From 7a0227534dfc17c96bb02529fb69971d079a85f0 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Thu, 22 May 2014 14:37:10 +0530 Subject: drivers: net: cpsw: add support for using second port as ethernet Add support for using the second slave port of cpsw to be used as primary ethernet. Signed-off-by: Mugunthan V N --- drivers/net/cpsw.c | 8 +++++--- include/cpsw.h | 1 + 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index bd5fba21ce..8ec5161ec6 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -211,6 +211,8 @@ struct cpdma_chan { #define chan_read(chan, fld) __raw_readl((chan)->fld) #define chan_read_ptr(chan, fld) ((void *)__raw_readl((chan)->fld)) +#define for_active_slave(slave, priv) \ + slave = (priv)->slaves + (priv)->data.active_slave; if (slave) #define for_each_slave(slave, priv) \ for (slave = (priv)->slaves; slave != (priv)->slaves + \ (priv)->data.slaves; slave++) @@ -609,7 +611,7 @@ static int cpsw_update_link(struct cpsw_priv *priv) int link = 0; struct cpsw_slave *slave; - for_each_slave(slave, priv) + for_active_slave(slave, priv) cpsw_slave_update_link(slave, priv, &link); priv->mdio_link = readl(&mdio_regs->link); return link; @@ -785,7 +787,7 @@ static int cpsw_init(struct eth_device *dev, bd_t *bis) ALE_SECURE); cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << priv->host_port); - for_each_slave(slave, priv) + for_active_slave(slave, priv) cpsw_slave_init(slave, priv); cpsw_update_link(priv); @@ -1013,7 +1015,7 @@ int cpsw_register(struct cpsw_platform_data *data) cpsw_mdio_init(dev->name, data->mdio_base, data->mdio_div); priv->bus = miiphy_get_dev_by_name(dev->name); - for_each_slave(slave, priv) + for_active_slave(slave, priv) cpsw_phy_init(dev, slave); return 1; diff --git a/include/cpsw.h b/include/cpsw.h index a73843d2f7..547b40c57b 100644 --- a/include/cpsw.h +++ b/include/cpsw.h @@ -44,6 +44,7 @@ struct cpsw_platform_data { struct cpsw_slave_data *slave_data; void (*control)(int enabled); u32 host_port_num; + u32 active_slave; u8 version; }; -- cgit From e5ff845bff6dfc6e4d1d8b75fb817a8bc7635b2f Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Thu, 22 May 2014 14:37:11 +0530 Subject: ARM: DRA7xx: Add cpsw second port pinmux Add cpsw second slave port pinmux to use it as primary ethernet port Signed-off-by: Mugunthan V N --- board/ti/dra7xx/mux_data.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 38de9d5a8b..56cda07ed7 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -51,6 +51,18 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {RGMII0_RXD2, (IEN | M0) }, {RGMII0_RXD1, (IEN | M0) }, {RGMII0_RXD0, (IEN | M0) }, + {VIN2A_D12, (M3) }, + {VIN2A_D13, (M3) }, + {VIN2A_D14, (M3) }, + {VIN2A_D15, (M3) }, + {VIN2A_D16, (M3) }, + {VIN2A_D17, (M3) }, + {VIN2A_D18, (IEN | M3)}, + {VIN2A_D19, (IEN | M3)}, + {VIN2A_D20, (IEN | M3)}, + {VIN2A_D21, (IEN | M3)}, + {VIN2A_D22, (IEN | M3)}, + {VIN2A_D23, (IEN | M3)}, {GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */ {GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */ {GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */ -- cgit From 4c8014b9429b593c28fbf0384a6c7ded8587806a Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Thu, 22 May 2014 14:37:12 +0530 Subject: ARM: dra7_evm: Add Ethernet support for dra72x platform Set the active_slave to 1 as slave 1 is pinned out in dra72x base board Signed-off-by: Mugunthan V N --- board/ti/dra7xx/evm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 073d15127c..955c16fe74 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -157,6 +157,8 @@ int spl_start_uboot(void) #define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) #define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0) +extern u32 *const omap_si_rev; + static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -183,7 +185,7 @@ static struct cpsw_platform_data cpsw_data = { .mdio_div = 0xff, .channels = 8, .cpdma_reg_ofs = 0x800, - .slaves = 1, + .slaves = 2, .slave_data = cpsw_slaves, .ale_reg_ofs = 0xd00, .ale_entries = 1024, @@ -254,6 +256,9 @@ int board_eth_init(bd_t *bis) ctrl_val |= 0x22; writel(ctrl_val, (*ctrl)->control_core_control_io1); + if (*omap_si_rev == DRA722_ES1_0) + cpsw_data.active_slave = 1; + ret = cpsw_register(&cpsw_data); if (ret < 0) printf("Error %d registering CPSW switch\n", ret); -- cgit From 5c44dd6bbd42775a93b9938510d398f0e26dbcc2 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 23 Jun 2014 16:06:28 -0400 Subject: power/pmic.h: Add prototype for power_init_board. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As this is a weak function that we may override, provide a prototype for it. Cc: Łukasz Majewski Signed-off-by: Tom Rini --- include/power/pmic.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/power/pmic.h b/include/power/pmic.h index a62e6c90a5..afbc5aab7e 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -79,6 +79,7 @@ struct pmic { }; int pmic_init(unsigned char bus); +int power_init_board(void); int pmic_dialog_init(unsigned char bus); int check_reg(struct pmic *p, u32 reg); struct pmic *pmic_alloc(void); -- cgit From 7aa5598aac3faf9188559f7a50940df11c30b656 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 23 Jun 2014 16:06:29 -0400 Subject: tps65218/am43xx_evm: Add power framework support to TPS65218 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski Signed-off-by: Tom Rini --- board/ti/am43xx/board.c | 14 ++++++++++++++ drivers/power/pmic/pmic_tps65218.c | 22 ++++++++++++++++++++++ include/configs/am43xx_evm.h | 2 ++ include/power/tps65218.h | 1 + 4 files changed, 39 insertions(+) diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 054a452eac..f6577769e7 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -19,6 +19,7 @@ #include #include #include "board.h" +#include #include #include #include @@ -484,6 +485,19 @@ void sdram_init(void) } #endif +/* setup board specific PMIC */ +int power_init_board(void) +{ + struct pmic *p; + + power_tps65218_init(I2C_PMIC); + p = pmic_get("TPS65218_PMIC"); + if (p && !pmic_probe(p)) + puts("PMIC: TPS65218\n"); + + return 0; +} + int board_init(void) { gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c index 0952456379..dbc7a73a72 100644 --- a/drivers/power/pmic/pmic_tps65218.c +++ b/drivers/power/pmic/pmic_tps65218.c @@ -7,6 +7,8 @@ #include #include +#include +#include #include /** @@ -95,3 +97,23 @@ int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel) return 0; } + +int power_tps65218_init(unsigned char bus) +{ + static const char name[] = "TPS65218_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + p->name = name; + p->interface = PMIC_I2C; + p->number_of_regs = TPS65218_PMIC_NUM_OF_REGS; + p->hw.i2c.addr = TPS65218_CHIP_PM; + p->hw.i2c.tx_num = 1; + p->bus = bus; + + return 0; +} diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 974ce986e9..e26204025f 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -33,6 +33,8 @@ #define CONFIG_SYS_I2C_MULTI_EEPROMS /* Power */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C #define CONFIG_POWER_TPS65218 /* SPL defines. */ diff --git a/include/power/tps65218.h b/include/power/tps65218.h index 67aa2f8c8d..f8f33b8b16 100644 --- a/include/power/tps65218.h +++ b/include/power/tps65218.h @@ -60,4 +60,5 @@ enum { int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val, uchar mask); int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel); +int power_tps65218_init(unsigned char bus); #endif /* __POWER_TPS65218_H__ */ -- cgit From 67ac6ffaeefb93ff294f976cbb03479f84aa0b1a Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Fri, 4 Jul 2014 15:03:25 +0300 Subject: mtd: nand: davinci: add opportunity to write keystone U-boot image The Keystone SoCs use the same NAND driver as Davinci. This patch adds opportunity to write Keystone U-boot image to NAND device using appropriate RBL ECC layout. This is needed only if RBL boots U-boot from NAND device and that's supposed that raw u-boot partition is used only for writing image. The main problem is that default Davinci ECC layout is different from Keystone RBL layout. To read U-boot image the RBL needs that image was written using RBL ECC layout. The BBT table is written using default Davinci layout and has to be updated using one. The BBT can be updated only while erasing chip or by forced bad block assigning, so erase function has to use native ecc layout in order to be able to write BBT correctly. So if we're writing to NAND U-boot address we use RBL layout for others we use default ECC layout. Also remove definition for CONFIG_CMD_NAND_ECCLAYOUT as there is no reasons to use ECC layout commands. It was added by mistake. Signed-off-by: Ivan Khoronzhuk --- drivers/mtd/nand/davinci_nand.c | 196 ++++++++++++++++++++++++++++++++++++++++ include/configs/k2hk_evm.h | 4 +- 2 files changed, 199 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 5d425092f4..a079b1e5cf 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -305,6 +305,189 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { #endif }; +#if defined CONFIG_KEYSTONE_RBL_NAND +#if defined(CONFIG_SYS_NAND_PAGE_2K) +static struct nand_ecclayout nand_keystone_rbl_4bit_layout_oobfirst = { + .eccbytes = 40, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + }, + .oobfree = { + {.offset = 2, .length = 4, }, + {.offset = 16, .length = 6, }, + {.offset = 32, .length = 6, }, + {.offset = 48, .length = 6, }, + }, +#elif defined(CONFIG_SYS_NAND_PAGE_4K) + .eccbytes = 80, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, + 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + }, + .oobfree = { + {.offset = 2, .length = 4, }, + {.offset = 16, .length = 6, }, + {.offset = 32, .length = 6, }, + {.offset = 48, .length = 6, }, + {.offset = 64, .length = 6, }, + {.offset = 80, .length = 6, }, + {.offset = 96, .length = 6, }, + {.offset = 112, .length = 6, }, + }, +#endif +}; + +#ifdef CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE >> 11 +#elif defined(CONFIG_SYS_NAND_PAGE_4K) +#define CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE >> 12 +#endif + +/** + * nand_davinci_write_page - write one page + * @mtd: MTD device structure + * @chip: NAND chip descriptor + * @buf: the data to write + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * @cached: cached programming + * @raw: use _raw version of write_page + */ +static int nand_davinci_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, + int page, int cached, int raw) +{ + int status; + int ret = 0; + struct nand_ecclayout *saved_ecc_layout; + + /* save current ECC layout and assign Keystone RBL ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + saved_ecc_layout = chip->ecc.layout; + chip->ecc.layout = &nand_keystone_rbl_4bit_layout_oobfirst; + mtd->oobavail = chip->ecc.layout->oobavail; + } + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + + if (unlikely(raw)) + status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required); + else + status = chip->ecc.write_page(mtd, chip, buf, oob_required); + + if (status < 0) { + ret = status; + goto err; + } + + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + + /* + * See if operation failed and additional status checks are + * available. + */ + if ((status & NAND_STATUS_FAIL) && (chip->errstat)) + status = chip->errstat(mtd, chip, FL_WRITING, status, page); + + if (status & NAND_STATUS_FAIL) { + ret = -EIO; + goto err; + } + +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE + /* Send command to read back the data */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + if (chip->verify_buf(mtd, buf, mtd->writesize)) { + ret = -EIO; + goto err; + } + + /* Make sure the next page prog is preceded by a status read */ + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); +#endif +err: + /* restore ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + chip->ecc.layout = saved_ecc_layout; + mtd->oobavail = saved_ecc_layout->oobavail; + } + + return ret; +} + +/** + * nand_davinci_read_page_hwecc - hardware ECC based page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi + * @page: page number to read + * + * Not for syndrome calculating ECC controllers which need a special oob layout. + */ +static int nand_davinci_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint32_t *eccpos; + uint8_t *p = buf; + uint8_t *ecc_code = chip->buffers->ecccode; + uint8_t *ecc_calc = chip->buffers->ecccalc; + struct nand_ecclayout *saved_ecc_layout = chip->ecc.layout; + + /* save current ECC layout and assign Keystone RBL ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + chip->ecc.layout = &nand_keystone_rbl_4bit_layout_oobfirst; + mtd->oobavail = chip->ecc.layout->oobavail; + } + + eccpos = chip->ecc.layout->eccpos; + + /* Read the OOB area first */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + + /* restore ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + chip->ecc.layout = saved_ecc_layout; + mtd->oobavail = saved_ecc_layout->oobavail; + } + + return 0; +} +#endif /* CONFIG_KEYSTONE_RBL_NAND */ + static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode) { u32 val; @@ -604,6 +787,19 @@ static void nand_flash_init(void) void davinci_nand_init(struct nand_chip *nand) { +#if defined CONFIG_KEYSTONE_RBL_NAND + int i; + struct nand_ecclayout *layout; + + layout = &nand_keystone_rbl_4bit_layout_oobfirst; + layout->oobavail = 0; + for (i = 0; layout->oobfree[i].length && + i < ARRAY_SIZE(layout->oobfree); i++) + layout->oobavail += layout->oobfree[i].length; + + nand->write_page = nand_davinci_write_page; + nand->ecc.read_page = nand_davinci_read_page_hwecc; +#endif nand->chip_delay = 0; #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT nand->bbt_options |= NAND_BBT_USE_FLASH; diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 858329f958..3f877418cd 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -135,7 +135,8 @@ /* NAND Configuration */ #define CONFIG_NAND_DAVINCI -#define CONFIG_CMD_NAND_ECCLAYOUT +#define CONFIG_KEYSTONE_RBL_NAND +#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET #define CONFIG_SYS_NAND_CS 2 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST @@ -155,6 +156,7 @@ #define CONFIG_MTD_DEVICE #define CONFIG_RBTREE #define CONFIG_LZO +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" #define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ "1024k(bootloader)ro,512k(params)ro," \ "-(ubifs)" -- cgit From 0e7f2dbac6ead25798f81c9f6d5f80b7666916f6 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Fri, 4 Jul 2014 15:03:26 +0300 Subject: keystone: add support for NAND gpheader image Add support for NAND gpheader image. TI Keystone2 ROM bootloader expects 8 bytes of trailing zeroes in the nand u-boot image. So add zeros at the end of the nand gph image. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- Makefile | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Makefile b/Makefile index 686cab1460..76533135f2 100644 --- a/Makefile +++ b/Makefile @@ -914,6 +914,12 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot +u-boot-nand.gph: u-boot.bin FORCE + $(call if_changed,mkimage) + @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ + ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -- cgit From c6ac7e3bdc195a7dd39b5bf699deceedb9444c0c Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Fri, 4 Jul 2014 15:03:27 +0300 Subject: k2hk_evm: add script to automate NAND flash process Add script to automate NAND flash process. As for now the board has two burn scripts - burn to boot from SPI NOR flash and burn to boot from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi. Also update README to contain NAND burn U-boot process description. Signed-off-by: Ivan Khoronzhuk Acked-by: Murali Karicheri --- board/ti/k2hk_evm/README | 28 +++++++++++++++++++++++++++- include/configs/k2hk_evm.h | 4 +++- 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README index bfeb05b4a4..7426b8dc97 100644 --- a/board/ti/k2hk_evm/README +++ b/board/ti/k2hk_evm/README @@ -38,11 +38,13 @@ board configuration file: include/configs/k2hk_evm.h Supported boot modes: - SPI NOR boot + - AEMIF NAND boot Supported image formats:- - u-boot.bin: for loading and running u-boot.bin through Texas instruments code composure studio (CCS) - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot + - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot Build instructions: =================== @@ -55,6 +57,10 @@ To build u-boot-spi.gph >make k2hk_evm_config >make u-boot-spi.gph +To build u-boot-nand.gph + >make k2hk_evm_config + >make u-boot-nand.gph + Load and Run U-Boot on K2HK EVM using CCS ========================================= @@ -115,8 +121,28 @@ instructions:- 5. At the U-Boot console type following to setup u-boot environment variables. setenv addr_uboot 0x87000000 setenv filesize - run burn_uboot + run burn_uboot_spi Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch to "SPI Little Endian Boot mode" as per instruction at http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. 6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. + +AEMIF NAND Flash programming instructions +====================================== +U-Boot image can be flashed to first 1024KB of the NAND flash using following +instructions:- + +1. Start CCS and run U-boot as described above. +2. Suspend Target. Select Run -> Suspend from top level menu + CortexA15_1 (Free Running)" +3. Load u-boot-nand.gph binary from build folder on to DDR address 0x87000000 + through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM + using CCS", but using address 0x87000000. +4. Free Run the target as desribed earlier (step 4) to get u-boot prompt +5. At the U-Boot console type following to setup u-boot environment variables. + setenv filesize + run burn_uboot_nand + Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + to "ARM NAND Boot mode" as per instruction at + http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. +6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash. diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 3f877418cd..63e02495e1 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -221,8 +221,10 @@ "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ - "burn_uboot=sf probe; sf erase 0 0x100000; " \ + "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \ "sf write ${addr_uboot} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${addr_uboot} 0 ${filesize}\0" \ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ -- cgit From c4f80f500356a8e0a71debe5bbe6e9a0d6d5d62e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 7 Jul 2014 21:40:16 -0400 Subject: am335x_evm / gumstix pepper: Correct DDR settings As noted by clang, we have been shifting certain values out of 32bit range when setting some DDR registers. Upon further inspection these had been touching reserved fields (and having no impact). These came in from historical bring-up code and can be discarded. Similarly, we had been declaring some fields as 0 when they will be initialized that way. Tested on Beaglebone White. Reported-by: Jeroen Hofstee Cc: Ash Charles Signed-off-by: Tom Rini Tested-By: Ash Charles --- arch/arm/include/asm/arch-am33xx/ddr_defs.h | 4 ---- board/gumstix/pepper/board.c | 30 +++-------------------------- board/ti/am335x/board.c | 30 +++-------------------------- 3 files changed, 6 insertions(+), 58 deletions(-) diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 4d899528f5..97bbfe2e65 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -33,11 +33,7 @@ #define MT47H128M16RT25E_EMIF_SDCFG 0x41805332 #define MT47H128M16RT25E_EMIF_SDREF 0x0000081a #define MT47H128M16RT25E_RATIO 0x80 -#define MT47H128M16RT25E_INVERT_CLKOUT 0x00 #define MT47H128M16RT25E_RD_DQS 0x12 -#define MT47H128M16RT25E_WR_DQS 0x00 -#define MT47H128M16RT25E_PHY_WRLVL 0x00 -#define MT47H128M16RT25E_PHY_GATELVL 0x00 #define MT47H128M16RT25E_PHY_WR_DATA 0x40 #define MT47H128M16RT25E_PHY_FIFO_WE 0x80 #define MT47H128M16RT25E_IOCTRL_VALUE 0x18B diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c index 75aac49fd0..f644f8188b 100644 --- a/board/gumstix/pepper/board.c +++ b/board/gumstix/pepper/board.c @@ -34,41 +34,17 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD static const struct ddr_data ddr2_data = { - .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | - (MT47H128M16RT25E_RD_DQS<<20) | - (MT47H128M16RT25E_RD_DQS<<10) | - (MT47H128M16RT25E_RD_DQS<<0)), - .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | - (MT47H128M16RT25E_WR_DQS<<20) | - (MT47H128M16RT25E_WR_DQS<<10) | - (MT47H128M16RT25E_WR_DQS<<0)), - .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | - (MT47H128M16RT25E_PHY_WRLVL<<20) | - (MT47H128M16RT25E_PHY_WRLVL<<10) | - (MT47H128M16RT25E_PHY_WRLVL<<0)), - .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | - (MT47H128M16RT25E_PHY_GATELVL<<20) | - (MT47H128M16RT25E_PHY_GATELVL<<10) | - (MT47H128M16RT25E_PHY_GATELVL<<0)), - .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | - (MT47H128M16RT25E_PHY_FIFO_WE<<20) | - (MT47H128M16RT25E_PHY_FIFO_WE<<10) | - (MT47H128M16RT25E_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | - (MT47H128M16RT25E_PHY_WR_DATA<<20) | - (MT47H128M16RT25E_PHY_WR_DATA<<10) | - (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datardsratio0 = MT47H128M16RT25E_RD_DQS, + .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE, + .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA, }; static const struct cmd_control ddr2_cmd_ctrl_data = { .cmd0csratio = MT47H128M16RT25E_RATIO, - .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd1csratio = MT47H128M16RT25E_RATIO, - .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd2csratio = MT47H128M16RT25E_RATIO, - .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, }; static const struct emif_regs ddr2_emif_reg_data = { diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index da780edb89..d81eec90b4 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -84,41 +84,17 @@ static int read_eeprom(struct am335x_baseboard_id *header) #ifndef CONFIG_SKIP_LOWLEVEL_INIT static const struct ddr_data ddr2_data = { - .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | - (MT47H128M16RT25E_RD_DQS<<20) | - (MT47H128M16RT25E_RD_DQS<<10) | - (MT47H128M16RT25E_RD_DQS<<0)), - .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | - (MT47H128M16RT25E_WR_DQS<<20) | - (MT47H128M16RT25E_WR_DQS<<10) | - (MT47H128M16RT25E_WR_DQS<<0)), - .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | - (MT47H128M16RT25E_PHY_WRLVL<<20) | - (MT47H128M16RT25E_PHY_WRLVL<<10) | - (MT47H128M16RT25E_PHY_WRLVL<<0)), - .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | - (MT47H128M16RT25E_PHY_GATELVL<<20) | - (MT47H128M16RT25E_PHY_GATELVL<<10) | - (MT47H128M16RT25E_PHY_GATELVL<<0)), - .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | - (MT47H128M16RT25E_PHY_FIFO_WE<<20) | - (MT47H128M16RT25E_PHY_FIFO_WE<<10) | - (MT47H128M16RT25E_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | - (MT47H128M16RT25E_PHY_WR_DATA<<20) | - (MT47H128M16RT25E_PHY_WR_DATA<<10) | - (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datardsratio0 = MT47H128M16RT25E_RD_DQS, + .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE, + .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA, }; static const struct cmd_control ddr2_cmd_ctrl_data = { .cmd0csratio = MT47H128M16RT25E_RATIO, - .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd1csratio = MT47H128M16RT25E_RATIO, - .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd2csratio = MT47H128M16RT25E_RATIO, - .