From bf4661bcb0e70da975b7513006b204f01fdbc0f7 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 27 Feb 2020 17:21:54 +0200 Subject: dm: serial: Add clock member to struct serial_device_info Some callers of serial_getinfo() would like to know the UART base clock speed in order to make decision what to pass to OS in some cases. In particular, ACPI SPCR table expects only certain base clock speed and thus we have to act accordingly. Signed-off-by: Andy Shevchenko Reviewed-by: Simon Glass Reviewed-by: Bin Meng --- include/serial.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/serial.h b/include/serial.h index 104f34ff91..54b21a0470 100644 --- a/include/serial.h +++ b/include/serial.h @@ -139,6 +139,7 @@ enum adr_space_type { * @reg_width: size (in bytes) of the IO accesses to the registers * @reg_offset: offset to apply to the @addr from the start of the registers * @reg_shift: quantity to shift the register offsets by + * @clock: UART base clock speed in Hz * @baudrate: baud rate */ struct serial_device_info { @@ -148,10 +149,12 @@ struct serial_device_info { u8 reg_width; u8 reg_offset; u8 reg_shift; + unsigned int clock; unsigned int baudrate; }; #define SERIAL_DEFAULT_ADDRESS 0xBADACCE5 +#define SERIAL_DEFAULT_CLOCK (16 * 115200) /** * struct struct dm_serial_ops - Driver model serial operations -- cgit From 600f584d8191799acc19464c4a07f3056083057a Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:20 -0600 Subject: cpu: Support querying the address width Different CPUs may support different address widths, meaning the amount of memory they can address. Add a property for this to the cpu_info struct. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- include/cpu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/cpu.h b/include/cpu.h index 28dd48feb8..6b1b6b37b3 100644 --- a/include/cpu.h +++ b/include/cpu.h @@ -44,10 +44,12 @@ enum { * * @cpu_freq: Current CPU frequency in Hz * @features: Flags for supported CPU features + * @address_width: Width of the CPU address space in bits (e.g. 32) */ struct cpu_info { ulong cpu_freq; ulong features; + uint address_width; }; struct cpu_ops { -- cgit From b14ccfcf091f6d8f075043569b28ab385f5a481f Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:21 -0600 Subject: spi: Add SPI mode enums With ACPI we need to describe the settings of the SPI bus. Add enums to handle this. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Wolfgang Wallner --- include/spi.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'include') diff --git a/include/spi.h b/include/spi.h index 852f570eaa..2b4929fc79 100644 --- a/include/spi.h +++ b/include/spi.h @@ -66,6 +66,39 @@ struct dm_spi_slave_platdata { #endif /* CONFIG_DM_SPI */ +/** + * enum spi_clock_phase - indicates the clock phase to use for SPI (CPHA) + * + * @SPI_CLOCK_PHASE_FIRST: Data sampled on the first phase + * @SPI_CLOCK_PHASE_SECOND: Data sampled on the second phase + */ +enum spi_clock_phase { + SPI_CLOCK_PHASE_FIRST, + SPI_CLOCK_PHASE_SECOND, +}; + +/** + * enum spi_wire_mode - indicates the number of wires used for SPI + * + * @SPI_4_WIRE_MODE: Normal bidirectional mode with MOSI and MISO + * @SPI_3_WIRE_MODE: Unidirectional version with a single data line SISO + */ +enum spi_wire_mode { + SPI_4_WIRE_MODE, + SPI_3_WIRE_MODE, +}; + +/** + * enum spi_polarity - indicates the polarity of the SPI bus (CPOL) + * + * @SPI_POLARITY_LOW: Clock is low in idle state + * @SPI_POLARITY_HIGH: Clock is high in idle state + */ +enum spi_polarity { + SPI_POLARITY_LOW, + SPI_POLARITY_HIGH, +}; + /** * struct spi_slave - Representation of a SPI slave * -- cgit From 7ca2850cbcb2adca4f6927d9bf77626091ab5c3e Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 9 Apr 2020 10:27:38 -0600 Subject: dm: core: Add basic ACPI support ACPI (Advanced Configuration and Power Interface) is a standard for specifying information about a platform. It is a little like device tree but the bindings are part of the specification and it supports an interpreted bytecode language. Driver model does not use ACPI for U-Boot's configuration, but it is convenient to have it support generation of ACPI tables for passing to Linux, etc. As a starting point, add an optional set of ACPI operations to each device. Initially only a single operation is available, to obtain the ACPI name for the device. More operations are added later. Enable ACPI for sandbox to ensure build coverage and so that we can add tests. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Wolfgang Wallner Reviewed-by: Andy Shevchenko --- include/dm/acpi.h | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++++ include/dm/device.h | 5 ++++ include/log.h | 2 ++ 3 files changed, 80 insertions(+) create mode 100644 include/dm/acpi.h (limited to 'include') diff --git a/include/dm/acpi.h b/include/dm/acpi.h new file mode 100644 index 0000000000..ba0813fa21 --- /dev/null +++ b/include/dm/acpi.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Core ACPI (Advanced Configuration and Power Interface) support + * + * Copyright 2019 Google LLC + * Written by Simon Glass + */ + +#ifndef __DM_ACPI_H__ +#define __DM_ACPI_H__ + +/* Allow operations to be optional for ACPI */ +#if CONFIG_IS_ENABLED(ACPIGEN) +#define ACPI_OPS_PTR(_ptr) .acpi_ops = _ptr, +#else +#define ACPI_OPS_PTR(_ptr) +#endif + +/* Length of an ACPI name string, excluding nul terminator */ +#define ACPI_NAME_LEN 4 + +/* Length of an ACPI name string including nul terminator */ +#define ACPI_NAME_MAX (ACPI_NAME_LEN + 1) + +/** + * struct acpi_ops - ACPI operations supported by driver model + */ +struct acpi_ops { + /** + * get_name() - Obtain the ACPI name of a device + * + * @dev: Device to check + * @out_name: Place to put the name, must hold at least ACPI_NAME_MAX + * bytes + * @return 0 if OK, -ENOENT if no name is available, other -ve value on + * other error + */ + int (*get_name)(const struct udevice *dev, char *out_name); +}; + +#define device_get_acpi_ops(dev) ((dev)->driver->acpi_ops) + +/** + * acpi_get_name() - Obtain the ACPI name of a device + * + * @dev: Device to check + * @out_name: Place to put the name, must hold at least ACPI_NAME_MAX + * bytes + * @return 0 if OK, -ENOENT if no name is available, other -ve value on + * other error + */ +int acpi_get_name(const struct udevice *dev, char *out_name); + +/** + * acpi_copy_name() - Copy an ACPI name to an output buffer + * + * This convenience function can be used to return a literal string as a name + * in functions that implement the get_name() method. + * + * For example: + * + * static int mydev_get_name(const struct udevice *dev, char *out_name) + * { + * return acpi_copy_name(out_name, "WIBB"); + * } + * + * @out_name: Place to put the name + * @name: Name to copy + * @return 0 (always) + */ +int acpi_copy_name(char *out_name, const char *name); + +#endif diff --git a/include/dm/device.h b/include/dm/device.h index a56164b19b..35e19d8700 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -245,6 +245,8 @@ struct udevice_id { * pointers defined by the driver, to implement driver functions required by * the uclass. * @flags: driver flags - see DM_FLAGS_... + * @acpi_ops: Advanced Configuration and Power Interface (ACPI) operations, + * allowing the device to add things to the ACPI tables passed to Linux */ struct driver { char *name; @@ -264,6 +266,9 @@ struct driver { int per_child_platdata_auto_alloc_size; const void *ops; /* driver-specific operations */ uint32_t flags; +#if CONFIG_IS_ENABLED(ACPIGEN) + struct acpi_ops *acpi_ops; +#endif }; /* Declare a new U-Boot driver */ diff --git a/include/log.h b/include/log.h index 62fb8afbd0..fbcbd42fb4 100644 --- a/include/log.h +++ b/include/log.h @@ -51,6 +51,8 @@ enum log_category_t { LOGC_SANDBOX, /* Related to the sandbox board */ LOGC_BLOBLIST, /* Bloblist */ LOGC_DEVRES, /* Device resources (devres_... functions) */ + /* Advanced Configuration and Power Interface (ACPI) */ + LOGC_ACPI, LOGC_COUNT, /* Number of log categories */ LOGC_END, /* Sentinel value for a list of log categories */ -- cgit From f50cc9528850ed546b44894cdc7ab4ceb4b30550 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:34 -0600 Subject: acpi: Add a simple sandbox test Add a sandbox test for the basic ACPI functionality we have so far. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Wolfgang Wallner --- include/dm/uclass-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 598f65ea7a..37ada51f9f 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -20,6 +20,7 @@ enum uclass_id { UCLASS_TEST_PROBE, UCLASS_TEST_DUMMY, UCLASS_TEST_DEVRES, + UCLASS_TEST_ACPI, UCLASS_SPI_EMUL, /* sandbox SPI device emulator */ UCLASS_I2C_EMUL, /* sandbox I2C device emulator */ UCLASS_I2C_EMUL_PARENT, /* parent for I2C device emulators */ -- cgit From 3cabcf966d42649cd60eb575c9cf5c22eb9e9123 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:35 -0600 Subject: x86: Move acpi_s3.h to include/acpi/ This header relates to ACPI and we are about to add some more ACPI headers. Move this one into a new directory so they are together. The header inclusion in pci_rom.c is not specific to x86 anymore, so drop the #ifdef CONFIG_X86. Signed-off-by: Simon Glass Reviewed-by: Andy Shevchenko Reviewed-by: Wolfgang Wallner Reviewed-by: Bin Meng --- include/acpi/acpi_s3.h | 130 +++++++++++++++++++++++++++++++++++++++++++++++++ include/acpi_s3.h | 130 ------------------------------------------------- 2 files changed, 130 insertions(+), 130 deletions(-) create mode 100644 include/acpi/acpi_s3.h delete mode 100644 include/acpi_s3.h (limited to 'include') diff --git a/include/acpi/acpi_s3.h b/include/acpi/acpi_s3.h new file mode 100644 index 0000000000..baa848dcd1 --- /dev/null +++ b/include/acpi/acpi_s3.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017, Bin Meng + */ + +#ifndef __ASM_ACPI_S3_H__ +#define __ASM_ACPI_S3_H__ + +#define WAKEUP_BASE 0x600 + +/* PM1_STATUS register */ +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define RTC_STS (1 << 10) +#define SLPBTN_STS (1 << 9) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMR_STS (1 << 0) + +/* PM1_CNT register */ +#define SLP_EN (1 << 13) +#define SLP_TYP_SHIFT 10 +#define SLP_TYP (7 << SLP_TYP_SHIFT) +#define SLP_TYP_S0 0 +#define SLP_TYP_S1 1 +#define SLP_TYP_S3 5 +#define SLP_TYP_S4 6 +#define SLP_TYP_S5 7 + +/* Memory size reserved for S3 resume */ +#define S3_RESERVE_SIZE 0x1000 + +#ifndef __ASSEMBLY__ + +extern char __wakeup[]; +extern int __wakeup_size; + +enum acpi_sleep_state { + ACPI_S0, + ACPI_S1, + ACPI_S2, + ACPI_S3, + ACPI_S4, + ACPI_S5, +}; + +/** + * acpi_ss_string() - get ACPI-defined sleep state string + * + * @pm1_cnt: ACPI-defined sleep state + * @return: a pointer to the sleep state string. + */ +static inline char *acpi_ss_string(enum acpi_sleep_state state) +{ + char *ss_string[] = { "S0", "S1", "S2", "S3", "S4", "S5"}; + + return ss_string[state]; +} + +/** + * acpi_sleep_from_pm1() - get ACPI-defined sleep state from PM1_CNT register + * + * @pm1_cnt: PM1_CNT register value + * @return: ACPI-defined sleep state if given valid PM1_CNT register value, + * -EINVAL otherwise. + */ +static inline enum acpi_sleep_state acpi_sleep_from_pm1(u32 pm1_cnt) +{ + switch ((pm1_cnt & SLP_TYP) >> SLP_TYP_SHIFT) { + case SLP_TYP_S0: + return ACPI_S0; + case SLP_TYP_S1: + return ACPI_S1; + case SLP_TYP_S3: + return ACPI_S3; + case SLP_TYP_S4: + return ACPI_S4; + case SLP_TYP_S5: + return ACPI_S5; + } + + return -EINVAL; +} + +/** + * chipset_prev_sleep_state() - Get chipset previous sleep state + * + * This returns chipset previous sleep state from ACPI registers. + * Platform codes must supply this routine in order to support ACPI S3. + * + * @return ACPI_S0/S1/S2/S3/S4/S5. + */ +enum acpi_sleep_state chipset_prev_sleep_state(void); + +/** + * chipset_clear_sleep_state() - Clear chipset sleep state + * + * This clears chipset sleep state in ACPI registers. + * Platform codes must supply this routine in order to support ACPI S3. + */ +void chipset_clear_sleep_state(void); + +struct acpi_fadt; +/** + * acpi_resume() - Do ACPI S3 resume + * + * This calls U-Boot wake up assembly stub and jumps to OS's wake up vector. + * + * @fadt: FADT table pointer in the ACPI table + * @return: Never returns + */ +void acpi_resume(struct acpi_fadt *fadt); + +/** + * acpi_s3_reserve() - Reserve memory for ACPI S3 resume + * + * This copies memory where real mode interrupt handler stubs reside to the + * reserved place on the stack. + * + * This routine should be called by reserve_arch() before U-Boot is relocated + * when ACPI S3 resume is enabled. + * + * @return: 0 always + */ +int acpi_s3_reserve(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ACPI_S3_H__ */ diff --git a/include/acpi_s3.h b/include/acpi_s3.h deleted file mode 100644 index baa848dcd1..0000000000 --- a/include/acpi_s3.h +++ /dev/null @@ -1,130 