From 8655b6f8603f12099e534a10f7840630b3e93026 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 9 Oct 2004 23:25:58 +0000 Subject: * Clean up tools/bmp_logo.c to not add trailing white space * Patch by Hinko Kocevar, 21 Aug 2004: - Group common framebuffer functions in common/lcd.c - Group common framebuffer macros and #defines in include/lcd.h - Provide calc_fbsize() for video ATAG --- CHANGELOG | 9 +- common/Makefile | 7 +- common/cmd_bmp.c | 1 + common/lcd.c | 740 +++++++++++++++++++++++++++++++++++++++++++ cpu/mpc8xx/lcd.c | 846 +++---------------------------------------------- cpu/pxa/pxafb.c | 910 +++++++++-------------------------------------------- include/bmp_logo.h | 2 +- include/lcd.h | 261 ++++++++++++++- lib_arm/armlinux.c | 19 +- tools/bmp_logo.c | 18 +- 10 files changed, 1205 insertions(+), 1608 deletions(-) create mode 100644 common/lcd.c diff --git a/CHANGELOG b/CHANGELOG index ce1e7342a0..9fefb67819 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,13 +2,20 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Clean up tools/bmp_logo.c to not add trailing white space + +* Patch by Hinko Kocevar, 21 Aug 2004: + - Group common framebuffer functions in common/lcd.c + - Group common framebuffer macros and #defines in include/lcd.h + - Provide calc_fbsize() for video ATAG + * Patch by Sam Song, 21 August 2004: - Fix a typo in README - Align "(RO)" output for "flinfo" after "protect on" - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency ratio 1:1 when core frequency less than 50MHz -* Patches by himba, 21 Aug 2004: +* Patches by Hinko Kocevar, 21 Aug 2004: - fix some "use of label at end of compound statement" warnings - Define type of LCD panel on lubbock board if CONFIG_LCD is used diff --git a/common/Makefile b/common/Makefile index 943da5e475..7d92cabdae 100644 --- a/common/Makefile +++ b/common/Makefile @@ -27,7 +27,7 @@ LIB = libcommon.a AOBJS = -COBJS = main.o ACEX1K.o altera.o bedbug.o \ +COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ cmd_ace.o cmd_autoscript.o \ cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \ cmd_cache.o cmd_console.o \ @@ -44,10 +44,11 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o \ environment.o env_common.o \ env_nand.o env_dataflash.o env_flash.o env_eeprom.o env_nvram.o env_nowhere.o exports.o \ flash.o fpga.o \ - hush.o kgdb.o lists.o lynxkdi.o memsize.o miiphybb.o miiphyutil.o \ + hush.o kgdb.o lcd.o lists.o lynxkdi.o \ + memsize.o miiphybb.o miiphyutil.o \ s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o \ usb.o usb_kbd.o usb_storage.o \ - virtex2.o xilinx.o circbuf.o + virtex2.o xilinx.o OBJS = $(AOBJS) $(COBJS) diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index 3a971334bb..daa54e7769 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -28,6 +28,7 @@ #include #include #include +#include #if (CONFIG_COMMANDS & CFG_CMD_BMP) diff --git a/common/lcd.c b/common/lcd.c new file mode 100644 index 0000000000..85b44cad15 --- /dev/null +++ b/common/lcd.c @@ -0,0 +1,740 @@ +/* + * Common LCD routines for supported CPUs + * + * (C) Copyright 2001-2002 + * Wolfgang Denk, DENX Software Engineering -- wd@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************/ +/* ** HEADER FILES */ +/************************************************************************/ + +/* #define DEBUG */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_POST) +#include +#endif +#include + +#if defined(CONFIG_PXA250) +#include +#endif + +#if defined(CONFIG_MPC823) +#include +#include +#endif + + +#ifdef CONFIG_LCD + +/************************************************************************/ +/* ** FONT DATA */ +/************************************************************************/ +#include /* Get font data, width and height */ + + +ulong lcd_setmem (ulong addr); + +static void lcd_drawchars (ushort x, ushort y, uchar *str, int count); +static inline void lcd_puts_xy (ushort x, ushort y, uchar *s); +static inline void lcd_putc_xy (ushort x, ushort y, uchar c); + +static int lcd_init (void *lcdbase); + +static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); +extern void lcd_ctrl_init (void *lcdbase); +extern void lcd_enable (void); +static void *lcd_logo (void); + + +#if LCD_BPP == LCD_COLOR8 +extern void lcd_setcolreg (ushort regno, + ushort red, ushort green, ushort blue); +#endif +#if LCD_BPP == LCD_MONOCHROME +extern void lcd_initcolregs (void); +#endif + +static int lcd_getbgcolor (void); +static void lcd_setfgcolor (int color); +static void lcd_setbgcolor (int color); + +char lcd_is_enabled = 0; +extern vidinfo_t panel_info; + +#ifdef NOT_USED_SO_FAR +static void lcd_getcolreg (ushort regno, + ushort *red, ushort *green, ushort *blue); +static int lcd_getfgcolor (void); +#endif /* NOT_USED_SO_FAR */ + +/************************************************************************/ + +/*----------------------------------------------------------------------*/ + +static void console_scrollup (void) +{ +#if 1 + /* Copy up rows ignoring the first one */ + memcpy (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE); + + /* Clear the last one */ + memset (CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE); +#else + /* + * Poor attempt to optimize speed by moving "long"s. + * But the code is ugly, and not a bit faster :-( + */ + ulong *t = (ulong *)CONSOLE_ROW_FIRST; + ulong *s = (ulong *)CONSOLE_ROW_SECOND; + ulong l = CONSOLE_SCROLL_SIZE / sizeof(ulong); + uchar c = lcd_color_bg & 0xFF; + ulong val= (c<<24) | (c<<16) | (c<<8) | c; + + while (l--) + *t++ = *s++; + + t = (ulong *)CONSOLE_ROW_LAST; + l = CONSOLE_ROW_SIZE / sizeof(ulong); + + while (l-- > 0) + *t++ = val; +#endif +} + +/*----------------------------------------------------------------------*/ + +static inline void console_back (void) +{ + if (--console_col < 0) { + console_col = CONSOLE_COLS-1 ; + if (--console_row < 0) { + console_row = 0; + } + } + + lcd_putc_xy (console_col * VIDEO_FONT_WIDTH, + console_row * VIDEO_FONT_HEIGHT, + ' '); +} + +/*----------------------------------------------------------------------*/ + +static inline void console_newline (void) +{ + ++console_row; + console_col = 0; + + /* Check if we need to scroll the terminal */ + if (console_row >= CONSOLE_ROWS) { + /* Scroll everything up */ + console_scrollup () ; + --console_row; + } +} + +/*----------------------------------------------------------------------*/ + +void lcd_putc (const char c) +{ + if (!lcd_is_enabled) { + serial_putc(c); + return; + } + + switch (c) { + case '\r': console_col = 0; + return; + + case '\n': console_newline(); + return; + + case '\t': /* Tab (8 chars alignment) */ + console_col |= 8; + console_col &= ~7; + + if (console_col >= CONSOLE_COLS) { + console_newline(); + } + return; + + case '\b': console_back(); + return; + + default: lcd_putc_xy (console_col * VIDEO_FONT_WIDTH, + console_row * VIDEO_FONT_HEIGHT, + c); + if (++console_col >= CONSOLE_COLS) { + console_newline(); + } + return; + } + /* NOTREACHED */ +} + +/*----------------------------------------------------------------------*/ + +void lcd_puts (const char *s) +{ + if (!lcd_is_enabled) { + serial_puts (s); + return; + } + + while (*s) { + lcd_putc (*s++); + } +} + +/************************************************************************/ +/* ** Low-Level Graphics Routines */ +/************************************************************************/ + +static void lcd_drawchars (ushort x, ushort y, uchar *str, int count) +{ + uchar *dest; + ushort off, row; + + dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8); + off = x * (1 << LCD_BPP) % 8; + + for (row=0; row < VIDEO_FONT_HEIGHT; ++row, dest += lcd_line_length) { + uchar *s = str; + uchar *d = dest; + int i; + +#if LCD_BPP == LCD_MONOCHROME + uchar rest = *d & -(1 << (8-off)); + uchar sym; +#endif + for (i=0; i> off); + rest = sym << (8-off); +#elif LCD_BPP == LCD_COLOR8 + for (c=0; c<8; ++c) { + *d++ = (bits & 0x80) ? + lcd_color_fg : lcd_color_bg; + bits <<= 1; + } +#elif LCD_BPP == LCD_COLOR16 + for (c=0; c<16; ++c) { + *d++ = (bits & 0x80) ? + lcd_color_fg : lcd_color_bg; + bits <<= 1; + } +#endif + } +#if LCD_BPP == LCD_MONOCHROME + *d = rest | (*d & ((1 << (8-off)) - 1)); +#endif + } +} + +/*----------------------------------------------------------------------*/ + +static inline void lcd_puts_xy (ushort x, ushort y, uchar *s) +{ +#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) + lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s)); +#else + lcd_drawchars (x, y, s, strlen (s)); +#endif +} + +/*----------------------------------------------------------------------*/ + +static inline void lcd_putc_xy (ushort x, ushort y, uchar c) +{ +#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) + lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1); +#else + lcd_drawchars (x, y, &c, 1); +#endif +} + +/************************************************************************/ +/** Small utility to check that you got the colours right */ +/************************************************************************/ +#ifdef LCD_TEST_PATTERN + +#define N_BLK_VERT 2 +#define N_BLK_HOR 3 + +static int test_colors[N_BLK_HOR*N_BLK_VERT] = { + CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW, + CONSOLE_COLOR_BLUE, CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN, +}; + +static void test_pattern (void) +{ + ushort v_max = panel_info.vl_row; + ushort h_max = panel_info.vl_col; + ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT; + ushort h_step = (h_max + N_BLK_HOR - 1) / N_BLK_HOR; + ushort v, h; + uchar *pix = (uchar *)lcd_base; + + printf ("[LCD] Test Pattern: %d x %d [%d x %d]\n", + h_max, v_max, h_step, v_step); + + /* WARNING: Code silently assumes 8bit/pixel */ + for (v=0; vfb_base); + + lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; + + lcd_init (lcd_base); /* LCD initialization */ + + /* Device initialization */ + memset (&lcddev, 0, sizeof (lcddev)); + + strcpy (lcddev.name, "lcd"); + lcddev.ext = 0; /* No extensions */ + lcddev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + lcddev.putc = lcd_putc; /* 'putc' function */ + lcddev.puts = lcd_puts; /* 'puts' function */ + + rc = device_register (&lcddev); + + return (rc == 0) ? 