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, }; static const struct emif_regs ddr2_emif_reg_data = { -- cgit From e6f9d419c86d311b19c27ae12d2d7dd921c06058 Mon Sep 17 00:00:00 2001 From: Andreas Bießmann Date: Wed, 9 Jul 2014 17:10:34 +0200 Subject: tricorder: convert to generic board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Bießmann Cc: Thomas Weber --- include/configs/tricorder.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 80985a2655..847e099512 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -35,6 +35,8 @@ #include /* get chip and board defs */ #include +#define CONFIG_SYS_GENERIC_BOARD + /* Display CPU and Board information */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -- cgit From fb2fcb798a524858780b7a8c7ea8a21d104c36b1 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 9 Jul 2014 17:18:09 +0200 Subject: ARM: omap: Fix GPMC init for OMAP3 platforms Commit a0a37183 (ARM: omap: merge GPMC initialization code for all platform) broke NAND on OMAP3 based platforms. I noticed this while testing the latest 2014.07-rc version on the TAO3530 board. NAND detection did not work with this error message: NAND: nand: error: Unable to find NAND settings in GPMC Configuration - quitting As OMAP3 configs don't set CONFIG_NAND but CONFIG_NAND_CMD. the GPMC was not initialized for NAND at all. This patch now fixes this issue. Tested on TAO3530 board. Signed-off-by: Stefan Roese Cc: Pekon Gupta Cc: Tom Rini Acked-by: Pekon Gupta --- arch/arm/cpu/armv7/omap-common/mem-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c index 5bc7e1f19b..ba26cd1fdb 100644 --- a/arch/arm/cpu/armv7/omap-common/mem-common.c +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c @@ -89,7 +89,7 @@ void gpmc_init(void) }; u32 size = GPMC_SIZE_16M; u32 base = CONFIG_SYS_FLASH_BASE; -#elif defined(CONFIG_NAND) +#elif defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND) /* configure GPMC for NAND */ const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, M_NAND_GPMC_CONFIG2, -- cgit From 6d3bbdb0e718aba1e63086d27392f36c81f338fe Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 9 Jul 2014 17:18:10 +0200 Subject: ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c These functions have been merged into the common GPMC init code with this commit a0a37183 (ARM: omap: merge GPMC initialization code for all platform). The file is not compiled any more. So remove it as well. Signed-off-by: Stefan Roese Cc: Pekon Gupta Cc: Tom Rini Acked-by: Pekon Gupta --- arch/arm/cpu/armv7/omap3/mem.c | 139 ----------------------------------------- 1 file changed, 139 deletions(-) delete mode 100644 arch/arm/cpu/armv7/omap3/mem.c diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c deleted file mode 100644 index 1832affa5b..0000000000 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments, - * - * Author : - * Manikandan Pillai - * - * Initial Code from: - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -struct gpmc *gpmc_cfg; - -#if defined(CONFIG_CMD_NAND) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, 0 -}; -#endif /* CONFIG_CMD_NAND */ - -#if defined(CONFIG_CMD_ONENAND) -static const u32 gpmc_onenand[GPMC_MAX_REG] = { - ONENAND_GPMC_CONFIG1, - ONENAND_GPMC_CONFIG2, - ONENAND_GPMC_CONFIG3, - ONENAND_GPMC_CONFIG4, - ONENAND_GPMC_CONFIG5, - ONENAND_GPMC_CONFIG6, 0 -}; -#endif /* CONFIG_CMD_ONENAND */ - -/******************************************************** - * mem_ok() - test used to see if timings are correct - * for a part. Helps in guessing which part - * we are currently using. - *******************************************************/ -u32 mem_ok(u32 cs) -{ - u32 val1, val2, addr; - u32 pattern = 0x12345678; - - addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); - - writel(0x0, addr + 0x400); /* clear pos A */ - writel(pattern, addr); /* pattern to pos B */ - writel(0x0, addr + 4); /* remove pattern off the bus */ - val1 = readl(addr + 0x400); /* get pos A value */ - val2 = readl(addr); /* get val2 */ - writel(0x0, addr + 0x400); /* clear pos A */ - - if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ - return 0; - else - return 1; -} - -void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, - u32 size) -{ - writel(0, &cs->config7); - sdelay(1000); - /* Delay for settling */ - writel(gpmc_config[0], &cs->config1); - writel(gpmc_config[1], &cs->config2); - writel(gpmc_config[2], &cs->config3); - writel(gpmc_config[3], &cs->config4); - writel(gpmc_config[4], &cs->config5); - writel(gpmc_config[5], &cs->config6); - - /* - * Enable the config. size is the CS size and goes in - * bits 11:8. We set bit 6 to enable this CS and the base - * address goes into bits 5:0. - */ - writel((size << 8) | (GPMC_CS_ENABLE << 6) | - ((base >> 24) & GPMC_BASEADDR_MASK), - &cs->config7); - sdelay(2000); -} - -/***************************************************** - * gpmc_init(): init gpmc bus - * Init GPMC for x16, MuxMode (SDRAM in x32). - * This code can only be executed from SRAM or SDRAM. - *****************************************************/ -void gpmc_init(void) -{ - /* putting a blanket check on GPMC based on ZeBu for now */ - gpmc_cfg = (struct gpmc *)GPMC_BASE; -#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND) - const u32 *gpmc_config = NULL; - u32 base = 0; - u32 size = 0; -#endif - u32 config = 0; - - /* global settings */ - writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ - writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ - - config = readl(&gpmc_cfg->config); - config &= (~0xf00); - writel(config, &gpmc_cfg->config); - - /* - * Disable the GPMC0 config set by ROM code - * It conflicts with our MPDB (both at 0x08000000) - */ - writel(0, &gpmc_cfg->cs[0].config7); - sdelay(1000); - -#if defined(CONFIG_CMD_NAND) /* CS 0 */ - gpmc_config = gpmc_m_nand; - - base = PISMO1_NAND_BASE; - size = PISMO1_NAND_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif - -#if defined(CONFIG_CMD_ONENAND) - gpmc_config = gpmc_onenand; - base = PISMO1_ONEN_BASE; - size = PISMO1_ONEN_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif -} -- cgit From 188948e884794a562fca5c2dcdcb6f2c03ea4e7b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 9 Jul 2014 17:18:11 +0200 Subject: ARM: omap: tao3530: Convert to generic board Use generic board setup functions by defining CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Stefan Roese Cc: Tom Rini --- include/configs/tao3530.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 1b0fee9a80..62613e1eaa 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -22,6 +22,7 @@ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #define MACH_TYPE_OMAP3_TAO3530 2836 -- cgit From 04b7ce0773da133140f6f7ef70b37933eae36ad3 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 9 Jul 2014 19:48:39 +0300 Subject: ARM: keystone2: psc: use common PSC base Use common keystone2 Power Sleep controller base address instead of directly deciding which keystone2 SoC is used in psc module. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/psc.c | 42 ++++++++++------------ arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 1 - arch/arm/include/asm/arch-keystone/hardware.h | 3 ++ 3 files changed, 22 insertions(+), 24 deletions(-) diff --git a/arch/arm/cpu/armv7/keystone/psc.c b/arch/arm/cpu/armv7/keystone/psc.c index c844dc84d5..fa5422f2e8 100644 --- a/arch/arm/cpu/armv7/keystone/psc.c +++ b/arch/arm/cpu/armv7/keystone/psc.c @@ -16,10 +16,6 @@ #define DEVICE_REG32_R(addr) __raw_readl((u32 *)(addr)) #define DEVICE_REG32_W(addr, val) __raw_writel(val, (u32 *)(addr)) -#ifdef CONFIG_SOC_K2HK -#define DEVICE_PSC_BASE K2HK_PSC_BASE -#endif - int psc_delay(void) { udelay(10); @@ -55,7 +51,7 @@ int psc_wait(u32 domain_num) retry = 0; do { - ptstat = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PSTAT); + ptstat = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PSTAT); ptstat = ptstat & (1 << domain_num); } while ((ptstat != 0) && ((retry += psc_delay()) < PSC_PTSTAT_TIMEOUT_LIMIT)); @@ -71,7 +67,7 @@ u32 psc_get_domain_num(u32 mod_num) u32 domain_num; /* Get the power domain associated with the module number */ - domain_num = DEVICE_REG32_R(DEVICE_PSC_BASE + + domain_num = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); domain_num = PSC_REG_MDCFG_GET_PD(domain_num); @@ -106,7 +102,7 @@ int psc_set_state(u32 mod_num, u32 state) * Get the power domain associated with the module number, and reset * isolation functionality */ - v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num)); + v = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); domain_num = PSC_REG_MDCFG_GET_PD(v); reset_iso = PSC_REG_MDCFG_GET_RESET_ISO(v); @@ -123,24 +119,24 @@ int psc_set_state(u32 mod_num, u32 state) * change is made if the new state is power down. */ if (state == PSC_REG_VAL_MDCTL_NEXT_ON) { - pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + + pdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_ON); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl); } /* Set the next state for the module to enabled/disabled */ - mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state); mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); /* Trigger the enable */ - ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD); + ptcmd = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PTCMD); ptcmd |= (u32)(1< Date: Wed, 9 Jul 2014 19:48:40 +0300 Subject: keystone: ddr3: add ddr3.h to hold ddr3 API It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/ddr3.c | 6 +-- arch/arm/include/asm/arch-keystone/ddr3.h | 55 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-keystone/hardware.h | 39 ------------------- board/ti/k2hk_evm/board.c | 3 +- board/ti/k2hk_evm/ddr3.c | 27 +++++++------ 5 files changed, 76 insertions(+), 54 deletions(-) create mode 100644 arch/arm/include/asm/arch-keystone/ddr3.h diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c index 4875db76a3..bb16551eb2 100644 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -7,10 +7,10 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include #include +#include -void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) +void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) { unsigned int tmp; @@ -57,7 +57,7 @@ void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) ; } -void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) +void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) { __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET); __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET); diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h new file mode 100644 index 0000000000..05b7e2920d --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/ddr3.h @@ -0,0 +1,55 @@ +/* + * DDR3 + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DDR3_H_ +#define _DDR3_H_ + +#include + +struct ddr3_phy_config { + unsigned int pllcr; + unsigned int pgcr1_mask; + unsigned int pgcr1_val; + unsigned int ptr0; + unsigned int ptr1; + unsigned int ptr2; + unsigned int ptr3; + unsigned int ptr4; + unsigned int dcr_mask; + unsigned int dcr_val; + unsigned int dtpr0; + unsigned int dtpr1; + unsigned int dtpr2; + unsigned int mr0; + unsigned int mr1; + unsigned int mr2; + unsigned int dtcr; + unsigned int pgcr2; + unsigned int zq0cr1; + unsigned int zq1cr1; + unsigned int zq2cr1; + unsigned int pir_v1; + unsigned int pir_v2; +}; + +struct ddr3_emif_config { + unsigned int sdcfg; + unsigned int sdtim1; + unsigned int sdtim2; + unsigned int sdtim3; + unsigned int sdtim4; + unsigned int zqcfg; + unsigned int sdrfc; +}; + +void ddr3_init(void); +void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); +void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); + +#endif diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index 4e49143ec6..f8f986ca60 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -22,42 +22,6 @@ typedef volatile unsigned int dv_reg; typedef volatile unsigned int *dv_reg_p; -struct ddr3_phy_config { - unsigned int pllcr; - unsigned int pgcr1_mask; - unsigned int pgcr1_val; - unsigned int ptr0; - unsigned int ptr1; - unsigned int ptr2; - unsigned int ptr3; - unsigned int ptr4; - unsigned int dcr_mask; - unsigned int dcr_val; - unsigned int dtpr0; - unsigned int dtpr1; - unsigned int dtpr2; - unsigned int mr0; - unsigned int mr1; - unsigned int mr2; - unsigned int dtcr; - unsigned int pgcr2; - unsigned int zq0cr1; - unsigned int zq1cr1; - unsigned int zq2cr1; - unsigned int pir_v1; - unsigned int pir_v2; -}; - -struct ddr3_emif_config { - unsigned int sdcfg; - unsigned int sdtim1; - unsigned int sdtim2; - unsigned int sdtim3; - unsigned int sdtim4; - unsigned int zqcfg; - unsigned int sdrfc; -}; - #endif #define BIT(x) (1 << (x)) @@ -149,9 +113,6 @@ static inline int cpu_revision(void) void share_all_segments(int priv_id); int cpu_to_bus(u32 *ptr, u32 length); -void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); -void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); -void init_ddr3(void); void sdelay(unsigned long); #endif diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c index ef90f9d821..f910ebe032 100644 --- a/board/ti/k2hk_evm/board.c +++ b/board/ti/k2hk_evm/board.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -63,7 +64,7 @@ static struct pll_init_data pll_config[] = { int dram_init(void) { - init_ddr3(); + ddr3_init(); gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_MAX_RAM_BANK_SIZE); diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c index 6092eb8fe3..0085f291b5 100644 --- a/board/ti/k2hk_evm/ddr3.c +++ b/board/ti/k2hk_evm/ddr3.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -228,7 +229,7 @@ struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); -void init_ddr3(void) +void ddr3_init(void) { char dimm_name[32]; @@ -239,22 +240,26 @@ void init_ddr3(void) if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { init_pll(&ddr3a_400); if (cpu_revision() > 0) { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64); + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A); + ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + &ddr3_1600_64); printf("DRAM: Capacity 8 GiB (includes reported below)\n"); } else { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_32); + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32); + ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + &ddr3_1600_32); printf("DRAM: Capacity 4 GiB (includes reported below)\n"); } } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { init_pll(&ddr3a_333); if (cpu_revision() > 0) { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64); + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A); + ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + &ddr3_1333_64); } else { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_32); + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32); + ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + &ddr3_1333_32); } } else { printf("Unknown SO-DIMM. Cannot configure DDR3\n"); @@ -263,6 +268,6 @@ void init_ddr3(void) } init_pll(&ddr3b_333); - init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64); - init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); + ddr3_init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64); + ddr3_init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); } -- cgit From 101eec50f021a354487a511dc1f72691404b2b48 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 9 Jul 2014 19:48:41 +0300 Subject: keystone2: ddr: add DDR3 PHY configs updated for PG 2.0 Add DDR3 PHY configs updated for PG 2.0 Also add DDR3A PHY reset before init for PG2.0 SoCs. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/ddr3.c | 19 +++++++ arch/arm/include/asm/arch-keystone/ddr3.h | 1 + arch/arm/include/asm/arch-keystone/hardware.h | 2 + board/ti/k2hk_evm/ddr3.c | 80 ++++++++++++++++++++++++++- 4 files changed, 100 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c index bb16551eb2..b711b810cb 100644 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -8,6 +8,7 @@ */ #include +#include #include void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) @@ -67,3 +68,21 @@ void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET); __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET); } + +void ddr3_reset_ddrphy(void) +{ + u32 tmp; + + /* Assert DDR3A PHY reset */ + tmp = readl(K2HK_DDR3APLLCTL1); + tmp |= KS2_DDR3_PLLCTRL_PHY_RESET; + writel(tmp, K2HK_DDR3APLLCTL1); + + /* wait 10us to catch the reset */ + udelay(10); + + /* Release DDR3A PHY reset */ + tmp = readl(K2HK_DDR3APLLCTL1); + tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET; + __raw_writel(tmp, K2HK_DDR3APLLCTL1); +} diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h index 05b7e2920d..4d229a25fa 100644 --- a/arch/arm/include/asm/arch-keystone/ddr3.h +++ b/arch/arm/include/asm/arch-keystone/ddr3.h @@ -49,6 +49,7 @@ struct ddr3_emif_config { }; void ddr3_init(void); +void ddr3_reset_ddrphy(void); void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index f8f986ca60..db2d36bfb6 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -80,6 +80,8 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_DDR3_PMCTL_OFFSET 0x38 #define KS2_DDR3_ZQCFG_OFFSET 0xC8 +#define KS2_DDR3_PLLCTRL_PHY_RESET 0x80000000 + #define KS2_UART0_BASE 0x02530c00 #define KS2_UART1_BASE 0x02531000 diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c index 0085f291b5..b604266837 100644 --- a/board/ti/k2hk_evm/ddr3.c +++ b/board/ti/k2hk_evm/ddr3.c @@ -188,6 +188,61 @@ static struct ddr3_phy_config ddr3phy_1333_64 = { .pir_v2 = 0x0000FF81ul, }; /******************************************************/ + +/* DDR PHY Configs Updated for PG 2.0 + * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */ +static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x32868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0001005Dul, + .zq1cr1 = 0x0001005Bul, + .zq2cr1 = 0x0001005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x32857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0001005Dul, + .zq1cr1 = 0x0001005Bul, + .zq2cr1 = 0x0001005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + int get_dimm_params(char *dimm_name) { u8 spd_params[256]; @@ -240,7 +295,18 @@ void ddr3_init(void) if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { init_pll(&ddr3a_400); if (cpu_revision() > 0) { - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A); + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + &ddr3phy_1600_64A_pg2); + } else { + /* PG 1.1 */ + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + &ddr3phy_1600_64A); + } + ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64); printf("DRAM: Capacity 8 GiB (includes reported below)\n"); @@ -253,7 +319,17 @@ void ddr3_init(void) } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { init_pll(&ddr3a_333); if (cpu_revision() > 0) { - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A); + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + &ddr3phy_1333_64A_pg2); + } else { + /* PG 1.1 */ + ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + &ddr3phy_1333_64A); + } ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64); } else { -- cgit From 35c547c2bc59dd63cdf76f81abe26f68e9eaf7fb Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 9 Jul 2014 19:48:42 +0300 Subject: ARM: keystone2: keystone_nav: make it dependent on keystone driver This driver is needed in case if keystone driver is used. Currently only keystone_net driver uses it. So to avoid redundant code compilation make the keystone_nav dependent on keystone net driver. It also leads to compilation errors for boards that does't use it. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile index c4af252110..02ecf7e22c 100644 --- a/arch/arm/cpu/armv7/keystone/Makefile +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -10,7 +10,7 @@ obj-y += psc.o obj-y += clock.o obj-y += cmd_clock.o obj-y += cmd_mon.o -obj-y += keystone_nav.o +obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o obj-y += msmc.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-y += ddr3.o -- cgit From 4984bce41fe78da160ccdad573b09b40e277ec7a Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 9 Jul 2014 19:48:43 +0300 Subject: keystone2: move cpu_to_bus() to keystone.c The SoC related common functions in board.c should be placed to a common keystone.c arch file. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/Makefile | 1 + arch/arm/cpu/armv7/keystone/keystone.c | 28 ++++++++++++++++++++++++++++ board/ti/k2hk_evm/board.c | 14 -------------- 3 files changed, 29 insertions(+), 14 deletions(-) create mode 100644 arch/arm/cpu/armv7/keystone/keystone.c diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile index 02ecf7e22c..64e42a6e23 100644 --- a/arch/arm/cpu/armv7/keystone/Makefile +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o obj-y += msmc.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-y += ddr3.o +obj-y += keystone.o diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/cpu/armv7/keystone/keystone.c new file mode 100644 index 0000000000..48c869064e --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/keystone.c @@ -0,0 +1,28 @@ +/* + * Keystone EVM : Board initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +/** + * cpu_to_bus - swap bytes of the 32-bit data if the device is BE + * @ptr - array of data + * @length - lenght of data array + */ +int cpu_to_bus(u32 *ptr, u32 length) +{ + u32 i; + + if (!(readl(K2HK_DEVSTAT) & 0x1)) + for (i = 0; i < length; i++, ptr++) + *ptr = cpu_to_be32(*ptr); + + return 0; +} diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c index f910ebe032..3333eb067c 100644 --- a/board/ti/k2hk_evm/board.c +++ b/board/ti/k2hk_evm/board.c @@ -23,8 +23,6 @@ DECLARE_GLOBAL_DATA_PTR; -u32 device_big_endian; - unsigned int external_clk[ext_clk_count] = { [sys_clk] = 122880000, [alt_core_clk] = 125000000, @@ -136,18 +134,6 @@ int board_eth_init(bd_t *bis) } #endif -/* Byte swap the 32-bit data if the device is BE */ -int cpu_to_bus(u32 *ptr, u32 length) -{ - u32 i; - - if (device_big_endian) - for (i = 0; i < length; i++, ptr++) - *ptr = __swab32(*ptr); - - return 0; -} - #if defined(CONFIG_BOARD_EARLY_INIT_F) int board_early_init_f(void) { -- cgit From 7b26c1f608d3ef18b11ff0a07476155af4a6ab95 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 9 Jul 2014 19:48:44 +0300 Subject: keystone2: add possibility to turn off all dsps By default all DSPs are turned off, for another case option to turn off them is added in this commit. Also add command to turn off itself. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/keystone.c | 59 ++++++++++++++++++++++ arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 5 +- arch/arm/include/asm/arch-keystone/hardware.h | 6 +++ arch/arm/include/asm/arch-keystone/mon.h | 15 ++++++ 4 files changed, 83 insertions(+), 2 deletions(-) create mode 100644 arch/arm/include/asm/arch-keystone/mon.h diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/cpu/armv7/keystone/keystone.c index 48c869064e..1c8c038455 100644 --- a/arch/arm/cpu/armv7/keystone/keystone.c +++ b/arch/arm/cpu/armv7/keystone/keystone.c @@ -9,6 +9,9 @@ #include #include +#include +#include +#include #include /** @@ -26,3 +29,59 @@ int cpu_to_bus(u32 *ptr, u32 length) return 0; } + +static int turn_off_myself(void) +{ + printf("Turning off ourselves\r\n"); + mon_power_off(0); + + psc_disable_module(KS2_LPSC_TETRIS); + psc_disable_domain(KS2_TETRIS_PWR_DOMAIN); + + asm volatile ("isb\n" + "dsb\n" + "wfi\n"); + + printf("What! Should not see that\n"); + return 0; +} + +static void turn_off_all_dsps(int num_dsps) +{ + int i; + + for (i = 0; i < num_dsps; i++) { + if (psc_disable_module(i + KS2_LPSC_GEM_0)) + printf("Cannot disable module for #%d DSP", i); + + if (psc_disable_domain(i + 8)) + printf("Cannot disable domain for #%d DSP", i); + } +} + +int do_killme_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return turn_off_myself(); +} + +U_BOOT_CMD( + killme, 1, 0, do_killme_cmd, + "turn off main ARM core", + "turn off main ARM core. Should not live after that :(\n" +); + +int misc_init_r(void) +{ + char *env; + long ks2_debug = 0; + + env = getenv("ks2_debug"); + + if (env) + ks2_debug = simple_strtol(env, NULL, 0); + + if ((ks2_debug & DBG_LEAVE_DSPS_ON) == 0) + turn_off_all_dsps(KS2_NUM_DSPS); + + return 0; +} diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index 2cac633131..5e2f659e94 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -68,7 +68,6 @@ #define K2HK_LPSC_VUSR0 12 #define K2HK_LPSC_CHIP_SRSS 13 #define K2HK_LPSC_MSMC 14 -#define K2HK_LPSC_GEM_0 15 #define K2HK_LPSC_GEM_1 16 #define K2HK_LPSC_GEM_2 17 #define K2HK_LPSC_GEM_3 18 @@ -105,7 +104,6 @@ #define K2HK_LPSC_VUSR1 49 #define K2HK_LPSC_XGE 50 #define K2HK_LPSC_ARM_SREFLEX 51 -#define K2HK_LPSC_TETRIS 52 /* DDR3A definitions */ #define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000 @@ -137,4 +135,7 @@ /* MSMC control */ #define K2HK_MSMC_CTRL_BASE 0x0bc00000 +/* Number of DSP cores */ +#define KS2_NUM_DSPS 8 + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index db2d36bfb6..0dcc31a645 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -87,11 +87,17 @@ typedef volatile unsigned int *dv_reg_p; /* PSC */ #define KS2_PSC_BASE 0x02350000 +#define KS2_LPSC_GEM_0 15 +#define KS2_LPSC_TETRIS 52 +#define KS2_TETRIS_PWR_DOMAIN 31 /* AEMIF */ #define KS2_AEMIF_CNTRL_BASE 0x21000a00 #define DAVINCI_ASYNC_EMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE +/* Flag from ks2_debug options to check if DSPs need to stay ON */ +#define DBG_LEAVE_DSPS_ON 0x1 + #ifdef CONFIG_SOC_K2HK #include #endif diff --git a/arch/arm/include/asm/arch-keystone/mon.h b/arch/arm/include/asm/arch-keystone/mon.h new file mode 100644 index 0000000000..33a28764bc --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/mon.h @@ -0,0 +1,15 @@ +/* + * K2HK: secure kernel command header file + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MON_H_ +#define _MON_H_ + +int mon_power_off(int core_id); + +#endif -- cgit From 3d315386255f6d944c0ccb4c7c8819ce604429ab Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 9 Jul 2014 23:44:44 +0300 Subject: k2hk: use common KS2_ prefix for all hardware definitions Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and add KS2_ prefix where it's needed. It requires to change names also in places where they're used. Align lines and remove redundant definitions in kardware-k2hk.h at the same time. Using common KS2_ prefix helps resolve redundant redefinitions and adds opportunity to use KS2_ definition across a project not thinking about what SoC should be used. It's more convenient and we don't need to worry about the SoC type in common files, hardware.h will think about that. The hardware.h decides definitions of what SoC to use. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/clock.c | 24 +-- arch/arm/cpu/armv7/keystone/ddr3.c | 8 +- arch/arm/cpu/armv7/keystone/init.c | 4 +- arch/arm/cpu/armv7/keystone/keystone.c | 2 +- arch/arm/cpu/armv7/keystone/msmc.c | 2 +- arch/arm/include/asm/arch-keystone/clock-k2hk.h | 2 +- arch/arm/include/asm/arch-keystone/clock_defs.h | 2 +- arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 202 ++++++++++----------- arch/arm/include/asm/arch-keystone/hardware.h | 4 +- board/ti/k2hk_evm/ddr3.c | 24 +-- include/configs/k2hk_evm.h | 12 +- 11 files changed, 138 insertions(+), 148 deletions(-) diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index bfa4c9d8f6..f905fdcf0d 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -29,11 +29,11 @@ struct pll_regs { }; static const struct pll_regs pll_regs[] = { - [CORE_PLL] = { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1}, - [PASS_PLL] = { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1}, - [TETRIS_PLL] = { K2HK_ARMPLLCTL0, K2HK_ARMPLLCTL1}, - [DDR3A_PLL] = { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1}, - [DDR3B_PLL] = { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1}, + [CORE_PLL] = { KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, + [PASS_PLL] = { KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, + [TETRIS_PLL] = { KS2_ARMPLLCTL0, KS2_ARMPLLCTL1}, + [DDR3A_PLL] = { KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, + [DDR3B_PLL] = { KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1}, }; /* Fout = Fref * NF(mult) / NR(prediv) / OD */ @@ -47,7 +47,7 @@ static unsigned long pll_freq_get(int pll) ret = external_clk[sys_clk]; if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { /* PLL mode */ - tmp = __raw_readl(K2HK_MAINPLLCTL0); + tmp = __raw_readl(KS2_MAINPLLCTL0); prediv = (tmp & PLL_DIV_MASK) + 1; mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | (pllctl_reg_read(pll, mult) & @@ -61,19 +61,19 @@ static unsigned long pll_freq_get(int pll) switch (pll) { case PASS_PLL: ret = external_clk[pa_clk]; - reg = K2HK_PASSPLLCTL0; + reg = KS2_PASSPLLCTL0; break; case TETRIS_PLL: ret = external_clk[tetris_clk]; - reg = K2HK_ARMPLLCTL0; + reg = KS2_ARMPLLCTL0; break; case DDR3A_PLL: ret = external_clk[ddr3a_clk]; - reg = K2HK_DDR3APLLCTL0; + reg = KS2_DDR3APLLCTL0; break; case DDR3B_PLL: ret = external_clk[ddr3b_clk]; - reg = K2HK_DDR3BPLLCTL0; + reg = KS2_DDR3BPLLCTL0; break; default: return 0; @@ -214,7 +214,7 @@ void init_pll(const struct pll_init_data *data) * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass) * only applicable for Kepler */ - clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN); + clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); /* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */ setbits_le32(pll_regs[data->pll].reg1 , PLL_PLLRST | PLLCTL_ENSAT); @@ -255,7 +255,7 @@ void init_pll(const struct pll_init_data *data) * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass) * only applicable for Kepler */ - setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN); + setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); } else { setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT); /* diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c index b711b810cb..2391e794e8 100644 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -74,15 +74,15 @@ void ddr3_reset_ddrphy(void) u32 tmp; /* Assert DDR3A PHY reset */ - tmp = readl(K2HK_DDR3APLLCTL1); + tmp = readl(KS2_DDR3APLLCTL1); tmp |= KS2_DDR3_PLLCTRL_PHY_RESET; - writel(tmp, K2HK_DDR3APLLCTL1); + writel(tmp, KS2_DDR3APLLCTL1); /* wait 10us to catch the reset */ udelay(10); /* Release DDR3A PHY reset */ - tmp = readl(K2HK_DDR3APLLCTL1); + tmp = readl(KS2_DDR3APLLCTL1); tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET; - __raw_writel(tmp, K2HK_DDR3APLLCTL1); + __raw_writel(tmp, KS2_DDR3APLLCTL1); } diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c index 4df5ae1cae..f4c293aa89 100644 --- a/arch/arm/cpu/armv7/keystone/init.c +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -15,8 +15,8 @@ void chip_configuration_unlock(void) { - __raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0); - __raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1); + __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0); + __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1); } int arch_cpu_init(void) diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/cpu/armv7/keystone/keystone.c index 1c8c038455..11a9357db4 100644 --- a/arch/arm/cpu/armv7/keystone/keystone.c +++ b/arch/arm/cpu/armv7/keystone/keystone.c @@ -23,7 +23,7 @@ int cpu_to_bus(u32 *ptr, u32 length) { u32 i; - if (!(readl(K2HK_DEVSTAT) & 0x1)) + if (!(readl(KS2_DEVSTAT) & 0x1)) for (i = 0; i < length; i++, ptr++) *ptr = cpu_to_be32(*ptr); diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c index f3f1621d20..af858fa758 100644 --- a/arch/arm/cpu/armv7/keystone/msmc.c +++ b/arch/arm/cpu/armv7/keystone/msmc.c @@ -58,7 +58,7 @@ struct msms_regs { void share_all_segments(int priv_id) { - struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE; + struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE; int j; for (j = 0; j < 8; j++) { diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h index 6a69a8d2be..ed1225c298 100644 --- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h @@ -56,7 +56,7 @@ enum clk_e { sys_clk3_clk }; -#define K2HK_CLK1_6 sys_clk0_6_clk +#define KS2_CLK1_6 sys_clk0_6_clk /* PLL identifiers */ enum pll_type_e { diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h index b251aff383..e545341ca7 100644 --- a/arch/arm/include/asm/arch-keystone/clock_defs.h +++ b/arch/arm/include/asm/arch-keystone/clock_defs.h @@ -50,7 +50,7 @@ struct pllctl_regs { }; static struct pllctl_regs *pllctl_regs[] = { - (struct pllctl_regs *)(CLOCK_BASE + 0x100) + (struct pllctl_regs *)(KS2_CLOCK_BASE + 0x100) }; #define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index 5e2f659e94..e7dff059b8 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -6,134 +6,124 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #ifndef __ASM_ARCH_HARDWARE_K2HK_H #define __ASM_ARCH_HARDWARE_K2HK_H -#define K2HK_PLL_CNTRL_BASE 0x02310000 -#define CLOCK_BASE K2HK_PLL_CNTRL_BASE -#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8) -#define KS2_RSTCTRL_KEY 0x5a69 -#define KS2_RSTCTRL_MASK 0xffff0000 -#define KS2_RSTCTRL_SWRST 0xfffe0000 +#define KS2_PLL_CNTRL_BASE 0x02310000 +#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE +#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8) +#define KS2_RSTCTRL_KEY 0x5a69 +#define KS2_RSTCTRL_MASK 0xffff0000 +#define KS2_RSTCTRL_SWRST 0xfffe0000 -#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 -#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) -#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) +#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 +#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) +#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) -#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) +#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) -#define ARM_PLL_EN BIT(13) +#define KS2_ARM_PLL_EN BIT(13) -#define K2HK_SPI0_BASE 0x21000400 -#define K2HK_SPI1_BASE 0x21000600 -#define K2HK_SPI2_BASE 0x21000800 -#define K2HK_SPI_BASE K2HK_SPI0_BASE +#define KS2_SPI0_BASE 0x21000400 +#define KS2_SPI1_BASE 0x21000600 +#define KS2_SPI2_BASE 0x21000800 +#define KS2_SPI_BASE KS2_SPI0_BASE /* Chip configuration unlock codes and registers */ -#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) -#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) -#define KEYSTONE_KICK0_MAGIC 0x83e70b13 -#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0 +#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) +#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) +#define KS2_KICK0_MAGIC 0x83e70b13 +#define KS2_KICK1_MAGIC 0x95a4f1e0 /* PA SS Registers */ -#define KS2_PASS_BASE 0x02000000 +#define KS2_PASS_BASE 0x02000000 /* PLL control registers */ -#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) -#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) -#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) -#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) -#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) -#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) -#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) -#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) -#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) -#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) +#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) +#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) +#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) +#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) +#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) +#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) +#define KS2_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) +#define KS2_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) +#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) +#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) /* Power and Sleep Controller (PSC) Domains */ -#define K2HK_LPSC_MOD 0 -#define K2HK_LPSC_DUMMY1 1 -#define K2HK_LPSC_USB 2 -#define K2HK_LPSC_EMIF25_SPI 3 -#define K2HK_LPSC_TSIP 4 -#define K2HK_LPSC_DEBUGSS_TRC 5 -#define K2HK_LPSC_TETB_TRC 6 -#define K2HK_LPSC_PKTPROC 7 -#define KS2_LPSC_PA K2HK_LPSC_PKTPROC -#define K2HK_LPSC_SGMII 8 -#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII -#define K2HK_LPSC_CRYPTO 9 -#define K2HK_LPSC_PCIE 10 -#define K2HK_LPSC_SRIO 11 -#define K2HK_LPSC_VUSR0 12 -#define K2HK_LPSC_CHIP_SRSS 13 -#define K2HK_LPSC_MSMC 14 -#define K2HK_LPSC_GEM_1 16 -#define K2HK_LPSC_GEM_2 17 -#define K2HK_LPSC_GEM_3 18 -#define K2HK_LPSC_GEM_4 19 -#define K2HK_LPSC_GEM_5 20 -#define K2HK_LPSC_GEM_6 21 -#define K2HK_LPSC_GEM_7 22 -#define K2HK_LPSC_EMIF4F_DDR3A 23 -#define K2HK_LPSC_EMIF4F_DDR3B 24 -#define K2HK_LPSC_TAC 25 -#define K2HK_LPSC_RAC 26 -#define K2HK_LPSC_RAC_1 27 -#define K2HK_LPSC_FFTC_A 28 -#define K2HK_LPSC_FFTC_B 29 -#define K2HK_LPSC_FFTC_C 30 -#define K2HK_LPSC_FFTC_D 31 -#define K2HK_LPSC_FFTC_E 32 -#define K2HK_LPSC_FFTC_F 33 -#define K2HK_LPSC_AI2 34 -#define K2HK_LPSC_TCP3D_0 35 -#define K2HK_LPSC_TCP3D_1 36 -#define K2HK_LPSC_TCP3D_2 37 -#define K2HK_LPSC_TCP3D_3 38 -#define K2HK_LPSC_VCP2X4_A 39 -#define K2HK_LPSC_CP2X4_B 40 -#define K2HK_LPSC_VCP2X4_C 41 -#define K2HK_LPSC_VCP2X4_D 42 -#define K2HK_LPSC_VCP2X4_E 43 -#define K2HK_LPSC_VCP2X4_F 44 -#define K2HK_LPSC_VCP2X4_G 45 -#define K2HK_LPSC_VCP2X4_H 46 -#define K2HK_LPSC_BCP 47 -#define K2HK_LPSC_DXB 48 -#define K2HK_LPSC_VUSR1 49 -#define K2HK_LPSC_XGE 50 -#define K2HK_LPSC_ARM_SREFLEX 51 +#define KS2_LPSC_MOD 0 +#define KS2_LPSC_DUMMY1 1 +#define KS2_LPSC_USB 2 +#define KS2_LPSC_EMIF25_SPI 3 +#define KS2_LPSC_TSIP 4 +#define KS2_LPSC_DEBUGSS_TRC 5 +#define KS2_LPSC_TETB_TRC 6 +#define KS2_LPSC_PKTPROC 7 +#define KS2_LPSC_PA KS2_LPSC_PKTPROC +#define KS2_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII +#define KS2_LPSC_CRYPTO 9 +#define KS2_LPSC_PCIE 10 +#define KS2_LPSC_SRIO 11 +#define KS2_LPSC_VUSR0 12 +#define KS2_LPSC_CHIP_SRSS 13 +#define KS2_LPSC_MSMC 14 +#define KS2_LPSC_GEM_1 16 +#define KS2_LPSC_GEM_2 17 +#define KS2_LPSC_GEM_3 18 +#define KS2_LPSC_GEM_4 19 +#define KS2_LPSC_GEM_5 20 +#define KS2_LPSC_GEM_6 21 +#define KS2_LPSC_GEM_7 22 +#define KS2_LPSC_EMIF4F_DDR3A 23 +#define KS2_LPSC_EMIF4F_DDR3B 24 +#define KS2_LPSC_TAC 25 +#define KS2_LPSC_RAC 26 +#define KS2_LPSC_RAC_1 27 +#define KS2_LPSC_FFTC_A 28 +#define KS2_LPSC_FFTC_B 29 +#define KS2_LPSC_FFTC_C 30 +#define KS2_LPSC_FFTC_D 31 +#define KS2_LPSC_FFTC_E 32 +#define KS2_LPSC_FFTC_F 33 +#define KS2_LPSC_AI2 34 +#define KS2_LPSC_TCP3D_0 35 +#define KS2_LPSC_TCP3D_1 36 +#define KS2_LPSC_TCP3D_2 37 +#define KS2_LPSC_TCP3D_3 38 +#define KS2_LPSC_VCP2X4_A 39 +#define KS2_LPSC_CP2X4_B 40 +#define KS2_LPSC_VCP2X4_C 41 +#define KS2_LPSC_VCP2X4_D 42 +#define KS2_LPSC_VCP2X4_E 43 +#define KS2_LPSC_VCP2X4_F 44 +#define KS2_LPSC_VCP2X4_G 45 +#define KS2_LPSC_VCP2X4_H 46 +#define KS2_LPSC_BCP 47 +#define KS2_LPSC_DXB 48 +#define KS2_LPSC_VUSR1 49 +#define KS2_LPSC_XGE 50 +#define KS2_LPSC_ARM_SREFLEX 51 /* DDR3A definitions */ -#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000 -#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000 -#define K2HK_DDR3A_DDRPHYC 0x02329000 +#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000 +#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000 +#define KS2_DDR3A_DDRPHYC 0x02329000 /* DDR3B definitions */ -#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000 -#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000 -#define K2HK_DDR3B_DDRPHYC 0x02328000 +#define KS2_DDR3B_EMIF_CTRL_BASE 0x21020000 +#define KS2_DDR3B_EMIF_DATA_BASE 0x60000000 +#define KS2_DDR3B_DDRPHYC 0x02328000 /* Queue manager */ -#define DEVICE_QM_MANAGER_BASE 0x02a02000 -#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000 -#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000 -#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 -#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000 -#define DEVICE_QM_NUM_LINKRAMS 2 -#define DEVICE_QM_NUM_MEMREGIONS 20 - -#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000 -#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400 -#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800 -#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000 - -#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24 -#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32 -#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9 +#define KS2_QM_MANAGER_BASE 0x02a02000 +#define KS2_QM_DESC_SETUP_BASE 0x02a03000 +#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000 +#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 +#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000 /* MSMC control */ -#define K2HK_MSMC_CTRL_BASE 0x0bc00000 +#define KS2_MSMC_CTRL_BASE 0x0bc00000 /* Number of DSP cores */ #define KS2_NUM_DSPS 8 diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index 0dcc31a645..133edadc2a 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -105,7 +105,7 @@ typedef volatile unsigned int *dv_reg_p; #ifndef __ASSEMBLY__ static inline int cpu_is_k2hk(void) { - unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); unsigned int part_no = (jtag_id >> 12) & 0xffff; return (part_no == 0xb981) ? 1 : 0; @@ -113,7 +113,7 @@ static inline int cpu_is_k2hk(void) static inline int cpu_revision(void) { - unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); unsigned int rev = (jtag_id >> 28) & 0xf; return rev; diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c index b604266837..31e9c31ea2 100644 --- a/board/ti/k2hk_evm/ddr3.c +++ b/board/ti/k2hk_evm/ddr3.c @@ -299,20 +299,20 @@ void ddr3_init(void) /* PG 2.0 */ /* Reset DDR3A PHY after PLL enabled */ ddr3_reset_ddrphy(); - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_64A_pg2); } else { /* PG 1.1 */ - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_64A); } - ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64); printf("DRAM: Capacity 8 GiB (includes reported below)\n"); } else { - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32); - ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_32); printf("DRAM: Capacity 4 GiB (includes reported below)\n"); } @@ -323,18 +323,18 @@ void ddr3_init(void) /* PG 2.0 */ /* Reset DDR3A PHY after PLL enabled */ ddr3_reset_ddrphy(); - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_64A_pg2); } else { /* PG 1.1 */ - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_64A); } - ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64); } else { - ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32); - ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_32); } } else { @@ -344,6 +344,6 @@ void ddr3_init(void) } init_pll(&ddr3b_333); - ddr3_init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64); - ddr3_init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); + ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64); + ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); } diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 63e02495e1..bacf3bca9d 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -73,7 +73,7 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE #define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6) +#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 @@ -83,16 +83,16 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI0 -#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE +#define CONFIG_SYS_SPI_BASE KS2_SPI_BASE #define CONFIG_SYS_SPI0_NUM_CS 4 #define CONFIG_SYS_SPI1 -#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE +#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE #define CONFIG_SYS_SPI1_NUM_CS 4 #define CONFIG_SYS_SPI2 #define CONFIG_SYS_SPI2_NUM_CS 4 -#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE +#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE #define CONFIG_CMD_SPI -#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI) +#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI) #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED @@ -264,6 +264,6 @@ /* we may include files below only after all above definitions */ #include #include -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6) +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6) #endif /* __CONFIG_K2HK_EVM_H */ -- cgit From 0bedbb81351193f1507ad127b6b26e19a93c2c42 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Wed, 9 Jul 2014 23:44:45 +0300 Subject: keystone2: add env option to do unitrd dt fixup With latest v3.13 kernel, unitrd dt fixup is not needed. However for older kernel versions such as v3.8/v3.10, it is needed. So to work with both, add a u-boot env variable that can be set to do dt fixup for older kernels. Signed-off-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- board/ti/k2hk_evm/board.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c index 3333eb067c..646ecb37e7 100644 --- a/board/ti/k2hk_evm/board.c +++ b/board/ti/k2hk_evm/board.c @@ -157,11 +157,14 @@ void ft_board_setup(void *blob, bd_t *bd) u64 size[2]; char name[32], *env, *endp; int lpae, nodeoffset; + int unitrd_fixup = 0; u32 ddr3a_size; int nbanks; env = getenv("mem_lpae"); lpae = env && simple_strtol(env, NULL, 0); + env = getenv("uinitrd_fixup"); + unitrd_fixup = env && simple_strtol(env, NULL, 0); ddr3a_size = 0; if (lpae) { @@ -204,10 +207,11 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory_banks(blob, start, size, nbanks); /* Fix up the initrd */ - if (lpae) { + if (lpae && unitrd_fixup) { u64 initrd_start, initrd_end; u32 *prop1, *prop2; int err; + nodeoffset = fdt_path_offset(blob, "/chosen"); if (nodeoffset >= 0) { prop1 = (u32 *)fdt_getprop(blob, nodeoffset, -- cgit From e595107ebbdeb3e50351e703cce08eb07f70c614 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 9 Jul 2014 23:44:46 +0300 Subject: ARM: keystone2: move K2HK board files to common KS2 board directory This patch moves K2HK board directory to a common Keystone II board directory. The Board related common functions are moved to a common keystone board file. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- board/ti/k2hk_evm/Makefile | 9 -- board/ti/k2hk_evm/README | 148 ------------------ board/ti/k2hk_evm/board.c | 292 ----------------------------------- board/ti/k2hk_evm/ddr3.c | 349 ------------------------------------------ board/ti/ks2_evm/Makefile | 10 ++ board/ti/ks2_evm/README_K2HK | 148 ++++++++++++++++++ board/ti/ks2_evm/board.c | 229 +++++++++++++++++++++++++++ board/ti/ks2_evm/board.h | 19 +++ board/ti/ks2_evm/board_k2hk.c | 81 ++++++++++ board/ti/ks2_evm/ddr3_k2hk.c | 349 ++++++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/k2hk_evm.h | 1 + 12 files changed, 838 insertions(+), 799 deletions(-) delete mode 100644 board/ti/k2hk_evm/Makefile delete mode 100644 board/ti/k2hk_evm/README delete mode 100644 board/ti/k2hk_evm/board.c delete mode 100644 board/ti/k2hk_evm/ddr3.c create mode 100644 board/ti/ks2_evm/Makefile create mode 100644 board/ti/ks2_evm/README_K2HK create mode 100644 board/ti/ks2_evm/board.c create mode 100644 board/ti/ks2_evm/board.h create mode 100644 board/ti/ks2_evm/board_k2hk.c create mode 100644 board/ti/ks2_evm/ddr3_k2hk.c diff --git a/board/ti/k2hk_evm/Makefile b/board/ti/k2hk_evm/Makefile deleted file mode 100644 index 3645f2feb0..0000000000 --- a/board/ti/k2hk_evm/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# K2HK-EVM: board Makefile -# (C) Copyright 2012-2014 -# Texas Instruments Incorporated, -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += board.o -obj-y += ddr3.o diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README deleted file mode 100644 index 7426b8dc97..0000000000 --- a/board/ti/k2hk_evm/README +++ /dev/null @@ -1,148 +0,0 @@ -U-Boot port for Texas Instruments XTCIEVMK2X -============================================ - -Author: Murali Karicheri - -This README has information on the u-boot port for XTCIEVMK2X EVM board. -Documentation for this board can be found at - http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx - -The board is based on Texas Instruments Keystone2 family of SoCs : K2H, K2K. -More details on these SoCs are available at company websites - K2K: http://www.ti.com/product/tci6638k2k - K2H: http://www.ti.com/product/tci6638k2h - -Board configuration: -==================== - -Some of the peripherals that are configured by u-boot are:- - -1. 2GB DDR3 (can support 8GB SO DIMM as well) -2. 512M NAND (over ti emif16 bus) -3. 6MB MSM SRAM (part of the SoC) -4. two 1GBit Ethernet ports (SoC supports upto 4) -5. two UART ports -6. three i2c interfaces -7. three spi interfaces (only 1 interface supported in driver) - -There are seperate PLLs to drive clocks to Tetris ARM and Peripherals. -To bring up SMP Linux on this board, there is a boot monitor -code that will be installed in MSMC SRAM. There is command available -to install this image from u-boot. - -The port related files can be found at following folders - keystone2 SoC related files: arch/arm/cpu/armv7/keystone/ - K2HK evm board files: board/ti/k2hk_evm/ - -board configuration file: include/configs/k2hk_evm.h - -Supported boot modes: - - SPI NOR boot - - AEMIF NAND boot - -Supported image formats:- - - u-boot.bin: for loading and running u-boot.bin through Texas instruments - code composure studio (CCS) - - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot - - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot - -Build instructions: -=================== - -To build u-boot.bin - >make k2hk_evm_config - >make u-boot-spi.gph - -To build u-boot-spi.gph - >make k2hk_evm_config - >make u-boot-spi.gph - -To build u-boot-nand.gph - >make k2hk_evm_config - >make u-boot-nand.gph - -Load and Run U-Boot on K2HK EVM using CCS -========================================= - -Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin -on EVM. See instructions at below link for installing CCS on a Windows PC. -http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started# -Installing_Code_Composer_Studio -Use u-boot.bin from the build folder for loading annd running u-boot binary -on EVM. Follow instructions at -http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup -to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" -and Power ON the EVM. Follow instructions to connect serial port of EVM to -PC and start TeraTerm or Hyper Terminal. - -Start CCS on a Windows machine and Launch Target -configuration as instructed at http://processors.wiki.ti.com/index.php/ -MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS. -The instructions provided in the above link uses a script for -loading the u-boot binary on the target EVM. Instead do the following:- - -1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D - isconnected: Unknown)" at the debug window (This is created once Target - configuration is launched) and select "Connect Target". -2. Once target connect is successful, choose Tools->Load Memory option from the - top level menu. At the Load Memory window, choose the file u-boot.bin - through "Browse" button and click "next >" button. In the next window, enter - Start address as 0xc001000, choose Type-size "32 bits" and click "Finish" - button. -3. Click View -> Registers from the top level menu to view registers window. -4. From Registers, window expand "Core Registers" to view PC. Edit PC value - to be 0xc001000. From the "Run" top level menu, select "Free Run" -5. The U-Boot prompt is shown at the Tera Term/ Hyper terminal console as - below and type any key to stop autoboot as instructed := - -U-Boot 2014.04-rc1-00201-gc215b5a (Mar 21 2014 - 12:47:59) - -I2C: ready -Detected SO-DIMM [SQR-SD3T-2G1333SED] -DRAM: 1.1 GiB -NAND: 512 MiB -Net: K2HK_EMAC -Warning: K2HK_EMAC using MAC address from net device -, K2HK_EMAC1, K2HK_EMAC2, K2HK_EMAC3 -Hit any key to stop autoboot: 0 - -SPI NOR Flash programming instructions -====================================== -U-Boot image can be flashed to first 512KB of the NOR flash using following -instructions:- - -1. Start CCS and run U-boot as described above. -2. Suspend Target. Select Run -> Suspend from top level menu - CortexA15_1 (Free Running)" -3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 - through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM - using CCS", but using address 0x87000000. -4. Free Run the target as desribed earlier (step 4) to get u-boot prompt -5. At the U-Boot console type following to setup u-boot environment variables. - setenv addr_uboot 0x87000000 - setenv filesize - run burn_uboot_spi - Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch - to "SPI Little Endian Boot mode" as per instruction at - http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. -6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. - -AEMIF NAND Flash programming instructions -====================================== -U-Boot image can be flashed to first 1024KB of the NAND flash using following -instructions:- - -1. Start CCS and run U-boot as described above. -2. Suspend Target. Select Run -> Suspend from top level menu - CortexA15_1 (Free Running)" -3. Load u-boot-nand.gph binary from build folder on to DDR address 0x87000000 - through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM - using CCS", but using address 0x87000000. -4. Free Run the target as desribed earlier (step 4) to get u-boot prompt -5. At the U-Boot console type following to setup u-boot environment variables. - setenv filesize - run burn_uboot_nand - Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch - to "ARM NAND Boot mode" as per instruction at - http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. -6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash. diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c deleted file mode 100644 index 646ecb37e7..0000000000 --- a/board/ti/k2hk_evm/board.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * K2HK EVM : Board initialization - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -unsigned int external_clk[ext_clk_count] = { - [sys_clk] = 122880000, - [alt_core_clk] = 125000000, - [pa_clk] = 122880000, - [tetris_clk] = 125000000, - [ddr3a_clk] = 100000000, - [ddr3b_clk] = 100000000, - [mcm_clk] = 312500000, - [pcie_clk] = 100000000, - [sgmii_srio_clk] = 156250000, - [xgmii_clk] = 156250000, - [usb_clk] = 100000000, - [rp1_clk] = 123456789 /* TODO: cannot find - what is that */ -}; - -static struct aemif_config aemif_configs[] = { - { /* CS0 */ - .mode = AEMIF_MODE_NAND, - .wr_setup = 0xf, - .wr_strobe = 0x3f, - .wr_hold = 7, - .rd_setup = 0xf, - .rd_strobe = 0x3f, - .rd_hold = 7, - .turn_around = 3, - .width = AEMIF_WIDTH_8, - }, - -}; - -static struct pll_init_data pll_config[] = { - CORE_PLL_1228, - PASS_PLL_983, - TETRIS_PLL_1200, -}; - -int dram_init(void) -{ - ddr3_init(); - - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - CONFIG_MAX_RAM_BANK_SIZE); - aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs); - return 0; -} - -#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET -struct eth_priv_t eth_priv_cfg[] = { - { - .int_name = "K2HK_EMAC", - .rx_flow = 22, - .phy_addr = 0, - .slave_port = 1, - .sgmii_link_type = SGMII_LINK_MAC_PHY, - }, - { - .int_name = "K2HK_EMAC1", - .rx_flow = 23, - .phy_addr = 1, - .slave_port = 2, - .sgmii_link_type = SGMII_LINK_MAC_PHY, - }, - { - .int_name = "K2HK_EMAC2", - .rx_flow = 24, - .phy_addr = 2, - .slave_port = 3, - .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, - }, - { - .int_name = "K2HK_EMAC3", - .rx_flow = 25, - .phy_addr = 3, - .slave_port = 4, - .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, - }, -}; - -int get_eth_env_param(char *env_name) -{ - char *env; - int res = -1; - - env = getenv(env_name); - if (env) - res = simple_strtol(env, NULL, 0); - - return res; -} - -int board_eth_init(bd_t *bis) -{ - int j; - int res; - char link_type_name[32]; - - for (j = 0; j < (sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t)); - j++) { - sprintf(link_type_name, "sgmii%d_link_type", j); - res = get_eth_env_param(link_type_name); - if (res >= 0) - eth_priv_cfg[j].sgmii_link_type = res; - - keystone2_emac_initialize(ð_priv_cfg[j]); - } - - return 0; -} -#endif - -#if defined(CONFIG_BOARD_EARLY_INIT_F) -int board_early_init_f(void) -{ - init_plls(ARRAY_SIZE(pll_config), pll_config); - return 0; -} -#endif - -int board_init(void) -{ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -#define K2_DDR3_START_ADDR 0x80000000 -void ft_board_setup(void *blob, bd_t *bd) -{ - u64 start[2]; - u64 size[2]; - char name[32], *env, *endp; - int lpae, nodeoffset; - int unitrd_fixup = 0; - u32 ddr3a_size; - int nbanks; - - env = getenv("mem_lpae"); - lpae = env && simple_strtol(env, NULL, 0); - env = getenv("uinitrd_fixup"); - unitrd_fixup = env && simple_strtol(env, NULL, 0); - - ddr3a_size = 0; - if (lpae) { - env = getenv("ddr3a_size"); - if (env) - ddr3a_size = simple_strtol(env, NULL, 10); - if ((ddr3a_size != 8) && (ddr3a_size != 4)) - ddr3a_size = 0; - } - - nbanks = 1; - start[0] = bd->bi_dram[0].start; - size[0] = bd->bi_dram[0].size; - - /* adjust memory start address for LPAE */ - if (lpae) { - start[0] -= K2_DDR3_START_ADDR; - start[0] += CONFIG_SYS_LPAE_SDRAM_BASE; - } - - if ((size[0] == 0x80000000) && (ddr3a_size != 0)) { - size[1] = ((u64)ddr3a_size - 2) << 30; - start[1] = 0x880000000; - nbanks++; - } - - /* reserve memory at start of bank */ - sprintf(name, "mem_reserve_head"); - env = getenv(name); - if (env) { - start[0] += ustrtoul(env, &endp, 0); - size[0] -= ustrtoul(env, &endp, 0); - } - - sprintf(name, "mem_reserve"); - env = getenv(name); - if (env) - size[0] -= ustrtoul(env, &endp, 0); - - fdt_fixup_memory_banks(blob, start, size, nbanks); - - /* Fix up the initrd */ - if (lpae && unitrd_fixup) { - u64 initrd_start, initrd_end; - u32 *prop1, *prop2; - int err; - - nodeoffset = fdt_path_offset(blob, "/chosen"); - if (nodeoffset >= 0) { - prop1 = (u32 *)fdt_getprop(blob, nodeoffset, - "linux,initrd-start", NULL); - prop2 = (u32 *)fdt_getprop(blob, nodeoffset, - "linux,initrd-end", NULL); - if (prop1 && prop2) { - initrd_start = __be32_to_cpu(*prop1); - initrd_start -= K2_DDR3_START_ADDR; - initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE; - initrd_start = __cpu_to_be64(initrd_start); - initrd_end = __be32_to_cpu(*prop2); - initrd_end -= K2_DDR3_START_ADDR; - initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE; - initrd_end = __cpu_to_be64(initrd_end); - - err = fdt_delprop(blob, nodeoffset, - "linux,initrd-start"); - if (err < 0) - puts("error deleting initrd-start\n"); - - err = fdt_delprop(blob, nodeoffset, - "linux,initrd-end"); - if (err < 0) - puts("error deleting initrd-end\n"); - - err = fdt_setprop(blob, nodeoffset, - "linux,initrd-start", - &initrd_start, - sizeof(initrd_start)); - if (err < 0) - puts("error adding initrd-start\n"); - - err = fdt_setprop(blob, nodeoffset, - "linux,initrd-end", - &initrd_end, - sizeof(initrd_end)); - if (err < 0) - puts("error adding linux,initrd-end\n"); - } - } - } -} - -void ft_board_setup_ex(void *blob, bd_t *bd) -{ - int lpae; - char *env; - u64 *reserve_start, size; - - env = getenv("mem_lpae"); - lpae = env && simple_strtol(env, NULL, 0); - - if (lpae) { - /* - * the initrd and other reserved memory areas are - * embedded in in the DTB itslef. fix up these addresses - * to 36 bit format - */ - reserve_start = (u64 *)((char *)blob + - fdt_off_mem_rsvmap(blob)); - while (1) { - *reserve_start = __cpu_to_be64(*reserve_start); - size = __cpu_to_be64(*(reserve_start + 1)); - if (size) { - *reserve_start -= K2_DDR3_START_ADDR; - *reserve_start += - CONFIG_SYS_LPAE_SDRAM_BASE; - *reserve_start = - __cpu_to_be64(*reserve_start); - } else { - break; - } - reserve_start += 2; - } - } -} -#endif diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c deleted file mode 100644 index 31e9c31ea2..0000000000 --- a/board/ti/k2hk_evm/ddr3.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * Keystone2: DDR3 initialization - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1600_64A = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x12868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1600_64 = { - .sdcfg = 0x6200CE6aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001869ul, -}; - -static struct ddr3_phy_config ddr3phy_1600_32 = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x12868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1600_32 = { - .sdcfg = 0x6200DE6aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0x70073200ul, - .sdrfc = 0x00001869ul, -}; - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1333_64A = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | - NOSRA_MASK | UDIMM_MASK), - .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1333_64 = { - .sdcfg = 0x62008C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001457ul, -}; - -static struct ddr3_phy_config ddr3phy_1333_32 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | - NOSRA_MASK | UDIMM_MASK), - .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1333_32 = { - .sdcfg = 0x62009C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0xf0073200ul, - .sdrfc = 0x00001457ul, -}; - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1333_64 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; -/******************************************************/ - -/* DDR PHY Configs Updated for PG 2.0 - * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */ -static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x32868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0001005Dul, - .zq1cr1 = 0x0001005Bul, - .zq2cr1 = 0x0001005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x32857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0001005Dul, - .zq1cr1 = 0x0001005Bul, - .zq2cr1 = 0x0001005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -int get_dimm_params(char *dimm_name) -{ - u8 spd_params[256]; - int ret; - int old_bus; - - i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); - - old_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - ret = i2c_read(0x53, 0, 1, spd_params, 256); - - i2c_set_bus_num(old_bus); - - dimm_name[0] = '\0'; - - if (ret) { - puts("Cannot read DIMM params\n"); - return 1; - } - - /* - * We need to convert spd data to dimm parameters - * and to DDR3 EMIF and PHY regirsters values. - * For now we just return DIMM type string value. - * Caller may use this value to choose appropriate - * a pre-set DDR3 configuration - */ - - strncpy(dimm_name, (char *)&spd_params[0x80], 18); - dimm_name[18] = '\0'; - - return 0; -} - -struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); -struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); -struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); -struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); - -void ddr3_init(void) -{ - char dimm_name[32]; - - get_dimm_params(dimm_name); - - printf("Detected SO-DIMM [%s]\n", dimm_name); - - if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { - init_pll(&ddr3a_400); - if (cpu_revision() > 0) { - if (cpu_revision() > 1) { - /* PG 2.0 */ - /* Reset DDR3A PHY after PLL enabled */ - ddr3_reset_ddrphy(); - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1600_64A_pg2); - } else { - /* PG 1.1 */ - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1600_64A); - } - - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1600_64); - printf("DRAM: Capacity 8 GiB (includes reported below)\n"); - } else { - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32); - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1600_32); - printf("DRAM: Capacity 4 GiB (includes reported below)\n"); - } - } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { - init_pll(&ddr3a_333); - if (cpu_revision() > 0) { - if (cpu_revision() > 1) { - /* PG 2.0 */ - /* Reset DDR3A PHY after PLL enabled */ - ddr3_reset_ddrphy(); - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1333_64A_pg2); - } else { - /* PG 1.1 */ - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1333_64A); - } - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1333_64); - } else { - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32); - ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1333_32); - } - } else { - printf("Unknown SO-DIMM. Cannot configure DDR3\n"); - while (1) - ; - } - - init_pll(&ddr3b_333); - ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64); - ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); -} diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile new file mode 100644 index 0000000000..58d77dcae5 --- /dev/null +++ b/board/ti/ks2_evm/Makefile @@ -0,0 +1,10 @@ +# +# KS2-EVM: board Makefile +# (C) Copyright 2012-2014 +# Texas Instruments Incorporated, +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += board.o +obj-$(CONFIG_K2HK_EVM) += board_k2hk.o +obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o diff --git a/board/ti/ks2_evm/README_K2HK b/board/ti/ks2_evm/README_K2HK new file mode 100644 index 0000000000..7426b8dc97 --- /dev/null +++ b/board/ti/ks2_evm/README_K2HK @@ -0,0 +1,148 @@ +U-Boot port for Texas Instruments XTCIEVMK2X +============================================ + +Author: Murali Karicheri + +This README has information on the u-boot port for XTCIEVMK2X EVM board. +Documentation for this board can be found at + http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx + +The board is based on Texas Instruments Keystone2 family of SoCs : K2H, K2K. +More details on these SoCs are available at company websites + K2K: http://www.ti.com/product/tci6638k2k + K2H: http://www.ti.com/product/tci6638k2h + +Board configuration: +==================== + +Some of the peripherals that are configured by u-boot are:- + +1. 2GB DDR3 (can support 8GB SO DIMM as well) +2. 512M NAND (over ti emif16 bus) +3. 6MB MSM SRAM (part of the SoC) +4. two 1GBit Ethernet ports (SoC supports upto 4) +5. two UART ports +6. three i2c interfaces +7. three spi interfaces (only 1 interface supported in driver) + +There are seperate PLLs to drive clocks to Tetris ARM and Peripherals. +To bring up SMP Linux on this board, there is a boot monitor +code that will be installed in MSMC SRAM. There is command available +to install this image from u-boot. + +The port related files can be found at following folders + keystone2 SoC related files: arch/arm/cpu/armv7/keystone/ + K2HK evm board files: board/ti/k2hk_evm/ + +board configuration file: include/configs/k2hk_evm.h + +Supported boot modes: + - SPI NOR boot + - AEMIF NAND boot + +Supported image formats:- + - u-boot.bin: for loading and running u-boot.bin through Texas instruments + code composure studio (CCS) + - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot + - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot + +Build instructions: +=================== + +To build u-boot.bin + >make k2hk_evm_config + >make u-boot-spi.gph + +To build u-boot-spi.gph + >make k2hk_evm_config + >make u-boot-spi.gph + +To build u-boot-nand.gph + >make k2hk_evm_config + >make u-boot-nand.gph + +Load and Run U-Boot on K2HK EVM using CCS +========================================= + +Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin +on EVM. See instructions at below link for installing CCS on a Windows PC. +http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started# +Installing_Code_Composer_Studio +Use u-boot.bin from the build folder for loading annd running u-boot binary +on EVM. Follow instructions at +http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup +to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" +and Power ON the EVM. Follow instructions to connect serial port of EVM to +PC and start TeraTerm or Hyper Terminal. + +Start CCS on a Windows machine and Launch Target +configuration as instructed at http://processors.wiki.ti.com/index.php/ +MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS. +The instructions provided in the above link uses a script for +loading the u-boot binary on the target EVM. Instead do the following:- + +1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D + isconnected: Unknown)" at the debug window (This is created once Target + configuration is launched) and select "Connect Target". +2. Once target connect is successful, choose Tools->Load Memory option from the + top level menu. At the Load Memory window, choose the file u-boot.bin + through "Browse" button and click "next >" button. In the next window, enter + Start address as 0xc001000, choose Type-size "32 bits" and click "Finish" + button. +3. Click View -> Registers from the top level menu to view registers window. +4. From Registers, window expand "Core Registers" to view PC. Edit PC value + to be 0xc001000. From the "Run" top level menu, select "Free Run" +5. The U-Boot prompt is shown at the Tera Term/ Hyper terminal console as + below and type any key to stop autoboot as instructed := + +U-Boot 2014.04-rc1-00201-gc215b5a (Mar 21 2014 - 12:47:59) + +I2C: ready +Detected SO-DIMM [SQR-SD3T-2G1333SED] +DRAM: 1.1 GiB +NAND: 512 MiB +Net: K2HK_EMAC +Warning: K2HK_EMAC using MAC address from net device +, K2HK_EMAC1, K2HK_EMAC2, K2HK_EMAC3 +Hit any key to stop autoboot: 0 + +SPI NOR Flash programming instructions +====================================== +U-Boot image can be flashed to first 512KB of the NOR flash using following +instructions:- + +1. Start CCS and run U-boot as described above. +2. Suspend Target. Select Run -> Suspend from top level menu + CortexA15_1 (Free Running)" +3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 + through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM + using CCS", but using address 0x87000000. +4. Free Run the target as desribed earlier (step 4) to get u-boot prompt +5. At the U-Boot console type following to setup u-boot environment variables. + setenv addr_uboot 0x87000000 + setenv filesize + run burn_uboot_spi + Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + to "SPI Little Endian Boot mode" as per instruction at + http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. +6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. + +AEMIF NAND Flash programming instructions +====================================== +U-Boot image can be flashed to first 1024KB of the NAND flash using following +instructions:- + +1. Start CCS and run U-boot as described above. +2. Suspend Target. Select Run -> Suspend from top level menu + CortexA15_1 (Free Running)" +3. Load u-boot-nand.gph binary from build folder on to DDR address 0x87000000 + through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM + using CCS", but using address 0x87000000. +4. Free Run the target as desribed earlier (step 4) to get u-boot prompt +5. At the U-Boot console type following to setup u-boot