/* * Copyright (C) 2005 Arabella Software Ltd. * Yuli Barcohen * * Support for Embedded Planet EP88x boards. * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #define CONFIG_MPC885 #define CONFIG_EP88X /* Embedded Planet EP88x board */ #define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ #define CONFIG_ENV_OVERWRITE #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 38400 #define CONFIG_ETHER_ON_FEC1 /* Enable Ethernet on FEC1 */ #define CONFIG_ETHER_ON_FEC2 /* Enable Ethernet on FEC2 */ #if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) #define CFG_DISCOVER_PHY #define FEC_ENET #endif /* CONFIG_FEC_ENET */ #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ #define CONFIG_8xx_CPUCLK_DEFAULT 100000000 #define CFG_8xx_CPUCLK_MIN 40000000 #define CFG_8xx_CPUCLK_MAX 133000000 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_DHCP \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ ) /* This must be included AFTER the definition of CONFIG_COMMANDS */ #include #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:2M(ROM)ro,-(root)" #define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ /*----------------------------------------------------------------------- * Miscellaneous configurable options */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* #undef to save memory */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* Max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x400000 /* Default load address */ #define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * RAM configuration (note that CFG_SDRAM_BASE must be zero) */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_MAX_SIZE 0x08000000 /* Up to 128 Mbyte */ #define CFG_MAMR 0x00805000 /* * 4096 Up to 4096 SDRAM rows * 1000 factor s -> ms * 32 PTP (pre-divider from MPTPR) * 4 Number of refresh cycles per period * 64 Refresh cycle in ms per number of rows */ #define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ #define CFG_RESET_ADDRESS 0x09900000 /*----------------------------------------------------------------------- * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ #ifdef CONFIG_BZIP2 #define CFG_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ #else #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ #endif /* CONFIG_BZIP2 */ /*----------------------------------------------------------------------- * Flash organisation */ #define CFG_FLASH_BASE 0xFC000000 #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ #define CFG_MAX_FLASH_SECT 512 /* Max num of sects on one chip */ /* Environment is in flash */ #define CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x20000 /* We use one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_OR0_PRELIM 0xFC000160 #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V) #define CFG_DIRECT_FLASH_TFTP /*----------------------------------------------------------------------- * BCSR */ #define CFG_OR3_PRELIM 0xFF0005B0 #define CFG_BR3_PRELIM (0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V) #define CFG_BCSR 0xFA400000 /*----------------------------------------------------------------------- * Internal Memory Map Register */ #define CFG_IMMR 0xF0000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR CFG_IMMR #define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ #define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Configuration registers */ #ifdef CONFIG_WATCHDOG #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ SYPCR_SWP) #else #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ SYPCR_SWF | SYPCR_SWP) #endif /* CONFIG_WATCHDOG */ #define CFG_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) /* TBSCR - Time Base Status and Control Register */ #define CFG_TBSCR (TBSCR_TBF | TBSCR_TBE) /* PISCR - Periodic Interrupt Status and Control */ #define CFG_PISCR PISCR_PS /* SCCR - System Clock and reset Control Register */ #define SCCR_MASK SCCR_EBDF11 #define CFG_SCCR SCCR_RTSEL #define CFG_DER 0 /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx chips */ /*----------------------------------------------------------------------- * Internal Definitions * * Boot Flags */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #endif /* __CONFIG_H */ a> 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 
<?xml version="1.0"?>
<api name='libvir-python'>
  <symbols>
    <function name="virConnectGetVersion" file='python'>
      <info>Returns the running hypervisor version of the connection host</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='int' info="0 on success, -1 on error"/>
    </function>
    <function name="virConnectGetLibVersion" file='python'>
      <info>Returns the libvirt version of the connection host</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='int' info="0 on success, -1 on error"/>
    </function>
    <function name="virConnectListDomainsID" file='python'>
      <info>Returns the list of the ID of the domains on the hypervisor</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='int *' info="the list of ID or None in case of error"/>
    </function>
    <function name='virConnectListDefinedDomains' file='python'>