1 : rc; +} + +/*----------------------------------------------------------------------*/ +static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ +#if LCD_BPP == LCD_MONOCHROME + /* Setting the palette */ + lcd_initcolregs(); + +#elif LCD_BPP == LCD_COLOR8 + /* Setting the palette */ + lcd_setcolreg (CONSOLE_COLOR_BLACK, 0, 0, 0); + lcd_setcolreg (CONSOLE_COLOR_RED, 0xFF, 0, 0); + lcd_setcolreg (CONSOLE_COLOR_GREEN, 0, 0xFF, 0); + lcd_setcolreg (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0); + lcd_setcolreg (CONSOLE_COLOR_BLUE, 0, 0, 0xFF); + lcd_setcolreg (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF); + lcd_setcolreg (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF); + lcd_setcolreg (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA); + lcd_setcolreg (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF); +#endif + +#ifndef CFG_WHITE_ON_BLACK + lcd_setfgcolor (CONSOLE_COLOR_BLACK); + lcd_setbgcolor (CONSOLE_COLOR_WHITE); +#else + lcd_setfgcolor (CONSOLE_COLOR_WHITE); + lcd_setbgcolor (CONSOLE_COLOR_BLACK); +#endif /* CFG_WHITE_ON_BLACK */ + +#ifdef LCD_TEST_PATTERN + test_pattern(); +#else + /* set framebuffer to background color */ + memset ((char *)lcd_base, + COLOR_MASK(lcd_getbgcolor()), + lcd_line_length*panel_info.vl_row); +#endif + /* Paint the logo and retrieve LCD base address */ + debug ("[LCD] Drawing the logo...\n"); + lcd_console_address = lcd_logo (); + + console_col = 0; + console_row = 0; + + return (0); +} + +U_BOOT_CMD( + cls, 1, 1, lcd_clear, + "cls - clear screen\n", + NULL +); + +/*----------------------------------------------------------------------*/ + +static int lcd_init (void *lcdbase) +{ + /* Initialize the lcd controller */ + debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase); + + lcd_ctrl_init (lcdbase); + lcd_clear (NULL, 1, 1, NULL); /* dummy args */ + lcd_enable (); + + /* Initialize the console */ + console_col = 0; +#ifdef LCD_INFO_BELOW_LOGO + console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT; +#else + console_row = 1; /* leave 1 blank line below logo */ +#endif + lcd_is_enabled = 1; + + return 0; +} + + +/************************************************************************/ +/* ** ROM capable initialization part - needed to reserve FB memory */ +/************************************************************************/ +/* + * This is called early in the system initialization to grab memory + * for the LCD controller. + * Returns new address for monitor, after reserving LCD buffer memory + * + * Note that this is running from ROM, so no write access to global data. + */ +ulong lcd_setmem (ulong addr) +{ + ulong size; + int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; + + debug ("LCD panel info: %d x %d, %d bit/pix\n", + panel_info.vl_col, panel_info.vl_row, NBITS (panel_info.vl_bpix) ); + + size = line_length * panel_info.vl_row; + + /* Round up to nearest full page */ + size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + + /* Allocate pages for the frame buffer. */ + addr -= size; + + debug ("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr); + + return (addr); +} + +/*----------------------------------------------------------------------*/ + +static void lcd_setfgcolor (int color) +{ + lcd_color_fg = color & 0x0F; +} + +/*----------------------------------------------------------------------*/ + +static void lcd_setbgcolor (int color) +{ + lcd_color_bg = color & 0x0F; +} + +/*----------------------------------------------------------------------*/ + +#ifdef NOT_USED_SO_FAR +static int lcd_getfgcolor (void) +{ + return lcd_color_fg; +} +#endif /* NOT_USED_SO_FAR */ + +/*----------------------------------------------------------------------*/ + +static int lcd_getbgcolor (void) +{ + return lcd_color_bg; +} + +/*----------------------------------------------------------------------*/ + +/************************************************************************/ +/* ** Chipset depending Bitmap / Logo stuff... */ +/************************************************************************/ +#ifdef CONFIG_LCD_LOGO +void bitmap_plot (int x, int y) +{ + ushort *cmap; + ushort i, j; + uchar *bmap; + uchar *fb; + ushort *fb16; +#if defined(CONFIG_PXA250) + struct pxafb_info *fbi = &panel_info.pxa; +#elif defined(CONFIG_MPC823) + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile cpm8xx_t *cp = &(immr->im_cpm); +#endif + + debug ("Logo: width %d height %d colors %d cmap %d\n", + BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, + sizeof(bmp_logo_palette)/(sizeof(ushort))); + + bmap = &bmp_logo_bitmap[0]; + fb = (char *)(lcd_base + y * lcd_line_length + x); + + if (NBITS(panel_info.vl_bpix) < 12) { + /* Leave room for default color map */ +#if defined(CONFIG_PXA250) + cmap = (ushort *)fbi->palette; +#elif defined(CONFIG_MPC823) + cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]); +#endif + + WATCHDOG_RESET(); + + /* Set color map */ + for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) { + ushort colreg = bmp_logo_palette[i]; +#ifdef CFG_INVERT_COLORS + *cmap++ = 0xffff - colreg; +#else + *cmap++ = colreg; +#endif + } + + WATCHDOG_RESET(); + + for (i=0; iim_cpm); +#endif + + if (!((bmp->header.signature[0]=='B') && + (bmp->header.signature[1]=='M'))) { + printf ("Error: no valid bmp image at %lx\n", bmp_image); + return 1; +} + + width = le32_to_cpu (bmp->header.width); + height = le32_to_cpu (bmp->header.height); + colors = 1<header.bit_count); + compression = le32_to_cpu (bmp->header.compression); + + bpix = NBITS(panel_info.vl_bpix); + + if ((bpix != 1) && (bpix != 8)) { + printf ("Error: %d bit/pixel mode not supported by U-Boot\n", + bpix); + return 1; + } + + if (bpix != le16_to_cpu(bmp->header.bit_count)) { + printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n", + bpix, + le16_to_cpu(bmp->header.bit_count)); + return 1; + } + + debug ("Display-bmp: %d x %d with %d colors\n", + (int)width, (int)height, (int)colors); + + if (bpix==8) { +#if defined(CONFIG_PXA250) + cmap = (ushort *)fbi->palette; +#elif defined(CONFIG_MPC823) + cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); +#endif + + /* Set color map */ + for (i=0; icolor_table[i]; + ushort colreg = + ( ((cte.red) << 8) & 0xf800) | + ( ((cte.green) << 4) & 0x07e0) | + ( (cte.blue) & 0x001f) ; + +#ifdef CFG_INVERT_COLORS + *cmap++ = 0xffff - colreg; +#else + *cmap++ = colreg; +#endif + } + } + + padded_line = (width&0x3) ? ((width&~0x3)+4) : (width); + if ((x + width)>panel_info.vl_col) + width = panel_info.vl_col - x; + if ((y + height)>panel_info.vl_row) + height = panel_info.vl_row - y; + + bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset); + fb = (uchar *) (lcd_base + + (y + height - 1) * lcd_line_length + x); + for (i = 0; i < height; ++i) { + for (j = 0; j < width ; j++) +#if defined(CONFIG_PXA250) + *(fb++)=*(bmap++); +#elif defined(CONFIG_MPC823) + *(fb++)=255-*(bmap++); +#endif + bmap += (width - padded_line); + fb -= (width + lcd_line_length); + } + + return (0); +} +#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */ + + +static void *lcd_logo (void) +{ +#ifdef LCD_INFO + DECLARE_GLOBAL_DATA_PTR; + + char info[80]; + char temp[32]; +#endif /* LCD_INFO */ + +#ifdef CONFIG_SPLASH_SCREEN + char *s; + ulong addr; + static int do_splash = 1; + + if (do_splash && (s = getenv("splashimage")) != NULL) { + addr = simple_strtoul(s, NULL, 16); + do_splash = 0; + + if (lcd_display_bitmap (addr, 0, 0) == 0) { + return ((void *)lcd_base); + } + } +#endif /* CONFIG_SPLASH_SCREEN */ + +#ifdef CONFIG_LCD_LOGO + bitmap_plot (0, 0); +#endif /* CONFIG_LCD_LOGO */ + +#ifdef CONFIG_MPC823 +#ifdef LCD_INFO + sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, info, strlen(info)); + + sprintf (info, "(C) 2004 DENX Software Engineering"); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT, + info, strlen(info)); + + sprintf (info, " Wolfgang DENK, wd@denx.de"); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2, + info, strlen(info)); +#ifdef LCD_INFO_BELOW_LOGO + sprintf (info, "MPC823 CPU at %s MHz", + strmhz(temp, gd->cpu_clk)); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, + info, strlen(info)); + sprintf (info, " %ld MB RAM, %ld MB Flash", + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, + info, strlen(info)); +#else + /* leave one blank line */ + + sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash", + strmhz(temp, gd->cpu_clk), + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, + info, strlen(info)); + +#endif /* CONFIG_MPC823 */ +#endif /* LCD_INFO_BELOW_LOGO */ +#endif /* LCD_INFO */ + +#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) + return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length)); +#else + return ((void *)lcd_base); +#endif /* CONFIG_LCD_LOGO */ +} + +/************************************************************************/ +/************************************************************************/ + +#endif /* CONFIG_LCD */ diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c index cce0cc2b86..cc58676868 100644 --- a/cpu/mpc8xx/lcd.c +++ b/cpu/mpc8xx/lcd.c @@ -54,74 +54,6 @@ #undef LCD_INFO #endif -/* #define LCD_TEST_PATTERN */ /* color backgnd for frame/color adjust */ -/* #define CFG_INVERT_COLORS */ /* Not needed - adjust vl_dp instead */ -/************************************************************************/ - -/************************************************************************/ -/* ** BITMAP DISPLAY SUPPORT -- should probably be moved elsewhere */ -/************************************************************************/ - -#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) -#include -#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */ - -/************************************************************************/ -/* ** FONT AND LOGO DATA */ -/************************************************************************/ - -#include /* Get font data, width and height */ - -#ifdef CONFIG_LCD_LOGO -# include /* Get logo data, width and height */ -#endif - -/************************************************************************/ -/************************************************************************/ - -/* - * Information about displays we are using. This is for configuring - * the LCD controller and memory allocation. Someone has to know what - * is connected, as we can't autodetect anything. - */ -#define CFG_HIGH 0 /* Pins are active high */ -#define CFG_LOW 1 /* Pins are active low */ - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register. - */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet. - */ - ushort vl_wbl; /* Wait between lines */ - - /* Vertical control register. - */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_lcdac; /* LCD AC timing */ - u_char vl_wbf; /* Wait between frames */ -} vidinfo_t; - -#define LCD_MONOCHROME 0 -#define LCD_COLOR2 1 -#define LCD_COLOR4 2 -#define LCD_COLOR8 3 - /*----------------------------------------------------------------------*/ #ifdef CONFIG_KYOCERA_KCS057QV1AJ /* @@ -129,7 +61,7 @@ typedef struct vidinfo { */ #define LCD_BPP LCD_COLOR4 -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, LCD_BPP, 1, 0, 1, 0, 5, 0, 0, 0 /* wbl, vpw, lcdac, wbf */ @@ -142,7 +74,7 @@ static vidinfo_t panel_info = { /* * Hitachi SP19X001-. