summaryrefslogtreecommitdiffstats
path: root/include/usb.h
Commit message (Collapse)AuthorAgeFilesLines
* dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass2020-12-131-6/+6
| | | | | | | Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass2020-12-131-1/+1
| | | | | | Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass2020-12-131-2/+2
| | | | | | | | | | We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: ci_udc: Add function to remove usb deviceYe Li2020-09-011-0/+9
| | | | | | | | | | | | When unregister gadget driver in ci_udc, the usb device is not removed or stop. This causes next "usb start" fails to work. Add a new interface "usb_remove_ehci_gadget" in usb-uclass to remove the usb device for DM driver. Using "usb_lowlevel_stop" for non-DM driver. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* usb: Update struct usb_device to indicate speed enumSimon Glass2020-05-151-1/+1
| | | | | | | The speed member actually uses an enum, so add this to the comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: Keep async schedule running only across mass storage xfersMarek Vasut2020-04-091-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than keeping the asynchronous schedule running always, keep it running only across USB mass storage transfers for now, as it seems that keeping it running all the time interferes with certain control transfers during device enumeration. Note that running the async schedule all the time should not be an issue, especially on EHCI HCD, as that one implements most of the transfers using async schedule. Note that we have usb_disable_asynch(), which however is utterly broken. The usb_disable_asynch() blocks the USB core from doing async transfers by setting a global flag. The async schedule should however be disabled per USB controller. Moreover, setting a global flag does not prevent the controller from using the async schedule, which e.g. the EHCI HCD does. This patch implements additional callback to the controller, which permits it to lock the async schedule and keep it running across multiple transfers. Once the schedule is unlocked, it must also be disabled. This thus prevents the async schedule from running outside of the USB mass storage transfers. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Tom Rini <trini@konsulko.com> Tested-by: Tom Rini <trini@konsulko.com> [omap3_beagle, previously failing]
* usb: kbd: move USB_KBD_BOOT_REPORT_SIZE to usb.hHeinrich Schuchardt2019-11-251-0/+6
| | | | | | | Move constant USB_KBD_BOOT_REPORT_SIZE. This allows us to reuse it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: Add nonblock argument to submit_int_msgMichal Suchanek2019-09-111-4/+5
| | | | | | | This will be used to implement non-blocking keyboard polling in case of errors. Signed-off-by: Michal Suchanek <msuchanek@suse.de>
* usb: usb_submit_int_msg -> usb_int_msgMichal Suchanek2019-09-111-2/+2
| | | | | | This aligns naming with usb_bulk_msg and usb_control_msg. Signed-off-by: Michal Suchanek <msuchanek@suse.de>
* usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/Sven Schwermer2018-11-261-6/+6
| | | | | | | | This allows to disable the USB driver model in SPL because it checks the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for regular non-SPL builds. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: usb: emul: Drop usb_emul_reset()Bin Meng2017-10-011-8/+0
| | | | | | | | With the root hub unbinding in usb_stop(), there is no need to do a Sandbox-specific reset operation. usb_emul_reset() is no longer used anywhere, drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* usb: emul: Expose find_descriptor() as a public APIBin Meng2017-10-011-0/+11
| | | | | | | This can be useful outside of the sandbox usb emulation uclass driver. Expose it as a public API with a proper prefix (usb_emul_). Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* usb: sandbox: Fix emulator device select logic in usb_emul_find_devnum()Bin Meng2017-10-011-2/+16
| | | | | | | | | | | | | | | | | | | | | | Current emulator select logic in usb_emul_find_devnum() is to test the USB address. The USB address of the device being enumerated is initialized to zero at the beginning of the enumeration process in usb_setup_device(). At this point, the saved USB address in the platform data has not been assigned to any valid USB address either. This means: the logic will select an emulator device according to its sequence of declaring order in the device tree. Take test.dts for example, flash-stick@0 will be selected before flash-stick@1. But unfortunately such logic is wrong. In fact USB devices show up in a random order during the enumeration which means usb_emul_find_devnum() may be called on port 3 for keyb@3 before on port 0 for flash-stick@0. To fix this, we introduce a new emulator uclass specific platdata to store the USB device's port number on its parent hub, and update the logic to test the port number instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* usb: Fix comments of usb_emul_find_for_dev()Bin Meng2017-10-011-1/+0
