From 3c5c4ee35f58bd9d3ca8fb2b4d31da4e5abe17f1 Mon Sep 17 00:00:00 2001 From: Amit Singh Tomar Date: Sat, 9 May 2020 19:55:12 +0530 Subject: net: designware: s700: Add glue code for S700 mac This patchs adds glue logic to enable designware mac present on Action Semi based S700 SoC, Configures SoC specific bits. Undocumented bit that programs the PHY interface select register comes from vendor source. It has been tested on Cubieboard7-lite based on S700 SoC. Signed-off-by: Amit Singh Tomar --- drivers/net/dwmac_s700.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 drivers/net/dwmac_s700.c (limited to 'drivers/net/dwmac_s700.c') diff --git a/drivers/net/dwmac_s700.c b/drivers/net/dwmac_s700.c new file mode 100644 index 0000000000..9d3f3ac5d9 --- /dev/null +++ b/drivers/net/dwmac_s700.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Amit Singh Tomar + * + * Actions DWMAC specific glue layer + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "designware.h" +#include +#include + +/* pin control for MAC */ +#define RMII_TXD01_MFP_CTL0 (0x0 << 16) +#define RMII_RXD01_MFP_CTL0 (0x0 << 8) +#define RMII_TXEN_TXER_MFP_CTL0 (0x0 << 13) +#define RMII_REF_CLK_MFP_CTL0 (0x0 << 6) +#define CLKO_25M_EN_MFP_CTL3 BIT(30) + +DECLARE_GLOBAL_DATA_PTR; + +static void dwmac_board_setup(void) +{ + clrbits_le32(MFP_CTL0, (RMII_TXD01_MFP_CTL0 | RMII_RXD01_MFP_CTL0 | + RMII_TXEN_TXER_MFP_CTL0 | RMII_REF_CLK_MFP_CTL0)); + + setbits_le32(MFP_CTL3, CLKO_25M_EN_MFP_CTL3); +} + +static int dwmac_s700_probe(struct udevice *dev) +{ + dwmac_board_setup(); + + /* This is undocumented, phy interface select register */ + writel(0x4, 0xe024c0a0); + + return designware_eth_probe(dev); +} + +static int dwmac_s700_ofdata_to_platdata(struct udevice *dev) +{ + return designware_eth_ofdata_to_platdata(dev); +} + +static const struct udevice_id dwmac_s700_ids[] = { + {.compatible = "actions,s700-ethernet"}, + { } +}; + +U_BOOT_DRIVER(dwmac_s700) = { + .name = "dwmac_s700", + .id = UCLASS_ETH, + .of_match = dwmac_s700_ids, + .ofdata_to_platdata = dwmac_s700_ofdata_to_platdata, + .probe = dwmac_s700_probe, + .ops = &designware_eth_ops, + .priv_auto_alloc_size = sizeof(struct dw_eth_dev), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; -- cgit