPServerStatus); /* Log this event */ ReportSlapdEvent(EVENTLOG_INFORMATION_TYPE, MSG_SERVER_START_FAILED, 1, "Check server port specification"); } else { char szMessage[256]; PR_snprintf( szMessage, sizeof(szMessage), "The Directory Server %s is terminating due to an error. Check server port specification", pszServerName); MessageBox(GetDesktopWindow(), szMessage, " ", MB_ICONEXCLAMATION | MB_OK); } #endif exit(1); } } { Slapi_PBlock pb; memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = be; } if (slapd_exemode != SLAPD_EXEMODE_REFERRAL) { /* else do this after seteuid() */ lite_entries_init(); /* setup cn=tasks tree */ task_init(); /* pw_init() needs to be here since it uses aci function calls. */ pw_init(); /* Initialize the sasl mapping code */ if (sasl_map_init()) { LDAPDebug( LDAP_DEBUG_ANY, "Failed to initialize sasl mapping code\n", 0, 0, 0 ); } } /* * search_register_reslimits() and daemon_register_reslimits() can * be called any time before we start accepting client connections. * We call these even when running in referral mode because they * do little harm and registering at least one resource limit forces * the reslimit subsystem to initialize itself... which prevents * strange error messages from being logged to the error log for * the first LDAP connection. */ if ( search_register_reslimits() != SLAPI_RESLIMIT_STATUS_SUCCESS || daemon_register_reslimits() != SLAPI_RESLIMIT_STATUS_SUCCESS ) { exit( 1 ); } { time( &starttime ); slapd_daemon(&ports_info); } LDAPDebug( LDAP_DEBUG_ANY, "slapd stopped.\n", 0, 0, 0 ); reslimit_cleanup(); compute_terminate(); vattr_cleanup(); sasl_map_done(); PR_Cleanup(); #ifdef _WIN32 /* Clean up the mutex used to interlock processes, before we exit */ remove_slapd_process(); #endif #if ( defined( hpux ) || defined( irix ) || defined( aix ) || defined( OSF1 )) exit( 0 ); #else return 0; #endif } #if ( defined( hpux ) || defined( irix )) void * signal2sigaction( int s, void *a ) { struct sigaction act; memset(&act, 0, sizeof(struct sigaction)); act.sa_handler = (VFP)a; act.sa_flags = 0; (void)sigemptyset( &act.sa_mask ); (void)sigaddset( &act.sa_mask, s ); (void)sigaction( s, &act, NULL ); } #endif /* hpux || irix */ static void register_objects() { get_operation_object_type(); daemon_register_connection(); get_entry_object_type(); mapping_tree_get_extension_type (); } static void process_command_line(int argc, char **argv, char *myname, char **extraname) { int i; char errorbuf[SLAPI_DSE_RETURNTEXT_SIZE]; char *opts; static struct opt_ext *long_opts; int longopt_index=0; /* * Refer to the file getopt_ext.h for an overview of how to use the * long option names * */ /* * when a new option letter is used, please move it from the "available" * list to the "used" list. * */ /* * single-letter options already in use: * * a C c D E d f G g i * L l N m n O o P p r S s T t * u v V w x Z z * * 1 * */ /* * single-letter options still available: * * A B b e F H h I J j * K k M Q q R * W X Y y * * 2 3 4 5 6 7 8 9 0 * */ char *opts_dbtest = "vd:n:SD:"; struct opt_ext long_options_dbtest[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"backend",ArgRequired,'n'}, {"allowMultipleProcesses",ArgNone,'S'}, {"configDir",ArgRequired,'D'}, {0,0,0}}; char *opts_db2ldif = "vd:D:ENa:rs:x:CSut:n:UmMo1"; struct opt_ext long_options_db2ldif[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"dontPrintKey",ArgNone,'n'}, {"archive",ArgRequired,'a'}, {"replica",ArgNone,'r'}, {"include",ArgRequired,'s'}, {"exclude",ArgRequired,'x'}, /*{"whatshouldwecallthis",ArgNone,'C'},*/ {"allowMultipleProcesses",ArgNone,'S'}, {"noUniqueIds",ArgNone,'u'}, {"configDir",ArgRequired,'D'}, {"encrypt",ArgOptional,'E'}, {"nowrap",ArgNone,'U'}, {"minimalEncode",ArgNone,'m'}, {"oneOutputFile",ArgNone,'o'}, {"multipleOutputFile",ArgNone,'M'}, {"noVersionNum",ArgNone,'1'}, {0,0,0}}; char *opts_ldif2db = "vd:i:g:G:n:s:x:NOCc:St:D:E"; struct opt_ext long_options_ldif2db[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"ldiffile",ArgRequired,'i'}, {"generateUniqueId",ArgOptional,'g'}, {"backend",ArgRequired,'n'}, {"include",ArgRequired,'s'}, {"exclude",ArgRequired,'x'}, {"noindex",ArgNone,'O'}, /*{"whatshouldwecallthis",ArgNone,'C'},*/ /*{"whatshouldwecallthis",ArgRequired,'c'},*/ {"allowMultipleProcesses",ArgNone,'S'}, {"namespaceid", ArgRequired, 'G'}, {"nostate",ArgNone,'Z'}, {"configDir",ArgRequired,'D'}, {"encrypt",ArgOptional,'E'}, {0,0,0}}; char *opts_archive2db = "vd:i:a:n:SD:"; struct opt_ext long_options_archive2db[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"pidfile",ArgRequired,'i'}, {"archive",ArgRequired,'a'}, {"backEndInstName",ArgRequired,'n'}, {"allowMultipleProcesses",ArgNone,'S'}, {"configDir",ArgRequired,'D'}, {0,0,0}}; char *opts_db2archive = "vd:i:a:SD:"; struct opt_ext long_options_db2archive[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"pidfile",ArgRequired,'i'}, {"archive",ArgRequired,'a'}, {"allowMultipleProcesses",ArgNone,'S'}, {"configDir",ArgRequired,'D'}, {0,0,0}}; char *opts_db2index = "vd:a:t:T:SD:n:s:x:"; struct opt_ext