summaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* mips-relocs: Fix warning from gcc 6.3Paul Burton2017-07-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that gcc 6.3 at least is smart enough to warn about the _val variable being unassigned in the default case in the set_hdr_field() macro, but not smart enough to figure out that the default case is never taken. This results in warnings such as the following: pfx##hdr32[idx].field = _val; \ ^ ../tools/mips-relocs.c:51:11: note: _val was declared here uint64_t _val; \ ^ ../tools/mips-relocs.c:88:2: note: in expansion of macro set_hdr_field set_hdr_field(p, idx, field, val) ^~~~~~~~~~~~~ ../tools/mips-relocs.c:408:3: note: in expansion of macro set_phdr_field set_phdr_field(i, p_filesz, load_sz); ^~~~~~~~~~~~~~ ../tools/mips-relocs.c: In function main: ../tools/mips-relocs.c:77:25: warning: _val may be used uninitialized in this function [-Wmaybe-uninitialized] Avoid this by assigning _val = 0 in the default case, and asserting that we didn't actually hit it for good measure. For reference gcc 7.1.1 seems to be smart enough to not hit the above warning without this patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 011dd93ca97a ("MIPS: Stop building position independent code") Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: u-boot@lists.denx.de
* MIPS: Stop building position independent codePaul Burton2017-07-253-0/+429
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* RFC: moveconfig: Use toolchains from buildmanSimon Glass2017-07-221-96/+34
| | | | | | | | | | | | | | | | It is annoying to have to set up and maintain two sets of toolchains, one for buildman and one for moveconfig. Adjust moveconfig to make use to buildman's toolchains. This should make things easier. One missing feature is the ability to specify the toolchain on the command line with a special environment variable, e.g. CROSS_COMPILE_ARM. I'm not sure if that is useful, but if it is it could be implemented in buildman. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* moveconfig: Tidy up imply flag parsingSimon Glass2017-07-221-8/+15
| | | | | | | | Add an option to specify 'all' to enable all flags. Also print an error if an unrecognised flag is used. At present it just prints usage information which is not very helpful. Signed-off-by: Simon Glass <sjg@chromium.org>
* dtc: mkimage: Add the possibility to specify DTCEmmanuel Vadot2017-07-222-1/+2
| | | | | | | | | | FreeBSD recently switch to it's BSDL dtc. While it support most of the features of the GPL one it still lacks the incbin directive. Add the possibility to specify which dtc we want to use for compiling dts and generating fit image. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Acked-by: Simon Glass <sjg@chromium.org>
* tools/fw_env: use fsync to ensure that data is physically storedMichael Heimpold2017-07-221-0/+12
| | | | | | | Closing a file descriptor does not guarantee that the data has been successfully saved to disk, as the kernel might defer the write. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-07-181-1/+1
|\
| * imx: reorganize IMX code as other SOCsStefano Babic2017-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/<SOC>. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Akshay Bhat <akshaybhat@timesys.com> CC: Ken Lin <Ken.Lin@advantech.com.tw> CC: Marek Vasut <marek.vasut@gmail.com> CC: Heiko Schocher <hs@denx.de> CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> CC: Christian Gmeiner <christian.gmeiner@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Patrick Bruenn <p.bruenn@beckhoff.com> CC: Troy Kisky <troy.kisky@boundarydevices.com> CC: Nikita Kiryanov <nikita@compulab.co.il> CC: Otavio Salvador <otavio@ossystems.com.br> CC: "Eric Bénard" <eric@eukrea.com> CC: Jagan Teki <jagan@amarulasolutions.com> CC: Ye Li <ye.li@nxp.com> CC: Peng Fan <peng.fan@nxp.com> CC: Adrian Alonso <adrian.alonso@nxp.com> CC: Alison Wang <b18965@freescale.com> CC: Tim Harvey <tharvey@gateworks.com> CC: Martin Donnelly <martin.donnelly@ge.com> CC: Marcin Niestroj <m.niestroj@grinn-global.com> CC: Lukasz Majewski <lukma@denx.de> CC: Adam Ford <aford173@gmail.com> CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> CC: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Soeren Moch <smoch@web.de> CC: Richard Hu <richard.hu@technexion.com> CC: Wig Cheng <wig.cheng@technexion.com> CC: Vanessa Maegima <vanessa.maegima@nxp.com> CC: Max Krummenacher <max.krummenacher@toradex.com> CC: Stefan Agner <stefan.agner@toradex.com> CC: Markus Niebel <Markus.Niebel@tq-group.com> CC: Breno Lima <breno.lima@nxp.com> CC: Francesco Montefoschi <francesco.montefoschi@udoo.org> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Scott Wood <oss@buserror.net> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Anatolij Gustschin <agust@denx.de> CC: Simon Glass <sjg@chromium.org> CC: "Andrew F. Davis" <afd@ti.com> CC: "Łukasz Majewski" <l.majewski@samsung.com> CC: Patrice Chotard <patrice.chotard@st.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Hans de Goede <hdegoede@redhat.