From 9f0d17aa532f7c43e0d849b3d2fdd3488362a493 Mon Sep 17 00:00:00 2001
From: Miroslav Suchý <msuchy@redhat.com>
Date: Fri, 4 Feb 2011 17:41:45 +0100
Subject: Added man pages for pethtool and pifconfig

Signed-off-by: David Sommerseth <davids@redhat.com>
---
 man/pethtool.8.asciidoc  | 81 ++++++++++++++++++++++++++++++++++++++++++++++++
 man/pifconfig.8.asciidoc | 42 +++++++++++++++++++++++++
 2 files changed, 123 insertions(+)
 create mode 100644 man/pethtool.8.asciidoc
 create mode 100644 man/pifconfig.8.asciidoc

(limited to 'man')

diff --git a/man/pethtool.8.asciidoc b/man/pethtool.8.asciidoc
new file mode 100644
index 0000000..167114a
--- /dev/null
+++ b/man/pethtool.8.asciidoc
@@ -0,0 +1,81 @@
+pethtool(8)
+===========
+
+NAME
+----
+pethtool - Display or change ethernet card settings
+
+
+SYNOPSIS
+--------
+pethtool [OPTIONS] [<INTERFACE>]
+
+
+DESCRIPTION
+-----------
+
+This script mimic ethtool behavior, but is written purely in python
+and python module ethtool.
+
+
+OPTIONS
+-------
+
+INTERFACE::
+Is the name of the ethernet device on which pethtool should operate.
+
+-h, --help::
+Show help message and exit.
+
+-c|--show-coalesce::
+Show coalesce options
+
+-C|--coalesce::
+Set coalesce options
+
+                adaptive-rx on|off
+                adaptive-tx on|off
+                rx-usecs N
+                rx-frames N
+                rx-usecs-irq N
+                rx-frames-irq N
+                tx-usecs N
+                tx-frames N
+                tx-usecs-irq N
+                tx-frames-irq N
+                stats-block-usecs N
+                pkt-rate-low N
+                rx-usecs-low N
+                rx-frames-low N
+                tx-usecs-low N
+                tx-frames-low N
+                pkt-rate-high N
+                rx-usecs-high N
+                rx-frames-high N
+                tx-usecs-high N
+                tx-frames-high N
+                sample-interval N
+
+
+-i|--driver::
+Show driver information
+
+-k|--show-offload::
+Get protocol offload information
+
+-K|--offload::
+    Set protocol offload;;
+        [ tso on|off ]
+
+
+
+SEE ALSO
+--------
+ethtool(8)
+
+
+AUTHORS
+-------
+Arnaldo Carvalho de Melo <acme@redhat.com>
+
+Man page written by Miroslav Suchý <msuchy@redhat.com>
diff --git a/man/pifconfig.8.asciidoc b/man/pifconfig.8.asciidoc
new file mode 100644
index 0000000..cbd48b8
--- /dev/null
+++ b/man/pifconfig.8.asciidoc
@@ -0,0 +1,42 @@
+pifconfig(8)
+============
+
+NAME
+----
+pifconfig - display information about a network interface
+
+
+SYNOPSIS
+--------
+pifconfig [INTERFACE]
+
+
+DESCRIPTION
+-----------
+
+This script mimic ifconfig behavior, but is written purely in python
+and python module ethtool.
+
+
+OPTIONS
+-------
+
+INTERFACE::
+Display information about only this interface. If no interface is given
+then all interfaces are displayed.
+
+-h, --help::
+Show help message and exit.
+
+
+SEE ALSO
+--------
+ifconfig(8)
+
+
+
+AUTHORS
+-------
+Arnaldo Carvalho de Melo <acme@redhat.com>
+
+Man page written by Miroslav Suchý <msuchy@redhat.com>
-- 
cgit