long_options_db2index[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"backend",ArgRequired,'n'}, {"archive",ArgRequired,'a'}, {"indexAttribute",ArgRequired,'t'}, {"vlvIndex",ArgRequired,'T'}, {"allowMultipleProcesses",ArgNone,'S'}, {"configDir",ArgRequired,'D'}, {"include",ArgRequired,'s'}, {"exclude",ArgRequired,'x'}, {0,0,0}}; char *opts_upgradedb = "vfd:a:D:"; struct opt_ext long_options_upgradedb[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"force",ArgNone,'f'}, {"archive",ArgRequired,'a'}, {"configDir",ArgRequired,'D'}, {0,0,0}}; char *opts_referral = "vd:p:r:SD:"; struct opt_ext long_options_referral[] = { {"version",ArgNone,'v'}, {"debug",ArgRequired,'d'}, {"port",ArgRequired,'p'}, {"referralMode",ArgRequired,'r'}, {"allowMultipleProcesses",ArgNone,'S'}, {"configDir",ArgRequired,'D'}, {0,0,0}}; char *opts_suffix2instance = "s:D:"; struct opt_ext long_options_suffix2instance[] = { {"suffix",ArgRequired,'s'}, {"instanceDir",ArgRequired,'D'}, {0,0,0}}; char *opts_slapd = "vVd:i:SD:w:"; struct opt_ext long_options_slapd[] = { {"version",ArgNone,'v'}, {"versionFull",ArgNone,'V'}, {"debug",ArgRequired,'d'}, {"pidfile",ArgRequired,'i'}, {"allowMultipleProcesses",ArgNone,'S'}, {"configDir",ArgRequired,'D'}, {"startpidfile",ArgRequired,'w'}, {0,0,0}}; /* * determine which of serveral modes we are executing in. */ *extraname = NULL; if (( slapd_exemode = name2exemode( myname, myname, 0 )) == SLAPD_EXEMODE_UNKNOWN ) { if ( argv[1] != NULL && argv[1][0] != '-' ) { slapd_exemode = name2exemode( myname, argv[1], 1 ); *extraname = argv[1]; optind_ext = 2; /* make getopt() skip argv[1] */ optind = 2; } } if ( slapd_exemode == SLAPD_EXEMODE_UNKNOWN ) { slapd_exemode = SLAPD_EXEMODE_SLAPD; /* default */ } /* * richm: If running in regular slapd server mode, allow the front * end dse files (dse.ldif and ldbm.ldif) to be written in case of * additions or modifications. In all other modes, these files * should only be read and never written. */ if (slapd_exemode == SLAPD_EXEMODE_SLAPD || slapd_exemode == SLAPD_EXEMODE_ARCHIVE2DB || /* bak2db adjusts config */ slapd_exemode == SLAPD_EXEMODE_UPGRADEDB) /* update idl-switch */ dse_unset_dont_ever_write_dse_files(); /* maintain compatibility with pre-5.x options */ switch( slapd_exemode ) { case SLAPD_EXEMODE_DBTEST: opts = opts_dbtest; long_opts = long_options_dbtest; break; case SLAPD_EXEMODE_DB2LDIF: opts = opts_db2ldif; long_opts = long_options_db2ldif; break; case SLAPD_EXEMODE_LDIF2DB: opts = opts_ldif2db; long_opts = long_options_ldif2db; break; case SLAPD_EXEMODE_ARCHIVE2DB: opts = opts_archive2db; long_opts = long_options_archive2db; break; case SLAPD_EXEMODE_DB2ARCHIVE: init_cmd_shutdown_detect(); opts = opts_db2archive; long_opts = long_options_db2archive; break; case SLAPD_EXEMODE_DB2INDEX: opts = opts_db2index; long_opts = long_options_db2index; break; case SLAPD_EXEMODE_REFERRAL: opts = opts_referral; long_opts = long_options_referral; break; case SLAPD_EXEMODE_SUFFIX2INSTANCE: opts = opts_suffix2instance; long_opts = long_options_suffix2instance; break; case SLAPD_EXEMODE_UPGRADEDB: opts = opts_upgradedb; long_opts = long_options_upgradedb; break; default: /* SLAPD_EXEMODE_SLAPD */ opts = opts_slapd; long_opts = long_options_slapd; } while ( (i = getopt_ext( argc, argv, opts, long_opts, &longopt_index)) != EOF ) { char *configdir = 0; switch ( i ) { #ifdef LDAP_DEBUG case 'd': /* turn on debugging */ if ( optarg_ext[0] == '?' || 0 == strcasecmp( optarg_ext, "help" )) { slapd_debug_level_usage(); exit( 1 ); } else { should_detach = 0; slapd_ldap_debug = slapd_debug_level_string2level( optarg_ext ); if ( slapd_ldap_debug < 0 ) { slapd_debug_level_usage(); exit( 1 ); } slapd_ldap_debug |= LDAP_DEBUG_ANY; } break; #else case 'd': /* turn on debugging */ fprintf( stderr, "must compile with LDAP_DEBUG for debugging\n" ); break; #endif case 'D': /* config dir */ configdir = rel2abspath( optarg_ext ); #if defined( XP_WIN32 ) pszServerName = slapi_ch_malloc( MAX_SERVICE_NAME ); if( !SlapdGetServerNameFromCmdline(pszServerName, configdir, 1) ) { MessageBox(GetDesktopWindow(), "Failed to get the Directory" " Server name from the command-line argument.", " ", MB_ICONEXCLAMATION | MB_OK); exit( 1 ); } #endif if ( config_set_configdir( "configdir (-D)", configdir, errorbuf, 1) != LDAP_SUCCESS ) { fprintf( stderr, "%s: aborting now\n", errorbuf ); usage( myname, *extraname ); exit( 1 ); } slapi_ch_free((void **)&configdir); break; case 'p': /* port on which to listen (referral mode only) */ if ( config_set_port ( "portnumber (-p)", optarg_ext, errorbuf, CONFIG_APPLY ) != LDAP_SUCCESS ) { fprintf( stderr, "%s: aborting now\n", errorbuf ); usage( myname, *extraname ); exit( 1 ); } break; case 'i': /* set pid log file or ldif2db LDIF file */ if ( slapd_exemode == SLAPD_EXEMODE_LDIF2DB ) { char *p; /* if LDIF comes through standard input, skip path checking */ if ( optarg_ext[0] != '-' || strlen(optarg_ext) != 1) { #if defined( XP_WIN32 ) if ( optarg_ext[0] != '/' && optarg_ext[0] != '\\' && (!isalpha( optarg_ext[0] ) || (optarg_ext[1] != ':')) ) { fprintf( stderr, "%s file could not be opened: absolute path " " required.\n", optarg_ext ); break; } #else if ( optarg_ext[ 0 ] != '/' ) { fprintf( stderr, "%s file could not be opened: absolute path " " required.