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 154, 116, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0 /* wbl, vpw, lcdac, wbf */ @@ -155,7 +87,7 @@ static vidinfo_t panel_info = { /* * NEC NL6448AC33-18. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 144, 2, 0, 33 /* wbl, vpw, lcdac, wbf */ @@ -167,7 +99,7 @@ static vidinfo_t panel_info = { /* * NEC NL6448BC20-08. 6.5", 640x480. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 144, 2, 0, 33 /* wbl, vpw, lcdac, wbf */ @@ -179,7 +111,7 @@ static vidinfo_t panel_info = { /* * NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 212, 158, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 144, 2, 0, 33 /* wbl, vpw, lcdac, wbf */ @@ -191,7 +123,7 @@ static vidinfo_t panel_info = { /* * SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_LOW, 3, 0, 0, 1, 1, 25, 1, 0, 33 /* wbl, vpw, lcdac, wbf */ @@ -204,7 +136,7 @@ static vidinfo_t panel_info = { * Sharp 320x240. Active, color, single scan. It isn't 16x9, and I am * not sure what it is....... */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, 3, 0, 0, 1, 1, 15, 4, 0, 3 }; @@ -215,9 +147,10 @@ static vidinfo_t panel_info = { /* * Sharp LQ057Q3DC02 display. Active, color, single scan. */ +#undef LCD_DF #define LCD_DF 12 -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 15, 4, 0, 3 /* wbl, vpw, lcdac, wbf */ @@ -230,7 +163,7 @@ static vidinfo_t panel_info = { /* * Sharp LQ64D341 display, 640x480. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 128, 16, 0, 32 /* wbl, vpw, lcdac, wbf */ @@ -241,7 +174,7 @@ static vidinfo_t panel_info = { /* * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 400, 240, 143, 79, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, 3, 0, 0, 1, 1, 248, 4, 0, 35 /* wbl, vpw, lcdac, wbf */ @@ -253,7 +186,7 @@ static vidinfo_t panel_info = { /* * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 171, 129, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_LOW, 3, 0, 0, 1, 1, 160, 3, 0, 48 /* wbl, vpw, lcdac, wbf */ @@ -266,7 +199,7 @@ static vidinfo_t panel_info = { /* * HLD1045 display, 640x480. Active, color, single scan. */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 160, 3, 0, 48 /* wbl, vpw, lcdac, wbf */ @@ -278,7 +211,7 @@ static vidinfo_t panel_info = { /* * Prime View V16C6448AC */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 640, 480, 130, 98, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH, 3, 0, 0, 1, 1, 144, 2, 0, 35 /* wbl, vpw, lcdac, wbf */ @@ -300,7 +233,7 @@ static vidinfo_t panel_info = { #define OPTREX_BPP 0 /* 0 - monochrome, 1 bpp */ /* 1 - 4 grey levels, 2 bpp */ /* 2 - 16 grey levels, 4 bpp */ -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_LOW, OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4 }; @@ -314,525 +247,64 @@ static vidinfo_t panel_info = { #define LCD_BPP LCD_MONOCHROME #define LCD_DF 10 -static vidinfo_t panel_info = { +vidinfo_t panel_info = { 320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_LOW, LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0 }; #endif /*----------------------------------------------------------------------*/ -#if defined(LCD_INFO_BELOW_LOGO) -# define LCD_INFO_X 0 -# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) -#elif defined(CONFIG_LCD_LOGO) -# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) -# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) -#else -# define LCD_INFO_X (VIDEO_FONT_WIDTH) -# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) -#endif - -#ifndef LCD_BPP -#define LCD_BPP LCD_COLOR8 -#endif -#ifndef LCD_DF -#define LCD_DF 1 -#endif -#define NBITS(bit_code) (1 << (bit_code)) -#define NCOLORS(bit_code) (1 << NBITS(bit_code)) +int lcd_line_length; -static int lcd_line_length; - -static int lcd_color_fg; -static int lcd_color_bg; - -char lcd_is_enabled = 0; /* Indicate that LCD is enabled */ +int lcd_color_fg; +int lcd_color_bg; /* * Frame buffer memory information */ -static void *lcd_base; /* Start of framebuffer memory */ -static void *lcd_console_address; /* Start of console buffer */ - - -/************************************************************************/ -/* ** CONSOLE CONSTANTS */ -/************************************************************************/ - -#if LCD_BPP == LCD_MONOCHROME - -/* - * Simple color definitions - */ -#define CONSOLE_COLOR_BLACK 0 -#define CONSOLE_COLOR_WHITE 1 /* Must remain last / highest */ - -#else - -/* - * Simple color definitions - */ -#define CONSOLE_COLOR_BLACK 0 -#define CONSOLE_COLOR_RED 1 -#define CONSOLE_COLOR_GREEN 2 -#define CONSOLE_COLOR_YELLOW 3 -#define CONSOLE_COLOR_BLUE 4 -#define CONSOLE_COLOR_MAGENTA 5 -#define CONSOLE_COLOR_CYAN 6 -#define CONSOLE_COLOR_GREY 14 -#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - -#endif - -#if defined(CONFIG_LCD_LOGO) && (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) -#error Default Color Map overlaps with Logo Color Map -#endif - -/************************************************************************/ - -#ifndef PAGE_SIZE -#define PAGE_SIZE 4096 -#endif - - -/************************************************************************/ -/* ** CONSOLE DEFINITIONS & FUNCTIONS */ -/************************************************************************/ - -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) -#define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \ - / VIDEO_FONT_HEIGHT) -#else -#define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT) -#endif -#define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH) -#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length) -#define CONSOLE_ROW_FIRST (lcd_console_address) -#define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE) -#define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \ - - CONSOLE_ROW_SIZE) -#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS) -#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE) - -#if LCD_BPP == LCD_MONOCHROME -#define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ - (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) -#elif LCD_BPP == LCD_COLOR8 -#define COLOR_MASK(c) (c) -#else -#error Unsupported LCD BPP. -#endif +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ -static short console_col; -static short console_row; +short console_col; +short console_row; /************************************************************************/ -ulong lcd_setmem (ulong addr); - -static void lcd_drawchars (ushort x, ushort y, uchar *str, int count); -static inline void lcd_puts_xy (ushort x, ushort y, uchar *s); -static inline void lcd_putc_xy (ushort x, ushort y, uchar c); - -static int lcd_init (void *lcdbase); - -static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -static void lcd_ctrl_init (void *lcdbase); -static void lcd_enable (void); -static void *lcd_logo (void); +void lcd_ctrl_init (void *lcdbase); +void lcd_enable (void); #if LCD_BPP == LCD_COLOR8 -static void lcd_setcolreg (ushort regno, +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); #endif #if LCD_BPP == LCD_MONOCHROME -static void lcd_initcolregs (void); +void lcd_initcolregs (void); #endif -static int lcd_getbgcolor (void); -static void lcd_setfgcolor (int color); -static void lcd_setbgcolor (int color); #if defined(CONFIG_RBC823) -void lcd_disable (void); +void lcd_disable (void); #endif -#ifdef NOT_USED_SO_FAR -static void lcd_getcolreg (ushort regno, - ushort *red, ushort *green, ushort *blue); -static int lcd_getfgcolor (void); -#endif /* NOT_USED_SO_FAR */ - -/************************************************************************/ - -/*----------------------------------------------------------------------*/ - -static void console_scrollup (void) -{ -#if 1 - /* Copy up rows ignoring the first one */ - memcpy (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE); - - /* Clear the last one */ - memset (CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE); -#else - /* - * Poor attempt to optimize speed by moving "long"s. - * But the code is ugly, and not a bit faster :-( - */ - ulong *t = (ulong *)CONSOLE_ROW_FIRST; - ulong *s = (ulong *)CONSOLE_ROW_SECOND; - ulong l = CONSOLE_SCROLL_SIZE / sizeof(ulong); - uchar c = lcd_color_bg & 0xFF; - ulong val= (c<<24) | (c<<16) | (c<<8) | c; - - while (l--) - *t++ = *s++; - - t = (ulong *)CONSOLE_ROW_LAST; - l = CONSOLE_ROW_SIZE / sizeof(ulong); - - while (l-- > 0) - *t++ = val; -#endif -} - -/*----------------------------------------------------------------------*/ - -static inline void console_back (void) -{ - if (--console_col < 0) { - console_col = CONSOLE_COLS-1 ; - if (--console_row < 0) { - console_row = 0; - } - } - - lcd_putc_xy (console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, - ' '); -} - -/*----------------------------------------------------------------------*/ - -static inline void console_newline (void) -{ - ++console_row; - console_col = 0; - - /* Check if we need to scroll the terminal */ - if (console_row >= CONSOLE_ROWS) { - /* Scroll everything up */ - console_scrollup () ; - --console_row; - } -} - -/*----------------------------------------------------------------------*/ - -void lcd_putc (const char c) -{ - if (!lcd_is_enabled) { - serial_putc(c); - return; - } - - switch (c) { - case '\r': console_col = 0; - return; - - case '\n': console_newline(); - return; - - case '\t': /* Tab (8 chars alignment) */ - console_col |= 8; - console_col &= ~7; - - if (console_col >= CONSOLE_COLS) { - console_newline(); - } - return; - - case '\b': console_back(); - return; - - default: lcd_putc_xy (console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, - c); - if (++console_col >= CONSOLE_COLS) { - console_newline(); - } - return; - } - /* NOTREACHED */ -} - -/*----------------------------------------------------------------------*/ - -void lcd_puts (const char *s) -{ - if (!lcd_is_enabled) { - serial_puts (s); - return; - } - - while (*s) { - lcd_putc (*s++); - } -} - -/************************************************************************/ -/* ** Low-Level Graphics Routines */ -/************************************************************************/ - -static void lcd_drawchars (ushort x, ushort y, uchar *str, int count) -{ - uchar *dest; - ushort off, row; - - dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8); - off = x * (1 << LCD_BPP) % 8; - - for (row=0; row < VIDEO_FONT_HEIGHT; ++row, dest += lcd_line_length) { - uchar *s = str; - uchar *d = dest; - int i; - -#if LCD_BPP == LCD_MONOCHROME - uchar rest = *d & -(1 << (8-off)); - uchar sym; -#endif - for (i=0; i> off); - rest = sym << (8-off); -#elif LCD_BPP == LCD_COLOR8 - for (c=0; c<8; ++c) { - *d++ = (bits & 0x80) ? - lcd_color_fg : lcd_color_bg; - bits <<= 1; - } -#endif - } - -#if LCD_BPP == LCD_MONOCHROME - *d = rest | (*d & ((1 << (8-off)) - 1)); -#endif - } -} - -/*----------------------------------------------------------------------*/ - -static inline void lcd_puts_xy (ushort x, ushort y, uchar *s) -{ -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) - lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s)); -#else - lcd_drawchars (x, y, s, strlen (s)); -#endif -} - -/*----------------------------------------------------------------------*/ - -static inline void lcd_putc_xy (ushort x, ushort y, uchar c) -{ -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) - lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1); -#else - lcd_drawchars (x, y, &c, 1); -#endif -} - /************************************************************************/ -/** Small utility to check that you got the colours right */ -/************************************************************************/ -#ifdef LCD_TEST_PATTERN - -#define N_BLK_VERT 2 -#define N_BLK_HOR 3 - -static int test_colors[N_BLK_HOR*N_BLK_VERT] = { - CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW, - CONSOLE_COLOR_BLUE, CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN, -}; - -static void test_pattern (void) -{ - ushort v_max = panel_info.vl_row; - ushort h_max = panel_info.vl_col; - ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT; - ushort h_step = (h_max + N_BLK_HOR - 1) / N_BLK_HOR; - ushort v, h; - uchar *pix = (uchar *)lcd_base; - - printf ("[LCD] Test Pattern: %d x %d [%d x %d]\n", - h_max, v_max, h_step, v_step); - - /* WARNING: Code silently assumes 8bit/pixel */ - for (v=0; vfb_base); - - lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; - - lcd_init (lcd_base); /* LCD initialization */ - - /* Device initialization */ - memset (&lcddev, 0, sizeof (lcddev)); - - strcpy (lcddev.name, "lcd"); - lcddev.ext = 0; /* No extensions */ - lcddev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - lcddev.putc = lcd_putc; /* 'putc' function */ - lcddev.puts = lcd_puts; /* 'puts' function */ - - rc = device_register (&lcddev); - - return (rc == 0) ? 1 : rc; -} - -/*----------------------------------------------------------------------*/ - -static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ -#if LCD_BPP == LCD_MONOCHROME - /* Setting the palette */ - lcd_initcolregs(); - -#elif LCD_BPP == LCD_COLOR8 - /* Setting the palette */ - lcd_setcolreg (CONSOLE_COLOR_BLACK, 0, 0, 0); - lcd_setcolreg (CONSOLE_COLOR_RED, 0xFF, 0, 0); - lcd_setcolreg (CONSOLE_COLOR_GREEN, 0, 0xFF, 0); - lcd_setcolreg (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0); - lcd_setcolreg (CONSOLE_COLOR_BLUE, 0, 0, 0xFF); - lcd_setcolreg (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF); - lcd_setcolreg (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF); - lcd_setcolreg (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA); - lcd_setcolreg (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF); -#endif - -#ifndef CFG_WHITE_ON_BLACK - lcd_setfgcolor (CONSOLE_COLOR_BLACK); - lcd_setbgcolor (CONSOLE_COLOR_WHITE); -#else - lcd_setfgcolor (CONSOLE_COLOR_WHITE); - lcd_setbgcolor (CONSOLE_COLOR_BLACK); -#endif /* CFG_WHITE_ON_BLACK */ - -#ifdef LCD_TEST_PATTERN - test_pattern(); -#else - /* set framebuffer to background color */ - memset ((char *)lcd_base, - COLOR_MASK(lcd_getbgcolor()), - lcd_line_length*panel_info.vl_row); -#endif - /* Paint the logo and retrieve LCD base address */ - debug ("[LCD] Drawing the logo...\n"); - lcd_console_address = lcd_logo (); - - console_col = 0; - console_row = 0; - - return (0); -} - -U_BOOT_CMD( - cls, 1, 1, lcd_clear, - "cls - clear screen\n", - NULL -); - -/*----------------------------------------------------------------------*/ - -static int lcd_init (void *lcdbase) -{ - /* Initialize the lcd controller */ - debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase); - - lcd_ctrl_init (lcdbase); - lcd_clear (NULL, 1, 1, NULL); /* dummy args */ - lcd_enable (); - - /* Initialize the console */ - console_col = 0; -#ifdef LCD_INFO_BELOW_LOGO - console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT; -#else - console_row = 1; /* leave 1 blank line below logo */ -#endif - lcd_is_enabled = 1; - - return 0; -} - /************************************************************************/ -/* ** ROM capable initialization part - needed to reserve FB memory */ +/* ----------------- chipset specific functions ----------------------- */ /************************************************************************/ /* - * This is called early in the system initialization to grab memory - * for the LCD controller. - * Returns new address for monitor, after reserving LCD buffer memory - * - * Note that this is running from ROM, so no write access to global data. + * Calculate fb size for VIDEOLFB_ATAG. */ -ulong lcd_setmem (ulong addr) +ulong calc_fbsize (void) { ulong size; int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; - debug ("LCD panel info: %d x %d, %d bit/pix\n", - panel_info.vl_col, panel_info.vl_row, NBITS (panel_info.vl_bpix) ); - size = line_length * panel_info.vl_row; - /* Round up to nearest full page */ - size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - - /* Allocate pages for the frame buffer. */ - addr -= size; - - debug ("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr); - - return (addr); + return size; } - -/************************************************************************/ -/* ----------------- chipset specific functions ----------------------- */ -/************************************************************************/ - -static void lcd_ctrl_init (void *lcdbase) +void lcd_ctrl_init (void *lcdbase) { volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile lcd823_t *lcdp = &immr->im_lcd; @@ -983,7 +455,7 @@ lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue) /*----------------------------------------------------------------------*/ #if LCD_BPP == LCD_COLOR8 -static void +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) { volatile immap_t *immr = (immap_t *) CFG_IMMR; @@ -1026,37 +498,7 @@ void lcd_initcolregs (void) /*----------------------------------------------------------------------*/ -static void lcd_setfgcolor (int color) -{ - lcd_color_fg = color & 0x0F; -} - -/*----------------------------------------------------------------------*/ - -static void lcd_setbgcolor (int color) -{ - lcd_color_bg = color & 0x0F; -} - -/*----------------------------------------------------------------------*/ - -#ifdef NOT_USED_SO_FAR -static int lcd_getfgcolor (void) -{ - return lcd_color_fg; -} -#endif /* NOT_USED_SO_FAR */ - -/*----------------------------------------------------------------------*/ - -static int lcd_getbgcolor (void) -{ - return lcd_color_bg; -} - -/*----------------------------------------------------------------------*/ - -static void lcd_enable (void) +void lcd_enable (void) { volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile lcd823_t *lcdp = &immr->im_lcd; @@ -1173,224 +615,6 @@ void lcd_disable (void) #endif /* NOT_USED_SO_FAR || CONFIG_RBC823 */ -/************************************************************************/ -/* ** Chipset depending Bitmap / Logo stuff... */ -/************************************************************************/ - - -#ifdef CONFIG_LCD_LOGO -static void bitmap_plot (int x, int y) -{ - volatile immap_t *immr = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cp = &(immr->im_cpm); - ushort *cmap; - ushort i; - uchar *bmap; - uchar *fb; - - debug ("Logo: width %d height %d colors %d cmap %d\n", - BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, - sizeof(bmp_logo_palette)/(sizeof(ushort)) - ); - - /* Leave room for default color map */ - cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]); - - WATCHDOG_RESET(); - - /* Set color map */ - for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) { - ushort colreg = bmp_logo_palette[i]; -#ifdef CFG_INVERT_COLORS - colreg ^= 0xFFF; -#endif - *cmap++ = colreg; - } - - bmap = &bmp_logo_bitmap[0]; - fb = (char *)(lcd_base + y * lcd_line_length + x); - - WATCHDOG_RESET(); - - for (i=0; iim_cpm); - ushort *cmap; - ushort i, j; - uchar *fb; - bmp_image_t *bmp=(bmp_image_t *)bmp_image; - uchar *bmap; - ushort padded_line; - unsigned long width, height; - unsigned colors,bpix; - unsigned long compression; - - WATCHDOG_RESET(); - - if (!