| | | | | | There is no such a parameter called 'bus'. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* usb: emul: Remove maxpacketsize in usb_emul_setup_device()Bin Meng2017-10-011-3/+2
| | | | | | This parameter is never used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* dm: usb: Add a new USB controller operation 'get_max_xfer_size'Bin Meng2017-09-271-1/+21
| | | | | | | The HCD may have limitation on the maximum bytes to be transferred in a USB transfer. USB class driver needs to be aware of this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* dm: usb: Add a new USB controller operation 'update_hub_device'Bin Meng2017-07-281-1/+20
| | | | | | | | | For USB host controllers like xHC, its internal representation of hub needs to be updated after the hub descriptor is fetched. This adds a new op that does this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: hub: Parse and save TT details from device descriptorBin Meng2017-07-281-0/+16
| | | | | | | | | | | | A high speed hub has a special responsibility to handle full speed/ low speed devices connected on downstream ports. In this case, the hub must isolate the high speed signaling environment from the full speed/low speed signaling environment with the help of Transaction Translator (TT). TT details are provided by hub descriptors and we parse and save it to hub uclass_priv for later use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: hub: Support 'set hub depth' request for USB 3.0 hubsBin Meng2017-07-281-0/+1
| | | | | | | | | | USB 3.0 hub uses a hub depth value multiplied by four as an offset into the 'route string' to locate the bits it uses to determine the downstream port number. We shall set the hub depth value of a USB 3.0 hub after it is configured. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: hub: Add a new API to test if a hub device is root hubBin Meng2017-07-281-0/+8
| | | | | | | | | | | Sometimes we need know if a given hub device is root hub or not. Add a new API to test this. This removes the xHCI driver's own version is_root_hub() and change to use the new API. While we are here, remove the unused/commented out get_usb_device() in the xHCI driver too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* usb: hub: Remove hub_port_reset()Bin Meng2017-07-281-18/+0
| | | | | | | | | | | | At present hub_port_reset() is defined in DM USB, but it is never called hence remove it (removing another ifdefs). While we are here, change legacy_hub_port_reset() name to usb_hub_port_reset() to better match other function names in the same hub module. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: hub: Change USB hub descriptor to match USB 3.0 hubsBin Meng2017-07-281-4/+14
| | | | | | | | | | | | USB 3.0 hubs have a slightly different hub descriptor than USB 2.0 hubs, with a fixed (rather than variable length) size. Change the host controller drivers that access those last two fields (DeviceRemovable and PortPowerCtrlMask) to use the union. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
* Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCDTom Rini2017-05-151-1/+2
| | | | | | | | | | In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dm: usb: Drop the get_dev() functionSimon Glass2016-05-171-1/+0
| | | | | | This function is implemented by the legacy block functions now. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Fix spelling of "transferred".Vagrant Cascadian2016-03-221-2/+2
| | | | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: Change power-on / scanning timeout handlingStefan Roese2016-03-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the USB port scanning procedure and timeout handling in the following ways: a) The power-on delay in usb_hub_power_on() is now reduced to a value of max(100ms, "hub->desc.bPwrOn2PwrGood * 2"). The code does not wait using mdelay, instead usb_hub_power_on() will wait before querying the device in the scanning loop later. The total timeout for this hub, which is 1 second + "hub->desc.bPwrOn2PwrGood * 2" is calculated and will be used in the following per-port scanning loop as the timeout to detect active USB devices on this hub. b) Don't delay the minimum delay (for power to stabilize) in usb_hub_power_on(). Instead skip querying these devices in the scannig loop until the delay time is reached. c) The ports are now scanned in a quasi parallel way. The current code did wait for each (unconnected) port to reach its timeout and only then continue with the next port. This patch now changes this to scan all ports of all USB hubs quasi simultaneously. For this, all ports are added to a scanning list. This list is scanned until all ports are ready by either a) reaching the connection timeout (calculated earlier), or by b) detecting a USB device. This results in a faster USB scan time as the recursive scanning of USB hubs connected to the hub that's currently being scanned will start earlier. One small functional change to the original code is, that ports with overcurrent detection will now get rescanned multiple times (PORT_OVERCURRENT_MAX_SCAN_COUNT). Without this patch: starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 9 USB Device(s) found time: 20.163 seconds With this patch: starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 9 USB Device(s) found time: 1.822 seconds So ~18.3 seconds of USB scanning time reduction. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-141-1/+1
| | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* usb: Allow up to 7 storage devicesSimon Glass2016-01-071-1/+1
| | | | | | | | | | | The current limit of 5 is not enough for the driver model USB tests. Really we should not have a limit but the driver model code still uses the usb_dev_desc[] array, which has a limit. Increasing the limit by 2 should not bother anyone. Adjust it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: Move determination of TT hub address/port into separate functionStefan Brüns2015-12-311-0/+12
| | | | | | | | | | | | | Start split and complete split tokens need the hub address and the downstream port of the first HS hub (device view). The core of the function was duplicated in both host/ehci_hcd and musb-new/usb-compat.h. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
* usb: Alloc buffer for USB descriptor dynamicallyStefan Brüns2015-12-311-2/+3
| | | | | | | | | The configuration descriptor includes all interface, endpoint and auxiliary descriptors (e.g. report, union) so 512 bytes may not be enough. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: sandbox: Add support for interrupt operationsSimon Glass2015-11-191-0/+11
| | | | | | | Allow USB device emulation to support interrupt URBs so that we can use USB keyboards with sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: usb: Allow finding a USB emulator for a deviceSimon Glass2015-11-191-0/+10
| | | | | | | | Each USB device has an emulator. Currently this can only be found by supplying the 'pipe' value, which contains the device number. Add a way to find it directly from the emulated device. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: Refactor USB tree output code for testingSimon Glass2015-11-191-0/+8
| | | | | | | Allow the 'usb tree' command to be used from test code, so that we can verify that it works correctly. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Rename dev_get_parentdata() to dev_get_parent_priv()Simon Glass2015-10-231-1/+1
| | | | | | | | The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski2015-08-051-2/+2
| | | | | | | | | USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* dm: usb: Adjust the USB_DEVICE() macro namingSimon Glass2015-07-211-1/+17
| | | | | | | | | In Linux USB_DEVICE() is used to declare a USB device by vendor/device ID. We should follow the same convention in U-Boot. Rename the existing USB_DEVICE() macro to U_BOOT_USB_DEVICE() and bring in the USB_DEVICE() macro from Linux for use in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: usb: Correct the struct usb_driver_entry commentSimon Glass2015-07-211-2/+2
| | | | | | | The function documentation is incorrect. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* dm: usb: Allow usb host drivers to implement usb_reset_root_portHans de Goede2015-07-211-0/+5
| | | | | | | | | Allow usb uclass host drivers to implement usb_reset_root_port, this is used by single port usb hosts which do not emulate a hub, such as otg controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* usb: Add an usb_device parameter to usb_reset_root_portHans de Goede2015-07-211-6/+2
| | | | | | | | | | | Add an usb_device parameter to usb_reset_root_port so that it knows which root-port it is resetting. This is necessary for proper device-model support for usb_reset_root_port. Also remove a duplicate declaration of usb_reset_root_port() from usb.h . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* usb: usb_setup_device: Drop unneeded portnr function argumentHans de Goede2015-07-211-3/+3
| | | | | | | | Drop the unneeded portnr function argument, the portnr is part of the usb_device struct which is passed via the dev argument. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* usb: Drop device-model specific copy of usb_legacy_port_resetHans de Goede2015-07-211-8/+0
| | | | | | | | | | | | | | | The device-model usb_legacy_port_reset function calls the device-model usb_port_reset function which is a 1 on 1 copy of the non dm usb_legacy_port_reset and this is the only use of usb_port_reset in all of u-boot. Drop both, and alway use the usb_legacy_port_reset() version in common/usb.c . Also while at it make it static as it is only used in common/usb.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* usb.h: Always declare usb function prototypesHans de Goede2015-06-191-15/+0