      <info>list the defined domains, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virConnectListAllDomains' file='python'>
      <info>returns list of all defined domains</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='domain *' info='the list of domains or None in case of error'/>
    </function>
    <function name='virConnectListNetworks' file='python'>
      <info>list the networks, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virConnectListDefinedNetworks' file='python'>
      <info>list the defined networks, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virConnectListAllNetworks' file='python'>
      <info>returns list of all networks</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='network *' info='the list of networks or None in case of error'/>
    </function>
    <function name='virDomainLookupByUUID' file='python'>
      <info>Try to lookup a domain on the given hypervisor based on its UUID.</info>
      <return type='virDomainPtr' info='a new domain object or NULL in case of failure'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='uuid' type='const unsigned char *' info='the UUID string for the domain, must be 16 bytes'/>
    </function>
    <function name='virNetworkLookupByUUID' file='python'>
      <info>Try to lookup a network on the given hypervisor based on its UUID.</info>
      <return type='virNetworkPtr' info='a new network object or NULL in case of failure'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='uuid' type='const unsigned char *' info='the UUID string for the network, must be 16 bytes'/>
    </function>
    <function name='virDomainGetInfo' file='python'>
      <info>Extract information about a domain. Note that if the connection used to get the domain is limited only a partial set of the information can be extracted.</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
    </function>
    <function name='virDomainGetState' file='python'>
      <info>Extract domain state.</info>
      <return type='int *' info='the list containing state and reason or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='flags' type='unsigned int' info='additional flags'/>
    </function>
    <function name='virDomainGetControlInfo' file='python'>
      <info>Extract details about current state of control interface to a domain.</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='flags' type='unsigned int' info='additional flags'/>
    </function>
    <function name='virDomainGetBlockInfo' file='python'>
      <info>Extract information about a domain block device size</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='path' type='const char *' info='path to the block device or file'/>
      <arg name='flags' type='unsigned int' info='currently unused'/>
    </function>
    <function name='virDomainGetJobInfo' file='python'>
      <info>Extract information about an active job being processed for a domain.</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
    </function>
    <function name='virNodeGetInfo' file='python'>
      <info>Extract hardware information about the Node.</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
    </function>
    <function name='virNodeGetCPUStats' file='python'>
      <info>Extract node's CPU statistics.</info>
      <return type='virNodeCPUStats' info='dictionary mapping field names to values or None in case of error'/>
      <arg name='conn' type='virConnectPtr' info='pointer to hypervisor connection'/>
      <arg name='cpuNum' type='int' info='number of node cpu. (VIR_NODE_CPU_STATS_ALL_CPUS means total cpu statistics)'/>
      <arg name='flags' type='unsigned int' info='additional flags'/>
    </function>
    <function name='virNodeGetMemoryStats' file='python'>
      <info>Extract node's memory statistics.</info>
      <return type='virNodeMemoryStats' info='dictionary mapping field names to values or None in case of error'/>
      <arg name='conn' type='virConnectPtr' info='pointer to hypervisor connection'/>
      <arg name='cellNum' type='int' info='number of node cell. (VIR_NODE_MEMORY_STATS_ALL_CELLS means total cell statistics)'/>
      <arg name='flags' type='unsigned int' info='additional flags'/>
    </function>
    <function name='virDomainGetUUID' file='python'>
      <info>Extract the UUID unique Identifier of a domain.</info>
      <return type='char *' info='the 16 bytes string or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
    </function>
    <function name='virDomainGetUUIDString' file='python'>
      <info>Fetch globally unique ID of the domain as a string.</info>
      <return type='char *' info='the UUID string or None in case of error'/>
      <arg name='pool' type='virDomainPtr' info='a domain object'/>
    </function>
    <function name='virNetworkGetUUID' file='python'>
      <info>Extract the UUID unique Identifier of a network.</info>
      <return type='char *' info='the 16 bytes string or None in case of error'/>
      <arg name='domain' type='virNetworkPtr' info='a network object'/>
    </function>
    <function name='virNetworkGetUUIDString' file='python'>
