summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSamuli Seppänen <samuli@openvpn.net>2015-05-05 16:29:49 +0300
committerGert Doering <gert@greenie.muc.de>2015-05-09 15:36:24 +0200
commite57ab7817a0e4142506b7a23ca8d844b3a4c6dea (patch)
treea233ca1d8cee25a71b2c3f49458272018a7e9814
parent755e12fddf32e6e2bbfce0157d9f17e8f1ff5eb5 (diff)
downloadopenvpn-e57ab7817a0e4142506b7a23ca8d844b3a4c6dea.tar.gz
openvpn-e57ab7817a0e4142506b7a23ca8d844b3a4c6dea.tar.xz
openvpn-e57ab7817a0e4142506b7a23ca8d844b3a4c6dea.zip
Properly escape dashes on the man-page
On UTF-8 systems groff interprets unescaped dashes as hyphens and escaped dashes as minus signs. Unescaped dashes can cause problems when searching for or copying and pasting options. This patch ensures that dashes in command-line options are escaped and that everything else is left unescaped. Trac: 512 URL: http://thread.gmane.org/gmane.network.openvpn.devel/9569 Signed-off-by: Samuli Seppänen <samuli@openvpn.net> Acked-by: Gert Doering <gert@greenie.muc.de> Message-Id: <1430832589-9150-1-git-send-email-samuli@openvpn.net> URL: http://article.gmane.org/gmane.network.openvpn.devel/9648 Signed-off-by: Gert Doering <gert@greenie.muc.de>
-rw-r--r--doc/openvpn.81100
1 files changed, 550 insertions, 550 deletions
diff --git a/doc/openvpn.8 b/doc/openvpn.8
index b955a42..0acffdf 100644
--- a/doc/openvpn.8
+++ b/doc/openvpn.8
@@ -37,7 +37,7 @@
.TH openvpn 8 "17 November 2008"
.\"*********************************************************
.SH NAME
-openvpn \- secure IP tunnel daemon.
+openvpn - secure IP tunnel daemon.
.\"*********************************************************
.SH SYNOPSIS
.ft 3
@@ -231,7 +231,7 @@ Note that since UDP is connectionless, connection failure
is defined by the
.B \-\-ping
and
-.B \-\-ping-restart
+.B \-\-ping\-restart
options.
Note the following corner case: If you use multiple
@@ -270,7 +270,7 @@ chosen, providing a sort of basic load-balancing and
failover capability.
.\"*********************************************************
.TP
-.B \-\-remote-random-hostname
+.B \-\-remote\-random\-hostname
Prepend a random string (6 bytes, 12 hex characters) to hostname to prevent
DNS caching. For example, "foo.bar.gov" would be modified to
"<random-chars>.foo.bar.gov".
@@ -289,7 +289,7 @@ and
An OpenVPN client will try each connection profile sequentially
until it achieves a successful connection.
-.B \-\-remote-random
+.B \-\-remote\-random
can be used to initially "scramble" the connection
list.
@@ -393,14 +393,14 @@ were declared in all
blocks below it.
.\"*********************************************************
.TP
-.B \-\-proto-force p
+.B \-\-proto\-force p
When iterating through connection profiles,
only consider profiles using protocol
.B p
('tcp'|'udp').
.\"*********************************************************
.TP
-.B \-\-remote-random
+.B \-\-remote\-random
When multiple
.B \-\-remote
address/ports are specified, or if connection profiles are being
@@ -430,19 +430,19 @@ For UDP operation,
should be specified on both peers.
For TCP operation, one peer must use
-.B \-\-proto tcp-server
+.B \-\-proto tcp\-server
and the other must use
-.B \-\-proto tcp-client.
+.B \-\-proto tcp\-client.
A peer started with
.B tcp-server
will wait indefinitely for an incoming connection. A peer
started with
-.B tcp-client
+.B tcp\-client
will attempt to connect, and if that fails, will sleep for 5
seconds (adjustable via the
-.B \-\-connect-retry
+.B \-\-connect\-retry
option) and try again infinite or up to N retries (adjustable via the
-.B \-\-connect-retry-max
+.B \-\-connect\-retry\-max
option). Both TCP client and server will simulate
a SIGUSR1 restart signal if either side resets the connection.
@@ -462,9 +462,9 @@ application-level UDP protocols, or tunneling protocols which don't
possess a built-in reliability layer.
.\"*********************************************************
.TP
-.B \-\-connect-retry n
+.B \-\-connect\-retry n
For
-.B \-\-proto tcp-client,
+.B \-\-proto tcp\-client,
take
.B n
as the
@@ -472,29 +472,29 @@ number of seconds to wait
between connection retries (default=5).
.\"*********************************************************
.TP
-.B \-\-connect-timeout n
+.B \-\-connect\-timeout n
For
-.B \-\-proto tcp-client,
+.B \-\-proto tcp\-client,
set connection timeout to
.B n
seconds (default=10).
.\"*********************************************************
.TP
-.B \-\-connect-retry-max n
+.B \-\-connect\-retry\-max n
For
-.B \-\-proto tcp-client,
+.B \-\-proto tcp\-client,
take
.B n
as the
number of retries of connection attempt (default=infinite).
.\"*********************************************************
.TP
-.B \-\-show-proxy-settings
+.B \-\-show\-proxy\-settings
Show sensed HTTP or SOCKS proxy settings. Currently, only Windows clients
support this option.
.\"*********************************************************
.TP
-.B \-\-http-proxy server port [authfile|'auto'|'auto-nct'] [auth-method]
+.B \-\-http\-proxy server port [authfile|'auto'|'auto\-nct'] [auth-method]
Connect to remote host through an HTTP proxy at address
.B server
and port
@@ -511,7 +511,7 @@ HTTP Digest authentication is supported as well, but only via
the
.B auto
or
-.B auto-nct
+.B auto\-nct
flags (below).
The
@@ -523,38 +523,38 @@ username/password credentials, if required. This flag
exists on OpenVPN 2.1 or higher.
The
-.B auto-nct
+.B auto\-nct
flag (no clear-text auth) instructs OpenVPN to automatically
determine the authentication method, but to reject weak
authentication protocols such as HTTP Basic Authentication.
.\"*********************************************************
.TP
-.B \-\-http-proxy-retry
+.B \-\-http\-proxy\-retry
Retry indefinitely on HTTP proxy errors. If an HTTP proxy error
occurs, simulate a SIGUSR1 reset.
.\"*********************************************************
.TP
-.B \-\-http-proxy-timeout n
+.B \-\-http\-proxy\-timeout n
Set proxy timeout to
.B n
seconds, default=5.
.\"*********************************************************
.TP
-.B \-\-http-proxy-option type [parm]
+.B \-\-http\-proxy\-option type [parm]
Set extended HTTP proxy options.
Repeat to set multiple options.
-.B VERSION version \-\-
+.B VERSION version --
Set HTTP version number to
.B version
(default=1.0).
-.B AGENT user-agent \-\-
+.B AGENT user-agent --
Set HTTP "User-Agent" string to
.B user-agent.
.\"*********************************************************
.TP
-.B \-\-socks-proxy server [port] [authfile]
+.B \-\-socks\-proxy server [port] [authfile]
Connect to remote host through a Socks5 proxy at address
.B server
and port
@@ -565,12 +565,12 @@ and port
"stdin" to prompt from console.
.\"*********************************************************
.TP
-.B \-\-socks-proxy-retry
+.B \-\-socks\-proxy\-retry
Retry indefinitely on Socks proxy errors. If a Socks proxy error
occurs, simulate a SIGUSR1 reset.
.\"*********************************************************
.TP
-.B \-\-resolv-retry n
+.B \-\-resolv\-retry n
If hostname resolve fails for
.B \-\-remote,
retry resolve for
@@ -633,7 +633,7 @@ Don't use
in
.B \-\-mode server
mode. Use a
-.B \-\-client-connect
+.B \-\-client\-connect
script instead.
See the "Environmental Variables" section below for
@@ -677,11 +677,11 @@ TCP/UDP port number for remote.
.TP
.B \-\-bind
Bind to local address and port. This is the default unless any of
-.B \-\-proto tcp-client
+.B \-\-proto tcp\-client
,
-.B \-\-http-proxy
+.B \-\-http\-proxy
or
-.B \-\-socks-proxy
+.B \-\-socks\-proxy
are used.
.\"*********************************************************
.TP
@@ -712,7 +712,7 @@ devices encapsulate IPv4 or IPv6 (OSI Layer 3) while
devices encapsulate Ethernet 802.3 (OSI Layer 2).
.\"*********************************************************
.TP
-.B \-\-dev-type device-type
+.B \-\-dev\-type device-type
Which device type are we using?
.B device-type
should be
@@ -741,7 +741,7 @@ topology.
If you set this directive on the server, the
.B \-\-server
and
-.B \-\-server-bridge
+.B \-\-server\-bridge
directives will automatically push your chosen topology setting to clients
as well. This directive can also be manually pushed to clients. Like the
.B \-\-dev
@@ -750,23 +750,23 @@ directive, this directive must always be compatible between client and server.
.B mode
can be one of:
-.B net30 \-\-
+.B net30 --
Use a point-to-point topology, by allocating one /30 subnet per client.
This is designed to allow point-to-point semantics when some
or all of the connecting clients might be Windows systems. This is the
default on OpenVPN 2.0.
-.B p2p \-\-
+.B p2p --
Use a point-to-point topology where the remote endpoint of the client's
tun interface always points to the local endpoint of the server's tun interface.
This mode allocates a single IP address per connecting client.
Only use
when none of the connecting clients are Windows systems. This mode
is functionally equivalent to the
-.B \-\-ifconfig-pool-linear
+.B \-\-ifconfig\-pool\-linear
directive which is available in OpenVPN 2.0 and is now deprecated.
-.B subnet \-\-
+.B subnet --
Use a subnet rather than a point-to-point topology by
configuring the tun interface with a local IP address and subnet mask,
similar to the topology used in
@@ -791,7 +791,7 @@ changes the interpretation of the arguments of
to mean "address netmask", no longer "local remote".
.\"*********************************************************
.TP
-.B \-\-tun-ipv6
+.B \-\-tun\-ipv6
Build a tun link capable of forwarding IPv6 traffic.
Should be used in conjunction with
.B \-\-dev tun
@@ -803,16 +803,16 @@ if no specific IPv6 TUN support for your OS has been compiled into OpenVPN.
See below for further IPv6-related configuration options.
.\"*********************************************************
.TP
-.B \-\-dev-node node
+.B \-\-dev\-node node
Explicitly set the device node rather than using
/dev/net/tun, /dev/tun, /dev/tap, etc. If OpenVPN
cannot figure out whether
.B node
is a TUN or TAP device based on the name, you should
also specify
-.B \-\-dev-type tun
+.B \-\-dev\-type tun
or
-.B \-\-dev-type tap.
+.B \-\-dev\-type tap.
Under Mac OS X this option can be used to specify the default tun
implementation. Using
@@ -831,7 +831,7 @@ is named
in the Network Connections Control Panel or the
raw GUID of the adapter enclosed by braces.
The
-.B \-\-show-adapters
+.B \-\-show\-adapters
option under Windows can also be used
to enumerate all available TAP-Win32
adapters and will show both the network
@@ -882,7 +882,7 @@ you will be pinging across the VPN.
For TAP devices, which provide
the ability to create virtual
ethernet segments, or TUN devices in
-.B --topology subnet
+.B \-\-topology subnet
mode (which create virtual "multipoint networks"),
.B \-\-ifconfig
is used to set an IP address and
@@ -917,14 +917,14 @@ getting an IP address lease from a DHCP
server.
.\"*********************************************************
.TP
-.B \-\-ifconfig-noexec
+.B \-\-ifconfig\-noexec
Don't actually execute ifconfig/netsh commands, instead
pass
.B \-\-ifconfig
parameters to scripts using environmental variables.
.\"*********************************************************
.TP
-.B \-\-ifconfig-nowarn
+.B \-\-ifconfig\-nowarn
Don't output an options consistency check warning
if the
.B \-\-ifconfig
@@ -932,7 +932,7 @@ option on this side of the
connection doesn't match the remote side. This is useful
when you want to retain the overall benefits of the
options consistency check (also see
-.B \-\-disable-occ
+.B \-\-disable\-occ
option) while only disabling the ifconfig component of
the check.
@@ -940,7 +940,7 @@ For example,
if you have a configuration where the local host uses
.B \-\-ifconfig
but the remote host does not, use
-.B \-\-ifconfig-nowarn
+.B \-\-ifconfig\-nowarn
on the local host.
This option will also silence warnings about potential
@@ -962,11 +962,11 @@ while at the same time providing portable semantics
across OpenVPN's platform space.
.B netmask
-default \-\- 255.255.255.255
+default -- 255.255.255.255
.B gateway
-default \-\- taken from
-.B \-\-route-gateway
+default -- taken from
+.B \-\-route\-gateway
or the second parameter to
.B \-\-ifconfig
when
@@ -975,7 +975,7 @@ is specified.
.B metric
default \-\- taken from
-.B \-\-route-metric
+.B \-\-route\-metric
otherwise 0.
The default can be specified by leaving an option blank or setting
@@ -990,9 +990,9 @@ also be specified as a DNS or /etc/hosts
file resolvable name, or as one of three special keywords:
.B vpn_gateway
-\-\- The remote VPN endpoint address
+-- The remote VPN endpoint address
(derived either from
-.B \-\-route-gateway
+.B \-\-route\-gateway
or the second parameter to
.B \-\-ifconfig
when
@@ -1000,23 +1000,23 @@ when
is specified).
.B net_gateway
-\-\- The pre-existing IP default gateway, read from the routing
+-- The pre-existing IP default gateway, read from the routing
table (not supported on all OSes).
.B remote_host
-\-\- The
+-- The
.B \-\-remote
address if OpenVPN is being run in client mode, and is undefined in server mode.
.\"*********************************************************
.TP
-.B \-\-max-routes n
+.B \-\-max\-routes n
Allow a maximum number of n
.B \-\-route
options to be specified, either in the local configuration file,
or pulled from an OpenVPN server. By default, n=100.
.\"*********************************************************
.TP
-.B \-\-route-gateway gw|'dhcp'
+.B \-\-route\-gateway gw|'dhcp'
Specify a default gateway
.B gw
for use with
@@ -1029,14 +1029,14 @@ the gateway address will be extracted from a DHCP
negotiation with the OpenVPN server-side LAN.
.\"*********************************************************
.TP
-.B \-\-route-metric m
+.B \-\-route\-metric m
Specify a default metric
.B m
for use with
.B \-\-route.
.\"*********************************************************
.TP
-.B \-\-route-delay [n] [w]
+.B \-\-route\-delay [n] [w]
Delay
.B n
seconds (default=0) after connection
@@ -1044,7 +1044,7 @@ establishment, before adding routes. If
.B n
is 0, routes will be added immediately upon connection
establishment. If
-.B \-\-route-delay
+.B \-\-route\-delay
is omitted, routes will be added immediately after TUN/TAP device
open and
.B \-\-up
@@ -1062,18 +1062,18 @@ tap adapter addresses. The delay will give the DHCP handshake
time to complete before routes are added.
On Windows,
-.B \-\-route-delay
+.B \-\-route\-delay
tries to be more intelligent by waiting
.B w
seconds (w=30 by default)
for the TAP-Win32 adapter to come up before adding routes.
