From 258c98f8d36ef35d7cb7604847ba73e64d702c2a Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 27 Jan 2015 10:14:04 +0800 Subject: imx:mx6 set normal APS and standby PFM mode To normal mode, use APS switching mode. To standy mode, use PFM switching mode. Signed-off-by: Peng Fan Acked-by: Przemyslaw Marczak --- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 6 ++++++ board/freescale/mx6sabresd/mx6sabresd.c | 6 +++++- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 6 +++++- 3 files changed, 16 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index a90360f2df..b76e4eb528 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "../common/pfuze.h" DECLARE_GLOBAL_DATA_PTR; @@ -494,11 +495,16 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) int power_init_board(void) { struct pmic *p; + unsigned int ret; p = pfuze_common_init(I2C_PMIC); if (!p) return -ENODEV; + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + return 0; } diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 2f7198d3bf..bb2dd9624b 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -631,12 +631,16 @@ int board_init(void) int power_init_board(void) { struct pmic *p; - unsigned int reg; + unsigned int reg, ret; p = pfuze_common_init(I2C_PMIC); if (!p) return -ENODEV; + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + /* Increase VGEN3 from 2.5 to 2.8V */ pmic_reg_read(p, PFUZE100_VGEN3VOL, ®); reg &= ~LDO_VOL_MASK; diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index a2c9aae32c..2ff960e3bb 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -199,12 +199,16 @@ static struct i2c_pads_info i2c_pad_info1 = { int power_init_board(void) { struct pmic *p; - unsigned int reg; + unsigned int reg, ret; p = pfuze_common_init(I2C_PMIC); if (!p) return -ENODEV; + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + /* Enable power of VGEN5 3V3, needed for SD3 */ pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); reg &= ~LDO_VOL_MASK; -- cgit