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Stephen Warren <swarren@nvidia.com> CC: Andre Przywara <andre.przywara@arm.com> CC: "Álvaro Fernández Rojas" <noltari@gmail.com> CC: York Sun <york.sun@nxp.com> CC: Xiaoliang Yang <xiaoliang.yang@nxp.com> CC: Chen-Yu Tsai <wens@csie.org> CC: George McCollister <george.mccollister@gmail.com> CC: Sven Ebenfeld <sven.ebenfeld@gmail.com> CC: Filip Brozovic <fbrozovic@gmail.com> CC: Petr Kulhavy <brain@jikos.cz> CC: Eric Nelson <eric@nelint.com> CC: Bai Ping <ping.bai@nxp.com> CC: Anson Huang <Anson.Huang@nxp.com> CC: Sanchayan Maity <maitysanchayan@gmail.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Patrick Delaunay <patrick.delaunay@st.com> CC: Gary Bisson <gary.bisson@boundarydevices.com> CC: Alexander Graf <agraf@suse.de> CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
* | tools/kwbimage: fix v1 header verificationBaruch Siach2017-07-121-6/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The verify_header callback in kwbimage.c only verifies v0 headers checksum. Running 'mkimage -l' on a v1 image gives the following misleading output: GP Header: Size ae000000 LoadAddr 34160600 Implement support for v1 headers. For that, factor out the header checksum code to a separate main_hdr_checksum_ok() routine. This routine relies on the fact that the checksum field offset is the same in both v0 and v1 headers. With this patch applied 'mkimage -l' correctly identifies the image: Image Type: MVEBU Boot from sdio Image Image version:1 Data Size: 398904 Bytes = 389.55 KiB = 0.38 MiB Load Address: 007fffc0 Entry Point: 00800000 Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
* | tools/kwbimage.h: make offset marks style consistentBaruch Siach2017-07-121-31/+31
| | | | | | | | | | | | | | | | | | The offset marking in kwbimage.h is inconsistent. main_hdr_v0 uses decimals, main_hdr_v1 uses hex without '0x' prefix, secure_hdr_v1 uses hex with '0x' prefix. Make all offset marks hex with '0x' prefix. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
* | tools/kwbimage: update the list of SoCs using v1 headerBaruch Siach2017-07-121-1/+1
|/ | | | | | | Armada 38x also uses image header v1. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge git://git.denx.de/u-boot-dmTom Rini2017-07-1110-429/+1476
|\
| * binman: Put our local modules ahead of system modulesSimon Glass2017-07-111-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | If a system module is named the same as one of those used by binman we currently pick the system module. Adjust the ordering so that our modules are chosen instead. The module conflict reported was 'tools' from jira-python. I cannot access that package to test it. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com>
| * dtoc: Add testsSimon Glass2017-07-117-4/+411
| | | | | | | | | | | | | | Add some tests of dtoc's functionality to make it easier to expand and enhance the tool. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Add a comment about string replace in conv_name_to_c()Simon Glass2017-07-111-0/+3
| | | | | | | | | | | | | | | | This function uses several separate string replaces where a regular expression might seem more reasonable. Add a comment justifying the way it is currently done. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Move the main logic into the dtb_platdata fileSimon Glass2017-07-112-17/+31
| | | | | | | | | | | | | | | | Collect the main logic of dtoc into a function and put it into dtb_platdata. This will allow tests to use this function instead of duplicating the code themselves. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Move static functions out of the classSimon Glass2017-07-111-62/+63
| | | | | | | | | | | | | | Rather than using static functions within the class, move them out of the class. This will make it slightly easier for tests to call them. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Pass include_disabled explicitlySimon Glass2017-07-112-5/+5
| | | | | | | | | | | | | | | | This option is the only one actually used by the dtb_platdata class. Pass it explicitly to avoid needing to pass the whole option object to the constructor. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Don't handle properties with / in themSimon Glass2017-07-111-1/+0
| | | | | | | | | | | | | | This conversion appears to not be needed as it does not occur in practice. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Fix pylint warningsSimon Glass2017-07-112-131/+144
| | | | | | | | | | | | | | Unfortunately I neglected to run pylint on this tool with its initial submission. Fix the warnings. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Split out the main class into its own fileSimon Glass2017-07-112-405/+414
| | | | | | | | | | | | | | | | To simplify running tests we should move this class into its own file. This allows the tests to import it without having to import dtoc.py, which runs the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Add a comment at the topSimon Glass2017-07-111-0/+20