.\"*********************************************************
.TP
-.B \-\-route-up cmd
+.B \-\-route\-up cmd
Run command
.B cmd
after routes are added, subject to
-.B \-\-route-delay.
+.B \-\-route\-delay.
.B cmd
consists of a path to script (or executable program), optionally
@@ -1084,7 +1084,7 @@ See the "Environmental Variables" section below for
additional parameters passed as environmental variables.
.\"*********************************************************
.TP
-.B \-\-route-pre-down cmd
+.B \-\-route\-pre\-down cmd
Run command
.B cmd
before routes are removed upon disconnection.
@@ -1098,13 +1098,13 @@ See the "Environmental Variables" section below for
additional parameters passed as environmental variables.
.\"*********************************************************
.TP
-.B \-\-route-noexec
+.B \-\-route\-noexec
Don't add or remove routes automatically. Instead pass routes to
-.B \-\-route-up
+.B \-\-route\-up
script using environmental variables.
.\"*********************************************************
.TP
-.B \-\-route-nopull
+.B \-\-route\-nopull
When used with
.B \-\-client
or
@@ -1118,16 +1118,16 @@ however note that this option still allows the server
to set the TCP/IP properties of the client's TUN/TAP interface.
.\"*********************************************************
.TP
-.B \-\-allow-pull-fqdn
+.B \-\-allow\-pull\-fqdn
Allow client to pull DNS names from server (rather than being limited
to IP address) for
.B \-\-ifconfig,
.B \-\-route,
and
-.B \-\-route-gateway.
+.B \-\-route\-gateway.
.\"*********************************************************
.TP
-.B \-\-client-nat snat|dnat network netmask alias
+.B \-\-client\-nat snat|dnat network netmask alias
This pushable client option sets up a stateless one-to-one NAT
rule on packet addresses (not ports), and is useful in cases
where routes or ifconfig settings pushed to the client would
@@ -1152,7 +1152,7 @@ for debugging info showing the transformation of src/dest
addresses in packets.
.\"*********************************************************
.TP
-.B \-\-redirect-gateway flags...
+.B \-\-redirect\-gateway flags...
Automatically execute routing commands to cause all outgoing IP traffic
to be redirected over the VPN. This is a client-side option.
@@ -1171,7 +1171,7 @@ Delete the default gateway route.
.B (3)
Set the new default gateway to be the VPN endpoint address (derived either from
-.B \-\-route-gateway
+.B \-\-route\-gateway
or the second parameter to
.B \-\-ifconfig
when
@@ -1183,7 +1183,7 @@ that the original default route is restored.
Option flags:
-.B local \-\-
+.B local --
Add the
.B local
flag if both OpenVPN servers are directly connected via a common subnet,
@@ -1193,48 +1193,48 @@ flag will cause step
.B 1
above to be omitted.
-.B autolocal \-\-
+.B autolocal --
Try to automatically determine whether to enable
.B local
flag above.
-.B def1 \-\-
+.B def1 --
Use this flag to override
the default gateway by using 0.0.0.0/1 and 128.0.0.0/1
rather than 0.0.0.0/0. This has the benefit of overriding
but not wiping out the original default gateway.
-.B bypass-dhcp \-\-
+.B bypass-dhcp --
Add a direct route to the DHCP server (if it is non-local) which
bypasses the tunnel
(Available on Windows clients, may not be available
on non-Windows clients).
-.B bypass-dns \-\-
+.B bypass-dns --
Add a direct route to the DNS server(s) (if they are non-local) which
bypasses the tunnel
(Available on Windows clients, may not be available
on non-Windows clients).
-.B block-local \-\-
+.B block-local --
Block access to local LAN when the tunnel is active, except for
the LAN gateway itself. This is accomplished by routing the local
LAN (except for the LAN gateway address) into the tunnel.
.\"*********************************************************
.TP
-.B \-\-link-mtu n
+.B \-\-link\-mtu n
Sets an upper bound on the size of UDP packets which are sent
between OpenVPN peers. It's best not to set this parameter unless
you know what you're doing.
.\"*********************************************************
.\"*********************************************************
.TP
-.B \-\-redirect-private [flags]
-Like \-\-redirect-gateway, but omit actually changing the default
+.B \-\-redirect\-private [flags]
+Like \-\-redirect\-gateway, but omit actually changing the default
gateway. Useful when pushing private subnets.
.\"*********************************************************
.TP
-.B \-\-tun-mtu n
+.B \-\-tun\-mtu n
Take the TUN device MTU to be
.B n
and derive the link MTU
@@ -1256,11 +1256,11 @@ and/or
options to deal with MTU sizing issues.
.\"*********************************************************
.TP
-.B \-\-tun-mtu-extra n
+.B \-\-tun\-mtu\-extra n
Assume that the TUN/TAP device might return as many as
.B n
bytes more than the
-.B \-\-tun-mtu
+.B \-\-tun\-mtu
size on read. This parameter defaults to 0, which is sufficient for
most TUN devices. TAP devices may introduce additional overhead in excess
of the MTU size, and a setting of 32 is the default when TAP devices are used.
@@ -1268,30 +1268,30 @@ This parameter only controls internal OpenVPN buffer sizing,
so there is no transmission overhead associated with using a larger value.
.\"*********************************************************
.TP
-.B \-\-mtu-disc type
+.B \-\-mtu\-disc type
Should we do Path MTU discovery on TCP/UDP channel? Only supported on OSes such
as Linux that supports the necessary system call to set.
.B 'no'
-\-\- Never send DF (Don't Fragment) frames
+-- Never send DF (Don't Fragment) frames
.br
.B 'maybe'
-\-\- Use per-route hints
+-- Use per-route hints
.br
.B 'yes'
-\-\- Always DF (Don't Fragment)
+-- Always DF (Don't Fragment)
.br
.\"*********************************************************
.TP
-.B \-\-mtu-test
+.B \-\-mtu\-test
To empirically measure MTU on connection startup,
add the
-.B \-\-mtu-test
+.B \-\-mtu\-test
option to your configuration.
OpenVPN will send ping packets of various sizes
to the remote peer and measure the largest packets
which were successfully received. The
-.B \-\-mtu-test
+.B \-\-mtu\-test
process normally takes about 3 minutes to complete.
.\"*********************************************************
.TP
@@ -1305,7 +1305,7 @@ bytes.
The
.B max
parameter is interpreted in the same way as the
-.B \-\-link-mtu
+.B \-\-link\-mtu
parameter, i.e. the UDP packet size after encapsulation
overhead has been added in, but not including
the UDP header itself.
@@ -1347,7 +1347,7 @@ bytes. The default value is
The
.B max
parameter is interpreted in the same way as the
-.B \-\-link-mtu
+.B \-\-link\-mtu
parameter, i.e. the UDP packet size after encapsulation
overhead has been added in, but not including
the UDP header itself.
@@ -1397,7 +1397,7 @@ Therefore, one could lower the maximum UDP packet size
to 1300 (a good first try for solving MTU-related
connection problems) with the following options:
-.B \-\-tun-mtu 1500 \-\-fragment 1300 \-\-mssfix
+.B \-\-tun\-mtu 1500 \-\-fragment 1300 \-\-mssfix
.\"*********************************************************
.TP
.B \-\-sndbuf size
@@ -1416,7 +1416,7 @@ matched in policy routing and packetfilter rules. This option is
only supported in Linux and does nothing on other operating systems.
.\"*********************************************************
.TP
-.B \-\-socket-flags flags...
+.B \-\-socket\-flags flags...
Apply the given flags to the OpenVPN transport socket.
Currently, only
.B TCP_NODELAY
@@ -1508,9 +1508,9 @@ seconds (specify
on both peers to cause ping packets to be sent in both directions since
OpenVPN ping packets are not echoed like IP ping packets).
When used in one of OpenVPN's secure modes (where
-.B \-\-secret, \-\-tls-server,
+.B \-\-secret, \-\-tls\-server,
or
-.B \-\-tls-client
+.B \-\-tls\-client
is specified), the ping packet
will be cryptographically secure.
@@ -1523,11 +1523,11 @@ pass will not time out.
(2) To provide a basis for the remote to test the existence
of its peer using the
-.B \-\-ping-exit
+.B \-\-ping\-exit
option.
.\"*********************************************************
.TP
-.B \-\-ping-exit n
+.B \-\-ping\-exit n
Causes OpenVPN to exit after
.B n
seconds pass without reception of a ping
@@ -1535,21 +1535,21 @@ or other packet from remote.
This option can be combined with
.B \-\-inactive, \-\-ping,
and
-.B \-\-ping-exit
+.B \-\-ping\-exit
to create a two-tiered inactivity disconnect.
For example,
-.B openvpn [options...] \-\-inactive 3600 \-\-ping 10 \-\-ping-exit 60
+.B openvpn [options...] \-\-inactive 3600 \-\-ping 10 \-\-ping\-exit 60
when used on both peers will cause OpenVPN to exit within 60
seconds if its peer disconnects, but will exit after one
hour if no actual tunnel data is exchanged.
.\"*********************************************************
.TP
-.B \-\-ping-restart n
+.B \-\-ping\-restart n
Similar to
-.B \-\-ping-exit,
+.B \-\-ping\-exit,
but trigger a
.B SIGUSR1
restart after
@@ -1570,11 +1570,11 @@ If the peer cannot be reached, a restart will be triggered, causing
the hostname used with
.B \-\-remote
to be re-resolved (if
-.B \-\-resolv-retry
+.B \-\-resolv\-retry
is also specified).
In server mode,
-.B \-\-ping-restart, \-\-inactive,
+.B \-\-ping\-restart, \-\-inactive,
or any other type of internally generated signal will always be
applied to
individual client instance objects, never to whole server itself.
@@ -1583,14 +1583,14 @@ which would normally cause a restart, will cause the deletion
of the client instance object instead.
In client mode, the
-.B \-\-ping-restart
+.B \-\-ping\-restart
parameter is set to 120 seconds by default. This default will
hold until the client pulls a replacement value from the server, based on
the
.B \-\-keepalive
setting in the server configuration.
To disable the 120 second default, set
-.B \-\-ping-restart 0
+.B \-\-ping\-restart 0
on the client.
See the signals section below for more information
@@ -1600,15 +1600,15 @@ on
Note that the behavior of
.B SIGUSR1
can be modified by the
-.B \-\-persist-tun, \-\-persist-key, \-\-persist-local-ip,
+.B \-\-persist\-tun, \-\-persist\-key, \-\-persist\-local\-ip,
and
-.B \-\-persist-remote-ip
+.B \-\-persist\-remote\-ip
options.
Also note that
-.B \-\-ping-exit
+.B \-\-ping\-exit
and
-.B \-\-ping-restart
+.B \-\-ping\-restart
are mutually exclusive and cannot be used together.
.\"*********************************************************
.TP
@@ -1616,7 +1616,7 @@ are mutually exclusive and cannot be used together.
A helper directive designed to simplify the expression of
.B \-\-ping
and
-.B \-\-ping-restart
+.B \-\-ping\-restart
in server mode configurations.
The server timeout is set twice the value of the second argument.
@@ -1643,11 +1643,11 @@ expands as follows:
.fi
.\"*********************************************************
.TP
-.B \-\-ping-timer-rem
+.B \-\-ping\-timer\-rem
Run the
-.B \-\-ping-exit
+.B \-\-ping\-exit
/
-.B \-\-ping-restart
+.B \-\-ping\-restart
timer only if we have a remote address. Use this option if you are
starting the daemon in listen mode (i.e. without an explicit
.B \-\-remote
@@ -1655,12 +1655,12 @@ peer), and you don't want to start clocking timeouts until a remote
peer connects.
.\"*********************************************************
.TP
-.B \-\-persist-tun
+.B \-\-persist\-tun
Don't close and reopen TUN/TAP device or run up/down scripts
across
.B SIGUSR1
or
-.B \-\-ping-restart
+.B \-\-ping\-restart
restarts.
.B SIGUSR1
@@ -1670,11 +1670,11 @@ but which offers finer-grained control over
reset options.
.\"*********************************************************
.TP
-.B \-\-persist-key
+.B \-\-persist\-key
Don't re-read key files across
.B SIGUSR1
or
-.B \-\-ping-restart.
+.B \-\-ping\-restart.
This option can be combined with
.B \-\-user nobody
@@ -1690,21 +1690,21 @@ This option solves the problem by persisting keys across
resets, so they don't need to be re-read.
.\"*********************************************************
.TP
-.B \-\-persist-local-ip
+.B \-\-persist\-local\-ip
Preserve initially resolved local IP address and port number
across
.B SIGUSR1
or
-.B \-\-ping-restart
+.B \-\-ping\-restart
restarts.
.\"*********************************************************
.TP
-.B \-\-persist-remote-ip
+.B \-\-persist\-remote\-ip
Preserve most recently authenticated remote IP address and port number
across
.B SIGUSR1
or
-.B \-\-ping-restart
+.B \-\-ping\-restart
restarts.
.\"*********************************************************
.TP
@@ -1782,19 +1782,19 @@ In this context, the last command line parameter passed to the script
will be
.I init.
If the
-.B \-\-up-restart
+.B \-\-up\-restart
option is also used, the up script will be called for restarts as
well. A restart is considered to be a partial reinitialization
of OpenVPN where the TUN/TAP instance is preserved (the
-.B \-\-persist-tun
+.B \-\-persist\-tun
option will enable such preservation). A restart
can be generated by a SIGUSR1 signal, a
-.B \-\-ping-restart
+.B \-\-ping\-restart
timeout, or a connection reset when the TCP protocol is enabled
with the
.B \-\-proto
option. If a restart occurs, and
-.B \-\-up-restart
+.B \-\-up\-restart
has been specified, the up script will be called with
.I restart
as the last parameter.
@@ -1806,7 +1806,7 @@ script can be called in both an initialization and restart context.
9999 is blocked by your firewall. Also, the example will run indefinitely,
so you should abort with control-c).
-.B openvpn \-\-dev tun \-\-port 9999 \-\-verb 4 \-\-ping-restart 10 \-\-up 'echo up' \-\-down 'echo down' \-\-persist-tun \-\-up-restart
+.B openvpn \-\-dev tun \-\-port 9999 \-\-verb 4 \-\-ping\-restart 10 \-\-up 'echo up' \-\-down 'echo down' \-\-persist\-tun \-\-up\-restart
Note that OpenVPN also provides the
.B \-\-ifconfig
@@ -1825,10 +1825,10 @@ and remote endpoints on the command line to the
.B \-\-up
script so that they can be used to configure routes such as:
-.B route add -net 10.0.0.0 netmask 255.255.255.0 gw $5
+.B route add \-net 10.0.0.0 netmask 255.255.255.0 gw $5
.\"*********************************************************
.TP
-.B \-\-up-delay
+.B \-\-up\-delay
Delay TUN/TAP open and possible
.B \-\-up
script execution
@@ -1874,13 +1874,13 @@ your
script will also run at reduced privilege.
.\"*********************************************************
.TP
-.B \-\-down-pre
+.B \-\-down\-pre
Call
.B \-\-down
cmd/script before, rather than after, TUN/TAP close.
.\"*********************************************************
.TP
-.B \-\-up-restart
+.B \-\-up\-restart
Enable the
.B \-\-up
and
@@ -1919,10 +1919,10 @@ Versions prior to OpenVPN 2.3.3 will always ignore options set with the
directive.
