summaryrefslogtreecommitdiffstats
path: root/test
Commit message (Collapse)AuthorAgeFilesLines
* pytest: add sandbox test for "extension" commandKory Maincent2021-05-131-0/+53
| | | | | | | | | | | | This commit extends the sandbox to implement a dummy extension_board_scan() function and enables the extension command in the sandbox configuration. It then adds a test that checks the proper functionality of the extension command by applying two Device Tree overlays to the sandbox Device Tree. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> [trini: Limit to running on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
* Revert "fdt: translate address if #size-cells = <0>"Dario Binacchi2021-05-121-68/+0
| | | | | | | | | | | | | | | | This reverts commit d64b9cdcd475eb7f07b49741ded87e24dae4a5fc. As pointed by [1] and [2], the reverted patch made every DT 'reg' property translatable. What the patch was trying to fix was fixed in a different way from previously submitted patches which instead of correcting the generic address translation function fixed the issue with appropriate platform code. [1] https://patchwork.ozlabs.org/project/uboot/patch/1614324949-61314-1-git-send-email-bmeng.cn@gmail.com/ [2] https://lore.kernel.org/linux-clk/20210402192054.7934-1-dariobin@libero.it/T/ Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* sandbox: add test of CONFIG_ENV_IMPORT_FDTRasmus Villemoes2021-05-042-0/+21
| | | | | | | | | | | | Check that a variable defined in /config/environment is found in the run-time environment, and that clearing fdt_env_path from within that node works. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [trini: Conditionalize the test being linked in] Signed-off-by: Tom Rini <trini@konsulko.com>
* test: Add gpio-sysinfo testSean Anderson2021-05-042-0/+70
| | | | | | | This adds a test for the gpio-sysinfo driver. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sysinfo: Require that sysinfo_detect be called before other methodsSean Anderson2021-05-041-10/+15
| | | | | | | | | | This has the uclass enforce calling detect() before other methods. This allows drivers to cache information in detect() and perform (cheaper) retrieval in the other accessors. This also modifies the only instance where this sequencing was not followed. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* test: dm: add test item for ofnode_get_addr() and ofnode_get_size()Chen Guanqiao2021-04-291-0/+31
| | | | | | | | | | | Add test item for getting address and size functions Test the following function: - ofnode_get_addr() - ofnode_get_size() Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* tests: patman: Add requests to the module listTom Rini2021-04-291-0/+1
| | | | | | | The patman tests require the requests module, add it. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* test: Use positive conditional in test_matches()Andy Shevchenko2021-04-291-6/+6
| | | | | | | | | | It is easier to read the positive conditional. While at it, convert hard coded length of "_test_" to strlen("_test_") which will be converted to a constant bu optimizing compiler. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* test: Allow simple glob pattern in the test nameAndy Shevchenko2021-04-291-2/+9
| | | | | | | | | When run `ut dm [test name]` allow to use simple pattern to run all tests started with given prefix. For example, to run all ACPI test cases: ut dm acpi* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* test: reset: Extend base reset test to catch errorNeil Armstrong2021-04-271-5/+34
| | | | | | | | | | | | | | | | | With this extended test, we get the following failure : => ut dm reset_base Test: dm_test_reset_base: reset.c test/dm/reset.c:52, dm_test_reset_base(): reset_method3.id == reset_method3_1.id: Expected 0x14 (20), got 0x2 (2) Test: dm_test_reset_base: reset.c (flat tree) test/dm/reset.c:52, dm_test_reset_base(): reset_method3.id == reset_method3_1.id: Expected 0x14 (20), got 0x2 (2) Failures: 2 A fix is needed in reset_get_by_index_nodev() when introduced in [1]. [1] ea9dc35aab ("reset: Get the RESET by index without device") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* test/py: Bump py to 1.10.0 for CVE-2020-29651Tom Rini2021-04-241-1/+1
| | | | | | | | Bump our py version to 1.10.0 to address CVE-2020-29651. Reported-by: GitHub dependabot Reported-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* test/py: Fix efidebug related testsIlias Apalodimas2021-04-244-19/+19
| | | | | | | | | | | | | | commit cbea241e935e("efidebug: add multiple device path instances on Boot####") slightly tweaked the efidebug syntax adding -b, -i and -s for the boot image, initrd and optional data. The pytests using this command were adapted as well. However I completely missed the last "" argument, which at the time indicated the optional data and needed conversion as well. This patch is adding the missing -s flag and the tests are back to normal. Fixes: cbea241e935e("efidebug: add multiple device path instances on Boot####") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviwed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* test: lmb: add test for overflow protection in lmb_add_regionPatrick Delaunay2021-04-221-0/+64