      <info>Fetch globally unique ID of the network as a string.</info>
      <return type='char *' info='the UUID string or None in case of error'/>
      <arg name='net' type='virNetworkPtr' info='a network object'/>
    </function>
    <function name='virStoragePoolGetUUID' file='python'>
      <info>Extract the UUID unique Identifier of a storage pool.</info>
      <return type='char *' info='the 16 bytes string or None in case of error'/>
      <arg name='pool' type='virStoragePoolPtr' info='a storage pool object'/>
    </function>
    <function name='virStoragePoolGetUUIDString' file='python'>
      <info>Fetch globally unique ID of the storage pool as a string.</info>
      <return type='char *' info='the UUID string or None in case of error'/>
      <arg name='pool' type='virStoragePoolPtr' info='a storage pool object'/>
    </function>
    <function name='virNetworkGetAutostart' file='python'>
      <info>Extract the autostart flag for a network.</info>
      <return type='int' info='the autostart flag, or None in case of error'/>
      <arg name='domain' type='virNetworkPtr' info='a network object'/>
    </function>
    <function name='virDomainGetAutostart' file='python'>
      <info>Extract the autostart flag for a domain</info>
      <return type='int' info='the autostart flag, or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a network object'/>
    </function>
    <function name='virStoragePoolGetAutostart' file='python'>
      <info>Extract the autostart flag for a storage pool</info>
      <return type='int' info='the autostart flag, or None in case of error'/>
      <arg name='pool' type='virStoragePoolPtr' info='a storage pool object'/>
    </function>
    <function name='virDomainBlockStats' file='python'>
      <info>Extracts block device statistics for a domain</info>
      <return type='virDomainBlockStats' info='a tuple of statistics'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='path' type='char *' info='the path for the block device'/>
    </function>
    <function name='virDomainBlockStatsFlags' file='python'>
      <info>Extracts block device statistics parameters of a running domain</info>
      <return type='str *' info='None in case of error, returns a dictionary of params'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='path' type='char *' info='the path for the block device'/>
      <arg name='flags' type='int' info='flags (unused; pass 0)'/>
    </function>
    <function name='virDomainGetCPUStats' file='python'>
      <info>Extracts CPU statistics for a running domain. On success it will
   return a list of data of dictionary type. If boolean total is False or 0, the
   first element of the list refers to CPU0 on the host, second element is
   CPU1, and so on. The format of data struct is as follows:
   [{cpu_time:xxx}, {cpu_time:xxx}, ...]
   If it is True or 1, it returns total domain CPU statistics in the format of
   [{cpu_time:xxx, user_time:xxx, system_time:xxx}]</info>
     <return type='str *' info='returns a list of dictionary in case of success, None in case of error'/>
     <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
     <arg name='total' type='bool' info='on true, return total domain CPU statistics, false return per-cpu info'/>
     <arg name='flags' type='int' info='flags (unused; pass 0)'/>
    </function>
    <function name='virDomainInterfaceStats' file='python'>
      <info>Extracts interface device statistics for a domain</info>
      <return type='virDomainInterfaceStats' info='a tuple of statistics'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='path' type='char *' info='the path for the interface device'/>
    </function>
    <function name='virDomainMemoryStats' file='python'>
      <info>Extracts memory statistics for a domain</info>
      <return type='virDomainMemoryStats' info='a dictionary of statistics'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
    </function>
    <function name="virNodeGetCellsFreeMemory" file='python'>
      <info>Returns the available memory for a list of cells</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='startCell' type='int' info='first cell in the list'/>
      <arg name='maxCells' type='int' info='number of cell in the list'/>
      <return type='int *' info="the list available memory in the cells"/>
    </function>
    <function name='virDomainGetSchedulerParameters' file='python'>
      <info>Get the scheduler parameters, the @params array will be filled with the values.</info>
      <return type='str *' info='None in case of error, returns a dictionary of params.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
    </function>
    <function name='virDomainGetSchedulerParametersFlags' file='python'>
      <info>Get the scheduler parameters</info>
     <return type='str *' info='None in case of error, returns a dictionary of params'/>
     <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
     <arg name='flags' type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainGetSchedulerType' file='python'>
      <info>Get the scheduler type.</info>
