# # this is sourced from t_client.sh and defines which openvpn client tests # to run # # (sample config, copy to t_client.rc and adapt to your environment) # # # define these - if empty, no tests will run # top_srcdir="${top_srcdir:-..}" CA_CERT="${top_srcdir}/sample/sample-keys/ca.crt" CLIENT_KEY="${top_srcdir}/sample/sample-keys/client.key" CLIENT_CERT="${top_srcdir}/sample/sample-keys/client.crt" # # remote host (used as macro below) # REMOTE=mytestserver # # tests to run (list suffixes for config stanzas below) # TEST_RUN_LIST="1 2" # # use "sudo" (etc) to give openvpn the necessary privileges # if this is not active, "make check" must be run as root # #RUN_SUDO=sudo # # base confic that is the same for all the p2mp test runs # OPENVPN_BASE_P2MP="--client --ca $CA_CERT \ --cert $CLIENT_CERT --key $CLIENT_KEY \ --ns-cert-type server --nobind --comp-lzo --verb 3" # base config for p2p tests # OPENVPN_BASE_P2P="..." # # # now define the individual tests - all variables suffixed with _1, _2 etc # will be used in test run "1", "2", etc. # # if something is not defined here, the corresponding test is not run # # possible test options: # # RUN_TITLE_x="what is being tested on here" (purely informational) # OPENVPN_CONF_x = "how to call ./openvpn" [mandatory] # EXPECT_IFCONFIG4_x = "this IPv4 address needs to show up in ifconfig" # EXPECT_IFCONFIG6_x = "this IPv6 address needs to show up in ifconfig" # PING4_HOSTS_x = "these hosts musts ping when openvpn is up (IPv4 fping)" # PING6_HOSTS_x = "these hosts musts ping when openvpn is up (IPv6 fping6)" # # Test 1: UDP / p2mp tun # specify IPv4+IPv6 addresses expected from server and ping targets # RUN_TITLE_1="testing tun/udp/ipv4+ipv6" OPENVPN_CONF_1="$OPENVPN_BASE_P2MP --dev tun --proto udp --remote $REMOTE --port 51194" EXPECT_IFCONFIG4_1="10.100.50.6" EXPECT_IFCONFIG6_1="2001:dba:a050::1:0" PING4_HOSTS_1="10.100.50.1 10.100.0.1" PING6_HOSTS_1="2001:dba::1 2001:dba:a050::1" # Test 2: TCP / p2mp tun # RUN_TITLE_2="testing tun/tcp/ipv4+ipv6" OPENVPN_CONF_2="$OPENVPN_BASE_P2MP --dev tun --proto tcp --remote $REMOTE --port 51194" EXPECT_IFCONFIG4_2="10.100.51.6" EXPECT_IFCONFIG6_2="2001:dba:a051::1:0" PING4_HOSTS_2="10.100.51.1 10.100.0.1" PING6_HOSTS_1="2001:dba::1 2001:dba:a051::1" # Test 3: UDP / p2p tun # ... # Test 4: TCP / p2p tun # ... # Test 5: UDP / p2mp tap # ... # Test 6: TCP / p2mp tun # ... # Test 7: UDP / p2p tap # ... # Test 8: TCP / p2p tap # ... # Test 9: whatever you want to test... :-)