From c4ea142424fc5cb43a2db750cb772e84304e5fb8 Mon Sep 17 00:00:00 2001
From: Stefano Babic <sbabic@denx.de>
Date: Tue, 6 Jul 2010 17:05:06 +0200
Subject: Use common function to set GPIOs for MX3 and MX5

The patch adds support for setting gpios to the
MX51 processor and change name to the corresponding
functions for MX31. In this way, it is possible to get rid
of nasty #ifdef switches related to the processor type.

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 drivers/spi/mxc_spi.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/spi')

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index e15a63caca..802cd2efb0 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,6 +23,7 @@
 #include <spi.h>
 #include <asm/errno.h>
 #include <asm/io.h>
+#include <mxc_gpio.h>
 
 #ifdef CONFIG_MX27
 /* i.MX27 has a completely wrong register layout and register definitions in the
@@ -68,9 +69,6 @@ static unsigned long spi_bases[] = {
 	0x53f84000,
 };
 
-#define OUT	MX31_GPIO_DIRECTION_OUT
-#define mxc_gpio_direction	mx31_gpio_direction
-#define mxc_gpio_set		mx31_gpio_set
 #elif defined(CONFIG_MX51)
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
@@ -111,13 +109,12 @@ static unsigned long spi_bases[] = {
 	CSPI2_BASE_ADDR,
 	CSPI3_BASE_ADDR,
 };
-#define mxc_gpio_direction(gpio, dir)	(0)
-#define mxc_gpio_set(gpio, value)	{}
-#define OUT	1
 #else
 #error "Unsupported architecture"
 #endif
 
+#define OUT	MXC_GPIO_DIRECTION_OUT
+
 struct mxc_spi_slave {
 	struct spi_slave slave;
 	unsigned long	base;
@@ -126,6 +123,7 @@ struct mxc_spi_slave {
 	u32		cfg_reg;
 #endif
 	int		gpio;
+	int		ss_pol;
 };
 
 static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
@@ -147,7 +145,7 @@ void spi_cs_activate(struct spi_slave *slave)
 {
 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
 	if (mxcs->gpio > 0)
-		mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+		mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
@@ -155,7 +153,7 @@ void spi_cs_deactivate(struct spi_slave *slave)
 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
 	if (mxcs->gpio > 0)
 		mxc_gpio_set(mxcs->gpio,
-			      !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+			      !(mxcs->ss_pol));
 }
 
 #ifdef CONFIG_MX51
@@ -394,6 +392,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	mxcs->slave.bus = bus;
 	mxcs->slave.cs = cs;
 	mxcs->base = spi_bases[bus];
+	mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
 
 #ifdef CONFIG_MX51
 	/* Can be used for i.MX31 too ? */
-- 
cgit