| | | | | | Add test for max number of memory regions and in reserved regions. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* test: Add test for partitionsSean Anderson2021-04-222-0/+77
| | | | | | | | This is technically a library function, but we use MMCs for testing, so it is easier to do it with DM. At the moment, the only block devices in sandbox are MMCs (AFAIK) so we just test with those. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
* test: Alphabetize dm MakefileSean Anderson2021-04-221-32/+32
| | | | | | | | Recently, tests have been added primarily to the end of the dm Makefile. This results in merge conflicts when two people add new tests at the same time. To reduce these conflicts, alphabetize the makefile. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
* Add support for stack-protectorJoel Peshkin2021-04-201-0/+14
| | | | | | | | | | Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* test: fix test/dm/regmap.cHeinrich Schuchardt2021-04-201-4/+5
| | | | | | | | | | | | regmap_read() only fills the first two bytes of val. The last two bytes are random data from the stack. This means the test will fail randomly. For low endian systems we could simply initialize val to 0 and get correct results. But tests should not depend on endianness. So let's use a pointer conversion instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge tag 'ti-v2021.07-rc1' of ↵Tom Rini2021-04-181-5/+86
|\ | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-ti - Support for pinmux status command on beaglebone - Updates for MMC speed modes for J721e-evm - Fix MMC booting on omap35_logic_somlv board
| * test: pinmux: add test for 'pinctrl-single' driverDario Binacchi2021-04-121-5/+86
| | | | | | | | | | | | | | | | | | | | | | The test adds two pinmux nodes to the device tree, one to test when a register changes only one pin's mux (pinctrl-single,pins), and the other to test when more than one pin's mux is changed (pinctrl-single,bits). This required replacing the controller's register access functions when the driver is used on sandbox. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch '2021-04-14-assorted-vboot-improvements'Tom Rini2021-04-152-0/+112
|\ \ | | | | | | | | | | | | | | | - Add ECDSA support to FIT images - Improve FIT image loadables (incl fpga) support - Further FIT improvements with SPL
| * | test/py: ecdsa: Use mkimage keyfile instead of keydir argumentAlexandru Gagniuc2021-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, the ECDSA code path used 'keydir' as the key filename. mkimage has since been updated to include a new 'keyfile' argument. Use the new argument for passing in the key. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | test/py: ecdsa: Add test for mkimage ECDSA signingAlexandru Gagniuc2021-04-141-0/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a test to make sure that the ECDSA signatures generated by mkimage can be verified successfully. pyCryptodomex was chosen as the crypto library because it integrates much better with python code. Using openssl would have been unnecessarily painful. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | test/py: Add pycryptodomex to list of required pakagesAlexandru Gagniuc2021-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | We wish to use pycryptodomex to verify code paths involving ECDSA signatures. Add it to requirements.txt so that they get picked up automatically .gitlab and .azure tasks Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | test: dm: Add a test case for simple-bus <ranges>Bin Meng2021-04-152-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a test case to verify reading <ranges> of a simple-bus is working as expected. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | | test: dm: Add a case to test ofnode_phy_is_fixed_link()Bin Meng2021-04-151-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a test case to test the new ofnode_phy_is_fixed_link() API. Both the new and old DT bindings are covered. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | | sandbox: Add a DSA sandbox driver and unit testClaudiu Manoil2021-04-153-5/+88
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DSA sandbox driver is used for unit testing the DSA class code. It implements a simple 2 port switch plus 1 CPU port, and uses a very simple tag to identify the ports. The DSA sandbox device is connected via CPU port to a regular Ethernet sandbox device, called 'dsa-test-eth, managed by the existing eth sandbox driver. The 'dsa-test-eth' is not intended for testing the eth class code however, but it is used to emulate traffic through the 'lan0' and 'lan1' front pannel switch ports. To achieve this the dsa sandbox driver registers a tx handler for the 'dsa-test-eth' device. The switch ports, labeled as 'lan0' and 'lan1', are also registered as eth devices by the dsa class code this time. So pinging through these switch ports is as easy as: => setenv ethact lan0 => ping 1.2.3.5 Unit tests for the dsa class code were also added. The 'dsa_probe' test exercises most API functions from dsa.h. The 'dsa' unit test simply exercises ARP/ICMP traffic through the two switch ports, including tag injection and extraction, with the help of the dsa sandbox driver. I took care to minimize the impact on the existing eth unit tests, though some adjustments needed to be made with the addition of extra eth interfaces used by the dsa unit tests. The additional eth interfaces also require MAC addresses, these have been added to the sandbox default environment. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-Id: <20210216224804.3355044-5-olteanv@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | test: qemu: add qfw sandbox driver, dm tests, qemu testsAsherah Connor2021-04-123-0/+69
