summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* arm: stm32: add new architecture for STM32MP familyPatrick Delaunay2018-03-191-1/+1
| | | | | | | | | | | - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* microblaze: Added Kconfig support for CONFIG_XILINX_GPIOVipul Kumar2018-03-011-0/+5
| | | | | | | | | This patch added Kconfig support for CONFIG_XILINX_GPIO and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Convert CONFIG_MXC_GPIO to KconfigAdam Ford2018-02-081-0/+5
| | | | | | | This converts the following to Kconfig: CONFIG_MXC_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
* gpio: mpc8xxx: Rename Kconfig option, structures, and functionsMario Six2018-01-281-6/+3
| | | | | | | | Rename the Kconfig option, structures (and their members), as well as functions of the mpc85xx driver to include mpc8xxx to reflect the more generic usage. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* gpio/hsdk: Depend on DM_GPIO instead of simple DMAlexey Brodkin2017-12-121-1/+1
| | | | | | | | | | | | | | | | This driver really is DM GPIO one and so we need to have a correct dependency, because DM alone doesn't provide required for CMD_GPIO call and we're seeing build failures like this: ---------------------->8--------------------- cmd/built-in.o: In function 'do_gpio': .../cmd/gpio.c:188: undefined reference to 'gpio_request' ... ---------------------->8--------------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eugeniy Paltsev <paltsev@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARC: HSDK: introduce CREG GPIO driverEugeniy Paltsev2017-11-241-0/+7
| | | | | | | The HSDK can manage some pins via CREG registers block. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* gpio: rmobile: Add Renesas RCar GPIO driverMarek Vasut2017-09-281-0/+6
| | | | | | | | | | | | Add GPIO driver for the Renesas RCar SoCs . The driver currently supports only the RCar Gen3 R8A7795 and R8A7796 SoCs, but is easily extensible for the other RCar SoCs as well. This driver is meant to replace the pinmux part of SH_GPIO_PFC driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Convert CONFIG_CMD_TCA642X to KconfigSimon Glass2017-08-111-0/+9
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_TCA642X Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* Convert CONFIG_CMD_PCA953X to KconfigSimon Glass2017-08-111-0/+9
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_PCA953X Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* x86: Convert INTEL_ICH6_GPIO to KconfigBin Meng2017-08-011-0/+6
| | | | | | | | This converts Intel ICH6 GPIO driver to Kconfig, and add it to the imply list of platform drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* gpio: Move OMAP_GPIO to KconfigTom Rini2017-05-151-0/+8
| | | | | | | | This driver is used often enough such that we want to have this enabled by default on any ARCH_OMAP2PLUS board, and this only compiles on ARCH_OMAP2PLUS due to required defines, so mark that as the depends. Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: gpio: add BCM6345 gpio driverÁlvaro Fernández Rojas2017-05-101-0/+6
| | | | | | | | This driver is based on linux/arch/mips/bcm63xx/gpio.c, simplified to allow defining one or two independent banks for each Broadcom SoC. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Add driver for stm32f7 gpio controllerVikas Manocha2017-05-081-0/+9
| | | | | | | | | | This patch adds gpio driver supporting driver model for stm32f7 gpio. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Christophe KERELLO <christophe.kerello@st.com> [trini: Add depends on STM32] Signed-off-by: Tom Rini <trini@konsulko.com>
* gpio: Kconfig: add CONFIG_AT91_GPIO optionWenyou Yang2017-04-131-0/+13
| | | | | | | | The CONFIG_AT91_GPIO option is used to select AT91 PIO GPIO driver. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* gpio: Add Rapid GPIO2P driver for i.MX7ULPPeng Fan2017-03-171-0/+7
| | | | | | | | | | | | | | | | | Add the imx_rgpio2p driver for Rapid GPIO2P controllers on i.MX7ULP. Have added all ports on RGPIO2P_0 and RGPIO2P_1. The configurations CONFIG_IMX_RGPIO2P and CONFIG_DM_GPIO must be set to y to enable the drivers. To use the GPIO function, the IBE and OBE needs to set in IOMUXC. We did not set the bits in driver, but leave them to IOMUXC settings of the GPIO pins. User should use IMX_GPIO_NR to generate the GPIO number for gpio APIs access. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by : Stefano Babic <sbabic@denx.de>
* gpio: atmel_pio4: Rework to support DM & DTWenyou Yang2016-08-151-1/+1