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017, Bin Meng - */ - -#ifndef __ASM_ACPI_S3_H__ -#define __ASM_ACPI_S3_H__ - -#define WAKEUP_BASE 0x600 - -/* PM1_STATUS register */ -#define WAK_STS (1 << 15) -#define PCIEXPWAK_STS (1 << 14) -#define RTC_STS (1 << 10) -#define SLPBTN_STS (1 << 9) -#define PWRBTN_STS (1 << 8) -#define GBL_STS (1 << 5) -#define BM_STS (1 << 4) -#define TMR_STS (1 << 0) - -/* PM1_CNT register */ -#define SLP_EN (1 << 13) -#define SLP_TYP_SHIFT 10 -#define SLP_TYP (7 << SLP_TYP_SHIFT) -#define SLP_TYP_S0 0 -#define SLP_TYP_S1 1 -#define SLP_TYP_S3 5 -#define SLP_TYP_S4 6 -#define SLP_TYP_S5 7 - -/* Memory size reserved for S3 resume */ -#define S3_RESERVE_SIZE 0x1000 - -#ifndef __ASSEMBLY__ - -extern char __wakeup[]; -extern int __wakeup_size; - -enum acpi_sleep_state { - ACPI_S0, - ACPI_S1, - ACPI_S2, - ACPI_S3, - ACPI_S4, - ACPI_S5, -}; - -/** - * acpi_ss_string() - get ACPI-defined sleep state string - * - * @pm1_cnt: ACPI-defined sleep state - * @return: a pointer to the sleep state string. - */ -static inline char *acpi_ss_string(enum acpi_sleep_state state) -{ - char *ss_string[] = { "S0", "S1", "S2", "S3", "S4", "S5"}; - - return ss_string[state]; -} - -/** - * acpi_sleep_from_pm1() - get ACPI-defined sleep state from PM1_CNT register - * - * @pm1_cnt: PM1_CNT register value - * @return: ACPI-defined sleep state if given valid PM1_CNT register value, - * -EINVAL otherwise. - */ -static inline enum acpi_sleep_state acpi_sleep_from_pm1(u32 pm1_cnt) -{ - switch ((pm1_cnt & SLP_TYP) >> SLP_TYP_SHIFT) { - case SLP_TYP_S0: - return ACPI_S0; - case SLP_TYP_S1: - return ACPI_S1; - case SLP_TYP_S3: - return ACPI_S3; - case SLP_TYP_S4: - return ACPI_S4; - case SLP_TYP_S5: - return ACPI_S5; - } - - return -EINVAL; -} - -/** - * chipset_prev_sleep_state() - Get chipset previous sleep state - * - * This returns chipset previous sleep state from ACPI registers. - * Platform codes must supply this routine in order to support ACPI S3. - * - * @return ACPI_S0/S1/S2/S3/S4/S5. - */ -enum acpi_sleep_state chipset_prev_sleep_state(void); - -/** - * chipset_clear_sleep_state() - Clear chipset sleep state - * - * This clears chipset sleep state in ACPI registers. - * Platform codes must supply this routine in order to support ACPI S3. - */ -void chipset_clear_sleep_state(void); - -struct acpi_fadt; -/** - * acpi_resume() - Do ACPI S3 resume - * - * This calls U-Boot wake up assembly stub and jumps to OS's wake up vector. - * - * @fadt: FADT table pointer in the ACPI table - * @return: Never returns - */ -void acpi_resume(struct acpi_fadt *fadt); - -/** - * acpi_s3_reserve() - Reserve memory for ACPI S3 resume - * - * This copies memory where real mode interrupt handler stubs reside to the - * reserved place on the stack. - * - * This routine should be called by reserve_arch() before U-Boot is relocated - * when ACPI S3 resume is enabled. - * - * @return: 0 always - */ -int acpi_s3_reserve(void); - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ACPI_S3_H__ */ -- cgit From 776cc2019467567b9a834f80cc5b03128efa372a Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:36 -0600 Subject: x86: Move acpi_table header to main include/ directory This file is potentially useful to other architectures saddled with ACPI so move most of its contents to a common location. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Wolfgang Wallner --- include/acpi/acpi_table.h | 394 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 394 insertions(+) create mode 100644 include/acpi/acpi_table.h (limited to 'include') diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h new file mode 100644 index 0000000000..b4404a632c --- /dev/null +++ b/include/acpi/acpi_table.h @@ -0,0 +1,394 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Helpers for ACPI table generation + * + * Based on acpi.c from coreboot + * + * Copyright 2019 Google LLC + * + * Copyright (C) 2015, Saket Sinha + * Copyright (C) 2016, Bin Meng + */ + +#ifndef __ACPI_TABLE_H__ +#define __ACPI_TABLE_H__ + +#define RSDP_SIG "RSD PTR " /* RSDP pointer signature */ +#define OEM_ID "U-BOOT" /* U-Boot */ +#define OEM_TABLE_ID "U-BOOTBL" /* U-Boot Table */ +#define ASLC_ID "INTL" /* Intel ASL Compiler */ + +#define ACPI_RSDP_REV_ACPI_1_0 0 +#define