\n", optarg_ext ); break; } #endif } p = (char *) slapi_ch_malloc(strlen(optarg_ext) + 1); strcpy(p, optarg_ext); charray_add(&ldif_file, p); ldif_files++; } else { pid_file = rel2abspath( optarg_ext ); } break; case 'w': /* set startup pid file */ start_pid_file = rel2abspath( optarg_ext ); break; case 'n': /* which backend to do ldif2db/bak2db for */ if (slapd_exemode == SLAPD_EXEMODE_LDIF2DB || slapd_exemode == SLAPD_EXEMODE_DBTEST || slapd_exemode == SLAPD_EXEMODE_DB2INDEX || slapd_exemode == SLAPD_EXEMODE_ARCHIVE2DB) { /* The -n argument will give the name of a backend instance. */ cmd_line_instance_name = optarg_ext; } else if (slapd_exemode == SLAPD_EXEMODE_DB2LDIF) { char *s = slapi_ch_strdup(optarg_ext); charray_add(&cmd_line_instance_names, s); } else { ldif_backend = atoi( optarg_ext ); } break; case 's': /* which suffix to include in import/export */ { char *s= slapi_dn_normalize ( slapi_ch_strdup(optarg_ext) ); charray_add(&db2ldif_include,s); } break; case 'x': /* which suffix to exclude in import/export */ { char *s= slapi_dn_normalize ( slapi_ch_strdup(optarg_ext) ); charray_add(&db2ldif_exclude,s); } break; case 'r': /* db2ldif for replication */ if (slapd_exemode == SLAPD_EXEMODE_REFERRAL) { if (config_set_referral_mode( "referral (-r)", optarg_ext, errorbuf, CONFIG_APPLY) != LDAP_SUCCESS) { fprintf(stderr, "%s: aborting now\n", errorbuf); usage(myname, *extraname); exit(1); } break; } if (slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } db2ldif_dump_replica = 1; break; case 'N': /* do not do ldif2db duplicate value check */ if ( slapd_exemode != SLAPD_EXEMODE_LDIF2DB && slapd_exemode != SLAPD_EXEMODE_DB2LDIF) { usage( myname, *extraname ); exit( 1 ); } /* * -N flag is obsolete, but we silently accept it * so we don't break customer's scripts. */ /* The -N flag now does what the -n flag used to do for db2ldif. * This is so -n cane be used for the instance name just like * with ldif2db. */ if ( slapd_exemode == SLAPD_EXEMODE_DB2LDIF ) { ldif_printkey &= ~EXPORT_PRINTKEY; } break; case 'U': /* db2ldif only */ if ( slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } /* * don't fold (wrap) long lines (default is to fold), * as of ldapsearch -T */ ldif_printkey |= EXPORT_NOWRAP; break; case 'm': /* db2ldif only */ if ( slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } /* minimal base64 encoding */ ldif_printkey |= EXPORT_MINIMAL_ENCODING; break; case 'M': /* db2ldif only */ if ( slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } /* * output ldif is stored in several file called intance_filename. * by default, all instances are stored in the single filename. */ ldif_printkey &= ~EXPORT_APPENDMODE; break; case 'o': /* db2ldif only */ if ( slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } /* * output ldif is stored in one file. * by default, each instance is stored in instance_filename. */ ldif_printkey |= EXPORT_APPENDMODE; break; case 'C': if (slapd_exemode == SLAPD_EXEMODE_LDIF2DB) { /* used to mean "Cool new import" (which is now * the default) -- ignore */ break; } if (slapd_exemode == SLAPD_EXEMODE_DB2LDIF) { /* possibly corrupted db -- don't look at any * file except id2entry. yet another overloaded * flag. */ ldif_printkey |= EXPORT_ID2ENTRY_ONLY; break; } usage( myname, *extraname ); exit( 1 ); case 'c': /* merge chunk size for Cool new import */ if ( slapd_exemode != SLAPD_EXEMODE_LDIF2DB ) { usage( myname, *extraname ); exit( 1 ); } ldif2db_removedupvals = atoi(optarg_ext); /* We overload this flag---ok since we always check for dupes in the new code */ break; case 'O': /* only create core db, no attr indexes */ if ( slapd_exemode != SLAPD_EXEMODE_LDIF2DB ) { usage( myname, *extraname ); exit( 1 ); } ldif2db_noattrindexes = 1; break; case 't': /* attribute type to index - may be repeated */ case 'T': /* VLV Search to index - may be repeated */ if ( slapd_exemode == SLAPD_EXEMODE_DB2INDEX ) { char *p= slapi_ch_smprintf("%c%s",i,optarg_ext); charray_add( &db2index_attrs, p); break; } usage( myname, *extraname ); exit(1); case 'v': /* print version and exit */ slapd_print_version(0); exit( 1 ); break; case 'V': slapd_exemode = SLAPD_EXEMODE_PRINTVERSION; break; case 'a': /* archive pathname for db */ archive_name = optarg_ext; break; case 'Z': if (slapd_exemode == SLAPD_EXEMODE_LDIF2DB) { ldif2db_load_state= 0; break; } usage( myname, *extraname ); exit(1); case 'S': /* skip the check for slad running in conflicting modes */ skip_db_protect_check = 1; break; case 'u': /* do not dump uniqueid for db2ldif */ if ( slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } db2ldif_dump_uniqueid = 0; break; case 'g': /* generate uniqueid for ldif2db */ if ( slapd_exemode != SLAPD_EXEMODE_LDIF2DB ) { usage( myname, *extraname ); exit( 1 ); } if (optarg_ext == NULL){ printf ("ldif2db: generation type is not specified for -g; " "random generation is used\n"); ldif2db_generate_uniqueid = SLAPI_UNIQUEID_GENERATE_TIME_BASED; } else if (strcasecmp (optarg_ext, "none") == 0) ldif2db_generate_uniqueid = SLAPI_UNIQUEID_GENERATE_NONE; else if (strcasecmp (optarg_ext, "deterministic") == 0) /* name based */ ldif2db_generate_uniqueid = SLAPI_UNIQUEID_GENERATE_NAME_BASED; else /* default - time based */ ldif2db_generate_uniqueid = SLAPI_UNIQUEID_GENERATE_TIME_BASED; break; case 'G': /* namespace id for name based uniqueid generation for ldif2db */ if ( slapd_exemode != SLAPD_EXEMODE_LDIF2DB ) { usage( myname, *extraname ); exit( 1 ); } ldif2db_namespaceid = optarg_ext; break; case 'E': /* encrypt data if importing, decrypt if exporting */ if ( (slapd_exemode != SLAPD_EXEMODE_LDIF2DB) && (slapd_exemode != SLAPD_EXEMODE_DB2LDIF)) { usage( myname, *extraname ); exit( 1 ); } importexport_encrypt = 1; break; case 'f': /* upgradedb only */ if ( slapd_exemode != SLAPD_EXEMODE_UPGRADEDB ) { usage( myname, *extraname ); exit( 1 ); } upgradedb_force = SLAPI_UPGRADEDB_FORCE; break; case '1': /* db2ldif only */ if ( slapd_exemode != SLAPD_EXEMODE_DB2LDIF ) { usage( myname, *extraname ); exit( 1 ); } /* * do not output "version: 1" to the ldif file */ ldif_printkey |= EXPORT_NOVERSION; break; default: usage( myname, *extraname ); exit( 1 ); } } if ((NULL != cmd_line_instance_names) && (NULL != cmd_line_instance_names[1]) && (ldif_printkey & EXPORT_APPENDMODE)) { fprintf(stderr, "WARNING: several backends are being" " exported to a single ldif file\n"); fprintf(stderr, " use option -M to export to" " multiple ldif files\n"); } /* Any leftover arguments? */ if ( optind_last > optind ) { usage( myname, *extraname ); exit( 1 ); } return; } static int lookup_instance_name_by_suffix(char *suffix, char ***suffixes, char ***instances, int isexact) { Slapi_PBlock *pb = slapi_pblock_new(); Slapi_Entry **entries = NULL, **ep; char *query; char *backend; char *fullsuffix; int rval = -1; if (pb == NULL) goto done; if (isexact) query = slapi_ch_smprintf("(&(objectclass=nsmappingtree)(|(cn=\"%s\")(cn=%s)))", suffix, suffix); else query = slapi_ch_smprintf("(&(objectclass=nsmappingtree)(|(cn=*%s\")(cn=*%s)))", suffix, suffix); if (query == NULL) goto done; slapi_search_internal_set_pb(pb, "cn=mapping tree,cn=config", LDAP_SCOPE_SUBTREE, query, NULL, 0, NULL, NULL, (void *)plugin_get_default_component_id(), 0); slapi_search_internal_pb(pb); slapi_ch_free((void **)&query); slapi_pblock_get(pb, SLAPI_PLUGIN_INTOP_RESULT, &rval); if (rval != LDAP_SUCCESS) goto done; slapi_pblock_get(pb, SLAPI_PLUGIN_INTOP_SEARCH_ENTRIES, &entries); if ((entries == NULL) || (entries[0] == NULL)) goto done; rval = 0; for (ep = entries; *ep; ep++) { backend = slapi_entry_attr_get_charptr(*ep, "nsslapd-backend"); if (backend) { charray_add(instances, backend); if (suffixes) { fullsuffix = slapi_entry_attr_get_charptr(*ep, "cn"); charray_add(suffixes, fullsuffix); /* NULL is ok */ } } } done: slapi_free_search_results_internal(pb); slapi_pblock_destroy(pb); return rval; } int lookup_instance_name_by_suffixes(char **included, char **excluded, char ***instances) { char **incl_instances, **excl_instances; char **p; int rval = -1; incl_instances = NULL; for (p = included; p && *p; p++) { if (lookup_instance_name_by_suffix(*p, NULL, &incl_instances, 0) < 0) return rval; } excl_instances = NULL; for (p = excluded; p && *p; p++) { if (lookup_instance_name_by_suffix(*p, NULL, &excl_instances, 0) < 0) return rval; } rval = 0; charray_subtract(incl_instances, excl_instances, NULL); charray_free(excl_instances); *instances = incl_instances; return rval; } /* helper function for ldif2db & friends -- given an instance name, lookup * the plugin name in the DSE. this assumes the DSE has already been loaded. */ static struct slapdplugin *lookup_plugin_by_instance_name(const char *name) { Slapi_Entry **entries = NULL; Slapi_PBlock *pb = slapi_pblock_new(); struct slapdplugin *plugin; char *query, *dn, *cn; int ret = 0; if (pb == NULL) return NULL; query = slapi_ch_smprintf("(&(cn=%s)(objectclass=nsBackendInstance))", name); if (query == NULL) { slapi_pblock_destroy(pb); return NULL; } slapi_search_internal_set_pb(pb, "cn=plugins,cn=config", LDAP_SCOPE_SUBTREE, query, NULL, 0, NULL, NULL, (void *)plugin_get_default_component_id(), 0); slapi_search_internal_pb(pb); slapi_ch_free((void **)&query); slapi_pblock_get(pb, SLAPI_PLUGIN_INTOP_RESULT, &ret); if (ret != LDAP_SUCCESS) { slapi_free_search_results_internal(pb); slapi_pblock_destroy(pb); return NULL; } slapi_pblock_get(pb, SLAPI_PLUGIN_INTOP_SEARCH_ENTRIES, &entries); if ((entries == NULL) || (entries[0] == NULL)) { slapi_free_search_results_internal(pb); slapi_pblock_destroy(pb); return NULL; } /* okay -- have the entry for this instance, now let's chop up the dn */ /* parent dn is the plugin */ dn = slapi_dn_parent(slapi_entry_get_dn(entries[0])); /* clean up */ slapi_free_search_results_internal(pb); entries = NULL; slapi_pblock_destroy(pb); pb = NULL; /* this seems redundant . . . until we add code after this line */ /* now... look up the parent */ pb = slapi_pblock_new(); slapi_search_internal_set_pb(pb, dn, LDAP_SCOPE_BASE, "(objectclass=nsSlapdPlugin)", NULL, 0, NULL, NULL, (void *)plugin_get_default_component_id(), 0); slapi_search_internal_pb(pb); slapi_ch_free((void **)&dn); slapi_pblock_get(pb, SLAPI_PLUGIN_INTOP_RESULT, &ret); if (ret != LDAP_SUCCESS) { slapi_free_search_results_internal(pb); slapi_pblock_destroy(pb); return NULL; } slapi_pblock_get(pb, SLAPI_PLUGIN_INTOP_SEARCH_ENTRIES, &entries); if ((entries == NULL) || (entries[0] == NULL)) { slapi_free_search_results_internal(pb); slapi_pblock_destroy(pb); return NULL; } cn = slapi_entry_attr_get_charptr(entries[0], "cn"); slapi_free_search_results_internal(pb); slapi_pblock_destroy(pb); plugin = plugin_get_by_name(cn); slapi_ch_free((void **)&cn); return plugin; } static int slapd_exemode_ldif2db() { int return_value= 0; Slapi_PBlock pb; struct slapdplugin *plugin; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); if ( ldif_file == NULL ) { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: Required argument -i missing\n", 0, 0, 0 ); usage( myname, extraname ); exit( 1 ); } /* this should be the first time this are called! if the init order * is ever changed, these lines should be changed (or erased)! */ mapping_tree_init(); /* * if instance is given, just use it to get the backend. * otherwise, we use included/excluded suffix list to specify a backend. */ if (NULL == cmd_line_instance_name) { char **instances, **ip; int counter; if (lookup_instance_name_by_suffixes(db2ldif_include, db2ldif_exclude, &instances) < 0) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: backend instances name [-n ] or " "included suffix [-s ] need to be specified.\n", 0, 0, 0); exit(1); } if (instances) { for (ip = instances, counter = 0; ip && *ip; ip++, counter++) ; if (counter == 0) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR 1: There is no backend instance to import to.\n", 0, 0, 0); exit(1); } else if (counter > 1) { int i; LDAPDebug(LDAP_DEBUG_ANY, "ERROR: There are multiple backend instances specified:\n", 0, 0, 0); for (i = 0; i < counter; i++) LDAPDebug(LDAP_DEBUG_ANY, " : %s\n", instances[i], 0, 0); exit(1); } else { LDAPDebug(LDAP_DEBUG_ANY, "Backend Instance: %s\n", *instances, 0, 0); cmd_line_instance_name = *instances; } } else { LDAPDebug(LDAP_DEBUG_ANY, "ERROR 2: There is no backend instance to import to.\n", 0, 0, 0); exit(1); } } plugin = lookup_plugin_by_instance_name(cmd_line_instance_name); if (plugin == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find backend '%s'.\n", cmd_line_instance_name, 0, 0); exit(1); } /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if ( add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1 ) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other slapd processes\n", 0, 0, 0 ); exit(1); } /* check for slapi v2 support */ if (! SLAPI_PLUGIN_IS_V2(plugin)) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: %s is too old to do imports.\n", plugin->plg_name, 0, 0); exit(1); } memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = NULL; pb.pb_plugin = plugin; pb.pb_removedupvals = ldif2db_removedupvals; pb.pb_ldif2db_noattrindexes = ldif2db_noattrindexes; pb.pb_ldif_generate_uniqueid = ldif2db_generate_uniqueid; pb.pb_ldif_namespaceid = ldif2db_namespaceid; pb.pb_ldif_encrypt = importexport_encrypt; /* pb.pb_ldif_load_state = ldif2db_load_state; */ pb.pb_instance_name = cmd_line_instance_name; pb.pb_ldif_files = ldif_file; pb.pb_ldif_include = db2ldif_include; pb.pb_ldif_exclude = db2ldif_exclude; pb.pb_task_flags = TASK_RUNNING_FROM_COMMANDLINE; #ifndef _WIN32 main_setuid(slapdFrontendConfig->localuser); #endif if ( plugin->plg_ldif2db != NULL ) { return_value = (*plugin->plg_ldif2db)( &pb ); } else { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: no ldif2db function defined for " "%s\n", plugin->plg_name, 0, 0 ); return_value = -1; } slapi_ch_free((void**)&myname ); charray_free( db2index_attrs ); charray_free(ldif_file); return( return_value ); } static int slapd_exemode_db2ldif(int argc, char** argv) { int return_value= 0; Slapi_PBlock pb; struct slapdplugin *plugin; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); char *my_ldiffile; char **instp; /* this should be the first time this are called! if the init order * is ever changed, these lines should be changed (or erased)! */ mapping_tree_init(); /* * if instance is given, just pass it to the backend. * otherwise, we use included/excluded suffix list to specify a backend. */ if (NULL == cmd_line_instance_names) { char **instances, **ip; int counter; if (lookup_instance_name_by_suffixes(db2ldif_include, db2ldif_exclude, &instances) < 0) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: backend instances name [-n ] or " "included suffix [-s ] need to be specified.\n", 0, 0, 0); exit(1); } if (instances) { for (ip = instances, counter = 0; ip && *ip; ip++, counter++) ; if (counter == 0) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR 1: There is no backend instance to export from.\n", 0, 0, 0); exit(1); } else { LDAPDebug(LDAP_DEBUG_ANY, "Backend Instance: %s\n", *instances, 0, 0); cmd_line_instance_names = instances; } } else { LDAPDebug(LDAP_DEBUG_ANY, "ERROR 2: There is no backend instance to export from.\n", 0, 0, 0); exit(1); } } #ifndef _WIN32 /* [622984] db2lidf -r changes database file ownership * should call setuid before "db2ldif_dump_replica" */ main_setuid(slapdFrontendConfig->localuser); #endif for (instp = cmd_line_instance_names; instp && *instp; instp++) { int release_me = 0; plugin = lookup_plugin_by_instance_name(*instp); if (plugin == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find backend '%s'.