((bmp->header.signature[0]=='B') && - (bmp->header.signature[1]=='M'))) { - printf ("Error: no valid bmp image at %lx\n", bmp_image); - return 1; - } - - width = le32_to_cpu (bmp->header.width); - height = le32_to_cpu (bmp->header.height); - colors = 1<header.bit_count); - compression = le32_to_cpu (bmp->header.compression); - - bpix = NBITS(panel_info.vl_bpix); - - if ((bpix != 1) && (bpix != 8)) { - printf ("Error: %d bit/pixel mode not supported by U-Boot\n", - bpix); - return 1; - } - - if (bpix != le16_to_cpu(bmp->header.bit_count)) { - printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n", - bpix, - le16_to_cpu(bmp->header.bit_count)); - return 1; - } - - if (compression!=BMP_BI_RGB) { - printf ("Error: compression type %ld not supported\n", - compression); - return 1; - } - - debug ("Display-bmp: %d x %d with %d colors\n", - width, height, colors); - - if (bpix==8) { - /* Fill the entire color map */ - cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); - - /* Set color map */ - for (i = 0; i < colors; ++i) { - bmp_color_table_entry_t cte = bmp->color_table[i]; - ushort colreg = - ((cte.red>>4) << 8) | - ((cte.green>>4) << 4) | - (cte.blue>>4) ; -#ifdef CFG_INVERT_COLORS - colreg ^= 0xFFF; -#endif - *cmap-- = colreg; - } - - WATCHDOG_RESET(); - } - - padded_line = (width&0x3) ? ((width&~0x3)+4) : (width); - if ((x + width)>panel_info.vl_col) - width = panel_info.vl_col - x; - if ((y + height)>panel_info.vl_row) - height = panel_info.vl_row - y; - - bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset); - fb = (uchar *) (lcd_base + - (y + height - 1) * lcd_line_length + x); - for (i = 0; i < height; ++i) { - WATCHDOG_RESET(); - for (j = 0; j < width ; j++) - *(fb++)=255-*(bmap++); - bmap += (width - padded_line); - fb -= (width + lcd_line_length); - } - - return (0); -} -#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */ - -/*----------------------------------------------------------------------*/ - -static void *lcd_logo (void) -{ -#ifdef LCD_INFO - DECLARE_GLOBAL_DATA_PTR; - - char info[80]; - char temp[32]; -#endif /* LCD_INFO */ - -#ifdef CONFIG_SPLASH_SCREEN - char *s; - ulong addr; - static int do_splash = 1; - - if (do_splash && (s = getenv("splashimage")) != NULL) { - addr = simple_strtoul(s, NULL, 16); - do_splash = 0; - - if (lcd_display_bitmap (addr, 0, 0) == 0) { - return ((void *)lcd_base); - } - } -#endif /* CONFIG_SPLASH_SCREEN */ - -#ifdef CONFIG_LCD_LOGO - bitmap_plot (0, 0); -#endif /* CONFIG_LCD_LOGO */ - - -#ifdef LCD_INFO - sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, info, strlen(info)); - - sprintf (info, "(C) 2004 DENX Software Engineering"); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT, - info, strlen(info)); - - sprintf (info, " Wolfgang DENK, wd@denx.de"); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2, - info, strlen(info)); -#ifdef LCD_INFO_BELOW_LOGO - sprintf (info, "MPC823 CPU at %s MHz", - strmhz(temp, gd->cpu_clk)); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, - info, strlen(info)); - sprintf (info, " %ld MB RAM, %ld MB Flash", - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, - info, strlen(info)); -#else - /* leave one blank line */ - - sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash", - strmhz(temp, gd->cpu_clk), - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, - info, strlen(info)); -#endif /* LCD_INFO_BELOW_LOGO */ -#endif /* LCD_INFO */ - -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) - return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length)); -#else - return ((void *)lcd_base); -#endif /* CONFIG_LCD_LOGO */ -} - -/************************************************************************/ /************************************************************************/ #endif /* CONFIG_LCD */ diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c index ef60d4a84b..b2caa73c6c 100644 --- a/cpu/pxa/pxafb.c +++ b/cpu/pxa/pxafb.c @@ -1,4 +1,6 @@ /* + * PXA LCD Controller + * * (C) Copyright 2001-2002 * Wolfgang Denk, DENX Software Engineering -- wd@denx.de * @@ -25,701 +27,163 @@ /* ** HEADER FILES */ /************************************************************************/ -#define DEBUG 1 #include #include #include #include -#include #include #include +#include #include -#ifdef CONFIG_LCD - -/************************************************************************/ -/* ** CONFIG STUFF -- should be moved to board config file */ -/************************************************************************/ -#ifndef CONFIG_EDT32F10 -#define CONFIG_LCD_LOGO -#define LCD_INFO /* Display Logo, (C) and system info */ -#endif - -#ifdef CONFIG_V37 -#undef CONFIG_LCD_LOGO -#undef LCD_INFO -#endif - -#undef CONFIG_LCD_LOGO +/* #define DEBUG */ -#define LCD_TEST_PATTERN -/* #define LCD_TEST_PATTERN */ /* color backgnd for frame/color adjust */ -/* #define CFG_INVERT_COLORS */ /* Not needed - adjust vl_dp instead */ -/************************************************************************/ - -/************************************************************************/ -/* ** FONT AND LOGO DATA */ -/************************************************************************/ - -#include /* Get font data, width and height */ - -#ifdef CONFIG_LCD_LOGO -# include /* Get logo data, width and height */ -#endif - -/************************************************************************/ -/************************************************************************/ - -/* - * Information about displays we are using. This is for configuring - * the LCD controller and memory allocation. Someone has to know what - * is connected, as we can't autodetect anything. - */ -#define CFG_HIGH 0 /* Pins are active high */ -#define CFG_LOW 1 /* Pins are active low */ - -/* PXA LCD DMA descriptor */ -struct pxafb_dma_descriptor { - u_long fdadr; - u_long fsadr; - u_long fidr; - u_long ldcmd; -}; - -/* PXA LCD info */ -struct pxafb_info { - - /* Misc registers */ - u_long reg_lccr3; - u_long reg_lccr2; - u_long reg_lccr1; - u_long reg_lccr0; - u_long fdadr0; - u_long fdadr1; - - /* DMA descriptors */ - struct pxafb_dma_descriptor * dmadesc_fblow; - struct pxafb_dma_descriptor * dmadesc_fbhigh; - struct pxafb_dma_descriptor * dmadesc_palette; - - u_long screen; /* physical address of frame buffer */ - u_long palette; /* physical address of palette memory */ - u_int palette_size; -}; - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register. - */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet. - */ - ushort vl_hpw; /* Horz sync pulse width */ - u_char vl_blw; /* Wait before of line */ - u_char vl_elw; /* Wait end of line */ - - /* Vertical control register. - */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_bfw; /* Wait before of frame */ - u_char vl_efw; /* Wait end of frame */ - - u_char vl_lcdac; /* LCD AC timing */ - - /* PXA LCD controller params - */ - struct pxafb_info pxa; - -} vidinfo_t; - -#define LCD_MONOCHROME 0 -#define LCD_COLOR2 1 -#define LCD_COLOR4 2 -#define LCD_COLOR8 3 -#define LCD_COLOR16 4 +#ifdef CONFIG_LCD /*----------------------------------------------------------------------*/ -#define CONFIG_PXA_VGA -#ifdef CONFIG_PXA_VGA /* - * LCD outputs connected to a video DAC + * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for + * your display. */ -#define LCD_BPP LCD_COLOR8 +#ifdef CONFIG_PXA_VGA +/* LCD outputs connected to a video DAC */ +# define LCD_BPP LCD_COLOR8 /* you have to set lccr0 and lccr3 (including pcd) */ -#define REG_LCCR0 0x003008f8 -#define REG_LCCR3 0x0300FF01 +# define REG_LCCR0 0x003008f8 +# define REG_LCCR3 0x0300FF01 /* 640x480x16 @ 61 Hz */ -static vidinfo_t panel_info = { - vl_col: 640, - vl_row: 480, - vl_width: 640, - vl_height: 480, - vl_clkp: CFG_HIGH, - vl_oep: CFG_HIGH, - vl_hsp: CFG_HIGH, - vl_vsp: CFG_HIGH, - vl_dp: CFG_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 0, - vl_splt: 0, - vl_clor: 0, - vl_lcdac: 0, - vl_tft: 1, - vl_hpw: 40, - vl_blw: 56, - vl_elw: 56, - vl_vpw: 20, - vl_bfw: 8, - vl_efw: 8, +vidinfo_t panel_info = { + vl_col: 640, + vl_row: 480, + vl_width: 640, + vl_height: 480, + vl_clkp: CFG_HIGH, + vl_oep: CFG_HIGH, + vl_hsp: CFG_HIGH, + vl_vsp: CFG_HIGH, + vl_dp: CFG_HIGH, + vl_bpix: LCD_BPP, + vl_lbw: 0, + vl_splt: 0, + vl_clor: 0, + vl_tft: 1, + vl_hpw: 40, + vl_blw: 56, + vl_elw: 56, + vl_vpw: 20, + vl_bfw: 8, + vl_efw: 8, }; #endif /* CONFIG_PXA_VIDEO */ +/*----------------------------------------------------------------------*/ #ifdef CONFIG_SHARP_LM8V31 -#define LCD_BPP LCD_COLOR8 -#define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */ +# define LCD_BPP LCD_COLOR8 +# define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */ /* you have to set lccr0 and lccr3 (including pcd) */ -#define REG_LCCR0 0x0030087C -#define REG_LCCR3 0x0340FF08 - -static vidinfo_t panel_info = { - vl_col: 640, - vl_row: 480, - vl_width: 157, - vl_height: 118, - vl_clkp: CFG_HIGH, - vl_oep: CFG_HIGH, - vl_hsp: CFG_HIGH, - vl_vsp: CFG_HIGH, - vl_dp: CFG_HIGH, - vl_bpix: LCD_BPP, - vl_lbw: 0, - vl_splt: 1, - vl_clor: 1, - vl_lcdac: 0, - vl_tft: 0, - vl_hpw: 1, - vl_blw: 3, - vl_elw: 3, - vl_vpw: 1, - vl_bfw: 0, - vl_efw: 0, +# define REG_LCCR0 0x0030087C +# define REG_LCCR3 0x0340FF08 + +vidinfo_t panel_info = { + vl_col: 640, + vl_row: 480, + vl_width: 157, + vl_height: 118, + vl_clkp: CFG_HIGH, + vl_oep: CFG_HIGH, + vl_hsp: CFG_HIGH, + vl_vsp: CFG_HIGH, + vl_dp: CFG_HIGH, + vl_bpix: LCD_BPP, + vl_lbw: 0, + vl_splt: 1, + vl_clor: 1, + vl_tft: 0, + vl_hpw: 1, + vl_blw: 3, + vl_elw: 3, + vl_vpw: 1, + vl_bfw: 0, + vl_efw: 0, }; #endif /* CONFIG_SHARP_LM8V31 */ /*----------------------------------------------------------------------*/ +#ifdef CONFIG_HITACHI_SX14 +/* Hitachi SX14Q004-ZZA color STN LCD */ +#define LCD_BPP LCD_COLOR8 -/*----------------------------------------------------------------------*/ - -#if defined(LCD_INFO_BELOW_LOGO) -# define LCD_INFO_X 0 -# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) -#elif defined(CONFIG_LCD_LOGO) -# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) -# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) -#else -# define LCD_INFO_X (VIDEO_FONT_WIDTH) -# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) -#endif - -#ifndef LCD_BPP -#define LCD_BPP LCD_COLOR8 -#endif -#ifndef LCD_DF -#define LCD_DF 1 -#endif - -#define NBITS(bit_code) (1 << (bit_code)) -#define NCOLORS(bit_code) (1 << NBITS(bit_code)) - -static int lcd_line_length; - -static int lcd_color_fg; -static int lcd_color_bg; - -static char lcd_is_enabled = 0; /* Indicate that LCD is enabled */ - -/* - * Frame buffer memory information - */ -static void *lcd_base; /* Start of framebuffer memory */ -static void *lcd_console_address; /* Start of console buffer */ - - -/************************************************************************/ -/* ** CONSOLE CONSTANTS */ -/************************************************************************/ - -#if LCD_BPP == LCD_MONOCHROME - -/* - * Simple color definitions - */ -#define CONSOLE_COLOR_BLACK 0 -#define CONSOLE_COLOR_WHITE 1 /* Must remain last / highest */ - -#elif LCD_BPP == LCD_COLOR8 - -/* - * Simple color definitions - */ -#define CONSOLE_COLOR_BLACK 0 -#define CONSOLE_COLOR_RED 1 -#define CONSOLE_COLOR_GREEN 2 -#define CONSOLE_COLOR_YELLOW 3 -#define CONSOLE_COLOR_BLUE 4 -#define CONSOLE_COLOR_MAGENTA 5 -#define CONSOLE_COLOR_CYAN 6 -#define CONSOLE_COLOR_GREY 14 -#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - -#else /* 16 bit */ - -#define CONSOLE_COLOR_BLACK 0x0000 -#define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ - -#endif - -#if defined(CONFIG_LCD_LOGO) && (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) -#error Default Color Map overlaps with Logo Color Map -#endif - -/************************************************************************/ - -#ifndef PAGE_SIZE -#define PAGE_SIZE 4096 -#endif - - -/************************************************************************/ -/* ** CONSOLE DEFINITIONS & FUNCTIONS */ -/************************************************************************/ - -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) -#define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \ - / VIDEO_FONT_HEIGHT) -#else -#define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT) -#endif -#define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH) -#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length) -#define CONSOLE_ROW_FIRST (lcd_console_address) -#define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE) -#define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \ - - CONSOLE_ROW_SIZE) -#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS) -#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE) - -#if LCD_BPP == LCD_MONOCHROME -#define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ - (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) -#elif LCD_BPP == LCD_COLOR8 -#define COLOR_MASK(c) (c) -#elif LCD_BPP == LCD_COLOR16 -#define COLOR_MASK(c) (c) -#else -#error Unsupported LCD BPP. -#endif - -static short console_col; -static short console_row; - -/************************************************************************/ - -ulong lcd_setmem (ulong addr); - -static void lcd_drawchars (ushort x, ushort y, uchar *str, int count); -static inline void lcd_puts_xy (ushort x, ushort y, uchar *s); -static inline void lcd_putc_xy (ushort x, ushort y, uchar c); - -static int lcd_init (void *lcdbase); -static void lcd_ctrl_init (void *lcdbase); -static void lcd_enable (void); -static void *lcd_logo (void); -#if LCD_BPP == LCD_COLOR8 -static void lcd_setcolreg (ushort regno, - ushort red, ushort green, ushort blue); -#endif -#if LCD_BPP == LCD_MONOCHROME -static void lcd_initcolregs (void); -#endif -static void lcd_setfgcolor (int color); -static void lcd_setbgcolor (int color); - -#ifdef NOT_USED_SO_FAR -static int lcd_getbgcolor (void); -static void lcd_disable (void); -static void lcd_getcolreg (ushort regno, - ushort *red, ushort *green, ushort *blue); -static int lcd_getfgcolor (void); -#endif /* NOT_USED_SO_FAR */ - - -static int pxafb_init_mem(void *lcdbase, vidinfo_t *vid); -static void pxafb_setup_gpio(vidinfo_t *vid); -static void pxafb_enable_controller(vidinfo_t *vid); -static int pxafb_init(vidinfo_t *vid); - -/************************************************************************/ - -/*----------------------------------------------------------------------*/ - -static void console_scrollup (void) -{ - /* Copy up rows ignoring the first one */ - memcpy (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE); - - /* Clear the last one */ - memset (CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE); -} - -/*----------------------------------------------------------------------*/ - -static inline void console_back (void) -{ - if (--console_col < 0) { - console_col = CONSOLE_COLS-1 ; - if (--console_row < 0) { - console_row = 0; - } - } - - lcd_putc_xy (console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, - ' '); -} - -/*----------------------------------------------------------------------*/ - -static inline void console_newline (void) -{ - ++console_row; - console_col = 0; - - /* Check if we need to scroll the terminal */ - if (console_row >= CONSOLE_ROWS) { - /* Scroll everything up */ - console_scrollup () ; - --console_row; - } -} - -/*----------------------------------------------------------------------*/ - -void lcd_putc (const char c) -{ - if (!lcd_is_enabled) { - serial_putc(c); - return; - } - - switch (c) { - case '\r': console_col = 0; - return; - - case '\n': console_newline(); - return; - - case '\t': /* Tab (8 chars alignment) */ - console_col |= 8; - console_col &= ~7; - - if (console_col >= CONSOLE_COLS) { - console_newline(); - } - return; - - case '\b': console_back(); - return; - - default: lcd_putc_xy (console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, - c); - if (++console_col >= CONSOLE_COLS) { - console_newline(); - } - return; - } - /* NOTREACHED */ -} - -/*----------------------------------------------------------------------*/ - -void lcd_puts (const char *s) -{ - if (!lcd_is_enabled) { - serial_puts (s); - return; - } - - while (*s) { - lcd_putc (*s++); - } -} - -/************************************************************************/ -/* ** Low-Level Graphics Routines */ -/************************************************************************/ - -static void lcd_drawchars (ushort x, ushort y, uchar *str, int count) -{ - uchar *dest; - ushort off, row; - - dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8); - off = x * (1 << LCD_BPP) % 8; - - for (row=0; row < VIDEO_FONT_HEIGHT; ++row, dest += lcd_line_length) { - uchar *s = str; - uchar *d = dest; - int i; - -#if LCD_BPP == LCD_MONOCHROME - uchar rest = *d & -(1 << (8-off)); - uchar sym; -#endif - for (i=0; i> off); - rest = sym << (8-off); -#elif LCD_BPP == LCD_COLOR8 - for (c=0; c<8; ++c) { - *d++ = (bits & 0x80) ? - lcd_color_fg : lcd_color_bg; - bits <<= 1; - } -#elif LCD_BPP == LCD_COLOR16 - for (c=0; c<16; ++c) { - *d++ = (bits & 0x80) ? - lcd_color_fg : lcd_color_bg; - bits <<= 1; - } -#endif - } - -#if LCD_BPP == LCD_MONOCHROME - *d = rest | (*d & ((1 << (8-off)) - 1)); -#endif - } -} - -/*----------------------------------------------------------------------*/ - -static inline void lcd_puts_xy (ushort x, ushort y, uchar *s) -{ -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) - lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s)); -#else - lcd_drawchars (x, y, s, strlen (s)); -#endif -} - -/*----------------------------------------------------------------------*/ - -static inline void lcd_putc_xy (ushort x, ushort y, uchar c) -{ -#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) - lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1); -#else - lcd_drawchars (x, y, &c, 1); -#endif -} - -/************************************************************************/ -/** Small utility to check that you got the colours right */ -/************************************************************************/ -#ifdef LCD_TEST_PATTERN - -#define N_BLK_VERT 2 -#define N_BLK_HOR 3 - -static int test_colors[N_BLK_HOR*N_BLK_VERT] = { - CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW, - CONSOLE_COLOR_BLUE, CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN, +/* you have to set lccr0 and lccr3 (including pcd) */ +#define REG_LCCR0 0x00301079 +#define REG_LCCR3 0x0340FF20 + +vidinfo_t panel_info = { + vl_col: 320, + vl_row: 240, + vl_width: 167, + vl_height: 109, + vl_clkp: CFG_HIGH, + vl_oep: CFG_HIGH, + vl_hsp: CFG_HIGH, + vl_vsp: CFG_HIGH, + vl_dp: CFG_HIGH, + vl_bpix: LCD_BPP, + vl_lbw: 1, + vl_splt: 0, + vl_clor: 1, + vl_tft: 0, + vl_hpw: 1, + vl_blw: 1, + vl_elw: 1, + vl_vpw: 7, + vl_bfw: 0, + vl_efw: 0, }; - -static void test_pattern (void) -{ - ushort v_max = panel_info.vl_row; - ushort h_max = panel_info.vl_col; - ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT; - ushort h_step = (h_max + N_BLK_HOR - 1) / N_BLK_HOR; - ushort v, h; - uchar *pix = (uchar *)lcd_base; - - printf ("[LCD] Test Pattern: %d x %d [%d x %d]\n", - h_max, v_max, h_step, v_step); - - /* WARNING: Code silently assumes 8bit/pixel */ - for (v=0; vfb_base); - - lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; - - lcd_init (lcd_base); /* LCD initialization */ - - /* Device initialization */ - memset (&lcddev, 0, sizeof (lcddev)); - - strcpy (lcddev.name, "lcd"); - lcddev.ext = 0; /* No extensions */ - lcddev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - lcddev.putc = lcd_putc; /* 'putc' function */ - lcddev.puts = lcd_puts; /* 'puts' function */ - - rc = device_register (&lcddev); - return (rc == 0) ? 