| | | | | | | | | | | | | | | There is no harm in declaring the function prototypes even if nothing implements them, and when CONFIG_DM_USB=y the various usb functions are available regardless of any controller drivers being enabled. This fixes compile warnings due to missing prototypes on ARCHs where the ARCH Kconfig always enables CONFIG_DM_USB and various usb drivers. One could argue that in the case of no controllers CONFIG_DM_USB should not be set, but this problem is typically seen during bringup of boards which do actually have usb controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* usb: add device connection/disconnection detectionVincent Palatin2015-05-141-0/+2
| | | | | | | | | | | | Provide a function to detect USB device insertion/removal in order to avoid having to do USB enumeration in a tight loop when trying to detect peripheral hotplugging. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: usb: Add support for companion controllersHans de Goede2015-05-141-0/+3
| | | | | | | | | | | | | | USB companion controllers must be scanned after the main controller has been scanned, so that any devices which the main controller which to hand over to the companion have actually been handed over before we scan the companion. As there are no guarantees that this will magically happen in the right order, split the scanning of the buses in 2 phases, first main controllers, and then companion controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: usb: Add support for interrupt queues to the dm usb codeHans de Goede2015-05-141-1/+47
| | | | | | | | | | | | | | | Interrupt endpoints typically are polled for a long time by the usb controller before they return anything, so calls to submit_int_msg() can take a long time to complete this. To avoid this the u-boot code has the an interrupt queue mechanism / API, add support for this to the driver-model usb code and implement it for the dm ehci code. See the added doc comments for more details. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: usb: Copy over usb_device values from usb_scan_device() to final usb_deviceHans de Goede2015-05-051-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we copy over a number of usb_device values stored in the on stack struct usb_device probed in usb_scan_device() to the final driver-model managed struct usb_device in usb_child_pre_probe() through usb_device_platdata, and then call usb_select_config() to fill in the rest. There are 3 problems with this approach: 1) It does not fill in enough fields before calling usb_select_config(), specifically it does not fill in ep0's maxpacketsize causing a div by zero exception in the ehci driver. 2) It unnecessarily redoes a number of usb requests making usb probing slower 3) Calling usb_select_config() a second time fails on some usb-1 devices plugged into usb-2 hubs, causing u-boot to not recognize these devices. This commit fixes these issues by removing (*) the usb_select_config() call from usb_child_pre_probe(), and instead of copying over things field by field through usb_device_platdata, store a pointer to the in stack usb_device (which is still valid when usb_child_pre_probe() gets called) and copy over the entire struct. *) Except for devices which are explictly instantiated through device-tree rather then discovered through usb_scan_device() such as emulated usb devices in the sandbox. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: usb: Make usb_get_bus easier to use for callersHans de Goede2015-05-051-4/+3
| | | | | | | | | | | Make usb_get_bus easier to use for callers, by directly returning the bus rather then returning it via a pass-by-ref argument. This also removes the error checking from the current callers, as we already have an assert() for bus not being NULL in usb_get_bus(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: usb: sandbox: Add a uclass for USB device emulationSimon Glass2015-04-181-1/+63
| | | | | | | | | | With sandbox we want to be able to emulate USB devices so that we can test the USB stack. Add a uclass to support this. It implements the same operations as a normal USB device driver, but in this case passes them on to an emulation driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* dm: usb: Allow USB drivers to be declared and auto-probedSimon Glass2015-04-181-0/+107
| | | | | | | | | | | | | | | | | | | | | | | | | USB devices in U-Boot are currently probed only after all devices have been enumerated. Each type of device is probed by custom code, e.g.: - USB storage - Keyboard - Ethernet With driver model this approach doesn't work very well. We could build a picture of the bus and then go back and add the devices later, but this means that the data structures are incomplete for quite a while. It also does not follow the model of being able to bind a device when we discover it. We would prefer to have devices automatically be bound as the device is enumerated. This allows us to attach drivers to particular USB classes or product/vendor IDs. This is the method used by Linux. Add the required #defines from Linux, a way of declaring a USB driver and the logic to locate the correct driver given the USB device's descriptors. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
generated by cgit (git 2.34.1) at 2024-06-28 12:26:17 +0000