From c1a3f1ee180fe2c17c98577906cdeb39d25724f0 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Apr 2019 01:58:53 +0530 Subject: spi: mpc8xxx: Convert to DM Support DM in the MPC8xxx SPI driver, and remove the legacy SPI interface. Signed-off-by: Mario Six Signed-off-by: Jagan Teki --- drivers/spi/mpc8xxx_spi.c | 144 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 107 insertions(+), 37 deletions(-) (limited to 'drivers/spi/mpc8xxx_spi.c') diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index 63e1a150f8..1c7bf10f91 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -5,10 +5,12 @@ */ #include - +#include +#include #include #include #include +#include enum { SPI_EV_NE = BIT(31 - 22), /* Receiver Not Empty */ @@ -30,6 +32,12 @@ enum { SPI_COM_LST = BIT(31 - 9), }; +struct mpc8xxx_priv { + spi8xxx_t *spi; + struct gpio_desc gpios[16]; + int max_cs; +}; + static inline u32 to_prescale_mod(u32 val) { return (min(val, (u32)15) << 16); @@ -42,70 +50,90 @@ static void set_char_len(spi8xxx_t *spi, u32 val) #define SPI_TIMEOUT 1000 -struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode) +static int __spi_set_speed(spi8xxx_t *spi, uint speed) { - struct spi_slave *slave; + /* TODO(mario.six@gdsys.cc): This only ever sets one fixed speed */ - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - slave = spi_alloc_slave_base(bus, cs); - if (!slave) - return NULL; - - /* - * TODO: Some of the code in spi_init() should probably move - * here, or into spi_claim_bus() below. - */ + /* Use SYSCLK / 8 (16.67MHz typ.) */ + clrsetbits_be32(&spi->mode, SPI_MODE_PM_MASK, to_prescale_mod(1)); - return slave; + return 0; } -void spi_free_slave(struct spi_slave *slave) +static int mpc8xxx_spi_ofdata_to_platdata(struct udevice *dev) { - free(slave); + struct mpc8xxx_priv *priv = dev_get_priv(dev); + int ret; + + priv->spi = (spi8xxx_t *)dev_read_addr(dev); + + /* TODO(mario.six@gdsys.cc): Read clock and save the value */ + + ret = gpio_request_list_by_name(dev, "gpios", priv->gpios, + ARRAY_SIZE(priv->gpios), GPIOD_IS_OUT | GPIOD_ACTIVE_LOW); + if (ret < 0) + return -EINVAL; + + priv->max_cs = ret; + + return 0; } -void spi_init(void) +static int mpc8xxx_spi_probe(struct udevice *dev) { - spi8xxx_t *spi = &((immap_t *)(CONFIG_SYS_IMMR))->spi; + struct mpc8xxx_priv *priv = dev_get_priv(dev); /* * SPI pins on the MPC83xx are not muxed, so all we do is initialize * some registers */ - out_be32(&spi->mode, SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN); - /* Use SYSCLK / 8 (16.67MHz typ.) */ - clrsetbits_be32(&spi->mode, SPI_MODE_PM_MASK, to_prescale_mod(1)); + out_be32(&priv->spi->mode, SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN); + + __spi_set_speed(priv->spi, 16666667); + /* Clear all SPI events */ - setbits_be32(&spi->event, 0xffffffff); + setbits_be32(&priv->spi->event, 0xffffffff); /* Mask all SPI interrupts */ - clrbits_be32(&spi->mask, 0xffffffff); + clrbits_be32(&priv->spi->mask, 0xffffffff); /* LST bit doesn't do anything, so disregard */ - out_be32(&spi->com, 0); + out_be32(&priv->spi->com, 0); + + return 0; } -int spi_claim_bus(struct spi_slave *slave) +static void mpc8xxx_spi_cs_activate(struct udevice *dev) { - return 0; + struct mpc8xxx_priv *priv = dev_get_priv(dev->parent); + struct dm_spi_slave_platdata *platdata = dev_get_parent_platdata(dev); + + dm_gpio_set_dir_flags(&priv->gpios[platdata->cs], GPIOD_IS_OUT); + dm_gpio_set_value(&priv->gpios[platdata->cs], 0); } -void spi_release_bus(struct spi_slave *slave) +static void mpc8xxx_spi_cs_deactivate(struct udevice *dev) { + struct mpc8xxx_priv *priv = dev_get_priv(dev->parent); + struct dm_spi_slave_platdata *platdata = dev_get_parent_platdata(dev); + + dm_gpio_set_dir_flags(&priv->gpios[platdata->cs], GPIOD_IS_OUT); + dm_gpio_set_value(&priv->gpios[platdata->cs], 1); } -int spi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, void *din, - ulong flags) +static int mpc8xxx_spi_xfer(struct udevice *dev, uint bitlen, + const void *dout, void *din, ulong flags) { - spi8xxx_t *spi = &((immap_t *)(CONFIG_SYS_IMMR))->spi; - u32 tmpdin; + struct udevice *bus = dev->parent; + struct mpc8xxx_priv *priv = dev_get_priv(bus); + spi8xxx_t *spi = priv->spi; + struct dm_spi_slave_platdata *platdata = dev_get_parent_platdata(dev); + u32 tmpdin = 0; int num_blks = DIV_ROUND_UP(bitlen, 32); - debug("%s: slave %u:%u dout %08X din %08X bitlen %u\n", __func__, - slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen); + debug("%s: slave %s:%u dout %08X din %08X bitlen %u\n", __func__, + bus->name, platdata->cs, *(uint *)dout, *(uint *)din, bitlen); if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + mpc8xxx_spi_cs_activate(dev); /* Clear all SPI events */ setbits_be32(&spi->event, 0xffffffff); @@ -178,15 +206,57 @@ int spi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, void *din, mdelay(1); } while (get_timer(start) < SPI_TIMEOUT); - if (get_timer(start) >= SPI_TIMEOUT) + if (get_timer(start) >= SPI_TIMEOUT) { debug("*** %s: Time out during SPI transfer\n", __func__); + return -ETIMEDOUT; + } debug("*** %s: transfer ended. Value=%08x\n", __func__, tmpdin); } if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + mpc8xxx_spi_cs_deactivate(dev); + + return 0; +} + +static int mpc8xxx_spi_set_speed(struct udevice *dev, uint speed) +{ + struct mpc8xxx_priv *priv = dev_get_priv(dev); + + return __spi_set_speed(priv->spi, speed); +} +static int mpc8xxx_spi_set_mode(struct udevice *dev, uint mode) +{ + /* TODO(mario.six@gdsys.cc): Using SPI_CPHA (for clock phase) and + * SPI_CPOL (for clock polarity) should work + */ return 0; } + +static const struct dm_spi_ops mpc8xxx_spi_ops = { + .xfer = mpc8xxx_spi_xfer, + .set_speed = mpc8xxx_spi_set_speed, + .set_mode = mpc8xxx_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id mpc8xxx_spi_ids[] = { + { .compatible = "fsl,spi" }, + { } +}; + +U_BOOT_DRIVER(mpc8xxx_spi) = { + .name = "mpc8xxx_spi", + .id = UCLASS_SPI, + .of_match = mpc8xxx_spi_ids, + .ops = &mpc8xxx_spi_ops, + .ofdata_to_platdata = mpc8xxx_spi_ofdata_to_platdata, + .probe = mpc8xxx_spi_probe, + .priv_auto_alloc_size = sizeof(struct mpc8xxx_priv), +}; -- cgit