| | | | | | | | | | | | | | | | | | | | A sandbox driver and test are added for the qfw uclass, and a test in QEMU added for qfw functionality to confirm it doesn't break in real world use. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | test: Add test for strlcatSean Anderson2021-04-122-0/+127
| | | | | | | | | | | | | | | | This test is adapted from glibc, which is very concerned about alignment. It also tests strlcpy by dependency. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | test: scmi: add local variables for scmi agent referenceEtienne Carriere2021-04-121-45/+55
| | | | | | | | | | | | | | | | | | | | | | Add local variables agent0/agent1 to refer to SCMI sandbox context agent and ease readability of the test. For consistency, rename regul_dev to regul0_dev and remove sandbox_voltd in dm_test_scmi_voltage_domains(). Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* | firmware: scmi: fix inline comments and minor coding style issuesEtienne Carriere2021-04-121-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix inline comments and empty line in scmi driver and test files. Remove test on IS_ENABLED(CONFIG_*_SCMI) in test/dm/scmi.c since these configuration are expected enabled when CONFIG_FIRMWARE_SCMI is enabled in sandbox configuration. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* | firmware: scmi: sandbox test for voltage regulatorEtienne Carriere2021-04-121-0/+58
| | | | | | | | | | | | | | | | | | Implement sandbox regulator devices for SCMI voltage domains and test them in DM scmi tests. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* | hush: Fix assignments being misinterpreted as commandsSean Anderson2021-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | If there were no variable substitutions in a command, then initial assignments would be misinterpreted as commands, instead of being skipped over. This is demonstrated by the following example: => foo=bar echo baz Unknown command 'foo=bar' - try 'help' Signed-off-by: Sean Anderson <seanga2@gmail.com>
* | video: backlight: Support PWMs without a known period_nsAlper Nebi Yasak2021-04-101-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The PWM device provided by Chrome OS EC doesn't really support anything other than setting a relative duty cycle. To support it as a backlight, this patch makes the PWM period optional in the device tree and pretends the valid brightness range is its period_ns. Also adds a sandbox test for a PWM channel that has a fixed period, checking that the resulting duty_cycle matches on a set_config() even if the requested period_ns can't be set. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | test: unit test for longjmpHeinrich Schuchardt2021-04-082-0/+74
| | | | | | | | | | | | | | Provide a unit test for the longjmp() library function Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Sean Anderson <seanga2@gmail.com>
* | pytest: Lower pygit2 requirementTom Rini2021-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | The latest versions of pygit2 are not available in practically any distribution at this time. Furthermore, we don't need the latest in order to run all of our testsuites. Reduce this version requirement to something older that meets our needs while still supporting running our tests on older hosts (and so, test labs). Reported-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | test: Allow tests to run on any boardSimon Glass2021-04-061-3/+2
| | | | | | | | | | | | | | | | | | | | Due to a recent change, tests are limited to running on sandbox only. Correct this so that any architecture can run them. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Sean Anderson <seanga2@gmail.com> Fixes: c79705ea938 ("test: Move dm_test_init() into test-main.c") Tested-by: Sean Anderson <seanga2@gmail.com>
* | Merge branch 'next'Tom Rini2021-04-0542-432/+1030
|\ \ | |/ |/|
| * Merge tag 'v2021.04-rc5' into nextTom Rini2021-03-292-2/+2
| |\ | | | | | | | | | Prepare v2021.04-rc5