environment variables. + setenv filesize + run burn_uboot_nand + Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + to "ARM NAND Boot mode" as per instruction at + http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. +6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash. diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c new file mode 100644 index 0000000000..dfe7be60e7 --- /dev/null +++ b/board/ti/ks2_evm/board.c @@ -0,0 +1,229 @@ +/* + * Keystone : Board initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "board.h" +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static struct aemif_config aemif_configs[] = { + { /* CS0 */ + .mode = AEMIF_MODE_NAND, + .wr_setup = 0xf, + .wr_strobe = 0x3f, + .wr_hold = 7, + .rd_setup = 0xf, + .rd_strobe = 0x3f, + .rd_hold = 7, + .turn_around = 3, + .width = AEMIF_WIDTH_8, + }, +}; + +int dram_init(void) +{ + ddr3_init(); + + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_MAX_RAM_BANK_SIZE); + aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs); + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_LINUX_BOOT_PARAM_ADDR; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +int get_eth_env_param(char *env_name) +{ + char *env; + int res = -1; + + env = getenv(env_name); + if (env) + res = simple_strtol(env, NULL, 0); + + return res; +} + +int board_eth_init(bd_t *bis) +{ + int j; + int res; + int port_num; + char link_type_name[32]; + + port_num = get_num_eth_ports(); + + for (j = 0; j < port_num; j++) { + sprintf(link_type_name, "sgmii%d_link_type", j); + res = get_eth_env_param(link_type_name); + if (res >= 0) + eth_priv_cfg[j].sgmii_link_type = res; + + keystone2_emac_initialize(ð_priv_cfg[j]); + } + + return 0; +} +#endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + int lpae; + char *env; + char *endp; + int nbanks; + u64 size[2]; + u64 start[2]; + char name[32]; + int nodeoffset; + u32 ddr3a_size; + int unitrd_fixup = 0; + + env = getenv("mem_lpae"); + lpae = env && simple_strtol(env, NULL, 0); + env = getenv("uinitrd_fixup"); + unitrd_fixup = env && simple_strtol(env, NULL, 0); + + ddr3a_size = 0; + if (lpae) { + env = getenv("ddr3a_size"); + if (env) + ddr3a_size = simple_strtol(env, NULL, 10); + if ((ddr3a_size != 8) && (ddr3a_size != 4)) + ddr3a_size = 0; + } + + nbanks = 1; + start[0] = bd->bi_dram[0].start; + size[0] = bd->bi_dram[0].size; + + /* adjust memory start address for LPAE */ + if (lpae) { + start[0] -= CONFIG_SYS_SDRAM_BASE; + start[0] += CONFIG_SYS_LPAE_SDRAM_BASE; + } + + if ((size[0] == 0x80000000) && (ddr3a_size != 0)) { + size[1] = ((u64)ddr3a_size - 2) << 30; + start[1] = 0x880000000; + nbanks++; + } + + /* reserve memory at start of bank */ + sprintf(name, "mem_reserve_head"); + env = getenv(name); + if (env) { + start[0] += ustrtoul(env, &endp, 0); + size[0] -= ustrtoul(env, &endp, 0); + } + + sprintf(name, "mem_reserve"); + env = getenv(name); + if (env) + size[0] -= ustrtoul(env, &endp, 0); + + fdt_fixup_memory_banks(blob, start, size, nbanks); + + /* Fix up the initrd */ + if (lpae && unitrd_fixup) { + int err; + u32 *prop1, *prop2; + u64 initrd_start, initrd_end; + + nodeoffset = fdt_path_offset(blob, "/chosen"); + if (nodeoffset >= 0) { + prop1 = (u32 *)fdt_getprop(blob, nodeoffset, + "linux,initrd-start", NULL); + prop2 = (u32 *)fdt_getprop(blob, nodeoffset, + "linux,initrd-end", NULL); + if (prop1 && prop2) { + initrd_start = __be32_to_cpu(*prop1); + initrd_start -= CONFIG_SYS_SDRAM_BASE; + initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE; + initrd_start = __cpu_to_be64(initrd_start); + initrd_end = __be32_to_cpu(*prop2); + initrd_end -= CONFIG_SYS_SDRAM_BASE; + initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE; + initrd_end = __cpu_to_be64(initrd_end); + + err = fdt_delprop(blob, nodeoffset, + "linux,initrd-start"); + if (err < 0) + puts("error deleting initrd-start\n"); + + err = fdt_delprop(blob, nodeoffset, + "linux,initrd-end"); + if (err < 0) + puts("error deleting initrd-end\n"); + + err = fdt_setprop(blob, nodeoffset, + "linux,initrd-start", + &initrd_start, + sizeof(initrd_start)); + if (err < 0) + puts("error adding initrd-start\n"); + + err = fdt_setprop(blob, nodeoffset, + "linux,initrd-end", + &initrd_end, + sizeof(initrd_end)); + if (err < 0) + puts("error adding linux,initrd-end\n"); + } + } + } +} + +void ft_board_setup_ex(void *blob, bd_t *bd) +{ + int lpae; + u64 size; + char *env; + u64 *reserve_start; + + env = getenv("mem_lpae"); + lpae = env && simple_strtol(env, NULL, 0); + + if (lpae) { + /* + * the initrd and other reserved memory areas are + * embedded in in the DTB itslef. fix up these addresses + * to 36 bit format + */ + reserve_start = (u64 *)((char *)blob + + fdt_off_mem_rsvmap(blob)); + while (1) { + *reserve_start = __cpu_to_be64(*reserve_start); + size = __cpu_to_be64(*(reserve_start + 1)); + if (size) { + *reserve_start -= CONFIG_SYS_SDRAM_BASE; + *reserve_start += + CONFIG_SYS_LPAE_SDRAM_BASE; + *reserve_start = + __cpu_to_be64(*reserve_start); + } else { + break; + } + reserve_start += 2; + } + } +} +#endif diff --git a/board/ti/ks2_evm/board.h b/board/ti/ks2_evm/board.h new file mode 100644 index 0000000000..d91ef73612 --- /dev/null +++ b/board/ti/ks2_evm/board.h @@ -0,0 +1,19 @@ +/* + * K2HK EVM : Board common header + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _KS2_BOARD +#define _KS2_BOARD + +#include + +extern struct eth_priv_t eth_priv_cfg[]; + +int get_num_eth_ports(void); + +#endif diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c new file mode 100644 index 0000000000..a369d6bd63 --- /dev/null +++ b/board/ti/ks2_evm/board_k2hk.c @@ -0,0 +1,81 @@ +/* + * K2HK EVM : Board initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int external_clk[ext_clk_count] = { + [sys_clk] = 122880000, + [alt_core_clk] = 125000000, + [pa_clk] = 122880000, + [tetris_clk] = 125000000, + [ddr3a_clk] = 100000000, + [ddr3b_clk] = 100000000, + [mcm_clk] = 312500000, + [pcie_clk] = 100000000, + [sgmii_srio_clk] = 156250000, + [xgmii_clk] = 156250000, + [usb_clk] = 100000000, + [rp1_clk] = 123456789 +}; + +static struct pll_init_data pll_config[] = { + CORE_PLL_1228, + PASS_PLL_983, + TETRIS_PLL_1200, +}; + +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +struct eth_priv_t eth_priv_cfg[] = { + { + .int_name = "K2HK_EMAC", + .rx_flow = 22, + .phy_addr = 0, + .slave_port = 1, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2HK_EMAC1", + .rx_flow = 23, + .phy_addr = 1, + .slave_port = 2, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2HK_EMAC2", + .rx_flow = 24, + .phy_addr = 2, + .slave_port = 3, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, + { + .int_name = "K2HK_EMAC3", + .rx_flow = 25, + .phy_addr = 3, + .slave_port = 4, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, +}; + +int get_num_eth_ports(void) +{ + return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); +} +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + init_plls(ARRAY_SIZE(pll_config), pll_config); + return 0; +} +#endif diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c new file mode 100644 index 0000000000..31e9c31ea2 --- /dev/null +++ b/board/ti/ks2_evm/ddr3_k2hk.c @@ -0,0 +1,349 @@ +/* + * Keystone2: DDR3 initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/************************* *****************************/ +static struct ddr3_phy_config ddr3phy_1600_64A = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), + .dcr_val = ((1 << 10) | (1 << 27)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x12868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1600_64 = { + .sdcfg = 0x6200CE6aul, + .sdtim1 = 0x16709C55ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x435DFF54ul, + .sdtim4 = 0x553F0CFFul, + .zqcfg = 0xF0073200ul, + .sdrfc = 0x00001869ul, +}; + +static struct ddr3_phy_config ddr3phy_1600_32 = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), + .dcr_val = ((1 << 10) | (1 << 27)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x12868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1600_32 = { + .sdcfg = 0x6200DE6aul, + .sdtim1 = 0x16709C55ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x435DFF54ul, + .sdtim4 = 0x553F0CFFul, + .zqcfg = 0x70073200ul, + .sdrfc = 0x00001869ul, +}; + +/************************* *****************************/ +static struct ddr3_phy_config ddr3phy_1333_64A = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | + NOSRA_MASK | UDIMM_MASK), + .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x12857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1333_64 = { + .sdcfg = 0x62008C62ul, + .sdtim1 = 0x125C8044ul, + .sdtim2 = 0x00001D29ul, + .sdtim3 = 0x32CDFF43ul, + .sdtim4 = 0x543F0ADFul, + .zqcfg = 0xF0073200ul, + .sdrfc = 0x00001457ul, +}; + +static struct ddr3_phy_config ddr3phy_1333_32 = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | + NOSRA_MASK | UDIMM_MASK), + .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x12857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1333_32 = { + .sdcfg = 0x62009C62ul, + .sdtim1 = 0x125C8044ul, + .sdtim2 = 0x00001D29ul, + .sdtim3 = 0x32CDFF43ul, + .sdtim4 = 0x543F0ADFul, + .zqcfg = 0xf0073200ul, + .sdrfc = 0x00001457ul, +}; + +/************************* *****************************/ +static struct ddr3_phy_config ddr3phy_1333_64 = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), + .dcr_val = ((1 << 10) | (1 << 27)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x12857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; +/******************************************************/ + +/* DDR PHY Configs Updated for PG 2.0 + * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */ +static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x32868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0001005Dul, + .zq1cr1 = 0x0001005Bul, + .zq2cr1 = 0x0001005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x32857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0001005Dul, + .zq1cr1 = 0x0001005Bul, + .zq2cr1 = 0x0001005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +int get_dimm_params(char *dimm_name) +{ + u8 spd_params[256]; + int ret; + int old_bus; + + i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); + + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + ret = i2c_read(0x53, 0, 1, spd_params, 256); + + i2c_set_bus_num(old_bus); + + dimm_name[0] = '\0'; + + if (ret) { + puts("Cannot read DIMM params\n"); + return 1; + } + + /* + * We need to convert spd data to dimm parameters + * and to DDR3 EMIF and PHY regirsters values. + * For now we just return DIMM type string value. + * Caller may use this value to choose appropriate + * a pre-set DDR3 configuration + */ + + strncpy(dimm_name, (char *)&spd_params[0x80], 18); + dimm_name[18] = '\0'; + + return 0; +} + +struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); +struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); +struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); +struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); + +void ddr3_init(void) +{ + char dimm_name[32]; + + get_dimm_params(dimm_name); + + printf("Detected SO-DIMM [%s]\n", dimm_name); + + if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { + init_pll(&ddr3a_400); + if (cpu_revision() > 0) { + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1600_64A_pg2); + } else { + /* PG 1.1 */ + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1600_64A); + } + + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1600_64); + printf("DRAM: Capacity 8 GiB (includes reported below)\n"); + } else { + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1600_32); + printf("DRAM: Capacity 4 GiB (includes reported below)\n"); + } + } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { + init_pll(&ddr3a_333); + if (cpu_revision() > 0) { + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1333_64A_pg2); + } else { + /* PG 1.1 */ + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1333_64A); + } + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1333_64); + } else { + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1333_32); + } + } else { + printf("Unknown SO-DIMM. Cannot configure DDR3\n"); + while (1) + ; + } + + init_pll(&ddr3b_333); + ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64); + ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); +} diff --git a/boards.cfg b/boards.cfg index 6f8d168cf1..f7fbd54890 100644 --- a/boards.cfg +++ b/boards.cfg @@ -300,7 +300,7 @@ Active arm armv7 exynos samsung trats Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak Active arm armv7 highbank - highbank highbank - Rob Herring -Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov +Active arm armv7 keystone ti ks2_evm k2hk_evm - Vitaly Andrianov Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg - Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index bacf3bca9d..f727882d0b 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -258,6 +258,7 @@ #define CONFIG_OF_BOARD_SETUP #define CONFIG_SYS_BARGSIZE 1024 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) +#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) #define CONFIG_SUPPORT_RAW_INITRD -- cgit From 8dfc15f56c2b39fb5d542cf67857f5ad36575234 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 9 Jul 2014 23:44:47 +0300 Subject: ARM: keystone: clock: move K2HK SoC dependent code in separate file This patch in general spit SoC type clock dependent code and general clock code. Before adding keystone II Edison k2e SoC which has slightly different dpll set, move k2hk dependent clock code to separate clock-k2hk.c file. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/Makefile | 1 + arch/arm/cpu/armv7/keystone/clock-k2hk.c | 113 ++++++++++++++++++ arch/arm/cpu/armv7/keystone/clock.c | 148 ++++-------------------- arch/arm/include/asm/arch-keystone/clock-k2hk.h | 21 ---- arch/arm/include/asm/arch-keystone/clock.h | 28 +++++ 5 files changed, 166 insertions(+), 145 deletions(-) create mode 100644 arch/arm/cpu/armv7/keystone/clock-k2hk.c diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile index 64e42a6e23..74c516013a 100644 --- a/arch/arm/cpu/armv7/keystone/Makefile +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -8,6 +8,7 @@ obj-y += init.o obj-y += psc.o obj-y += clock.o +obj-$(CONFIG_SOC_K2HK) += clock-k2hk.o obj-y += cmd_clock.o obj-y += cmd_mon.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o diff --git a/arch/arm/cpu/armv7/keystone/clock-k2hk.c b/arch/arm/cpu/armv7/keystone/clock-k2hk.c new file mode 100644 index 0000000000..96a9f72886 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/clock-k2hk.c @@ -0,0 +1,113 @@ +/* + * Keystone2: get clk rate for K2HK + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +const struct keystone_pll_regs keystone_pll_regs[] = { + [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, + [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, + [TETRIS_PLL] = {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1}, + [DDR3A_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, + [DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1}, +}; + +/** + * pll_freq_get - get pll frequency + * Fout = Fref * NF(mult) / NR(prediv) / OD + * @pll: pll identifier + */ +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, output_div = 2; + unsigned long ret; + u32 tmp, reg; + + if (pll == CORE_PLL) { + ret = external_clk[sys_clk]; + if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { + /* PLL mode */ + tmp = __raw_readl(KS2_MAINPLLCTL0); + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | + (pllctl_reg_read(pll, mult) & + PLLM_MULT_LO_MASK)) + 1; + output_div = ((pllctl_reg_read(pll, secctl) >> + PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; + + ret = ret / prediv / output_div * mult; + } + } else { + switch (pll) { + case PASS_PLL: + ret = external_clk[pa_clk]; + reg = KS2_PASSPLLCTL0; + break; + case TETRIS_PLL: + ret = external_clk[tetris_clk]; + reg = KS2_ARMPLLCTL0; + break; + case DDR3A_PLL: + ret = external_clk[ddr3a_clk]; + reg = KS2_DDR3APLLCTL0; + break; + case DDR3B_PLL: + ret = external_clk[ddr3b_clk]; + reg = KS2_DDR3BPLLCTL0; + break; + default: + return 0; + } + + tmp = __raw_readl(reg); + + if (!(tmp & PLLCTL_BYPASS)) { + /* Bypass disabled */ + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + output_div = ((tmp >> PLL_CLKOD_SHIFT) & + PLL_CLKOD_MASK) + 1; + ret = ((ret / prediv) * mult) / output_div; + } + } + + return ret; +} + +unsigned long clk_get_rate(unsigned int clk) +{ + switch (clk) { + case core_pll_clk: return pll_freq_get(CORE_PLL); + case pass_pll_clk: return pll_freq_get(PASS_PLL); + case tetris_pll_clk: return pll_freq_get(TETRIS_PLL); + case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL); + case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL); + case sys_clk0_1_clk: + case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); + case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); + case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); + case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); + case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; + case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; + case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; + case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; + case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; + case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; + case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; + case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; + case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; + case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; + case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; + default: + break; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index f905fdcf0d..42b664b576 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -8,9 +8,6 @@ */ #include -#include -#include -#include #include #include @@ -24,106 +21,6 @@ static void wait_for_completion(const struct pll_init_data *data) } } -struct pll_regs { - u32 reg0, reg1; -}; - -static const struct pll_regs pll_regs[] = { - [CORE_PLL] = { KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, - [PASS_PLL] = { KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, - [TETRIS_PLL] = { KS2_ARMPLLCTL0, KS2_ARMPLLCTL1}, - [DDR3A_PLL] = { KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, - [DDR3B_PLL] = { KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1}, -}; - -/* Fout = Fref * NF(mult) / NR(prediv) / OD */ -static unsigned long pll_freq_get(int pll) -{ - unsigned long mult = 1, prediv = 1, output_div = 2; - unsigned long ret; - u32 tmp, reg; - - if (pll == CORE_PLL) { - ret = external_clk[sys_clk]; - if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { - /* PLL mode */ - tmp = __raw_readl(KS2_MAINPLLCTL0); - prediv = (tmp & PLL_DIV_MASK) + 1; - mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | - (pllctl_reg_read(pll, mult) & - PLLM_MULT_LO_MASK)) + 1; - output_div = ((pllctl_reg_read(pll, secctl) >> - PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; - - ret = ret / prediv / output_div * mult; - } - } else { - switch (pll) { - case PASS_PLL: - ret = external_clk[pa_clk]; - reg = KS2_PASSPLLCTL0; - break; - case TETRIS_PLL: - ret = external_clk[tetris_clk]; - reg = KS2_ARMPLLCTL0; - break; - case DDR3A_PLL: - ret = external_clk[ddr3a_clk]; - reg = KS2_DDR3APLLCTL0; - break; - case DDR3B_PLL: - ret = external_clk[ddr3b_clk]; - reg = KS2_DDR3BPLLCTL0; - break; - default: - return 0; - } - - tmp = __raw_readl(reg); - - if (!(tmp & PLLCTL_BYPASS)) { - /* Bypass disabled */ - prediv = (tmp & PLL_DIV_MASK) + 1; - mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; - output_div = ((tmp >> PLL_CLKOD_SHIFT) & - PLL_CLKOD_MASK) + 1; - ret = ((ret / prediv) * mult) / output_div; - } - } - - return ret; -} - -unsigned long clk_get_rate(unsigned int clk) -{ - switch (clk) { - case core_pll_clk: return pll_freq_get(CORE_PLL); - case pass_pll_clk: return pll_freq_get(PASS_PLL); - case tetris_pll_clk: return pll_freq_get(TETRIS_PLL); - case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL); - case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL); - case sys_clk0_1_clk: - case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); - case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); - case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); - case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); - case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; - case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; - case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; - case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; - case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; - case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; - case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; - case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; - case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; - case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; - case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; - default: - break; - } - return 0; -} - void init_pll(const struct pll_init_data *data) { u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj; @@ -139,7 +36,7 @@ void init_pll(const struct pll_init_data *data) tmp = pllctl_reg_read(data->pll, secctl); if (tmp & (PLLCTL_BYPASS)) { - setbits_le32(pll_regs[data->pll].reg1, + setbits_le32(keystone_pll_regs[data->pll].reg1, BIT(MAIN_ENSAT_OFFSET)); pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN | @@ -159,21 +56,24 @@ void init_pll(const struct pll_init_data *data) pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK); - clrsetbits_le32(pll_regs[data->pll].reg0, PLLM_MULT_HI_SMASK, - (pllm << 6)); + clrsetbits_le32(keystone_pll_regs[data->pll].reg0, + PLLM_MULT_HI_SMASK, (pllm << 6)); /* Set the BWADJ (12 bit field) */ tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */ - clrsetbits_le32(pll_regs[data->pll].reg0, PLL_BWADJ_LO_SMASK, + clrsetbits_le32(keystone_pll_regs[data->pll].reg0, + PLL_BWADJ_LO_SMASK, (tmp_ctl << PLL_BWADJ_LO_SHIFT)); - clrsetbits_le32(pll_regs[data->pll].reg1, PLL_BWADJ_HI_MASK, + clrsetbits_le32(keystone_pll_regs[data->pll].reg1, + PLL_BWADJ_HI_MASK, (tmp_ctl >> 8)); /* * Set the pll divider (6 bit field) * * PLLD[5:0] is located in MAINPLLCTL0 */ - clrsetbits_le32(pll_regs[data->pll].reg0, PLL_DIV_MASK, plld); + clrsetbits_le32(keystone_pll_regs[data->pll].reg0, + PLL_DIV_MASK, plld); /* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */ pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK, @@ -209,14 +109,14 @@ void init_pll(const struct pll_init_data *data) } else if (data->pll == TETRIS_PLL) { bwadj = pllm >> 1; /* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */ - setbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + setbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS); /* * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass) * only applicable for Kepler */ clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); /* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */ - setbits_le32(pll_regs[data->pll].reg1 , + setbits_le32(keystone_pll_regs[data->pll].reg1 , PLL_PLLRST | PLLCTL_ENSAT); /* @@ -229,13 +129,13 @@ void init_pll(const struct pll_init_data *data) (pllm << 6) | (plld & PLL_DIV_MASK) | (pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS; - __raw_writel(tmp, pll_regs[data->pll].reg0); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg0); /* Set