summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3
Commit message (Collapse)AuthorAgeFilesLines
...
* usb: dwc3-generic: add a new host driver that uses the dwc3 coreJean-Jacques Hiblot2019-10-242-2/+54
| | | | | | | | | | | | | | | | | | Currently the host driver used by dwc3-generic is "xhci-dwc3". This is a functional driver but it doesn't use the dwc3 core and, in particular, it lacks some bits that may be important. For example on the k2 platforms, it is important that the phy are properly suspended when the USB is not used anymore. The dwc3 core also has a partial support for quirks. The new driver can be used as a drop-in replacement for "xhci-dwc3". In terms of implementation, it may seem strange that 2 private structures dwc3_generic_host_priv and dwc3_generic_priv) are used. The reason for this is simply that the xhci layer expects a struct xhci_ctrl at the beginning of the private data and it seemed wasteful to include it also for the peripheral case. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: dwc3-generic: factorize codeJean-Jacques Hiblot2019-10-241-20/+35
| | | | | | | Factor code for re-usability. This is another step toward adding host support. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: dwc3-generic: use platdataJean-Jacques Hiblot2019-10-241-14/+23
| | | | | | | Separate platform data from the private data. This is one step toward adding host support. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: dwc3: always use the inlined version of dwc3_host_init/dwc3_host_exitJean-Jacques Hiblot2019-10-241-5/+0
| | | | | | | | | No one is actually implementing those functions. We could remove calls to these altogether, but it does not really hurt to keep the empty inlined version at the moment and it satisfies a symmetry with the gadget mode. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: dwc3: switch to peripheral mode when exitingJean-Jacques Hiblot2019-10-241-0/+13
| | | | | | | | This allow the phy to enter idle and then suspend. the K2 platforms require the PHY to be suspended before the USB domain clock can be turned off. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* drivers: usb: dwc3: setup phy before dwc3 core soft resetT Karthik Reddy2019-10-081-2/+2
| | | | | | | | | Phy setup should be done before dwc3 soft core reset as it is done in linux & this fixes unreliable detection of usb cable on host side. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glueJean-Jacques Hiblot2019-07-051-1/+1
| | | | | | | | | dwc3-generic has been broken since MISC uclass has been modified to scan DT sub-nodes after bind. Fixing it by a using the no-op uclass. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callbackJean-Jacques Hiblot2019-07-051-1/+1
| | | | | | There is simply no reason to do that here. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: dwc3: Add Meson G12A USB GlueNeil Armstrong2019-05-093-0/+465
| | | | | | | | | | | | | | | | | | | | | Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
* dwc3-generic: Add support for the am437xJean-Jacques Hiblot2018-12-141-0/+1
| | | | | Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"Jean-Jacques Hiblot2018-12-141-0/+1
| | | | | Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: composite: Move bitmap related operations to ./include/linux/bitmap.hLukasz Majewski2018-12-142-2/+0
| | | | | | | | | | | | The BITMAP related operations can now be moved to ./include/linux/bitmap.h file to mimic the Linux kernel directory tree. This change also allows to remove the lin_gadget_compat.h header file (which is a legacy code only for composite U-boot layer). It was also possible to remove #includes from several USB gadget drivers. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
* dwc3-generic: Add support for the TI DWC3 glueJean-Jacques Hiblot2018-12-071-0/+85
| | | | Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: dwc3: Fix a compilation error with the edison defconfigJean-Jacques Hiblot2018-12-071-1/+1
| | | | | | | | | | | | | | The error is: In file included from include/part.h:10:0, from include/usb.h:18, from include/linux/usb/gadget.h:22, from drivers/usb/dwc3/ep0.c:20: include/ide.h:62:14: error: unknown type name ‘uchar’ void ide_led(uchar led, uchar status); Fixing it by including common.h that defines the uchar type. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* dwc3-generic: Add select_dr_mode operationJean-Jacques Hiblot2018-12-071-0/+26
| | | | | | | | The select_dr_mode operation is executed when the glue driver is probed. The role of this optional function is to configure the operating mode of the controller at the glue level. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* dwc3-generic: Handle the PHYs, the clocks and the reset linesJean-Jacques Hiblot2018-12-072-29/+137
| | | | | | | | This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* dm: usb: create a new UCLASS ID for USB gadget devicesJean-Jacques Hiblot2018-12-071-1/+1
| | | | | | | | | | | UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host controllers, not gadget devices. Adding a new UCLASS for gadget devices alone. Also move the generic DM code for USB gadgets in a separate file for clarity. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* dwc3: move phy operation to core.cJean-Jacques Hiblot2018-12-071-2/+86
| | | | | | | | | | | Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c
* dwc3_generic: do not probe the USB device driver when it's boundJean-Jacques Hiblot2018-12-071-7/+0
| | | | | | The driver will be probed when usb_gadget_initialize() is called. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb: udc: implement DM versions of ↵Jean-Jacques Hiblot2018-12-071-12/+2
