From c3624e6ed0a36f54aa0b3e7f32d30a6fde434f51 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 28 Mar 2011 09:58:43 +0000 Subject: Default to bootm_size() when CONFIG_SYS_BOOTMAPSZ is not defined This patch adds a function getenv_bootm_mapsize() for obtaining the size of the early mapped region accessible by the kernel during early boot. It defaults to CONFIG_SYS_BOOTMAPSZ, or if not defined, defaults to getenv_bootm_size(), which in turn defaults to the size of RAM. getenv_bootm_mapsize() can also be overridden with a "bootm_mapsize" environmental variable. Signed-off-by: Grant Likely --- README | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'README') diff --git a/README b/README index cdbb9de02c..b647ecac34 100644 --- a/README +++ b/README @@ -2348,7 +2348,10 @@ Configuration Settings: used) must be put below this limit, unless "bootm_low" enviroment variable is defined and non-zero. In such case all data for the Linux kernel must be between "bootm_low" - and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. + and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment + variable "bootm_mapsize" will override the value of + CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, + then the value in "bootm_size" will be used instead. - CONFIG_SYS_BOOT_RAMDISK_HIGH: Enable initrd_high functionality. If defined then the @@ -3184,7 +3187,16 @@ List of environment variables (most likely not complete): for use by the bootm command. See also "bootm_size" environment variable. Address defined by "bootm_low" is also the base of the initial memory mapping for the Linux - kernel -- see the description of CONFIG_SYS_BOOTMAPSZ. + kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and + bootm_mapsize. + + bootm_mapsize - Size of the initial memory mapping for the Linux kernel. + This variable is given as a hexadecimal number and it + defines the size of the memory region starting at base + address bootm_low that is accessible by the Linux kernel + during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used + as the default value if it is defined, and bootm_size is + used otherwise. bootm_size - Memory range available for image processing in the bootm command can be restricted. This variable is given as -- cgit