From be3dec48b0e53e3b14a8fc742e4409cce3475421 Mon Sep 17 00:00:00 2001
From: Tom Rini <trini@konsulko.com>
Date: Sat, 20 Feb 2021 20:05:42 -0500
Subject: arm: Remove ts4600 board

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 board/technologic/ts4600/ts4600.c | 91 ---------------------------------------
 1 file changed, 91 deletions(-)
 delete mode 100644 board/technologic/ts4600/ts4600.c

(limited to 'board/technologic/ts4600/ts4600.c')

diff --git a/board/technologic/ts4600/ts4600.c b/board/technologic/ts4600/ts4600.c
deleted file mode 100644
index b9cce821d9..0000000000
--- a/board/technologic/ts4600/ts4600.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Savoir-faire Linux Inc.
- *
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- *
- * Based on work from TS7680 code by:
- *   Kris Bahnsen <kris@embeddedarm.com>
- *   Mark Featherston <mark@embeddedarm.com>
- *   https://github.com/embeddedarm/u-boot/tree/master/board/technologic/ts7680
- *
- * Derived from MX28EVK code by
- *   Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/* IO0 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK0, 480000);
-	/* IO1 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK1, 480000);
-
-	/* SSP0 clocks at 96MHz */
-	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	return mxs_dram_init();
-}
-
-int board_init(void)
-{
-	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-static int ts4600_mmc_cd(int id)
-{
-	return 1;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	int ret;
-
-	mxs_iomux_setup_pad(MX28_PAD_PWM3__GPIO_3_28);
-
-	/* Power-on SD */
-	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 1);
-	udelay(1000);
-	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
-	/* SD card */
-	ret = mxsmmc_initialize(bis, 0, NULL, ts4600_mmc_cd);
-	if(ret != 0) {
-		printf("SD controller initialized with %d\n", ret);
-	}
-
-	return ret;
-}
-#endif
-
-int checkboard(void)
-{
-	puts("Board: TS4600\n");
-
-	return 0;
-}
-- 
cgit