summaryrefslogtreecommitdiffstats
path: root/include/configs/mx6cuboxi.h
Commit message (Collapse)AuthorAgeFilesLines
* env: Finish migration of common ENV optionsTom Rini2019-11-201-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass2019-08-021-12/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOTSimon Glass2019-08-021-0/+1
| | | | | | | In order to use CONFIG_PREBOOT with Kconfig, CONFIG_USE_PREBOOT must be defined for each board. To prepare for conversion to Kconfig, add this. Signed-off-by: Simon Glass <sjg@chromium.org>
* imx: move CONFIG_VIDEO_IPUV3 to defconfigsAnatolij Gustschin2019-04-131-1/+0
| | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Convert CONFIG_MII et al to KconfigAdam Ford2018-08-171-1/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-161-1/+0
| | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6cuboxi: Move the default environment for all devicesJon Nettleton2018-07-231-1/+1
| | | | | | | | | | | | | | | Previously we had stored the environment right after the u-boot.img on the disk. I never liked this because with dtbs being included and such the image could grow in size. Instead we move the environment to be negatively offset from the 1MB mark. Almost all our images start at 4MB's, and most standard images start at 1MB, and all our storage devices are a minimum 1MB. Therefore we can store env there for all classes of devices and have plenty of space in case u-boot.img needs to grow. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6cuboxi: Add emmc device tree suffixJon Nettleton2018-07-231-10/+14
| | | | | | | | | | Mainline and now the SolidRun 4.9 nxp based tree use the new reorganization of device-tree files that separate out the emmc into its own dtb. u-boot will now look for -emmc in the device tree name if one is detected. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
* mx6cuboxi: drop CONFIG_SYS_FSL_USDHC_NUMBaruch Siach2018-07-231-1/+0
| | | | | | This macro is not used. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
* mx6cuboxi: consolidate board detection and add som revision checkingJon Nettleton2018-06-181-12/+12
| | | | | | | | | | | | | In order to properly detect the board the checks need to be done in a specific order. Move these tests back into a single enum function that will always return the proper the board it is checking. This also adds the best test we have for detecting the rev 1.5 som, and it simplifies the device-tree filename building. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to KconfigAlex Kiernan2018-04-081-1/+0
| | | | | | | | | Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
* Remove config_distro_defaults.hAdam Ford2018-02-231-1/+0
| | | | | | | With the contents of config_distro_defaults.h migrated to Kconfig, we can remove this header file completely Signed-off-by: Adam Ford <aford173@gmail.com>
* ata: Migrate CONFIG_LIBATA to KconfigTuomas Tynkkynen2017-12-121-1/+0
| | | | | | | | This symbol enables some library code used by various SATA drivers, so make this a non-user-visible symbol select'ed by the respective drivers, and let moveconfig handle the rest. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* ata: Migrate CONFIG_DWC_AHSATA to KconfigTuomas Tynkkynen2017-12-121-1/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMANDTom Rini2017-11-171-5/+0
| | | | | | | | | | | We first introduce CONFIG_USE_BOOTCOMMAND, similar to CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most CONFIG_DISTRO_DEFAULT users. In some cases platforms have a complex scheme around this usage, and these have been defered for the moment so that platform maintainers can work on a migration plan. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* detect and setup solidrun hummingboard2Dennis Gilmore2017-09-201-0/+4
| | | | | | | | | | | The hummingboard2 is slightly different to the cubox i and to the hummingboard. The GPIO pin info to probe came from solidruns for of u-boot on github. https://github.com/SolidRun/u-boot-imx6/blob/imx6/board/solidrun/mx6_cubox-i/mx6_cubox-i.c#L569-L589 I have tested on a hummingboard-edge witha imx6 solo and 512mb of ram. Signed-off-by: Dennis Gilmore <dgilmore@redhat.com>
* ipu_common: Let the MX6 IPU clock be calculated in run-timeFabio Estevam2017-09-111-1/+0
| | | | | | | | | | | | | | | | | | MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz. When running a SPL target, which supports multiple MX6 variants we cannot properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as such decision is done in build-time currently. Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be configured in run-time on mx6. Reported-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stefano Babic <sbabic@denx.de> [agust: fixed #endif in cgtqmx6eval.h] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* configs: Migrate all of the existing USB symbols, except fastbootTom Rini2017-09-011-1/+0
| | | | | | | | | | | | This syncs all of the currently Kconfig'd symbols out of the headers and into the defconfig files. This has two exceptions, first am335x_evm needs to be converted to DM in SPL and then it can stop undef'ing CONFIG_DM_USB. Leaving this as-is results in a build failure, and without work, run time failure. The other case is am43xx_evm.h and in turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB host mode in SPL, but still desire to have gadget mode in U-Boot proper. Signed-off-by: Tom Rini <trini@konsulko.com>
* Move PHYLIB to KconfigAlexandru Gagniuc2017-08-071-1/+0
| | | | | Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigSimon Glass2017-07-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6cuboxi: Move CONFIG_CMD_SATA to KconfigFabio Estevam2017-07-141-1/+0
| | | | | | | | | | | | | | | Move CONFIG_CMD_SATA option to Kconfig to fix the following build error: In file included from include/configs/mx6cuboxi.h:137:0, from include/config.h:7, from include/common.h:21, from common/env_common.c:11: include/config_distro_bootcmd.h:161:2: error: expected '}' before 'BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA' BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6cuboxi: Use PARTUUID to specify the rootfs locationFabio Berton2017-07-121-0/+2
| | | | | | | | | | | | | | | | | Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the eMMC changes depending on the kernel version. In order to avoid such issue, use UUID method to specify the rootfs location. This change was made based on U-Boot commit: - ca4f338e2efece5196eb2178e5f7d07be828da6e Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6cuboxi: Add support for sataPeter Robinson2017-07-121-0/+12
| | | | | | | | | | | The Cubox-i and Hummingboard series of devices have an option of SATA on board, and depending on how the fuses are blown even the option to boot SPL from SATA. So enable support for it so it can be used to boot the OS from if people desire. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* Convert CONFIG_CMD_HDMIDETECT to KconfigSimon Glass2017-05-221-1/+0
| | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HDMIDETECT Note that we cannot do 'default y if VIDEO' because this option is only enabled for a small subset of mx6 boards. Also this command is is not a great implementation (it doesn't use driver model). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Kconfig: USB: Migrate existing USB_EHCI_xxx optionsTom Rini2017-05-151-1/+0
| | | | | | | | | | | | | | | | | | The following options are migrated over fully now: - USB_EHCI_ATMEL - USB_EHCI_MARVELL - USB_EHCI_MX6 - USB_EHCI_MX7 - USB_EHCI_MSM - USB_EHCI_ZYNQ - USB_EHCI_GENERIC This also requires fixing the depends on USB_EHCI_MARVELL as it's used by Orion5X and Kirkwood as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
* Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to KconfigTom Rini2017-05-151-1/+0
| | | | | | | | | | Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
* Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCDTom Rini2017-05-151-1/+1
| | | | | | | | | | In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
* Set console speed to 115200 on mx6cuboxi.Vagrant Cascadian2017-04-121-1/+1
| | | | | | | | | By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass2017-01-251-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
* config: Move CONFIG_BOARD_LATE_INIT to defconfigsJagan Teki2017-01-211-1/+0
| | | | | Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
* Convert CONFIG_USB_KEYBOARD to KconfigSimon Glass2016-10-231-1/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_USB_KEYBOARD Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup MPC86* configs] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_VGA_AS_SINGLE_DEVICE to KconfigSimon Glass2016-10-231-1/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_VGA_AS_SINGLE_DEVICE Once we migrate to driver model for video, we should be able to drop this option. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_CFB_CONSOLE to KconfigSimon Glass2016-10-231-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_CFB_CONSOLE Signed-off-by: Simon Glass <sjg@chromium.org>
* config: Drop CONFIG_CONSOLE_DEVSimon Glass2016-10-231-2/+2
| | | | | | | | This is not really a config. Rename it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to KconfigSimon Glass2016-10-231-2/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_VIDEO to KconfigSimon Glass2016-10-231-1/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_VIDEO Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* Convert CONFIG_SPL_MMC_SUPPORT to KconfigSimon Glass2016-09-161-1/+0
| | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SPL_LIBCOMMON_SUPPORT to KconfigSimon Glass2016-09-161-1/+0
| | | | | | Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
* configs: Migrate CONFIG_USB_STORAGETom Rini2016-09-091-1/+0
| | | | | | | In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync with cmd/KconfigTom Rini2016-04-251-1/+0
| | | | | | | Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync almost all of cmd/KconfigTom Rini2016-04-251-3/+0
| | | | | | | | This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
* imx6: fix warnings due to switch to distro environmentStefano Babic2015-11-131-1/+1
| | | | | | | | | | wandboard and mx6cuboxi have warnings because BOOT_DELAY is defined twice. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Vagrant Cascadian <vagrant@debian.org> CC: Otavio Salvador <otavio@ossystems.com.br> CC: Fabio Estevam <fabio.estevam@freescale.com>
* arm: imx: Switch mx6cuboxi to use config_distro_bootcmd.h.Vagrant Cascadian2015-11-121-64/+24
| | | | | | | | | | This allows for more flexible and standardized boot across multiple platforms. Remove redundant legacy boot environment. Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
* thermal: imx_thermal: rework driver to be reusedAdrian Alonso2015-09-131-1/+1
| | | | | | | | Rework imx_thermal driver to be used across i.MX processor that support thermal sensor Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx6: standardise OCOTP and fuse config to mx6_commonPeter Robinson2015-07-101-2/+0
| | | | | | | | | According to README.mxc_ocotp the OCOTP is a stanard i.MX6 SoC feature so centralise the config in mx6_common.h so functionality is standard across all boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6cuboxi: drop options that are duplicated in mx6_commonPeter Robinson2015-06-271-8/+0
| | | | | | | These options were merged into mx6_common and were seemingly missed in mx6cuboxi so drop the duplicates Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* net: Move the CMD_NET config to defconfigsJoe Hershberger2015-06-011-1/+0
| | | | | | | | | | | This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* Move setexpr to KconfigJoe Hershberger2015-06-011-1/+0
| | | | | | | | | | | Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* mx6: standardise CONFIG_CMD_CACHEPeter Robinson2015-05-261-2/+0
| | | | | | | Move CONFIG_CMD_CACHE to mx6_common and standardise the way it's defined. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
generated by cgit (git 2.34.1) at 2024-11-19 06:26:24 +0000