ACPI_RSDP_REV_ACPI_2_0 2 + +/* + * RSDP (Root System Description Pointer) + * Note: ACPI 1.0 didn't have length, xsdt_address, and ext_checksum + */ +struct acpi_rsdp { + char signature[8]; /* RSDP signature */ + u8 checksum; /* Checksum of the first 20 bytes */ + char oem_id[6]; /* OEM ID */ + u8 revision; /* 0 for ACPI 1.0, others 2 */ + u32 rsdt_address; /* Physical address of RSDT (32 bits) */ + u32 length; /* Total RSDP length (incl. extended part) */ + u64 xsdt_address; /* Physical address of XSDT (64 bits) */ + u8 ext_checksum; /* Checksum of the whole table */ + u8 reserved[3]; +}; + +/* Generic ACPI header, provided by (almost) all tables */ +struct __packed acpi_table_header { + char signature[4]; /* ACPI signature (4 ASCII characters) */ + u32 length; /* Table length in bytes (incl. header) */ + u8 revision; /* Table version (not ACPI version!) */ + volatile u8 checksum; /* To make sum of entire table == 0 */ + char oem_id[6]; /* OEM identification */ + char oem_table_id[8]; /* OEM table identification */ + u32 oem_revision; /* OEM revision number */ + char aslc_id[4]; /* ASL compiler vendor ID */ + u32 aslc_revision; /* ASL compiler revision number */ +}; + +/* A maximum number of 32 ACPI tables ought to be enough for now */ +#define MAX_ACPI_TABLES 32 + +/* RSDT (Root System Description Table) */ +struct acpi_rsdt { + struct acpi_table_header header; + u32 entry[MAX_ACPI_TABLES]; +}; + +/* XSDT (Extended System Description Table) */ +struct acpi_xsdt { + struct acpi_table_header header; + u64 entry[MAX_ACPI_TABLES]; +}; + +/* FADT Preferred Power Management Profile */ +enum acpi_pm_profile { + ACPI_PM_UNSPECIFIED = 0, + ACPI_PM_DESKTOP, + ACPI_PM_MOBILE, + ACPI_PM_WORKSTATION, + ACPI_PM_ENTERPRISE_SERVER, + ACPI_PM_SOHO_SERVER, + ACPI_PM_APPLIANCE_PC, + ACPI_PM_PERFORMANCE_SERVER, + ACPI_PM_TABLET +}; + +/* FADT flags for p_lvl2_lat and p_lvl3_lat */ +#define ACPI_FADT_C2_NOT_SUPPORTED 101 +#define ACPI_FADT_C3_NOT_SUPPORTED 1001 + +/* FADT Boot Architecture Flags */ +#define ACPI_FADT_LEGACY_FREE 0x00 +#define ACPI_FADT_LEGACY_DEVICES BIT(0) +#define ACPI_FADT_8042 BIT(1) +#define ACPI_FADT_VGA_NOT_PRESENT BIT(2) +#define ACPI_FADT_MSI_NOT_SUPPORTED BIT(3) +#define ACPI_FADT_NO_PCIE_ASPM_CONTROL BIT(4) + +/* FADT Feature Flags */ +#define ACPI_FADT_WBINVD BIT(0) +#define ACPI_FADT_WBINVD_FLUSH BIT(1) +#define ACPI_FADT_C1_SUPPORTED BIT(2) +#define ACPI_FADT_C2_MP_SUPPORTED BIT(3) +#define ACPI_FADT_POWER_BUTTON BIT(4) +#define ACPI_FADT_SLEEP_BUTTON BIT(5) +#define ACPI_FADT_FIXED_RTC BIT(6) +#define ACPI_FADT_S4_RTC_WAKE BIT(7) +#define ACPI_FADT_32BIT_TIMER BIT(8) +#define ACPI_FADT_DOCKING_SUPPORTED BIT(9) +#define ACPI_FADT_RESET_REGISTER BIT(10) +#define ACPI_FADT_SEALED_CASE BIT(11) +#define ACPI_FADT_HEADLESS BIT(12) +#define ACPI_FADT_SLEEP_TYPE BIT(13) +#define ACPI_FADT_PCI_EXPRESS_WAKE BIT(14) +#define ACPI_FADT_PLATFORM_CLOCK BIT(15) +#define ACPI_FADT_S4_RTC_VALID BIT(16) +#define ACPI_FADT_REMOTE_POWER_ON BIT(17) +#define ACPI_FADT_APIC_CLUSTER BIT(18) +#define ACPI_FADT_APIC_PHYSICAL BIT(19) +#define ACPI_FADT_HW_REDUCED_ACPI BIT(20) +#define ACPI_FADT_LOW_PWR_IDLE_S0 BIT(21) + +enum acpi_address_space_type { + ACPI_ADDRESS_SPACE_MEMORY = 0, /* System memory */ + ACPI_ADDRESS_SPACE_IO, /* System I/O */ + ACPI_ADDRESS_SPACE_PCI, /* PCI config space */ + ACPI_ADDRESS_SPACE_EC, /* Embedded controller */ + ACPI_ADDRESS_SPACE_SMBUS, /* SMBus */ + ACPI_ADDRESS_SPACE_PCC = 0x0a, /* Platform Comm. Channel */ + ACPI_ADDRESS_SPACE_FIXED = 0x7f /* Functional fixed hardware */ +}; + +enum acpi_address_space_size { + ACPI_ACCESS_SIZE_UNDEFINED = 0, + ACPI_ACCESS_SIZE_BYTE_ACCESS, + ACPI_ACCESS_SIZE_WORD_ACCESS, + ACPI_ACCESS_SIZE_DWORD_ACCESS, + ACPI_ACCESS_SIZE_QWORD_ACCESS +}; + +struct acpi_gen_regaddr { + u8 space_id; /* Address space ID */ + u8 bit_width; /* Register size in bits */ + u8 bit_offset; /* Register bit offset */ + u8 access_size; /* Access size */ + u32 addrl; /* Register address, low 32 bits */ + u32 addrh; /* Register address, high 32 bits */ +}; + +/* FADT (Fixed ACPI Description Table) */ +struct __packed acpi_fadt { + struct acpi_table_header header; + u32 firmware_ctrl; + u32 dsdt; + u8 res1; + u8 preferred_pm_profile; + u16 sci_int; + u32 smi_cmd; + u8 acpi_enable; + u8 