      <return type='char *' info='NULL in case of error. The caller must free the returned string.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
    </function>
    <function name='virDomainGetVcpus' file='python'>
      <info>Extract information about virtual CPUs of domain, store it in info array and also in cpumaps if this pointer is&apos;nt NULL.</info>
      <return type='int' info='the number of info filled in case of success, -1 in case of failure.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object, or NULL for Domain0'/>
    </function>
    <function name='virDomainPinVcpu' file='python'>
      <info>Dynamically change the real CPUs which can be allocated to a virtual CPU. This function requires privileged access to the hypervisor.</info>
      <return type='int' info='0 in case of success, -1 in case of failure.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object, or NULL for Domain0'/>
      <arg name='vcpu' type='unsigned int' info='virtual CPU number'/>
      <arg name='cpumap' type='unsigned char *' info='pointer to a bit map of real CPUs (in 8-bit bytes) (IN) Each bit set to 1 means that corresponding CPU is usable. Bytes are stored in little-endian order: CPU0-7, 8-15... In each byte, lowest CPU number is least significant bit.'/>
    </function>
    <function name='virDomainPinVcpuFlags' file='python'>
      <info>Dynamically change the real CPUs which can be allocated to a virtual CPU. This function requires privileged access to the hypervisor.</info>
      <return type='int' info='0 in case of success, -1 in case of failure.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object, or NULL for Domain0'/>
      <arg name='vcpu' type='unsigned int' info='virtual CPU number'/>
      <arg name='cpumap' type='unsigned char *' info='pointer to a bit map of real CPUs (in 8-bit bytes) (IN) Each bit set to 1 means that corresponding CPU is usable. Bytes are stored in little-endian order: CPU0-7, 8-15... In each byte, lowest CPU number is least significant bit.'/>
      <arg name='flags' type='int' info='flags to specify'/>
    </function>
    <function name='virDomainGetVcpuPinInfo' file='python'>
      <info>Query the CPU affinity setting of all virtual CPUs of domain</info>
      <return type='unsigned char *' info='the array of cpumap'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object, or NULL for Domain0'/>
      <arg name='flags'  type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainSetSchedulerParameters' file='python'>
      <info>Change the scheduler parameters</info>
      <return type='int' info='-1 in case of error, 0 in case of success.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='params' type='virSchedParameterPtr' info='pointer to scheduler parameter objects'/>
    </function>
    <function name='virDomainSetSchedulerParametersFlags' file='python'>
      <info>Change the scheduler parameters</info>
      <return type='int' info='-1 in case of error, 0 in case of success.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='params' type='virSchedParameterPtr' info='pointer to scheduler parameter objects'/>
      <arg name='flags'  type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainSetBlkioParameters' file='python'>
      <info>Change the blkio tunables</info>
      <return type='int' info='-1 in case of error, 0 in case of success.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='params' type='virBlkioParameterPtr' info='pointer to blkio tunable objects'/>
      <arg name='flags'  type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainGetBlkioParameters' file='python'>
      <info>Get the blkio parameters</info>
      <return type='str *' info='None in case of error, returns a dictionary of params'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='flags' type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainSetMemoryParameters' file='python'>
      <info>Change the memory tunables</info>
      <return type='int' info='-1 in case of error, 0 in case of success.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='params' type='virMemoryParameterPtr' info='pointer to memory tunable objects'/>
      <arg name='flags'  type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainGetMemoryParameters' file='python'>
      <info>Get the memory parameters</info>
      <return type='str *' info='None in case of error, returns a dictionary of params'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='flags' type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainSetNumaParameters' file='python'>
      <info>Change the NUMA tunables</info>
      <return type='int' info='-1 in case of error, 0 in case of success.'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='params' type='virTypedParameterPtr' info='pointer to numa tunable objects'/>
      <arg name='flags'  type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainGetNumaParameters' file='python'>
      <info>Get the NUMA parameters</info>
      <return type='str *' info='returns a dictionary of params in case of success, None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='pointer to domain object'/>