1 : rc; -} +#endif /* CONFIG_HITACHI_SX14 */ /*----------------------------------------------------------------------*/ -static int lcd_init (void *lcdbase) -{ - /* Initialize the lcd controller */ - debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase); - - lcd_ctrl_init (lcdbase); - -#if LCD_BPP == LCD_MONOCHROME - /* Setting the palette */ - lcd_initcolregs(); - -#elif LCD_BPP == LCD_COLOR8 - /* Setting the palette */ - lcd_setcolreg (CONSOLE_COLOR_BLACK, 0, 0, 0); - lcd_setcolreg (CONSOLE_COLOR_RED, 0xFF, 0, 0); - lcd_setcolreg (CONSOLE_COLOR_GREEN, 0, 0xFF, 0); - lcd_setcolreg (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0); - lcd_setcolreg (CONSOLE_COLOR_BLUE, 0, 0, 0xFF); - lcd_setcolreg (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF); - lcd_setcolreg (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF); - lcd_setcolreg (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA); - lcd_setcolreg (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF); +#if LCD_BPP == LCD_COLOR8 +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); #endif - -#define CFG_WHITE_ON_BLACK -#ifndef CFG_WHITE_ON_BLACK - lcd_setfgcolor (CONSOLE_COLOR_BLACK); - lcd_setbgcolor (CONSOLE_COLOR_WHITE); -#else - lcd_setfgcolor (CONSOLE_COLOR_WHITE); - lcd_setbgcolor (CONSOLE_COLOR_BLACK); -#endif /* CFG_WHITE_ON_BLACK */ - -#ifdef LCD_TEST_PATTERN - test_pattern(); -#else - /* set framebuffer to background color */ - memset ((char *)lcd_base, - COLOR_MASK(lcd_getbgcolor()), - lcd_line_length*panel_info.vl_row); +#if LCD_BPP == LCD_MONOCHROME +void lcd_initcolregs (void); #endif - lcd_enable (); +#ifdef NOT_USED_SO_FAR +void lcd_disable (void); +void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue); +#endif /* NOT_USED_SO_FAR */ - /* Paint the logo and retrieve LCD base address */ - debug ("[LCD] Drawing the logo...\n"); - lcd_console_address = lcd_logo (); +void lcd_ctrl_init (void *lcdbase); +void lcd_enable (void); - /* Initialize the console */ - console_col = 0; -#ifdef LCD_INFO_BELOW_LOGO - console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT; -#else - console_row = 1; /* leave 1 blank line below logo */ -#endif - lcd_is_enabled = 1; +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; - return 0; -} +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ +short console_col; +short console_row; -/************************************************************************/ -/* ** ROM capable initialization part - needed to reserve FB memory */ +static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid); +static void pxafb_setup_gpio (vidinfo_t *vid); +static void pxafb_enable_controller (vidinfo_t *vid); +static int pxafb_init (vidinfo_t *vid); /************************************************************************/ -/* - * This is called early in the system initialization to grab memory - * for the LCD controller. - * Returns new address for monitor, after reserving LCD buffer memory - * - * Note that this is running from ROM, so no write access to global data. - */ -ulong lcd_setmem (ulong addr) -{ - ulong size; - int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; - - debug ("LCD panel info: %d x %d, %d bit/pix\n", - panel_info.vl_col, panel_info.vl_row, NBITS (panel_info.vl_bpix) ); - - /* extra page for dma descriptors and palette */ - size = line_length * panel_info.vl_row + PAGE_SIZE; - - /* Round up to nearest full page */ - size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - - /* Allocate pages for the frame buffer. */ - addr -= size; - - debug ("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr); - - return (addr); -} - - /************************************************************************/ -/* ----------------- chipset specific functions ----------------------- */ +/* --------------- PXA chipset specific functions ------------------- */ /************************************************************************/ -static void lcd_ctrl_init (void *lcdbase) +void lcd_ctrl_init (void *lcdbase) { pxafb_init_mem(lcdbase, &panel_info); pxafb_init(&panel_info); @@ -728,18 +192,16 @@ static void lcd_ctrl_init (void *lcdbase) } /*----------------------------------------------------------------------*/ - -#ifdef NOT_USED_SO_FAR -static void +#ifdef NOT_USED_SO_FAR +void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue) { } -#endif /* NOT_USED_SO_FAR */ +#endif /* NOT_USED_SO_FAR */ /*----------------------------------------------------------------------*/ - #if LCD_BPP == LCD_COLOR8 -static void +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) { struct pxafb_info *fbi = &panel_info.pxa; @@ -754,7 +216,7 @@ lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) #ifdef LCD_INVERT_COLORS palette[regno] = ~val; #else - palette[regno] = ~val; + palette[regno] = val; #endif } @@ -763,137 +225,57 @@ lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) red, green, blue, palette[regno]); } -#endif /* LCD_COLOR8 */ +#endif /* LCD_COLOR8 */ /*----------------------------------------------------------------------*/ - #if LCD_BPP == LCD_MONOCHROME -static void lcd_initcolregs (void) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cp = &(immr->im_cpm); + struct pxafb_info *fbi = &panel_info.pxa; + cmap = (ushort *)fbi->palette; ushort regno; for (regno = 0; regno < 16; regno++) { - cp->lcd_cmap[regno * 2] = 0; - cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f; + cmap[regno * 2] = 0; + cmap[(regno * 2) + 1] = regno & 0x0f; } } -#endif - -/*----------------------------------------------------------------------*/ - -static void lcd_setfgcolor (int color) -{ - lcd_color_fg = color & 0x0F; -} - -/*----------------------------------------------------------------------*/ - -static void lcd_setbgcolor (int color) -{ - lcd_color_bg = color & 0x0F; -} - -/*----------------------------------------------------------------------*/ - -#ifdef NOT_USED_SO_FAR -static int lcd_getfgcolor (void) -{ - return lcd_color_fg; -} -#endif /* NOT_USED_SO_FAR */ +#endif /* LCD_MONOCHROME */ /*----------------------------------------------------------------------*/ - -#ifdef NOT_USED_SO_FAR -static int lcd_getbgcolor (void) +void lcd_enable (void) { - return lcd_color_bg; } -#endif /* NOT_USED_SO_FAR */ /*----------------------------------------------------------------------*/ - -static void lcd_enable (void) -{ -} - -/*----------------------------------------------------------------------*/ - #ifdef NOT_USED_SO_FAR static void lcd_disable (void) { } -#endif /* NOT_USED_SO_FAR */ +#endif /* NOT_USED_SO_FAR */ +/*----------------------------------------------------------------------*/ /************************************************************************/ -/* ** Chipset depending Bitmap / Logo stuff... */ +/* ** PXA255 specific routines */ /************************************************************************/ -#ifdef CONFIG_LCD_LOGO -static void bitmap_plot (int x, int y) -{ - ushort *cmap; - ushort i; - uchar *bmap; - uchar *fb; - struct pxafb_info *fbi = &panel_info.pxa; - - debug ("Logo: width %d height %d colors %d cmap %d\n", - BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, - sizeof(bmp_logo_palette)/(sizeof(ushort)) - ); - - /* Leave room for default color map */ - cmap = (ushort *)fbi->palette; - - /* Set color map */ - for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) { - ushort colreg = bmp_logo_palette[i]; -#ifdef CFG_INVERT_COLORS - colreg ^= 0xFFF; -#endif - *cmap++ = colreg; - } - - bmap = &bmp_logo_bitmap[0]; - fb = (char *)(lcd_base + y * lcd_line_length + x); - - for (i=0; ipxa; @@ -903,14 +285,15 @@ static int pxafb_init_mem(void *lcdbase, vidinfo_t *vid) fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; palette_mem_size = fbi->palette_size * sizeof(u16); + debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); /* locate palette and descs at end of page following fb */ - fbi->palette = (u_long)lcdbase + fb_size + 2*PAGE_SIZE - palette_mem_size; + fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; return 0; } -static void pxafb_setup_gpio(vidinfo_t *vid) +static void pxafb_setup_gpio (vidinfo_t *vid) { u_long lccr0; @@ -935,7 +318,7 @@ static void pxafb_setup_gpio(vidinfo_t *vid) /* 8 bit interface */ else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) || - (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS))) + (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS))) { debug("Setting GPIO for 8 bit data\n"); /* bits 58-65 */ @@ -967,7 +350,7 @@ static void pxafb_setup_gpio(vidinfo_t *vid) } } -static void pxafb_enable_controller(vidinfo_t *vid) +static void pxafb_enable_controller (vidinfo_t *vid) { debug("Enabling LCD controller\n"); @@ -990,7 +373,7 @@ static void pxafb_enable_controller(vidinfo_t *vid) debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3); } -static int pxafb_init(vidinfo_t *vid) +static int pxafb_init (vidinfo_t *vid) { struct pxafb_info *fbi = &vid->pxa; @@ -1019,9 +402,8 @@ static int pxafb_init(vidinfo_t *vid) LCCR2_EndFrmDel(vid->vl_efw); fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP); - fbi->reg_lccr3 |= - (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH) - | (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH); + fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH) + | (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH); /* setup dma descriptors */ diff --git a/include/bmp_logo.h b/include/bmp_logo.h index 265f744d0e..9c924b8592 100644 --- a/include/bmp_logo.h +++ b/include/bmp_logo.h @@ -18,7 +18,7 @@ unsigned short bmp_logo_palette[] = { 0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999, 0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3, 0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA, - 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF, + 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF, }; unsigned char bmp_logo_bitmap[] = { diff --git a/include/lcd.h b/include/lcd.h index e0e21840a0..06feab335d 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -1,5 +1,5 @@ /* - * MPC823 LCD Controller + * MPC823 and PXA LCD Controller * * Modeled after video interface by Paolo Scaffardi * @@ -17,7 +17,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -29,17 +29,266 @@ #ifndef _LCD_H_ #define _LCD_H_ -#if defined(CONFIG_RBC823) -void