BWADJ[11:8] bits */ - tmp = __raw_readl(pll_regs[data->pll].reg1); + tmp = __raw_readl(keystone_pll_regs[data->pll].reg1); tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK); - __raw_writel(tmp, pll_regs[data->pll].reg1); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg1); /* * 5 Wait for at least 5 us based on the reference * clock (PLL reset time) @@ -243,26 +143,26 @@ void init_pll(const struct pll_init_data *data) sdelay(21000); /* Wait for a minimum of 7 us*/ /* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */ - clrbits_le32(pll_regs[data->pll].reg1, PLL_PLLRST); + clrbits_le32(keystone_pll_regs[data->pll].reg1, PLL_PLLRST); /* * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1) * (PLL lock time) */ sdelay(105000); /* 8 disable bypass */ - clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS); /* * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass) * only applicable for Kepler */ setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); } else { - setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT); + setbits_le32(keystone_pll_regs[data->pll].reg1, PLLCTL_ENSAT); /* * process keeps state of Bypass bit while programming * all other DDR PLL settings */ - tmp = __raw_readl(pll_regs[data->pll].reg0); + tmp = __raw_readl(keystone_pll_regs[data->pll].reg0); tmp &= PLLCTL_BYPASS; /* clear everything except Bypass */ /* @@ -274,10 +174,10 @@ void init_pll(const struct pll_init_data *data) (pllm << PLL_MULT_SHIFT) | (plld & PLL_DIV_MASK) | (pllod << PLL_CLKOD_SHIFT); - __raw_writel(tmp, pll_regs[data->pll].reg0); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg0); /* Set BWADJ[11:8] bits */ - tmp = __raw_readl(pll_regs[data->pll].reg1); + tmp = __raw_readl(keystone_pll_regs[data->pll].reg1); tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK); @@ -285,20 +185,20 @@ void init_pll(const struct pll_init_data *data) if (data->pll == PASS_PLL) tmp |= PLLCTL_PAPLL; - __raw_writel(tmp, pll_regs[data->pll].reg1); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg1); /* Reset bit: bit 14 for both DDR3 & PASS PLL */ tmp = PLL_PLLRST; /* Set RESET bit = 1 */ - setbits_le32(pll_regs[data->pll].reg1, tmp); + setbits_le32(keystone_pll_regs[data->pll].reg1, tmp); /* Wait for a minimum of 7 us*/ sdelay(21000); /* Clear RESET bit */ - clrbits_le32(pll_regs[data->pll].reg1, tmp); + clrbits_le32(keystone_pll_regs[data->pll].reg1, tmp); sdelay(105000); /* clear BYPASS (Enable PLL Mode) */ - clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS); sdelay(21000); /* Wait for a minimum of 7 us*/ } diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h index ed1225c298..784a0be567 100644 --- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h @@ -10,10 +10,6 @@ #ifndef __ASM_ARCH_CLOCK_K2HK_H #define __ASM_ARCH_CLOCK_K2HK_H -#include - -#ifndef __ASSEMBLY__ - enum ext_clk_e { sys_clk, alt_core_clk, @@ -66,15 +62,6 @@ enum pll_type_e { DDR3A_PLL, DDR3B_PLL, }; -#define MAIN_PLL CORE_PLL - -/* PLL configuration data */ -struct pll_init_data { - int pll; - int pll_m; /* PLL Multiplier */ - int pll_d; /* PLL divider */ - int pll_od; /* PLL output divider */ -}; #define CORE_PLL_799 {CORE_PLL, 13, 1, 2} #define CORE_PLL_983 {CORE_PLL, 16, 1, 2} @@ -98,12 +85,4 @@ struct pll_init_data { #define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2} #define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6} -void init_plls(int num_pll, struct pll_init_data *config); -void init_pll(const struct pll_init_data *data); -unsigned long clk_get_rate(unsigned int clk); -unsigned long clk_round_rate(unsigned int clk, unsigned long hz); -int clk_set_rate(unsigned int clk, unsigned long hz); - -#endif - #endif diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h index 324501b75a..c7da3520c4 100644 --- a/arch/arm/include/asm/arch-keystone/clock.h +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -10,8 +10,36 @@ #ifndef __ASM_ARCH_CLOCK_H #define __ASM_ARCH_CLOCK_H +#ifndef __ASSEMBLY__ + #ifdef CONFIG_SOC_K2HK #include #endif +#define MAIN_PLL CORE_PLL + +#include + +struct keystone_pll_regs { + u32 reg0; + u32 reg1; +}; + +/* PLL configuration data */ +struct pll_init_data { + int pll; + int pll_m; /* PLL Multiplier */ + int pll_d; /* PLL divider */ + int pll_od; /* PLL output divider */ +}; + +extern const struct keystone_pll_regs keystone_pll_regs[]; + +void init_plls(int num_pll, struct pll_init_data *config); +void init_pll(const struct pll_init_data *data); +unsigned long clk_get_rate(unsigned int clk); +unsigned long clk_round_rate(unsigned int clk, unsigned long hz); +int clk_set_rate(unsigned int clk, unsigned long hz); + +#endif #endif -- cgit From 2221cd12cddeecd88ae2d8d6ec4e5ca390b14dc7 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 9 Jul 2014 23:44:48 +0300 Subject: configs: k2hk_evm: config: add common EVM configuration header This patch adds a common config header file for all the Keystone II EVM platforms. It combines a lot of general definitions in one file. The common header included in the EVM should be specific configuration header. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- include/configs/k2hk_evm.h | 258 +++--------------------------------------- include/configs/ks2_evm.h | 275 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 289 insertions(+), 244 deletions(-) create mode 100644 include/configs/ks2_evm.h diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index f727882d0b..8aa616da0e 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -14,257 +14,27 @@ #define CONFIG_SOC_K2HK #define CONFIG_K2HK_EVM -/* U-Boot Build Configuration */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_THUMB_BUILD - -/* SoC Configuration */ -#define CONFIG_ARMV7 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_ARCH_TIMER -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_TEXT_BASE 0x0c001000 -#define CONFIG_SPL_TARGET "u-boot-spi.gph" -#define CONFIG_SYS_DCACHE_OFF - -/* Memory Configuration */ -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 -#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ - GENERATED_GBL_DATA_SIZE) - -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c200000 -#define CONFIG_SPL_PAD_TO 65536 -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) -#define CONFIG_SPL_STACK_SIZE (8 * 1024) -#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ - CONFIG_SYS_SPL_MALLOC_SIZE + \ - CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SPL_FRAMEWORK - -/* UART Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_MEM32 -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* SPI Configuration */ -#define CONFIG_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI0 -#define CONFIG_SYS_SPI_BASE KS2_SPI_BASE -#define CONFIG_SYS_SPI0_NUM_CS 4 -#define CONFIG_SYS_SPI1 -#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE -#define CONFIG_SYS_SPI1_NUM_CS 4 -#define CONFIG_SYS_SPI2 -#define CONFIG_SYS_SPI2_NUM_CS 4 -#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE -#define CONFIG_CMD_SPI -#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2HK EVM # " -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ -#define I2C_BUS_MAX 3 +#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" -/* EEPROM definitions */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0" +#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0" +#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0" +#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0" +#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0" -/* Network Configuration */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 32 -#define CONFIG_NET_MULTI -#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 -#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 -#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 -#define CONFIG_SYS_SGMII_RATESCALE 2 +#include -/* AEMIF */ -#define CONFIG_TI_AEMIF -#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c200000 /* NAND Configuration */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_KEYSTONE_RBL_NAND -#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_MASK_CLE 0x4000 -#define CONFIG_SYS_NAND_MASK_ALE 0x2000 - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x100000 -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_RBTREE -#define CONFIG_LZO -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ - "1024k(bootloader)ro,512k(params)ro," \ - "-(ubifs)" -/* U-Boot command configuration */ -#include -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_SF -#define CONFIG_CMD_EEPROM - -/* U-Boot general configuration */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_PROMPT "K2HK EVM # " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE 2048 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "boot=ramfs\0" \ - "tftp_root=/\0" \ - "nfs_root=/export\0" \ - "mem_lpae=1\0" \ - "mem_reserve=512M\0" \ - "addr_fdt=0x87000000\0" \ - "addr_kern=0x88000000\0" \ - "addr_mon=0x0c5f0000\0" \ - "addr_uboot=0x87000000\0" \ - "addr_fs=0x82000000\0" \ - "addr_ubi=0x82000000\0" \ - "fdt_high=0xffffffff\0" \ - "name_fdt=uImage-k2hk-evm.dtb\0" \ - "name_fs=arago-console-image.cpio.gz\0" \ - "name_kern=uImage-keystone-evm.bin\0" \ - "name_mon=skern-keystone-evm.bin\0" \ - "name_uboot=u-boot-spi-keystone-evm.gph\0" \ - "name_ubi=keystone-evm-ubifs.ubi\0" \ - "run_mon=mon_install ${addr_mon}\0" \ - "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ - "init_net=run args_all args_net\0" \ - "init_ubi=run args_all args_ubi; " \ - "ubi part ubifs; ubifsmount boot\0" \ - "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ - "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ - "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ - "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ - "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \ - "sf write ${addr_uboot} 0 ${filesize}\0" \ - "burn_uboot_nand=nand erase 0 0x100000; " \ - "nand write ${addr_uboot} 0 ${filesize}\0" \ - "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ - "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ - "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ - "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ - "${nfs_options} ip=dhcp\0" \ - "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ - "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ - "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ - "burn_ubi=nand erase.part ubifs; " \ - "nand write ${addr_ubi} ubifs ${filesize}\0" \ - "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ - "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \ - "rdinit=/sbin/init rw root=/dev/ram0 " \ - "initrd=0x802000000,9M\0" \ - "no_post=1\0" \ - "mtdparts=mtdparts=davinci_nand.0:" \ - "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0" -#define CONFIG_BOOTCOMMAND \ - "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ - "get_kern_${boot} run_mon run_kern" -#define CONFIG_BOOTARGS \ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_SYS_BARGSIZE 1024 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) -#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) - -#define CONFIG_SUPPORT_RAW_INITRD - -/* we may include files below only after all above definitions */ -#include -#include -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6) +/* Network */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h new file mode 100644 index 0000000000..29f0b9b621 --- /dev/null +++ b/include/configs/ks2_evm.h @@ -0,0 +1,275 @@ +/* + * Common configuration header file for all Keystone II EVM platforms + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_KS2_EVM_H +#define __CONFIG_KS2_EVM_H + +#define CONFIG_SOC_KEYSTONE + +/* U-Boot Build Configuration */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ +#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SYS_THUMB_BUILD + +/* SoC Configuration */ +#define CONFIG_ARMV7 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TEXT_BASE 0x0c001000 +#define CONFIG_SPL_TARGET "u-boot-spi.gph" +#define CONFIG_SYS_DCACHE_OFF + +/* Memory Configuration */ +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 +#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ +#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ + GENERATED_GBL_DATA_SIZE) + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_PAD_TO 65536 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) +#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ + CONFIG_SPL_MAX_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) +#define CONFIG_SPL_STACK_SIZE (8 * 1024) +#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ + CONFIG_SYS_SPL_MALLOC_SIZE + \ + CONFIG_SPL_STACK_SIZE - 4) +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SPL_FRAMEWORK + +/* UART Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_MEM32 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE +#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* SPI Configuration */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_CMD_SPI +#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_SYS_SPI0 +#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE +#define CONFIG_SYS_SPI0_NUM_CS 4 +#define CONFIG_SYS_SPI1 +#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE +#define CONFIG_SYS_SPI1_NUM_CS 4 +#define CONFIG_SYS_SPI2 +#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE +#define CONFIG_SYS_SPI2_NUM_CS 4 + +/* Network Configuration */ +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 32 +#define CONFIG_NET_MULTI +#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 +#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 +#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 +#define CONFIG_SYS_SGMII_RATESCALE 2 + +/* AEMIF */ +#define CONFIG_TI_AEMIF +#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE + +/* I2C Configuration */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ +#define I2C_BUS_MAX 3 + +/* EEPROM definitions */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_ENV_EEPROM_IS_ON_I2C + +/* NAND Configuration */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_KEYSTONE_RBL_NAND +#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET +#define CONFIG_SYS_NAND_MASK_CLE 0x4000 +#define CONFIG_SYS_NAND_MASK_ALE 0x2000 +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST + +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" +#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro," \ + "-(ubifs)" + +/* U-Boot command configuration */ +#include +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_SF +#define CONFIG_CMD_EEPROM + +/* U-Boot general configuration */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE 2048 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_TIMESTAMP + +/* EDMA3 */ +#define CONFIG_TI_EDMA3 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "boot=ramfs\0" \ + "tftp_root=/\0" \ + "nfs_root=/export\0" \ + "mem_lpae=1\0" \ + "mem_reserve=512M\0" \ + "addr_fdt=0x87000000\0" \ + "addr_kern=0x88000000\0" \ + KS2_ADDR_MON \ + "addr_uboot=0x87000000\0" \ + "addr_fs=0x82000000\0" \ + "addr_ubi=0x82000000\0" \ + "addr_secdb_key=0xc000000\0" \ + "fdt_high=0xffffffff\0" \ + KS2_FDT_NAME \ + "name_fs=arago-console-image.cpio.gz\0" \ + "name_kern=uImage\0" \ + KS2_NAME_MON \ + NAME_UBOOT \ + NAME_UBI \ + "run_mon=mon_install ${addr_mon}\0" \ + "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ + "init_net=run args_all args_net\0" \ + "init_ubi=run args_all args_ubi; " \ + "ubi part ubifs; ubifsmount boot;" \ + "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ + "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ + "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ + "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ + "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ + "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \ + "sf write ${addr_uboot} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${addr_uboot} 0 ${filesize}\0" \ + "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ + KS2_ARGS_UBI \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ + "${nfs_options} ip=dhcp\0" \ + "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ + "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ + "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ + "burn_ubi=nand erase.part ubifs; " \ + "nand write ${addr_ubi} ubifs ${filesize}\0" \ + "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ + "args_ramfs=setenv bootargs ${bootargs} " \ + "rdinit=/sbin/init rw root=/dev/ram0 " \ + "initrd=0x802000000,9M\0" \ + "no_post=1\0" \ + "mtdparts=mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0" + +#define CONFIG_BOOTCOMMAND \ + "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ + "get_kern_${boot} run_mon run_kern" + +#define CONFIG_BOOTARGS \ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_SYS_BARGSIZE 1024 +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) +#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) + +#define CONFIG_SUPPORT_RAW_INITRD + +/* we may include files below only after all above definitions */ +#include +#include +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6) + +/* Maximum memory size for relocated U-boot at the end of the DDR3 memory + which is NOT applicable for DDR ECC test */ +#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */ + +#endif /* __CONFIG_KS2_EVM_H */ -- cgit From b1babef856f936278d24bd0bf84f9cf702df2392 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 9 Jul 2014 23:44:49 +0300 Subject: keystone: ddr3: move K2HK DDR3 configuration to a common file It's convenient to hold configurations for DDR3 PHY and EMIF in separate common place. This patch moves K2HK DDR3 PHY and EMIF configuration data with different rates and memory size to a common ddr3_cfg.c file. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- board/ti/ks2_evm/Makefile | 1 + board/ti/ks2_evm/ddr3_cfg.c | 130 ++++++++++++++++++ board/ti/ks2_evm/ddr3_cfg.h | 21 +++ board/ti/ks2_evm/ddr3_k2hk.c | 305 +++---------------------------------------- 4 files changed, 172 insertions(+), 285 deletions(-) create mode 100644 board/ti/ks2_evm/ddr3_cfg.c create mode 100644 board/ti/ks2_evm/ddr3_cfg.h diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile index 58d77dcae5..774a7d526c 100644 --- a/board/ti/ks2_evm/Makefile +++ b/board/ti/ks2_evm/Makefile @@ -6,5 +6,6 @@ # obj-y += board.o +obj-y += ddr3_cfg.o obj-$(CONFIG_K2HK_EVM) += board_k2hk.o obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c new file mode 100644 index 0000000000..6e55af924f --- /dev/null +++ b/board/ti/ks2_evm/ddr3_cfg.c @@ -0,0 +1,130 @@ +/* + * Keystone2: DDR3 configuration + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* DDR3 PHY configuration data with 1600M rate, 8GB size */ +struct ddr3_phy_config ddr3phy_1600_8g = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x32868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +/* DDR3 EMIF configuration data with 1600M rate, 8GB size */ +struct ddr3_emif_config ddr3_1600_8g = { + .sdcfg = 0x6200CE6Aul, + .sdtim1 = 0x16709C55ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x435DFF54ul, + .sdtim4 = 0x553F0CFFul, + .zqcfg = 0xF0073200ul, + .sdrfc = 0x00001869ul, +}; + +#ifdef CONFIG_K2HK_EVM +/* DDR3 PHY configuration data with 1333M rate, and 2GB size */ +struct ddr3_phy_config ddr3phy_1333_2g = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x32857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */ +struct ddr3_emif_config ddr3_1333_2g = { + .sdcfg = 0x62008C62ul, + .sdtim1 = 0x125C8044ul, + .sdtim2 = 0x00001D29ul, + .sdtim3 = 0x32CDFF43ul, + .sdtim4 = 0x543F0ADFul, + .zqcfg = 0x70073200ul, + .sdrfc = 0x00001457ul, +}; +#endif + +int ddr3_get_dimm_params(char *dimm_name) +{ + int ret; + int old_bus; + u8 spd_params[256]; + + i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); + + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + ret = i2c_read(0x53, 0, 1, spd_params, 256); + + i2c_set_bus_num(old_bus); + + dimm_name[0] = '\0'; + + if (ret) { + puts("Cannot read DIMM params\n"); + return 1; + } + + /* + * We need to convert spd data to dimm parameters + * and to DDR3 EMIF and PHY regirsters values. + * For now we just return DIMM type string value. + * Caller may use this value to choose appropriate + * a pre-set DDR3 configuration + */ + + strncpy(dimm_name, (char *)&spd_params[0x80], 18); + dimm_name[18] = '\0'; + + return 0; +} diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h new file mode 100644 index 0000000000..d14bac3640 --- /dev/null +++ b/board/ti/ks2_evm/ddr3_cfg.h @@ -0,0 +1,21 @@ +/* + * Keystone2: DDR3 configuration + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR3_CFG_H +#define __DDR3_CFG_H + +extern struct ddr3_phy_config ddr3phy_1600_8g; +extern struct ddr3_emif_config ddr3_1600_8g; + +extern struct ddr3_phy_config ddr3phy_1333_2g; +extern struct ddr3_emif_config ddr3_1333_2g; + +int ddr3_get_dimm_params(char *dimm_name); + +#endif /* __DDR3_CFG_H */ diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c index 31e9c31ea2..21a5a0a252 100644 --- a/board/ti/ks2_evm/ddr3_k2hk.c +++ b/board/ti/ks2_evm/ddr3_k2hk.c @@ -8,287 +8,18 @@ */ #include +#include "ddr3_cfg.h" #include #include -#include -#include - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1600_64A = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x12868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1600_64 = { - .sdcfg = 0x6200CE6aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001869ul, -}; - -static struct ddr3_phy_config ddr3phy_1600_32 = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x12868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1600_32 = { - .sdcfg = 0x6200DE6aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0x70073200ul, - .sdrfc = 0x00001869ul, -}; - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1333_64A = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | - NOSRA_MASK | UDIMM_MASK), - .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1333_64 = { - .sdcfg = 0x62008C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001457ul, -}; - -static struct ddr3_phy_config ddr3phy_1333_32 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | - NOSRA_MASK | UDIMM_MASK), - .