/*
 * mdctl - manage Linux "md" devices aka RAID arrays.
 *
 * Copyright (C) 2001 Neil Brown <neilb@cse.unsw.edu.au>
 *
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; either version 2 of the License, or
 *    (at your option) any later version.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *    GNU General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License
 *    along with this program; if not, write to the Free Software
 *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 *    Author: Neil Brown
 *    Email: <neilb@cse.unsw.edu.au>
 *    Paper: Neil Brown
 *           School of Computer Science and Engineering
 *           The University of New South Wales
 *           Sydney, 2052
 *           Australia
 */

#include "mdctl.h"
#include	"md_u.h"
#include	"md_p.h"

int Create(char *mddev, int mdfd,
	   int chunk, int level, int layout, int size, int raiddisks, int sparedisks,
	   int subdevs, char *subdev[],
	   int runstop, int verbose)
{
	/*
	 * Create a new raid array.
	 *
	 * First check that necessary details are available
	 * (i.e. level, raid-disks)
	 *
	 * Then check each disk to see what might be on it
	 * and report anything interesting.
	 *
	 * If anything looks odd, and runstop not set,
	 * abort.
	 *
	 * SET_ARRAY_INFO and ADD_NEW_DISK, and
	 * if runstop==run, or raiddisks diskswere used,
	 * RUN_ARRAY
	 */
	int minsize, maxsize;
	int maxdisc= -1, mindisc = -1;
	int i;
	int fail=0, warn=0;

	mdu_array_info_t array;
	mdu_param_t param;
	

	if (md_get_version(mdfd) < 9000) {
	    fprintf(stderr, Name ": Create requires md driver verison 0.90.0 or later\n");
	    return 1;
	}
	if (level == -10) {
		fprintf(stderr,
			Name ": a RAID level is needed to create an array.\n");
		return 1;
	}
	if (raiddisks < 1) {
		fprintf(stderr,
			Name ": a number of --raid-disks must be given to create an array\n");
		return 1;
	}
	if (raiddisks+sparedisks > MD_SB_DISKS) {
		fprintf(stderr,
			Name ": too many discs requested: %d+%d > %d\n",
			raiddisks, sparedisks, MD_SB_DISKS);
		return 1;
	}
	if (subdevs > raiddisks+sparedisks) {
	    fprintf(stderr, Name ": You have listed more disks (%d) than are in the array(%d)!\n", subdevs, raiddisks+sparedisks);
	    return 1;
	}
	/* now set some defaults */
	if (layout == -1)
		switch(level) {
		default: /* no layout */
			layout = 0;
			break;
		case 5:
			layout = map_name(r5layout, "default");
			if (verbose)
				fprintf(stderr,
					Name ": layout defaults to %s\n", map_num(r5layout, layout));
			break;
		}

	if (chunk == 0) {
		chunk = 64;
		if (verbose)
			fprintf(stderr, Name ": chunk size defaults to 64K\n");
	}

	/* now look at the subdevs */
	for (i=0; i<subdevs; i++) {
		char *dname = subdev[i];
		int dsize, freesize;
		int fd = open(dname, O_RDONLY, 0);
		if (fd <0 ) {
			fprintf(stderr, Name ": Cannot open %s: %s\n",
				dname, strerror(errno));
			fail=1;
			continue;
		}
		if (ioctl(fd, BLKGETSIZE, &dsize)) {
			fprintf(stderr, Name ": Cannot get size of %s: %s\n",
				dname, strerror(errno));
			fail = 1;
			close(fd);
			continue;
		}
		if (dsize < MD_RESERVED_SECTORS*2) {
		    fprintf(stderr, Name ": %s is too small: %dK\n",
			    dname, dsize/2);
		    fail = 1;
		    close(fd);
		    continue;
		}
		freesize = MD_NEW_SIZE_SECTORS(dsize);
		freesize /= 2;

		if (size && freesize < size) {
		    fprintf(stderr, Name ": %s is smaller that given size."
			    " %dK < %dK + superblock\n", dname, freesize, size);
		    fail = 1;
		    close(fd);
		    continue;
		}
		if (maxdisc< 0 || (maxdisc>=0 && freesize > maxsize)) {
		    maxdisc = i;
		    maxsize = freesize;
		}
		if (mindisc < 0 || (mindisc >=0 && freesize < minsize)) {
		    mindisc = i;
		    minsize = freesize;
		}
		warn |= check_ext2(fd, dname);
		warn |= check_reiser(fd, dname);
		warn |= check_raid(fd, dname);
		close(fd);
	}
	if (fail) {
	    fprintf(stderr, Name ": create aborted\n");
	    return 1;
	}
	if (size == 0) {
	    if (mindisc == -1) {
		fprintf(stderr, Name ": no size and no drives given - aborting create.\n");
		return 1;
	    }
	    size = minsize;
	    if (verbose)
		fprintf(stderr, Name ": size set to %dK\n", size);
	}
	if ((maxsize-size)*100 > maxsize) {
	    fprintf(stderr, Name ": largest drive (%s) exceed size (%dK) by more than 1%\n",
		    subdev[maxdisc], size);
	    warn = 1;
	}

	if (warn) {
	    if (runstop!= 1) {
		if (!ask("Continue creating array? ")) {
		    fprintf(stderr, Name ": create aborted.\n");
		    return 1;
		}
	    } else {
		if (verbose)
		    fprintf(stderr, Name ": creation continuing despite oddities due to --run\n");
	    }
	}

	/* Ok, lets try some ioctls */

	array.level = level;
	array.size = size;
	array.nr_disks = raiddisks+sparedisks;
	array.raid_disks = raiddisks;
	array.md_minor = 0;
	array.not_persistent = 0;
	array.state = 0; /* not clean, but no errors */
	array.active_disks=0;
	array.working_disks=0;
	array.spare_disks=0;
	array.failed_disks=0;
	array.layout = layout;
	array.chunk_size = chunk*1024;

	if (ioctl(mdfd, SET_ARRAY_INFO, &array)) {
	    fprintf(stderr, Name ": SET_ARRAY_INFO failed for %s: %s\n",
		    mddev, strerror(errno));
	    return 1;
	}
	
	for (i=0; i<subdevs; i++) {
	    int fd = open(subdev[i], O_RDONLY, 0);
	    struct stat stb;
	    mdu_disk_info_t disk;
	    if (fd < 0) {
		fprintf(stderr, Name ": failed to open %s after earlier success - aborting\n",
			subdev[i]);
		return 1;
	    }
	    fstat(fd, &stb);
	    disk.number = i;
	    disk.raid_disk = i;
	    disk.state = 6; /* active and in sync */
	    disk.major = MAJOR(stb.st_rdev);
	    disk.minor = MINOR(stb.st_rdev);
	    close(fd);
	    if (ioctl(mdfd, ADD_NEW_DISK, &disk)) {
		fprintf(stderr, Name ": ADD_NEW_DISK for %s failed: %s\b",
			subdev[i], strerror(errno));
		return 1;
	    }
	}

	/* param is not actually used */
	if (runstop == 1 || subdevs >= raiddisks) {
		if (ioctl(mdfd, RUN_ARRAY, &param)) {
			fprintf(stderr, Name ": RUN_ARRAY failed: %s\n",
				strerror(errno));
			return 1;
		}
		fprintf(stderr, Name ": array %s started.\n", mddev);
	} else {
		fprintf(stderr, Name ": not starting array - not enough discs.\n");
	}
	return 0;
}