| | | | | | | | | Rework the driver to support driver model and device tree, and support to regard the pio4 pinctrl device as a child of atmel_pio4 device. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* gpio: Add driver for TI PCF8575 I2C GPIO expanderVignesh R2016-08-081-0/+7
| | | | | | | | | | | | | | | | | | TI's PCF8575 is a 16-bit I2C GPIO expander.The device features a 16-bit quasi-bidirectional I/O ports. Each quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal. The I/Os should be high before being used as inputs. Read the device documentation for more details[1]. This driver is based on pcf857x driver available in Linux v4.7 kernel. It supports basic reading and writing of gpio pins. [1] http://www.ti.com/lit/ds/symlink/pcf8575.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2016-06-041-0/+26
|\
| * dm: gpio: Implement open drain for MPC85XX GPIOmario.six@gdsys.cc2016-06-031-3/+3
| | | | | | | | | | | | | | | | | | This patch implements the open-drain setting feature for the MPC85XX GPIO controller. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
| * dm: gpio: Add driver for MPC85XX GPIO controllermario.six@gdsys.cc2016-06-031-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for the built-in GPIO controller of the MPC85XX SoC (probably supporting other PowerQUICC III SoCs as well). Each GPIO bank is identified by its own entry in the device tree, i.e. gpio-controller@fc00 { #gpio-cells = <2>; compatible = "fsl,pq3-gpio"; reg = <0xfc00 0x100> } By default, each bank is assumed to have 32 GPIOs, but the ngpios setting is honored, so the number of GPIOs for each bank in configurable to match the actual GPIO count of the SoC (e.g. the 32/32/23 banks of the P1022 SoC). The usual functions of GPIO drivers (setting input/output mode and output value setting) are supported. The driver has been tested on MPC85XX, but it is likely that other PowerQUICC III devices will work as well. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
* | gpio: add Tegra186 GPIO driverStephen Warren2016-05-311-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra186's GPIO controller register layout is significantly different from previous chips, so add a new driver for it. In fact, there are two different GPIO controllers in Tegra186 that share a similar register layout, but very different port mapping. This driver covers both. The DT binding is already present in the Linux kernel (in linux-next via the Tegra tree so far). Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # v1 Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: convert CONFIG_TEGRA_GPIO to KconfigStephen Warren2016-05-311-0/+7
|/ | | | | | | | | | | | | | Future chips will contain different GPIO HW. This change will enable future SoC support to select the appropriate GPIO driver for their HW, in a future-looking fashion, using Kconfig. TEGRA_GPIO is not simply selected by TEGRA_COMMON (even though all current Tegra chips used this GPIO HW) to simplify the later addition of support for Tegra SoCs that use different GPIO HW. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* dm: gpio: introduce 74x164 driverPeng Fan2016-05-171-0/+8
| | | | | | | | | | | | | | | | | | | | Introduce driver to support "fairchild,74hc595" devices. 1. Take linux drivers/drivers/gpio/gpio-74x164.c as reference. 2. Following the naming used in Linux driver with gen_7x164 as the prefix. 3. Enable CONFIG_DM_74X164 to use this driver. 4. Follow Documentation/devicetree/bindings/gpio/gpio-74x164.txt to add device nodes 5. Tested on i.MX6 UltraLite with 74LV595 using gpio command and oscillograph. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Chin Liang See <clsee@altera.com> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: gpio: pca953x: introduce driver model support for pca953xPeng Fan2016-05-171-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new driver that supports driver model for pca953x. The pca953x chips are used as I2C I/O expanders. This driver is designed to support the following chips: " 4 bits: pca9536, pca9537 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, pca9556, pca9557, pca9574, tca6408, xra1202 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, tca6416 24 bits: tca6424 40 bits: pca9505, pca9698 " But for now this driver only supports max 24 bits and pca953x compatible chips. pca957x compatible chips are not supported now. These can be addressed when we need to add such support for the different chips. This driver has been tested on i.MX6 SoloX Sabreauto board with max7310 i2c expander using gpio command as following: =>gpio status -a Bank gpio@30_: gpio@30_0: input: 1 [ ] => dm tree: i2c [ ] | | `-- i2c@021a8000 gpio [ ] | | |-- gpio@30 gpio [ ] | | `-- gpio@32 Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Andrea Scian <andrea.scian@dave.eu> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Michal Simek <michal.simek@xilinx.com> #on ZynqMP zcu102