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1333_32 = { - .sdcfg = 0x62009C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0xf0073200ul, - .sdrfc = 0x00001457ul, -}; - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1333_64 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; -/******************************************************/ - -/* DDR PHY Configs Updated for PG 2.0 - * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */ -static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x32868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0001005Dul, - .zq1cr1 = 0x0001005Bul, - .zq2cr1 = 0x0001005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), - .dcr_val = ((1 << 10)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x32857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0001005Dul, - .zq1cr1 = 0x0001005Bul, - .zq2cr1 = 0x0001005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -int get_dimm_params(char *dimm_name) -{ - u8 spd_params[256]; - int ret; - int old_bus; - - i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); - - old_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - ret = i2c_read(0x53, 0, 1, spd_params, 256); - - i2c_set_bus_num(old_bus); - - dimm_name[0] = '\0'; - - if (ret) { - puts("Cannot read DIMM params\n"); - return 1; - } - - /* - * We need to convert spd data to dimm parameters - * and to DDR3 EMIF and PHY regirsters values. - * For now we just return DIMM type string value. - * Caller may use this value to choose appropriate - * a pre-set DDR3 configuration - */ - - strncpy(dimm_name, (char *)&spd_params[0x80], 18); - dimm_name[18] = '\0'; - - return 0; -} struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); -struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); -struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); void ddr3_init(void) { char dimm_name[32]; - get_dimm_params(dimm_name); + ddr3_get_dimm_params(dimm_name); printf("Detected SO-DIMM [%s]\n", dimm_name); @@ -299,21 +30,25 @@ void ddr3_init(void) /* PG 2.0 */ /* Reset DDR3A PHY after PLL enabled */ ddr3_reset_ddrphy(); + ddr3phy_1600_8g.zq0cr1 |= 0x10000; + ddr3phy_1600_8g.zq1cr1 |= 0x10000; + ddr3phy_1600_8g.zq2cr1 |= 0x10000; ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1600_64A_pg2); + &ddr3phy_1600_8g); } else { /* PG 1.1 */ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1600_64A); + &ddr3phy_1600_8g); } ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1600_64); + &ddr3_1600_8g); printf("DRAM: Capacity 8 GiB (includes reported below)\n"); } else { - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32); + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); + ddr3_1600_8g.sdcfg |= 0x1000; ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1600_32); + &ddr3_1600_8g); printf("DRAM: Capacity 4 GiB (includes reported below)\n"); } } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { @@ -323,27 +58,27 @@ void ddr3_init(void) /* PG 2.0 */ /* Reset DDR3A PHY after PLL enabled */ ddr3_reset_ddrphy(); + ddr3phy_1333_2g.zq0cr1 |= 0x10000; + ddr3phy_1333_2g.zq1cr1 |= 0x10000; + ddr3phy_1333_2g.zq2cr1 |= 0x10000; ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1333_64A_pg2); + &ddr3phy_1333_2g); } else { /* PG 1.1 */ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, - &ddr3phy_1333_64A); + &ddr3phy_1333_2g); } ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1333_64); + &ddr3_1333_2g); } else { - ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32); + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g); + ddr3_1333_2g.sdcfg |= 0x1000; ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, - &ddr3_1333_32); + &ddr3_1333_2g); } } else { printf("Unknown SO-DIMM. Cannot configure DDR3\n"); while (1) ; } - - init_pll(&ddr3b_333); - ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64); - ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); } -- cgit From 5c76f78858054e27c6c21e34307003b3649c61ae Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 16 Jul 2014 00:59:22 +0300 Subject: ARM: keystone2: add K2E SoC hardware definitions This patch adds hardware definitions specific to Keystone II K2E device. It has a lot common definitions with k2hk SoC, so move them to common hardware.h. This is preparation patch for adding K2E SoC support. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/include/asm/arch-keystone/hardware-k2e.h | 44 ++++++++++++++++ arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 44 ---------------- arch/arm/include/asm/arch-keystone/hardware.h | 61 ++++++++++++++++++++++ 3 files changed, 105 insertions(+), 44 deletions(-) create mode 100644 arch/arm/include/asm/arch-keystone/hardware-k2e.h diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h new file mode 100644 index 0000000000..62172a4b84 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h @@ -0,0 +1,44 @@ +/* + * K2E: SoC definitions + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_HARDWARE_K2E_H +#define __ASM_ARCH_HARDWARE_K2E_H + +/* PA SS Registers */ +#define KS2_PASS_BASE 0x24000000 + +/* Power and Sleep Controller (PSC) Domains */ +#define KS2_LPSC_MOD_RST 0 +#define KS2_LPSC_USB_1 1 +#define KS2_LPSC_USB 2 +#define KS2_LPSC_EMIF25_SPI 3 +#define KS2_LPSC_TSIP 4 +#define KS2_LPSC_DEBUGSS_TRC 5 +#define KS2_LPSC_TETB_TRC 6 +#define KS2_LPSC_PKTPROC 7 +#define KS2_LPSC_PA KS2_LPSC_PKTPROC +#define KS2_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII +#define KS2_LPSC_CRYPTO 9 +#define KS2_LPSC_PCIE 10 +#define KS2_LPSC_VUSR0 12 +#define KS2_LPSC_CHIP_SRSS 13 +#define KS2_LPSC_MSMC 14 +#define KS2_LPSC_EMIF4F_DDR3 23 +#define KS2_LPSC_PCIE_1 27 +#define KS2_LPSC_XGE 50 + +/* Chip Interrupt Controller */ +#define KS2_CIC2_DDR3_ECC_IRQ_NUM -1 /* not defined in K2E */ +#define KS2_CIC2_DDR3_ECC_CHAN_NUM -1 /* not defined in K2E */ + +/* Number of DSP cores */ +#define KS2_NUM_DSPS 1 + +#endif diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index e7dff059b8..eb132f73e6 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -10,46 +10,16 @@ #ifndef __ASM_ARCH_HARDWARE_K2HK_H #define __ASM_ARCH_HARDWARE_K2HK_H -#define KS2_PLL_CNTRL_BASE 0x02310000 -#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE -#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8) -#define KS2_RSTCTRL_KEY 0x5a69 -#define KS2_RSTCTRL_MASK 0xffff0000 -#define KS2_RSTCTRL_SWRST 0xfffe0000 - -#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 -#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) -#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) - #define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) #define KS2_ARM_PLL_EN BIT(13) -#define KS2_SPI0_BASE 0x21000400 -#define KS2_SPI1_BASE 0x21000600 -#define KS2_SPI2_BASE 0x21000800 -#define KS2_SPI_BASE KS2_SPI0_BASE - -/* Chip configuration unlock codes and registers */ -#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) -#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) -#define KS2_KICK0_MAGIC 0x83e70b13 -#define KS2_KICK1_MAGIC 0x95a4f1e0 - /* PA SS Registers */ #define KS2_PASS_BASE 0x02000000 /* PLL control registers */ -#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) -#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) -#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) -#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) -#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) -#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) #define KS2_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) #define KS2_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) -#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) -#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) /* Power and Sleep Controller (PSC) Domains */ #define KS2_LPSC_MOD 0 @@ -106,25 +76,11 @@ #define KS2_LPSC_XGE 50 #define KS2_LPSC_ARM_SREFLEX 51 -/* DDR3A definitions */ -#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000 -#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000 -#define KS2_DDR3A_DDRPHYC 0x02329000 /* DDR3B definitions */ #define KS2_DDR3B_EMIF_CTRL_BASE 0x21020000 #define KS2_DDR3B_EMIF_DATA_BASE 0x60000000 #define KS2_DDR3B_DDRPHYC 0x02328000 -/* Queue manager */ -#define KS2_QM_MANAGER_BASE 0x02a02000 -#define KS2_QM_DESC_SETUP_BASE 0x02a03000 -#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000 -#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 -#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000 - -/* MSMC control */ -#define KS2_MSMC_CTRL_BASE 0x0bc00000 - /* Number of DSP cores */ #define KS2_NUM_DSPS 8 diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index 133edadc2a..9c86b695b4 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -69,6 +69,11 @@ typedef volatile unsigned int *dv_reg_p; #define NOSRA_MASK 0x08000000 #define ECC_MASK 0x00000001 +/* DDR3 definitions */ +#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000 +#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000 +#define KS2_DDR3A_DDRPHYC 0x02329000 + #define KS2_DDR3_MIDR_OFFSET 0x00 #define KS2_DDR3_STATUS_OFFSET 0x04 #define KS2_DDR3_SDCFG_OFFSET 0x08 @@ -85,12 +90,46 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_UART0_BASE 0x02530c00 #define KS2_UART1_BASE 0x02531000 +/* Boot Config */ +#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 +#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) +#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) + /* PSC */ #define KS2_PSC_BASE 0x02350000 #define KS2_LPSC_GEM_0 15 #define KS2_LPSC_TETRIS 52 #define KS2_TETRIS_PWR_DOMAIN 31 +/* Chip configuration unlock codes and registers */ +#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) +#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) +#define KS2_KICK0_MAGIC 0x83e70b13 +#define KS2_KICK1_MAGIC 0x95a4f1e0 + +/* PLL control registers */ +#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) +#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) +#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) +#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) +#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) +#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) +#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) +#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) + +#define KS2_PLL_CNTRL_BASE 0x02310000 +#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE +#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8) +#define KS2_RSTCTRL_KEY 0x5a69 +#define KS2_RSTCTRL_MASK 0xffff0000 +#define KS2_RSTCTRL_SWRST 0xfffe0000 + +/* SPI */ +#define KS2_SPI0_BASE 0x21000400 +#define KS2_SPI1_BASE 0x21000600 +#define KS2_SPI2_BASE 0x21000800 +#define KS2_SPI_BASE KS2_SPI0_BASE + /* AEMIF */ #define KS2_AEMIF_CNTRL_BASE 0x21000a00 #define DAVINCI_ASYNC_EMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE @@ -98,10 +137,24 @@ typedef volatile unsigned int *dv_reg_p; /* Flag from ks2_debug options to check if DSPs need to stay ON */ #define DBG_LEAVE_DSPS_ON 0x1 +/* Queue manager */ +#define KS2_QM_MANAGER_BASE 0x02a02000 +#define KS2_QM_DESC_SETUP_BASE 0x02a03000 +#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000 +#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 +#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000 + +/* MSMC control */ +#define KS2_MSMC_CTRL_BASE 0x0bc00000 + #ifdef CONFIG_SOC_K2HK #include #endif +#ifdef CONFIG_SOC_K2E +#include +#endif + #ifndef __ASSEMBLY__ static inline int cpu_is_k2hk(void) { @@ -111,6 +164,14 @@ static inline int cpu_is_k2hk(void) return (part_no == 0xb981) ? 1 : 0; } +static inline int cpu_is_k2e(void) +{ + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); + unsigned int part_no = (jtag_id >> 12) & 0xffff; + + return (part_no == 0xb9a6) ? 1 : 0; +} + static inline int cpu_revision(void) { unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); -- cgit From 4dca7f0acc88708100a2b25b019befc9eea02f45 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 16 Jul 2014 00:59:23 +0300 Subject: ARM: keystone2: clock: add K2E clock support This patch adds clock definitions and commands to support Keystone2 K2E SOC. Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/Makefile | 1 + arch/arm/cpu/armv7/keystone/clock-k2e.c | 101 +++++++++++++++++++++++++ arch/arm/cpu/armv7/keystone/clock.c | 2 + arch/arm/cpu/armv7/keystone/cmd_clock.c | 31 ++++++-- arch/arm/include/asm/arch-keystone/clock-k2e.h | 68 +++++++++++++++++ arch/arm/include/asm/arch-keystone/clock.h | 4 + include/configs/ks2_evm.h | 2 +- 7 files changed, 203 insertions(+), 6 deletions(-) create mode 100644 arch/arm/cpu/armv7/keystone/clock-k2e.c create mode 100644 arch/arm/include/asm/arch-keystone/clock-k2e.h diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile index 74c516013a..f8519c0403 100644 --- a/arch/arm/cpu/armv7/keystone/Makefile +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -9,6 +9,7 @@ obj-y += init.o obj-y += psc.o obj-y += clock.o obj-$(CONFIG_SOC_K2HK) += clock-k2hk.o +obj-$(CONFIG_SOC_K2E) += clock-k2e.o obj-y += cmd_clock.o obj-y += cmd_mon.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o diff --git a/arch/arm/cpu/armv7/keystone/clock-k2e.c b/arch/arm/cpu/armv7/keystone/clock-k2e.c new file mode 100644 index 0000000000..42092e1060 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/clock-k2e.c @@ -0,0 +1,101 @@ +/* + * Keystone2: get clk rate for K2E + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +const struct keystone_pll_regs keystone_pll_regs[] = { + [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, + [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, + [DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, +}; + +/** + * pll_freq_get - get pll frequency + * Fout = Fref * NF(mult) / NR(prediv) / OD + * @pll: pll identifier + */ +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, output_div = 2; + unsigned long ret; + u32 tmp, reg; + + if (pll == CORE_PLL) { + ret = external_clk[sys_clk]; + if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { + /* PLL mode */ + tmp = __raw_readl(KS2_MAINPLLCTL0); + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | + (pllctl_reg_read(pll, mult) & + PLLM_MULT_LO_MASK)) + 1; + output_div = ((pllctl_reg_read(pll, secctl) >> + PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; + + ret = ret / prediv / output_div * mult; + } + } else { + switch (pll) { + case PASS_PLL: + ret = external_clk[pa_clk]; + reg = KS2_PASSPLLCTL0; + break; + case DDR3_PLL: + ret = external_clk[ddr3_clk]; + reg = KS2_DDR3APLLCTL0; + break; + default: + return 0; + } + + tmp = __raw_readl(reg); + + if (!(tmp & PLLCTL_BYPASS)) { + /* Bypass disabled */ + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + output_div = ((tmp >> PLL_CLKOD_SHIFT) & + PLL_CLKOD_MASK) + 1; + ret = ((ret / prediv) * mult) / output_div; + } + } + + return ret; +} + +unsigned long clk_get_rate(unsigned int clk) +{ + switch (clk) { + case core_pll_clk: return pll_freq_get(CORE_PLL); + case pass_pll_clk: return pll_freq_get(PASS_PLL); + case ddr3_pll_clk: return pll_freq_get(DDR3_PLL); + case sys_clk0_1_clk: + case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); + case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); + case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); + case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); + case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; + case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; + case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; + case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; + case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; + case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; + case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; + case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; + case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; + case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; + case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; + default: + break; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index 42b664b576..03c1d9f660 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -106,6 +106,7 @@ void init_pll(const struct pll_init_data *data) tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN); +#ifndef CONFIG_SOC_K2E } else if (data->pll == TETRIS_PLL) { bwadj = pllm >> 1; /* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */ @@ -156,6 +157,7 @@ void init_pll(const struct pll_init_data *data) * only applicable for Kepler */ setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); +#endif } else { setbits_le32(keystone_pll_regs[data->pll].reg1, PLLCTL_ENSAT); /* diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/cpu/armv7/keystone/cmd_clock.c index afd30f3853..d97c95be11 100644 --- a/arch/arm/cpu/armv7/keystone/cmd_clock.c +++ b/arch/arm/cpu/armv7/keystone/cmd_clock.c @@ -14,10 +14,10 @@ #include struct pll_init_data cmd_pll_data = { - .pll = MAIN_PLL, - .pll_m = 16, - .pll_d = 1, - .pll_od = 2, + .pll = MAIN_PLL, + .pll_m = 16, + .pll_d = 1, + .pll_od = 2, }; int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -27,12 +27,19 @@ int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (strncmp(argv[1], "pa", 2) == 0) cmd_pll_data.pll = PASS_PLL; +#ifndef CONFIG_SOC_K2E else if (strncmp(argv[1], "arm", 3) == 0) cmd_pll_data.pll = TETRIS_PLL; +#endif +#ifdef CONFIG_SOC_K2HK else if (strncmp(argv[1], "ddr3a", 5) == 0) cmd_pll_data.pll = DDR3A_PLL; else if (strncmp(argv[1], "ddr3b", 5) == 0) cmd_pll_data.pll = DDR3B_PLL; +#else + else if (strncmp(argv[1], "ddr3", 4) == 0) + cmd_pll_data.pll = DDR3_PLL; +#endif else goto pll_cmd_usage; @@ -51,11 +58,20 @@ pll_cmd_usage: return cmd_usage(cmdtp); } +#ifdef CONFIG_SOC_K2HK U_BOOT_CMD( pllset, 5, 0, do_pll_cmd, "set pll multiplier and pre divider", "
\n" ); +#endif +#ifdef CONFIG_SOC_K2E +U_BOOT_CMD( + pllset, 5, 0, do_pll_cmd, + "set pll multiplier and pre divider", + "
\n" +); +#endif int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -79,7 +95,12 @@ U_BOOT_CMD( getclk, 2, 0, do_getclk_cmd, "get clock rate", "\n" - "See the 'enum clk_e' in the k2hk clock.h for clk indexes\n" +#ifdef CONFIG_SOC_K2HK + "See the 'enum clk_e' in the clock-k2hk.h for clk indexes\n" +#endif +#ifdef CONFIG_SOC_K2E + "See the 'enum clk_e' in the clock-k2e.h for clk indexes\n" +#endif ); int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/arch/arm/include/asm/arch-keystone/clock-k2e.h b/arch/arm/include/asm/arch-keystone/clock-k2e.h new file mode 100644 index 0000000000..41478110e5 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock-k2e.h @@ -0,0 +1,68 @@ +/* + * K2E: Clock management APIs + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_K2E_H +#define __ASM_ARCH_CLOCK_K2E_H + +enum ext_clk_e { + sys_clk, + alt_core_clk, + pa_clk, + ddr3_clk, + mcm_clk, + pcie_clk, + sgmii_clk, + xgmii_clk, + usb_clk, + ext_clk_count /* number of external clocks */ +}; + +extern unsigned int external_clk[ext_clk_count]; + +enum clk_e { + core_pll_clk, + pass_pll_clk, + ddr3_pll_clk, + sys_clk0_clk, + sys_clk0_1_clk, + sys_clk0_2_clk, + sys_clk0_3_clk, + sys_clk0_4_clk, + sys_clk0_6_clk, + sys_clk0_8_clk, + sys_clk0_12_clk, + sys_clk0_24_clk, + sys_clk1_clk, + sys_clk1_3_clk, + sys_clk1_4_clk, + sys_clk1_6_clk, + sys_clk1_12_clk, + sys_clk2_clk, + sys_clk3_clk +}; + +#define KS2_CLK1_6 sys_clk0_6_clk + +/* PLL identifiers */ +enum pll_type_e { + CORE_PLL, + PASS_PLL, + DDR3_PLL, +}; + +#define CORE_PLL_800 {CORE_PLL, 16, 1, 2} +#define CORE_PLL_1000 {CORE_PLL, 20, 1, 2} +#define CORE_PLL_1200 {CORE_PLL, 24, 1, 2} +#define PASS_PLL_1000 {PASS_PLL, 20, 1, 2} +#define DDR3_PLL_200 {DDR3_PLL, 4, 1, 2} +#define DDR3_PLL_400 {DDR3_PLL, 16, 1, 4} +#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2} +#define DDR3_PLL_333 {DDR3_PLL, 20, 1, 6} + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h index c7da3520c4..1513c76b6a 100644 --- a/arch/arm/include/asm/arch-keystone/clock.h +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -16,6 +16,10 @@ #include #endif +#ifdef CONFIG_SOC_K2E +#include +#endif + #define MAIN_PLL CORE_PLL #include diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 29f0b9b621..43db581c75 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -80,7 +80,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI #define CONFIG_CMD_SPI -#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI) +#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6) #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #define CONFIG_SYS_SPI0 -- cgit From 20187fd11c37226fac8661bbac96ddd4fdf507b1 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 16 Jul 2014 00:59:24 +0300 Subject: ARM: keystone2: add MSMC cache coherency support for K2E SOC This patch adds Keystone2 K2E SOC specific code to support MSMC cache coherency. Also create header file for msmc to hold its API. Acked-by: Murali Karicheri Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/init.c | 12 +++++++----- arch/arm/cpu/armv7/keystone/msmc.c | 4 ++-- arch/arm/include/asm/arch-keystone/hardware.h | 1 - arch/arm/include/asm/arch-keystone/msmc.h | 17 +++++++++++++++++ 4 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 arch/arm/include/asm/arch-keystone/msmc.h diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c index f4c293aa89..a8f8aee8ab 100644 --- a/arch/arm/cpu/armv7/keystone/init.c +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -24,11 +25,12 @@ int arch_cpu_init(void) chip_configuration_unlock(); icache_enable(); -#ifdef CONFIG_SOC_K2HK - share_all_segments(8); - share_all_segments(9); - share_all_segments(10); /* QM PDSP */ - share_all_segments(11); /* PCIE */ + msmc_share_all_segments(8); /* TETRIS */ + msmc_share_all_segments(9); /* NETCP */ + msmc_share_all_segments(10); /* QM PDSP */ + msmc_share_all_segments(11); /* PCIE 0 */ +#ifdef CONFIG_SOC_K2E + msmc_share_all_segments(13); /* PCIE 1 */ #endif /* diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c index af858fa758..7d8e5978df 100644 --- a/arch/arm/cpu/armv7/keystone/msmc.c +++ b/arch/arm/cpu/armv7/keystone/msmc.c @@ -8,7 +8,7 @@ */ #include -#include +#include struct mpax { u32 mpaxl; @@ -56,7 +56,7 @@ struct msms_regs { }; -void share_all_segments(int priv_id) +void msmc_share_all_segments(int priv_id) { struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE; int j; diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index 9c86b695b4..bcfb5517ea 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -180,7 +180,6 @@ static inline int cpu_revision(void) return rev; } -void share_all_segments(int priv_id); int cpu_to_bus(u32 *ptr, u32 length); void sdelay(unsigned long); diff --git a/arch/arm/include/asm/arch-keystone/msmc.h b/arch/arm/include/asm/arch-keystone/msmc.h new file mode 100644 index 0000000000..c320db5b65 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/msmc.h @@ -0,0 +1,17 @@ +/* + * MSMC controller + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MSMC_H_ +#define _MSMC_H_ + +#include + +void msmc_share_all_segments(int priv_id); + +#endif -- cgit From 7c387646060c6221836b332f5d0e0c9771ab99c1 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 16 Jul 2014 00:59:25 +0300 Subject: keystone2: use CONFIG_SOC_KEYSTONE in common places Use CONFIG_SOC_KEYSTONE in common places instead of defining a lot of "if def .. || if def " for different Keystone2 SoC types. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- common/image-fdt.c | 2 +- drivers/serial/ns16550.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/common/image-fdt.c b/common/image-fdt.c index 9fc7481fd8..7795b80ccf 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -492,7 +492,7 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, if (!ft_verify_fdt(blob)) return -1; -#ifdef CONFIG_SOC_K2HK +#if defined(CONFIG_SOC_KEYSTONE) if (IMAGE_OF_BOARD_SETUP) ft_board_setup_ex(blob, gd->bd); #endif diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index f26979dbe1..8e7052dda7 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -30,7 +30,7 @@ #define serial_in(y) readb(y) #endif -#if defined(CONFIG_K2HK_EVM) +#if defined(CONFIG_SOC_KEYSTONE) #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) #undef UART_MCRVAL @@ -88,7 +88,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) /* /16 is proper to hit 115200 with 48MHz */ serial_out(0, &com_port->mdr1); #endif /* CONFIG_OMAP */ -#if defined(CONFIG_K2HK_EVM) +#if defined(CONFIG_SOC_KEYSTONE) serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); #endif } -- cgit From 1284246eb97769b0da5483fb92a8c0940b46b739 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 16 Jul 2014 00:59:26 +0300 Subject: ARM: keystone2: spl: add K2E SoC support Keystone2 K2E SoC has slightly different spl pll settings then K2HK, so correct this. Acked-by: Murali Karicheri Signed-off-by: Ivan Khoronzhuk --- arch/arm/cpu/armv7/keystone/spl.