| | | | | | | | | | | | Add a description of the dtoc tool at the top of the file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Use self._options instead of the global optionsSimon Glass2017-07-111-2/+2
| | | | | | | | | | | | | | This class should use the options object passed to it rather than finding the global one. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Allow automatic location and adding of 'imply'Simon Glass2017-07-111-9/+215
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By using a Kconfig parser we can find the location of each option in the Kconfig tree. Using the information from the database we can then automatically add an 'imply' option into the right place if requested by the user. Add a -a option to support adding 'imply' options. Display the location of any existing 'imply' option so that progress can be examined. Add a -A option to hide any existing 'imply' options so that already-completed additions need not be considered further. Also add documentation for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Allow control of which implying configs are shownSimon Glass2017-07-111-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes it is useful to display CONFIG_TARGET or CONFIG_CMD configs. Add an option to control this. Also we generally ignore implying configs which affect fewer than 5 boards. But sometimes it is useful to show those those, so add an option that reduces the minimum to two. ERRATUM configs are never useful for implying things, so ignore those. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Allow piping in 'git show --stat' outputSimon Glass2017-07-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to process only a subset of boards to save time. Often that subset is defined by the defconfig files in a git commit. This change allows things like: # Build the database ./tools.moveconfig.py -b # Find some implying configs ./tools/moveconfig.py -i CONFIG_X # Add some 'imply' statements to Kconfig files ./tools/moveconfig.py -i CONFIG_X -a CONFIG_A,CONFIG_B # Reprocess the defconfig files to see if we can drop some changes git show --stat | ./tools/moveconfig.py -s -d - # Update the commit, with fewer defconfig changes gii commit -au Where the commit contains defconfig files, this will reprocess them to take account of the imply statements that you added. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dtoc: Support multiple compatible strings in a nodeSimon Glass2017-07-111-7/+21
| | | | | | | | | | | | | | | | | | | | | | Sometimes a node will have multiple compatible strings. Drivers may use one or the other so the best approach seems to be to #define them to be equivalent. Update dtoc to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Kever Yang <kever.yang@rock-chips.com>
| * moveconfig: Support looking for implied CONFIG optionsSimon Glass2017-07-111-1/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | Some CONFIG options can be implied by others and this can help to reduce the size of the defconfig files. For example, CONFIG_X86 implies CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to each of the x86 defconfig files. Add a -i option which searches for such options. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
| * moveconfig: Support building a simple config databaseSimon Glass2017-07-111-7/+74
| | | | | | | | | | | | | | | | | | | | | | | | Add a -b option which scans all the defconfigs and builds a database of all the CONFIG options used by each. This is useful for querying later. At present this only works with the separate -b option, which does not move any configs. It would be possible to adjust the script to build the database automatically when moving configs, but this might not be useful as the database does not change that often. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Add a constant for auto.confSimon Glass2017-07-111-4/+6
| | | | | | | | | | | | | | This filename is used a few times. Move it to a constant before adding further uses. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Tidy up the documentation and add hintsSimon Glass2017-07-111-2/+20
| | | | | | | | | | | | | | The newest clean-up features are not mentioned in the docs. Fix this and add a few hints for particular workflows that are hopefully helpful. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Allow reading the defconfig list from stdinSimon Glass2017-07-111-3/+18
| | | | | | | | | | | | | | Support passes in a defconfig filename of '-' to read the list from stdin instead of from a file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * moveconfig: Support providing a path to the defconfig filesSimon Glass2017-07-111-2/+19
| | | | | | | | | | | | | | | | | | | | | | It is convenient to provide the full patch to the defconfig files in some situations, e.g. when the file was generated by a shell command (e.g. 'ls configs/zynq*'). Add support for this, and move the globbing code into a function with its own documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