See also
-.B \-\-ignore-unknown-option
+.B \-\-ignore\-unknown\-option
.\"*********************************************************
.TP
-.B \-\-setenv-safe name value
+.B \-\-setenv\-safe name value
Set a custom environmental variable
.B OPENVPN_name=value
to pass to script.
@@ -1933,13 +1933,13 @@ is a safety precaution to prevent a LD_PRELOAD style attack
from a malicious or compromised server.
.\"*********************************************************
.TP
-.B \-\-ignore-unknown-option opt1 opt2 opt3 ... optN
+.B \-\-ignore\-unknown\-option opt1 opt2 opt3 ... optN
When one of options
.B opt1 ... optN
is encountered in the configuration file the configuration
file parsing does not fail if this OpenVPN version does not
support the option. Multiple
-.B \-\-ignore-unknown-option
+.B \-\-ignore\-unknown\-option
options can be given to support a larger number of options to ignore.
This option should be used with caution, as there are good security
@@ -1948,27 +1948,27 @@ config file. Having said that, there are valid reasons for wanting
new software features to gracefully degrade when encountered by
older software versions.
-.B \-\-ignore-unknown-option
+.B \-\-ignore\-unknown\-option
is available since OpenVPN 2.3.3.
.\"*********************************************************
.TP
-.B \-\-script-security level
+.B \-\-script\-security level
This directive offers policy-level control over OpenVPN's usage of external programs
and scripts. Lower
.B level
values are more restrictive, higher values are more permissive. Settings for
.B level:
-.B 0 \-\-
+.B 0 --
Strictly no calling of external programs.
.br
-.B 1 \-\-
+.B 1 --
(Default) Only call built-in executables such as ifconfig, ip, route, or netsh.
.br
-.B 2 \-\-
+.B 2 --
Allow calling of built-in executables and user-defined scripts.
.br
-.B 3 \-\-
+.B 3 --
Allow passwords to be passed to scripts via environmental variables (potentially unsafe).
OpenVPN releases before v2.3 also supported a
@@ -2007,7 +2007,7 @@ flag was removed is due to the security implications with shell expansions
when executing scripts via the system() call.
.\"*********************************************************
.TP
-.B \-\-disable-occ
+.B \-\-disable\-occ
Don't output a warning message if option inconsistencies are detected between
peers. An example of an option inconsistency would be where one peer uses
.B \-\-dev tun
@@ -2135,9 +2135,9 @@ allow many things required only during initialization.
Like with chroot, complications can result when scripts
or restarts are executed after the setcon operation,
which is why you should really consider using the
-.B \-\-persist-key
+.B \-\-persist\-key
and
-.B \-\-persist-tun
+.B \-\-persist\-tun
options.
.\"*********************************************************
.TP
@@ -2187,7 +2187,7 @@ directive above for description of
.B progname
parameter.
.TP
-.B \-\-errors-to-stderr
+.B \-\-errors\-to\-stderr
Output errors to stderr instead of stdout unless log output is redirected by one of the
.B \-\-log
options.
@@ -2208,7 +2208,7 @@ option must match what is specified in the inetd/xinetd
config file. The
.B nowait
mode can only be used with
-.B \-\-proto tcp-server.
+.B \-\-proto tcp\-server.
The default is
.B wait.
The
@@ -2257,14 +2257,14 @@ is also specified.
This option is persistent over the entire course of
an OpenVPN instantiation and will not be reset by SIGHUP,
SIGUSR1, or
-.B \-\-ping-restart.
+.B \-\-ping\-restart.
Note that on Windows, when OpenVPN is started as a service,
logging occurs by default without the need to specify
this option.
.\"*********************************************************
.TP
-.B \-\-log-append file
+.B \-\-log\-append file
Append logging messages to
.B file.
If
@@ -2276,7 +2276,7 @@ except that it appends to rather
than truncating the log file.
.\"*********************************************************
.TP
-.B \-\-suppress-timestamps
+.B \-\-suppress\-timestamps
Avoid writing timestamps to log messages, even when they
otherwise would be prepended. In particular, this applies to
log messages sent to stdout.
@@ -2296,14 +2296,14 @@ greater than 0 is lower priority,
less than zero is higher priority).
.\"*********************************************************
.\".TP
-.\".B \-\-nice-work n
+.\".B \-\-nice\-work n
.\"Change priority of background TLS work thread. The TLS thread
.\"feature is enabled when OpenVPN is built
.\"with pthread support, and you are running OpenVPN
.\"in TLS mode (i.e. with
-.\".B \-\-tls-client
+.\".B \-\-tls\-client
.\"or
-.\".B \-\-tls-server
+.\".B \-\-tls\-server
.\"specified).
.\"
.\"Using a TLS thread offloads the CPU-intensive process of SSL/TLS-based
@@ -2318,7 +2318,7 @@ less than zero is higher priority).
.\"than the main thread.
.\"*********************************************************
.TP
-.B \-\-fast-io
+.B \-\-fast\-io
(Experimental) Optimize TUN/TAP/UDP I/O writes by avoiding
a call to poll/epoll/select prior to the write operation. The purpose
of such a call would normally be to block until the device
@@ -2364,7 +2364,7 @@ Designed to be used to send messages to a controlling application
which is receiving the OpenVPN log output.
.\"*********************************************************
.TP
-.B \-\-remap-usr1 signal
+.B \-\-remap\-usr1 signal
Control whether internally or externally
generated SIGUSR1 signals are remapped to
SIGHUP (restart without persisting state) or
@@ -2382,13 +2382,13 @@ Set output verbosity to
Level 3 is recommended if you want a good summary
of what's happening without being swamped by output.
-.B 0 \-\-
+.B 0 --
No output except fatal errors.
.br
-.B 1 to 4 \-\-
+.B 1 to 4 --
Normal usage range.
.br
-.B 5 \-\-
+.B 5 --
Output
.B R
and
@@ -2396,7 +2396,7 @@ and
characters to the console for each packet read and write, uppercase is
used for TCP/UDP packets and lowercase is used for TUN/TAP packets.
.br
-.B 6 to 11 \-\-
+.B 6 to 11 --
Debug info range (see errlevel.h for additional
information on debug levels).
.\"*********************************************************
@@ -2413,7 +2413,7 @@ Status can also be written to the syslog by sending a
signal.
.\"*********************************************************
.TP
-.B \-\-status-version [n]
+.B \-\-status\-version [n]
Choose the status file format version number. Currently
.B n
can be 1, 2, or 3 and defaults to 1.
@@ -2426,8 +2426,8 @@ consecutive messages in the same category. This is useful to
limit repetitive logging of similar message types.
.\"*********************************************************
.TP
-.B \-\-comp-lzo [mode]
-Use fast LZO compression \-\- may add up to 1 byte per
+.B \-\-comp\-lzo [mode]
+Use fast LZO compression -- may add up to 1 byte per
packet for incompressible data.
.B mode
may be "yes", "no", or "adaptive" (default).
@@ -2437,16 +2437,16 @@ compression on or off for individual clients.
First, make sure the client-side config file enables selective
compression by having at least one
-.B \-\-comp-lzo
+.B \-\-comp\-lzo
directive, such as
-.B \-\-comp-lzo no.
+.B \-\-comp\-lzo no.
This will turn off compression by default,
but allow a future directive push from the server to
dynamically change the
on/off/adaptive setting.
Next in a
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
file, specify the compression setting for the client,
for example:
@@ -2454,7 +2454,7 @@ for example:
.ft 3
.in +4
comp-lzo yes
-push "comp-lzo yes"
+push "comp\-lzo yes"
.in -4
.ft
.fi
@@ -2465,12 +2465,12 @@ setting for the server
side of the link, the second sets the client side.
.\"*********************************************************
.TP
-.B \-\-comp-noadapt
+.B \-\-comp\-noadapt
When used in conjunction with
-.B \-\-comp-lzo,
+.B \-\-comp\-lzo,
this option will disable OpenVPN's adaptive compression algorithm.
Normally, adaptive compression is enabled with
-.B \-\-comp-lzo.
+.B \-\-comp\-lzo.
Adaptive compression tries to optimize the case where you have
compression enabled, but you are sending predominantly incompressible
@@ -2501,9 +2501,9 @@ and set
.B port
to 'unix'. While the default behavior is to create a unix domain socket
that may be connected to by any process, the
-.B \-\-management-client-user
+.B \-\-management\-client\-user
and
-.B \-\-management-client-group
+.B \-\-management\-client\-group
directives can be used to restrict access.
The management interface provides a special mode where the TCP
@@ -2531,7 +2531,7 @@ be set to 127.0.0.1
(localhost) to restrict accessibility of the management
server to local clients.
.TP
-.B \-\-management-client
+.B \-\-management\-client
Management interface will connect as a TCP/unix domain client to
.B IP:port
specified by
@@ -2542,41 +2542,41 @@ If the client connection fails to connect or is disconnected,
a SIGTERM signal will be generated causing OpenVPN to quit.
.\"*********************************************************
.TP
-.B \-\-management-query-passwords
+.B \-\-management\-query\-passwords
Query management channel for private key password and
-.B \-\-auth-user-pass
+.B \-\-auth\-user\-pass
username/password. Only query the management channel
for inputs which ordinarily would have been queried from the
console.
.\"*********************************************************
.TP
-.B \-\-management-query-proxy
+.B \-\-management\-query\-proxy
Query management channel for proxy server information for a specific
.B \-\-remote
(client-only).
.\"*********************************************************
.TP
-.B \-\-management-query-remote
+.B \-\-management\-query\-remote
Allow management interface to override
.B \-\-remote
directives (client-only).
.\"*********************************************************
-.B \-\-management-external-key
+.B \-\-management\-external\-key
Allows usage for external private key file instead of
.B \-\-key
option (client-only).
.\"*********************************************************
.TP
-.B \-\-management-forget-disconnect
+.B \-\-management\-forget\-disconnect
Make OpenVPN forget passwords when management session
disconnects.
This directive does not affect the
-.B \-\-http-proxy
+.B \-\-http\-proxy
username/password. It is always cached.
.\"*********************************************************
.TP
-.B \-\-management-hold
+.B \-\-management\-hold
Start OpenVPN in a hibernating state, until a client
of the management interface explicitly starts it
with the
@@ -2584,45 +2584,45 @@ with the
command.
.\"*********************************************************
.TP
-.B \-\-management-signal
+.B \-\-management\-signal
Send SIGUSR1 signal to OpenVPN if management session disconnects.
This is useful when you wish to disconnect an OpenVPN session on
-user logoff. For --management-client this option is not needed since
+user logoff. For \-\-management\-client this option is not needed since
a disconnect will always generate a SIGTERM.
.\"*********************************************************
.TP
-.B \-\-management-log-cache n
+.B \-\-management\-log\-cache n
Cache the most recent
.B n
lines of log file history for usage
by the management channel.
.\"*********************************************************
.TP
-.B \-\-management-up-down
+.B \-\-management\-up\-down
Report tunnel up/down events to management interface.
.B
.\"*********************************************************
.TP
-.B \-\-management-client-auth
+.B \-\-management\-client\-auth
Gives management interface client the responsibility
to authenticate clients after their client certificate
has been verified. See management-notes.txt in OpenVPN
distribution for detailed notes.
.\"*********************************************************
.TP
-.B \-\-management-client-pf
+.B \-\-management\-client\-pf
Management interface clients must specify a packet
filter file for each connecting client. See management-notes.txt
in OpenVPN distribution for detailed notes.
.\"*********************************************************
.TP
-.B \-\-management-client-user u
+.B \-\-management\-client\-user u
When the management interface is listening on a unix domain socket,
only allow connections from user
.B u.
.\"*********************************************************
.TP
-.B \-\-management-client-group g
+.B \-\-management\-client\-group g
When the management interface is listening on a unix domain socket,
only allow connections from group
.B g.
@@ -2719,13 +2719,13 @@ expands as follows:
Don't use
.B \-\-server
if you are ethernet bridging. Use
-.B \-\-server-bridge
+.B \-\-server\-bridge
instead.
.\"*********************************************************
.TP
-.B \-\-server-bridge gateway netmask pool-start-IP pool-end-IP
+.B \-\-server\-bridge gateway netmask pool-start-IP pool-end-IP
.TP
-.B \-\-server-bridge ['nogw']
+.B \-\-server\-bridge ['nogw']
A helper directive similar to
.B \-\-server
@@ -2733,7 +2733,7 @@ which is designed to simplify the configuration
of OpenVPN's server mode in ethernet bridging configurations.
If
-.B \-\-server-bridge
+.B \-\-server\-bridge
is used without any parameters, it will enable a DHCP-proxy
mode, where connecting OpenVPN clients will receive an IP
address for their TAP adapter from the DHCP server running
@@ -2761,7 +2761,7 @@ IP/netmask on the bridge interface. The
and
.B netmask
parameters to
-.B \-\-server-bridge
+.B \-\-server\-bridge
can be set to either the IP/netmask of the
bridge interface, or the IP/netmask of the
default gateway/router on the bridged
@@ -2793,7 +2793,7 @@ push "route-gateway 10.8.0.4"
.fi
In another example,
-.B \-\-server-bridge
+.B \-\-server\-bridge
(without parameters) expands as follows:
.nf
@@ -2808,7 +2808,7 @@ push "route-gateway dhcp"
.fi
Or
-.B \-\-server-bridge nogw
+.B \-\-server\-bridge nogw
expands as follows:
.nf
@@ -2838,26 +2838,26 @@ cannot be pushed because the client needs to know
them before the connection to the server can be initiated.
This is a partial list of options which can currently be pushed:
-.B \-\-route, \-\-route-gateway, \-\-route-delay, \-\-redirect-gateway,
-.B \-\-ip-win32, \-\-dhcp-option,
-.B \-\-inactive, \-\-ping, \-\-ping-exit, \-\-ping-restart,
+.B \-\-route, \-\-route\-gateway, \-\-route\-delay, \-\-redirect\-gateway,
+.B \-\-ip\-win32, \-\-dhcp\-option,
+.B \-\-inactive, \-\-ping, \-\-ping\-exit, \-\-ping\-restart,
.B \-\-setenv,
-.B \-\-persist-key, \-\-persist-tun, \-\-echo,
-.B \-\-comp-lzo,
-.B \-\-socket-flags,
+.B \-\-persist\-key, \-\-persist\-tun, \-\-echo,
+.B \-\-comp\-lzo,
+.B \-\-socket\-flags,
.B \-\-sndbuf, \-\-rcvbuf
.\"*********************************************************
.TP
-.B \-\-push-reset
+.B \-\-push\-reset
Don't inherit the global push list for a specific client instance.
Specify this option in a client-specific context such
as with a
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
configuration file. This option will ignore
.B \-\-push
options at the global config file level.
.TP
-.B \-\-push-peer-info
+.B \-\-push\-peer\-info
Push additional information about the client to server. The additional information
consists of the following data:
@@ -2877,19 +2877,19 @@ Disable a particular client (based on the common name)
from connecting. Don't use this option to disable a client
due to key or password compromise. Use a CRL (certificate
revocation list) instead (see the
-.B \-\-crl-verify
+.B \-\-crl\-verify
option).