* zynqmp: Kconfig: Enable ZYNQ_GPIO for ZynqMPSiva Durga Prasad Paladugu2016-04-131-1/+1
| | | | | | | | Enable ZYNQ_GPIO for ZynqMP using Kconfig. It enables the GPIO driver support for ZynqMP. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* gpio: Kconfig: Enable Zynq GPIO driver using kconfigSiva Durga Prasad Paladugu2016-04-131-0/+7
| | | | | | | | Enable DM GPIO and ZYNQ GPIO using kconfig instead of the board config file. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* gpio: Add support for Qualcomm PM8916 gpiosMateusz Kulikowski2016-04-011-0/+10
| | | | | | | | | | | This driver supports GPIOs present on PM8916 PMIC. There are 2 device drivers inside: - GPIO driver (4 "generic" GPIOs) - Keypad driver that presents itself as GPIO with 2 inputs (power and reset) Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* gpio: Add support for Qualcomm gpio controllerMateusz Kulikowski2016-04-011-0/+14
| | | | | | | | | | Add support for gpio controllers on Qualcomm Snapdragon devices. This devices are usually called Top Level Mode Multiplexing in Qualcomm documentation. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* gpio: Add DM GPIO driver for Marvell MVEBUStefan Roese2016-03-241-0/+7
| | | | | | | | | | | | | | | | | | This patch adds a DM GPIO driver for the Marvell MVEBU SoCs. There are other non-DM drivers that might be used on these platforms. But this patch creates a new DM driver. Which will be used by all Armada XP/38x boards. Other MVEBU SoC (Kirkwood / Orion) may follow once they support DM as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by: Stefan Roese <sr@denx.de>
* x86: broadwell: Add a GPIO driverSimon Glass2016-03-171-0/+9
| | | | | | | Add a GPIO driver for the GPIO peripheral found on broadwell devices. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* gpio: uniphier: add driver for UniPhier GPIO controllerMasahiro Yamada2016-02-291-0/+6
| | | | | | | This GPIO controller device is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* drivers: gpio: add driver for Microchip PIC32 GPIO controller.Purna Chandra Mandal2016-02-011-0/+7
| | | | | | | | | | | | In PIC32 GPIO controller is part of PIC32 pin controller. PIC32 has ten independently programmable ports and each with multiple pins. Each of these pins can be configured and used as GPIO, provided they are not in use for other peripherals. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* gpio: atmel: Add the PIO4 driver supportWenyou Yang2015-11-301-0/+11
| | | | | | | The PIO4 is introduced from SAMA5D2, as a new version for Atmel PIO controller. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
* nios2 : convert altera_pio to driver modelThomas Chou2015-10-231-0/+7
| | | | | | | | Convert altera_pio to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* rockchip: gpio: Add rockchip GPIO driverSimon Glass2015-09-021-0/+9
| | | | | | | This supports RK3288 at present. It does not implement functions or support for pull up/down. Signed-off-by: Simon Glass <sjg@chromium.org>
* gpio: Add DW APB GPIO driverMarek Vasut2015-08-231-0/+7
| | | | | | | | Add driver for the DesignWare APB GPIO IP block. This driver is DM capable and probes from DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org>
* drivers: hierarchize drivers Kconfig menuMasahiro Yamada2015-08-121-0/+8
| | | | | | | | | | | The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: gpio: vf610: Add GPIO driver supportBhuvanchandra DV2015-06-081-0/+7
| | | | | | Add GPIO driver support to Freescale VF610 Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
* sandbox: Move GPIO CONFIGs to KconfigSimon Glass2015-04-181-0/+21
| | | | | | Move these over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* lpc32xx: add GPIO supportAlbert ARIBAUD \(3ADEV\)2015-04-101-0/+7
| | | | | | This driver only supports Driver Model, not legacy model. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* dm: Expand and complete Kconfig in drivers/Simon Glass2015-02-121-2/+5
| | | | | | | | Expand the help messages for each driver. Add missing Kconfig for I2C, SPI flash and thermal. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dm: add entries to KconfigMasahiro Yamada2014-10-231-0/+6
| | | | | | | | Create entries of CONFIG_DM, CONFIG_DM_SERIAL, CONFIG_DM_GPIO and CONFIG_DM_SPI. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* kconfig: add blank Kconfig filesMasahiro Yamada2014-09-241-0/+0
This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-11-19 11:37:25 +0000