      <arg name='flags' type='int' info='an OR&apos;ed set of virDomainModificationImpact'/>
    </function>
    <function name='virDomainSetInterfaceParameters' file='python'>
      <info>Change the bandwidth tunables for a interface device</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='device' type='const char *' info='interface name'/>
      <arg name='params' type='virTypedParameterPtr' info='Pointer to bandwidth tuning params object'/>
      <arg name='flags' type='unsigned int' info='an OR&apos;ed set of virDomainModificationImpact'/>
      <return type='int' info='0 in case of success, -1 in case of failure'/>
    </function>
    <function name='virDomainGetInterfaceParameters' file='python'>
      <info>Get the bandwidth tunables for a interface device</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='device' type='const char *' info='interface name'/>
      <arg name='flags' type='unsigned int' info='an OR&apos;ed set of virDomainModificationImpact'/>
      <return type='str *' info='the bandwidth tunables value or None in case of error'/>
    </function>

    <function name='virConnectListStoragePools' file='python'>
      <info>list the storage pools, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names of None in case of error'/>
    </function>
    <function name='virConnectListDefinedStoragePools' file='python'>
      <info>list the defined storage pool, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names of None in case of error'/>
    </function>
    <function name='virConnectListAllStoragePools' file='python'>
      <info>returns list of all storage pools</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='pool *' info='the list of pools or None in case of error'/>
    </function>
    <function name='virStoragePoolListVolumes' file='python'>
      <info>list the storage volumes, stores the pointers to the names in @names</info>
      <arg name='pool' type='virStoragePoolPtr' info='pointer to the storage pool'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virStoragePoolListAllVolumes' file='python'>
      <info>return list of storage volume objects</info>
      <arg name='pool' type='virStoragePoolPtr' info='pointer to the storage pool'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='volume *' info='the list of volumes or None in case of error'/>
    </function>
    <function name='virStoragePoolGetInfo' file='python'>
      <info>Extract information about a storage pool. Note that if the connection used to get the domain is limited only a partial set of the information can be extracted.</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='pool' type='virStoragePoolPtr' info='a storage pool object'/>
    </function>
    <function name='virStorageVolGetInfo' file='python'>
      <info>Extract information about a storage volume. Note that if the connection used to get the domain is limited only a partial set of the information can be extracted.</info>
      <return type='int *' info='the list of information or None in case of error'/>
      <arg name='vol' type='virStorageVolPtr' info='a storage vol object'/>
    </function>
    <function name='virNodeListDevices' file='python'>
      <info>list the node devices</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='cap' type='const unsigned char *' info='capability name'/>
      <arg name='flags' type='unsigned int' info='flags (unused; pass 0)'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virConnectListAllNodeDevices' file='python'>
      <info>returns list of all host node devices</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='device *' info='the list of host node device or None in case of error'/>
    </function>
    <function name='virNodeDeviceListCaps' file='python'>
      <info>list the node device's capabilities</info>
      <arg name='dev' type='virNodeDevicePtr' info='pointer to the node device'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virSecretGetValue' file='libvirt' module='libvirt'>
      <info>Fetches the value associated with a secret.</info>
      <return type='char *' info='the secret value or None in case of error'/>
      <arg name='secret' type='virSecretPtr' info='virSecret secret'/>
      <arg name='flags' type='unsigned int' info='flags (unused; pass 0)'/>
    </function>
    <function name='virConnectListSecrets' file='libvirt' module='libvirt'>
      <info>List the defined secret IDs</info>
      <arg name='conn' type='virConnectPtr' info='virConnect connection'/>
      <return type='str *' info='the list of secret IDs or None in case of error'/>
    </function>
    <function name='virConnectListAllSecrets' file='python'>
      <info>returns list of all interfaces</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='secret *' info='the list of secrets or None in case of error'/>
    </function>
    <function name='virSecretSetValue' file='libvirt' module='libvirt'>
      <info>Associates a value with a secret.</info>
      <return type='int' info='0 on success, -1 on failure.'/>
      <arg name='secret' type='virSecretPtr' info='virSecret secret'/>