This option must be associated with a specific client instance,
which means that it must be specified either in a client
instance config file using
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
or dynamically generated using a
-.B \-\-client-connect
+.B \-\-client\-connect
script.
.\"*********************************************************
.TP
-.B \-\-ifconfig-pool start-IP end-IP [netmask]
+.B \-\-ifconfig\-pool start-IP end-IP [netmask]
Set aside a pool of subnets to be
dynamically allocated to connecting clients, similar
to a DHCP server. For tun-style
@@ -2902,7 +2902,7 @@ parameter will also be pushed to clients.
.\"*********************************************************
.TP
-.B \-\-ifconfig-pool-persist file [seconds]
+.B \-\-ifconfig\-pool\-persist file [seconds]
Persist/unpersist ifconfig-pool
data to
.B file,
@@ -2917,7 +2917,7 @@ IP address assigned to them from the ifconfig-pool.
Maintaining a long-term
association is good for clients because it allows them
to effectively use the
-.B \-\-persist-tun
+.B \-\-persist\-tun
option.
.B file
@@ -2938,12 +2938,12 @@ suggestions only, based on past associations between
a common name and IP address. They do not guarantee that the given common
name will always receive the given IP address. If you want guaranteed
assignment, use
-.B \-\-ifconfig-push
+.B \-\-ifconfig\-push
.\"*********************************************************
.TP
-.B \-\-ifconfig-pool-linear
+.B \-\-ifconfig\-pool\-linear
Modifies the
-.B \-\-ifconfig-pool
+.B \-\-ifconfig\-pool
directive to
allocate individual TUN interface addresses for
clients rather than /30 subnets. NOTE: This option
@@ -2954,9 +2954,9 @@ This option is deprecated, and should be replaced with
which is functionally equivalent.
.\"*********************************************************
.TP
-.B \-\-ifconfig-push local remote-netmask [alias]
+.B \-\-ifconfig\-push local remote-netmask [alias]
Push virtual IP endpoints for client tunnel,
-overriding the \-\-ifconfig-pool dynamic allocation.
+overriding the \-\-ifconfig\-pool dynamic allocation.
The parameters
.B local
@@ -2968,7 +2968,7 @@ directive which you want to execute on the client machine to
configure the remote end of the tunnel. Note that the parameters
.B local
and
-.B remote-netmask
+.B remote\-netmask
are from the perspective of the client, not the server. They may be
DNS names rather than IP addresses, in which case they will be resolved
on the server at the time of client connection.
@@ -2985,9 +2985,9 @@ will refer to the client view.
This option must be associated with a specific client instance,
which means that it must be specified either in a client
instance config file using
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
or dynamically generated using a
-.B \-\-client-connect
+.B \-\-client\-connect
script.
Remember also to include a
@@ -3001,18 +3001,18 @@ OpenVPN's internal client IP address selection algorithm works as
follows:
.B 1
-\-\- Use
-.B \-\-client-connect script
+-- Use
+.B \-\-client\-connect script
generated file for static IP (first choice).
.br
.B 2
-\-\- Use
-.B \-\-client-config-dir
+-- Use
+.B \-\-client\-config\-dir
file for static IP (next choice).
.br
.B 3
-\-\- Use
-.B \-\-ifconfig-pool
+-- Use
+.B \-\-ifconfig\-pool
allocation for dynamic IP (last choice).
.br
.\"*********************************************************
@@ -3039,9 +3039,9 @@ directive routes to the specific client.
This option must be specified either in a client
instance config file using
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
or dynamically generated using a
-.B \-\-client-connect
+.B \-\-client\-connect
script.
The
@@ -3057,7 +3057,7 @@ subnet, you can use
.B \-\-push
"route ..."
together with
-.B \-\-client-to-client
+.B \-\-client\-to\-client
to effect this. In order for all clients to see
A's subnet, OpenVPN must push this route to all clients
EXCEPT for A, since the subnet is already owned by A.
@@ -3066,11 +3066,11 @@ not pushing a route to a client
if it matches one of the client's iroutes.
.\"*********************************************************
.TP
-.B \-\-client-to-client
+.B \-\-client\-to\-client
Because the OpenVPN server mode handles multiple clients
through a single tun or tap interface, it is effectively
a router. The
-.B \-\-client-to-client
+.B \-\-client\-to\-client
flag tells OpenVPN to internally route client-to-client
traffic rather than pushing all client-originating traffic
to the TUN/TAP interface.
@@ -3082,13 +3082,13 @@ if you want to firewall tunnel traffic using
custom, per-client rules.
.\"*********************************************************
.TP
-.B \-\-duplicate-cn
+.B \-\-duplicate\-cn
Allow multiple clients with the same common name to concurrently connect.
In the absence of this option, OpenVPN will disconnect a client instance
upon connection of a new client having the same common name.
.\"*********************************************************
.TP
-.B \-\-client-connect cmd
+.B \-\-client\-connect cmd
Run
.B command cmd
on client connection.
@@ -3113,7 +3113,7 @@ to be applied on the server when the client connects,
it should write it to the file named by the last argument.
See the
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
option below for options which
can be legally used in a dynamically generated config file.
@@ -3125,18 +3125,18 @@ returns a non-zero error status, it will cause the client
to be disconnected.
.\"*********************************************************
.TP
-.B \-\-client-disconnect cmd
+.B \-\-client\-disconnect cmd
Like
-.B \-\-client-connect
+.B \-\-client\-connect
but called on client instance shutdown. Will not be called
unless the
-.B \-\-client-connect
+.B \-\-client\-connect
script and plugins (if defined)
were previously called on this instance with
successful (0) status returns.
The exception to this rule is if the
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
command or plugins are cascaded, and at least one client-connect
function succeeded, then ALL of the client-disconnect functions for
scripts and plugins will be called on client instance object deletion,
@@ -3144,16 +3144,16 @@ even in cases where some of the related client-connect functions returned
an error status.
The
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
command is passed the same pathname as the corresponding
-.B \-\-client-connect
+.B \-\-client\-connect
command as its last argument. (after any arguments specified in
.B cmd
).
.B
.\"*********************************************************
.TP
-.B \-\-client-config-dir dir
+.B \-\-client\-config\-dir dir
Specify a directory
.B dir
for custom client config files. After
@@ -3169,7 +3169,7 @@ after it has dropped it's root privileges.
This file can specify a fixed IP address for a given
client using
-.B \-\-ifconfig-push,
+.B \-\-ifconfig\-push,
as well as fixed subnets owned by the client using
.B \-\-iroute.
@@ -3180,19 +3180,19 @@ without needing to restart the server.
The following
options are legal in a client-specific context:
-.B \-\-push, \-\-push-reset, \-\-iroute, \-\-ifconfig-push,
+.B \-\-push, \-\-push\-reset, \-\-iroute, \-\-ifconfig\-push,
and
.B \-\-config.
.\"*********************************************************
.TP
-.B \-\-ccd-exclusive
+.B \-\-ccd\-exclusive
Require, as a
condition of authentication, that a connecting client has a
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
file.
.\"*********************************************************
.TP
-.B \-\-tmp-dir dir
+.B \-\-tmp\-dir dir
Specify a directory
.B dir
for temporary files. This directory will be used by
@@ -3204,7 +3204,7 @@ after it has dropped it's root privileges.
This directory will be used by in the following cases:
*
-.B \-\-client-connect
+.B \-\-client\-connect
scripts to dynamically generate client-specific
configuration files.
@@ -3218,7 +3218,7 @@ when using deferred auth method
plugin hook to pass filtering rules via pf_file
.\"*********************************************************
.TP
-.B \-\-hash-size r v
+.B \-\-hash\-size r v
Set the size of the real address hash table to
.B r
and the virtual address table to
@@ -3226,13 +3226,13 @@ and the virtual address table to
By default, both tables are sized at 256 buckets.
.\"*********************************************************
.TP
-.B \-\-bcast-buffers n
+.B \-\-bcast\-buffers n
Allocate
.B n
buffers for broadcast datagrams (default=256).
.\"*********************************************************
.TP
-.B \-\-tcp-queue-limit n
+.B \-\-tcp\-queue\-limit n
Maximum number of output packets queued before TCP (default=64).
When OpenVPN is tunneling data from a TUN/TAP device to a
@@ -3244,7 +3244,7 @@ OpenVPN will start to drop outgoing packets directed
at this client.
.\"*********************************************************
.TP
-.B \-\-tcp-nodelay
+.B \-\-tcp\-nodelay
This macro sets the TCP_NODELAY socket flag on the server
as well as pushes it to connecting clients. The TCP_NODELAY
flag disables the Nagle algorithm on TCP sockets causing
@@ -3267,13 +3267,13 @@ The macro expands as follows:
.fi
.\"*********************************************************
.TP
-.B \-\-max-clients n
+.B \-\-max\-clients n
Limit server to a maximum of
.B n
concurrent clients.
.\"*********************************************************
.TP
-.B \-\-max-routes-per-client n
+.B \-\-max\-routes\-per\-client n
Allow a maximum of
.B n
internal routes per client (default=256).
@@ -3283,9 +3283,9 @@ server with packets appearing to come from many unique MAC addresses,
forcing the server to deplete
virtual memory as its internal routing table expands.
This directive can be used in a
-.B \-\-client-config-dir
+.B \-\-client\-config\-dir
file or auto-generated by a
-.B \-\-client-connect
+.B \-\-client\-connect
script to override the global value for a particular client.
Note that this
@@ -3293,7 +3293,7 @@ directive affects OpenVPN's internal routing table, not the
kernel routing table.
.\"*********************************************************
.TP
-.B \-\-stale-routes-check n [t]
+.B \-\-stale\-routes\-check n [t]
Remove routes haven't had activity for
.B n
seconds (i.e. the ageing time).
@@ -3309,10 +3309,10 @@ is not present it defaults to
This option helps to keep the dynamic routing table small.
See also
-.B \-\-max-routes-per-client
+.B \-\-max\-routes\-per\-client
.\"*********************************************************
.TP
-.B \-\-connect-freq n sec
+.B \-\-connect\-freq n sec
Allow a maximum of
.B n
new connections per
@@ -3328,10 +3328,10 @@ For the best protection against DoS attacks in server mode,
use
.B \-\-proto udp
and
-.B \-\-tls-auth.
+.B \-\-tls\-auth.
.\"*********************************************************
.TP
-.B \-\-learn-address cmd
+.B \-\-learn\-address cmd
Run command
.B cmd
to validate client virtual addresses or routes.
@@ -3345,19 +3345,19 @@ Three arguments will be appended to any arguments in
.B cmd
as follows:
-.B [1] operation \-\-
+.B [1] operation --
"add", "update", or "delete" based on whether or not
the address is being added to, modified, or deleted from
OpenVPN's internal routing table.
.br
-.B [2] address \-\-
+.B [2] address --
The address being learned or unlearned. This can be
an IPv4 address such as "198.162.10.14", an IPv4 subnet
such as "198.162.10.0/24", or an ethernet MAC address (when
.B \-\-dev tap
is being used) such as "00:FF:01:02:03:04".
.br
-.B [3] common name \-\-
+.B [3] common name --
The common name on the certificate associated with the
client linked to this address. Only present for "add"
or "update" operations, not "delete".
@@ -3377,7 +3377,7 @@ policies with regard to the client's high-level common name,
rather than the low level client virtual addresses.
.\"*********************************************************
.TP
-.B \-\-auth-user-pass-verify cmd method
+.B \-\-auth\-user\-pass\-verify cmd method
Require the client to provide a username/password (possibly
in addition to a client certificate) for authentication.
@@ -3413,10 +3413,10 @@ will be passed as an argument to
and the file will be automatically deleted by OpenVPN after
the script returns. The location of the temporary file is
controlled by the
-.B \-\-tmp-dir
+.B \-\-tmp\-dir
option, and will default to the current directory if unspecified.
For security, consider setting
-.B \-\-tmp-dir
+.B \-\-tmp\-dir
to a volatile storage medium such as
.B /dev/shm
(if available) to prevent the username/password file from touching the hard drive.
@@ -3448,7 +3448,7 @@ For a sample script that performs PAM authentication, see
in the OpenVPN source distribution.
.\"*********************************************************
.TP
-.B \-\-opt-verify
+.B \-\-opt\-verify
Clients that connect with options that are incompatible
with those of the server will be disconnected.
@@ -3458,16 +3458,16 @@ comp-lzo, fragment, keydir, cipher, auth, keysize, secret,
no-replay, no-iv, tls-auth, key-method, tls-server, and tls-client.
This option requires that
-.B \-\-disable-occ
+.B \-\-disable\-occ
NOT be used.
.\"*********************************************************
.TP
-.B \-\-auth-user-pass-optional
+.B \-\-auth\-user\-pass\-optional
Allow connections by clients that do not specify a username/password.
Normally, when
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
or
-.B \-\-management-client-auth
+.B \-\-management\-client\-auth
is specified (or an authentication plugin module), the
OpenVPN server daemon will require connecting clients to specify a
username and password. This option makes the submission of a username/password
@@ -3480,29 +3480,29 @@ to empty strings (""). The authentication module/script MUST have logic
to detect this condition and respond accordingly.
.\"*********************************************************
.TP
-.B \-\-client-cert-not-required
+.B \-\-client\-cert\-not\-required
Don't require client certificate, client will authenticate
using username/password only. Be aware that using this directive
is less secure than requiring certificates from all clients.
If you use this directive, the
entire responsibility of authentication will rest on your
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
script, so keep in mind that bugs in your script
could potentially compromise the security of your VPN.
If you don't use this directive, but you also specify an
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
script, then OpenVPN will perform double authentication. The
client certificate verification AND the
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
script will need to succeed in order for a client to be
authenticated and accepted onto the VPN.
.\"*********************************************************
.TP
-.B \-\-username-as-common-name
+.B \-\-username\-as\-common\-name
For
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
authentication, use
the authenticated username as the common name,
rather than the common name from the client cert.
@@ -3554,9 +3554,9 @@ carriage-return. no-remapping is only available on the server side.
This option is immediately deprecated. It is only implemented
to make the transition to the new formatting less intrusive. It will be
removed either in OpenVPN v2.4 or v2.5. So please make sure you use the
-.B \-\-verify-x509-name
+.B \-\-verify\-x509\-name
option instead of
-.B \-\-tls-remote
+.B \-\-tls\-remote
as soon as possible and update your scripts where necessary.
.\"*********************************************************
.TP
@@ -3577,7 +3577,7 @@ described with the
option as soon as possible.
.\"*********************************************************
.TP
-.B \-\-port-share host port [dir]
+.B \-\-port\-share host port [dir]
When run in TCP server mode, share the OpenVPN port with
another application, such as an HTTPS server. If OpenVPN
senses a connection to its port which is using a non-OpenVPN
@@ -3602,7 +3602,7 @@ Not implemented on Windows.
.SS Client Mode
Use client mode when connecting to an OpenVPN server
which has
-.B \-\-server, \-\-server-bridge,
+.B \-\-server, \-\-server\-bridge,
or
.B \-\-mode server
in it's configuration.
@@ -3643,12 +3643,12 @@ in situations where you don't trust the server to have control
over the client's routing table.
.\"*********************************************************
.TP
-.B \-\-auth-user-pass [up]
+.B \-\-auth\-user\-pass [up]
Authenticate with server using username/password.
