From 6b0ccc3b456bcec534620aac93427e4a2207a66a Mon Sep 17 00:00:00 2001 From: Heiko Schocher <[hs@denx.de]> Date: Wed, 20 Oct 2010 19:33:26 +0530 Subject: arm926ejs, suen3: fix relocation issues - use internal 2k security SRAM as RAM for early stack. - do early inits in board_init_f() Signed-off-by: Heiko Schocher Cc: Prafulla Wadaskar --- include/configs/km_arm.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index faa0f50326..4b706f1f44 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -182,6 +182,8 @@ int get_scl (void); /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR (0x00000000 + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) +/* Kirkwood has 2k of Security SRAM, use it for SP */ +#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 +/* Do early setups now in board_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F #endif /* _CONFIG_KM_ARM_H */ -- cgit From 754ae3fbb76dc429ef932bbd04b432196efe45ff Mon Sep 17 00:00:00 2001 From: Prafulla Wadaskar Date: Wed, 20 Oct 2010 20:12:27 +0530 Subject: Kirkwood: bugfix: broken early console messages It has been observed that, the complete u-boot banner does not appear on the console when the system is booted from NAND/NOR/SPI flash. This patch fixes this issue on all Marvell boards by adding board_early_init_f() support Signed-off-by: Prafulla Wadaskar --- include/configs/mv-common.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index bdcebd3b5d..2b19a34bb2 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -142,6 +142,7 @@ #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ -- cgit From 5842383e25910636d2e9a722f0ef1a2ec7951b36 Mon Sep 17 00:00:00 2001 From: Gray Remlin <[g_remlin@rocketmail.com]> Date: Thu, 28 Oct 2010 19:02:12 +0530 Subject: kirkwood: guruplug: Relocate NAND environment area Current default options increase u-boot size to overlap the location of the environment in NAND, move environment higher up Signed-off-by: Gray Remlin --- include/configs/guruplug.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 2c2682cfad..f449da9354 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -72,8 +72,8 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */ +#define CONFIG_ENV_ADDR 0x60000 +#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ /* * Default environment variables -- cgit From 31d80c77ff672e0202b4ada5215c4666c949ffc2 Mon Sep 17 00:00:00 2001 From: Prafulla Wadaskar Date: Wed, 27 Oct 2010 17:46:06 +0530 Subject: kirkwood: get rid of config.mk files After moving the definition of CONFIG_SYS_TEXT_BASE to the respective board config files, all Marvell kirkwood board have just a single and common entry in their config.mk files: KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg Replace the only reference to KWD_CONFIG in the top level Makefile by an equivalent setting, and remove all kirkwood config.mk files. Signed-off-by: Wolfgang Denk Cc: Prafulla Wadaskar Cc: Siddarth Gore Cc: Simon Kagstrom Cc: Heiko Schocher Cc: Eric Cooper Acked-by: Wolfgang Denk Signed-off-by: Prafulla Wadaskar --- include/configs/keymile-common.h | 16 ++++++++++++++++ include/configs/mv-common.h | 16 ++++++++++++++++ 2 files changed, 32 insertions(+) (limited to 'include') diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 62d21f6286..ccc71c96c0 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -29,6 +29,22 @@ #define CONFIG_BOOTCOUNT_LIMIT +/* + * By default kwbimage.cfg from board specific folder is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* + * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x00400000 +#endif /* CONFIG_SYS_TEXT_BASE */ + /* * Command line configuration. */ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 2b19a34bb2..e4a81489cf 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -45,6 +45,22 @@ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ +/* + * By default kwbimage.cfg from board specific folder is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* + * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x00600000 +#endif /* CONFIG_SYS_TEXT_BASE */ + #define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE #define MV_UART0_BASE KW_UART0_BASE #define MV_SATA_BASE KW_SATA_BASE -- cgit