From f6a6a9f0497a9ec9f48966b2ee89d762f26092d2 Mon Sep 17 00:00:00 2001 From: "maxims@google.com" Date: Wed, 18 Jan 2017 13:44:57 -0800 Subject: aspeed: Board init functions and common configs for ast2500 based boards Add configuration file with parameters that are very likely to be shared by all ast2500-based boards. Add ast2500-board.c file with the init code that is very likely to be shared by all ast2500-based boards. Reviewed-by: Simon Glass --- arch/arm/mach-aspeed/Makefile | 2 +- arch/arm/mach-aspeed/ast2500-board.c | 83 ++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-aspeed/ast2500-board.c (limited to 'arch/arm') diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/Makefile index 1f7af71b03..9d29ff7f6f 100644 --- a/arch/arm/mach-aspeed/Makefile +++ b/arch/arm/mach-aspeed/Makefile @@ -5,4 +5,4 @@ # obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o -obj-$(CONFIG_ASPEED_AST2500) += ast2500/ +obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o diff --git a/arch/arm/mach-aspeed/ast2500-board.c b/arch/arm/mach-aspeed/ast2500-board.c new file mode 100644 index 0000000000..80446af089 --- /dev/null +++ b/arch/arm/mach-aspeed/ast2500-board.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2016 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Second Watchdog Timer by default is configured + * to trigger secondary boot source. + */ +#define AST_2ND_BOOT_WDT 1 + +/* + * Third Watchdog Timer by default is configured + * to toggle Flash address mode switch before reset. + */ +#define AST_FLASH_ADDR_DETECT_WDT 2 + +DECLARE_GLOBAL_DATA_PTR; + +void lowlevel_init(void) +{ + /* + * These two watchdogs need to be stopped as soon as possible, + * otherwise the board might hang. By default they are set to + * a very short timeout and even simple debug write to serial + * console early in the init process might cause them to fire. + */ + struct ast_wdt *flash_addr_wdt = + (struct ast_wdt *)(WDT_BASE + + sizeof(struct ast_wdt) * + AST_FLASH_ADDR_DETECT_WDT); + + clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN); + +#ifndef CONFIG_FIRMWARE_2ND_BOOT + struct ast_wdt *sec_boot_wdt = + (struct ast_wdt *)(WDT_BASE + + sizeof(struct ast_wdt) * + AST_2ND_BOOT_WDT); + + clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN); +#endif +} + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +int dram_init(void) +{ + struct udevice *dev; + struct ram_info ram; + int ret; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM FAIL1\r\n"); + return ret; + } + + ret = ram_get_info(dev, &ram); + if (ret) { + debug("DRAM FAIL2\r\n"); + return ret; + } + + gd->ram_size = ram.size; + + return 0; +} -- cgit