From 9973e3c614721bbf169882ffc3be266a6611cd60 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 9 Jun 2008 16:03:40 -0500 Subject: Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce --- board/spc1920/spc1920.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/spc1920') diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c index 1f5dcb5d3e..a32aad0ee4 100644 --- a/board/spc1920/spc1920.c +++ b/board/spc1920/spc1920.c @@ -82,7 +82,7 @@ const uint sdram_table[] = { _NOT_USED_, _NOT_USED_, _NOT_USED_, }; -long int initdram (int board_type) +phys_size_t initdram (int board_type) { volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; -- cgit