acpi_disable; + u8 s4bios_req; + u8 pstate_cnt; + u32 pm1a_evt_blk; + u32 pm1b_evt_blk; + u32 pm1a_cnt_blk; + u32 pm1b_cnt_blk; + u32 pm2_cnt_blk; + u32 pm_tmr_blk; + u32 gpe0_blk; + u32 gpe1_blk; + u8 pm1_evt_len; + u8 pm1_cnt_len; + u8 pm2_cnt_len; + u8 pm_tmr_len; + u8 gpe0_blk_len; + u8 gpe1_blk_len; + u8 gpe1_base; + u8 cst_cnt; + u16 p_lvl2_lat; + u16 p_lvl3_lat; + u16 flush_size; + u16 flush_stride; + u8 duty_offset; + u8 duty_width; + u8 day_alrm; + u8 mon_alrm; + u8 century; + u16 iapc_boot_arch; + u8 res2; + u32 flags; + struct acpi_gen_regaddr reset_reg; + u8 reset_value; + u16 arm_boot_arch; + u8 minor_revision; + u32 x_firmware_ctl_l; + u32 x_firmware_ctl_h; + u32 x_dsdt_l; + u32 x_dsdt_h; + struct acpi_gen_regaddr x_pm1a_evt_blk; + struct acpi_gen_regaddr x_pm1b_evt_blk; + struct acpi_gen_regaddr x_pm1a_cnt_blk; + struct acpi_gen_regaddr x_pm1b_cnt_blk; + struct acpi_gen_regaddr x_pm2_cnt_blk; + struct acpi_gen_regaddr x_pm_tmr_blk; + struct acpi_gen_regaddr x_gpe0_blk; + struct acpi_gen_regaddr x_gpe1_blk; +}; + +/* FACS flags */ +#define ACPI_FACS_S4BIOS_F BIT(0) +#define ACPI_FACS_64BIT_WAKE_F BIT(1) + +/* FACS (Firmware ACPI Control Structure) */ +struct acpi_facs { + char signature[4]; /* "FACS" */ + u32 length; /* Length in bytes (>= 64) */ + u32 hardware_signature; /* Hardware signature */ + u32 firmware_waking_vector; /* Firmware waking vector */ + u32 global_lock; /* Global lock */ + u32 flags; /* FACS flags */ + u32 x_firmware_waking_vector_l; /* X FW waking vector, low */ + u32 x_firmware_waking_vector_h; /* X FW waking vector, high */ + u8 version; /* Version 2 */ + u8 res1[3]; + u32 ospm_flags; /* OSPM enabled flags */ + u8 res2[24]; +}; + +/* MADT flags */ +#define ACPI_MADT_PCAT_COMPAT BIT(0) + +/* MADT (Multiple APIC Description Table) */ +struct acpi_madt { + struct acpi_table_header header; + u32 lapic_addr; /* Local APIC address */ + u32 flags; /* Multiple APIC flags */ +}; + +/* MADT: APIC Structure Type*/ +enum acpi_apic_types { + ACPI_APIC_LAPIC = 0, /* Processor local APIC */ + ACPI_APIC_IOAPIC, /* I/O APIC */ + ACPI_APIC_IRQ_SRC_OVERRIDE, /* Interrupt source override */ + ACPI_APIC_NMI_SRC, /* NMI source */ + ACPI_APIC_LAPIC_NMI, /* Local APIC NMI */ + ACPI_APIC_LAPIC_ADDR_OVERRIDE, /* Local APIC address override */ + ACPI_APIC_IOSAPIC, /* I/O SAPIC */ + ACPI_APIC_LSAPIC, /* Local SAPIC */ + ACPI_APIC_PLATFORM_IRQ_SRC, /* Platform interrupt sources */ + ACPI_APIC_LX2APIC, /* Processor local x2APIC */ + ACPI_APIC_LX2APIC_NMI, /* Local x2APIC NMI */ +}; + +/* MADT: Processor Local APIC Structure */ + +#define LOCAL_APIC_FLAG_ENABLED BIT(0) + +struct acpi_madt_lapic { + u8 type; /* Type (0) */ + u8 length; /* Length in bytes (8) */ + u8 processor_id; /* ACPI processor ID */ + u8 apic_id; /* Local APIC ID */ + u32 flags; /* Local APIC flags */ +}; + +/* MADT: I/O APIC Structure */ +struct acpi_madt_ioapic { + u8 type; /* Type (1) */ + u8 length; /* Length in bytes (12) */ + u8 ioapic_id; /* I/O APIC ID */ + u8 reserved; + u32 ioapic_addr; /* I/O APIC address */ + u32 gsi_base; /* Global system interrupt base */ +}; + +/* MADT: Interrupt Source Override Structure */ +struct __packed acpi_madt_irqoverride { + u8 type; /* Type (2) */ + u8 length; /* Length in bytes (10) */ + u8 bus; /* ISA (0) */ + u8 source; /* Bus-relative int. source (IRQ) */ + u32 gsirq; /* Global system interrupt */ + u16 flags; /* MPS INTI flags */ +}; + +/* MADT: Local APIC NMI Structure */ +struct __packed acpi_madt_lapic_nmi { + u8 type; /* Type (4) */ + u8 length; /* Length in bytes (6) */ + u8 processor_id; /* ACPI processor ID */ + u16 flags; /* MPS INTI flags */ + u8 lint; /* Local APIC LINT# */ +}; + +/* MCFG (PCI Express MMIO config space BAR description table) */ +struct acpi_mcfg { + struct acpi_table_header header; + u8 reserved[8]; +}; + +struct acpi_mcfg_mmconfig { + u32 base_address_l; + u32 base_address_h; + u16 pci_segment_group_number; + u8 start_bus_number; + u8 end_bus_number; + u8 reserved[4]; +}; + +/* PM1_CNT bit defines */ +#define PM1_CNT_SCI_EN BIT(0) + +/* ACPI global NVS structure */ +struct acpi_global_nvs; + +/* CSRT (Core System Resource Table) */ +struct acpi_csrt { + struct acpi_table_header header; +}; + +struct acpi_csrt_group { + u32 length; + u32 vendor_id; + u32 subvendor_id; + u16 