\n", *instp, 0, 0); exit(1); } if (plugin->plg_db2ldif == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: no db2ldif function defined for " "backend %s - cannot export\n", *instp, 0, 0); exit(1); } /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if ( add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1 ) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts " "with other slapd processes\n", 0, 0, 0 ); exit(1); } if ( config_is_slapd_lite () && !slapi_config_get_readonly () && is_slapd_running() ) { LDAPDebug( LDAP_DEBUG_ANY, "%s\n", LITE_BACKUP_ERR, 0, 0); exit ( 1 ); } if (! (SLAPI_PLUGIN_IS_V2(plugin))) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: %s is too old to do exports.\n", plugin->plg_name, 0, 0); exit(1); } memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = NULL; pb.pb_plugin = plugin; pb.pb_ldif_include = db2ldif_include; pb.pb_ldif_exclude = db2ldif_exclude; pb.pb_ldif_dump_replica = db2ldif_dump_replica; pb.pb_ldif_dump_uniqueid = db2ldif_dump_uniqueid; pb.pb_ldif_encrypt = importexport_encrypt; pb.pb_instance_name = *instp; pb.pb_task_flags = TASK_RUNNING_FROM_COMMANDLINE; if (is_slapd_running()) pb.pb_server_running = 1; else pb.pb_server_running = 0; if (db2ldif_dump_replica) { eq_init(); /* must be done before plugins started */ ps_init_psearch_system(); /* must come before plugin_startall() */ plugin_startall(argc, argv, 1 /* Start Backends */, 1 /* Start Globals */); eq_start(); /* must be done after plugins started */ } pb.pb_ldif_file = NULL; if ( archive_name ) { /* redirect stdout to this file: */ char *p, *q; #if defined( XP_WIN32 ) char sep = '\\'; if (NULL != strchr(archive_name, '/')) sep = '/'; #else char sep = '/'; #endif my_ldiffile = archive_name; if (ldif_printkey & EXPORT_APPENDMODE) { if (instp == cmd_line_instance_names) { /* first export */ ldif_printkey |= EXPORT_APPENDMODE_1; } else { ldif_printkey &= ~EXPORT_APPENDMODE_1; } } else { /* not APPENDMODE */ if (strcmp(archive_name, "-")) { /* not '-' */ my_ldiffile = (char *)slapi_ch_malloc((unsigned long)(strlen(archive_name) + strlen(*instp) + 2)); p = strrchr(archive_name, sep); if (NULL == p) { sprintf(my_ldiffile, "%s_%s", *instp, archive_name); } else { q = p + 1; *p = '\0'; sprintf(my_ldiffile, "%s%c%s_%s", archive_name, sep, *instp, q); *p = sep; } release_me = 1; } } fprintf(stderr, "ldiffile: %s\n", my_ldiffile); /* just send the filename to the backend and let * the backend open it (so they can do special * stuff for 64-bit fs) */ pb.pb_ldif_file = my_ldiffile; pb.pb_ldif_printkey = ldif_printkey; } return_value = (plugin->plg_db2ldif)( &pb ); if (release_me) { slapi_ch_free((void **)&my_ldiffile); } } slapi_ch_free( (void**)&myname ); if (db2ldif_dump_replica) { plugin_closeall( 1 /* Close Backends */, 1 /* Close Globals */); } return( return_value ); } static int slapd_exemode_suffix2instance() { int return_value = 0; char **instances = NULL; char **suffixes = NULL; char **p, **q, **r; /* this should be the first time this are called! if the init order * is ever changed, these lines should be changed (or erased)! */ mapping_tree_init(); for (p = db2ldif_include; p && *p; p++) { if (lookup_instance_name_by_suffix(*p, &suffixes, &instances, 0) < 0) continue; fprintf(stderr, "Suffix, Instance name pair(s) under \"%s\":\n", *p); if (instances) for (q = suffixes, r = instances; *r; q++, r++) fprintf(stderr, "\tsuffix %s; instance name \"%s\"\n", *q?*q:"-", *r); else fprintf(stderr, "\tNo instance\n"); charray_free(suffixes); suffixes = NULL; charray_free(instances); instances = NULL; } return (return_value); } static int slapd_exemode_db2index() { int return_value= 0; struct slapdplugin *plugin; Slapi_PBlock pb; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); mapping_tree_init(); /* * if instance is given, just use it to get the backend. * otherwise, we use included/excluded suffix list to specify a backend. */ if (NULL == cmd_line_instance_name) { char **instances, **ip; int counter; if (lookup_instance_name_by_suffixes(db2ldif_include, db2ldif_exclude, &instances) < 0) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: backend instances name [-n ] or " "included suffix [-s ] need to be specified.\n", 0, 0, 0); exit(1); } if (instances) { for (ip = instances, counter = 0; ip && *ip; ip++, counter++) ; if (counter == 0) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR 1: There is no backend instance to import to.\n", 0, 0, 0); exit(1); } else if (counter > 1) { int i; LDAPDebug(LDAP_DEBUG_ANY, "ERROR: There are multiple backend instances specified:\n", 0, 0, 0); for (i = 0; i < counter; i++) LDAPDebug(LDAP_DEBUG_ANY, " : %s\n", instances[i], 0, 0); exit(1); } else { LDAPDebug(LDAP_DEBUG_ANY, "Backend Instance: %s\n", *instances, 0, 0); cmd_line_instance_name = *instances; } } else { LDAPDebug(LDAP_DEBUG_ANY, "ERROR 2: There is no backend instance to import to.\n", 0, 0, 0); exit(1); } } plugin = lookup_plugin_by_instance_name(cmd_line_instance_name); if (plugin == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find backend '%s'.\n", cmd_line_instance_name, 0, 0); exit(1); } /* make sure nothing else is running */ if (add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1) { LDAPDebug(LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other " "slapd processes.