From 6abe6fb68b6ba17a9b6b538924bea94c249dcb9b Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Wed, 27 Apr 2011 05:25:59 +0000 Subject: README: Clarify difference of CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG Now that we have the documentation, the code should be changed to reflect it ;) Asd far as I can see, these are the places where HW_WATCHDOG is used instead of WATCHDOG: arch/blackfin/cpu/blackfin/watchdog.c arch/m68k/cpu/mcf547x_8x/cpu.c The relevant maintainers are on CC. Signed-off-by: Detlev Zundel Cc: Mike Frysinger Cc: TsiChungLiew --- README | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'README') diff --git a/README b/README index 68dab2d1e3..6f3748d6dc 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 - 2009 +# (C) Copyright 2000 - 2011 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -739,10 +739,17 @@ The following options need to be configured: - Watchdog: CONFIG_WATCHDOG If this variable is defined, it enables watchdog - support. There must be support in the platform specific - code for a watchdog. For the 8xx and 8260 CPUs, the - SIU Watchdog feature is enabled in the SYPCR - register. + support for the SoC. There must be support in the SoC + specific code for a watchdog. For the 8xx and 8260 + CPUs, the SIU Watchdog feature is enabled in the SYPCR + register. When supported for a specific SoC is + available, then no further board specific code should + be needed to use it. + + CONFIG_HW_WATCHDOG + When using a watchdog circuitry external to the used + SoC, then define this variable and provide board + specific code for the "hw_watchdog_reset" function. - U-Boot Version: CONFIG_VERSION_VARIABLE -- cgit