summaryrefslogtreecommitdiffstats
path: root/doc/board
Commit message (Collapse)AuthorAgeFilesLines
* board: kontron: add sl28 supportMichael Walle2020-10-233-0/+170
| | | | | | | | | | | | | | | | | Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* riscv: Add FPIOA and GPIO support for Kendryte K210Sean Anderson2020-10-081-2/+62
| | | | | | | This patch adds the necessary configs and docs for FPIOA and GPIO support on the K210. Signed-off-by: Sean Anderson <seanga2@gmail.com>
* Merge tag 'u-boot-amlogic-20201005' of ↵Tom Rini2020-10-062-0/+54
|\ | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - generate unique mac address from SoC serial on S400 board - Add USB support for GXL and AXG SoCs - Update Gadget code to use the new GXL and AXG USB glue driver - Add a VIM3 board support to add dynamic PCIe enable in OS DT - Fix AXG pinmux with requesting GPIOs - Add missing GPIOA_18 for AXG pinctrl - Add Amlogic PWM driver
| * board: amlogic: vim3: add support for dynamic PCIe enableNeil Armstrong2020-10-052-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. This adds this dynamic switching right before booting Linux and the configuration steps in the boards documentation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed warning by replacing min() by min_t()]
* | doc/sipeed/maix: describe RESET and BOOT buttonHeinrich Schuchardt2020-09-301-2/+6
| | | | | | | | | | | | | | In the boot flow description add the RESET and BOOT button as well as the function of the DTR and RTS lines of the serial interface. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | doc: correct kflash settings for Maix One DockHeinrich Schuchardt2020-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | The correct kflash parameter value for the Maix One Dock is "dan". See: https://github.com/sipeed/platform-kendryte210/blob/master/boards/sipeed-maix-one-dock.json#L22 Fixes: 137dc153fda9 ("doc: riscv: Update documentation for Sipeed MAIX boards") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | x86: edison: Add documentation for using am xFSTK imageSimon Glass2020-09-251-0/+120
|/ | | | | | | Add a description of how to flash Edison using the xFSTK tool. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* Merge tag 'u-boot-imx-20200918' of ↵Tom Rini2020-09-182-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx ---------------------------------------------------------------- Fixes for 2020.10 ----------------- - Toradex boards - mx6qsabrelite: fix env offset - esdhc_imx: waiting for clock instead of sleep - dyn RAM calibration for entry point i.MX6 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/728274602
| * apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker2020-09-171-1/+1
| | | | | | | | | | | | | | | | The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker2020-09-171-1/+1
| | | | | | | | | | | | | | | | The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
* | doc: qemu: debug UART settings for QEMU ARM virtHeinrich Schuchardt2020-09-161-0/+10
|/ | | | | | Provide the settings for the debug UART on the QEMU ARM virt board. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* configs: defconfig for Sipeed Maix in S-modeHeinrich Schuchardt2020-08-251-0/+49
| | | | | | | | | | | Provide a defconfig that can be used to build U-Boot for the Maix boards running upon OpenSBI. Update the documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
* doc: xen: Add Xen guest ARM64 board documentationAnastasiia Lukianenko2020-08-143-0/+91
| | | | Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
* doc: riscv: debug UART for MAIXHeinrich Schuchardt2020-08-141-0/+10
| | | | | | | Provide the required settings for the debug UART. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
* doc: riscv: Update documentation for Sipeed MAIX boardsHeinrich Schuchardt2020-08-141-9/+66
| | | | | | | | The MAIXDUINO runs fine with the sipeed_maix_bitm_defconfig but a different board id parameter should be passed to kflash. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com>
* doc: qemu-mips build instructionsHeinrich Schuchardt2020-08-031-4/+4
| | | | | | Correct the make commands for the defconfigs. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* sifive: fu540: Add Booting from SPIJagan Teki2020-07-241-0/+41
| | | | | | | | Add booting from SPI for SiFive Unleashed board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
* x86: coral: Update the memory mapSimon Glass2020-07-201-0/+1
| | | | | | | | | This currently excludes the temporary memory used to start up the APs. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
* Merge tag 'u-boot-amlogic-20200708' of ↵Tom Rini2020-07-082-1/+136
|\ | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Add proper Odroid-N2 board support code - Add support for Odroid-C4 single board computer
| * boards: amlogic: add Odroid C4 supportChristian Hewitt2020-07-082-1/+136
| | | | | | | | | | | | | | | | | | | | Odroid C4 is an Amlogic SM1 device, the board config and board documentation are adapted from the Odroid-N2 support from the same vendor. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: fix odroid-c4.rst typos and structure] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
* | Merge branch 'next'Tom Rini2020-07-066-0/+528
|\ \ | |/ |/| | | | | Merge all outstanding changes from the current next branch in now that we have released.