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/cpu/armv7/keystone/spl.c b/arch/arm/cpu/armv7/keystone/spl.c index e07b64db9e..d4b0e9b163 100644 --- a/arch/arm/cpu/armv7/keystone/spl.c +++ b/arch/arm/cpu/armv7/keystone/spl.c @@ -18,10 +18,18 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_K2HK_EVM static struct pll_init_data spl_pll_config[] = { CORE_PLL_799, TETRIS_PLL_500, }; +#endif + +#ifdef CONFIG_K2E_EVM +static struct pll_init_data spl_pll_config[] = { + CORE_PLL_800, +}; +#endif void spl_init_keystone_plls(void) { -- cgit From a906847966fd097835712b2ad3b5bac340793d43 Mon Sep 17 00:00:00 2001 From: Hao Zhang Date: Wed, 16 Jul 2014 00:59:27 +0300 Subject: board: k2e-evm: add board support This patch adds Keystone2 k2e_evm evaluation board support. Signed-off-by: Hao Zhang Signed-off-by: Ivan Khoronzhuk --- arch/arm/include/asm/arch-keystone/hardware.h | 1 + board/ti/ks2_evm/Makefile | 2 + board/ti/ks2_evm/board_k2e.c | 39 +++++++++++++++++++ board/ti/ks2_evm/ddr3_cfg.c | 40 +++++++++++++++++++ board/ti/ks2_evm/ddr3_cfg.h | 3 ++ board/ti/ks2_evm/ddr3_k2e.c | 55 +++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/k2e_evm.h | 37 ++++++++++++++++++ 8 files changed, 178 insertions(+) create mode 100644 board/ti/ks2_evm/board_k2e.c create mode 100644 board/ti/ks2_evm/ddr3_k2e.c create mode 100644 include/configs/k2e_evm.h diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index bcfb5517ea..ddeb06e7bb 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -119,6 +119,7 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_PLL_CNTRL_BASE 0x02310000 #define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE +#define KS2_RSTCTRL_RSTYPE (KS2_PLL_CNTRL_BASE + 0xe4) #define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8) #define KS2_RSTCTRL_KEY 0x5a69 #define KS2_RSTCTRL_MASK 0xffff0000 diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile index 774a7d526c..00f1164833 100644 --- a/board/ti/ks2_evm/Makefile +++ b/board/ti/ks2_evm/Makefile @@ -9,3 +9,5 @@ obj-y += board.o obj-y += ddr3_cfg.o obj-$(CONFIG_K2HK_EVM) += board_k2hk.o obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o +obj-$(CONFIG_K2E_EVM) += board_k2e.o +obj-$(CONFIG_K2E_EVM) += ddr3_k2e.o diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c new file mode 100644 index 0000000000..d2499b7244 --- /dev/null +++ b/board/ti/ks2_evm/board_k2e.c @@ -0,0 +1,39 @@ +/* + * K2E EVM : Board initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int external_clk[ext_clk_count] = { + [sys_clk] = 100000000, + [alt_core_clk] = 100000000, + [pa_clk] = 100000000, + [ddr3_clk] = 100000000, + [mcm_clk] = 312500000, + [pcie_clk] = 100000000, + [sgmii_clk] = 156250000, + [xgmii_clk] = 156250000, + [usb_clk] = 100000000, +}; + +static struct pll_init_data pll_config[] = { + CORE_PLL_1200, + PASS_PLL_1000, +}; + +#if defined(CONFIG_BOARD_EARLY_INIT_F) +int board_early_init_f(void) +{ + init_plls(ARRAY_SIZE(pll_config), pll_config); + return 0; +} +#endif diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c index 6e55af924f..f7da9f2bcb 100644 --- a/board/ti/ks2_evm/ddr3_cfg.c +++ b/board/ti/ks2_evm/ddr3_cfg.c @@ -93,6 +93,46 @@ struct ddr3_emif_config ddr3_1333_2g = { }; #endif +#ifdef CONFIG_K2E_EVM +/* DDR3 PHY configuration data with 1600M rate, and 4GB size */ +struct ddr3_phy_config ddr3phy_1600_4g = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x08861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0x9D9CBB66ul, + .dtpr1 = 0x12840300ul, + .dtpr2 = 0x5002D200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0001005Dul, + .zq1cr1 = 0x0001005Bul, + .zq2cr1 = 0x0001005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +/* DDR3 EMIF configuration data with 1600M rate, and 4GB size */ +struct ddr3_emif_config ddr3_1600_4g = { + .sdcfg = 0x6200CE62ul, + .sdtim1 = 0x166C9855ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x421DFF53ul, + .sdtim4 = 0x543F07FFul, + .zqcfg = 0x70073200ul, + .sdrfc = 0x00001869ul, +}; +#endif + int ddr3_get_dimm_params(char *dimm_name) { int ret; diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h index d14bac3640..15fcf52ef1 100644 --- a/board/ti/ks2_evm/ddr3_cfg.h +++ b/board/ti/ks2_evm/ddr3_cfg.h @@ -16,6 +16,9 @@ extern struct ddr3_emif_config ddr3_1600_8g; extern struct ddr3_phy_config ddr3phy_1333_2g; extern struct ddr3_emif_config ddr3_1333_2g; +extern struct ddr3_phy_config ddr3phy_1600_4g; +extern struct ddr3_emif_config ddr3_1600_4g; + int ddr3_get_dimm_params(char *dimm_name); #endif /* __DDR3_CFG_H */ diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c new file mode 100644 index 0000000000..40fd96607d --- /dev/null +++ b/board/ti/ks2_evm/ddr3_k2e.c @@ -0,0 +1,55 @@ +/* + * Keystone2: DDR3 initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include "ddr3_cfg.h" +#include + +static int ddr3_size; +static struct pll_init_data ddr3_400 = DDR3_PLL_400; + +void ddr3_init(void) +{ + char dimm_name[32]; + + if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1)) + init_pll(&ddr3_400); + + ddr3_get_dimm_params(dimm_name); + + printf("Detected SO-DIMM [%s]\n", dimm_name); + + /* Reset DDR3 PHY after PLL enabled */ + ddr3_reset_ddrphy(); + + if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { + /* 8G SO-DIMM */ + ddr3_size = 8; + printf("DRAM: 8 GiB\n"); + ddr3phy_1600_8g.zq0cr1 |= 0x10000; + ddr3phy_1600_8g.zq1cr1 |= 0x10000; + ddr3phy_1600_8g.zq2cr1 |= 0x10000; + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_8g); + } else if (!strcmp(dimm_name, "18KSF51272HZ-1G6K2")) { + /* 4G SO-DIMM */ + ddr3_size = 4; + printf("DRAM: 4 GiB\n"); + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g); + } +} + +/** + * ddr3_get_size - return ddr3 size in GiB + */ +int ddr3_get_size(void) +{ + return ddr3_size; +} diff --git a/boards.cfg b/boards.cfg index f7fbd54890..6ff8e8c618 100644 --- a/boards.cfg +++ b/boards.cfg @@ -301,6 +301,7 @@ Active arm armv7 exynos samsung trats2 Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak Active arm armv7 highbank - highbank highbank - Rob Herring Active arm armv7 keystone ti ks2_evm k2hk_evm - Vitaly Andrianov +Active arm armv7 keystone ti ks2_evm k2e_evm - Vitaly Andrianov Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg - Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h new file mode 100644 index 0000000000..3502d10472 --- /dev/null +++ b/include/configs/k2e_evm.h @@ -0,0 +1,37 @@ +/* + * Configuration header file for TI's k2e-evm + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_K2E_EVM_H +#define __CONFIG_K2E_EVM_H + +/* Platform type */ +#define CONFIG_SOC_K2E +#define CONFIG_K2E_EVM + +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2E EVM # " + +#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" + +#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0" +#define KS2_ADDR_MON "addr_mon=0x0c140000\0" +#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0" +#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0" +#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0" + +#include + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c100000 + +/* NAND Configuration */ +#define CONFIG_SYS_NAND_PAGE_2K + +#endif /* __CONFIG_K2E_EVM_H */ -- cgit From 8c16dd6fa7de448b36778275b456bf4ea53c3306 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 18 Jul 2014 11:18:48 +0530 Subject: ARM: OMAP: Fix handling of errata i727 The errata is applicable on all OMAP4 (4430 and 4460/4470) and OMAP5 ES 1.0 devices. The current revision check erroneously implements this on all DRA7 varients and with DRA722 device (which has only 1 EMIF instance) infact causes an asynchronous abort and ends up masking it in CPSR, only to be uncovered once the kernel switches to userspace. Signed-off-by: Rajendra Nayak Signed-off-by: Sricharan R Signed-off-by: Lokesh Vutla --- arch/arm/cpu/armv7/omap-common/hwinit-common.c | 3 ++- arch/arm/include/asm/omap_common.h | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 5f50a19801..1b4477f469 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -123,7 +123,8 @@ void s_init(void) hw_data_init(); #ifdef CONFIG_SPL_BUILD - if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0)) + if (warm_reset() && + (is_omap44xx() || (omap_revision() == OMAP5430_ES1_0))) force_emif_self_refresh(); #endif watchdog_init(); diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index d1344ee94c..183823404d 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -595,6 +595,14 @@ static inline u32 omap_revision(void) return *omap_si_rev; } +#define OMAP44xx 0x44000000 + +static inline u8 is_omap44xx(void) +{ + extern u32 *const omap_si_rev; + return (*omap_si_rev & 0xFF000000) == OMAP44xx; +}; + #define OMAP54xx 0x54000000 static inline u8 is_omap54xx(void) -- cgit From 77cd89e75563742aa32cf3d216ac9ff649d1d70e Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 18 Jul 2014 17:59:40 +0530 Subject: ARM: omap: fix GPMC address-map size for NAND and NOR devices Fixes commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform 1) NAND device are not directly memory-mapped to CPU address-space, they are indirectly accessed via following GPMC registers: - GPMC_NAND_COMMAND_x - GPMC_NAND_ADDRESS_x - GPMC_NAND_DATA_x Therefore from CPU's point of view, NAND address-map can be limited to just above register addresses. But GPMC chip-select address-map can be configured in granularity of 16MB only. So this patch uses GPMC_SIZE_16M for all NAND devices. 2) NOR device are directly memory-mapped to CPU address-space, so its address-map size depends on actual addressable region in NOR FLASH device. So this patch uses CONFIG_SYS_FLASH_SIZE to derive GPMC chip-select address-map size configuration. Signed-off-by: Pekon Gupta --- arch/arm/cpu/armv7/omap-common/mem-common.c | 9 +++++++-- include/configs/am335x_evm.h | 1 + 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c index ba26cd1fdb..e9da70fe70 100644 --- a/arch/arm/cpu/armv7/omap-common/mem-common.c +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c @@ -87,8 +87,12 @@ void gpmc_init(void) STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 }; - u32 size = GPMC_SIZE_16M; u32 base = CONFIG_SYS_FLASH_BASE; + u32 size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M : + /* > 64MB */ ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M : + /* > 32MB */ ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M : + /* > 16MB */ ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M : + /* min 16MB */ GPMC_SIZE_16M))); #elif defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND) /* configure GPMC for NAND */ const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, @@ -99,8 +103,9 @@ void gpmc_init(void) M_NAND_GPMC_CONFIG6, 0 }; - u32 size = GPMC_SIZE_256M; u32 base = CONFIG_SYS_NAND_BASE; + u32 size = GPMC_SIZE_16M; + #elif defined(CONFIG_CMD_ONENAND) const u32 gpmc_regs[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG1, ONENAND_GPMC_CONFIG2, diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index a48b386477..c1a6ada0a8 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -453,6 +453,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_SIZE 0x01000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Reduce SPL size by removing unlikey targets */ #ifdef CONFIG_NOR_BOOT -- cgit From 222a3113b46c4a16de3f51747201ca6565c8ee6a Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 18 Jul 2014 17:59:41 +0530 Subject: ARM: omap: clean redundant PISMO_xx macros used in OMAP3 PISMO_xx macros were used to define 'Platform Independent Storage MOdule' related GPMC configurations. This patch - Replaces these OMAP3 specific macros with generic CONFIG_xx macros as provided by current u-boot infrastructure. - Removes unused redundant macros, which are no longer required after merging of common platform code in following commit commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform +-----------------+-----------------------------------------------------------+ | Macro | Reason for removal | +-----------------+-----------------------------------------------------------+ | PISMO1_NOR_BASE | duplicate of CONFIG_SYS_FLASH_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_NAND_BASE| duplicate of CONFIG_SYS_NAND_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_ONEN_BASE| duplicate of CONFIG_SYS_ONENAND_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_NAND_SIZE| GPMC accesses NAND device via I/O mapped registers so | | | configuring GPMC chip-select for smallest allowable | | | segment (GPMC_SIZE_16M) is enough. | +-----------------+-----------------------------------------------------------+ | PISMO1_ONEN_SIZE| OneNAND uses a fixed GPMC chip-select address-space of | | | 128MB (GPMC_SIZE_128M) | +-----------------+-----------------------------------------------------------+ +-----------------+-----------------------------------------------------------+ | PISMO1_NOR | Unused Macros | | PISMO1_NAND | | | PISMO2_CS0 | | | PISMO2_CS1 | | | PISMO1_ONENAND | | | PISMO2_NAND_CS0 | | | PISMO2_NAND_CS1 | | | PISMO1_NOR_BASE | | | PISMO1_NAND_BASE| | | PISMO2_CS0_BASE | | +-----------------+-----------------------------------------------------------+ Signed-off-by: Pekon Gupta --- arch/arm/cpu/armv7/omap-common/mem-common.c | 4 ++-- arch/arm/include/asm/arch-am33xx/mem.h | 7 ------- arch/arm/include/asm/arch-omap3/cpu.h | 1 - arch/arm/include/asm/arch-omap3/mem.h | 13 ------------- include/configs/am3517_crane.h | 7 +------ include/configs/am3517_evm.h | 7 +------ include/configs/cm_t35.h | 3 --- include/configs/devkit8000.h | 2 -- include/configs/dig297.h | 4 ---- include/configs/mcx.h | 4 ---- include/configs/nokia_rx51.h | 2 -- include/configs/omap3_beagle.h | 7 +------ include/configs/omap3_evm_common.h | 7 ++----- include/configs/omap3_igep00x0.h | 3 --- include/configs/omap3_logic.h | 8 ++------ include/configs/omap3_overo.h | 6 +----- include/configs/omap3_pandora.h | 7 +------ include/configs/omap3_zoom1.h | 7 +------ include/configs/tam3517-common.h | 4 ---- include/configs/tao3530.h | 7 +------ include/configs/tricorder.h | 2 -- 21 files changed, 13 insertions(+), 99 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c index e9da70fe70..fc4290c3c4 100644 --- a/arch/arm/cpu/armv7/omap-common/mem-common.c +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c @@ -115,8 +115,8 @@ void gpmc_init(void) ONENAND_GPMC_CONFIG6, 0 }; - u32 base = PISMO1_ONEN_BASE; - u32 size = PISMO1_ONEN_SIZE; + u32 size = GPMC_SIZE_128M; + u32 base = CONFIG_SYS_ONENAND_BASE; #else const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 }; u32 size = 0; diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h index e7e8c58b00..b2412b56e1 100644 --- a/arch/arm/include/asm/arch-am33xx/mem.h +++ b/arch/arm/include/asm/arch-am33xx/mem.h @@ -59,13 +59,6 @@ /* max number of GPMC regs */ #define GPMC_MAX_REG 7 -#define PISMO1_NOR 1 -#define PISMO1_NAND 2 -#define PISMO2_CS0 3 -#define PISMO2_CS1 4 -#define PISMO1_ONENAND 5 #define DBG_MPDB 6 -#define PISMO2_NAND_CS0 7 -#define PISMO2_NAND_CS1 8 #endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 4d06ef83fe..53cc2b098a 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -98,7 +98,6 @@ struct ctrl_id { #define DEBUG_BASE 0x08000000 /* debug board */ #define NAND_BASE 0x30000000 /* NAND addr */ /* (actual size small port) */ -#define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */ #define ONENAND_MAP 0x20000000 /* OneNand addr */ /* (actual size small port) */ /* SMS */ diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index d2dfb1e19a..0b78c1ca60 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -427,20 +427,7 @@ enum { /* max number of GPMC regs */ #define GPMC_MAX_REG 7 -#define PISMO1_NOR 1 -#define PISMO1_NAND 2 -#define PISMO2_CS0 3 -#define PISMO2_CS1 4 -#define PISMO1_ONENAND 5 #define DBG_MPDB 6 -#define PISMO2_NAND_CS0 7 -#define PISMO2_NAND_CS1 8 - -/* make it readable for the gpmc_init */ -#define PISMO1_NOR_BASE FLASH_BASE -#define PISMO1_NAND_BASE NAND_BASE -#define PISMO2_CS0_BASE PISMO2_MAP1 -#define PISMO1_ONEN_BASE ONENAND_MAP #define DBG_MPDB_BASE DEBUG_BASE #ifndef __ASSEMBLY__ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index ad4cbd88b8..d826214efe 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -252,17 +252,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 0102ff5b7f..a9c5a8f3af 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -259,18 +259,13 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 5c484ef078..d8d71a94ee 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -258,9 +258,6 @@ */ /* **** PISMO SUPPORT *** */ -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5308790fe6..cc53fc9cd7 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -262,8 +262,6 @@ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_ENV_IS_IN_NAND 1 diff --git a/include/configs/dig297.h b/include/configs/dig297.h index ce205e9b3e..7e47c56453 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -251,10 +251,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_FLASH_BASE boot_flash_base diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 47244c0034..75abb602cf 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -316,10 +316,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index e0c0fac8e1..216dbef192 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -220,8 +220,6 @@ #ifdef ONENAND_SUPPORT -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index c02348354a..e951389d3b 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -265,13 +265,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index ae4ce63f67..739d392edc 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -95,9 +95,6 @@ /* * PISMO support */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - /* Monitor at start of flash - Reserve 2 sectors */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -205,12 +202,12 @@ * NAND / OneNAND */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #endif diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 79daabd6bb..0bb79ab6b5 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -146,8 +146,6 @@ */ #ifdef CONFIG_BOOT_ONENAND -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */ - #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ @@ -158,7 +156,6 @@ #endif #ifdef CONFIG_NAND -#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 8dcbba3c40..717c935d2c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -277,16 +277,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index f7483a0827..38f8dabb2d 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -173,12 +173,8 @@ 0x01F00000) /* 31MB */ /* FLASH and environment organization */ -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index da67787e69..c22c1fc6aa 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -220,15 +220,10 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 3efe4cf815..236281aa0f 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -165,13 +165,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 0c2f0f19c8..aa0ea162d2 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -181,10 +181,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 62613e1eaa..9fc31bed6a 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -254,13 +254,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 847e099512..6c2f65305f 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -317,8 +317,6 @@ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -- cgit From 434f2cfcad9f70231ad5a096325ba72ef0d2a2cc Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Fri, 18 Jul 2014 17:59:42 +0530 Subject: ARM: omap: move board specific NAND configs out from ti_armv7_common.h This patch moves some board specific NAND configs: - FROM: generic config file 'ti_armv7_common.h' - TO: individual board config files using these configs. So that each board can independently set the value as per its design. Following configs are affected in this patch: CONFIG_SYS_NAND_U_BOOT_OFFS: CONFIG_CMD_SPL_NAND_OFS: CONFIG_SYS_NAND_SPL_KERNEL_OFFS: CONFIG_CMD_SPL_WRITE_SIZE: This patch also updates documentation for few of above NAND configs. Signed-off-by: Pekon Gupta --- doc/README.nand | 12 ++++++++++++ include/configs/am335x_evm.h | 5 +++++ include/configs/cm_t335.h | 5 +++++ include/configs/omap3_beagle.h | 6 ++++++ include/configs/omap3_igep00x0.h | 7 +++++++ include/configs/omap3_overo.h | 6 ++++++ include/configs/omap3_zoom1.h | 6 ++++++ include/configs/pengwyn.h | 6 ++++++ include/configs/ti_armv7_common.h | 8 -------- 9 files changed, 53 insertions(+), 8 deletions(-) diff --git a/doc/README.nand b/doc/README.nand index 70cf768d23..e29188f1ec 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -89,6 +89,10 @@ Commands: Configuration Options: + CONFIG_SYS_NAND_U_BOOT_OFFS + NAND Offset from where SPL will read u-boot image. This is the starting + address of u-boot MTD partition in NAND. + CONFIG_CMD_NAND Enables NAND support and commmands. @@ -226,6 +230,14 @@ Platform specific options detection. However ECC calculation on such plaforms would still be done by GPMC controller. + CONFIG_SPL_NAND_AM33XX_BCH + Enables SPL-NAND driver (am335x_spl_bch.c) which supports ELM based + hardware ECC correction. This is useful for platforms which have ELM + hardware engine and use NAND boot mode. + Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, + so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling + SPL-NAND driver with software ECC correction support. + CONFIG_NAND_OMAP_ECCSCHEME On OMAP platforms, this CONFIG specifies NAND ECC scheme. It can take following values: diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index c1a6ada0a8..f5bfd5d627 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -254,6 +254,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4d1dd28a91..a3e6452ec1 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -150,6 +150,11 @@ #define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_NAND_ONFI_DETECTION +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x400000 /* un-assigned: (using dtb) */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* GPIO pin + bank to pin ID mapping */ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index e951389d3b..fe07990640 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -303,5 +303,11 @@ #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 0bb79ab6b5..006c9a9c0d 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -196,6 +196,13 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif /* __IGEP00X0_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 38f8dabb2d..e66f30655d 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -216,5 +216,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 236281aa0f..93f4d627a1 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -70,6 +70,12 @@ "4m(kernel),-(fs)" #if defined(CONFIG_CMD_NAND) +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #endif diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 85104057a9..4684ad6852 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -159,6 +159,12 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* * USB configuration. We enable MUSB support, both for host and for diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 6e0bf09058..85c027c1d2 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -243,13 +243,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -/* NAND */ -#ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif - /* spl export command */ #define CONFIG_CMD_SPL #endif @@ -275,7 +268,6 @@ #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_MTD_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* !CONFIG_NOR_BOOT */ -- cgit