| | | | | | | | | | | | | usb_gadget_initialize()/_release()/_handle_interrupt() When DM_USB_GADGET the platform code for the USB device must be replaced by calls to a USB device driver. usb_gadget_initialize() probes the USB device driver. usb_gadget_release() removes the USB device driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* usb: introduce a separate config option for DM USB deviceJean-Jacques Hiblot2018-12-072-4/+3
| | | | | | | | Using CONFIG_DM_USB for this purpose prevents using DM_USB for host and not for device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/Sven Schwermer2018-11-262-2/+2
| | | | | | | | This allows to disable the USB driver model in SPL because it checks the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for regular non-SPL builds. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* drivers: cosmetic: Convert SPDX license tags to Linux Kernel stylePatrick Delaunay2018-10-281-1/+1
| | | | | | | | | Complete in the drivers directory the work started with commit 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style"). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* bug.h: introduce WARN_ONCERamon Fried2018-06-071-1/+0
| | | | | | | | | | | Add WARN_ONCE definition to allow single time notification of warnings to the user. Taken from Linux kernel (4.17) with slight changes (Removed __section(.data.once)) Signed-off-by: Ramon Fried <ramon.fried@gmail.com> [trini: Drop the musb and dwc3 compat versions] Signed-off-by: Tom Rini <trini@konsulko.com>
* drivers: usb: dwc3: remove devm_zalloc from linux_compactMugunthan V N2018-05-184-8/+8
| | | | | | | | devm_zalloc() is already defined in dm/device.h header, so devm_zalloc can be removed from linux_compact.h beader file. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* usb: dwc3: Add generic DWC3 glue logic driverMichal Simek2018-05-183-0/+164
| | | | | | | | | By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* usb: dwc3: Add dwc3_init/remove with DM_USBMugunthan V N2018-05-183-1/+62
| | | | | | | | | | | The patch is preparing dwc3 core for enabling DM_USB with peripheral driver with using driver model support. The driver will be bound by the DWC3 wrapper driver based on the dr_mode device tree entry. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> (Remove dwc3-omap changes) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-0712-25/+12
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h>Masahiro Yamada2017-10-151-1/+1
| | | | | | | | Including <common.h> pulls in a lot of bloat. What this driver needs is BIT(), so replace it with <linux/bitops.h> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marek Vasut <marex@denx.de>
* bug.h: move runtime BUG/WARN macros into <linux/bug.h>Masahiro Yamada2017-10-041-1/+0
| | | | | | | Collect runtime BUG/WARN into a self-contained header <linux/bug.h> to make these macros easier to use. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* printk: collect printk stuff into <linux/printk.h> with loglevel supportMasahiro Yamada2017-10-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we import code from Linux, with regular re-sync planned, we want to use printk() and pr_*(). U-Boot does not support them in a clean way. So, people end up with local macros, or compat headers here and there, then we occasionally see build errors of definition conflicts. We have include/linux/compat.h, but putting all sorts of unrelated things into a single header is just a temporal workaround. Hence this patch, to find the best home for all printk variants. If you want to use printk() and friends, please include <linux/printk.h>. This header is self-contained, and pulls in only a few headers. When I was testing this clean-up, I noticed the image size exceeded its platform limit on some boards. This is because all pr_*() that were previously defined as no-op in include/linux/mtd/mtd.h (unless CONFIG_MTD_DEBUG is set), are now enabled. To make such boards happy, this commit also implements CONFIG_LOGLEVEL. The concept is similar to the kernel parameter "loglevel". (Actually, the Kconfig help message was taken from kernel-paremeter.txt of Linux) Messages with a loglevel smaller than console loglevel will be printed. The difference is the loglevel is build-time determined. To save the image size, lower priority pr_*() are compiled out. I set the default of CONFIG_LOGLEVEL to 6, i.e. pr_notice and higher priority messages are compiled in. I adjusted CONFIG_LOGLEVEL to avoid build error for some boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add in SPL_LOGLEVEL that is the same as LOGLEVEL] Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: add UniPhier specific glue layerMasahiro Yamada2017-10-013-0/+128
| | | | | | | | Add UniPhier platform specific glue layer to support USB3 Host mode on Synopsys DWC3 IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: dwc3: fix Kconfig dependency to accept host driver in drivers/usb/dwc3Masahiro Yamada2017-08-281-2/+2
