From b9a1609915f68bad51b15cb12546723519a9be41 Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Thu, 1 Oct 2015 22:48:04 +0200 Subject: tbs2910: explicitly set boot address Set missing boot address in bootm command. This fixes the error: Wrong Image Format for bootm command ERROR: can't get kernel image! Reported-by: Uwe Scheffler Signed-off-by: Soeren Moch Tested-by: Uwe Scheffler --- include/configs/tbs2910.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/configs/tbs2910.h') diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 70b440340f..4534695598 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -190,7 +190,7 @@ "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ "rdinit=/sbin/init enable_wait_mode=off\0" \ "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ - "mmc read 0x10800000 0x800 0x4000; bootm\0" \ + "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \ "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ "run bootargs_upd; " \ -- cgit