.B up
is a file containing username/password on 2 lines (Note: OpenVPN
will only read passwords from a file if it has been built
-with the \-\-enable-password-save configure option, or on Windows
+with the \-\-enable\-password\-save configure option, or on Windows
by defining ENABLE_PASSWORD_SAVE in win/settings.in).
If
@@ -3657,12 +3657,12 @@ is omitted, username/password will be prompted from the
console.
The server configuration must specify an
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
script to verify the username/password provided by
the client.
.\"*********************************************************
.TP
-.B \-\-auth-retry type
+.B \-\-auth\-retry type
Controls how OpenVPN responds to username/password verification
errors such as the client-side response to an AUTH_FAILED message from the server
or verification failure of the private key password.
@@ -3673,26 +3673,26 @@ of error.
An AUTH_FAILED message is generated by the server if the client
fails
-.B \-\-auth-user-pass
+.B \-\-auth\-user\-pass
authentication, or if the server-side
-.B \-\-client-connect
+.B \-\-client\-connect
script returns an error status when the client
tries to connect.
.B type
can be one of:
-.B none \-\-
+.B none --
Client will exit with a fatal error (this is the default).
.br
-.B nointeract \-\-
+.B nointeract --
Client will retry the connection without requerying for an
-.B \-\-auth-user-pass
+.B \-\-auth\-user\-pass
username/password. Use this option for unattended clients.
.br
-.B interact \-\-
+.B interact --
Client will requery for an
-.B \-\-auth-user-pass
+.B \-\-auth\-user\-pass
username/password and/or private key password before attempting a reconnection.
Note that while this option cannot be pushed, it can be controlled
@@ -3714,14 +3714,14 @@ See management\-notes.txt in the OpenVPN distribution for a
description of the OpenVPN challenge/response protocol.
.\"*********************************************************
.TP
-.B \-\-server-poll-timeout n
+.B \-\-server\-poll\-timeout n
when polling possible remote servers to connect to
in a round-robin fashion, spend no more than
.B n
seconds waiting for a response before trying the next server.
.\"*********************************************************
.TP
-.B \-\-explicit-exit-notify [n]
+.B \-\-explicit\-exit\-notify [n]
In UDP client mode or point-to-point mode, send server/peer an exit notification
if tunnel is restarted or OpenVPN process is exited. In client mode, on
exit/restart, this
@@ -3803,9 +3803,9 @@ would see nothing
but random-looking data.
.\"*********************************************************
.TP
-.B \-\-key-direction
+.B \-\-key\-direction
Alternative way of specifying the optional direction parameter for the
-.B \-\-tls-auth
+.B \-\-tls\-auth
and
.B \-\-secret
options. Useful when using inline files (See section on inline files).
@@ -3854,7 +3854,7 @@ For more information on blowfish, see
To see other ciphers that are available with
OpenVPN, use the
-.B \-\-show-ciphers
+.B \-\-show\-ciphers
option.
OpenVPN supports the CBC, CFB, and OFB cipher modes,
@@ -3869,7 +3869,7 @@ to disable encryption.
.B \-\-keysize n
Size of cipher key in bits (optional).
If unspecified, defaults to cipher-specific default. The
-.B \-\-show-ciphers
+.B \-\-show\-ciphers
option (see below) shows all available OpenSSL ciphers,
their default key sizes, and whether the key size can
be changed. Use care in changing a cipher's default
@@ -3901,12 +3901,12 @@ If
.B engine-name
is specified,
use a specific crypto engine. Use the
-.B \-\-show-engines
+.B \-\-show\-engines
standalone option to list the crypto engines which are
supported by OpenSSL.
.\"*********************************************************
.TP
-.B \-\-no-replay
+.B \-\-no\-replay
(Advanced) Disable OpenVPN's protection against replay attacks.
Don't use this option unless you are prepared to make
a tradeoff of greater efficiency in exchange for less
@@ -3950,7 +3950,7 @@ algorithm used
by IPSec.
.\"*********************************************************
.TP
-.B \-\-replay-window n [t]
+.B \-\-replay\-window n [t]
Use a replay protection sliding-window of size
.B n
and a time window of
@@ -3979,7 +3979,7 @@ the TCP/IP protocol stack, provided they satisfy several constraints.
.B (a)
The packet cannot be a replay (unless
-.B \-\-no-replay
+.B \-\-no\-replay
is specified, which disables replay protection altogether).
.B (b)
@@ -4037,7 +4037,7 @@ parameters of what is to be expected from the physical IP layer. The problem
is easily fixed by simply using TCP as the VPN transport layer.
.\"*********************************************************
.TP
-.B \-\-mute-replay-warnings
+.B \-\-mute\-replay\-warnings
Silence the output of replay warnings, which are a common
false alarm on WiFi networks. This option preserves
the security of the replay protection code without
@@ -4045,7 +4045,7 @@ the verbosity associated with warnings about duplicate
packets.
.\"*********************************************************
.TP
-.B \-\-replay-persist file
+.B \-\-replay\-persist file
Persist replay-protection state across sessions using
.B file
to save and reload the state.
@@ -4066,10 +4066,10 @@ This option only makes sense when replay protection is enabled
(the default) and you are using either
.B \-\-secret
(shared-secret key mode) or TLS mode with
-.B \-\-tls-auth.
+.B \-\-tls\-auth.
.\"*********************************************************
.TP
-.B \-\-no-iv
+.B \-\-no\-iv
(Advanced) Disable OpenVPN's use of IV (cipher initialization vector).
Don't use this option unless you are prepared to make
a tradeoff of greater efficiency in exchange for less
@@ -4090,7 +4090,7 @@ space-saving optimization that uses the unique identifier for
datagram replay protection as the IV.
.\"*********************************************************
.TP
-.B \-\-use-prediction-resistance
+.B \-\-use\-prediction\-resistance
Enable prediction resistance on PolarSSL's RNG.
Enabling prediction resistance causes the RNG to reseed in each
@@ -4104,7 +4104,7 @@ Note that this option only works with PolarSSL versions greater
than 1.1.
.\"*********************************************************
.TP
-.B \-\-test-crypto
+.B \-\-test\-crypto
Do a self-test of OpenVPN's crypto options by encrypting and
decrypting test packets using the data channel encryption options
specified above. This option does not require a peer to function,
@@ -4114,14 +4114,14 @@ or
.B \-\-remote.
The typical usage of
-.B \-\-test-crypto
+.B \-\-test\-crypto
would be something like this:
-.B openvpn \-\-test-crypto \-\-secret key
+.B openvpn \-\-test\-crypto \-\-secret key
or
-.B openvpn \-\-test-crypto \-\-secret key \-\-verb 9
+.B openvpn \-\-test\-crypto \-\-secret key \-\-verb 9
This option is very useful to test OpenVPN after it has been ported to
a new platform, or to isolate problems in the compiler, OpenSSL
@@ -4172,14 +4172,14 @@ The easy-rsa package is also rendered in web form here:
.I http://openvpn.net/easyrsa.html
.\"*********************************************************
.TP
-.B \-\-tls-server
+.B \-\-tls\-server
Enable TLS and assume server role during TLS handshake. Note that
OpenVPN is designed as a peer-to-peer application. The designation
of client or server is only for the purpose of negotiating the TLS
control channel.
.\"*********************************************************
.TP
-.B \-\-tls-client
+.B \-\-tls\-client
Enable TLS and assume client role during TLS handshake.
.\"*********************************************************
.TP
@@ -4190,7 +4190,7 @@ certificate. This file can have multiple
certificates in .pem format, concatenated together. You can construct your own
certificate authority certificate and private key by using a command such as:
-.B openssl req -nodes -new -x509 -keyout ca.key -out ca.crt
+.B openssl req \-nodes \-new \-x509 \-keyout ca.key \-out ca.crt
Then edit your openssl.cnf file and edit the
.B certificate
@@ -4214,10 +4214,10 @@ Not available with PolarSSL.
.B \-\-dh file
File containing Diffie Hellman parameters
in .pem format (required for
-.B \-\-tls-server
+.B \-\-tls\-server
only). Use
-.B openssl dhparam -out dh1024.pem 1024
+.B openssl dhparam \-out dh1024.pem 1024
to generate your own, or use the existing dh1024.pem file
included with the OpenVPN distribution. Diffie Hellman parameters
@@ -4225,7 +4225,7 @@ may be considered public.
.\"*********************************************************
.TP
.B \-\-cert file
-Local peer's signed certificate in .pem format \-\- must be signed
+Local peer's signed certificate in .pem format -- must be signed
by a certificate authority whose certificate is in
.B \-\-ca file.
Each peer in an OpenVPN link running in TLS mode should have its own
@@ -4240,14 +4240,14 @@ helping to finance the world's second space tourist :).
To generate a certificate,
you can use a command such as:
-.B openssl req -nodes -new -keyout mycert.key -out mycert.csr
+.B openssl req \-nodes \-new \-keyout mycert.key \-out mycert.csr
If your certificate authority private key lives on another machine, copy
the certificate signing request (mycert.csr) to this other machine (this can
be done over an insecure channel such as email). Now sign the certificate
with a command such as:
-.B openssl ca -out mycert.crt -in mycert.csr
+.B openssl ca \-out mycert.crt \-in mycert.csr
Now copy the certificate (mycert.crt)
back to the peer which initially generated the .csr file (this
@@ -4257,7 +4257,7 @@ Note that the
command reads the location of the certificate authority key from its
configuration file such as
.B /usr/share/ssl/openssl.cnf
-\-\- note also
+-- note also
that for certificate authority functions, you must set up the files
.B index.txt
(may be empty) and
@@ -4268,7 +4268,7 @@ that for certificate authority functions, you must set up the files
).
.\"*********************************************************
.TP
-.B \-\-extra-certs file
+.B \-\-extra\-certs file
Specify a
.B file
containing one or more PEM certs (concatenated together)
@@ -4287,11 +4287,11 @@ file.
.B \-\-key file
Local peer's private key in .pem format. Use the private key which was generated
when you built your peer's certificate (see
-.B -cert file
+.B \-\-cert file
above).
.\"*********************************************************
.TP
-.B \-\-tls-version-min version ['or-highest']
+.B \-\-tls\-version\-min version ['or\-highest']
Enable TLS version negotiation, and set the minimum
TLS version we will accept from the peer (default is "1.0").
Examples for version
@@ -4300,11 +4300,11 @@ and version is not recognized, we will only accept the highest TLS
version supported by the local SSL implementation.
Also see
-.B \-\-tls-version-max
+.B \-\-tls\-version\-max
below, for information on compatibility.
.\"*********************************************************
.TP
-.B \-\-tls-version-max version
+.B \-\-tls\-version\-max version
Set the maximum TLS version we will use (default is the highest version
supported). Examples for version include "1.0", "1.1", or "1.2".
@@ -4324,7 +4324,7 @@ and
Not available with PolarSSL.
.\"*********************************************************
.TP
-.B \-\-verify-hash hash
+.B \-\-verify\-hash hash
Specify SHA1 fingerprint for level-1 cert. The level-1 cert is the
CA (or intermediate cert) that signs the leaf certificate, and is
one removed from the leaf certificate in the direction of the root.
@@ -4335,36 +4335,36 @@ or certificate verification will fail. Hash is specified
as XX:XX:... For example: AD:B0:95:D8:09:C8:36:45:12:A9:89:C8:90:09:CB:13:72:A6:AD:16
.\"*********************************************************
.TP
-.B \-\-pkcs11-cert-private [0|1]...
+.B \-\-pkcs11\-cert\-private [0|1]...
Set if access to certificate object should be performed after login.
Every provider has its own setting.
.\"*********************************************************
.TP
-.B \-\-pkcs11-id name
+.B \-\-pkcs11\-id name
Specify the serialized certificate id to be used. The id can be gotten
by the standalone
-.B \-\-show-pkcs11-ids
+.B \-\-show\-pkcs11\-ids
option.
.\"*********************************************************
.TP
-.B \-\-pkcs11-id-management
+.B \-\-pkcs11\-id\-management
Acquire PKCS#11 id from management interface. In this case a NEED-STR 'pkcs11-id-request'
real-time message will be triggered, application may use pkcs11-id-count command to
retrieve available number of certificates, and pkcs11-id-get command to retrieve certificate
id and certificate body.
.\"*********************************************************
.TP
-.B \-\-pkcs11-pin-cache seconds
+.B \-\-pkcs11\-pin\-cache seconds
Specify how many seconds the PIN can be cached, the default is until the token is removed.
.\"*********************************************************
.TP
-.B \-\-pkcs11-protected-authentication [0|1]...
+.B \-\-pkcs11\-protected\-authentication [0|1]...
Use PKCS#11 protected authentication path, useful for biometric and external
keypad devices.
Every provider has its own setting.
.\"*********************************************************
.TP
-.B \-\-pkcs11-providers provider...
+.B \-\-pkcs11\-providers provider...
Specify a RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) providers
to load.
This option can be used instead of
@@ -4383,25 +4383,25 @@ options are specified without
being given.
.\"*********************************************************
.TP
-.B \-\-pkcs11-private-mode mode...
+.B \-\-pkcs11\-private\-mode mode...
Specify which method to use in order to perform private key operations.
A different mode can be specified for each provider.
Mode is encoded as hex number, and can be a mask one of the following:
.B 0
-(default) \-\- Try to determine automatically.
+(default) -- Try to determine automatically.
.br
.B 1
-\-\- Use sign.
+-- Use sign.
.br
.B 2
-\-\- Use sign recover.
+-- Use sign recover.
.br
.B 4
-\-\- Use decrypt.
+-- Use decrypt.
.br
.B 8
-\-\- Use unwrap.
+-- Use unwrap.
.br
.\"*********************************************************
.TP
@@ -4438,7 +4438,7 @@ Certificate Store GUI.
.\"*********************************************************
.TP
-.B \-\-key-method m
+.B \-\-key\-method m
Use data channel key negotiation method
.B m.
The key method must match on both sides of the connection.
@@ -4466,16 +4466,16 @@ of keying occur:
of the connection producing certificates and verifying the certificate
(or other authentication info provided) of
the other side. The
-.B \-\-key-method
+.B \-\-key\-method
parameter has no effect on this process.
(2) After the TLS connection is established, the tunnel session keys are
separately negotiated over the existing secure TLS channel. Here,
-.B \-\-key-method
+.B \-\-key\-method
determines the derivation of the tunnel session keys.
.\"*********************************************************
.TP
-.B \-\-tls-cipher l
+.B \-\-tls\-cipher l
A list
.B l
of allowable TLS ciphers delimited by a colon (":").
@@ -4485,11 +4485,11 @@ version rollback attack where a man-in-the-middle attacker tries
to force two peers to negotiate to the lowest level
of security they both support.
Use
-.B \-\-show-tls
+.B \-\-show\-tls
to see a list of supported TLS ciphers.
.\"*********************************************************
.TP
-.B \-\-tls-timeout n
+.B \-\-tls\-timeout n
Packet retransmit timeout on TLS control channel
if no acknowledgment from remote within
.B n
@@ -4506,7 +4506,7 @@ the higher level network protocols running on top of the tunnel
such as TCP expect this role to be left to them.
.\"*********************************************************
.TP
-.B \-\-reneg-bytes n
+.B \-\-reneg\-bytes n
Renegotiate data channel key after
.B n
bytes sent or received (disabled by default).
@@ -4516,13 +4516,13 @@ a number of seconds. A key renegotiation will be forced
if any of these three criteria are met by either peer.