| * doc: riscv: Add documentation for Sipeed Maix BitSean Anderson2020-07-013-0/+308
| | | | | | | | | | | | | | This patch adds documentation for the Sipeed Maix bit, and more generally for the Kendryte K210 processor. Signed-off-by: Sean Anderson <seanga2@gmail.com>
| * Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini2020-06-301-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
| * \ Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini2020-06-2521-0/+2173
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
| | * | doc: board: xilinx: zynq.rst: add description how to flash a SD cardJohannes Krottmayer2020-06-241-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a short description in the ZYNQ documentation how to prepare a SD card and copy the related images to SD card. Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | board: tbs2910: add documentationDenis 'GNUtoo' Carikli2020-06-123-0/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This documents the u-boot installation procedure and the hardware in order to get started. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> [trini: Add MAINTAINERS entry for doc file per Soeren's request]
* | | | doc: qemu-riscv: Update QEMU run commandBin Meng2020-07-031-5/+5
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicitly pass the "-bios" option to QEMU to run U-Boot, instead of the "-kernel" option, as we know that "-bios" behavior will be changed since QEMU 5.1.0. This also updates validated QEMU version to 5.0.0. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
* | | doc: sifive: Fix spelling of "environment".Vagrant Cascadian2020-06-231-2/+2
| |/ |/| | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
* | board: amlogic: move boards doc into doc/board/amlogicNeil Armstrong2020-06-1820-0/+2154
|/ | | | | | | | | | Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* doc: rockchip: Document SPI flash program stepsJagan Teki2020-06-071-1/+25
| | | | | | | | Document SPI flash program steps for rockchip platforms. Suggested-by: Hugh Cole-Baker <sigmaris@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3328: add rock-pi-e-rk3328_defconfig fileb.l.huang2020-06-071-0/+1
| | | | | | | This commit add the default configuration file and relevant description for rock-pi-e board Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
* doc: sifive: fu540: Add description for OpenSBI generic platformPragnesh Patel2020-06-041-12/+1
| | | | | | | | | | | | | OpenSBI generic platform support provides platform specific functionality based on the FDT passed by previous booting stage. Depends on OpenSBI commit: platform: Add generic FDT based platform support (sha1: f1aa9e54e00006ae70aeac638d5b75093520f65d) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* configs: fu540: Add config options for U-Boot SPLPragnesh Patel2020-06-041-0/+124
| | | | | | | | | | | | | | | | | | | | | | | | With sifive_fu540_defconfig: User can use FSBL or u-boot-spl.bin anyone at a time. For FSBL, fsbl->fw_payload.bin (opensbi + U-Boot) For u-boot-spl.bin, u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT image u-boot.itb from SD card into RAM. U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985" Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* cubieboard7: Remove ARCH= references from documentationTom Rini2020-06-021-1/+1
| | | | | | | | | | | | When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Amit Singh Tomar <amittomer25@gmail.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
* fu540: Remove ARCH= references from documentationTom Rini2020-06-021-1/+0
| | | | | | | | | | | | | When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* imx: Remove ARCH= references from documentationTom Rini2020-06-021-1/+0
| | | | | | | | | | | | When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford <aford173@gmail.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* doc: board: rockchip: Add missing supported boardsWalter Lozano2020-05-291-0/+16
| | | | | | | | | Update the list of supported boards with the information available on doc/README.rockchip. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* doc: board: rockchip: Improve supported board list formatWalter Lozano2020-05-291-34/+34
| | | | | | | | | | | As an additional step to move documentation to doc/boards/rockchip improve format of the supported board list to make it more readable. Additionally, add the configuration files used to build them based on doc/README.rockchip. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* doc: rockchip: Document eMMC program stepsJagan Teki2020-05-291-2/+30
| | | | | | | | Document eMMC partition creation and program steps for rockchip platforms. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* doc: stm32mp1: update DFU support examplePatrick Delaunay2020-05-141-61/+54
| | | | | | | | Update stm32mp1 board documentation with new management of MMC and MTD partitions and new PID df11. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* configs: stm32mp1: remove optee defconfigPatrick Delaunay2020-05-141-25/+7