device_id; + u16 subdevice_id; + u16 revision; + u16 reserved; + u32 shared_info_length; +}; + +struct acpi_csrt_shared_info { + u16 major_version; + u16 minor_version; + u32 mmio_base_low; + u32 mmio_base_high; + u32 gsi_interrupt; + u8 interrupt_polarity; + u8 interrupt_mode; + u8 num_channels; + u8 dma_address_width; + u16 base_request_line; + u16 num_handshake_signals; + u32 max_block_size; +}; + +/* DBG2 definitions are partially used for SPCR interface_type */ + +/* Types for port_type field */ + +#define ACPI_DBG2_SERIAL_PORT 0x8000 +#define ACPI_DBG2_1394_PORT 0x8001 +#define ACPI_DBG2_USB_PORT 0x8002 +#define ACPI_DBG2_NET_PORT 0x8003 + +/* Subtypes for port_subtype field */ + +#define ACPI_DBG2_16550_COMPATIBLE 0x0000 +#define ACPI_DBG2_16550_SUBSET 0x0001 +#define ACPI_DBG2_ARM_PL011 0x0003 +#define ACPI_DBG2_ARM_SBSA_32BIT 0x000D +#define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E +#define ACPI_DBG2_ARM_DCC 0x000F +#define ACPI_DBG2_BCM2835 0x0010 + +#define ACPI_DBG2_1394_STANDARD 0x0000 + +#define ACPI_DBG2_USB_XHCI 0x0000 +#define ACPI_DBG2_USB_EHCI 0x0001 + +#define ACPI_DBG2_UNKNOWN 0x00FF + +/* SPCR (Serial Port Console Redirection table) */ +struct __packed acpi_spcr { + struct acpi_table_header header; + u8 interface_type; + u8 reserved[3]; + struct acpi_gen_regaddr serial_port; + u8 interrupt_type; + u8 pc_interrupt; + u32 interrupt; /* Global system interrupt */ + u8 baud_rate; + u8 parity; + u8 stop_bits; + u8 flow_control; + u8 terminal_type; + u8 reserved1; + u16 pci_device_id; /* Must be 0xffff if not PCI device */ + u16 pci_vendor_id; /* Must be 0xffff if not PCI device */ + u8 pci_bus; + u8 pci_device; + u8 pci_function; + u32 pci_flags; + u8 pci_segment; + u32 reserved2; +}; + +#include + +#endif /* __ACPI_TABLE_H__ */ -- cgit From 89c2798f1f2f690cdd269e38ef386ff720435816 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:37 -0600 Subject: acpi: Add an __ACPI__ preprocessor symbol The ASL compiler cannot handle C structures and the like so needs some sort of header guard around these. We already have an __ASSEMBLY__ #define but it seems best to create a new one for ACPI since the rules may be different. Add the check to a few files that ACPI always includes. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Wolfgang Wallner --- include/acpi/acpi_table.h | 4 ++++ include/dm/acpi.h | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'include') diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h index b4404a632c..dd74895813 100644 --- a/include/acpi/acpi_table.h +++ b/include/acpi/acpi_table.h @@ -21,6 +21,8 @@ #define ACPI_RSDP_REV_ACPI_1_0 0 #define ACPI_RSDP_REV_ACPI_2_0 2 +#if !defined(__ACPI__) + /* * RSDP (Root System Description Pointer) * Note: ACPI 1.0 didn't have length, xsdt_address, and ext_checksum @@ -389,6 +391,8 @@ struct __packed acpi_spcr { u32 reserved2; }; +#endif /* !__ACPI__*/ + #include #endif /* __ACPI_TABLE_H__ */ diff --git a/include/dm/acpi.h b/include/dm/acpi.h index ba0813fa21..49257914ff 100644 --- a/include/dm/acpi.h +++ b/include/dm/acpi.h @@ -22,6 +22,8 @@ /* Length of an ACPI name string including nul terminator */ #define ACPI_NAME_MAX (ACPI_NAME_LEN + 1) +#if !defined(__ACPI__) + /** * struct acpi_ops - ACPI operations supported by driver model */ @@ -70,4 +72,6 @@ int acpi_get_name(const struct udevice *dev, char *out_name); */ int acpi_copy_name(char *out_name, const char *name); +#endif /* __ACPI__ */ + #endif -- cgit From 91fe8b79f6912ab7622169bc1673e2df222e0b57 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:38 -0600 Subject: acpi: Add a central location for table version numbers Each ACPI table has its own version number. Add the version numbers in a single function so we can keep them consistent and easily see what versions are supported. Start a new acpi_table file in a generic directory to house this function. We can move things over to this file from x86 as needed. Signed-off-by: Simon Glass Reviewed-by: Wolfgang Wallner Reviewed-by: Bin Meng --- include/acpi/acpi_table.h | 60 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'include') diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h index dd74895813..fdd7682c89 100644 --- a/include/acpi/acpi_table.h +++ b/include/acpi/acpi_table.h @@ -202,6 +202,26 @@ struct __packed acpi_fadt { struct acpi_gen_regaddr x_gpe1_blk; }; +/* FADT TABLE Revision values - note these do not match the ACPI revision */ +#define ACPI_FADT_REV_ACPI_1_0 1 +#define ACPI_FADT_REV_ACPI_2_0 3 +#define ACPI_FADT_REV_ACPI_3_0 4 +#define ACPI_FADT_REV_ACPI_4_0 4 +#define ACPI_FADT_REV_ACPI_5_0 5 +#define ACPI_FADT_REV_ACPI_6_0 6 + +/* MADT TABLE Revision values - note these do not match the ACPI revision */ +#define ACPI_MADT_REV_ACPI_3_0 2 +#define ACPI_MADT_REV_ACPI_4_0 3 +#define ACPI_MADT_REV_ACPI_5_0 3 +#define ACPI_MADT_REV_ACPI_6_0 5 + +#define ACPI_MCFG_REV_ACPI_3_0 1 + +/* IVRS Revision Field */ +#define IVRS_FORMAT_FIXED 0x01 /* Type 10h & 11h only */ +#define IVRS_FORMAT_MIXED 0x02 /* Type 10h, 11h, & 40h */ + /* FACS flags */ #define ACPI_FACS_S4BIOS_F BIT(0) #define ACPI_FACS_64BIT_WAKE_F BIT(1) @@ -391,6 +411,46 @@ struct __packed acpi_spcr { u32 reserved2; }; +/* Tables defined/reserved by ACPI and generated by U-Boot */ +enum acpi_tables { + ACPITAB_BERT, + ACPITAB_DBG2, + ACPITAB_DMAR, + ACPITAB_DSDT, + ACPITAB_ECDT, + ACPITAB_FACS, + ACPITAB_FADT, + ACPITAB_HEST, + ACPITAB_HPET, + ACPITAB_IVRS, + ACPITAB_MADT, + ACPITAB_MCFG, + ACPITAB_NHLT, + ACPITAB_RSDP, + ACPITAB_RSDT, + ACPITAB_SLIT, + ACPITAB_SPCR, + ACPITAB_SPMI, + ACPITAB_SRAT, + ACPITAB_SSDT, + ACPITAB_TCPA, + ACPITAB_TPM2, + ACPITAB_VFCT, + ACPITAB_XSDT, + + ACPITAB_COUNT, +}; + +/** + * acpi_get_table_revision() - Get the revision number generated for a table + * + * This keeps the version-number information in one place + * + * @table: ACPI table to check + * @return version number that U-Boot generates + */ +int acpi_get_table_revision(enum acpi_tables table); + #endif /* !__ACPI__*/ #include -- cgit From bfeb5d460cd129e037c87e9d90b02808d68c0147 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:39 -0600 Subject: acpi: Add support for DMAR The DMA Remapping Reporting (DMAR) table contains information about DMA remapping. Add a version simple version of this table with only the minimum fields filled out. i.e. no entries. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Wolfgang Wallner --- include/acpi/acpi_table.h | 54 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'include') diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h index fdd7682c89..194be9aa58 100644 --- a/include/acpi/acpi_table.h +++ b/include/acpi/acpi_table.h @@ -360,6 +360,51 @@ struct acpi_csrt_shared_info { u32 max_block_size; }; +enum dmar_type { + DMAR_DRHD = 0, + DMAR_RMRR = 1, + DMAR_ATSR = 2, + DMAR_RHSA = 3, + DMAR_ANDD = 4 +}; + +enum { + DRHD_INCLUDE_PCI_ALL = BIT(0) +}; + +enum dmar_flags { + DMAR_INTR_REMAP = BIT(0), + DMAR_X2APIC_OPT_OUT = BIT(1), + DMAR_CTRL_PLATFORM_OPT_IN_FLAG = BIT(2), +}; + +struct dmar_entry { + u16 type; + u16 length; + u8 flags; + u8 reserved; + u16 segment; + u64 bar; +}; + +struct dmar_rmrr_entry { + u16 type; + u16 length; + u16 reserved; + u16 segment; + u64 bar; + u64 limit; +}; + +/* DMAR (DMA Remapping Reporting Structure) */ +struct __packed acpi_dmar { + struct acpi_table_header header; + u8 host_address_width; + u8 flags; + u8 reserved[10]; + struct dmar_entry structure[0]; +}; + /* DBG2 definitions are partially used for SPCR interface_type */ /* Types for port_type field */ @@ -451,6 +496,15 @@ enum acpi_tables { */ int acpi_get_table_revision(enum acpi_tables table); +/** + * acpi_create_dmar() - Create a DMA Remapping Reporting (DMAR) table + * + * @dmar: Place to put the table + * @flags: DMAR flags to use + * @return 0 if OK, -ve on error + */ +int acpi_create_dmar(struct acpi_dmar *dmar, enum dmar_flags flags); + #endif /* !__ACPI__*/ #include -- cgit From 1f4431e46120ef913fc9f83c78a734d910d00b3f Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 8 Apr 2020 16:57:40 -0600 Subject: test: Add hexdump.h to the unit test header Since ut_asserteq_mem() uses bin2hex() we should include this header in ut.h to avoid errors. Add it. Signed-off-by: Simon Glass Reviewed-by: Wolfgang Wallner --- include/test/ut.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/test/ut.h b/include/test/ut.h index 04df8ba3af..39d15953ed 100644 --- a/include/test/ut.h +++ b/include/test/ut.h @@ -8,6 +8,7 @@ #ifndef __TEST_UT_H #define __TEST_UT_H +#include #include struct unit_test_state; -- cgit