| * | sf: Support querying write-protectSimon Glass2021-03-271-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature was dropped from U-Boot some time ago: f12f96cfaf5 (sf: Drop spl_flash_get_sw_write_prot") However, we do need a way to see if a flash device is write-protected, since if it is, it may not be possible to write to do (i.e. failing to write is expected). I am not sure of the correct layer to implement this, so this patch is a stab at it. If spi-flash makes sense then I will add to the 'sf' also. Re the points mentioned in the removal commit: 1) This kind of requirement can be achieved using existing flash operations and flash locking API calls instead of making a separate flash API. Which uclass is this? 2) Technically there is no real hardware user for this API to use in the source tree. I do want coral (at least) to support this. 3) Having a flash operations API for simple register read bits also make difficult to extend the flash operations. This new patch only mentions write-protect being on or off, rather than the actual mechanism. 4) Instead of touching generic code, it is possible to have this functionality inside spinor operations in the form of flash hooks or fixups for associated flash chips. That sounds to me like what drivers are for. But we still need some sort of API for it to be accessible. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | test: Silenece the echo and print testsSimon Glass2021-03-272-3/+8
| | | | | | | | | | | | | | | | | | | | | These tests current produce unwanted output on sandbox. Use the correct functions to controller console output, to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | Merge tag 'dm-pull-26mar21-take2' of git://git.denx.de/u-boot-dm into nextTom Rini2021-03-266-32/+44
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dtoc support for of-platdata-inst driver model support for of-platdata-inst support of-platdata-inst on x86 / coral binman support for exapanded entries binman convert docs to reST ti-sysc fix for duplicate uclass driver patman minor improvements pylibfdt build only if needed correct obscure CI error with OF_PLATDATA_INST
| | * | dm: core: Create a struct for device runtime infoSimon Glass2021-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present when driver model needs to change a device it simply updates the struct udevice structure. But with of-platdata-inst most of the fields are not modified at runtime. In fact, typically only the flags need to change. For systems running SPL from read-only memory it is convenient to separate out the runtime information, so that the devices don't need to be copied before being used. Create a new udevice_rt table, similar to the existing driver_rt. For now it just holds the flags, although they are not used in this patch. Add a new Kconfig for the driver_rt data, since this is not needed when of-platdata-inst is used. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | test: Run sandbox_spl tests on sandbox_noinstSimon Glass2021-03-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Run the tests on this build too, to prevent regressions. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | sandbox: Create a new sandbox_noinst buildSimon Glass2021-03-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move sandbox_spl over to use OF_PLATDATA_INST. Create a new board to test the case when this is not enabled, since we will be keeping that code around for several months and want to avoid regressions. Skip the dm_test_of_plat_dev() test since driver info is not available for OF_PLATDATA_INST. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | Revert "sandbox: Disable I2C emulators in SPL"Simon Glass2021-03-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent changes this can be supported again. Add it back. This reverts commit d85f2c4f2970d0ec2f5f075de734afd11200d153. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: Rename device_get_by_driver_info_idx()Simon Glass2021-03-261-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function finds a device by its driver_info index. With of-platdata-inst we do not use driver_info, but instead instantiate udevice records at build-time. However the semantics of using the function are the same in each case: the caller provides an index and gets back a device. So rename the function to device_get_by_ofplat_idx(), so that it can be used for both situations. The caller does not really need to worry about the details. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: core: Drop device_get_by_driver_info()Simon Glass2021-03-261-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function is now only used in a test. Drop it. Also drop DM_DRVINFO_GET() which was the only purpose for having the function. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | clk: sandbox: Create a special fixed-rate driverSimon Glass2021-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a version of this driver for sandbox so that it can use the of-platdata struct. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dm: test: Avoid destroying uclasses with of-platdata-instSimon Glass2021-03-261-11/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not possible to destroy the uclasses when they are created at build time. Skip this step so that SPL test can complete successfully. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | dtoc: Assign a sequence number to each nodeSimon Glass2021-03-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have the alias information we can assign a sequence number to each device in the uclass. Store this in the node associated with each device. This requires renaming the sandbox test drivers to have the right name. Note that test coverage is broken with this patch, but fixed in the next one. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-06-24 22:15:28 +0000