From 61c0d6ae777b684a5bb876dadd14d548625d27c7 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 26 Sep 2012 15:20:33 -0700 Subject: gth2: Remove this platform After taking with the former maintainer, delete this platform. The patch is from the former maintainer. Signed-off-by: Tom Rini --- include/configs/gth2.h | 222 ------------------------------------------------- 1 file changed, 222 deletions(-) delete mode 100644 include/configs/gth2.h (limited to 'include/configs') diff --git a/include/configs/gth2.h b/include/configs/gth2.h deleted file mode 100644 index 76e911a982..0000000000 --- a/include/configs/gth2.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * (C) Copyright 2005 - * Thomas.Lange@corelatus.se - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This file contains the configuration parameters for the gth2 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ -#define CONFIG_GTH2 1 -#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ - -#define CONFIG_SOC_AU1000 1 - -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */ - -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ - -#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */ - -#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */ - -#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */ - -#define CONFIG_BAUDRATE 115200 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* Only interrupt boot if space is pressed */ -/* If a long serial cable is connected but */ -/* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press space to abort autoboot in %d second\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTARGS "panic=1" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addmisc=setenv bootargs $(bootargs) " \ - "ethaddr=$(ethaddr) \0" \ - "netboot=bootp;run addmisc;bootm\0" \ - "" - -/* Boot from Compact flash partition 2 as default */ -#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_IDE -#define CONFIG_CMD_DHCP - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_SOURCE - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "GTH2 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MHZ 500 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) - -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ - -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80100000 -#define CONFIG_SYS_MEMTEST_END 0x83000000 - -#define CONFIG_HW_WATCHDOG 1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -/* We boot from this flash, selected with dip switch */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_NOWHERE 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xB0030000 -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_FLASH_16BIT - -#define CONFIG_NR_DRAM_BANKS 2 - - -#define CONFIG_MEMSIZE_IN_BYTES - -/*---ATA PCMCIA ------------------------------------*/ -#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ - -#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 -#define CONFIG_SYS_PCMCIA_IO_BASE 0x28000000 -#define CONFIG_SYS_PCMCIA_ATTR_BASE 0x30000000 - -#define CONFIG_PCMCIA_SLOT_A - -#define CONFIG_ATAPI 1 -#define CONFIG_MAC_PARTITION 1 - -/* We run CF in "true ide" mode or a harddrive via pcmcia */ -#define CONFIG_IDE_PCMCIA 1 - -/* We only support one slot for now */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_IO_BASE - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0 - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 32 - -#define GPIO_CACONFIG (1<<0) -#define GPIO_DPACONFIG (1<<6) -#define GPIO_ERESET (1<<11) -#define GPIO_EEDQ (1<<17) -#define GPIO_WDI (1<<18) -#define GPIO_RJ1LY (1<<22) -#define GPIO_RJ1LG (1<<23) -#define GPIO_LEDCLK (1<<29) -#define GPIO_LEDD (1<<30) -#define GPIO_CPU_LED (1<<31) - -#endif /* __CONFIG_H */ -- cgit