From f85a8e8d1db374d894afc03504a0eead1de99f74 Mon Sep 17 00:00:00 2001 From: Xiaoliang Yang Date: Wed, 14 Sep 2016 11:36:14 +0800 Subject: armv7: LS1021a: enable i-cache in start.S Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First stage of u-boot can run faster after that. There is a description about skip lowlevel init in board/freescale/ls1021atwr/README. Signed-off-by: Xiaoliang Yang Reviewed-by: York Sun --- board/freescale/ls1021aqds/README | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'board/freescale/ls1021aqds') diff --git a/board/freescale/ls1021aqds/README b/board/freescale/ls1021aqds/README index c561776621..6cf7146fb2 100644 --- a/board/freescale/ls1021aqds/README +++ b/board/freescale/ls1021aqds/README @@ -110,3 +110,9 @@ Start Address End Address Description Size 0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB 0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB 0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB + +LS1021a rev1.0 Soc specific Options/Settings +-------------------------------------------- +If the LS1021a Soc is rev1.0, you need modify the configure file. +Add the following define in include/configs/ls1021aqds.h: +#define CONFIG_SKIP_LOWLEVEL_INIT -- cgit