From 213ac73e2caff8b477c31f85d8132f8cc116f366 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Tue, 28 Dec 2010 17:47:25 -0600 Subject: fsl_pci: Update PCIe boot ouput This change does the following: - Adds printing of negotiated link width. This information can be useful when debugging PCIe issues. - Makes it optional for boards to implement board_serdes_name(). Previously boards that did not implement it would print unsightly output such as "PCIE1: Connected to ..." - Rewords the PCIe boot output to reduce line length and to make it clear that the "base address XYZ" value refers to the base address of the internal processor PCIe registers and not a standard PCI BAR value. - Changes "PCIE" output to the standard "PCIe" Before change: PCIE1: connected to as Root Complex (base addr ef008000) 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 05 PCIE2: connected to as Endpoint (base addr ef009000) PCIE2: Bus 06 - 06 After change: PCIe1: Root Complex of PEX8518 Switch, x4, regs @ 0xef008000 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device PCIe1: Bus 00 - 05 PCIe2: Endpoint of VPX Fabric A, x2, regs @ 0xef009000 PCIe2: Bus 06 - 06 Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- drivers/pci/fsl_pci_init.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers/pci/fsl_pci_init.c') diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index d7623369fe..6c168c141c 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -217,8 +217,10 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, return 1; } -void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) +void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) { + u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr; + u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data; u16 temp16; u32 temp32; int enabled, r, inbound = 0; @@ -235,10 +237,6 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) u64 out_hi = 0, out_lo = -1ULL; u32 pcicsrbar, pcicsrbar_sz; -#ifdef DEBUG - int neg_link_w; -#endif - pci_setup_indirect(hose, cfg_addr, cfg_data); /* Handle setup of outbound windows first */ @@ -354,20 +352,20 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) #endif if (!enabled) { - debug("....PCIE link error. Skipping scan." - "LTSSM=0x%02x\n", ltssm); + /* Let the user know there's no PCIe link */ + printf("no link, regs @ 0x%lx\n", pci_info->regs); hose->last_busno = hose->first_busno; return; } out_be32(&pci->pme_msg_det, 0xffffffff); out_be32(&pci->pme_msg_int_en, 0xffffffff); -#ifdef DEBUG + + /* Print the negotiated PCIe link width */ pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16); - neg_link_w = (temp16 & 0x3f0 ) >> 4; - printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n", - ltssm, neg_link_w); -#endif + printf("x%d, regs @ 0x%lx\n", (temp16 & 0x3f0 ) >> 4, + pci_info->regs); + hose->current_busno++; /* Start scan with secondary */ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); } @@ -476,7 +474,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, hose->region_count = r - hose->regions; hose->first_busno = busno; - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); + fsl_pci_init(hose, pci_info); if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); @@ -485,7 +483,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? - "E" : "", pci_info->pci_num, + "e" : "", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1); @@ -525,10 +523,14 @@ int fsl_configure_pcie(struct fsl_pci_info *info, set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); + is_endpoint = fsl_setup_hose(hose, info->regs); - printf("PCIE%u: connected to %s as %s (base addr %lx)\n", - info->pci_num, connected, - is_endpoint ? "Endpoint" : "Root Complex", info->regs); + printf("PCIe%u: %s", info->pci_num, + is_endpoint ? "Endpoint" : "Root Complex"); + if (connected) + printf(" of %s", connected); + puts(", "); + return fsl_pci_init_port(info, hose, busno); } @@ -606,7 +608,7 @@ int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, busno = fsl_configure_pcie(pci_info, hose, board_serdes_name(dev), busno); } else { - printf("PCIE%d: disabled\n", num + 1); + printf("PCIe%d: disabled\n", num + 1); } return busno; -- cgit