From 5c088ee841f9c660a3e62887e7b8623fc15dcd68 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 11 Jun 2013 15:14:02 -0600 Subject: env_mmc: allow negative CONFIG_ENV_OFFSET A negative value of CONFIG_ENV_OFFSET is treated as a backwards offset from the end of the eMMC device/partition, rather than a forwards offset from the start. This is useful when a single board may be stuffed with different eMMC devices, each of which has a different capacity, and you always want the environment to be stored at the very end of the device (or eMMC boot partition for example). One example of this case is NVIDIA's Ventana reference board. Signed-off-by: Stephen Warren Signed-off-by: Andy Fleming --- README | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'README') diff --git a/README b/README index f1485bac13..6852080c43 100644 --- a/README +++ b/README @@ -3666,6 +3666,14 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. These two #defines specify the offset and size of the environment area within the specified MMC device. + If offset is positive (the usual case), it is treated as relative to + the start of the MMC partition. If offset is negative, it is treated + as relative to the end of the MMC partition. This can be useful if + your board may be fitted with different MMC devices, which have + different sizes for the MMC partitions, and you always want the + environment placed at the very end of the partition, to leave the + maximum possible space before it, to store other data. + These two values are in units of bytes, but must be aligned to an MMC sector boundary. @@ -3676,6 +3684,9 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. valid backup copy in case the other copy is corrupted, e.g. due to a power failure during a "saveenv" operation. + This value may also be positive or negative; this is handled in the + same way as CONFIG_ENV_OFFSET. + This value is also in units of bytes, but must also be aligned to an MMC sector boundary. -- cgit