| | | | | | | | As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig is identical to stm32mp15_trusted_defconfig and can be removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* x86: Add a 64-bit 'coreboot64' buildSimon Glass2020-05-041-0/+10
| | | | | | | | | | | | | | | | | | | | Coreboot is a first-stage bootloader mostly used on x86 devices as an alternative to UEFI. Coreboot runs in 32-bit mode. U-Boot currently supports booting from coreboot as a second-stage bootloader, also in 32-bit mode. However it is useful to be able to run U-Boot in 64-bit mode. To do this we can have a 32-bit SPL which switches over the CPU and jumps to a 64-bit U-Boot proper. Add a new 'coreboot64' board for running 64-bit U-Boot from coreboot. This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot. This allows running 64-bit EFI images on x86, for example, without needing a native U-Boot port for a board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* doc: boards: add Cubieboard7 documentationAmit Singh Tomar2020-04-243-0/+125
| | | | | | | | This adds build and flash steps for Actions S700 based Cubieboard7 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
* ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 boardMarek Vasut2020-04-241-4/+4
| | | | | | | | | | | | | | | | | | The AV96 is in fact an assembly of DH Electronics DHCOR SoM on top of an AV96 reference board. Split the DTs to reflect that and make sure to DHCOR SoM can be reused on other boards easily. It is also highly recommended to configure the board for the DHCOM make stm32mp15_dhcom_basic_defconfig make DEVICE_TREE=stm32mp15xx-dhcor-avenger96 as that permits reusing the board code for the DH components, like accessing and reading out the ethernet MAC from EEPROM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: I7db47280d4eb0d668eb4e006355240271154f97f
* riscv: qemu: Remove the simple-bus driver for the SoC nodeBin Meng2020-04-231-1/+1
| | | | | | | | | | | | | Prior to QEMU v3.1.0, QEMU generated the 'virt' SoC node with a "riscv-virtio-soc" compatible string, and a "simple-bus" driver was created to accommodate that special case in U-Boot. Starting from QEMU v3.1.0, the SoC node was set as a "simple-bus", hence the special simple-bus driver is no longer needed. Update the doc to mention the latest tested QEMU version 4.2.0. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* image: Add compressed Image parsing support in booti.Atish Patra2020-04-171-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | Add compressed Image parsing support so that booti can parse both flat and compressed Image to boot Linux. Currently, it is difficult to calculate a safe address for every board where the compressed image can be decompressed. It is also not possible to figure out the size of the compressed file as well. Thus, user need to set two additional environment variables kernel_comp_addr_r and filesize to make this work. Following compression methods are supported for now. lzma, lzo, bzip2, gzip. lz4 support is not added as ARM64 kernel generates a lz4 compressed image with legacy header which U-Boot doesn't know how to parse and decompress. Tested on HiFive Unleashed and Qemu for RISC-V. Tested on Qemu for ARM64. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix minor rST formatting problems] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'next'Tom Rini2020-04-132-11/+34
|\ | | | | | | | | | | | | | | | | | | | | Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
| * Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini2020-04-072-21/+8
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <trini@konsulko.com>
| | * ARM: zynq: Switch to single zynq configurationsMichal Simek2020-04-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a lot of zynq configurations which can be merged together and use only one for all. The similar change has been done for ZynqMP by commit be1b6c32d940 ("arm64: zynqmp: Use zynqmp_virt platform") Build SPL with u-boot.img for zc706 like this. export DEVICE_TREE=zynq-zc706 && make xilinx_zynq_virt_defconfig && make -j8 u-boot.img is generic for all boards. Tested on Zybo, zc702, zc706, zc770-xm011-x16, cc108 and microzed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | stm32mp1: add 800 MHz profile supportPatrick Delaunay2020-03-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The STM32MP1 series is available in 3 different lines which are pin-to-pin compatible: - STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD - STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz and CAN FD - STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz Each line comes with a security option (cryptography & secure boot) & a Cortex-A frequency option : - A : Cortex-A7 @ 650 MHz - C : Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz - D : Cortex-A7 @ 800 MHz - F : Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz This patch adds the support of STM32MP15xD and STM32MP15xF in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2025-04-20 13:26:50 +0000