summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: usb: Switch to Generic host controllersJagan Teki2019-01-187-26/+0
| | | | | | | | | | | | | | Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
* reset: Add reset validJagan Teki2019-01-181-0/+11
| | | | | | | | Add reset_valid to check whether given reset is valid or not. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: A64: Update sun50i-a64-ccu.hJagan Teki2019-01-181-0/+2
| | | | | | | | | | | | | | | | | | Update sun50i-a64-ccu.h from the Linux sunxi/dt64-for-4.20 tree: commit 679294497be31596e1c9c61507746d72b6b05f26 Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz> Date: Wed Sep 26 19:48:24 2018 +0000 arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay This should be a part of previous sync patch from commit 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Author: Andre Przywara <andre.przywara@arm.com> Date: Mon Oct 29 00:56:47 2018 +0000 sunxi: A64: Update .dts/.dtsi files Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
* ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3Jagan Teki2019-01-186-0/+517
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update all A80 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. arch/arm/boot/dts/sun9i-a80*: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <arnd@arndb.de> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt include/dt-bindings/*/sun9i-a80-*: commit 783ab76ae553abc23f80ef7511052d055697531b Author: Chen-Yu Tsai <wens@csie.org> Date: Sat Jan 28 20:22:36 2017 +0800 clk: sunxi-ng: Add A80 Display Engine CCU Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same dts is not available in Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini2019-01-171-0/+2
|\ | | | | | | | | | | | | | | | | | | - MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
| * mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen2019-01-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
* | lmb: remove unused extern declarationSimon Goldschmidt2019-01-161-2/+0
| | | | | | | | | | | | | | | | lmb.h includes an extern declaration of "struct lmb lmb;" which is not used anywhere, so remove it. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | fs: prevent overwriting reserved memorySimon Goldschmidt2019-01-161-0/+2
| | | | | | | | | | | | | | | | | | This fixes CVE-2018-18440 ("insufficient boundary checks in filesystem image load") by using lmb to check the load size of a file against reserved memory addresses. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | lib: lmb: extend lmb for checks at load timeSimon Goldschmidt2019-01-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds two new functions, lmb_alloc_addr and lmb_get_unreserved_size. lmb_alloc_addr behaves like lmb_alloc, but it tries to allocate a pre-specified address range. Unlike lmb_reserve, this address range must be inside one of the memory ranges that has been set up with lmb_add. lmb_get_unreserved_size returns the number of bytes that can be used up to the next reserved region or the end of valid ram. This can be 0 if the address passed is reserved. Added test for these new functions. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dmTom Rini2019-01-154-10/+50
|\ \ | | | | | | | | | | | | | | | | | | | | | Fix recent changes to serial API for driver model Buildman clang support and a few fixes Small fixes to 'dm tree' and regmap test Improve sandbox build compatibility A few other minor fixes
| * | dm: serial: Tidy up header file commentsSimon Glass2019-01-141-3/+31
| | | | | | | | | | | | | | | | | | | | | | | | The getconfig() comment is out of date. Fix this and add comments for recently added functions. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
| * | dm: serial: Adjust serial_getinfo() to use proper APISimon Glass2019-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
| * | dm: serial: Adjust serial_setconfig() to use proper APISimon Glass2019-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
| * | dm: serial: Adjust serial_getconfig() to use proper APISimon Glass2019-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
| * | serial: Move new functions to serial.hSimon Glass2019-01-142-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | We should not be adding new functions to common.h. Move these recently added functions to serial.h. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
| * | log: Check printf() argumentsSimon Glass2019-01-141-1/+2
| | | | | | | | | | | | | | | | | | | | | At present logging does not check printf() arguments. Now that all users have been corrected, enable this to prevent further problems. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | test: dm: regmap: Fix the long test delaySimon Glass2019-01-141-1/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present one of the regmap tests takes 5 seconds to run since it waits for a timeout. This should be handled using sandbox_timer_add_offset() which advances time for test purposes. This requires a little change to make the regmap_read_poll_timeout() testable. Update the macro and the test. Fixes: ebe3497c9c ("test: regmap: add regmap_read_poll_timeout test") Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-riscvTom Rini2019-01-151-0/+2
|\ \ | | | | | | | | | | | | 1. Improve cache implementation. 2. Fix and improve standalone applications
| * | riscv: qemu: define standalone load addressLukas Auer2019-01-151-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | We need to define the standalone load address to use standalone application on qemu-riscv. Define it and set it equal to CONFIG_SYS_LOAD_ADDR. To not overwrite it, change the assigned of CONFIG_STANDALONE_LOAD_ADDR in arch/riscv/config.mk to a conditional one. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* | common: command: Add support for $ auto-completionBoris Brezillon2019-01-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | Add the dollar_complete() function to auto-complete arguments starting with a '$' and use it in the cmd_auto_complete() path such that all args starting with a $ can be auto-completed based on the available env vars. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Fix some linking problems] Signed-off-by: Tom Rini <trini@konsulko.com>