\n", 0, 0, 0); exit(1); } if ( db2index_attrs == NULL ) { usage( myname, extraname ); exit( 1 ); } memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = NULL; pb.pb_plugin = plugin; pb.pb_db2index_attrs = db2index_attrs; pb.pb_instance_name = cmd_line_instance_name; pb.pb_task_flags = TASK_RUNNING_FROM_COMMANDLINE; #ifndef _WIN32 main_setuid(slapdFrontendConfig->localuser); #endif return_value = (*plugin->plg_db2index)( &pb ); slapi_ch_free( (void**)&myname ); return( return_value ); } static int slapd_exemode_db2archive() { int return_value= 0; Slapi_PBlock pb; struct slapdplugin *backend_plugin; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); if ((backend_plugin = plugin_get_by_name("ldbm database")) == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find the ldbm backend plugin.\n", 0, 0, 0); exit(1); } if (NULL == archive_name) { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: no archive directory supplied\n", 0, 0, 0 ); exit( 1 ); } if ( config_is_slapd_lite () && !slapi_config_get_readonly () && is_slapd_running ()) { LDAPDebug( LDAP_DEBUG_ANY, "%s\n", LITE_BACKUP_ERR, 0, 0); exit ( 1 ); } /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if ( add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1 ) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other slapd processes\n", 0, 0, 0 ); exit(1); } if (compute_init()) { LDAPDebug(LDAP_DEBUG_ANY, "Initialization Failed 0 %d\n",return_value,0,0); exit (1); } memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = NULL; pb.pb_plugin = backend_plugin; pb.pb_instance_name = cmd_line_instance_name; pb.pb_seq_val = archive_name; pb.pb_task_flags = TASK_RUNNING_FROM_COMMANDLINE; #ifndef _WIN32 main_setuid(slapdFrontendConfig->localuser); #endif return_value = (backend_plugin->plg_db2archive)( &pb ); return return_value; } static int slapd_exemode_archive2db() { int return_value= 0; Slapi_PBlock pb; struct slapdplugin *backend_plugin; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); if ((backend_plugin = plugin_get_by_name("ldbm database")) == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find the ldbm backend plugin.\n", 0, 0, 0); exit(1); } if (NULL == archive_name) { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: no archive directory supplied\n", 0, 0, 0 ); exit( 1 ); } /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if ( add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1 ) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other slapd processes\n", 0, 0, 0 ); exit(1); } if (compute_init()) { LDAPDebug(LDAP_DEBUG_ANY, "Initialization Failed 0 %d\n",return_value,0,0); exit (1); } memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = NULL; pb.pb_plugin = backend_plugin; pb.pb_instance_name = cmd_line_instance_name; pb.pb_seq_val = archive_name; pb.pb_task_flags = TASK_RUNNING_FROM_COMMANDLINE; #ifndef _WIN32 main_setuid(slapdFrontendConfig->localuser); #endif return_value = (backend_plugin->plg_archive2db)( &pb ); return return_value; } /* * functions to convert idl from the old format to the new one * (604921) Support a database uprev process any time post-install */ static int slapd_exemode_upgradedb() { int return_value= 0; Slapi_PBlock pb; struct slapdplugin *backend_plugin; slapdFrontendConfig_t *slapdFrontendConfig = getFrontendConfig(); if ( archive_name == NULL ) { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: Required argument -a missing\n", 0, 0, 0 ); usage( myname, extraname ); exit( 1 ); } /* this should be the first time this are called! if the init order * is ever changed, these lines should be changed (or erased)! */ mapping_tree_init(); if ((backend_plugin = plugin_get_by_name("ldbm database")) == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find the ldbm backend plugin.\n", 0, 0, 0); exit(1); } /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if (add_new_slapd_process(slapd_exemode, 0, skip_db_protect_check) == -1) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other slapd processes\n", 0, 0, 0 ); exit(1); } /* check for slapi v2 support */ if (! SLAPI_PLUGIN_IS_V2(backend_plugin)) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: %s is too old to do convert idl.\n", backend_plugin->plg_name, 0, 0); exit(1); } memset( &pb, '\0', sizeof(pb) ); pb.pb_backend = NULL; pb.pb_plugin = backend_plugin; pb.pb_seq_val = archive_name; pb.pb_seq_type = upgradedb_force; pb.pb_task_flags = TASK_RUNNING_FROM_COMMANDLINE; /* borrowing import code, so need to set up the import variables */ pb.pb_ldif_generate_uniqueid = ldif2db_generate_uniqueid; pb.pb_ldif_namespaceid = ldif2db_namespaceid; pb.pb_ldif2db_noattrindexes = 0; pb.pb_removedupvals = 0; #ifndef _WIN32 main_setuid(slapdFrontendConfig->localuser); #endif if ( backend_plugin->plg_upgradedb != NULL ) { return_value = (*backend_plugin->plg_upgradedb)( &pb ); } else { LDAPDebug( LDAP_DEBUG_ANY, "ERROR: no upgradedb function defined for " "%s\n", backend_plugin->plg_name, 0, 0 ); return_value = -1; } slapi_ch_free((void**)&myname ); return( return_value ); } static int slapd_exemode_dbtest() { int return_value= 0; Slapi_PBlock pb; struct slapdplugin *plugin; if (NULL == cmd_line_instance_name) { LDAPDebug(LDAP_DEBUG_ANY, "dbtest: Required argument -n missing\n", 0, 0, 0); usage( myname, extraname ); exit(1); } mapping_tree_init(); plugin = lookup_plugin_by_instance_name(cmd_line_instance_name); if (plugin == NULL) { LDAPDebug(LDAP_DEBUG_ANY, "ERROR: Could not find backend '%s'.