      <arg name='value' type='const char *' info='The secret value'/>
      <arg name='flags' type='unsigned int' info='flags (unused; pass 0)'/>
    </function>
    <function name='virSecretLookupByUUID' file='python'>
      <info>Try to lookup a secret on the given hypervisor based on its UUID.</info>
      <return type='virSecretPtr' info='a new secret object or NULL in case of failure'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='uuid' type='const unsigned char *' info='the UUID string for the secret, must be 16 bytes'/>
    </function>
    <function name='virSecretGetUUID' file='python'>
      <info>Extract the UUID unique Identifier of a secret.</info>
      <return type='char *' info='the 16 bytes string or None in case of error'/>
      <arg name='secret' type='virSecretPtr' info='a secret object'/>
    </function>
    <function name='virSecretGetUUIDString' file='python'>
      <info>Fetch globally unique ID of the secret as a string.</info>
      <return type='char *' info='the UUID string or None in case of error'/>
      <arg name='secret' type='virSecretPtr' info='a secret object'/>
    </function>
    <function name='virConnectListNWFilters' file='libvirt' module='libvirt'>
      <info>List the defined network filters</info>
      <arg name='conn' type='virConnectPtr' info='virConnect connection'/>
      <return type='str *' info='the list of network filter IDs or None in case of error'/>
    </function>
    <function name='virConnectListAllNWFilters' file='python'>
      <info>returns list of all network fitlers</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='nwfilter *' info='the list of network filters or None in case of error'/>
    </function>
    <function name='virNWFilterLookupByUUID' file='python'>
      <info>Try to lookup a network filter on the given hypervisor based on its UUID.</info>
      <return type='virNWFilterPtr' info='a new network filter object or NULL in case of failure'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='uuid' type='const unsigned char *' info='the UUID string for the secret, must be 16 bytes'/>
    </function>
    <function name='virNWFilterGetUUID' file='python'>
      <info>Extract the UUID unique Identifier of a network filter.</info>
      <return type='char *' info='the 16 bytes string or None in case of error'/>
      <arg name='nwfilter' type='virNWFilterPtr' info='a network filter object'/>
    </function>
    <function name='virNWFilterGetUUIDString' file='python'>
      <info>Fetch globally unique ID of the network filter as a string.</info>
      <return type='char *' info='the UUID string or None in case of error'/>
      <arg name='nwfilter' type='virNWFilterPtr' info='a network filter object'/>
    </function>
    <function name='virConnectListInterfaces' file='python'>
      <info>list the running interfaces, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names of None in case of error'/>
    </function>
    <function name='virConnectListDefinedInterfaces' file='python'>
      <info>list the defined interfaces, stores the pointers to the names in @names</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <return type='str *' info='the list of Names of None in case of error'/>
    </function>
    <function name='virConnectListAllInterfaces' file='python'>
      <info>returns list of all interfaces</info>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='unsigned int' info='optional flags'/>
      <return type='interface *' info='the list of interfaces or None in case of error'/>
    </function>
    <function name='virConnectBaselineCPU' file='python'>
      <info>Computes the most feature-rich CPU which is compatible with all given host CPUs.</info>
      <return type='char *' info='XML description of the computed CPU or NULL on error.'/>
      <arg name='conn' type='virConnectPtr' info='virConnect connection'/>
      <arg name='xmlCPUs' type='const char **' info='array of XML descriptions of host CPUs'/>
      <arg name='flags' type='unsigned int' info='fine-tuning flags, currently unused, pass 0.'/>
    </function>
    <function name='virDomainSnapshotListNames' file='python'>
      <info>collect the list of snapshot names for the given domain</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='flags' type='unsigned int' info='flags'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virDomainListAllSnapshots' file='python'>
      <info>returns the list of snapshots for the given domain</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='flags' type='unsigned int' info='flags'/>
      <return type='snapshot *' info='the list of snapshots or None in case of error'/>
    </function>
    <function name='virDomainSnapshotListChildrenNames' file='python'>
      <info>collect the list of child snapshot names for the given snapshot</info>
      <arg name='snapshot' type='virDomainSnapshotPtr' info='pointer to the snapshot'/>
      <arg name='flags' type='unsigned int' info='flags'/>
      <return type='str *' info='the list of Names or None in case of error'/>
    </function>