| | | | | | | | | | | We see the choice of USB_DWC3_HOST / _GADGET in drivers/usb/dwc3/Kconfig, but we can not choose USB_DWC3_HOST unless USB_GADGET is defined. This is strange. Loosen the "depends on" and also move "select USB_GADGET_DUALSPEED" to the correct place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* usb: dwc3: gadget: make cache-maintenance on event buffers more robustPhilipp Tomsich2017-04-142-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merely using dma_alloc_coherent does not ensure that there is no stale data left in the caches for the allocated DMA buffer (i.e. that the affected cacheline may still be dirty). The original code was doing the following (on AArch64, which translates a 'flush' into a 'clean + invalidate'): # during initialisation: 1. allocate buffers via memalign => buffers may still be modified (cached, dirty) # during interrupt processing 2. clean + invalidate buffers => may commit stale data from a modified cacheline 3. read from buffers This could lead to garbage info being written to buffers before reading them during even-processing. To make the event processing more robust, we use the following sequence for the cache-maintenance: # during initialisation: 1. allocate buffers via memalign 2. clean + invalidate buffers (we only need the 'invalidate' part, but dwc3_flush_cache() always performs a 'clean + invalidate') # during interrupt processing 3. read the buffers (we know these lines are not cached, due to the previous invalidation and no other code touching them in-between) 4. clean + invalidate buffers => writes back any modification we may have made during event processing and ensures that the lines are not in the cache the next time we enter interrupt processing Note that with the original sequence, we observe reproducible (depending on the cache state: i.e. running dhcp/usb start before will upset caches to get us around this) issues in the event processing (a fatal synchronous abort in dwc3_gadget_uboot_handle_interrupt on the first time interrupt handling is invoked) when running USB mass storage emulation on our RK3399-Q7 with data-caches on. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* usb: dwc3: ensure consistent types for dwc3_flush_cachePhilipp Tomsich2017-04-143-11/+11
| | | | | | | | | | | | | | The dwc3_flush_cache() call was declared and used inconsistently: * The declaration assumed 'int' for addresses (a potential issue when running in a LP64 memory model). * The invocation cast the address to 'long'. This change ensures that both the declaration and usage of this function consistently uses 'uintptr_t' for correct behaviour even when the allocated buffers (to be flushed) reside outside of the lower 32bits of memory. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* usb: dwc3: gadget: Remove unused header inclusionVincent Tinelli2017-02-261-1/+0
| | | | | | | Remove sys_proto.h inclusion which is not used by the driver. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XXNishanth Menon2016-12-031-2/+2
| | | | | | | | | | | CONFIG_AM57XX is just an unnecessary macro that is redundant given So, remove the same instead of spreading through out the u-boot source code and getting in the way to maintain common code for DRA7x family. Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: Makefile: Don't build gadget code if USB_GADGET is disabledRoger Quadros2016-05-271-1/+1
| | | | | | | It is pointless to build gadget driver if USB_GADGET is disabled. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to KconfigSam Protsenko2016-04-201-0/+17
| | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_OMAP to KconfigSam Protsenko2016-04-201-0/+10
| | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to KconfigSam Protsenko2016-04-201-0/+23
| | | | | | Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada2016-01-252-2/+1
| | | | | | | | | | | | | | | | BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: fix build warningsFelipe Balbi2015-12-072-2/+2
| | | | | | | | | | | | | | fix the following build warnings: drivers/usb/dwc3/core.c: In function ‘dwc3_uboot_init’: drivers/usb/dwc3/core.c:625:6: warning: ‘dev’ is used uninitialized in this function [-Wuninitialized] mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); ^ drivers/usb/dwc3/dwc3-omap.c: In function ‘dwc3_omap_uboot_init’: drivers/usb/dwc3/dwc3-omap.c:380:7: warning: ‘dev’ is used uninitialized in this function [-Wuninitialized] omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); Signed-off-by: Felipe Balbi <balbi@ti.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-101-0/+4
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: Fix warnings on 64-bit buildsMichal Simek2015-11-034-15/+16
| | | | | | | Change aritmentics to use 64bit types to be compatible with 64bit builds. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* linux, compat: add missing definitions for ubiHeiko Schocher2015-10-261-5/+0
| | | | | | | | | | | | add missing definitions for the ubi/ubifs sync with linux 4.2, also change "#define kfree ..." into a static inline, so prevent ubi compile error: CC drivers/mtd/ubi/fastmap.o drivers/mtd/ubi/fastmap.c: In function 'scan_pool': drivers/mtd/ubi/fastmap.c:475:3: error: called object 'free' is not a function Signed-off-by: Heiko Schocher <hs@denx.de>
* TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xxKishon Vijay Abraham I2015-08-281-4/+11
| | | | | | | | Added support to power on/power off the second USB PHY present in DRA7xx and AM57xx. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interruptsKishon Vijay Abraham I2015-08-281-18/+28
| | | | | | | | | | Writing "0x00" to the USBOTGSS_IRQENABLE_SET_MISC and USBOTGSS_IRQENABLE_SET_0 doesn't disable the interrupts. Used USBOTGSS_IRQENABLE_CLR_MISC and USBOTGSS_IRQENABLE_CLR_0 instead. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* samsung: usb: phy: Support for DWC3 PHYLukasz Majewski2015-06-082-0/+79
| | | | | | | | | | | New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have been added to u-boot to provide proper PHY handling at Exynos5 SoCs. This code is used thereafter in the board_usb_init() call. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
generated by cgit (git 2.34.1) at 2025-09-03 10:43:18 +0000