\n", cmd_line_instance_name, 0, 0); exit(1); } /* Make sure we aren't going to run slapd in * a mode that is going to conflict with other * slapd processes that are currently running */ if ( add_new_slapd_process(slapd_exemode, db2ldif_dump_replica, skip_db_protect_check) == -1 ) { LDAPDebug( LDAP_DEBUG_ANY, "Shutting down due to possible conflicts with other slapd processes\n", 0, 0, 0 ); exit(1); } pb.pb_backend = NULL; pb.pb_plugin = plugin; pb.pb_instance_name = cmd_line_instance_name; /* For dbtest, we do _not_ change identity (no setuid()) */ return_value= (*plugin->plg_dbtest)( &pb ); return return_value; } #ifdef LDAP_DEBUG /* * Table to associate a string with a debug level. */ static struct slapd_debug_level_entry { int dle_level; /* LDAP_DEBUG_XXX value */ const char *dle_string; /* string equivalent; NULL marks end of list */ char dle_hide; } slapd_debug_level_map[] = { { LDAP_DEBUG_TRACE, "trace", 0 }, { LDAP_DEBUG_PACKETS, "packets", 0 }, { LDAP_DEBUG_ARGS, "arguments", 0 }, { LDAP_DEBUG_ARGS, "args", 1 }, { LDAP_DEBUG_CONNS, "connections", 0 }, { LDAP_DEBUG_CONNS, "conn", 1 }, { LDAP_DEBUG_CONNS, "conns", 1 }, { LDAP_DEBUG_BER, "ber", 0 }, { LDAP_DEBUG_FILTER, "filters", 0 }, { LDAP_DEBUG_CONFIG, "config", 0 }, { LDAP_DEBUG_ACL, "accesscontrol", 0 }, { LDAP_DEBUG_ACL, "acl", 1 }, { LDAP_DEBUG_ACL, "acls", 1 }, { LDAP_DEBUG_STATS, "stats", 0 }, { LDAP_DEBUG_STATS2, "stats2", 0 }, { LDAP_DEBUG_SHELL, "shell", 1 }, { LDAP_DEBUG_PARSE, "parsing", 0 }, { LDAP_DEBUG_HOUSE, "housekeeping", 0 }, { LDAP_DEBUG_REPL, "replication", 0 }, { LDAP_DEBUG_REPL, "repl", 1 }, { LDAP_DEBUG_ANY, "errors", 0 }, { LDAP_DEBUG_ANY, "ANY", 1 }, { LDAP_DEBUG_ANY, "error", 1 }, { LDAP_DEBUG_CACHE, "caches", 0 }, { LDAP_DEBUG_CACHE, "cache", 1 }, { LDAP_DEBUG_PLUGIN, "plugins", 0 }, { LDAP_DEBUG_PLUGIN, "plugin", 1 }, { LDAP_DEBUG_TIMING, "timing", 0 }, { LDAP_DEBUG_ACLSUMMARY,"accesscontrolsummary", 0 }, { LDAP_DEBUG_ALL_LEVELS,"ALL", 0 }, { 0, NULL, 0 } }; /* * Given a string represention of a debug level, map it to a integer value * and return that value. -1 is returned upon error, with a message * printed to stderr. */ static int slapd_debug_level_string2level( const char *s ) { int level, i; char *cur, *next, *scopy; level = 0; cur = scopy = slapi_ch_strdup( s ); for ( cur = scopy; cur != NULL; cur = next ) { if (( next = strchr( cur, '+' )) != NULL ) { *next++ = '\0'; } if ( isdigit( *cur )) { level |= atoi( cur ); } else { for ( i = 0; NULL != slapd_debug_level_map[i].dle_string; ++i ) { if ( strcasecmp( cur, slapd_debug_level_map[i].dle_string ) == 0 ) { level |= slapd_debug_level_map[i].dle_level; break; } } if ( NULL == slapd_debug_level_map[i].dle_string ) { fprintf( stderr, "Unrecognized debug level \"%s\"\n", cur ); return -1; } } } slapi_ch_free( (void **)&scopy ); return level; } /* * Print to stderr the string equivalent of level. * The ANY level is omitted because it is always present. */ static void slapd_debug_level_log( int level ) { int i, count, len; char *msg, *p; level &= ~LDAP_DEBUG_ANY; /* first pass: determine space needed for the debug level string */ len = 1; /* room for '\0' terminator */ count = 0; for ( i = 0; NULL != slapd_debug_level_map[i].dle_string; ++i ) { if ( !slapd_debug_level_map[i].dle_hide && slapd_debug_level_map[i].dle_level != LDAP_DEBUG_ALL_LEVELS && 0 != ( level & slapd_debug_level_map[i].dle_level )) { if ( count > 0 ) { ++len; /* room for '+' character */ } len += strlen( slapd_debug_level_map[i].dle_string ); ++count; } } /* second pass: construct the debug level string */ p = msg = slapi_ch_malloc( len ); count = 0; for ( i = 0; NULL != slapd_debug_level_map[i].dle_string; ++i ) { if ( !slapd_debug_level_map[i].dle_hide && slapd_debug_level_map[i].dle_level != LDAP_DEBUG_ALL_LEVELS && 0 != ( level & slapd_debug_level_map[i].dle_level )) { if ( count > 0 ) { *p++ = '+'; } strcpy( p, slapd_debug_level_map[i].dle_string ); p += strlen( p ); ++count; } } slapi_log_error( SLAPI_LOG_FATAL, SLAPD_VERSION_STR, "%s: %s (%d)\n", "debug level", msg, level ); slapi_ch_free( (void **)&msg ); } /* * Display usage/help for the debug level flag (-d) */ static void slapd_debug_level_usage( void ) { int i; fprintf( stderr, "Debug levels:\n" ); for ( i = 0; NULL != slapd_debug_level_map[i].dle_string; ++i ) { if ( !slapd_debug_level_map[i].dle_hide && slapd_debug_level_map[i].dle_level != LDAP_DEBUG_ALL_LEVELS) { fprintf( stderr, " %6d - %s%s\n", slapd_debug_level_map[i].dle_level, slapd_debug_level_map[i].dle_string, ( 0 == ( slapd_debug_level_map[i].dle_level & LDAP_DEBUG_ANY )) ? "" : " (always logged)" ); } } fprintf( stderr, "To activate multiple levels, add the numeric" " values together or separate the\n" "values with a + character, e.g., all of the following" " have the same effect:\n" " -d connections+filters\n" " -d 8+32\n" " -d 40\n" ); } #endif /* LDAP_DEBUG */