.\"*********************************************************
.TP
-.B \-\-reneg-pkts n
+.B \-\-reneg\-pkts n
Renegotiate data channel key after
.B n
packets sent and received (disabled by default).
.\"*********************************************************
.TP
-.B \-\-reneg-sec n
+.B \-\-reneg\-sec n
Renegotiate data channel key after
.B n
seconds (default=3600).
@@ -4533,16 +4533,16 @@ cause the end user to be challenged to reauthorize once per hour.
Also, keep in mind that this option can be used on both the client and server,
and whichever uses the lower value will be the one to trigger the renegotiation.
A common mistake is to set
-.B \-\-reneg-sec
+.B \-\-reneg\-sec
to a higher value on either the client or server, while the other side of the connection
is still using the default value of 3600 seconds, meaning that the renegotiation will
-still occur once per 3600 seconds. The solution is to increase \-\-reneg-sec on both the
+still occur once per 3600 seconds. The solution is to increase \-\-reneg\-sec on both the
client and server, or set it to 0 on one side of the connection (to disable), and to
your chosen value on the other side.
.\"*********************************************************
.TP
-.B \-\-hand-window n
-Handshake Window \-\- the TLS-based key exchange must finalize within
+.B \-\-hand\-window n
+Handshake Window -- the TLS-based key exchange must finalize within
.B n
seconds
of handshake initiation by any peer (default = 60 seconds).
@@ -4550,47 +4550,47 @@ If the handshake fails
we will attempt to reset our connection with our peer and try again.
Even in the event of handshake failure we will still use
our expiring key for up to
-.B \-\-tran-window
+.B \-\-tran\-window
seconds to maintain continuity of transmission of tunnel
data.
.\"*********************************************************
.TP
-.B \-\-tran-window n
-Transition window \-\- our old key can live this many seconds
+.B \-\-tran\-window n
+Transition window -- our old key can live this many seconds
after a new a key renegotiation begins (default = 3600 seconds).
This feature allows for a graceful transition from old to new
key, and removes the key renegotiation sequence from the critical
path of tunnel data forwarding.
.\"*********************************************************
.TP
-.B \-\-single-session
+.B \-\-single\-session
After initially connecting to a remote peer, disallow any new connections.
Using this
option means that a remote peer cannot connect, disconnect, and then
reconnect.
If the daemon is reset by a signal or
-.B \-\-ping-restart,
+.B \-\-ping\-restart,
it will allow one new connection.
-.B \-\-single-session
+.B \-\-single\-session
can be used with
-.B \-\-ping-exit
+.B \-\-ping\-exit
or
.B \-\-inactive
to create a single dynamic session that will exit when finished.
.\"*********************************************************
.TP
-.B \-\-tls-exit
+.B \-\-tls\-exit
Exit on TLS negotiation failure.
.\"*********************************************************
.TP
-.B \-\-tls-auth file [direction]
+.B \-\-tls\-auth file [direction]
Add an additional layer of HMAC authentication on top of the TLS
control channel to protect against DoS attacks.
In a nutshell,
-.B \-\-tls-auth
+.B \-\-tls\-auth
enables a kind of "HMAC firewall" on OpenVPN's TCP/UDP port,
where TLS control channel packets
bearing an incorrect HMAC signature can be dropped immediately without
@@ -4625,7 +4625,7 @@ option for more information on the optional
.B direction
parameter.
-.B \-\-tls-auth
+.B \-\-tls\-auth
is recommended when you are running OpenVPN in a mode where
it is listening for packets from any IP address, such as when
.B \-\-remote
@@ -4659,7 +4659,7 @@ An important rule of thumb in reducing vulnerability to DoS attacks is to
minimize the amount of resources a potential, but as yet unauthenticated,
client is able to consume.
-.B \-\-tls-auth
+.B \-\-tls\-auth
does this by signing every TLS control channel packet with an HMAC signature,
including packets which are sent before the TLS level has had a chance
to authenticate the peer.
@@ -4667,15 +4667,15 @@ The result is that packets without
the correct signature can be dropped immediately upon reception,
before they have a chance to consume additional system resources
such as by initiating a TLS handshake.
-.B \-\-tls-auth
+.B \-\-tls\-auth
can be strengthened by adding the
-.B \-\-replay-persist
+.B \-\-replay\-persist
option which will keep OpenVPN's replay protection state
in a file so that it is not lost across restarts.
It should be emphasized that this feature is optional and that the
passphrase/key file used with
-.B \-\-tls-auth
+.B \-\-tls\-auth
gives a peer nothing more than the power to initiate a TLS
handshake. It is not used to encrypt or authenticate any tunnel data.
.\"*********************************************************
@@ -4693,7 +4693,7 @@ daemon is started you must be there to type the password. The
option allows you to start OpenVPN from the command line. It will
query you for a password before it daemonizes. To protect a private
key with a password you should omit the
-.B -nodes
+.B \-nodes
option when you use the
.B openssl
command line tool to manage certificates and private keys.
@@ -4706,15 +4706,15 @@ Keep in mind that storing your password in a file
to a certain extent invalidates the extra security provided by
using an encrypted key (Note: OpenVPN
will only read passwords from a file if it has been built
-with the \-\-enable-password-save configure option, or on Windows
+with the \-\-enable\-password\-save configure option, or on Windows
by defining ENABLE_PASSWORD_SAVE in win/settings.in).
.\"*********************************************************
.TP
-.B \-\-auth-nocache
+.B \-\-auth\-nocache
Don't cache
.B \-\-askpass
or
-.B \-\-auth-user-pass
+.B \-\-auth\-user\-pass
username/passwords in virtual memory.
If specified, this directive will cause OpenVPN to immediately
@@ -4724,19 +4724,19 @@ from stdin, which may be multiple times during the duration of an
OpenVPN session.
This directive does not affect the
-.B \-\-http-proxy
+.B \-\-http\-proxy
username/password. It is always cached.
.\"*********************************************************
.TP
-.B \-\-tls-verify cmd
+.B \-\-tls\-verify cmd
Run command
.B cmd
to verify the X509 name of a
pending TLS connection that has otherwise passed all other
tests of certification (except for revocation via
-.B \-\-crl-verify
+.B \-\-crl\-verify
directive; the revocation test occurs after the
-.B \-\-tls-verify
+.B \-\-tls\-verify
test).
.B cmd
@@ -4773,24 +4773,24 @@ See the "Environmental Variables" section below for
additional parameters passed as environmental variables.
.\"*********************************************************
.TP
-.B \-\-tls-export-cert directory
+.B \-\-tls\-export\-cert directory
Store the certificates the clients uses upon connection to this
-directory. This will be done before \-\-tls-verify is called. The
+directory. This will be done before \-\-tls\-verify is called. The
certificates will use a temporary name and will be deleted when
the tls-verify script returns. The file name used for the certificate
is available via the peer_cert environment variable.
.\"*********************************************************
.TP
-.B \-\-x509-username-field [ext:\]fieldname
+.B \-\-x509\-username\-field [ext:\]fieldname
Field in the X.509 certificate subject to be used as the username (default=CN).
Typically, this option is specified with
.B fieldname
as either of the following:
-.B \-\-x509-username-field
+.B \-\-x509\-username\-field
emailAddress
.br
-.B \-\-x509-username-field ext:\fRsubjectAltName
+.B \-\-x509\-username\-field ext:\fRsubjectAltName
The first example uses the value of the "emailAddress" attribute in the
certificate's Subject field as the username. The second example uses
@@ -4805,7 +4805,7 @@ in
the last occurrence is chosen.
When this option is used, the
-.B \-\-verify-x509-name
+.B \-\-verify\-x509\-name
option will match against the chosen
.B fieldname
instead of the Common Name.
@@ -4821,7 +4821,7 @@ prefix will be left as-is. This automatic upcasing feature
is deprecated and will be removed in a future release.
.\"*********************************************************
.TP
-.B \-\-tls-remote name (DEPRECATED)
+.B \-\-tls\-remote name (DEPRECATED)
Accept connections only from a host with X509 name
or common name equal to
.B name.
@@ -4838,18 +4838,18 @@ a third party, such as a commercial web CA.
Name can also be a common name prefix, for example if you
want a client to only accept connections to "Server-1",
"Server-2", etc., you can simply use
-.B \-\-tls-remote Server
+.B \-\-tls\-remote Server
Using a common name prefix is a useful alternative to managing
a CRL (Certificate Revocation List) on the client, since it allows the client
to refuse all certificates except for those associated
with designated servers.
-.B \-\-tls-remote
+.B \-\-tls\-remote
is a useful replacement for the
-.B \-\-tls-verify
+.B \-\-tls\-verify
option to verify the remote host, because
-.B \-\-tls-remote
+.B \-\-tls\-remote
works in a
.B \-\-chroot
environment too.
@@ -4858,13 +4858,13 @@ environment too.
This option is now deprecated. It will be removed either in OpenVPN v2.4
or v2.5. So please make sure you support the new X.509 name formatting
described with the
-.B \-\-compat-names
+.B \-\-compat\-names
option as soon as possible by updating your configurations to use
-.B \-\-verify-x509-name
+.B \-\-verify\-x509\-name
instead.
.\"*********************************************************
.TP
-.B \-\-verify-x509-name name type
+.B \-\-verify\-x509\-name name type
Accept connections only if a host's X.509 name is equal to
.B name.
The remote host must also pass all other tests of verification.
@@ -4876,22 +4876,22 @@ depends on the setting of type.
can be "subject" to match the complete subject DN (default),
"name" to match a subject RDN or "name-prefix" to match a subject RDN prefix.
Which RDN is verified as name depends on the
-.B \-\-x509-username-field
+.B \-\-x509\-username\-field
option. But it defaults to the common name (CN), e.g. a certificate with a
subject DN "C=KG, ST=NA, L=Bishkek, CN=Server-1" would be matched by:
-.B \-\-verify-x509-name 'C=KG, ST=NA, L=Bishkek, CN=Server-1'
+.B \-\-verify\-x509\-name 'C=KG, ST=NA, L=Bishkek, CN=Server-1'
and
-.B \-\-verify-x509-name Server-1 name
+.B \-\-verify\-x509\-name Server-1 name
or you could use
-.B \-\-verify-x509-name Server- name-prefix
+.B \-\-verify\-x509\-name Server- name-prefix
if you want a client to only accept connections to "Server-1", "Server-2", etc.
-.B \-\-verify-x509-name
+.B \-\-verify\-x509\-name
is a useful replacement for the
-.B \-\-tls-verify
+.B \-\-tls\-verify
option to verify the remote host, because
-.B \-\-verify-x509-name
+.B \-\-verify\-x509\-name
works in a
.B \-\-chroot
environment without any dependencies.
@@ -4908,7 +4908,7 @@ Never use this option with type "name-prefix" when your client certificates
are signed by a third party, such as a commercial web CA.
.\"*********************************************************
.TP
-.B \-\-x509-track attribute
+.B \-\-x509\-track attribute
Save peer X509
.B attribute
value in environment for use by plugins and management interface.
@@ -4916,12 +4916,12 @@ Prepend a '+' to
.B attribute
to save values from full cert chain. Values will be encoded
as X509_<depth>_<attribute>=<value>. Multiple
-.B \-\-x509-track
+.B \-\-x509\-track
options can be defined to track multiple attributes.
Not available with PolarSSL.
.\"*********************************************************
.TP
-.B \-\-ns-cert-type client|server
+.B \-\-ns\-cert\-type client|server
Require that peer certificate was signed with an explicit
.B nsCertType
designation of "client" or "server".
@@ -4936,19 +4936,19 @@ field set to "server".
If the server certificate's nsCertType field is set
to "server", then the clients can verify this with
-.B \-\-ns-cert-type server.
+.B \-\-ns\-cert\-type server.
This is an important security precaution to protect against
a man-in-the-middle attack where an authorized client
attempts to connect to another client by impersonating the server.
The attack is easily prevented by having clients verify
the server certificate using any one of
-.B \-\-ns-cert-type, \-\-verify-x509-name,
+.B \-\-ns\-cert\-type, \-\-verify\-x509\-name,
or
-.B \-\-tls-verify.
+.B \-\-tls\-verify.
.\"*********************************************************
.TP
-.B \-\-remote-cert-ku v...
+.B \-\-remote\-cert\-ku v...
Require that peer certificate was signed with an explicit
.B key usage.
@@ -4959,7 +4959,7 @@ The key usage should be encoded in hex, more than one key
usage can be specified.
.\"*********************************************************
.TP
-.B \-\-remote-cert-eku oid
+.B \-\-remote\-cert\-eku oid
Require that peer certificate was signed with an explicit
.B extended key usage.
@@ -4970,7 +4970,7 @@ The extended key usage should be encoded in oid notation, or
OpenSSL symbolic representation.
.\"*********************************************************
.TP
-.B \-\-remote-cert-tls client|server
+.B \-\-remote\-cert\-tls client|server
Require that peer certificate was signed with an explicit
.B key usage
and
@@ -4981,18 +4981,18 @@ This is a useful security option for clients, to ensure that
the host they connect to is a designated server.
The
-.B \-\-remote-cert-tls client
+.B \-\-remote\-cert\-tls client
option is equivalent to
.B
-\-\-remote-cert-ku 80 08 88 \-\-remote-cert-eku "TLS Web Client Authentication"
+\-\-remote\-cert\-ku 80 08 88 \-\-remote\-cert\-eku "TLS Web Client Authentication"
The key usage is digitalSignature and/or keyAgreement.
The
-.B \-\-remote-cert-tls server
+.B \-\-remote\-cert\-tls server
option is equivalent to
.B
-\-\-remote-cert-ku a0 88 \-\-remote-cert-eku "TLS Web Server Authentication"
+\-\-remote\-cert\-ku a0 88 \-\-remote\-cert\-eku "TLS Web Server Authentication"
The key usage is digitalSignature and ( keyEncipherment or keyAgreement ).
@@ -5001,12 +5001,12 @@ a man-in-the-middle attack where an authorized client
attempts to connect to another client by impersonating the server.
The attack is easily prevented by having clients verify
the server certificate using any one of
-.B \-\-remote-cert-tls, \-\-verify-x509-name,
+.B \-\-remote\-cert\-tls, \-\-verify\-x509\-name,
or
-.B \-\-tls-verify.
+.B \-\-tls\-verify.
.\"*********************************************************
.TP
-.B \-\-crl-verify crl ['dir']
+.B \-\-crl\-verify crl ['dir']
Check peer certificate against the file
.B crl
in PEM format.
@@ -5035,34 +5035,34 @@ it will be rejected.
Note: As the crl file (or directory) is read every time a peer connects,
if you are dropping root privileges with
-.B --user,
+.B \-\-user,
make sure that this user has sufficient privileges to read the file.
.\"*********************************************************
.SS SSL Library information:
.\"*********************************************************
.TP
-.B \-\-show-ciphers
+.B \-\-show\-ciphers
(Standalone)
Show all cipher algorithms to use with the
.B \-\-cipher
option.
.\"*********************************************************
.TP
-.B \-\-show-digests
+.B \-\-show\-digests
(Standalone)
Show all message digest algorithms to use with the
.B \-\-auth
option.
.\"*********************************************************
.TP
-.B \-\-show-tls
+.B \-\-show\-tls
(Standalone)
Show all TLS ciphers (TLS used only as a control channel). The TLS
ciphers will be sorted from highest preference (most secure) to
lowest.
