From fe8f7066d394d72ff96f4b8e5988407da149e462 Mon Sep 17 00:00:00 2001 From: Ajay Bhargav Date: Wed, 5 Oct 2011 03:13:23 +0000 Subject: mmc: CMD7:MMC_CMD_SELECT_CARD response fix As per JEDEC document JESD84-A441 (page 105) response for CMD7 (MMC_CMD_SELECT_CARD) response should be R1 instead of R1b. In uboot we never take MMC to disconnected state and on powerup its always ideal state which later goes to stand-by state. from document footnote: R1 while selecting from Stand-By State to Transfer State; R1b while selecting from Disconnected State to Programming State. Signed-off-by: Ajay Bhargav --- drivers/mmc/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 96facb7659..37ce6e85a1 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -988,7 +988,7 @@ int mmc_startup(struct mmc *mmc) /* Select the card, and put it into Transfer Mode */ if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ cmd.cmdidx = MMC_CMD_SELECT_CARD; - cmd.resp_type = MMC_RSP_R1b; + cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); -- cgit