lcd_disable (void); -#endif - extern char lcd_is_enabled; +extern int lcd_line_length; +extern int lcd_color_fg; +extern int lcd_color_bg; + +/* + * Frame buffer memory information + */ +extern void *lcd_base; /* Start of framebuffer memory */ +extern void *lcd_console_address; /* Start of console buffer */ + +extern short console_col; +extern short console_row; + +#if defined CONFIG_MPC823 +/* + * LCD controller stucture for MPC823 CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ + u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ + u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ + u_char vl_clor; /* Color, 0 = mono, 1 = color */ + u_char vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. Timing from data sheet */ + ushort vl_wbl; /* Wait between lines */ + + /* Vertical control register */ + u_char vl_vpw; /* Vertical sync pulse width */ + u_char vl_lcdac; /* LCD AC timing */ + u_char vl_wbf; /* Wait between frames */ +} vidinfo_t; + +extern vidinfo_t panel_info; + +#elif defined CONFIG_PXA250 +/* + * PXA LCD DMA descriptor + */ +struct pxafb_dma_descriptor { + u_long fdadr; /* Frame descriptor address register */ + u_long fsadr; /* Frame source address register */ + u_long fidr; /* Frame ID register */ + u_long ldcmd; /* Command register */ +}; + +/* + * PXA LCD info + */ +struct pxafb_info { + + /* Misc registers */ + u_long reg_lccr3; + u_long reg_lccr2; + u_long reg_lccr1; + u_long reg_lccr0; + u_long fdadr0; + u_long fdadr1; + + /* DMA descriptors */ + struct pxafb_dma_descriptor * dmadesc_fblow; + struct pxafb_dma_descriptor * dmadesc_fbhigh; + struct pxafb_dma_descriptor * dmadesc_palette; + + u_long screen; /* physical address of frame buffer */ + u_long palette; /* physical address of palette memory */ + u_int palette_size; +}; + +/* + * LCD controller stucture for PXA CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ + u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ + u_char vl_clor; /* Color, 0 = mono, 1 = color */ + u_char vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. Timing from data sheet */ + ushort vl_hpw; /* Horz sync pulse width */ + u_char vl_blw; /* Wait before of line */ + u_char vl_elw; /* Wait end of line */ + + /* Vertical control register. */ + u_char vl_vpw; /* Vertical sync pulse width */ + u_char vl_bfw; /* Wait before of frame */ + u_char vl_efw; /* Wait end of frame */ + + /* PXA LCD controller params */ + struct pxafb_info pxa; +} vidinfo_t; + +extern vidinfo_t panel_info; + +#endif /* CONFIG_MPC823 or CONFIG_PXA250 */ + /* Video functions */ +#if defined(CONFIG_RBC823) +void lcd_disable (void); +#endif + + /* int lcd_init (void *lcdbase); */ void lcd_putc (const char c); void lcd_puts (const char *s); void lcd_printf (const char *fmt, ...); + +/************************************************************************/ +/* ** BITMAP DISPLAY SUPPORT */ +/************************************************************************/ +#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) +# include +# include +#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */ + +/************************************************************************/ +/* ** LOGO DATA */ +/************************************************************************/ +#ifdef CONFIG_LCD_LOGO +# include /* Get logo data, width and height */ +#endif + +/* + * Information about displays we are using. This is for configuring + * the LCD controller and memory allocation. Someone has to know what + * is connected, as we can't autodetect anything. + */ +#define CFG_HIGH 0 /* Pins are active high */ +#define CFG_LOW 1 /* Pins are active low */ + +#define LCD_MONOCHROME 0 +#define LCD_COLOR2 1 +#define LCD_COLOR4 2 +#define LCD_COLOR8 3 +#define LCD_COLOR16 4 + +/*----------------------------------------------------------------------*/ +#if defined(LCD_INFO_BELOW_LOGO) +# define LCD_INFO_X 0 +# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) +#elif defined(CONFIG_LCD_LOGO) +# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) +# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) +#else +# define LCD_INFO_X (VIDEO_FONT_WIDTH) +# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) +#endif + +/* Default to 8bpp if bit depth not specified */ +#ifndef LCD_BPP +# define LCD_BPP LCD_COLOR8 +#endif +#ifndef LCD_DF +# define LCD_DF 1 +#endif + +/* Calculate nr. of bits per pixel and nr. of colors */ +#define NBITS(bit_code) (1 << (bit_code)) +#define NCOLORS(bit_code) (1 << NBITS(bit_code)) + +/************************************************************************/ +/* ** CONSOLE CONSTANTS */ +/************************************************************************/ +#if LCD_BPP == LCD_MONOCHROME + +/* + * Simple black/white definitions + */ +# define CONSOLE_COLOR_BLACK 0 +# define CONSOLE_COLOR_WHITE 1 /* Must remain last / highest */ + +#elif LCD_BPP == LCD_COLOR8 + +/* + * 8bpp color definitions + */ +# define CONSOLE_COLOR_BLACK 0 +# define CONSOLE_COLOR_RED 1 +# define CONSOLE_COLOR_GREEN 2 +# define CONSOLE_COLOR_YELLOW 3 +# define CONSOLE_COLOR_BLUE 4 +# define CONSOLE_COLOR_MAGENTA 5 +# define CONSOLE_COLOR_CYAN 6 +# define CONSOLE_COLOR_GREY 14 +# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ + +#else + +/* + * 16bpp color definitions + */ +# define CONSOLE_COLOR_BLACK 0x0000 +# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ + +#endif /* color definitions */ + +#if defined(CONFIG_LCD_LOGO) && (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) +# error Default Color Map overlaps with Logo Color Map #endif + +/************************************************************************/ +#ifndef PAGE_SIZE +# define PAGE_SIZE 4096 +#endif + +/************************************************************************/ +/* ** CONSOLE DEFINITIONS & FUNCTIONS */ +/************************************************************************/ +#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) +# define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \ + / VIDEO_FONT_HEIGHT) +#else +# define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT) +#endif + +#define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH) +#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length) +#define CONSOLE_ROW_FIRST (lcd_console_address) +#define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE) +#define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \ + - CONSOLE_ROW_SIZE) +#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS) +#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE) + +#if LCD_BPP == LCD_MONOCHROME +# define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ + (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) +#elif LCD_BPP == LCD_COLOR8 +# define COLOR_MASK(c) (c) +#else +# error Unsupported LCD BPP. +#endif + +/************************************************************************/ + +#endif /* _LCD_H_ */ diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c index 6855d5f949..bf265666c5 100644 --- a/lib_arm/armlinux.c +++ b/lib_arm/armlinux.c @@ -38,7 +38,8 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); defined (CONFIG_INITRD_TAG) || \ defined (CONFIG_SERIAL_TAG) || \ defined (CONFIG_REVISION_TAG) || \ - defined (CONFIG_VFD) + defined (CONFIG_VFD) || \ + defined (CONFIG_LCD) static void setup_start_tag (bd_t *bd); # ifdef CONFIG_SETUP_MEMORY_TAGS @@ -55,7 +56,7 @@ static void setup_initrd_tag (bd_t *bd, ulong initrd_start, # endif static void setup_end_tag (bd_t *bd); -# if defined (CONFIG_VFD) +# if defined (CONFIG_VFD) || defined (CONFIG_LCD) static void setup_videolfb_tag (gd_t *gd); # endif @@ -229,6 +230,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], defined (CONFIG_INITRD_TAG) || \ defined (CONFIG_SERIAL_TAG) || \ defined (CONFIG_REVISION_TAG) || \ + defined (CONFIG_LCD) || \ defined (CONFIG_VFD) setup_start_tag (bd); #ifdef CONFIG_SERIAL_TAG @@ -247,7 +249,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], if (initrd_start && initrd_end) setup_initrd_tag (bd, initrd_start, initrd_end); #endif -#if defined (CONFIG_VFD) +#if defined (CONFIG_VFD) || defined (CONFIG_LCD) setup_videolfb_tag ((gd_t *) gd); #endif setup_end_tag (bd); @@ -274,6 +276,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], defined (CONFIG_INITRD_TAG) || \ defined (CONFIG_SERIAL_TAG) || \ defined (CONFIG_REVISION_TAG) || \ + defined (CONFIG_LCD) || \ defined (CONFIG_VFD) static void setup_start_tag (bd_t *bd) { @@ -351,7 +354,8 @@ static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end) #endif /* CONFIG_INITRD_TAG */ -#if defined (CONFIG_VFD) +#if defined (CONFIG_VFD) || defined (CONFIG_LCD) +extern ulong calc_fbsize (void); static void setup_videolfb_tag (gd_t *gd) { /* An ATAG_VIDEOLFB node tells the kernel where and how large @@ -365,12 +369,13 @@ static void setup_videolfb_tag (gd_t *gd) params->hdr.size = tag_size (tag_videolfb); params->u.videolfb.lfb_base = (u32) gd->fb_base; - /* 7168 = 256*4*56/8 - actually 2 pages (8192 bytes) are allocated */ - params->u.videolfb.lfb_size = 7168; + /* Fb size is calculated according to parameters for our panel + */ + params->u.videolfb.lfb_size = calc_fbsize(); params = tag_next (params); } -#endif +#endif /* CONFIG_VFD || CONFIG_LCD */ static void setup_end_tag (bd_t *bd) { diff --git a/tools/bmp_logo.c b/tools/bmp_logo.c index c473baa0dd..8e728e23c3 100644 --- a/tools/bmp_logo.c +++ b/tools/bmp_logo.c @@ -120,25 +120,13 @@ int main (int argc, char *argv[]) b->palette[(int)(i*3+0)] = fgetc(fp); x=fgetc(fp); -#if 0 - if ((i%4) == 0) - putchar ('\t'); - printf ("0x%02X, 0x%02X, 0x%02X,%s", - b->palette[(int)(i*3+0)], - b->palette[(int)(i*3+1)], - b->palette[(int)(i*3+2)], - ((i%4) == 3) ? "\n" : " " - ); -#else - if ((i%8) == 0) - putchar ('\t'); - printf ("0x0%X%X%X,%s", + printf ("%s0x0%X%X%X,%s", + ((i%8) == 0) ? "\t" : " ", (b->palette[(int)(i*3+0)] >> 4) & 0x0F, (b->palette[(int)(i*3+1)] >> 4) & 0x0F, (b->palette[(int)(i*3+2)] >> 4) & 0x0F, - ((i%8) == 7) ? "\n" : " " + ((i%8) == 7) ? "\n" : "" ); -#endif } /* read the bitmap; leave room for default color map */ -- cgit