.\"*********************************************************
.TP
-.B \-\-show-engines
+.B \-\-show\-engines
(Standalone)
Show currently available hardware-based crypto acceleration
engines supported by the OpenSSL library.
@@ -5121,9 +5121,9 @@ option above).
One disadvantage of persistent tunnels is that it is harder to automatically
configure their MTU value (see
-.B \-\-link-mtu
+.B \-\-link\-mtu
and
-.B \-\-tun-mtu
+.B \-\-tun\-mtu
above).
On some platforms such as Windows, TAP-Win32 tunnels are persistent by
@@ -5149,7 +5149,7 @@ Optional group to be owner of this tunnel.
.SS Windows-Specific Options:
.\"*********************************************************
.TP
-.B \-\-win-sys path
+.B \-\-win\-sys path
Set the Windows system directory pathname to use when looking for system
executables such as
.B route.exe
@@ -5160,7 +5160,7 @@ not specified, OpenVPN will use the SystemRoot environment variable.
This option have changed behaviour in OpenVPN 2.3. Earlier you had to
define
-.B --win-sys env
+.B \-\-win\-sys env
to use the SystemRoot environment variable, otherwise it defaulted to C:\\WINDOWS.
It is not needed to use the
.B env
@@ -5168,7 +5168,7 @@ keyword any more, and it will just be ignored. A warning is logged when this
is found in the configuration file.
.\"*********************************************************
.TP
-.B \-\-ip-win32 method
+.B \-\-ip\-win32 method
When using
.B \-\-ifconfig
on Windows, set the TAP-Win32 adapter
@@ -5177,14 +5177,14 @@ IP address and netmask using
Don't use this option unless you are also using
.B \-\-ifconfig.
-.B manual \-\-
+.B manual --
Don't set the IP address or netmask automatically.
Instead output a message
to the console telling the user to configure the
adapter manually and indicating the IP/netmask which
OpenVPN expects the adapter to be set to.
-.B dynamic [offset] [lease-time] \-\-
+.B dynamic [offset] [lease-time] --
Automatically set the IP address and netmask by replying to
DHCP query messages generated by the kernel. This mode is
probably the "cleanest" solution
@@ -5222,13 +5222,13 @@ because it prevents routes involving the TAP-Win32 adapter from
being lost when the system goes to sleep. The default
lease time is one year.
-.B netsh \-\-
+.B netsh --
Automatically set the IP address and netmask using
the Windows command-line "netsh"
command. This method appears to work correctly on
Windows XP but not Windows 2000.
-.B ipapi \-\-
+.B ipapi --
Automatically set the IP address and netmask using the
Windows IP Helper API. This approach
does not have ideal semantics, though testing has indicated
@@ -5237,7 +5237,7 @@ it is best to leave the TCP/IP properties for the TAP-Win32
adapter in their default state, i.e. "Obtain an IP address
automatically."
-.B adaptive \-\-
+.B adaptive --
(Default) Try
.B dynamic
method initially and fail over to
@@ -5267,55 +5267,55 @@ mode to restore the TAP-Win32 adapter TCP/IP properties
to a DHCP configuration.
.\"*********************************************************
.TP
-.B \-\-route-method m
+.B \-\-route\-method m
Which method
.B m
to use for adding routes on Windows?
.B adaptive
-(default) \-\- Try IP helper API first. If that fails, fall
+(default) -- Try IP helper API first. If that fails, fall
back to the route.exe shell command.
.br
.B ipapi
-\-\- Use IP helper API.
+-- Use IP helper API.
.br
.B exe
-\-\- Call the route.exe shell command.
+-- Call the route.exe shell command.
.\"*********************************************************
.TP
-.B \-\-dhcp-option type [parm]
+.B \-\-dhcp\-option type [parm]
Set extended TAP-Win32 TCP/IP properties, must
be used with
-.B \-\-ip-win32 dynamic
+.B \-\-ip\-win32 dynamic
or
-.B \-\-ip-win32 adaptive.
+.B \-\-ip\-win32 adaptive.
This option can be used to set additional TCP/IP properties
on the TAP-Win32 adapter, and is particularly useful for
configuring an OpenVPN client to access a Samba server
across the VPN.
-.B DOMAIN name \-\-
+.B DOMAIN name --
Set Connection-specific DNS Suffix.
-.B DNS addr \-\-
+.B DNS addr --
Set primary domain name server address. Repeat
this option to set secondary DNS server addresses.
-.B WINS addr \-\-
+.B WINS addr --
Set primary WINS server address (NetBIOS over TCP/IP Name Server).
Repeat this option to set secondary WINS server addresses.
-.B NBDD addr \-\-
+.B NBDD addr --
Set primary NBDD server address (NetBIOS over TCP/IP Datagram Distribution Server)
Repeat this option
to set secondary NBDD server addresses.
-.B NTP addr \-\-
+.B NTP addr --
Set primary NTP server address (Network Time Protocol).
Repeat this option
to set secondary NTP server addresses.
-.B NBT type \-\-
+.B NBT type --
Set NetBIOS over TCP/IP Node type. Possible options:
.B 1
= b-node (broadcasts),
@@ -5328,7 +5328,7 @@ then query name server), and
.B 8
= h-node (query name server, then broadcast).
-.B NBS scope-id \-\-
+.B NBS scope-id --
Set NetBIOS over TCP/IP Scope. A NetBIOS Scope ID provides an extended
naming service for the NetBIOS over TCP/IP (Known as NBT) module. The
primary purpose of a NetBIOS scope ID is to isolate NetBIOS traffic on
@@ -5340,11 +5340,11 @@ computers to use the same computer name, as they have different
scope IDs. The Scope ID becomes a part of the NetBIOS name, making the name unique.
(This description of NetBIOS scopes courtesy of NeonSurge@abyss.com)
-.B DISABLE-NBT \-\-
+.B DISABLE-NBT --
Disable Netbios-over-TCP/IP.
Note that if
-.B \-\-dhcp-option
+.B \-\-dhcp\-option
is pushed via
.B \-\-push
to a non-windows client, the option will be saved in the client's
@@ -5352,7 +5352,7 @@ environment before the up script is called, under
the name "foreign_option_{n}".
.\"*********************************************************
.TP
-.B \-\-tap-sleep n
+.B \-\-tap\-sleep n
Cause OpenVPN to sleep for
.B n
seconds immediately after the TAP-Win32 adapter state
@@ -5362,19 +5362,19 @@ This option is intended to be used to troubleshoot problems
with the
.B \-\-ifconfig
and
-.B \-\-ip-win32
+.B \-\-ip\-win32
options, and is used to give
the TAP-Win32 adapter time to come up before
Windows IP Helper API operations are applied to it.
.\"*********************************************************
.TP
-.B \-\-show-net-up
+.B \-\-show\-net\-up
Output OpenVPN's view of the system routing table and network
adapter list to the syslog or log file after the TUN/TAP adapter
has been brought up and any routes have been added.
.\"*********************************************************
.TP
-.B \-\-dhcp-renew
+.B \-\-dhcp\-renew
Ask Windows to renew the TAP adapter lease on startup.
This option is normally unnecessary, as Windows automatically
triggers a DHCP renegotiation on the TAP adapter when it
@@ -5383,28 +5383,28 @@ Media Status property to "Always Connected", you may need this
flag.
.\"*********************************************************
.TP
-.B \-\-dhcp-release
+.B \-\-dhcp\-release
Ask Windows to release the TAP adapter lease on shutdown.
This option has the same caveats as
-.B \-\-dhcp-renew
+.B \-\-dhcp\-renew
above.
.\"*********************************************************
.TP
-.B \-\-register-dns
+.B \-\-register\-dns
Run net stop dnscache, net start dnscache, ipconfig /flushdns
and ipconfig /registerdns on connection initiation.
This is known to kick Windows into
recognizing pushed DNS servers.
.\"*********************************************************
.TP
-.B \-\-pause-exit
+.B \-\-pause\-exit
Put up a "press any key to continue" message on the console prior
to OpenVPN program exit. This option is automatically used by the
Windows explorer when OpenVPN is run on a configuration
file using the right-click explorer menu.
.\"*********************************************************
.TP
-.B \-\-service exit-event [0|1]
+.B \-\-service exit\-event [0|1]
Should be used when OpenVPN is being automatically executed by another
program in such
a context that no interaction with the user via display or keyboard
@@ -5433,20 +5433,20 @@ window to output status/error
messages, therefore it is useful to use
.B \-\-log
or
-.B \-\-log-append
+.B \-\-log\-append
to write these messages to a file.
.\"*********************************************************
.TP
-.B \-\-show-adapters
+.B \-\-show\-adapters
(Standalone)
Show available TAP-Win32 adapters which can be selected using the
-.B \-\-dev-node
+.B \-\-dev\-node
option. On non-Windows systems, the
.BR ifconfig (8)
command provides similar functionality.
.\"*********************************************************
.TP
-.B \-\-allow-nonadmin [TAP-adapter]
+.B \-\-allow\-nonadmin [TAP-adapter]
(Standalone)
Set
.B TAP-adapter
@@ -5461,7 +5461,7 @@ and reloaded.
This directive can only be used by an administrator.
.\"*********************************************************
.TP
-.B \-\-show-valid-subnets
+.B \-\-show\-valid\-subnets
(Standalone)
Show valid subnets for
.B \-\-dev tun
@@ -5474,7 +5474,7 @@ Namely, the point-to-point endpoints used in TUN device emulation
must be the middle two addresses of a /30 subnet (netmask 255.255.255.252).
.\"*********************************************************
.TP
-.B \-\-show-net
+.B \-\-show\-net
(Standalone)
Show OpenVPN's view of the system routing table and network
adapter list.
@@ -5482,7 +5482,7 @@ adapter list.
.SS PKCS#11 Standalone Options:
.\"*********************************************************
.TP
-.B \-\-show-pkcs11-ids [provider] [cert_private]
+.B \-\-show\-pkcs11\-ids [provider] [cert_private]
(Standalone)
Show PKCS#11 token object list. Specify cert_private as 1
if certificates are stored as private objects.
@@ -5505,26 +5505,26 @@ as well (except for
.B \-\-topology
, which has no effect on IPv6).
.TP
-.B --ifconfig-ipv6 ipv6addr/bits ipv6remote
+.B \-\-ifconfig\-ipv6 ipv6addr/bits ipv6remote
configure IPv6 address
.B ipv6addr/bits
on the ``tun'' device. The second parameter is used as route target for
-.B --route-ipv6
+.B \-\-route\-ipv6
if no gateway is specified.
.TP
-.B --route-ipv6 ipv6addr/bits [gateway] [metric]
+.B \-\-route\-ipv6 ipv6addr/bits [gateway] [metric]
setup IPv6 routing in the system to send the specified IPv6 network
into OpenVPN's ``tun'' device
.TP
-.B --server-ipv6 ipv6addr/bits
+.B \-\-server\-ipv6 ipv6addr/bits
convenience-function to enable a number of IPv6 related options at
once, namely
-.B --ifconfig-ipv6, --ifconfig-ipv6-pool, --tun-ipv6
+.B \-\-ifconfig\-ipv6, \-\-ifconfig\-ipv6\-pool, \-\-tun\-ipv6
and
-.B --push tun-ipv6
-Is only accepted if ``--mode server'' or ``--server'' is set.
+.B \-\-push tun\-ipv6
+Is only accepted if ``\-\-mode server'' or ``\-\-server'' is set.
.TP
-.B --ifconfig-ipv6-pool ipv6addr/bits
+.B \-\-ifconfig\-ipv6\-pool ipv6addr/bits
Specify an IPv6 address pool for dynamic assignment to clients. The
pool starts at
.B ipv6addr
@@ -5533,20 +5533,20 @@ and increments by +1 for every new client (linear mode). The
setting controls the size of the pool. Due to implementation details,
the pool size must be between /64 and /112.
.TP
-.B --ifconfig-ipv6-push ipv6addr/bits ipv6remote
+.B \-\-ifconfig\-ipv6\-push ipv6addr/bits ipv6remote
for ccd/ per-client static IPv6 interface configuration, see
-.B --client-config-dir
+.B \-\-client\-config\-dir
and
-.B --ifconfig-push
+.B \-\-ifconfig\-push
for more details.
.TP
-.B --iroute-ipv6 ipv6addr/bits
+.B \-\-iroute\-ipv6 ipv6addr/bits
for ccd/ per-client static IPv6 route configuration, see
-.B --iroute
+.B \-\-iroute
for more details how to setup and use this, and how
-.B --iroute
+.B \-\-iroute
and
-.B --route
+.B \-\-route
interact.
.\"*********************************************************
@@ -5561,7 +5561,7 @@ of environmental variables for use by user-defined scripts.
Executed after TCP/UDP socket bind and TUN/TAP open.
.\"*********************************************************
.TP
-.B \-\-tls-verify
+.B \-\-tls\-verify
Executed when we have a still untrusted remote peer.
.\"*********************************************************
.TP
@@ -5569,25 +5569,25 @@ Executed when we have a still untrusted remote peer.
Executed after connection authentication, or remote IP address change.
.\"*********************************************************
.TP
-.B \-\-client-connect
+.B \-\-client\-connect
Executed in
.B \-\-mode server
mode immediately after client authentication.
.\"*********************************************************
.TP
-.B \-\-route-up
+.B \-\-route\-up
Executed after connection authentication, either
immediately after, or some number of seconds after
as defined by the
-.B \-\-route-delay
+.B \-\-route\-delay
option.
.\"*********************************************************
.TP
-.B \-\-route-pre-down
+.B \-\-route\-pre\-down
Executed right before the routes are removed.
.\"*********************************************************
.TP
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
Executed in
.B \-\-mode server
mode on client instance shutdown.
@@ -5597,14 +5597,14 @@ mode on client instance shutdown.
Executed after TCP/UDP and TUN/TAP close.
.\"*********************************************************
.TP
-.B \-\-learn-address
+.B \-\-learn\-address
Executed in
.B \-\-mode server
mode whenever an IPv4 address/route or MAC address is added to OpenVPN's
internal routing table.
.\"*********************************************************
.TP
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
Executed in
.B \-\-mode server
mode on new client connections, when the client is
@@ -5630,7 +5630,7 @@ Can string remapping be disabled?
.B A:
Yes, by using the
-.B \-\-no-name-remapping
+.B \-\-no\-name\-remapping
option, however this should be considered an advanced option.
Here is a brief rundown of OpenVPN's current string types and the
@@ -5646,17 +5646,17 @@ true.
Alphanumeric, underbar ('_'), dash ('-'), dot ('.'), and at
('@').
-.B \-\-auth-user-pass username:
+.B \-\-auth\-user\-pass username:
Same as Common Name, with one exception: starting with OpenVPN 2.0.1,
the username is passed to the OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY plugin in its raw form,
without string remapping.
-.B \-\-auth-user-pass password:
+.B \-\-auth\-user\-pass password:
Any "printable" character except CR or LF.
Printable is defined to be a character which will cause the C library
isprint() function to return true.
-.B \-\-client-config-dir filename as derived from common name or username:
+.B \-\-client\-config\-dir filename as derived from common name or username:
Alphanumeric, underbar ('_'), dash ('-'), and dot ('.') except for "." or
".." as standalone strings. As of 2.0.1-rc6, the at ('@') character has
been added as well for compatibility with the common name character class.
