From b48e3b04101eaae7a40107c447ed377561021997 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 25 Nov 2013 10:34:26 -0200 Subject: mx6sabresd: Fix wrong colors in LVDS splash Currently HDMI splash screen is selected by default on mx6sabresd boards. As LVDS is also enabled, this causes incorrect colors to be displayed im the LVDS panel. Fix this by selecting the LVDS panel as the default splash output and only keep HDMI or LVDS turned on at the same time. Acked-by: Liu Ying Signed-off-by: Fabio Estevam --- board/freescale/mx6sabresd/mx6sabresd.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'board') diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 1ecedaccd1..db9fdff92d 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -249,8 +249,22 @@ static int detect_hdmi(struct display_info_t const *dev) return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT; } + +static void disable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + int reg = readl(&iomux->gpr[2]); + + reg &= ~(IOMUXC_GPR2_LVDS_CH0_MODE_MASK | + IOMUXC_GPR2_LVDS_CH1_MODE_MASK); + + writel(reg, &iomux->gpr[2]); +} + static void do_enable_hdmi(struct display_info_t const *dev) { + disable_lvds(dev); imx_enable_hdmi_phy(); } @@ -263,14 +277,15 @@ static void enable_lvds(struct display_info_t const *dev) IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT; writel(reg, &iomux->gpr[2]); } + static struct display_info_t const displays[] = {{ .bus = -1, .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_hdmi, - .enable = do_enable_hdmi, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = NULL, + .enable = enable_lvds, .mode = { - .name = "HDMI", + .name = "Hannstar-XGA", .refresh = 60, .xres = 1024, .yres = 768, @@ -286,11 +301,11 @@ static struct display_info_t const displays[] = {{ } }, { .bus = -1, .addr = 0, - .pixfmt = IPU_PIX_FMT_LVDS666, - .detect = NULL, - .enable = enable_lvds, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = do_enable_hdmi, .mode = { - .name = "Hannstar-XGA", + .name = "HDMI", .refresh = 60, .xres = 1024, .yres = 768, -- cgit