    <function name='virDomainSnapshotListAllChildren' file='python'>
      <info>returns the list of child snapshots for the given snapshot</info>
      <arg name='snapshot' type='virDomainSnapshotPtr' info='pointer to the snapshot'/>
      <arg name='flags' type='unsigned int' info='flags'/>
      <return type='snapshot *' info='the list of snapshots or None in case of error'/>
    </function>
    <function name='virDomainRevertToSnapshot' file='python'>
      <info>revert the domain to the given snapshot</info>
      <arg name='dom' type='virDomainPtr' info='dummy domain pointer'/>
      <arg name='snap' type='virDomainSnapshotPtr' info='pointer to the snapshot'/>
      <arg name='flags' type='unsigned int' info='flags'/>
      <return type='int' info="0 on success, -1 on error"/>
    </function>
    <function name='virDomainGetBlockJobInfo' file='python'>
      <info>Get progress information for a block job</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='path' type='const char *' info='Fully-qualified filename of disk'/>
      <arg name='flags' type='unsigned int' info='fine-tuning flags, currently unused, pass 0.'/>
      <return type='virDomainBlockJobInfo' info='A dictionary containing job information.' />
    </function>
    <function name='virDomainMigrateGetMaxSpeed' file='python'>
      <info>Get currently configured maximum migration speed for a domain</info>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='flags' type='unsigned int' info='flags, currently unused, pass 0.'/>
      <return type='unsigned long' info='current max migration speed, or None in case of error'/>
    </function>
    <function name='virDomainSetBlockIoTune' file='python'>
      <info>Change the I/O tunables for a block device</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='disk' type='const char *' info='disk name'/>
      <arg name='params' type='virTypedParameterPtr' info='Pointer to blkio tuning params object'/>
      <arg name='flags' type='unsigned int' info='an OR&apos;ed set of virDomainModificationImpact'/>
      <return type='int' info='0 in case of success, -1 in case of failure'/>
    </function>
    <function name='virDomainGetBlockIoTune' file='python'>
      <info>Get the I/O tunables for a block device</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='disk' type='const char *' info='disk name'/>
      <arg name='flags' type='unsigned int' info='an OR&apos;ed set of virDomainModificationImpact'/>
      <return type='str *' info='the I/O tunables value or None in case of error'/>
    </function>
    <function name='virDomainBlockPeek' file='python'>
      <info>Read the contents of domain's disk device</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='disk' type='const char *' info='disk name'/>
      <arg name='offset' type='unsigned long long' info='offset within block device'/>
      <arg name='size' type='size_t' info='size to read'/>
      <arg name='flags' type='unsigned int' info='unused, always pass 0'/>
      <return type='char *' info='the returned buffer or None in case of error'/>
    </function>
    <function name='virDomainMemoryPeek' file='python'>
      <info>Read the contents of domain's memory</info>
      <arg name='dom' type='virDomainPtr' info='pointer to the domain'/>
      <arg name='start' type='unsigned long long' info='start of memory to peek'/>
      <arg name='size' type='size_t' info='size of memory to peek'/>
      <arg name='flags' type='unsigned int' info='an OR&apos;ed set of virDomainMemoryFlags'/>
      <return type='char *' info='the returned buffer or None in case of error'/>
    </function>
    <function name='virDomainGetDiskErrors' file='python'>
      <info>Extract errors on disk devices.</info>
      <return type='virDomainDiskErrorPtr' info='dictionary of disks and their errors or None in case of error'/>
      <arg name='domain' type='virDomainPtr' info='a domain object'/>
      <arg name='flags' type='unsigned int' info='unused, always pass 0'/>
    </function>
    <function name='virNodeSetMemoryParameters' file='python'>
      <info>Change the node memory tunables</info>
      <return type='int' info='-1 in case of error, 0 in case of success.'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='params' type='virTypedParameterPtr' info='pointer to the memory tunable objects'/>
      <arg name='flags'  type='int' info='unused, always pass 0'/>
    </function>
    <function name='virNodeGetMemoryParameters' file='python'>
      <info>Get the node memory parameters</info>
      <return type='str *' info='None in case of error, returns a dictionary of params'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='int' info='unused, always pass 0'/>
    </function>
    <function name='virNodeGetCPUMap' file='python'>
      <info>Get node CPU information</info>
      <return type='str *' info='(cpunum, cpumap, online) on success, None on error'/>
      <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/>
      <arg name='flags' type='int' info='unused, pass 0'/>
    </function>
  </symbols>
</api>
generated by cgit (git 2.34.1) at 2026-02-27 00:17:55 +0000