* | rockchip: mkimage: add support for rk322x socKever Yang2017-07-111-0/+1
|/ | | | | | | Add support for rk322x package header in mkimage tool. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* avr32: Retire AVR32 for goodAndy Shevchenko2017-07-062-10/+2
| | | | | | | | | | | | | | AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* mkimage: fix display of image types listBaruch Siach2017-07-061-1/+5
| | | | | | | | | | | | | Since commit 5b9d44df2307f (mkimage: Display a better list of available image types) mkimage usage text suggest to "use -T to see a list of available image types". Unfortunately, commit 02221f29deb8 (mkimage: Convert to use getopt()) broke that feature, because getopt() fails when -T has no option argument. Add a pseudo image type name 'list' that lists all image types. Update the usage text accordingly. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
* rockchip: mkimage: correct spl_size for rk3399Kever Yang2017-06-231-1/+1
| | | | | | | | | | The maximum spl_size for rk3399 is the internal memory size minus the size used in bootrom (which usually can get from SPL_TEXT_BASE). Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* rkcommon.c: Remove unused rkcommon_spi_to_offsetTom Rini2017-06-231-5/+0
| | | | | | | | | | This function is unused, remove. Reported by clang-3.8. Fixes: a1c29d4b43dc ("rockchip: mkimage: set init_boot_size to avoid ...") Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* powerpc, 5xx: remove some "5xx" remainsHeiko Schocher2017-06-162-2/+0
| | | | | | we removed 5xx support. So delete some forgotten remains. Signed-off-by: Heiko Schocher <hs@denx.de>
* treewide: remove unneeded semicolonsMasahiro Yamada2017-06-161-1/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* tools/tbot: update READMEHeiko Schocher2017-06-124-684/+0
| | | | | | | | refer in the README to tbots webpage, and delete the README in tools/tbot, as the latest documentation for tbot is on this webpage. Signed-off-by: Heiko Schocher <hs@denx.de>
* rkcommon.c: Drop pointless assignmentSimon Glass2017-06-121-1/+2
| | | | | | | | | Assigning a variable to itself is not necessary. Drop this and also add a check for malloc() failure. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 161418) Fixes: 111bcc4 (rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399)
* fdtgrep: Deal with NULL data passed to check_type_include()Simon Glass2017-06-121-11/+14
| | | | | | | | | Since the parameter can be NULL we must be careful not to dereference it in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 163250) Fixes: 1043d0a0 (fdt: Add fdtgrep tool)
* Merge git://git.denx.de/u-boot-dmTom Rini2017-06-1014-35/+503
|\
| * buildman: properly translate strings for log and err files to ASCIIDaniel Schwierzeck2017-06-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | The build output can still produce unicode encoded output. But in the buildman's log and err files we only want plain ASCII characters. To handle all situations with unicode and non-unicode output, encode the stdout and stderr strings to UTF-8 and afterwards to ASCII with replacing all special characters. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * buildman: disable localized and unicode output of all build toolsDaniel Schwierzeck2017-06-091-1/+5
| | | | | | | | | | | | | | | | | | | | Build tools like Make, gcc or binutils support localized output or unicode encoded output dependent on the default system locale. This is not useful for buildman, where we want reproducible warning or error messages or where the output of binutils is further processed. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * patman: Add a functional testSimon Glass2017-06-087-2/+459
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing test (patman --test) only covers basic checkpatch output. We have had some problems with unicode processing and could use test coverage for the various tags patman supports. Add a new functional test which runs most of the patman flow on a few test commits and checks that the results are correct. See the documentation in the test for a description of what it does. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * patman: Rename 'list' variable in MakeCcFile()Simon Glass2017-06-081-10/+10
| | | | | | | | | | | | | | | | This is not a good variable name in Python because 'list' is a type. It shows up highlighted in some editors. Rename it. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * patman: Add a maintainer test feature to MakeCcFile()Simon Glass2017-06-081-2/+6
| | | | | | | | | | | | | | | | | | Allow the add_maintainers parameter to be a list of maintainers, thus allowing us to simulate calling the script in tests without actually needing it to work. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * patman: Add unicode to test patchesSimon Glass2017-06-081-0/+9
| | | | | | | | | | | | | | | | Add some unicode to the test patches to make sure that patman does the right thing. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-11-16 08:12:30 +0000