@@ -5686,23 +5686,23 @@ which refer to different client instances.
.B bytes_received
Total number of bytes received from client during VPN session.
Set prior to execution of the
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
script.
.\"*********************************************************
.TP
.B bytes_sent
Total number of bytes sent to client during VPN session.
Set prior to execution of the
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
script.
.\"*********************************************************
.TP
.B common_name
The X509 common name of an authenticated client.
Set prior to execution of
-.B \-\-client-connect, \-\-client-disconnect,
+.B \-\-client\-connect, \-\-client\-disconnect,
and
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
scripts.
.\"*********************************************************
.TP
@@ -5724,7 +5724,7 @@ Set on program initiation and reset on SIGHUP.
Set to "1" if the
.B \-\-log
or
-.B \-\-log-append
+.B \-\-log\-append
directives are specified, or "0" otherwise.
Set on program initiation and reset on SIGHUP.
.\"*********************************************************
@@ -5744,7 +5744,7 @@ An option pushed via
.B \-\-push
to a client which does not natively support it,
such as
-.B \-\-dhcp-option
+.B \-\-dhcp\-option
on a non-Windows system, will be recorded to this
environmental variable sequence prior to
.B \-\-up
@@ -5770,7 +5770,7 @@ script execution.
.TP
.B ifconfig_ipv6_local
The local VPN endpoint IPv6 address specified in the
-.B \-\-ifconfig-ipv6
+.B \-\-ifconfig\-ipv6
option (first parameter).
Set prior to OpenVPN calling the
.I ifconfig
@@ -5785,7 +5785,7 @@ script execution.
.B ifconfig_ipv6_netbits
The prefix length of the IPv6 network on the VPN interface. Derived from
the /nnn parameter of the IPv6 address in the
-.B \-\-ifconfig-ipv6
+.B \-\-ifconfig\-ipv6
option (first parameter).
Set prior to OpenVPN calling the
.I ifconfig
@@ -5799,7 +5799,7 @@ script execution.
.TP
.B ifconfig_ipv6_remote
The remote VPN endpoint IPv6 address specified in the
-.B \-\-ifconfig-ipv6
+.B \-\-ifconfig\-ipv6
option (second parameter).
Set prior to OpenVPN calling the
.I ifconfig
@@ -5861,54 +5861,54 @@ script execution.
.B ifconfig_pool_local_ip
The local
virtual IP address for the TUN/TAP tunnel taken from an
-.B \-\-ifconfig-push
+.B \-\-ifconfig\-push
directive if specified, or otherwise from
the ifconfig pool (controlled by the
-.B \-\-ifconfig-pool
+.B \-\-ifconfig\-pool
config file directive).
Only set for
.B \-\-dev tun
tunnels.
This option is set on the server prior to execution
of the
-.B \-\-client-connect
+.B \-\-client\-connect
and
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
scripts.
.\"*********************************************************
.TP
.B ifconfig_pool_netmask
The
virtual IP netmask for the TUN/TAP tunnel taken from an
-.B \-\-ifconfig-push
+.B \-\-ifconfig\-push
directive if specified, or otherwise from
the ifconfig pool (controlled by the
-.B \-\-ifconfig-pool
+.B \-\-ifconfig\-pool
config file directive).
Only set for
.B \-\-dev tap
tunnels.
This option is set on the server prior to execution
of the
-.B \-\-client-connect
+.B \-\-client\-connect
and
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
scripts.
.\"*********************************************************
.TP
.B ifconfig_pool_remote_ip
The remote
virtual IP address for the TUN/TAP tunnel taken from an
-.B \-\-ifconfig-push
+.B \-\-ifconfig\-push
directive if specified, or otherwise from
the ifconfig pool (controlled by the
-.B \-\-ifconfig-pool
+.B \-\-ifconfig\-pool
config file directive).
This option is set on the server prior to execution
of the
-.B \-\-client-connect
+.B \-\-client\-connect
and
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
scripts.
.\"*********************************************************
.TP
@@ -5940,7 +5940,7 @@ Set on program initiation and reset on SIGHUP.
.B password
The password provided by a connecting client.
Set prior to
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
script execution only when the
.B via-env
modifier is specified, and deleted from the environment
@@ -5981,7 +5981,7 @@ script execution.
The default gateway used by
.B \-\-route
options, as specified in either the
-.B \-\-route-gateway
+.B \-\-route\-gateway
option or the second parameter to
.B \-\-ifconfig
when
@@ -6032,7 +6032,7 @@ or configuration file.
.TP
.B peer_cert
Temporary file name containing the client certificate upon
-connection. Useful in conjunction with --tls-verify
+connection. Useful in conjunction with \-\-tls\-verify
.\"*********************************************************
.TP
.B script_context
@@ -6060,11 +6060,11 @@ The reason for exit or restart. Can be one of
option),
.B ping-exit
(controlled by
-.B \-\-ping-exit
+.B \-\-ping\-exit
option),
.B ping-restart
(controlled by
-.B \-\-ping-restart
+.B \-\-ping\-restart
option),
.B connection-reset
(triggered on TCP connection reset),
@@ -6078,7 +6078,7 @@ or
Client connection timestamp, formatted as a human-readable
time string.
Set prior to execution of the
-.B \-\-client-connect
+.B \-\-client\-connect
script.
.\"*********************************************************
.TP
@@ -6086,7 +6086,7 @@ script.
The duration (in seconds) of the client session which is now
disconnecting.
Set prior to execution of the
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
script.
.\"*********************************************************
.TP
@@ -6094,7 +6094,7 @@ script.
Client connection timestamp, formatted as a unix integer
date/time value.
Set prior to execution of the
-.B \-\-client-connect
+.B \-\-client\-connect
script.
.\"*********************************************************
.TP
@@ -6104,7 +6104,7 @@ where
.B n
is the verification level. Only set for TLS connections. Set prior
to execution of
-.B \-\-tls-verify
+.B \-\-tls\-verify
script.
.\"*********************************************************
.TP
@@ -6114,7 +6114,7 @@ where
.B n
is the verification level. Only set for TLS connections. Set prior
to execution of
-.B \-\-tls-verify
+.B \-\-tls\-verify
script.
.\"*********************************************************
.TP
@@ -6124,7 +6124,7 @@ where
.B n
is the verification level. Only set for TLS connections. Set prior
to execution of
-.B \-\-tls-verify
+.B \-\-tls\-verify
script. This is in the form of a decimal string like "933971680", which is
suitable for doing serial-based OCSP queries (with OpenSSL, do not
prepend "0x" to the string) If something goes wrong while reading
@@ -6151,9 +6151,9 @@ script execution.
.B trusted_ip (or trusted_ip6)
Actual IP address of connecting client or peer which has been authenticated.
Set prior to execution of
-.B \-\-ipchange, \-\-client-connect,
+.B \-\-ipchange, \-\-client\-connect,
and
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
scripts.
If using ipv6 endpoints (udp6, tcp6),
.B trusted_ip6
@@ -6163,9 +6163,9 @@ will be set instead.
.B trusted_port
Actual port number of connecting client or peer which has been authenticated.
Set prior to execution of
-.B \-\-ipchange, \-\-client-connect,
+.B \-\-ipchange, \-\-client\-connect,
and
-.B \-\-client-disconnect
+.B \-\-client\-disconnect
scripts.
.\"*********************************************************
.TP
@@ -6174,12 +6174,12 @@ Actual IP address of connecting client or peer which has not been authenticated
yet. Sometimes used to
.B nmap
the connecting host in a
-.B \-\-tls-verify
+.B \-\-tls\-verify
script to ensure it is firewalled properly.
Set prior to execution of
-.B \-\-tls-verify
+.B \-\-tls\-verify
and
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
scripts.
If using ipv6 endpoints (udp6, tcp6),
.B untrusted_ip6
@@ -6190,16 +6190,16 @@ will be set instead.
Actual port number of connecting client or peer which has not been authenticated
yet.
Set prior to execution of
-.B \-\-tls-verify
+.B \-\-tls\-verify
and
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
scripts.
.\"*********************************************************
.TP
.B username
The username provided by a connecting client.
Set prior to
-.B \-\-auth-user-pass-verify
+.B \-\-auth\-user\-pass\-verify
script execution only when the
.B via-env
modifier is specified.
@@ -6211,7 +6211,7 @@ where
.B n
is the verification level. Only set for TLS connections. Set prior
to execution of
-.B \-\-tls-verify
+.B \-\-tls\-verify
script. This variable is similar to
.B tls_id_{n}
except the component X509 subject fields are broken out, and
@@ -6242,9 +6242,9 @@ X509_1_C=KG
.\"*********************************************************
.SH INLINE FILE SUPPORT
OpenVPN allows including files in the main configuration for the
-.B \-\-ca, \-\-cert, \-\-dh, \-\-extra-certs, \-\-key, \-\-pkcs12, \-\-secret
+.B \-\-ca, \-\-cert, \-\-dh, \-\-extra\-certs, \-\-key, \-\-pkcs12, \-\-secret
and
-.B \-\-tls-auth
+.B \-\-tls\-auth
options.
Each inline file started by the line
@@ -6269,7 +6269,7 @@ Here is an example of an inline file usage
When using the inline file feature with
.B \-\-pkcs12
the inline file has to be base64 encoded. Encoding of a .p12 file into base64 can be done for example with OpenSSL by running
-.B openssl base64 -in input.p12
+.B openssl base64 \-in input.p12
.SH SIGNALS
.TP
@@ -6286,18 +6286,18 @@ Like
except don't re-read configuration file, and possibly don't close and reopen TUN/TAP
device, re-read key files, preserve local IP address/port, or preserve most recently authenticated
remote IP address/port based on
-.B \-\-persist-tun, \-\-persist-key, \-\-persist-local-ip,
+.B \-\-persist\-tun, \-\-persist\-key, \-\-persist\-local\-ip,
and
-.B \-\-persist-remote-ip
+.B \-\-persist\-remote\-ip
options respectively (see above).
This signal may also be internally generated by a timeout condition, governed
by the
-.B \-\-ping-restart
+.B \-\-ping\-restart
option.
This signal, when combined with
-.B \-\-persist-remote-ip,
+.B \-\-persist\-remote\-ip,
may be
sent when the underlying parameters of the host's network interface change
such as when the host is a DHCP client and is assigned a new IP address.
@@ -6367,7 +6367,7 @@ without an explicit firewall rule).
If you are using a Linux iptables-based firewall, you may need to enter
the following command to allow incoming packets on the TUN device:
.IP
-.B iptables -A INPUT -i tun+ -j ACCEPT
+.B iptables \-A INPUT \-i tun+ \-j ACCEPT
.LP
See the firewalls section below for more information on configuring firewalls
for use with OpenVPN.
@@ -6508,11 +6508,11 @@ parameters you can use the included file dh1024.pem.
.LP
On may:
.IP
-.B openvpn \-\-remote june.kg \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-tls-client \-\-ca ca.crt \-\-cert client.crt \-\-key client.key \-\-reneg-sec 60 \-\-verb 5
+.B openvpn \-\-remote june.kg \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-tls\-client \-\-ca ca.crt \-\-cert client.crt \-\-key client.key \-\-reneg\-sec 60 \-\-verb 5
.LP
On june:
.IP
-.B openvpn \-\-remote may.kg \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-tls-server \-\-dh dh1024.pem \-\-ca ca.crt \-\-cert server.crt \-\-key server.key \-\-reneg-sec 60 \-\-verb 5
+.B openvpn \-\-remote may.kg \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-tls\-server \-\-dh dh1024.pem \-\-ca ca.crt \-\-cert server.crt \-\-key server.key \-\-reneg\-sec 60 \-\-verb 5
.LP
Now verify the tunnel is working by pinging across the tunnel.
.LP
@@ -6525,7 +6525,7 @@ On june:
.B ping 10.4.0.1
.LP
Notice the
-.B \-\-reneg-sec 60
+.B \-\-reneg\-sec 60
option we used above. That tells OpenVPN to renegotiate
the data channel keys every minute.
Since we used
@@ -6534,7 +6534,7 @@ above, you will see status information on each new key negotiation.
For production operations, a key renegotiation interval of 60 seconds
is probably too frequent. Omit the
-.B \-\-reneg-sec 60
+.B \-\-reneg\-sec 60
option to use OpenVPN's default key renegotiation interval of one hour.
.\"*********************************************************
.SS Routing:
@@ -6554,15 +6554,15 @@ On Linux, enable routing:
.LP
and enable TUN packet forwarding through the firewall:
.IP
-.B iptables -A FORWARD -i tun+ -j ACCEPT
+.B iptables \-A FORWARD \-i tun+ \-j ACCEPT
.LP
On may:
.IP
-.B route add -net 10.0.1.0 netmask 255.255.255.0 gw 10.4.0.2
+.B route add \-net 10.0.1.0 netmask 255.255.255.0 gw 10.4.0.2
.LP
On june:
.IP
-.B route add -net 10.0.0.0 netmask 255.255.255.0 gw 10.4.0.1
+.B route add \-net 10.0.0.0 netmask 255.255.255.0 gw 10.4.0.1
.LP
Now any machine on the 10.0.0.0/24 subnet can
access any machine on the 10.0.1.0/24 subnet
@@ -6578,7 +6578,7 @@ OpenVPN's usage of a single UDP port makes it fairly firewall-friendly.
You should add an entry to your firewall rules to allow incoming OpenVPN
packets. On Linux 2.4+:
.IP
-.B iptables -A INPUT -p udp -s 1.2.3.4 \-\-dport 1194 -j ACCEPT
+.B iptables \-A INPUT \-p udp \-s 1.2.3.4 \-\-dport 1194 \-j ACCEPT
.LP
This will allow incoming packets on UDP port 1194 (OpenVPN's default UDP port)
from an OpenVPN peer at 1.2.3.4.
@@ -6589,7 +6589,7 @@ address can be considered optional, since HMAC packet authentication
is a much more secure method of verifying the authenticity of
a packet source. In that case:
.IP
-.B iptables -A INPUT -p udp \-\-dport 1194 -j ACCEPT
+.B iptables \-A INPUT \-p udp \-\-dport 1194 \-j ACCEPT
.LP
would be adequate and would not render the host inflexible with
respect to its peer having a dynamic IP address.
@@ -6611,20 +6611,20 @@ firewall rules.
You should also add firewall rules to allow incoming IP traffic on
TUN or TAP devices such as:
.IP
-.B iptables -A INPUT -i tun+ -j ACCEPT
+.B iptables \-A INPUT \-i tun+ \-j ACCEPT
.LP
to allow input packets from tun devices,
.IP
-.B iptables -A FORWARD -i tun+ -j ACCEPT
+.B iptables \-A FORWARD \-i tun+ \-j ACCEPT
.LP
to allow input packets from tun devices to be forwarded to
other hosts on the local network,
.IP
-.B iptables -A INPUT -i tap+ -j ACCEPT
+.B iptables \-A INPUT \-i tap+ \-j ACCEPT
.LP
to allow input packets from tap devices, and
.IP
-.B iptables -A FORWARD -i tap+ -j ACCEPT
+.B iptables \-A FORWARD \-i tap+ \-j ACCEPT
.LP
to allow input packets from tap devices to be forwarded to
other hosts on the local network.