* | misc: fs_loader: Switching private data allocation to DM auto allocationTien Fong Chee2019-01-151-28/+4
| | | | | | | | | | | | | | | | | | Switching private data manual allocation to driver model auto allocation so users no longer need to deallocate themself because this would be deallocated by driver model when the device is no longer required. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | command: commands: Add macros to declare commands with subcmdsBoris Brezillon2019-01-151-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most cmd/xxx.c source files expose several commands through a single entry point. Some of them are doing the sub-command parsing manually in their do_<cmd>() function, others are declaring a table of sub-commands and then use find_cmd_tbl() to delegate the request to the sub command handler. In either case, the amount of code to do that is not negligible and repetitive, not to mention that almost no commands are implementing the auto-completion hook, which means most u-boot commands lack auto-completion. Provide several macros to easily define commands exposing sub-commands. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | common: command: Rework the 'cmd is repeatable' logicBoris Brezillon2019-01-151-4/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The repeatable property is currently attached to the main command and sub-commands have no way to change the repeatable value (the ->repeatable field in sub-command entries is ignored). Replace the ->repeatable field by an extended ->cmd() hook (called ->cmd_rep()) which takes a new int pointer to store the repeatable cap of the command being executed. With this trick, we can let sub-commands decide whether they are repeatable or not. We also patch mmc and dtimg who are testing the ->repeatable field directly (they now use cmd_is_repeatable() instead), and fix the help entry manually since it doesn't use the U_BOOT_CMD() macro. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | common: command: Expose a generic helper to auto-complete sub commandsBoris Brezillon2019-01-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Some commands have a table of sub-commands. With minor adjustments, complete_cmdv() is able to provide auto-completion for sub-commands (it's just about passing the table of commands instead of taking the global one). We rename this function into complete_subcmd() and implement complete_cmdv() as a wrapper around complete_subcmdv(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | omap3: igep00x0: Remove USB support due DM_USB deadlineEnric Balletbo i Serra2019-01-151-10/+0
| | | | | | | | | | | | | | | | | | | | The USB support for this board was never really tested, in fact, the presence of these options are more a copy & paste error from the Beagleboard than a feature that really was used. As doesn't work, remove for now. If someone at some point want to add this support he'll need to migrate the board to use CONFIG_DM_USB instead. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* | include: configs: Add gunzip size for HiKey boardManivannan Sadhasivam2019-01-141-0/+2
| | | | | | | | | | | | | | | | | | Default 8MB gunzip size is not enough to load the release kernel, hence fix 64MB size for uncompressing the kernel. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arm: MediaTek: add ethernet support for MT7629 boardsWeijie Gao2019-01-141-0/+5
| | | | | | | | | | | | | | | | Enable ethernet related configs to mt7629_rfb_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
* | arm: MediaTek: add ethernet support for MT7623 boardsWeijie Gao2019-01-141-0/+5
| | | | | | | | | | | | | | | | Enable ethernet related configs to mt7623n_bpir2_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
* | reset: MedaiTek: add reset controller driver for MediaTek SoCsWeijie Gao2019-01-141-0/+18
|/ | | | | | | This patch adds reset controller driver for MediaTek SoCs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
* imx8mq_evk_defconfig: Move file system options to KconfigFabio Estevam2019-01-141-6/+0
| | | | | | | | | | | | | | | Chris Spencer reports that when enabling ext4 read support without also enabling write support the following error is seen: fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a function); did you mean 'ext4_read_file'? .write = ext4_write_file, ^~~~~~~~~~~~~~~ Fix this problem by moving these options to Kconfig. Reported-by: Chris Spencer <spencercw@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
* poplar: save environment at a different offsetAlex Elder2019-01-141-3/+3
| | | | | | | | | | | Change CONFIG_ENV_OFFSET for Poplar to be 1MB further into the eMMC than before. This puts it immediately prior to the space we are reserving offset 0x200000-0x400000 for UEFI to save its persistent data. Define CONFIG_ENV_SIZE as a product of env_mmc_nblks and the sector size, like CONFIG_ENV_OFFSET is. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'u-boot-imx-20190110' of git://git.denx.de/u-boot-imxTom Rini2019-01-102-0/+5
|\ | | | | | | Fixes for 2019.01
| * board: tbs2910: Add u-boot.imx size limit checkSoeren Moch2019-01-091-0/+2
| | | | | | | | | | | | | | Check the size of the generated u-boot.imx file. Report an error if it would be too big and overwrite the u-boot environment. Signed-off-by: Soeren Moch <smoch@web.de>
| * arm: mx5: Enable WDT and bootcounter on M53MenloMarek Vasut2019-01-091-0/+3
| | | | | | | | | | | | | | Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | arm: ti: boot: Remove legacy Android partitionsSam Protsenko2019-01-091-6/+1
|/ | | | | | | | | | | | | | Remove unused Android partitions: - efs, crypto, cache: we don't use it anymore (images are not built in AOSP - ipu1, ipu2: IPU firmware is now a part of vendor image and doesn't reside as a separate partition While at it, rename "reserved" partition to "uboot-env", as it's actually stores U-Boot environment. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2019-01-066-12/+13
|\
| * Revert "arm: config: fix default console only to specify the device"Seung-Woo Kim2018-12-266-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 232ed3ca534708527a9515c7c41bc3542949525c. In exynos boards, ${console} is used to set bootargs but it sets without "console=", so CONFIG_DEFAULT_CONSOLE for these boards is designated with "console=" but it is removed. So revert the commit. References for using ${console} in board/samsung/common/bootscripts/autoboot.cmd board/samsung/common/bootscripts/bootzimg.cmd Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos5-dt-types: add missing dtb file for Odroid HC1/HC2Anand Moon2018-12-211-0/+1
| | | | | | | | | | | | | | | | Add missing exynos5422-odroidhc1.dtb needed to set for dfu env. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | dm: pinctrl: Add pinctrl_decode_pin_config_dm().Christoph Muellner2019-01-021-0/+12
| | | | | | | | | | | | | | | | | | pinctrl_decode_pin_config_dm() is basically a feature-equivalent implementation of pinctrl_decode_pin_config(), which operates on struct udevice devices and uses the dev_read_*() API. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini2019-01-016-2/+308
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
| * | pico-imx7d: Increase the CONFIG_ENV_OFFSET sizeFabio Estevam2019-01-011-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| * | pcm058: fix NAND flash not using badblock tableHarald Seiler2019-01-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, U-Boot ignores the BBT stored in the last 4 blocks of NAND flash because the NAND_BBT_USE_FLASH flag is not set. This leads to two issues: * U-Boot silently uses a memory-only BBT which is initialized with all blocks marked as good. This means, actual bad blocks are marked good and U-Boot might try writing to or reading from them. * The BBT in flash, which will be created once Linux boots up, is not off limits for a driver ontop, like UBI. While it does not seem to consistently produce an error, sometimes UBI will fail to attach because the BBT blocks obviously don't contain valid UBI data. To fix this, this patch sets the CONFIG_SYS_NAND_USE_FLASH_BBT option, which is used in ./drivers/mtd/nand/raw/mxs_nand.c to decide whether a BBT in flash is used. Signed-off-by: Harald Seiler <hws@denx.de>
| * | imx: add i.MX8MQ EVK supportPeng Fan2019-01-011-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | tools: add i.MX8M image supportPeng Fan2019-01-012-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX8M bootable image type is like i.MX6/7, but there is signed HDMI firmware image in front of A53 bootable image, which is also has an IVT header. Here we also include fit image to generate a bootable image. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | spl: introduce function prototypesPeng Fan2019-01-011-0/+12
| | | | | | | | | | | | | | | | | | | | | Introduce function prototypes for board_spl_fit_size_align and board_spl_fit_post_load Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | SPL: Add HAB image authentication to FITYe Li2019-01-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce two board level callback functions to FIT image loading process, and a SPL_FIT_FOUND flag to differentiate FIT image or RAW image. Implement functions in imx common SPL codes to call HAB funtion to authenticate the FIT image. Generally, we have to sign multiple regions in FIT image: 1. Sign FIT FDT data (configuration) 2. Sign FIT external data (Sub-images) Because the CSF supports to sign multiple memory blocks, so that we can use one signature to cover all regions in FIT image and only authenticate once. The authentication should be done after the entire FIT image is loaded into memory including all sub-images. We use "-p" option to generate FIT image to reserve a space for FIT IVT and FIT CSF, also this help to fix the offset of the external data (u-boot-nodtb.bin, ATF, u-boot DTB). The signed FIT image layout is as below: -------------------------------------------------- | | | | | | | | | FIT | FIT | FIT | | U-BOOT | ATF | U-BOOT | | FDT | IVT | CSF | | nodtb.bin | | DTB | | | | | | | | | -------------------------------------------------- Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | embestmx6boards: Add SPL supportFabien Lahoudere2019-01-011-0/+13
| | | | | | | | | | | | | | | | | | | | | In order to boot faster with falcon mode, we need to add SPL support to riotboard. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
* | | bootm: vxworks: Make do_bootm_vxworks() non-staticBin Meng2018-12-311-0/+2
| | | | | | | | | | | | | | | | | | | | | For future extension to other architectures, make do_bootm_vxworks() a non-static function. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | bootm: vxworks: Make do_bootvx_fdt() staticBin Meng2018-12-311-1/+0
| | | | | | | | | | | | | | | | | | | | | Change the scope of do_bootvx_fdt() to static since it is only used in common/bootm_os.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | Merge git://git.denx.de/u-boot-x86Tom Rini2018-12-312-12/+12
|\ \ \ | | | | | | | | | | | | | | | | This includes x86 edison defconfig file clean up, and coreboot file system (cbfs) fixes.
generated by cgit (git 2.34.1) at 2024-09-30 00:24:44 +0000